| 2014-06-07 18:21:13 |
Sayantan Das |
bug |
|
|
added bug |
| 2014-06-07 18:21:13 |
Sayantan Das |
attachment added |
|
dmesg https://bugs.launchpad.net/bugs/1327598/+attachment/4127225/+files/dmesg |
|
| 2014-06-07 18:22:11 |
Sayantan Das |
description |
I tried installing bumblebee with nvidia-337 graphics driver. Bumblebee does not work.
attached is the dmesg log |
I tried installing bumblebee with nvidia-337 graphics driver. Bumblebee does not work.
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia-337
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-337
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-337:/usr/lib32/nvidia-337
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-337/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
attached is the dmesg log |
|
| 2014-06-07 18:22:46 |
Sayantan Das |
summary |
running bumblebee in Ubuntu 14.04 resutls in call trace in logs |
running bumblebee in Ubuntu 14.04 results in call trace in logs |
|
| 2014-06-07 18:30:10 |
Brad Figg |
linux (Ubuntu): status |
New |
Incomplete |
|
| 2014-06-07 18:30:15 |
Brad Figg |
tags |
|
trusty |
|
| 2014-06-07 19:03:07 |
Sayantan Das |
tags |
trusty |
apport-collected trusty |
|
| 2014-06-07 19:03:08 |
Sayantan Das |
description |
I tried installing bumblebee with nvidia-337 graphics driver. Bumblebee does not work.
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia-337
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-337
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-337:/usr/lib32/nvidia-337
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-337/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
attached is the dmesg log |
I tried installing bumblebee with nvidia-337 graphics driver. Bumblebee does not work.
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia-337
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-337
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-337:/usr/lib32/nvidia-337
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-337/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
attached is the dmesg log
---
ApportVersion: 2.14.1-0ubuntu3.2
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC1: sayantan 2374 F.... pulseaudio
/dev/snd/controlC0: sayantan 2374 F.... pulseaudio
DistroRelease: Ubuntu 14.04
HibernationDevice: RESUME=UUID=bf97d424-fc0a-40d8-a799-ee28fc70d432
InstallationDate: Installed on 2014-06-01 (6 days ago)
InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
MachineType: Dell Inc. Vostro 3300
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-27-generic root=UUID=0cdd0302-af0e-41f3-9d3c-5992d54b61c8 ro persistent quiet splash
ProcVersionSignature: Ubuntu 3.13.0-27.50-generic 3.13.11
RelatedPackageVersions:
linux-restricted-modules-3.13.0-27-generic N/A
linux-backports-modules-3.13.0-27-generic N/A
linux-firmware 1.127.2
Tags: trusty
Uname: Linux 3.13.0-27-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm bumblebee cdrom dip lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 10/25/2010
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A10
dmi.board.name: 07JC8T
dmi.board.vendor: Dell Inc.
dmi.board.version: A10
dmi.chassis.type: 8
dmi.chassis.vendor: Dell Inc.
dmi.chassis.version: A10
dmi.modalias: dmi:bvnDellInc.:bvrA10:bd10/25/2010:svnDellInc.:pnVostro3300:pvrA10:rvnDellInc.:rn07JC8T:rvrA10:cvnDellInc.:ct8:cvrA10:
dmi.product.name: Vostro 3300
dmi.product.version: A10
dmi.sys.vendor: Dell Inc. |
|
| 2014-06-07 19:03:11 |
Sayantan Das |
attachment added |
|
AlsaInfo.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127244/+files/AlsaInfo.txt |
|
| 2014-06-07 19:03:15 |
Sayantan Das |
attachment added |
|
BootDmesg.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127245/+files/BootDmesg.txt |
|
| 2014-06-07 19:03:18 |
Sayantan Das |
attachment added |
|
CRDA.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127246/+files/CRDA.txt |
|
| 2014-06-07 19:03:20 |
Sayantan Das |
attachment added |
|
CurrentDmesg.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127247/+files/CurrentDmesg.txt |
|
| 2014-06-07 19:03:22 |
Sayantan Das |
attachment added |
|
IwConfig.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127248/+files/IwConfig.txt |
|
| 2014-06-07 19:03:24 |
Sayantan Das |
attachment added |
|
Lspci.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127249/+files/Lspci.txt |
|
| 2014-06-07 19:03:26 |
Sayantan Das |
attachment added |
|
Lsusb.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127250/+files/Lsusb.txt |
|
| 2014-06-07 19:03:28 |
Sayantan Das |
attachment added |
|
ProcCpuinfo.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127251/+files/ProcCpuinfo.txt |
|
| 2014-06-07 19:03:30 |
Sayantan Das |
attachment added |
|
ProcEnviron.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127252/+files/ProcEnviron.txt |
|
| 2014-06-07 19:03:32 |
Sayantan Das |
attachment added |
|
ProcInterrupts.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127253/+files/ProcInterrupts.txt |
|
| 2014-06-07 19:03:34 |
Sayantan Das |
attachment added |
|
ProcModules.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127254/+files/ProcModules.txt |
|
| 2014-06-07 19:03:35 |
Sayantan Das |
attachment added |
|
PulseList.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127255/+files/PulseList.txt |
|
| 2014-06-07 19:03:38 |
Sayantan Das |
attachment added |
|
RfKill.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127256/+files/RfKill.txt |
|
| 2014-06-07 19:03:45 |
Sayantan Das |
attachment added |
|
UdevDb.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127257/+files/UdevDb.txt |
|
| 2014-06-07 19:03:59 |
Sayantan Das |
attachment added |
|
UdevLog.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127258/+files/UdevLog.txt |
|
| 2014-06-07 19:04:15 |
Sayantan Das |
attachment added |
|
WifiSyslog.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127259/+files/WifiSyslog.txt |
|
| 2014-06-07 19:06:59 |
Sayantan Das |
description |
I tried installing bumblebee with nvidia-337 graphics driver. Bumblebee does not work.
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia-337
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-337
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-337:/usr/lib32/nvidia-337
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-337/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
attached is the dmesg log
---
ApportVersion: 2.14.1-0ubuntu3.2
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC1: sayantan 2374 F.... pulseaudio
/dev/snd/controlC0: sayantan 2374 F.... pulseaudio
DistroRelease: Ubuntu 14.04
HibernationDevice: RESUME=UUID=bf97d424-fc0a-40d8-a799-ee28fc70d432
InstallationDate: Installed on 2014-06-01 (6 days ago)
InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
MachineType: Dell Inc. Vostro 3300
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-27-generic root=UUID=0cdd0302-af0e-41f3-9d3c-5992d54b61c8 ro persistent quiet splash
ProcVersionSignature: Ubuntu 3.13.0-27.50-generic 3.13.11
RelatedPackageVersions:
linux-restricted-modules-3.13.0-27-generic N/A
linux-backports-modules-3.13.0-27-generic N/A
linux-firmware 1.127.2
Tags: trusty
Uname: Linux 3.13.0-27-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm bumblebee cdrom dip lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 10/25/2010
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A10
dmi.board.name: 07JC8T
dmi.board.vendor: Dell Inc.
dmi.board.version: A10
dmi.chassis.type: 8
dmi.chassis.vendor: Dell Inc.
dmi.chassis.version: A10
dmi.modalias: dmi:bvnDellInc.:bvrA10:bd10/25/2010:svnDellInc.:pnVostro3300:pvrA10:rvnDellInc.:rn07JC8T:rvrA10:cvnDellInc.:ct8:cvrA10:
dmi.product.name: Vostro 3300
dmi.product.version: A10
dmi.sys.vendor: Dell Inc. |
I tried installing bumblebee with nvidia-337 graphics driver. Bumblebee does not work.
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia-337
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-337
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-337:/usr/lib32/nvidia-337
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-337/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
attached is the dmesg log
---
ApportVersion: 2.14.1-0ubuntu3.2
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC1: sayantan 2374 F.... pulseaudio
/dev/snd/controlC0: sayantan 2374 F.... pulseaudio
DistroRelease: Ubuntu 14.04
HibernationDevice: RESUME=UUID=bf97d424-fc0a-40d8-a799-ee28fc70d432
InstallationDate: Installed on 2014-06-01 (6 days ago)
InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
MachineType: Dell Inc. Vostro 3300
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-27-generic root=UUID=0cdd0302-af0e-41f3-9d3c-5992d54b61c8 ro persistent quiet splash
ProcVersionSignature: Ubuntu 3.13.0-27.50-generic 3.13.11
RelatedPackageVersions:
linux-restricted-modules-3.13.0-27-generic N/A
linux-backports-modules-3.13.0-27-generic N/A
linux-firmware 1.127.2
Tags: trusty
Uname: Linux 3.13.0-27-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm bumblebee cdrom dip lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 10/25/2010
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A10
dmi.board.name: 07JC8T
dmi.board.vendor: Dell Inc.
dmi.board.version: A10
dmi.chassis.type: 8
dmi.chassis.vendor: Dell Inc.
dmi.chassis.version: A10
dmi.modalias: dmi:bvnDellInc.:bvrA10:bd10/25/2010:svnDellInc.:pnVostro3300:pvrA10:rvnDellInc.:rn07JC8T:rvrA10:cvnDellInc.:ct8:cvrA10:
dmi.product.name: Vostro 3300
dmi.product.version: A10
dmi.sys.vendor: Dell Inc.
---
ApportVersion: 2.14.1-0ubuntu3.2
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC1: sayantan 2374 F.... pulseaudio
/dev/snd/controlC0: sayantan 2374 F.... pulseaudio
CurrentDesktop: Unity
DistroRelease: Ubuntu 14.04
HibernationDevice: RESUME=UUID=bf97d424-fc0a-40d8-a799-ee28fc70d432
InstallationDate: Installed on 2014-06-01 (6 days ago)
InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
MachineType: Dell Inc. Vostro 3300
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-27-generic root=UUID=0cdd0302-af0e-41f3-9d3c-5992d54b61c8 ro persistent quiet splash
ProcVersionSignature: Ubuntu 3.13.0-27.50-generic 3.13.11
RelatedPackageVersions:
linux-restricted-modules-3.13.0-27-generic N/A
linux-backports-modules-3.13.0-27-generic N/A
linux-firmware 1.127.2
Tags: trusty
Uname: Linux 3.13.0-27-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm bumblebee cdrom dip lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 10/25/2010
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A10
dmi.board.name: 07JC8T
dmi.board.vendor: Dell Inc.
dmi.board.version: A10
dmi.chassis.type: 8
dmi.chassis.vendor: Dell Inc.
dmi.chassis.version: A10
dmi.modalias: dmi:bvnDellInc.:bvrA10:bd10/25/2010:svnDellInc.:pnVostro3300:pvrA10:rvnDellInc.:rn07JC8T:rvrA10:cvnDellInc.:ct8:cvrA10:
dmi.product.name: Vostro 3300
dmi.product.version: A10
dmi.sys.vendor: Dell Inc. |
|
| 2014-06-07 19:07:01 |
Sayantan Das |
attachment added |
|
AlsaInfo.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127260/+files/AlsaInfo.txt |
|
| 2014-06-07 19:07:05 |
Sayantan Das |
attachment added |
|
BootDmesg.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127261/+files/BootDmesg.txt |
|
| 2014-06-07 19:07:06 |
Sayantan Das |
attachment added |
|
CRDA.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127262/+files/CRDA.txt |
|
| 2014-06-07 19:07:08 |
Sayantan Das |
attachment added |
|
CurrentDmesg.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127263/+files/CurrentDmesg.txt |
|
| 2014-06-07 19:07:10 |
Sayantan Das |
attachment added |
|
IwConfig.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127264/+files/IwConfig.txt |
|
| 2014-06-07 19:07:12 |
Sayantan Das |
attachment added |
|
Lspci.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127265/+files/Lspci.txt |
|
| 2014-06-07 19:07:14 |
Sayantan Das |
attachment added |
|
Lsusb.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127266/+files/Lsusb.txt |
|
| 2014-06-07 19:07:16 |
Sayantan Das |
attachment added |
|
ProcCpuinfo.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127267/+files/ProcCpuinfo.txt |
|
| 2014-06-07 19:07:17 |
Sayantan Das |
attachment added |
|
ProcEnviron.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127268/+files/ProcEnviron.txt |
|
| 2014-06-07 19:07:19 |
Sayantan Das |
attachment added |
|
ProcInterrupts.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127269/+files/ProcInterrupts.txt |
|
| 2014-06-07 19:07:21 |
Sayantan Das |
attachment added |
|
ProcModules.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127270/+files/ProcModules.txt |
|
| 2014-06-07 19:07:23 |
Sayantan Das |
attachment added |
|
PulseList.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127271/+files/PulseList.txt |
|
| 2014-06-07 19:07:25 |
Sayantan Das |
attachment added |
|
RfKill.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127272/+files/RfKill.txt |
|
| 2014-06-07 19:07:31 |
Sayantan Das |
attachment added |
|
UdevDb.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127273/+files/UdevDb.txt |
|
| 2014-06-07 19:07:45 |
Sayantan Das |
attachment added |
|
UdevLog.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127274/+files/UdevLog.txt |
|
| 2014-06-07 19:08:00 |
Sayantan Das |
attachment added |
|
WifiSyslog.txt https://bugs.launchpad.net/bugs/1327598/+attachment/4127275/+files/WifiSyslog.txt |
|
| 2014-06-07 19:26:39 |
Sayantan Das |
attachment removed |
WifiSyslog.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1327598/+attachment/4127275/+files/WifiSyslog.txt |
|
|
| 2014-06-07 19:27:28 |
Sayantan Das |
linux (Ubuntu): status |
Incomplete |
Confirmed |
|
| 2014-06-09 10:36:28 |
penalvch |
attachment removed |
AlsaInfo.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1327598/+attachment/4127260/+files/AlsaInfo.txt |
|
|
| 2014-06-09 10:36:29 |
penalvch |
attachment removed |
CRDA.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1327598/+attachment/4127262/+files/CRDA.txt |
|
|
| 2014-06-09 10:36:30 |
penalvch |
attachment removed |
BootDmesg.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1327598/+attachment/4127261/+files/BootDmesg.txt |
|
|
| 2014-06-09 10:36:31 |
penalvch |
attachment removed |
CurrentDmesg.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1327598/+attachment/4127263/+files/CurrentDmesg.txt |
|
|
| 2014-06-09 10:36:31 |
penalvch |
attachment removed |
IwConfig.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1327598/+attachment/4127264/+files/IwConfig.txt |
|
|
| 2014-06-09 10:36:33 |
penalvch |
attachment removed |
Lspci.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1327598/+attachment/4127265/+files/Lspci.txt |
|
|
| 2014-06-09 10:36:34 |
penalvch |
attachment removed |
Lsusb.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1327598/+attachment/4127266/+files/Lsusb.txt |
|
|
| 2014-06-09 10:36:34 |
penalvch |
attachment removed |
ProcCpuinfo.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1327598/+attachment/4127267/+files/ProcCpuinfo.txt |
|
|
| 2014-06-09 10:36:36 |
penalvch |
attachment removed |
ProcEnviron.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1327598/+attachment/4127268/+files/ProcEnviron.txt |
|
|
| 2014-06-09 10:36:37 |
penalvch |
attachment removed |
ProcModules.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1327598/+attachment/4127270/+files/ProcModules.txt |
|
|
| 2014-06-09 10:36:38 |
penalvch |
attachment removed |
ProcInterrupts.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1327598/+attachment/4127269/+files/ProcInterrupts.txt |
|
|
| 2014-06-09 10:36:39 |
penalvch |
attachment removed |
PulseList.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1327598/+attachment/4127271/+files/PulseList.txt |
|
|
| 2014-06-09 10:36:40 |
penalvch |
attachment removed |
RfKill.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1327598/+attachment/4127272/+files/RfKill.txt |
|
|
| 2014-06-09 10:36:42 |
penalvch |
attachment removed |
UdevLog.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1327598/+attachment/4127274/+files/UdevLog.txt |
|
|
| 2014-06-09 10:36:43 |
penalvch |
attachment removed |
UdevDb.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1327598/+attachment/4127273/+files/UdevDb.txt |
|
|
| 2014-06-09 10:40:08 |
penalvch |
description |
I tried installing bumblebee with nvidia-337 graphics driver. Bumblebee does not work.
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia-337
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-337
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-337:/usr/lib32/nvidia-337
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-337/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
attached is the dmesg log
---
ApportVersion: 2.14.1-0ubuntu3.2
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC1: sayantan 2374 F.... pulseaudio
/dev/snd/controlC0: sayantan 2374 F.... pulseaudio
DistroRelease: Ubuntu 14.04
HibernationDevice: RESUME=UUID=bf97d424-fc0a-40d8-a799-ee28fc70d432
InstallationDate: Installed on 2014-06-01 (6 days ago)
InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
MachineType: Dell Inc. Vostro 3300
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-27-generic root=UUID=0cdd0302-af0e-41f3-9d3c-5992d54b61c8 ro persistent quiet splash
ProcVersionSignature: Ubuntu 3.13.0-27.50-generic 3.13.11
RelatedPackageVersions:
linux-restricted-modules-3.13.0-27-generic N/A
linux-backports-modules-3.13.0-27-generic N/A
linux-firmware 1.127.2
Tags: trusty
Uname: Linux 3.13.0-27-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm bumblebee cdrom dip lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 10/25/2010
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A10
dmi.board.name: 07JC8T
dmi.board.vendor: Dell Inc.
dmi.board.version: A10
dmi.chassis.type: 8
dmi.chassis.vendor: Dell Inc.
dmi.chassis.version: A10
dmi.modalias: dmi:bvnDellInc.:bvrA10:bd10/25/2010:svnDellInc.:pnVostro3300:pvrA10:rvnDellInc.:rn07JC8T:rvrA10:cvnDellInc.:ct8:cvrA10:
dmi.product.name: Vostro 3300
dmi.product.version: A10
dmi.sys.vendor: Dell Inc.
---
ApportVersion: 2.14.1-0ubuntu3.2
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC1: sayantan 2374 F.... pulseaudio
/dev/snd/controlC0: sayantan 2374 F.... pulseaudio
CurrentDesktop: Unity
DistroRelease: Ubuntu 14.04
HibernationDevice: RESUME=UUID=bf97d424-fc0a-40d8-a799-ee28fc70d432
InstallationDate: Installed on 2014-06-01 (6 days ago)
InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
MachineType: Dell Inc. Vostro 3300
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-27-generic root=UUID=0cdd0302-af0e-41f3-9d3c-5992d54b61c8 ro persistent quiet splash
ProcVersionSignature: Ubuntu 3.13.0-27.50-generic 3.13.11
RelatedPackageVersions:
linux-restricted-modules-3.13.0-27-generic N/A
linux-backports-modules-3.13.0-27-generic N/A
linux-firmware 1.127.2
Tags: trusty
Uname: Linux 3.13.0-27-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm bumblebee cdrom dip lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 10/25/2010
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A10
dmi.board.name: 07JC8T
dmi.board.vendor: Dell Inc.
dmi.board.version: A10
dmi.chassis.type: 8
dmi.chassis.vendor: Dell Inc.
dmi.chassis.version: A10
dmi.modalias: dmi:bvnDellInc.:bvrA10:bd10/25/2010:svnDellInc.:pnVostro3300:pvrA10:rvnDellInc.:rn07JC8T:rvrA10:cvnDellInc.:ct8:cvrA10:
dmi.product.name: Vostro 3300
dmi.product.version: A10
dmi.sys.vendor: Dell Inc. |
I tried installing bumblebee with nvidia-337 graphics driver. Bumblebee does not work.
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia-337
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-337
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-337:/usr/lib32/nvidia-337
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-337/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
attached is the dmesg log
---
ApportVersion: 2.14.1-0ubuntu3.2
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC1: sayantan 2374 F.... pulseaudio
/dev/snd/controlC0: sayantan 2374 F.... pulseaudio
DistroRelease: Ubuntu 14.04
HibernationDevice: RESUME=UUID=bf97d424-fc0a-40d8-a799-ee28fc70d432
InstallationDate: Installed on 2014-06-01 (6 days ago)
InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
MachineType: Dell Inc. Vostro 3300
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-27-generic root=UUID=0cdd0302-af0e-41f3-9d3c-5992d54b61c8 ro persistent quiet splash
ProcVersionSignature: Ubuntu 3.13.0-27.50-generic 3.13.11
RelatedPackageVersions:
linux-restricted-modules-3.13.0-27-generic N/A
linux-backports-modules-3.13.0-27-generic N/A
linux-firmware 1.127.2
Tags: trusty
Uname: Linux 3.13.0-27-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm bumblebee cdrom dip lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 10/25/2010
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A10
dmi.board.name: 07JC8T
dmi.board.vendor: Dell Inc.
dmi.board.version: A10
dmi.chassis.type: 8
dmi.chassis.vendor: Dell Inc.
dmi.chassis.version: A10
dmi.modalias: dmi:bvnDellInc.:bvrA10:bd10/25/2010:svnDellInc.:pnVostro3300:pvrA10:rvnDellInc.:rn07JC8T:rvrA10:cvnDellInc.:ct8:cvrA10:
dmi.product.name: Vostro 3300
dmi.product.version: A10
dmi.sys.vendor: Dell Inc. |
|
| 2014-06-09 10:41:20 |
penalvch |
tags |
apport-collected trusty |
apport-collected latest-bios-a10 needs-call-trace trusty |
|
| 2014-06-09 10:47:19 |
penalvch |
description |
I tried installing bumblebee with nvidia-337 graphics driver. Bumblebee does not work.
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia-337
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-337
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-337:/usr/lib32/nvidia-337
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-337/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
attached is the dmesg log
---
ApportVersion: 2.14.1-0ubuntu3.2
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC1: sayantan 2374 F.... pulseaudio
/dev/snd/controlC0: sayantan 2374 F.... pulseaudio
DistroRelease: Ubuntu 14.04
HibernationDevice: RESUME=UUID=bf97d424-fc0a-40d8-a799-ee28fc70d432
InstallationDate: Installed on 2014-06-01 (6 days ago)
InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
MachineType: Dell Inc. Vostro 3300
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-27-generic root=UUID=0cdd0302-af0e-41f3-9d3c-5992d54b61c8 ro persistent quiet splash
ProcVersionSignature: Ubuntu 3.13.0-27.50-generic 3.13.11
RelatedPackageVersions:
linux-restricted-modules-3.13.0-27-generic N/A
linux-backports-modules-3.13.0-27-generic N/A
linux-firmware 1.127.2
Tags: trusty
Uname: Linux 3.13.0-27-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm bumblebee cdrom dip lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 10/25/2010
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A10
dmi.board.name: 07JC8T
dmi.board.vendor: Dell Inc.
dmi.board.version: A10
dmi.chassis.type: 8
dmi.chassis.vendor: Dell Inc.
dmi.chassis.version: A10
dmi.modalias: dmi:bvnDellInc.:bvrA10:bd10/25/2010:svnDellInc.:pnVostro3300:pvrA10:rvnDellInc.:rn07JC8T:rvrA10:cvnDellInc.:ct8:cvrA10:
dmi.product.name: Vostro 3300
dmi.product.version: A10
dmi.sys.vendor: Dell Inc. |
I tried installing bumblebee with nvidia-337 graphics driver. Bumblebee does not work.
WORKAROUND: Don't install bumblebee.
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia-337
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-337
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-337:/usr/lib32/nvidia-337
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-337/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
attached is the dmesg log
---
ApportVersion: 2.14.1-0ubuntu3.2
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC1: sayantan 2374 F.... pulseaudio
/dev/snd/controlC0: sayantan 2374 F.... pulseaudio
DistroRelease: Ubuntu 14.04
HibernationDevice: RESUME=UUID=bf97d424-fc0a-40d8-a799-ee28fc70d432
InstallationDate: Installed on 2014-06-01 (6 days ago)
InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
MachineType: Dell Inc. Vostro 3300
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-27-generic root=UUID=0cdd0302-af0e-41f3-9d3c-5992d54b61c8 ro persistent quiet splash
ProcVersionSignature: Ubuntu 3.13.0-27.50-generic 3.13.11
RelatedPackageVersions:
linux-restricted-modules-3.13.0-27-generic N/A
linux-backports-modules-3.13.0-27-generic N/A
linux-firmware 1.127.2
Tags: trusty
Uname: Linux 3.13.0-27-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm bumblebee cdrom dip lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 10/25/2010
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A10
dmi.board.name: 07JC8T
dmi.board.vendor: Dell Inc.
dmi.board.version: A10
dmi.chassis.type: 8
dmi.chassis.vendor: Dell Inc.
dmi.chassis.version: A10
dmi.modalias: dmi:bvnDellInc.:bvrA10:bd10/25/2010:svnDellInc.:pnVostro3300:pvrA10:rvnDellInc.:rn07JC8T:rvrA10:cvnDellInc.:ct8:cvrA10:
dmi.product.name: Vostro 3300
dmi.product.version: A10
dmi.sys.vendor: Dell Inc. |
|
| 2014-06-09 10:50:58 |
penalvch |
tags |
apport-collected latest-bios-a10 needs-call-trace trusty |
apport-collected latest-bios-a10 trusty |
|
| 2014-06-09 10:53:55 |
penalvch |
linux (Ubuntu): importance |
Undecided |
Low |
|
| 2014-06-09 10:53:55 |
penalvch |
linux (Ubuntu): status |
Confirmed |
Incomplete |
|
| 2014-06-10 07:10:52 |
Sayantan Das |
linux (Ubuntu): status |
Incomplete |
Confirmed |
|
| 2014-06-10 07:11:15 |
Sayantan Das |
tags |
apport-collected latest-bios-a10 trusty |
apport-collected kernel-bug-exists-upstream kernel-bug-exists-upstream-3.14.1 latest-bios-a10 trusty |
|
| 2014-06-10 18:38:15 |
Sayantan Das |
attachment added |
|
-----------------------------1224143649 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1327598/+attachment/4129178/+files/dmesg.txt |
|
| 2014-06-11 00:18:56 |
penalvch |
tags |
apport-collected kernel-bug-exists-upstream kernel-bug-exists-upstream-3.14.1 latest-bios-a10 trusty |
apport-collected kernel-bug-exists-upstream kernel-bug-exists-upstream-3.15 latest-bios-a10 trusty |
|
| 2014-06-11 00:21:55 |
penalvch |
linux (Ubuntu): status |
Confirmed |
Incomplete |
|
| 2014-06-12 08:37:51 |
Sayantan Das |
linux (Ubuntu): status |
Incomplete |
Confirmed |
|
| 2014-06-12 11:42:14 |
penalvch |
linux (Ubuntu): status |
Confirmed |
Triaged |
|
| 2014-06-12 11:42:39 |
penalvch |
summary |
running bumblebee in Ubuntu 14.04 results in call trace in logs |
[Dell Vostro 3300] running bumblebee in Ubuntu 14.04 results in call trace in logs |
|
