auto-update problem
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
MadGraph5_aMC@NLO |
Fix Released
|
Undecided
|
Unassigned |
Bug Description
Dear mg/me team,
I stupidly okayed the installation of the updated version of MG/ME over a working version, but with the wrong configuration, and my madevent is now broken! (how, you ask? I logged in to a random machine on lxplus, rather than directly to my desktop, and updated in my home directory, and I guess it installed something compatible with the config of the local machine over a version that was compatible with the architecture of my physical desktop. Or at least I'm guessing this is what the problem was). Is there a way to redo the update using the machine with the original config? Or roll back the version without screwing anything else up?
Desperately seeking a solution :(
cheers,
Rakhi
Olivier Mattelaer (olivier-mattelaer) wrote : | #1 |
Rakhi Mahbubani (r-mahbubani) wrote : | #2 |
Olivier Mattelaer (olivier-mattelaer) wrote : | #3 |
Hi Rakhi,
Looks like that the modification of one file didn't go through...
Do you have the lines:
subroutine boostm(p,q,m, pboost)
In the following files:
HELAS/boostx.F
and
aloha/template_
Did you modify one of this files by hand at a point?
Cheers,
Olivier
Rakhi Mahbubani (r-mahbubani) wrote : Re: [Bug 1261931] Re: auto-update problem | #4 |
Hi Olivier,
No I don't recall making any changes to those files.
Cheers,
Rakhi
=======
Chemin de l'Esplanade 26
1214 Vernier
Suisse
Tel: (+41) 22 341 29 60
Mob: (+41) 78 320 41 46
=======
=======
"One does not discover new lands without consenting to lose
sight of the shore for a very long time." - Andre Gide
_______
From: Olivier Mattelaer <email address hidden>
To: <email address hidden>
Sent: Monday, January 6, 2014 10:24 AM
Subject: [Bug 1261931] Re: auto-update problem
Hi Rakhi,
Looks like that the modification of one file didn't go through...
Do you have the lines:
subroutine boostm(p,q,m, pboost)
In the following files:
HELAS/boostx.F
and
aloha/template_
Did you modify one of this files by hand at a point?
Cheers,
Olivier
--
You received this bug notification because you are subscribed to the bug
report.
https:/
Title:
auto-update problem
Status in MadGraph5_aMC@NLO Generator:
New
Bug description:
Dear mg/me team,
I stupidly okayed the installation of the updated version of MG/ME
over a working version, but with the wrong configuration, and my
madevent is now broken! (how, you ask? I logged in to a random
machine on lxplus, rather than directly to my desktop, and updated in
my home directory, and I guess it installed something compatible with
the config of the local machine over a version that was compatible
with the architecture of my physical desktop. Or at least I'm
guessing this is what the problem was). Is there a way to redo the
update using the machine with the original config? Or roll back the
version without screwing anything else up?
Desperately seeking a solution :(
cheers,
Rakhi
To manage notifications about this bug go to:
https:/
Olivier Mattelaer (olivier-mattelaer) wrote : | #5 |
So do you have now the boostm line/function in those files?
Cheers,
Olivier
On Jan 6, 2014, at 1:48 PM, Rakhi Mahbubani <email address hidden> wrote:
> Hi Olivier,
>
> No I don't recall making any changes to those files.
>
> Cheers,
>
> Rakhi
>
>
>
> =======
> Chemin de l'Esplanade 26
> 1214 Vernier
> Suisse
>
> Tel: (+41) 22 341 29 60
> Mob: (+41) 78 320 41 46
> =======
> =======
>
> "One does not discover new lands without consenting to lose
> sight of the shore for a very long time." - Andre Gide
>
>
> _______
> From: Olivier Mattelaer <email address hidden>
> To: <email address hidden>
> Sent: Monday, January 6, 2014 10:24 AM
> Subject: [Bug 1261931] Re: auto-update problem
>
>
> Hi Rakhi,
>
> Looks like that the modification of one file didn't go through...
>
>
> Do you have the lines:
> subroutine boostm(p,q,m, pboost)
>
> In the following files:
> HELAS/boostx.F
> and
> aloha/template_
>
> Did you modify one of this files by hand at a point?
>
> Cheers,
>
> Olivier
>
> --
> You received this bug notification because you are subscribed to the bug
> report.
> https:/
>
> Title:
> auto-update problem
>
> Status in MadGraph5_aMC@NLO Generator:
> New
>
> Bug description:
> Dear mg/me team,
>
> I stupidly okayed the installation of the updated version of MG/ME
> over a working version, but with the wrong configuration, and my
> madevent is now broken! (how, you ask? I logged in to a random
> machine on lxplus, rather than directly to my desktop, and updated in
> my home directory, and I guess it installed something compatible with
> the config of the local machine over a version that was compatible
> with the architecture of my physical desktop. Or at least I'm
> guessing this is what the problem was). Is there a way to redo the
> update using the machine with the original config? Or roll back the
> version without screwing anything else up?
>
> Desperately seeking a solution :(
>
> cheers,
>
> Rakhi
>
> To manage notifications about this bug go to:
> https:/
>
> --
> You received this bug notification because you are subscribed to the bug
> report.
> https:/
>
> Title:
> auto-update problem
>
> Status in MadGraph5_aMC@NLO Generator:
> New
>
> Bug description:
> Dear mg/me team,
>
> I stupidly okayed the installation of the updated version of MG/ME
> over a working version, but with the wrong configuration, and my
> madevent is now broken! (how, you ask? I logged in to a random
> machine on lxplus, rather than directly to my desktop, and updated in
> my home directory, and I guess it installed something compatible with
> the config of the local machine over a version that was compatible
> with the architecture of my physical desktop. Or at least I'm
> guessing this is what the problem was). Is there a way to redo the
> update using the machine with the original config? Or roll back the
> version withou...
Rakhi Mahbubani (r-mahbubani) wrote : | #6 |
Yes, the function is in both files.
R
=======
Chemin de l'Esplanade 26
1214 Vernier
Suisse
Tel: (+41) 22 341 29 60
Mob: (+41) 78 320 41 46
=======
=======
"One does not discover new lands without consenting to lose
sight of the shore for a very long time." - Andre Gide
_______
From: Olivier Mattelaer <email address hidden>
To: <email address hidden>
Sent: Monday, January 6, 2014 2:08 PM
Subject: Re: [Bug 1261931] Re: auto-update problem
So do you have now the boostm line/function in those files?
Cheers,
Olivier
On Jan 6, 2014, at 1:48 PM, Rakhi Mahbubani <email address hidden>
wrote:
> Hi Olivier,
>
> No I don't recall making any changes to those files.
>
> Cheers,
>
> Rakhi
>
>
>
> =======
> Chemin de l'Esplanade 26
> 1214 Vernier
> Suisse
>
> Tel: (+41) 22 341 29 60
> Mob: (+41) 78 320 41 46
> =======
> =======
>
> "One does not discover new lands without consenting to lose
> sight of the shore for a very long time." - Andre Gide
>
>
> _______
> From: Olivier Mattelaer <email address hidden>
> To: <email address hidden>
> Sent: Monday, January 6, 2014 10:24 AM
> Subject: [Bug 1261931] Re: auto-update problem
>
>
> Hi Rakhi,
>
> Looks like that the modification of one file didn't go through...
>
>
> Do you have the lines:
> subroutine boostm(p,q,m, pboost)
>
> In the following files:
> HELAS/boostx.F
> and
> aloha/template_
>
> Did you modify one of this files by hand at a point?
>
> Cheers,
>
> Olivier
>
> --
> You received this bug notification because you are subscribed to the bug
> report.
> https:/
>
> Title:
> auto-update problem
>
> Status in MadGraph5_aMC@NLO Generator:
> New
>
> Bug description:
> Dear mg/me team,
>
> I stupidly okayed the installation of the updated version of MG/ME
> over a working version, but with the wrong configuration, and my
> madevent is now broken! (how, you ask? I logged in to a random
> machine on lxplus, rather than directly to my desktop, and updated in
> my home directory, and I guess it installed something compatible with
> the config of the local machine over a version that was compatible
> with the architecture of my physical desktop. Or at least I'm
> guessing this is what the problem was). Is there a way to redo the
> update using the machine with the original config? Or roll back the
> version without screwing anything else up?
>
> Desperately seeking a solution :(
>
> cheers,
>
> Rakhi
>
> To manage notifications about this bug go to:
> https:/
>
> --
> You received this bug notification because you are subscribed to the bug
> report.
> https:/
>
> Title:
> auto-update problem
>
> Status in MadGraph5_aMC@NLO Generator:
> New
>
> Bug description:
> Dear mg/me team,
>
> I stupidly okayed the installation of the updated version of MG/ME
> over a working ve...
Olivier Mattelaer (olivier-mattelaer) wrote : Re: [Bug 1261931] auto-update problem | #7 |
Then the update works correctly…
So the problem is probably due to a wrong use of the Template.
I guess that you do manual cp of the Template directory? (the v4 way to generate directory, which is not supported anymore since v2.0)
and then use the ./bin/newproces
If so, I guess that the problem is that your copy of the Template was done before the update. Is this possible?
I would advice to do the following:
cp PROCESSNAME/
emacs proc_card_mg5.dat
#-> replace the line output by output PROCESSNAME
./bin/mg5 proc_card_mg5.dat
Cheers,
Olivier
On Jan 6, 2014, at 3:15 PM, Rakhi Mahbubani <email address hidden> wrote:
> Yes, the function is in both files.
>
> R
>
>
>
> =======
> Chemin de l'Esplanade 26
> 1214 Vernier
> Suisse
>
> Tel: (+41) 22 341 29 60
> Mob: (+41) 78 320 41 46
> =======
> =======
>
> "One does not discover new lands without consenting to lose
> sight of the shore for a very long time." - Andre Gide
>
>
> _______
> From: Olivier Mattelaer <email address hidden>
> To: <email address hidden>
> Sent: Monday, January 6, 2014 2:08 PM
> Subject: Re: [Bug 1261931] Re: auto-update problem
>
>
> So do you have now the boostm line/function in those files?
>
> Cheers,
>
> Olivier
>
> On Jan 6, 2014, at 1:48 PM, Rakhi Mahbubani <email address hidden>
> wrote:
>
>> Hi Olivier,
>>
>> No I don't recall making any changes to those files.
>>
>> Cheers,
>>
>> Rakhi
>>
>>
>>
>> =======
>> Chemin de l'Esplanade 26
>> 1214 Vernier
>> Suisse
>>
>> Tel: (+41) 22 341 29 60
>> Mob: (+41) 78 320 41 46
>> =======
>> =======
>>
>> "One does not discover new lands without consenting to lose
>> sight of the shore for a very long time." - Andre Gide
>>
>>
>> _______
>> From: Olivier Mattelaer <email address hidden>
>> To: <email address hidden>
>> Sent: Monday, January 6, 2014 10:24 AM
>> Subject: [Bug 1261931] Re: auto-update problem
>>
>>
>> Hi Rakhi,
>>
>> Looks like that the modification of one file didn't go through...
>>
>>
>> Do you have the lines:
>> subroutine boostm(p,q,m, pboost)
>>
>> In the following files:
>> HELAS/boostx.F
>> and
>> aloha/template_
>>
>> Did you modify one of this files by hand at a point?
>>
>> Cheers,
>>
>> Olivier
>>
>> --
>> You received this bug notification because you are subscribed to the bug
>> report.
>> https:/
>>
>> Title:
>> auto-update problem
>>
>> Status in MadGraph5_aMC@NLO Generator:
>> New
>>
>> Bug description:
>> Dear mg/me team,
>>
>> I stupidly okayed the installation of the updated version of MG/ME
>> over a working version, but with the wrong configuration, and my
>> madevent is now broken! (how, you ask? I logged in to a random
>> machine on lxplus, rather than directly to my desktop, and updated in
>> my home directory, and I guess it installed something compatible with
>> the config of the local machine over a version th...
Rakhi Mahbubani (r-mahbubani) wrote : | #8 |
Dear Olivier,
No, I don't do a manual cp of the Template directory, but generate the process (using an existing model directory) using the python interface of madgraph. I think I have also had this problem before when trying to use a model folder created with an older version of madgraph, to generate a process in a newer version...is there some issue with backwards-
Cheers,
Rakhi
=======
Chemin de l'Esplanade 26
1214 Vernier
Suisse
Tel: (+41) 22 341 29 60
Mob: (+41) 78 320 41 46
=======
=======
"One does not discover new lands without consenting to lose
sight of the shore for a very long time." - Andre Gide
_______
From: Olivier Mattelaer <email address hidden>
To: <email address hidden>
Sent: Monday, January 6, 2014 3:42 PM
Subject: Re: [Bug 1261931] auto-update problem
Then the update works correctly…
So the problem is probably due to a wrong use of the Template.
I guess that you do manual cp of the Template directory? (the v4 way to generate directory, which is not supported anymore since v2.0)
and then use the ./bin/newproces
If so, I guess that the problem is that your copy of the Template was done before the update. Is this possible?
I would advice to do the following:
cp PROCESSNAME/
emacs proc_card_mg5.dat
#-> replace the line output by output PROCESSNAME
./bin/mg5 proc_card_mg5.dat
Cheers,
Olivier
On Jan 6, 2014, at 3:15 PM, Rakhi Mahbubani <email address hidden>
wrote:
> Yes, the function is in both files.
>
> R
>
>
>
> =======
> Chemin de l'Esplanade 26
> 1214 Vernier
> Suisse
>
> Tel: (+41) 22 341 29 60
> Mob: (+41) 78 320 41 46
> =======
> =======
>
> "One does not discover new lands without consenting to lose
> sight of the shore for a very long time." - Andre Gide
>
>
> _______
> From: Olivier Mattelaer <email address hidden>
> To: <email address hidden>
> Sent: Monday, January 6, 2014 2:08 PM
> Subject: Re: [Bug 1261931] Re: auto-update problem
>
>
> So do you have now the boostm line/function in those files?
>
> Cheers,
>
> Olivier
>
> On Jan 6, 2014, at 1:48 PM, Rakhi Mahbubani <email address hidden>
> wrote:
>
>> Hi Olivier,
>>
>> No I don't recall making any changes to those files.
>>
>> Cheers,
>>
>> Rakhi
>>
>>
>>
>> =======
>> Chemin de l'Esplanade 26
>> 1214 Vernier
>> Suisse
>>
>> Tel: (+41) 22 341 29 60
>> Mob: (+41) 78 320 41 46
>> =======
>> =======
>>
>> "One does not discover new lands without consenting to lose
>> sight of the shore for a very long time." - Andre Gide
>>
>>
>> _______
>> From: Olivier Mattelaer <email address hidden>
>> To: <email address hidden>
>> Sent: Monday, January 6, 2014 10:24 AM
>> Subject: [Bug 1261931] Re: auto-update problem
>>
>>
>> Hi Rakhi,
>>
>> Looks like that the modification of one file didn't go through...
>>
>>
>> Do you have the line...
Olivier Mattelaer (olivier-mattelaer) wrote : | #9 |
Hi Rakhi,
I'm confuse about this statement:
> I think I have also had this problem before when trying to
> use a model folder created with an older version of madgraph, to
> generate a process in a newer version…
MadGraph didn't create model… So what do you mean by that?
> is there some issue with
> backwards-
Not that I know.
The bug that you mention, is doesn't seems to be related to that.
In this case, we have add one function the boostm and looks like this one is not found.
For v4 model this function is in the HELAS/boostx.F file which is automatically copy to
Source/DHELAS
I might have one "idea", do you have some .o file in HELAS directory?
If yes, please remove those, this might be the reason of the crash.
Cheers,
Olivier
On Jan 8, 2014, at 10:57 AM, Rakhi Mahbubani <email address hidden> wrote:
> Dear Olivier,
>
> No, I don't do a manual cp of the Template directory, but generate the
> process (using an existing model directory) using the python interface
> of madgraph. I think I have also had this problem before when trying to
> use a model folder created with an older version of madgraph, to
> generate a process in a newer version...is there some issue with
> backwards-
>
> Cheers,
>
> Rakhi
>
>
>
> =======
> Chemin de l'Esplanade 26
> 1214 Vernier
> Suisse
>
> Tel: (+41) 22 341 29 60
> Mob: (+41) 78 320 41 46
> =======
> =======
>
> "One does not discover new lands without consenting to lose
> sight of the shore for a very long time." - Andre Gide
>
>
> _______
> From: Olivier Mattelaer <email address hidden>
> To: <email address hidden>
> Sent: Monday, January 6, 2014 3:42 PM
> Subject: Re: [Bug 1261931] auto-update problem
>
>
> Then the update works correctly…
>
> So the problem is probably due to a wrong use of the Template.
> I guess that you do manual cp of the Template directory? (the v4 way to generate directory, which is not supported anymore since v2.0)
> and then use the ./bin/newproces
> If so, I guess that the problem is that your copy of the Template was done before the update. Is this possible?
>
> I would advice to do the following:
>
> cp PROCESSNAME/
> emacs proc_card_mg5.dat
> #-> replace the line output by output PROCESSNAME
> ./bin/mg5 proc_card_mg5.dat
>
> Cheers,
>
> Olivier
>
> On Jan 6, 2014, at 3:15 PM, Rakhi Mahbubani <email address hidden>
> wrote:
>
>> Yes, the function is in both files.
>>
>> R
>>
>>
>>
>> =======
>> Chemin de l'Esplanade 26
>> 1214 Vernier
>> Suisse
>>
>> Tel: (+41) 22 341 29 60
>> Mob: (+41) 78 320 41 46
>> =======
>> =======
>>
>> "One does not discover new lands without consenting to lose
>> sight of the shore for a very long time." - Andre Gide
>>
>>
>> _______
>> From: Olivier Mattelaer <email address hidden>
>> To: <email address hidden>
>> Sent: Monday, January 6, 2014 2:08 PM
>> Subject: Re: [Bug 1261931] Re: a...
Rakhi Mahbubani (r-mahbubani) wrote : | #10 |
Fantastic! I got rid of the .o files in the HELAS directory and everything now works!! I'm v happy :)
Thanks so much for your help Olivier!
R
=======
Chemin de l'Esplanade 26
1214 Vernier
Suisse
Tel: (+41) 22 341 29 60
Mob: (+41) 78 320 41 46
=======
=======
"One does not discover new lands without consenting to lose
sight of the shore for a very long time." - Andre Gide
_______
From: Olivier Mattelaer <email address hidden>
To: <email address hidden>
Sent: Wednesday, January 8, 2014 1:41 PM
Subject: Re: [Bug 1261931] auto-update problem
Hi Rakhi,
I'm confuse about this statement:
> I think I have also had this problem before when trying to
> use a model folder created with an older version of madgraph, to
> generate a process in a newer version…
MadGraph didn't create model… So what do you mean by that?
> is there some issue with
> backwards-
Not that I know.
The bug that you mention, is doesn't seems to be related to that.
In this case, we have add one function the boostm and looks like this one is not found.
For v4 model this function is in the HELAS/boostx.F file which is automatically copy to
Source/DHELAS
I might have one "idea", do you have some .o file in HELAS directory?
If yes, please remove those, this might be the reason of the crash.
Cheers,
Olivier
On Jan 8, 2014, at 10:57 AM, Rakhi Mahbubani <email address hidden> wrote:
> Dear Olivier,
>
> No, I don't do a manual cp of the Template directory, but generate the
> process (using an existing model directory) using the python interface
> of madgraph. I think I have also had this problem before when trying to
> use a model folder created with an older version of madgraph, to
> generate a process in a newer version...is there some issue with
> backwards-
>
> Cheers,
>
> Rakhi
>
>
>
> =======
> Chemin de l'Esplanade 26
> 1214 Vernier
> Suisse
>
> Tel: (+41) 22 341 29 60
> Mob: (+41) 78 320 41 46
> =======
> =======
>
> "One does not discover new lands without consenting to lose
> sight of the shore for a very long time." - Andre Gide
>
>
> _______
> From: Olivier Mattelaer <email address hidden>
> To: <email address hidden>
> Sent: Monday, January 6, 2014 3:42 PM
> Subject: Re: [Bug 1261931] auto-update problem
>
>
> Then the update works correctly…
>
> So the problem is probably due to a wrong use of the Template.
> I guess that you do manual cp of the Template directory? (the v4 way to generate directory, which is not supported anymore since v2.0)
> and then use the ./bin/newproces
> If so, I guess that the problem is that your copy of the Template was done before the update. Is this possible?
>
> I would advice to do the following:
>
> cp PROCESSNAME/
> emacs proc_card_mg5.dat
> #-> replace the line output by output PROCESSNAME
> ./bin/mg5 proc_card_mg5.dat
>
> Cheers,
>
> Olivier
>
> On Jan 6, 2014, at 3:15 PM, ...
Changed in madgraph5: | |
status: | New → Fix Released |
Hi rakhi,
I convert your question to a bug, and now you can attach a file directly from the launchpad website
Cheers,
Olivier