MATSHITADVD-RAM UJ-850S reports a music CD in empty CD drive
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux-source-2.6.20 (Ubuntu) |
Won't Fix
|
Medium
|
Unassigned | ||
linux-source-2.6.22 (Ubuntu) |
Won't Fix
|
Medium
|
Unassigned |
Bug Description
1. System reports a music CD in empty CD drive.
2. After "this" report is CD drive no more (before system restart) usable.
ProblemType: Bug
Architecture: i386
Date: Mon May 7 19:57:12 2007
DistroRelease: Ubuntu 7.04
ExecutablePath: /usr/bin/
Package: gnome-panel 1:2.18.1-0ubuntu3
PackageArchitec
ProcCmdline: gnome-panel --sm-client-id default1
ProcCwd: /home/martin
ProcEnviron:
PATH=/
LANG=cs_CZ.UTF-8
SHELL=/bin/bash
SourcePackage: gnome-panel
Uname: Linux martin-laptop 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686 GNU/Linux
Detail describtion (logs):
'uname -a'
Linux martin-laptop 2.6.20-16-generic #2 SMP Thu Jun 7 20:19:32 UTC 2007 i686 GNU/Linux
'dmesg.log'
[13402.320000] hdc: drive not ready for command
[13402.320000] hdc: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
[13402.320000] hdc: status error: error=0x40 { LastFailedSense
[13402.320000] ide: failed opcode was: unknown
'lspci-vvnn.log'
00:00.0 Host bridge [0600]: ATI Technologies Inc Unknown device [1002:5a31] (rev 01)
Subsystem: ATI Technologies Inc Unknown device [1002:5a31]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 3: Memory at <ignored> (64-bit, non-prefetchable)
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fe100000-fe1fffff
Prefetchable memory behind bridge: bdf00000-ddefffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [b0] Subsystem: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f]
00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4374] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1187]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4375] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1187]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2 Host Controller [1002:4373] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1187]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller [1002:4372] (rev 11)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1187]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: I/O ports at 0b00 [size=16]
Region 1: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
00:14.1 IDE interface [0101]: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI [1002:4376] (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1187]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: [70] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA Bridge [1002:4377]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP SB400 PCI-PCI Bridge [1002:4371] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=02, subordinate=06, sec-latency=64
I/O behind bridge: 0000a000-0000bfff
Memory behind bridge: fe200000-feafffff
Prefetchable memory behind bridge: ddf00000-dfefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:14.5 Multimedia audio controller [0401]: ATI Technologies Inc IXP SB400 AC'97 Audio Controller [1002:4370] (rev 02)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1183]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at febfcc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
00:14.6 Modem [0703]: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller [1002:4378] (rev 02) (prog-if 00 [Generic])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1186]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at febfc800 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RC410 [Radeon Xpress 200M] [1002:5a62] (prog-if 00 [VGA])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1182]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 255 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 9800 [size=256]
Region 2: Memory at fe1f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fe1c0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1045]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at fe201000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1187]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fe200000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 24000000-27fff000 (prefetchable)
Memory window 1: 28000000-2bfff000
I/O window 0: 0000a400-0000a4ff
I/O window 1: 0000a800-0000a8ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
02:01.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1187]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin C routed to IRQ 4
Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
02:01.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 08)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1187]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 4
Region 0: Memory at feaff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
02:03.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
Subsystem: ASUSTeK Computer Inc. A6U notebook embedded card [1043:120f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 5
Region 0: Memory at feafc000 (32-bit, non-prefetchable) [size=8K]
description: | updated |
Changed in linux-source-2.6.20: | |
assignee: | brian-murray → ubuntu-kernel-team |
importance: | Undecided → Medium |
status: | Incomplete → Triaged |
Thanks for taking the time to report this bug and helping to make Ubuntu better. Unfortunately we can't fix it, because your description doesn't yet have enough information. /wiki.ubuntu. com/KernelTeamB ugPolicies . Thanks in advance!
Please include as attachments the following additional information, if you have not already done so (please pay attention to lspci's additional options), as required by the Ubuntu Kernel Team:
1. Please include the output of the command 'uname -a' in your next response. It should be one, long line of text which includes the exact kernel version you're running, as well as the CPU architecture.
2. After seeing the error please run the command 'dmesg > dmesg.log' and attach the resulting file 'dmesg.log' to this bug report.
3. Please run the command 'sudo lspci -vvnn > lspci-vvnn.log' and attach the resulting file 'lspci-vvnn.log' to this bug report.
For your reference, the full description of procedures for kernel-related bug reports is available at https:/