Bug #1126329 “045e:0745 Bluetooth can not be recognized” : Bugs : linux package : Ubuntu

Revision history for this message

Armando Santana (oekslieru-l) wrote on 2013-02-15:

#1

AlsaInfo.txt Edit (24.3 KiB, text/plain; charset="utf-8")
BootDmesg.txt Edit (87.6 KiB, text/plain; charset="utf-8")
CRDA.txt Edit (257 bytes, text/plain; charset="utf-8")
CurrentDmesg.txt Edit (7.8 KiB, text/plain; charset="utf-8")
Dependencies.txt Edit (2.9 KiB, text/plain; charset="utf-8")
IwConfig.txt Edit (617 bytes, text/plain; charset="utf-8")
Lspci.txt Edit (30.2 KiB, text/plain; charset="utf-8")
Lsusb.txt Edit (788 bytes, text/plain; charset="utf-8")
ProcCpuinfo.txt Edit (1.5 KiB, text/plain; charset="utf-8")
ProcEnviron.txt Edit (152 bytes, text/plain; charset="utf-8")
ProcInterrupts.txt Edit (2.1 KiB, text/plain; charset="utf-8")
ProcModules.txt Edit (5.0 KiB, text/plain; charset="utf-8")
UdevDb.txt Edit (166.0 KiB, text/plain; charset="utf-8")
UdevLog.txt Edit (374.1 KiB, text/plain; charset="utf-8")
WifiSyslog.txt Edit (833.1 KiB, text/plain; charset="utf-8")

Revision history for this message

Armando Santana (oekslieru-l) wrote on 2013-02-15:

#2

lspci-vnvn.log is a sudo lspci -vnvn command output.

Revision history for this message

Brad Figg (brad-figg) wrote on 2013-02-15: Status changed to Confirmed

#3

This change was made by a bot.

Changed in linux (Ubuntu):
status:	New → Confirmed

Revision history for this message

Joseph Salisbury (jsalisbury) wrote on 2013-02-15: Re: Bluetooth can not recongnized

#4

Would it be possible for you to test the latest upstream kernel? Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest v3.8 kernel[0] (Not a kernel in the daily directory) and install both the linux-image and linux-image-extra .deb packages.

If this bug is fixed in the mainline kernel, please add the following tag 'kernel-fixed-upstream'.

If the mainline kernel does not fix this bug, please add the tag: 'kernel-bug-exists-upstream'.

If you are unable to test the mainline kernel, for example it will not boot, please add the tag: 'kernel-unable-to-test-upstream'.
Once testing of the upstream kernel is complete, please mark this bug as "Confirmed".

Thanks in advance.

[0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.8-rc7-raring/

Changed in linux (Ubuntu):
importance:	Undecided → Medium
status:	Confirmed → Incomplete

Revision history for this message

Armando Santana (oekslieru-l) wrote on 2013-02-15:

#5

kernel-bug-exists-upstream

Kernel panic - not syncing: No limit found.

Changed in linux (Ubuntu):
status:	Incomplete → Confirmed

Revision history for this message

Armando Santana (oekslieru-l) wrote on 2013-02-16: Re: [Bug 1126329] Re: Bluetooth can not recongnized

#6

Download full text (41.9 KiB)

Hi Joseph,

The latest upstream kernel was tested. The ticket was updated and the
status was changed to "Confirmed" . The test with the kernel
(v3.8-rc7-raring) was unsuccessfull, I had kernel panic message after boot.
I performed rool back to 3.5.0-24-generic.
The tag 'kernel-bug-exists-upstream' was added to ticket Bug 1126329 .

Thanks,

--
**********************************************************************************
**********************************************************************************
Armando Santana
<email address hidden>
21-8101-4488
21-82841834
**********************************************************************************
**********************************************************************************

2013/2/15 Joseph Salisbury <email address hidden>

> Would it be possible for you to test the latest upstream kernel? Refer
> to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest
> v3.8 kernel[0] (Not a kernel in the daily directory) and install both
> the linux-image and linux-image-extra .deb packages.
>
> If this bug is fixed in the mainline kernel, please add the following
> tag 'kernel-fixed-upstream'.
>
> If the mainline kernel does not fix this bug, please add the tag:
> 'kernel-bug-exists-upstream'.
>
> If you are unable to test the mainline kernel, for example it will not
> boot, please add the tag: 'kernel-unable-to-test-upstream'.
> Once testing of the upstream kernel is complete, please mark this bug as
> "Confirmed".
>
>
> Thanks in advance.
>
> [0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.8-rc7-raring/
>
> ** Changed in: linux (Ubuntu)
> Importance: Undecided => Medium
>
> ** Changed in: linux (Ubuntu)
> Status: Confirmed => Incomplete
>
> --
> You received this bug notification because you are subscribed to the bug
> report.
> https://bugs.launchpad.net/bugs/1126329
>
> Title:
> Bluetooth can not recongnized
>
> Status in “linux” package in Ubuntu:
> Incomplete
>
> Bug description:
> cat /proc/version_signature output:
>
> Ubuntu 3.5.0-24.37-generic 3.5.7.4
>
>
> sudo lspci -vnvn output:
>
>
> 00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset
> Memory Controller Hub [8086:2a40] (rev 07)
> Subsystem: Lenovo Device [17aa:20e0]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: [e0] Vendor Specific Information: Len=0a <?>
> Kernel driver in use: agpgart-intel
>
> 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4
> Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if
> 00 [VGA controller])
> Subsystem: Lenovo Device [17aa:20e4]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 47
> Region 0: ...

Hi Joseph,

The latest upstream kernel was tested. The ticket was updated and the
status was changed to "Confirmed" . The test with the kernel
(v3.8-rc7-raring) was unsuccessfull, I had kernel panic message after boot.
I performed rool back to 3.5.0-24-generic.
The tag 'kernel-bug-exists-upstream' was added to ticket Bug 1126329 .

Thanks,

-- 
**********************************************************************************
**********************************************************************************
Armando Santana
armando7santana@gmail.com
21-8101-4488
21-82841834
**********************************************************************************
**********************************************************************************

2013/2/15 Joseph Salisbury <joseph.salisbury@canonical.com>

> Would it be possible for you to test the latest upstream kernel?  Refer
> to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest
> v3.8 kernel[0] (Not a kernel in the daily directory) and install both
> the linux-image and linux-image-extra .deb packages.
>
> If this bug is fixed in the mainline kernel, please add the following
> tag 'kernel-fixed-upstream'.
>
> If the mainline kernel does not fix this bug, please add the tag:
> 'kernel-bug-exists-upstream'.
>
> If you are unable to test the mainline kernel, for example it will not
> boot, please add the tag: 'kernel-unable-to-test-upstream'.
> Once testing of the upstream kernel is complete, please mark this bug as
> "Confirmed".
>
>
> Thanks in advance.
>
> [0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.8-rc7-raring/
>
> ** Changed in: linux (Ubuntu)
>    Importance: Undecided => Medium
>
> ** Changed in: linux (Ubuntu)
>        Status: Confirmed => Incomplete
>
> --
> You received this bug notification because you are subscribed to the bug
> report.
> https://bugs.launchpad.net/bugs/1126329
>
> Title:
>   Bluetooth can not recongnized
>
> Status in “linux” package in Ubuntu:
>   Incomplete
>
> Bug description:
>   cat /proc/version_signature output:
>
>   Ubuntu 3.5.0-24.37-generic 3.5.7.4
>
>
>    sudo lspci -vnvn output:
>
>
>   00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset
> Memory Controller Hub [8086:2a40] (rev 07)
>         Subsystem: Lenovo Device [17aa:20e0]
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR- INTx-
>         Latency: 0
>         Capabilities: [e0] Vendor Specific Information: Len=0a <?>
>         Kernel driver in use: agpgart-intel
>
>   00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4
> Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if
> 00 [VGA controller])
>         Subsystem: Lenovo Device [17aa:20e4]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Interrupt: pin A routed to IRQ 47
>         Region 0: Memory at f4400000 (64-bit, non-prefetchable) [size=4M]
>         Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
>         Region 4: I/O ports at 1800 [size=8]
>         Expansion ROM at <unassigned> [disabled]
>         Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
>                 Address: fee0300c  Data: 41b1
>         Capabilities: [d0] Power Management version 3
>                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Kernel driver in use: i915
>         Kernel modules: i915
>
>   00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series
> Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
>         Subsystem: Lenovo Device [17aa:20e4]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Region 0: Memory at f4200000 (64-bit, non-prefetchable) [size=1M]
>         Capabilities: [d0] Power Management version 3
>                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>
>   00:03.0 Communication controller [0780]: Intel Corporation Mobile 4
> Series Chipset MEI Controller [8086:2a44] (rev 07)
>         Subsystem: Lenovo Device [17aa:20e6]
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Interrupt: pin A routed to IRQ 45
>         Region 0: Memory at fc226000 (64-bit, non-prefetchable) [size=16]
>         Capabilities: [50] Power Management version 3
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
>                 Address: 00000000fee0300c  Data: 41a1
>         Kernel driver in use: mei
>         Kernel modules: mei
>
>   00:03.3 Serial controller [0700]: Intel Corporation Mobile 4 Series
> Chipset AMT SOL Redirection [8086:2a47] (rev 07) (prog-if 02 [16550])
>         Subsystem: Lenovo Device [17aa:20ec]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Interrupt: pin B routed to IRQ 17
>         Region 0: I/O ports at 1830 [size=8]
>         Region 1: Memory at fc024000 (32-bit, non-prefetchable) [size=4K]
>         Capabilities: [c8] Power Management version 3
>                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
>                 Address: 0000000000000000  Data: 0000
>         Kernel driver in use: serial
>
>   00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit
> Network Connection [8086:10f5] (rev 03)
>         Subsystem: Lenovo Device [17aa:20ee]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Interrupt: pin A routed to IRQ 44
>         Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=128K]
>         Region 1: Memory at fc025000 (32-bit, non-prefetchable) [size=4K]
>         Region 2: I/O ports at 1840 [size=32]
>         Capabilities: [c8] Power Management version 2
>                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
>         Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>                 Address: 00000000fee0200c  Data: 41c9
>         Capabilities: [e0] PCI Advanced Features
>                 AFCap: TP+ FLR+
>                 AFCtrl: FLR-
>                 AFStatus: TP-
>         Kernel driver in use: e1000e
>         Kernel modules: e1000e
>
>   00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family)
> USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
>         Subsystem: Lenovo Device [17aa:20f0]
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Interrupt: pin A routed to IRQ 20
>         Region 4: I/O ports at 1860 [size=32]
>         Capabilities: [50] PCI Advanced Features
>                 AFCap: TP+ FLR+
>                 AFCtrl: FLR-
>                 AFStatus: TP-
>         Kernel driver in use: uhci_hcd
>
>   00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family)
> USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
>         Subsystem: Lenovo Device [17aa:20f0]
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Interrupt: pin B routed to IRQ 21
>         Region 4: I/O ports at 1880 [size=32]
>         Capabilities: [50] PCI Advanced Features
>                 AFCap: TP+ FLR+
>                 AFCtrl: FLR-
>                 AFStatus: TP-
>         Kernel driver in use: uhci_hcd
>
>   00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family)
> USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
>         Subsystem: Lenovo Device [17aa:20f0]
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Interrupt: pin C routed to IRQ 22
>         Region 4: I/O ports at 18a0 [size=32]
>         Capabilities: [50] PCI Advanced Features
>                 AFCap: TP+ FLR+
>                 AFCtrl: FLR-
>                 AFStatus: TP-
>         Kernel driver in use: uhci_hcd
>
>   00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family)
> USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
>         Subsystem: Lenovo Device [17aa:20f1]
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Interrupt: pin D routed to IRQ 23
>         Region 0: Memory at fc226400 (32-bit, non-prefetchable) [size=1K]
>         Capabilities: [50] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [58] Debug port: BAR=1 offset=00a0
>         Capabilities: [98] PCI Advanced Features
>                 AFCap: TP+ FLR+
>                 AFCtrl: FLR-
>                 AFStatus: TP-
>         Kernel driver in use: ehci_hcd
>
>   00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD
> Audio Controller [8086:293e] (rev 03)
>         Subsystem: Lenovo Device [17aa:20f2]
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Interrupt: pin B routed to IRQ 48
>         Region 0: Memory at fc020000 (64-bit, non-prefetchable) [size=16K]
>         Capabilities: [50] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
>                 Address: 00000000fee0300c  Data: 41b9
>         Capabilities: [70] Express (v1) Root Complex Integrated Endpoint,
> MSI 00
>                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
>                         ExtTag- RBE- FLReset+
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>                         MaxPayload 128 bytes, MaxReadReq 128 bytes
>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
> TransPend-
>                 LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown,
> Latency L0 <64ns, L1 <1us
>                         ClockPM- Surprise- LLActRep- BwNot-
>                 LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk-
> DLActive- BWMgmt- ABWMgmt-
>         Capabilities: [100 v1] Virtual Channel
>                 Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
>                 Arb:    Fixed- WRR32- WRR64- WRR128-
>                 Ctrl:   ArbSelect=Fixed
>                 Status: InProgress-
>                 VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>                         Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128-
> WRR256-
>                         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>                         Status: NegoPending- InProgress-
>                 VC1:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>                         Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128-
> WRR256-
>                         Ctrl:   Enable- ID=0 ArbSelect=Fixed TC/VC=00
>                         Status: NegoPending- InProgress-
>         Capabilities: [130 v1] Root Complex Link
>                 Desc:   PortNumber=0f ComponentID=02 EltType=Config
>                 Link0:  Desc:   TargetPort=00 TargetComponent=02
> AssocRCRB- LinkType=MemMapped LinkValid+
>                         Addr:   00000000fed1c000
>         Kernel driver in use: snd_hda_intel
>         Kernel modules: snd-hda-intel
>
>   00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
> Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>         I/O behind bridge: 00008000-00008fff
>         Memory behind bridge: c0000000-c01fffff
>         Prefetchable memory behind bridge:
> 00000000c0200000-00000000c03fffff
>         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
>         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>         Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
>                         ExtTag- RBE+ FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                         MaxPayload 128 bytes, MaxReadReq 128 bytes
>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
> TransPend-
>                 LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <1us, L1 <4us
>                         ClockPM- Surprise- LLActRep+ BwNot-
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk-
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
>                 SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
> Surprise+
>                         Slot #0, PowerLimit 6.500W; Interlock- NoCompl-
>                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+
> HPIrq+ LinkChg-
>                         Control: AttnInd Unknown, PwrInd Unknown, Power-
> Interlock-
>                 SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
> Interlock-
>                         Changed: MRL- PresDet- LinkState-
>                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna+ CRSVisible-
>                 RootCap: CRSVisible-
>                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>         Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>                 Address: fee0300c  Data: 4179
>         Capabilities: [90] Subsystem: Lenovo Device [17aa:20f3]
>         Capabilities: [a0] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [100 v1] Virtual Channel
>                 Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
>                 Arb:    Fixed+ WRR32- WRR64- WRR128-
>                 Ctrl:   ArbSelect=Fixed
>                 Status: InProgress-
>                 VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>                         Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128-
> WRR256-
>                         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>                         Status: NegoPending- InProgress-
>         Capabilities: [180 v1] Root Complex Link
>                 Desc:   PortNumber=01 ComponentID=02 EltType=Config
>                 Link0:  Desc:   TargetPort=00 TargetComponent=02
> AssocRCRB- LinkType=MemMapped LinkValid+
>                         Addr:   00000000fed1c000
>         Kernel driver in use: pcieport
>         Kernel modules: shpchp
>
>   00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
> Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>         I/O behind bridge: 00009000-00009fff
>         Memory behind bridge: f4300000-f43fffff
>         Prefetchable memory behind bridge:
> 00000000c0400000-00000000c05fffff
>         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
>         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>         Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
>                         ExtTag- RBE+ FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                         MaxPayload 128 bytes, MaxReadReq 128 bytes
>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
> TransPend-
>                 LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <256ns, L1 <4us
>                         ClockPM- Surprise- LLActRep+ BwNot-
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive+ BWMgmt- ABWMgmt-
>                 SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
> Surprise+
>                         Slot #1, PowerLimit 6.500W; Interlock- NoCompl-
>                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+
> HPIrq+ LinkChg-
>                         Control: AttnInd Unknown, PwrInd Unknown, Power-
> Interlock-
>                 SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
> Interlock-
>                         Changed: MRL- PresDet- LinkState+
>                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna+ CRSVisible-
>                 RootCap: CRSVisible-
>                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>         Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>                 Address: fee0300c  Data: 4181
>         Capabilities: [90] Subsystem: Lenovo Device [17aa:20f3]
>         Capabilities: [a0] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [100 v1] Virtual Channel
>                 Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
>                 Arb:    Fixed+ WRR32- WRR64- WRR128-
>                 Ctrl:   ArbSelect=Fixed
>                 Status: InProgress-
>                 VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>                         Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128-
> WRR256-
>                         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>                         Status: NegoPending- InProgress-
>         Capabilities: [180 v1] Root Complex Link
>                 Desc:   PortNumber=02 ComponentID=02 EltType=Config
>                 Link0:  Desc:   TargetPort=00 TargetComponent=02
> AssocRCRB- LinkType=MemMapped LinkValid+
>                         Addr:   00000000fed1c000
>         Kernel driver in use: pcieport
>         Kernel modules: shpchp
>
>   00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
> Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
>         I/O behind bridge: 00002000-00002fff
>         Memory behind bridge: f8000000-f9ffffff
>         Prefetchable memory behind bridge:
> 00000000f4000000-00000000f40fffff
>         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
>         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>         Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
>                         ExtTag- RBE+ FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                         MaxPayload 128 bytes, MaxReadReq 128 bytes
>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
> TransPend-
>                 LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <1us, L1 <4us
>                         ClockPM- Surprise- LLActRep+ BwNot-
>                 LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled-
> Retrain- CommClk-
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
>                 SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
> Surprise+
>                         Slot #3, PowerLimit 6.500W; Interlock- NoCompl-
>                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+
> HPIrq+ LinkChg-
>                         Control: AttnInd Unknown, PwrInd Unknown, Power-
> Interlock-
>                 SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
> Interlock-
>                         Changed: MRL- PresDet- LinkState-
>                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna+ CRSVisible-
>                 RootCap: CRSVisible-
>                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>         Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>                 Address: fee0300c  Data: 4189
>         Capabilities: [90] Subsystem: Lenovo Device [17aa:20f3]
>         Capabilities: [a0] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [100 v1] Virtual Channel
>                 Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
>                 Arb:    Fixed+ WRR32- WRR64- WRR128-
>                 Ctrl:   ArbSelect=Fixed
>                 Status: InProgress-
>                 VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>                         Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128-
> WRR256-
>                         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>                         Status: NegoPending- InProgress-
>         Capabilities: [180 v1] Root Complex Link
>                 Desc:   PortNumber=04 ComponentID=02 EltType=Config
>                 Link0:  Desc:   TargetPort=00 TargetComponent=02
> AssocRCRB- LinkType=MemMapped LinkValid+
>                         Addr:   00000000fed1c000
>         Kernel driver in use: pcieport
>         Kernel modules: shpchp
>
>   00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
> Express Port 5 [8086:2948] (rev 03) (prog-if 00 [Normal decode])
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Bus: primary=00, secondary=0d, subordinate=14, sec-latency=0
>         I/O behind bridge: 00003000-00003fff
>         Memory behind bridge: fa000000-fbffffff
>         Prefetchable memory behind bridge:
> 00000000f4100000-00000000f41fffff
>         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
>         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>         Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
>                         ExtTag- RBE+ FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                         MaxPayload 128 bytes, MaxReadReq 128 bytes
>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
> TransPend-
>                 LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <1us, L1 <4us
>                         ClockPM- Surprise- LLActRep+ BwNot-
>                 LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled-
> Retrain- CommClk-
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
>                 SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
> Surprise+
>                         Slot #4, PowerLimit 6.500W; Interlock- NoCompl-
>                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+
> HPIrq+ LinkChg-
>                         Control: AttnInd Unknown, PwrInd Unknown, Power-
> Interlock-
>                 SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
> Interlock-
>                         Changed: MRL- PresDet- LinkState-
>                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna+ CRSVisible-
>                 RootCap: CRSVisible-
>                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>         Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>                 Address: fee0300c  Data: 4191
>         Capabilities: [90] Subsystem: Lenovo Device [17aa:20f3]
>         Capabilities: [a0] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [100 v1] Virtual Channel
>                 Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
>                 Arb:    Fixed+ WRR32- WRR64- WRR128-
>                 Ctrl:   ArbSelect=Fixed
>                 Status: InProgress-
>                 VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>                         Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128-
> WRR256-
>                         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>                         Status: NegoPending- InProgress-
>         Capabilities: [180 v1] Root Complex Link
>                 Desc:   PortNumber=05 ComponentID=02 EltType=Config
>                 Link0:  Desc:   TargetPort=00 TargetComponent=02
> AssocRCRB- LinkType=MemMapped LinkValid+
>                         Addr:   00000000fed1c000
>         Kernel driver in use: pcieport
>         Kernel modules: shpchp
>
>   00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family)
> USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
>         Subsystem: Lenovo Device [17aa:20f0]
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Interrupt: pin A routed to IRQ 16
>         Region 4: I/O ports at 18c0 [size=32]
>         Capabilities: [50] PCI Advanced Features
>                 AFCap: TP+ FLR+
>                 AFCtrl: FLR-
>                 AFStatus: TP-
>         Kernel driver in use: uhci_hcd
>
>   00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family)
> USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
>         Subsystem: Lenovo Device [17aa:20f0]
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Interrupt: pin B routed to IRQ 17
>         Region 4: I/O ports at 18e0 [size=32]
>         Capabilities: [50] PCI Advanced Features
>                 AFCap: TP+ FLR+
>                 AFCtrl: FLR-
>                 AFStatus: TP-
>         Kernel driver in use: uhci_hcd
>
>   00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family)
> USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
>         Subsystem: Lenovo Device [17aa:20f0]
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Interrupt: pin C routed to IRQ 18
>         Region 4: I/O ports at 1c00 [size=32]
>         Capabilities: [50] PCI Advanced Features
>                 AFCap: TP+ FLR+
>                 AFCtrl: FLR-
>                 AFStatus: TP-
>         Kernel driver in use: uhci_hcd
>
>   00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family)
> USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
>         Subsystem: Lenovo Device [17aa:20f1]
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Interrupt: pin D routed to IRQ 19
>         Region 0: Memory at fc226800 (32-bit, non-prefetchable) [size=1K]
>         Capabilities: [50] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [58] Debug port: BAR=1 offset=00a0
>         Capabilities: [98] PCI Advanced Features
>                 AFCap: TP+ FLR+
>                 AFCtrl: FLR-
>                 AFStatus: TP-
>         Kernel driver in use: ehci_hcd
>
>   00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
> [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Bus: primary=00, secondary=15, subordinate=18, sec-latency=32
>         I/O behind bridge: 00004000-00007fff
>         Memory behind bridge: f4800000-f7ffffff
>         Prefetchable memory behind bridge:
> 00000000f0000000-00000000f3ffffff
>         Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
>         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>         Capabilities: [50] Subsystem: Lenovo Device [17aa:20f4]
>
>   00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface
> Controller [8086:2917] (rev 03)
>         Subsystem: Lenovo Device [17aa:20f5]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Capabilities: [e0] Vendor Specific Information: Len=0c <?>
>         Kernel modules: lpc_ich
>
>   00:1f.2 IDE interface [0101]: Intel Corporation 82801IBM/IEM
> (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] [8086:2928] (rev 03)
> (prog-if 8a [Master SecP PriP])
>         Subsystem: Lenovo Device [17aa:20f7]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Interrupt: pin B routed to IRQ 16
>         Region 0: I/O ports at 01f0 [size=8]
>         Region 1: I/O ports at 03f4 [size=1]
>         Region 2: I/O ports at 0170 [size=8]
>         Region 3: I/O ports at 0374 [size=1]
>         Region 4: I/O ports at 1c30 [size=16]
>         Region 5: I/O ports at 1c20 [size=16]
>         Capabilities: [70] Power Management version 3
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [b0] PCI Advanced Features
>                 AFCap: TP+ FLR+
>                 AFCtrl: FLR-
>                 AFStatus: TP-
>         Kernel driver in use: ata_piix
>
>   00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus
> Controller [8086:2930] (rev 03)
>         Subsystem: Lenovo Device [17aa:20f9]
>         Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Interrupt: pin A routed to IRQ 11
>         Region 0: Memory at fc226c00 (64-bit, non-prefetchable) [size=256]
>         Region 4: I/O ports at 1c60 [size=32]
>         Kernel modules: i2c-i801
>
>   03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100
> AGN [Shiloh] Network Connection [8086:4237]
>         Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1211]
>         Physical Slot: 1
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Interrupt: pin A routed to IRQ 46
>         Region 0: Memory at f4300000 (64-bit, non-prefetchable) [size=8K]
>         Capabilities: [c8] Power Management version 3
>                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>                 Address: 00000000fee0100c  Data: 41a9
>         Capabilities: [e0] Express (v1) Endpoint, MSI 00
>                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <512ns, L1 unlimited
>                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
>                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> FLReset-
>                         MaxPayload 128 bytes, MaxReadReq 128 bytes
>                 DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+
> TransPend-
>                 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <128ns, L1 <32us
>                         ClockPM+ Surprise- LLActRep- BwNot-
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
>         Capabilities: [100 v1] Advanced Error Reporting
>                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
>                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
>                 AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap-
> ChkEn-
>         Capabilities: [140 v1] Device Serial Number 00-22-fa-ff-ff-5f-82-96
>         Kernel driver in use: iwlwifi
>         Kernel modules: iwlwifi
>
>   15:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev
> ba)
>         Subsystem: Lenovo Device [17aa:20c6]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 168, Cache Line Size: 64 bytes
>         Interrupt: pin A routed to IRQ 16
>         Region 0: Memory at f4800000 (32-bit, non-prefetchable) [size=4K]
>         Bus: primary=15, secondary=16, subordinate=17, sec-latency=176
>         Memory window 0: f0000000-f3ffffff (prefetchable)
>         Memory window 1: c4000000-c7ffffff
>         I/O window 0: 00004000-000040ff
>         I/O window 1: 00004400-000044ff
>         BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+
> PostWrite+
>         16-bit legacy interface ports at 0001
>         Kernel driver in use: yenta_cardbus
>         Kernel modules: yenta_socket
>
>   15:00.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394
> Controller [1180:0832] (rev 04) (prog-if 10 [OHCI])
>         Subsystem: Lenovo Device [17aa:20c7]
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
>         Interrupt: pin B routed to IRQ 17
>         Region 0: Memory at f4801000 (32-bit, non-prefetchable) [size=2K]
>         Capabilities: [dc] Power Management version 2
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME+
>         Kernel driver in use: firewire_ohci
>         Kernel modules: firewire-ohci
>
>   ProblemType: Bug
>   DistroRelease: Ubuntu 12.10
>   Package: linux-image-3.5.0-24-generic 3.5.0-24.37
>   ProcVersionSignature: Ubuntu 3.5.0-24.37-generic 3.5.7.4
>   Uname: Linux 3.5.0-24-generic x86_64
>   ApportVersion: 2.6.1-0ubuntu10
>   Architecture: amd64
>   AudioDevicesInUse:
>    USER        PID ACCESS COMMAND
>    /dev/snd/controlC0:  armando    2178 F.... pulseaudio
>   Date: Fri Feb 15 13:35:01 2013
>   HibernationDevice: RESUME=UUID=300b6aa4-1f4b-4175-b1b2-55ea076c20d4
>   InstallationDate: Installed on 2011-07-01 (594 days ago)
>   InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64
> (20110427.1)
>   MachineType: LENOVO 6475RP9
>   MarkForUpload: True
>   PccardctlIdent:
>    Socket 0:
>      no product info available
>   PccardctlStatus:
>    Socket 0:
>      no card
>   ProcFB: 0 inteldrmfb
>   ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-24-generic
> root=UUID=97a26bb3-a49a-4a82-8c45-1ac3622687f9 ro quiet splash vt.handoff=7
>   PulseList:
>    Error: command ['pacmd', 'list'] failed with exit code 1: Home
> directory /home/armando not ours.
>    No PulseAudio daemon running, or not running as session daemon.
>   RelatedPackageVersions:
>    linux-restricted-modules-3.5.0-24-generic N/A
>    linux-backports-modules-3.5.0-24-generic  N/A
>    linux-firmware                            1.95
>   RfKill:
>    0: phy0: Wireless LAN
>         Soft blocked: no
>         Hard blocked: no
>   SourcePackage: linux
>   StagingDrivers: zram
>   UpgradeStatus: Upgraded to quantal on 2012-12-08 (69 days ago)
>   dmi.bios.date: 12/06/2010
>   dmi.bios.vendor: LENOVO
>   dmi.bios.version: 7UET91WW (3.21 )
>   dmi.board.name: 6475RP9
>   dmi.board.vendor: LENOVO
>   dmi.board.version: Not Available
>   dmi.chassis.asset.tag: No Asset Information
>   dmi.chassis.type: 10
>   dmi.chassis.vendor: LENOVO
>   dmi.chassis.version: Not Available
>   dmi.modalias:
> dmi:bvnLENOVO:bvr7UET91WW(3.21):bd12/06/2010:svnLENOVO:pn6475RP9:pvrThinkPadT400:rvnLENOVO:rn6475RP9:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
>   dmi.product.name: 6475RP9
>   dmi.product.version: ThinkPad T400
>   dmi.sys.vendor: LENOVO
>
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1126329/+subscriptions
>

**************************************************

Revision history for this message

penalvch (penalvch) wrote on 2013-08-04:

#7

Armando Santana, as per http://download.lenovo.com/express/ddfm.html an update is available for your BIOS (3.24). If you update to this, does it change anything?

If not, could you please both specify what happened, and provide the output of the following terminal command:
sudo dmidecode -s bios-version && sudo dmidecode -s bios-release-date

Thank you for your understanding.

description:	updated
tags:	added: bios-outdated-3.24 needs-upstream-testing regression-potential
tags:	added: kernel-bug-exists-upstream-v3.8-rc7
summary:	- Bluetooth can not recongnized + 045e:0745 Bluetooth can not recongnized
summary:	- 045e:0745 Bluetooth can not recongnized + 045e:0745 Bluetooth can not be recognized
Changed in linux (Ubuntu):
status:	Confirmed → Incomplete

Revision history for this message

Launchpad Janitor (janitor) wrote on 2013-10-04:

#8

[Expired for linux (Ubuntu) because there has been no activity for 60 days.]

Changed in linux (Ubuntu):
status:	Incomplete → Expired

Ubuntu
linux package

045e:0745 Bluetooth can not be recognized

Bug Description

Other bug subscribers

Bug attachments

Remote bug watches

Ubuntulinux package

045e:0745 Bluetooth can not be recognized

Bug Description

Other bug subscribers

Bug attachments

Remote bug watches

Ubuntu
linux package