0) I start printing a 2 pages job, while the paper tray holds 1 single page - after the first page is printed, the printer tries to load the second, which is missing - after this the light LED of the printer start flashing - then I insert a new page and go on ...
1)
$ sudo usb_printerid /dev/usb/lp0
Error: No such file or directory: can't open '/dev/usb/lp0'
$ ls -la /dev/usb
totale 0
drwxr-xr-x 2 root root 60 2010-07-15 18:56 .
drwxr-xr-x 17 root root 4040 2010-07-15 18:56 ..
crw-rw---- 1 root root 180, 96 2010-07-15 18:56 hiddev0
Many thanks for Your help.
I tried all the 3 alternatives. Here the output:
0) I start printing a 2 pages job, while the paper tray holds 1 single page - after the first page is printed, the printer tries to load the second, which is missing - after this the light LED of the printer start flashing - then I insert a new page and go on ...
1)
$ sudo usb_printerid /dev/usb/lp0
Error: No such file or directory: can't open '/dev/usb/lp0'
$ ls -la /dev/usb
totale 0
drwxr-xr-x 2 root root 60 2010-07-15 18:56 .
drwxr-xr-x 17 root root 4040 2010-07-15 18:56 ..
crw-rw---- 1 root root 180, 96 2010-07-15 18:56 hiddev0
this doesn't work
2) cups/backend/ usb cups/backend/ usb: Permesso negato cups/backend/ usb LaserJet% 20P1005? serial= BC1R5SS "HP LaserJet P1005" "HP LaserJet P1005" "MFG:Hewlett- Packard; MDL:HP LaserJet P1005;CMD: HBS,PJL, ACL;CLS: PRINTER; DES:HP LaserJet P1005;FWVER: 20080415; " ""
$ /usr/lib/
bash: /usr/lib/
$ sudo !!
sudo /usr/lib/
DEBUG: list_devices_libusb
DEBUG: usb_find_busses=5
DEBUG: usb_find_devices=9
direct usb://HP/
nothing else happens: this doesn't work
3) HP_LaserJet_ P1005?serial= BC1R5SS LaserJet% 20P1005? serial= BC1R5SS
$ lpinfo -v
network ipp
network lpd
direct scsi
network http
network beh
network smb
network socket
direct hp:/usb/
direct usb://HP/
direct hpfax
this tooks 10 seconds to complete, but nothing else happens: this doesn't work
4) After these 3 tests the red LED is still flashing and the paper tray holds the blank page.
FINAL RESULT: at my computer these solutions don't work for me... or I had not understood exactly what to do.
Ciao
CM