impish/linux-raspi: 5.13.0-1007.8 -proposed tracker

[Andrea Righi]

This bug will contain status and test results related to a kernel source (or snap) as stated in the title.

For an explanation of the tasks and the associated workflow see:
  https://wiki.ubuntu.com/Kernel/kernel-sru-workflow

-- swm properties --
built:
  route-entry: 1
delta:
  promote-to-proposed:
  - main
  - meta
  sru-review:
  - main
  - meta
kernel-stable-master-bug: 1942611
packages:
  main: linux-raspi
  meta: linux-meta-raspi
phase: Testing
phase-changed: Monday, 20. September 2021 13:06 UTC
proposed-announcement-sent: true
proposed-testing-requested: true
reason:
  automated-testing: Stalled -- testing FAILED
synthetic:
  :promote-to-as-proposed: Fix Released
variant: debs
versions:
  main: 5.13.0-1007.8
  meta: 5.13.0.1007.13
  source: 5.13.0-1007.8

[Launchpad Janitor (janitor)]

This bug was fixed in the package linux-raspi - 5.13.0-1007.8

---------------
linux-raspi (5.13.0-1007.8) impish; urgency=medium

  * impish/linux-raspi: 5.13.0-1007.8 -proposed tracker (LP: #1943746)

  * impish/linux-raspi: Update to upstream raspberrypi rpi-5.13.y (2021-08-27)
    (LP: #1942881)
    - bcm2835: Allow compressed frames to set sizeimage (#4386)
    - media: i2c: imx477: Fix for long exposure limit calculations
    - ASoC: hdmi-codec: Rework to support more controls
    - snd: iec958: split status creation and fill
    - ASoC: hdmi-codec: Add iec958 controls
    - ASoC: hdmi-codec: Add a prepare hook
    - drm/vc4: Make vc4_crtc_get_encoder public
    - drm/vc4: crtc: Add encoder to vc4_crtc_config_pv prototype
    - drm/vc4: crtc: Rework the encoder retrieval code (again)
    - drm/vc4: crtc: Add some logging
    - drm/vc4: Leverage the load tracker on the BCM2711
    - drm/vc4: Increase the core clock based on HVS load
    - clk: bcm2835: Pass DT node to rpi_firmware_get
    - ARM: dts: Add firmware reference to sdhost node
    - mmc: sdhost: Pass DT pointer to rpi_firmware_get
    - drm/vc4: Register HDMI codec
    - drm/vc4: hdmi: Remove redundant variables
    - media: i2c: imx290: Support 60fps in 2 lane operation
    - media: i2c: imx290: Fix the pixel rate at 148.5Mpix/s
    - media: i2c: imx290: Fix clock setup register assignments
    - drm/vc4: Fix timings for interlaced modes
    - drm/vc4: Don't create hvs_load_tracker on fkms
    - media: rpivid: Fix H265 aux ent reuse of the same slot
    - Support RPi DPI interface in mode6 for 18-bit color
    - overlays: Add dpi18cpadhi, vc4-kms-dpi-at056tn53v1
    - drm: vc4: Fix pixel-wrap issue with DVP teardown
    - drm/vc4: Increase the core clock to a minimum of 500MHz
    - media: i2c: ov9281: Remove override of subdev name
    - drm/vc4: hdmi: Use a fixed rate for the HSM clock on BCM2835
    - drm/vc4: hdmi: Enable the scrambler on reconnection
    - configs: Add CONFIG_MACVTAP=m (arm64 only)
    - staging: vc04_services: isp: Set the YUV420/YVU420 format stride to 64 bytes
    - Documentation: devicetree: Add documentation for imx378 sensor
    - overlays: Add overlay for imx378 sensor
    - media: i2c: imx477: Extend driver to support imx378 sensor
    - overlays: Make i2c-rtc and i2c-rtc-gpio share RTCs
    - dt-bindings: clk: raspberrypi: Remove unused property
    - dt-bindings: display: vc4: Add phandle to the firmware
    - firmware: raspberrypi: Add RPI_FIRMWARE_NOTIFY_DISPLAY_DONE
    - drm/vc4: Remove conflicting framebuffers before callind bind_all
    - drm/vc4: Notify the firmware when DRM is in charge
    - ARM: dts: rpi: Add the firmware node to vc4
    - drm/vc4: hdmi: Put the device on error in pre_crtc_configure
    - drm/vc4: hdmi: Split the CEC disable / enable functions in two
    - drm/vc4: hdmi: Make sure the device is powered with CEC
    - drm/vc4: hdmi: Add missing clk_disable_unprepare on error path
    - drm/vc4: hdmi: Warn if we access the controller while disabled
    - drm/vc4: hdmi: Move initial register read after pm_runtime_get
    - vc4/drv: Only notify firmware of display done with kms
    - dwc_otg: Update NetBSD usb.h header li...