Add support for Dell DW5821e WWAN/GPS module

[Jesse Sung]

== Impact ==
DW5821e doesn't work in Bionic.

== Fix ==
Three commits are required to support it. All of them are already in the mainline kernel.

== Test Case ==
With the command
$ sudo mmcli -L
the device should be listed as a modem.

== Risk of Regression ==
Very low. it only adds the device ID to the right driver.

[AceLan Kao (acelankao)]

This bug is awaiting verification that the kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-bionic' to 'verification-done-bionic'. If the problem still exists, change the tag 'verification-needed-bionic' to 'verification-failed-bionic'.

If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you!

[Launchpad Janitor (janitor)]

This bug was fixed in the package linux-oem - 4.15.0-1030.35

---------------
linux-oem (4.15.0-1030.35) bionic; urgency=medium

  * linux-oem: 4.15.0-1030.35 -proposed tracker (LP: #1806663)

  * Add HMS CAN driver for Dell Edge Gateways (LP: #1807339)
    - SAUCE: (no-up) add IXXAT USB-to-CAN driver

  * Add support for 0cf3:535b QCA_ROME device (LP: #1807333)
    - Bluetooth: btusb: Add support for 0cf3:535b QCA_ROME device

  * Add support for Dell DW5821e WWAN/GPS module (LP: #1807342)
    - qmi_wwan: add support for the Dell Wireless 5821e module
    - qmi_wwan: fix interface number for DW5821e production firmware
    - USB: option: add support for DW5821e

  * Fix Terminus USB hub that may breaks connected USB devices after S3
    (LP: #1806850)
    - USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub

  * The line-out on the Dell Dock station can't work (LP: #1806532)
    - ALSA: usb-audio: Allow to override the longname string
    - ALSA: usb-audio: Give proper vendor/product name for Dell WD15 Dock
    - ALSA: usb-audio: Add vendor and product name for Dell WD19 Dock

  * Enable new Realtek card reader (LP: #1806335)
    - USB: usb-storage: Add new IDs to ums-realtek
    - SAUCE: (noup) USB: usb-storage: Make MMC support optional on ums-realtek

  [ Ubuntu: 4.15.0-43.46 ]

  * linux: 4.15.0-43.46 -proposed tracker (LP: #1806659)
  * System randomly hangs during suspend when mei_wdt is loaded (LP: #1803942)
    - SAUCE: base/dd: limit release function changes to vfio driver only
  * Workaround CSS timeout on AMD SNPS 3.0 xHC (LP: #1806838)
    - xhci: Allow more than 32 quirks
    - xhci: workaround CSS timeout on AMD SNPS 3.0 xHC
  * linux-buildinfo: pull out ABI information into its own package
    (LP: #1806380)
    - [Packaging] limit preparation to linux-libc-dev in headers
    - [Packaging] commonise debhelper invocation
    - [Packaging] ABI -- accumulate abi information at the end of the build
    - [Packaging] buildinfo -- add basic build information
    - [Packaging] buildinfo -- add firmware information to the flavour ABI
    - [Packaging] buildinfo -- add compiler information to the flavour ABI
    - [Packaging] buildinfo -- add buildinfo support to getabis
    - [Config] buildinfo -- add retpoline version markers
  * linux packages should own /usr/lib/linux/triggers (LP: #1770256)
    - [Packaging] own /usr/lib/linux/triggers
  * CVE-2018-12896
    - posix-timers: Sanitize overrun handling
  * CVE-2018-16276
    - USB: yurex: fix out-of-bounds uaccess in read handler
  * CVE-2018-10902
    - ALSA: rawmidi: Change resized buffers atomically
  * CVE-2018-18710
    - cdrom: fix improper type cast, which can leat to information leak.
  * CVE-2018-18690
    - xfs: don't fail when converting shortform attr to long form during
      ATTR_REPLACE
  * CVE-2018-14734
    - infiniband: fix a possible use-after-free bug
  * CVE-2018-18445
    - bpf: 32-bit RSH verification must truncate input before the ALU op
  * Packaging resync (LP: #1786013)
    - [Packaging] update helper scripts

 -- Chia-Lin Kao (AceLan) <email address hidden> Sat, 08 Dec 2018 11:02:54 +0800

[Launchpad Janitor (janitor)]

This bug was fixed in the package linux - 4.15.0-44.47

---------------
linux (4.15.0-44.47) bionic; urgency=medium

  * linux: 4.15.0-44.47 -proposed tracker (LP: #1811419)

  * Packaging resync (LP: #1786013)
    - [Packaging] update helper scripts

  * CPU hard lockup with rigorous writes to NVMe drive (LP: #1810998)
    - blk-wbt: pass in enum wbt_flags to get_rq_wait()
    - blk-wbt: Avoid lock contention and thundering herd issue in wbt_wait
    - blk-wbt: move disable check into get_limit()
    - blk-wbt: use wq_has_sleeper() for wq active check
    - blk-wbt: fix has-sleeper queueing check
    - blk-wbt: abstract out end IO completion handler
    - blk-wbt: improve waking of tasks

  * To reduce the Realtek USB cardreader power consumption (LP: #1811337)
    - mmc: sdhci: Disable 1.8v modes (HS200/HS400/UHS) if controller can't support
      1.8v
    - mmc: core: Introduce MMC_CAP_SYNC_RUNTIME_PM
    - mmc: rtsx_usb_sdmmc: Don't runtime resume the device while changing led
    - mmc: rtsx_usb: Use MMC_CAP2_NO_SDIO
    - mmc: rtsx_usb: Enable MMC_CAP_ERASE to allow erase/discard/trim requests
    - mmc: rtsx_usb_sdmmc: Re-work runtime PM support
    - mmc: rtsx_usb_sdmmc: Re-work card detection/removal support
    - memstick: rtsx_usb_ms: Add missing pm_runtime_disable() in probe function
    - misc: rtsx_usb: Use USB remote wakeup signaling for card insertion detection
    - memstick: Prevent memstick host from getting runtime suspended during card
      detection
    - memstick: rtsx_usb_ms: Use ms_dev() helper
    - memstick: rtsx_usb_ms: Support runtime power management

  * Support non-strict iommu mode on arm64 (LP: #1806488)
    - iommu/io-pgtable-arm: Fix race handling in split_blk_unmap()
    - iommu/arm-smmu-v3: Implement flush_iotlb_all hook
    - iommu/dma: Add support for non-strict mode
    - iommu: Add "iommu.strict" command line option
    - iommu/io-pgtable-arm: Add support for non-strict mode
    - iommu/arm-smmu-v3: Add support for non-strict mode
    - iommu/io-pgtable-arm-v7s: Add support for non-strict mode
    - iommu/arm-smmu: Support non-strict mode

  * ELAN900C:00 04F3:2844 touchscreen doesn't work (LP: #1811335)
    - pinctrl: cannonlake: Fix community ordering for H variant
    - pinctrl: cannonlake: Fix HOSTSW_OWN register offset of H variant

  * Add Cavium ThunderX2 SoC UNCORE PMU driver (LP: #1811200)
    - perf: Export perf_event_update_userpage
    - Documentation: perf: Add documentation for ThunderX2 PMU uncore driver
    - drivers/perf: Add Cavium ThunderX2 SoC UNCORE PMU driver
    - [Config] New config CONFIG_THUNDERX2_PMU=m

  * Update hisilicon SoC-specific drivers (LP: #1810457)
    - SAUCE: Revert "net: hns3: Updates RX packet info fetch in case of multi BD"
    - Revert "UBUNTU: SAUCE: {topost} net: hns3: separate roce from nic when
      resetting"
    - Revert "UBUNTU: SAUCE: {topost} net: hns3: Use roce handle when calling roce
      callback function"
    - Revert "UBUNTU: SAUCE: {topost} net: hns3: Add calling roce callback
      function when link status change"
    - Revert "UBUNTU: SAUCE: {topost} net: hns3: optimize the process of notifying
      roce client"
    - Revert "UBUNTU: S...