smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: SAMSUNG PZA064 SSD Serial Number: SE813S0099 Firmware Version: 2.9.01 User Capacity: 64,023,257,088 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Tue Dec 29 02:24:25 2009 UTC ==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details. SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 15) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 099 099 051 Pre-fail Always - 0 5 Reallocated_Sector_Ct 0x0007 073 073 001 Pre-fail Always - 2351104 9 Power_On_Hours 0x0033 099 099 000 Pre-fail Always - 198 12 Power_Cycle_Count 0x0033 098 098 000 Pre-fail Always - 1398 184 Unknown_Attribute 0x0033 099 099 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0033 100 100 000 Pre-fail Always - 0 188 Unknown_Attribute 0x0033 099 099 000 Pre-fail Always - 0 190 Airflow_Temperature_Cel 0x0023 045 045 040 Pre-fail Always - 0 195 Hardware_ECC_Recovered 0x001a 200 200 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0033 099 099 000 Pre-fail Always - 0 197 Current_Pending_Sector 0x0012 099 099 000 Old_age Always - 0 198 Offline_Uncorrectable 0x003e 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x003e 199 199 000 Old_age Always - 223 200 Multi_Zone_Error_Rate 0x0013 073 073 002 Pre-fail Always - 574 201 Soft_Read_Error_Rate 0x0032 100 100 002 Old_age Always - 0 202 TA_Increase_Count 0x0032 100 100 002 Old_age Always - 0 203 Run_Out_Cancel 0x0013 099 099 023 Pre-fail Always - 1007 SMART Error Log Version: 1 ATA Error Count: 57088 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 57088 occurred at disk power-on lifetime: 4 hours (0 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 37 00 60 e0 Error: ICRC, ABRT at LBA = 0x00600037 = 6291511 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 03 01 37 00 60 e0 08 00:00:45.000 WRITE DMA ca 03 08 3f ef b9 e3 08 00:00:45.000 WRITE DMA ca 03 01 4f 02 00 e0 08 00:00:45.000 WRITE DMA ca 03 08 4f 00 00 e0 08 00:00:45.000 WRITE DMA ca 03 08 47 00 5e e0 08 00:00:45.000 WRITE DMA Error 57087 occurred at disk power-on lifetime: 4 hours (0 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 18 3f 00 60 e0 Error: ICRC, ABRT at LBA = 0x0060003f = 6291519 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 03 18 3f 00 60 e0 08 00:00:45.000 WRITE DMA ca 03 08 ef ee b9 e3 08 00:00:45.000 WRITE DMA ca 03 01 37 00 60 e0 08 00:00:45.000 WRITE DMA ca 03 08 c7 f6 b9 e3 08 00:00:45.000 WRITE DMA ca 03 10 0f f0 b9 e3 08 00:00:45.000 WRITE DMA Error 57086 occurred at disk power-on lifetime: 4 hours (0 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 08 57 ef b9 e3 Error: ICRC, ABRT at LBA = 0x03b9ef57 = 62517079 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 03 08 57 ef b9 e3 08 00:00:45.000 WRITE DMA ca 03 08 3f ef b9 e3 08 00:00:45.000 WRITE DMA ca 03 01 4f 02 00 e0 08 00:00:45.000 WRITE DMA ca 03 08 4f 00 00 e0 08 00:00:45.000 WRITE DMA ca 03 05 2f 00 60 e0 08 00:00:45.000 WRITE DMA Error 57085 occurred at disk power-on lifetime: 4 hours (0 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 08 4f 00 5e e0 Error: ICRC, ABRT at LBA = 0x005e004f = 6160463 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 03 08 4f 00 5e e0 08 00:00:45.000 WRITE DMA c8 03 08 4f 00 00 e0 08 00:00:45.000 READ DMA c8 03 08 6f 00 60 e0 08 00:00:45.000 READ DMA ca 03 20 5f 00 60 e0 08 00:00:45.000 WRITE DMA Error 57084 occurred at disk power-on lifetime: 4 hours (0 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 08 3f ef b9 e3 Error: ICRC, ABRT 8 sectors at LBA = 0x03b9ef3f = 62517055 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 3f ef b9 e3 08 00:00:45.000 READ DMA c8 03 01 4f ef b9 e3 08 00:00:45.000 READ DMA c8 03 08 47 ef b9 e3 08 00:00:45.000 READ DMA c8 03 01 37 00 60 e0 08 00:00:45.000 READ DMA c8 03 08 37 fe b9 e3 08 00:00:45.000 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 198 - # 2 Short offline Completed without error 00% 197 - # 3 Extended offline Interrupted (host reset) 80% 197 - # 4 Short offline Completed without error 00% 197 - # 5 Short offline Completed without error 00% 5 - # 6 Short offline Completed without error 00% 4 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.