[18448.676630] cfg80211: Calling CRDA to update world regulatory domain [18448.689029] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [18448.689035] cfg80211: World regulatory domain updated: [18448.689038] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [18448.689042] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18448.689046] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [18448.689050] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [18448.689054] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18448.689058] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18448.707273] wlan0: direct probe to 6c:50:4d:3e:91:ee (try 1/3) [18448.904079] wlan0: direct probe to 6c:50:4d:3e:91:ee (try 2/3) [18449.104074] wlan0: direct probe to 6c:50:4d:3e:91:ee (try 3/3) [18449.304093] wlan0: direct probe to 6c:50:4d:3e:91:ee timed out [18455.145194] cfg80211: Found new beacon on frequency: 5180 MHz (Ch 36) on phy0 [18456.980980] cfg80211: Found new beacon on frequency: 5765 MHz (Ch 153) on phy0 [18457.327130] wlan0: direct probe to 6c:50:4d:3e:51:8e (try 1/3) [18457.524104] wlan0: direct probe to 6c:50:4d:3e:51:8e (try 2/3) [18457.724077] wlan0: direct probe to 6c:50:4d:3e:51:8e (try 3/3) [18457.924104] wlan0: direct probe to 6c:50:4d:3e:51:8e timed out [18465.814941] wlan0: authenticate with 6c:50:4d:3e:25:b1 (try 1) [18466.012099] wlan0: authenticate with 6c:50:4d:3e:25:b1 (try 2) [18466.212093] wlan0: authenticate with 6c:50:4d:3e:25:b1 (try 3) [18466.412105] wlan0: authentication with 6c:50:4d:3e:25:b1 timed out [18474.299331] wlan0: authenticate with 58:bc:27:92:a6:11 (try 1) [18474.496083] wlan0: authenticate with 58:bc:27:92:a6:11 (try 2) [18474.498627] wlan0: authenticated [18474.506572] wlan0: associate with 58:bc:27:92:a6:11 (try 1) [18474.704079] wlan0: associate with 58:bc:27:92:a6:11 (try 2) [18474.709752] wlan0: RX ReassocResp from 58:bc:27:92:a6:11 (capab=0x431 status=0 aid=1) [18474.709762] wlan0: associated [18474.714474] cfg80211: Calling CRDA for country: US [18474.724801] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [18474.724813] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18474.724821] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [18474.724830] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18474.724837] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [18474.724845] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18474.724852] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [18474.724860] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18474.724867] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [18474.724876] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18474.724882] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [18474.724891] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18474.724897] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [18474.724906] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18474.724913] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [18474.724921] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18474.724928] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [18474.724936] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18474.724943] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [18474.724951] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18474.724958] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [18474.724966] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18474.724973] cfg80211: Disabling freq 2467 MHz [18474.724978] cfg80211: Disabling freq 2472 MHz [18474.724982] cfg80211: Disabling freq 2484 MHz [18474.724987] cfg80211: Disabling freq 5040 MHz [18474.724993] cfg80211: Disabling freq 5060 MHz [18474.724998] cfg80211: Disabling freq 5080 MHz [18474.725004] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [18474.725013] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [18474.725020] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [18474.725028] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [18474.725035] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [18474.725043] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [18474.725050] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [18474.725058] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [18474.725066] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [18474.725074] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18474.725081] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [18474.725089] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18474.725096] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [18474.725104] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18474.725111] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [18474.725120] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18474.725127] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [18474.725135] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18474.725142] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [18474.725150] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18474.725157] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [18474.725166] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18474.725172] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [18474.725181] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18474.725188] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [18474.725196] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18474.725202] cfg80211: Disabling freq 5600 MHz [18474.725207] cfg80211: Disabling freq 5620 MHz [18474.725212] cfg80211: Disabling freq 5640 MHz [18474.725218] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [18474.725226] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18474.725234] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [18474.725242] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18474.725249] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [18474.725257] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18474.725264] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule: [18474.725272] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [18474.725279] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule: [18474.725288] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [18474.725295] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule: [18474.725304] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [18474.725310] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule: [18474.725319] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [18474.725326] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule: [18474.725334] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [18474.725351] cfg80211: Regulatory domain changed to country: US [18474.725356] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [18474.725365] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18474.725373] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [18474.725380] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18474.725388] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18474.725395] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18474.725403] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [18478.024287] cfg80211: All devices are disconnected, going to restore regulatory settings [18478.024299] cfg80211: Restoring regulatory settings [18478.024328] cfg80211: Calling CRDA to update world regulatory domain [18478.035042] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [18478.035053] cfg80211: World regulatory domain updated: [18478.035059] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [18478.035067] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18478.035076] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [18478.035084] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [18478.035092] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18478.035099] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18480.843541] cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0 [18481.016945] cfg80211: Found new beacon on frequency: 5765 MHz (Ch 153) on phy0 [18481.263397] cfg80211: Found new beacon on frequency: 5805 MHz (Ch 161) on phy0 [18481.477018] wlan0: direct probe to 6c:50:4d:3e:40:ee (try 1/3) [18481.478462] wlan0: direct probe responded [18481.492046] wlan0: authenticate with 6c:50:4d:3e:40:ee (try 1) [18481.492598] wlan0: authenticated [18481.492862] wlan0: associate with 6c:50:4d:3e:40:ee (try 1) [18481.495649] wlan0: RX ReassocResp from 6c:50:4d:3e:40:ee (capab=0x11 status=0 aid=1) [18481.495654] wlan0: associated [18481.496992] cfg80211: Calling CRDA for country: US [18481.503227] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [18481.503233] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18481.503237] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [18481.503242] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18481.503245] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [18481.503250] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18481.503253] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [18481.503257] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18481.503261] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [18481.503265] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18481.503268] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [18481.503273] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18481.503276] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [18481.503280] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18481.503284] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [18481.503288] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18481.503291] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [18481.503295] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18481.503299] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [18481.503303] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18481.503306] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [18481.503310] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18481.503314] cfg80211: Disabling freq 2467 MHz [18481.503316] cfg80211: Disabling freq 2472 MHz [18481.503318] cfg80211: Disabling freq 2484 MHz [18481.503321] cfg80211: Disabling freq 5040 MHz [18481.503323] cfg80211: Disabling freq 5060 MHz [18481.503326] cfg80211: Disabling freq 5080 MHz [18481.503329] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [18481.503333] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [18481.503337] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [18481.503341] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [18481.503344] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [18481.503348] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [18481.503352] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [18481.503356] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [18481.503360] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [18481.503364] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18481.503367] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [18481.503371] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18481.503375] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [18481.503379] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18481.503383] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [18481.503387] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18481.503390] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [18481.503395] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18481.503398] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [18481.503402] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18481.503406] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [18481.503410] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18481.503413] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [18481.503417] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18481.503421] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [18481.503425] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18481.503429] cfg80211: Disabling freq 5600 MHz [18481.503431] cfg80211: Disabling freq 5620 MHz [18481.503433] cfg80211: Disabling freq 5640 MHz [18481.503436] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [18481.503441] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18481.503444] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [18481.503448] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18481.503452] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [18481.503456] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18481.503460] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule: [18481.503464] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [18481.503467] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule: [18481.503471] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [18481.503475] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule: [18481.503479] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [18481.503483] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule: [18481.503487] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [18481.503490] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule: [18481.503494] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [18481.503503] cfg80211: Regulatory domain changed to country: US [18481.503506] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [18481.503510] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18481.503514] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [18481.503518] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18481.503521] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18481.503525] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18481.503529] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [18481.521643] cfg80211: Found new beacon on frequency: 5805 MHz (Ch 161) on phy0 [18494.740129] cfg80211: Found new beacon on frequency: 5180 MHz (Ch 36) on phy0 [18495.159261] cfg80211: Found new beacon on frequency: 5200 MHz (Ch 40) on phy0 [18498.814537] cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0 [18506.032336] cfg80211: All devices are disconnected, going to restore regulatory settings [18506.032349] cfg80211: Restoring regulatory settings [18506.032361] cfg80211: Calling CRDA to update world regulatory domain [18506.042370] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [18506.042380] cfg80211: World regulatory domain updated: [18506.042386] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [18506.042395] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18506.042403] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [18506.042411] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [18506.042419] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18506.042427] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18507.122171] cfg80211: Found new beacon on frequency: 5240 MHz (Ch 48) on phy0 [18508.890315] cfg80211: Found new beacon on frequency: 5785 MHz (Ch 157) on phy0 [18509.207938] wlan0: direct probe to 00:23:eb:2d:ed:9e (try 1/3) [18509.208573] wlan0: direct probe responded [18509.232043] wlan0: authenticate with 00:23:eb:2d:ed:9e (try 1) [18509.232724] wlan0: authenticated [18509.233037] wlan0: associate with 00:23:eb:2d:ed:9e (try 1) [18509.235995] wlan0: RX ReassocResp from 00:23:eb:2d:ed:9e (capab=0x11 status=0 aid=3) [18509.236024] wlan0: associated [18509.237053] cfg80211: Calling CRDA for country: US [18509.242312] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [18509.242319] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18509.242323] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [18509.242327] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18509.242331] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [18509.242335] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18509.242339] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [18509.242343] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18509.242346] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [18509.242350] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18509.242354] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [18509.242358] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18509.242361] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [18509.242365] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18509.242369] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [18509.242373] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18509.242376] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [18509.242381] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18509.242384] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [18509.242388] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18509.242392] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [18509.242396] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18509.242399] cfg80211: Disabling freq 2467 MHz [18509.242401] cfg80211: Disabling freq 2472 MHz [18509.242404] cfg80211: Disabling freq 2484 MHz [18509.242406] cfg80211: Disabling freq 5040 MHz [18509.242409] cfg80211: Disabling freq 5060 MHz [18509.242411] cfg80211: Disabling freq 5080 MHz [18509.242414] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [18509.242418] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [18509.242422] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [18509.242426] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [18509.242429] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [18509.242434] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [18509.242437] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [18509.242441] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [18509.242445] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [18509.242449] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18509.242453] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [18509.242457] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18509.242461] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [18509.242465] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18509.242468] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [18509.242472] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18509.242476] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [18509.242480] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18509.242484] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [18509.242488] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18509.242491] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [18509.242495] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18509.242499] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [18509.242503] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18509.242506] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [18509.242511] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18509.242514] cfg80211: Disabling freq 5600 MHz [18509.242516] cfg80211: Disabling freq 5620 MHz [18509.242518] cfg80211: Disabling freq 5640 MHz [18509.242521] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [18509.242526] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18509.242529] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [18509.242533] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18509.242537] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [18509.242541] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18509.242545] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule: [18509.242549] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [18509.242552] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule: [18509.242556] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [18509.242560] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule: [18509.242564] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [18509.242567] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule: [18509.242572] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [18509.242575] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule: [18509.242579] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [18509.242588] cfg80211: Regulatory domain changed to country: US [18509.242591] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [18509.242595] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18509.242599] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [18509.242602] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18509.242606] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18509.242610] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18509.242614] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [18509.345973] cfg80211: Found new beacon on frequency: 5805 MHz (Ch 161) on phy0 [18523.473453] cfg80211: Found new beacon on frequency: 5200 MHz (Ch 40) on phy0 [18523.993003] cfg80211: Found new beacon on frequency: 5240 MHz (Ch 48) on phy0 [18527.100902] cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0 [18527.948614] cfg80211: Found new beacon on frequency: 5785 MHz (Ch 157) on phy0 [18528.678971] wlan0: direct probe to 00:23:eb:2d:f1:be (try 1/3) [18528.679637] wlan0: direct probe responded [18528.692117] wlan0: authenticate with 00:23:eb:2d:f1:be (try 1) [18528.692803] wlan0: authenticated [18528.747790] wlan0: associate with 00:23:eb:2d:f1:be (try 1) [18528.750782] wlan0: RX ReassocResp from 00:23:eb:2d:f1:be (capab=0x11 status=0 aid=1) [18528.750791] wlan0: associated [18557.735029] wlan0: authenticate with 00:23:eb:2d:ed:9e (try 1) [18557.735747] wlan0: authenticated [18557.757053] wlan0: associate with 00:23:eb:2d:ed:9e (try 1) [18557.760189] wlan0: RX ReassocResp from 00:23:eb:2d:ed:9e (capab=0x11 status=0 aid=3) [18557.760197] wlan0: associated [18586.130687] wlan0: authenticate with 00:23:eb:2d:f1:be (try 1) [18586.131396] wlan0: authenticated [18586.140419] wlan0: associate with 00:23:eb:2d:f1:be (try 1) [18586.143883] wlan0: RX ReassocResp from 00:23:eb:2d:f1:be (capab=0x11 status=0 aid=2) [18586.143888] wlan0: associated [18679.540122] wlan0: authenticate with 00:23:eb:80:20:ce (try 1) [18679.540830] wlan0: authenticated [18679.563764] wlan0: associate with 00:23:eb:80:20:ce (try 1) [18679.567011] wlan0: RX ReassocResp from 00:23:eb:80:20:ce (capab=0x11 status=0 aid=40) [18679.567016] wlan0: associated [18707.919387] wlan0: authenticate with 00:23:eb:2d:f0:7e (try 1) [18707.920117] wlan0: authenticated [18707.941905] wlan0: associate with 00:23:eb:2d:f0:7e (try 1) [18707.944932] wlan0: RX ReassocResp from 00:23:eb:2d:f0:7e (capab=0x11 status=0 aid=2) [18707.944941] wlan0: associated [18879.740065] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf8200000-0xf821ffff] (PCI address [0xf8200000-0xf821ffff]) [18879.740084] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf8225000-0xf8225fff] (PCI address [0xf8225000-0xf8225fff]) [18879.740099] e1000e 0000:00:19.0: BAR 2: set to [io 0x1840-0x185f] (PCI address [0x1840-0x185f]) [18879.740132] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [18879.740179] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [18879.740245] e1000e 0000:00:19.0: PME# disabled [18879.740394] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [18880.086172] e1000e 0000:00:19.0: PME# enabled [18880.311816] wlan0: deauthenticating from 00:23:eb:2d:f0:7e by local choice (reason=3) [18880.365188] cfg80211: All devices are disconnected, going to restore regulatory settings [18880.365197] cfg80211: Restoring regulatory settings [18880.365213] cfg80211: Calling CRDA to update world regulatory domain [18880.378116] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [18880.378122] cfg80211: World regulatory domain updated: [18880.378125] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [18880.378129] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18880.378134] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [18880.378138] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [18880.378141] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18880.378145] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18880.403185] batman_adv: bat0: Interface deactivated: wlan0 [18880.912104] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf8200000-0xf821ffff] (PCI address [0xf8200000-0xf821ffff]) [18880.912122] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf8225000-0xf8225fff] (PCI address [0xf8225000-0xf8225fff]) [18880.912137] e1000e 0000:00:19.0: BAR 2: set to [io 0x1840-0x185f] (PCI address [0x1840-0x185f]) [18880.912168] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [18880.912213] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [18880.912303] e1000e 0000:00:19.0: PME# disabled [18881.777576] PM: Syncing filesystems ... done. [18881.808626] PM: Preparing system for mem sleep [18881.960203] Freezing user space processes ... (elapsed 0.01 seconds) done. [18881.976080] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [18881.992075] PM: Entering mem sleep [18881.992110] Suspending console(s) (use no_console_suspend to debug) [18881.992819] sd 0:0:0:0: [sda] Synchronizing SCSI cache [18881.993194] sd 0:0:0:0: [sda] Stopping disk [18882.056366] serial 00:0a: disabled [18882.056854] uhci_hcd 0000:00:1d.1: PCI INT B disabled [18882.056870] uhci_hcd 0000:00:1d.0: PCI INT A disabled [18882.056886] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [18882.056902] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [18882.058531] sdhci-pci 0000:05:00.2: PCI INT C disabled [18882.058579] ehci_hcd 0000:00:1a.7: PCI INT C disabled [18882.058597] uhci_hcd 0000:00:1a.1: PCI INT B disabled [18882.058618] uhci_hcd 0000:00:1a.0: PCI INT A disabled [18882.058692] ata_piix 0000:00:1f.1: PCI INT C disabled [18882.061190] e1000e 0000:00:19.0: PME# enabled [18882.061199] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [18882.064096] ACPI handle has no context! [18882.072055] ehci_hcd 0000:00:1d.7: PCI INT D disabled [18882.072093] i915 0000:00:02.0: power state changed by ACPI to D3 [18882.160366] snd_hda_intel 0000:00:1b.0: PCI INT B disabled [18882.176055] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 119.143 msecs [18882.269356] PM: suspend of drv:sd dev:0:0:0:0 complete after 276.543 msecs [18882.269388] PM: suspend of drv:scsi dev:target0:0:0 complete after 276.506 msecs [18882.269420] PM: suspend of drv:scsi dev:host0 complete after 261.744 msecs [18882.284087] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 227.270 msecs [18882.284131] PM: suspend of drv: dev:pci0000:00 complete after 225.056 msecs [18882.284139] PM: suspend of devices complete after 291.767 msecs [18882.284142] PM: suspend devices took 0.292 seconds [18882.300416] ehci_hcd 0000:00:1d.7: PME# enabled [18882.300424] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI [18882.316090] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [18882.316197] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI [18882.356092] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [18882.356099] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D2 [18882.356446] ehci_hcd 0000:00:1a.7: PME# enabled [18882.356452] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI [18882.372093] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [18882.372201] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI [18882.372207] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D2 [18882.372307] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [18882.372467] PM: late suspend of devices complete after 88.323 msecs [18882.372952] ACPI: Preparing to enter system sleep state S3 [18882.544140] PM: Saving platform NVS memory [18882.544462] Disabling non-boot CPUs ... [18882.648087] CPU 1 is now offline [18882.648605] Extended CMOS year: 2000 [18882.648605] ACPI: Low-level resume complete [18882.648605] PM: Restoring platform NVS memory [18882.648605] Extended CMOS year: 2000 [18882.648605] Enabling non-boot CPUs ... [18882.648605] Booting Node 0 Processor 1 APIC 0x1 [18882.648605] smpboot cpu 1: start_ip = 99000 [18882.546048] Initializing CPU#1 [18882.546048] Calibrating delay loop (skipped) already calibrated this CPU [18882.660331] NMI watchdog enabled, takes one hw-pmu counter. [18882.680207] CPU1 is up [18882.682907] ACPI: Waking up from system sleep state S3 [18883.192340] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [18883.192375] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [18883.192526] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [18883.192563] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [18883.192575] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [18883.192578] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [18883.192624] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [18883.192661] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI [18883.192665] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [18883.192669] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [18883.192735] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [18883.192761] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI [18883.192772] ehci_hcd 0000:00:1a.7: PME# disabled [18883.192776] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [18883.192783] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [18883.192866] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [18883.192972] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [18883.193121] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [18883.193200] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [18883.193204] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [18883.193253] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [18883.232103] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [18883.232108] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [18883.232112] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [18883.232176] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [18883.232213] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI [18883.232288] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [18883.232325] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI [18883.232335] ehci_hcd 0000:00:1d.7: PME# disabled [18883.232339] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [18883.232346] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [18883.232418] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007) [18883.232653] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [18883.248097] firewire_ohci 0000:05:00.1: BAR 0: set to [mem 0xd7efe800-0xd7efefff] (PCI address [0xd7efe800-0xd7efefff]) [18883.248139] firewire_ohci 0000:05:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802000) [18883.248149] firewire_ohci 0000:05:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [18883.264096] sdhci-pci 0000:05:00.2: BAR 0: set to [mem 0xd7efe400-0xd7efe4ff] (PCI address [0xd7efe400-0xd7efe4ff]) [18883.264143] sdhci-pci 0000:05:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804000) [18883.264153] sdhci-pci 0000:05:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [18883.264919] PM: early resume of devices complete after 72.789 msecs [18883.265036] i915 0000:00:02.0: power state changed by ACPI to D0 [18883.265042] i915 0000:00:02.0: power state changed by ACPI to D0 [18883.265049] i915 0000:00:02.0: setting latency timer to 64 [18883.265084] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [18883.266215] e1000e 0000:00:19.0: PME# disabled [18883.270090] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [18883.280547] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [18883.280560] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [18883.280597] usb usb3: root hub lost power or was reset [18883.280620] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [18883.280624] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [18883.280630] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [18883.280638] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [18883.280667] usb usb4: root hub lost power or was reset [18883.280683] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [18883.280690] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [18883.280697] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [18883.280706] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [18883.280745] snd_hda_intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [18883.280753] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [18883.280808] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [18883.280864] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [18883.280880] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [18883.280889] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [18883.280893] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [18883.280899] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [18883.280908] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [18883.280936] usb usb5: root hub lost power or was reset [18883.280953] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [18883.280961] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [18883.280989] usb usb6: root hub lost power or was reset [18883.281006] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [18883.281012] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [18883.281020] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [18883.281028] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [18883.281065] pci 0000:00:1e.0: setting latency timer to 64 [18883.281083] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [18883.281090] ata_piix 0000:00:1f.1: setting latency timer to 64 [18883.281117] ahci 0000:00:1f.2: setting latency timer to 64 [18883.281190] sdhci-pci 0000:05:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [18883.281194] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [18883.283750] sd 0:0:0:0: [sda] Starting disk [18883.284667] ata5: port disabled--ignoring [18883.299938] serial 00:0a: activated [18883.340363] Extended CMOS year: 2000 [18883.344140] firewire_core: skipped bus generations, destroying all nodes [18883.372405] PM: resume of drv:i915 dev:0000:00:02.0 complete after 107.383 msecs [18883.400108] PM: resume of drv:hub dev:4-0:1.0 complete after 116.795 msecs [18883.400118] PM: resume of drv: dev:ep_00 complete after 116.760 msecs [18883.400126] PM: resume of drv: dev:ep_81 complete after 116.789 msecs [18883.400131] PM: resume of drv:hub dev:3-0:1.0 complete after 117.499 msecs [18883.400142] PM: resume of drv: dev:ep_00 complete after 116.471 msecs [18883.400146] PM: resume of drv: dev:ep_00 complete after 117.429 msecs [18883.400151] PM: resume of drv:hub dev:6-0:1.0 complete after 116.523 msecs [18883.400154] PM: resume of drv: dev:ep_81 complete after 117.519 msecs [18883.400160] PM: resume of drv: dev:ep_81 complete after 116.510 msecs [18883.504064] PM: resume of drv: dev:ep_00 complete after 220.528 msecs [18883.504074] PM: resume of drv:hub dev:5-0:1.0 complete after 220.581 msecs [18883.504092] PM: resume of drv: dev:ep_81 complete after 220.579 msecs [18883.604059] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [18883.604690] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [18883.604697] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [18883.604703] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [18883.606053] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [18883.606060] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [18883.606066] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [18883.606738] ata1.00: configured for UDMA/133 [18883.616285] usb 5-1: reset full-speed USB device number 2 using uhci_hcd [18883.621679] PM: resume of drv:sd dev:0:0:0:0 complete after 337.981 msecs [18883.621699] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 281.285 msecs [18883.621735] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 337.931 msecs [18883.623291] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 358.213 msecs [18883.844075] firewire_core: rediscovered device fw0 [18883.976076] PM: resume of drv: dev:ep_00 complete after 692.161 msecs [18883.976090] PM: resume of drv:hub dev:5-1:1.0 complete after 692.214 msecs [18883.976108] PM: resume of drv: dev:ep_81 complete after 692.216 msecs [18884.049433] usb 5-1.2: reset full-speed USB device number 4 using uhci_hcd [18884.163429] PM: resume of drv:usbhid dev:5-1.2:1.0 complete after 879.246 msecs [18884.163435] PM: resume of drv: dev:ep_00 complete after 879.202 msecs [18884.163448] PM: resume of drv: dev:ep_81 complete after 879.246 msecs [18884.221434] usb 5-1.1: reset full-speed USB device number 3 using uhci_hcd [18884.335432] PM: resume of drv: dev:ep_00 complete after 1051.297 msecs [18884.335442] PM: resume of drv:usbhid dev:5-1.1:1.0 complete after 1051.485 msecs [18884.335470] PM: resume of drv: dev:ep_81 complete after 1051.484 msecs [18884.335479] PM: resume of drv:generic-usb dev:0003:0A5C:4502.0001 complete after 712.040 msecs [18884.393428] usb 5-1.3: reset full-speed USB device number 5 using uhci_hcd [18884.506414] btusb 5-1.3:1.0: no reset_resume for driver btusb? [18884.506419] btusb 5-1.3:1.1: no reset_resume for driver btusb? [18884.756264] PM: resume of drv:usb dev:5-1.3:1.0 complete after 1471.973 msecs [18884.756269] PM: resume of drv:usb dev:5-1.3:1.3 complete after 1471.703 msecs [18884.756279] PM: resume of drv:usb dev:5-1.3:1.1 complete after 1471.901 msecs [18884.756283] PM: resume of drv: dev:ep_00 complete after 1471.675 msecs [18884.756290] PM: resume of drv:usb dev:5-1.3:1.2 complete after 1471.794 msecs [18884.756294] PM: resume of drv:bluetooth dev:hci0 complete after 280.146 msecs [18884.756301] PM: resume of drv: dev:ep_81 complete after 1471.989 msecs [18884.756318] PM: resume of drv: dev:ep_04 complete after 1471.779 msecs [18884.756322] PM: resume of drv: dev:ep_82 complete after 1471.986 msecs [18884.756327] PM: resume of drv: dev:ep_84 complete after 1471.811 msecs [18884.756330] PM: resume of drv: dev:ep_02 complete after 1471.976 msecs [18884.756334] PM: resume of drv: dev:ep_03 complete after 1471.862 msecs [18884.756338] PM: resume of drv: dev:ep_83 complete after 1471.887 msecs [18884.756352] PM: resume of devices complete after 1491.383 msecs [18884.756723] PM: resume devices took 1.492 seconds [18884.756768] PM: Finishing wakeup. [18884.756771] Restarting tasks ... done. [18884.799748] video LNXVIDEO:00: Restoring backlight state [18884.817256] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [18886.303244] e1000e 0000:00:19.0: PME# enabled [18886.452049] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf8200000-0xf821ffff] (PCI address [0xf8200000-0xf821ffff]) [18886.452060] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf8225000-0xf8225fff] (PCI address [0xf8225000-0xf8225fff]) [18886.452069] e1000e 0000:00:19.0: BAR 2: set to [io 0x1840-0x185f] (PCI address [0x1840-0x185f]) [18886.452091] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [18886.452123] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [18886.452184] e1000e 0000:00:19.0: PME# disabled [18886.825391] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [18886.880118] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [18886.880437] ADDRCONF(NETDEV_UP): eth0: link is not ready [18886.891850] ADDRCONF(NETDEV_UP): wlan0: link is not ready [18886.891861] batman_adv: bat0: Interface activated: wlan0 [18888.124584] e1000e 0000:00:19.0: PME# enabled [18894.093189] wlan0: authenticate with 94:44:52:0a:32:72 (try 1) [18894.095454] wlan0: authenticated [18894.095861] wlan0: associate with 94:44:52:0a:32:72 (try 1) [18894.098510] wlan0: RX AssocResp from 94:44:52:0a:32:72 (capab=0x411 status=0 aid=1) [18894.098516] wlan0: associated [18894.099267] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [18905.160019] wlan0: no IPv6 routers present [20309.748048] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf8200000-0xf821ffff] (PCI address [0xf8200000-0xf821ffff]) [20309.748059] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf8225000-0xf8225fff] (PCI address [0xf8225000-0xf8225fff]) [20309.748067] e1000e 0000:00:19.0: BAR 2: set to [io 0x1840-0x185f] (PCI address [0x1840-0x185f]) [20309.748089] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [20309.748120] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [20309.748163] e1000e 0000:00:19.0: PME# disabled [20309.748265] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [20310.098164] e1000e 0000:00:19.0: PME# enabled [20310.325750] wlan0: deauthenticating from 94:44:52:0a:32:72 by local choice (reason=3) [20310.364364] cfg80211: All devices are disconnected, going to restore regulatory settings [20310.364376] cfg80211: Restoring regulatory settings [20310.364386] cfg80211: Calling CRDA to update world regulatory domain [20310.374249] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [20310.374255] cfg80211: World regulatory domain updated: [20310.374258] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [20310.374262] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [20310.374266] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [20310.374270] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [20310.374274] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [20310.374278] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [20310.418918] batman_adv: bat0: Interface deactivated: wlan0 [20310.920081] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf8200000-0xf821ffff] (PCI address [0xf8200000-0xf821ffff]) [20310.920099] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf8225000-0xf8225fff] (PCI address [0xf8225000-0xf8225fff]) [20310.920114] e1000e 0000:00:19.0: BAR 2: set to [io 0x1840-0x185f] (PCI address [0x1840-0x185f]) [20310.920145] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [20310.920190] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [20310.920279] e1000e 0000:00:19.0: PME# disabled [20312.145626] PM: Syncing filesystems ... done. [20312.181477] PM: Preparing system for mem sleep [20312.520166] Freezing user space processes ... (elapsed 0.01 seconds) done. [20312.536065] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [20312.552058] PM: Entering mem sleep [20312.552091] Suspending console(s) (use no_console_suspend to debug) [20312.552862] sd 0:0:0:0: [sda] Synchronizing SCSI cache [20312.553059] sd 0:0:0:0: [sda] Stopping disk [20312.616347] serial 00:0a: disabled [20312.616895] ata_piix 0000:00:1f.1: PCI INT C disabled [20312.616926] uhci_hcd 0000:00:1d.1: PCI INT B disabled [20312.616943] uhci_hcd 0000:00:1d.0: PCI INT A disabled [20312.616960] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [20312.616976] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [20312.617476] ehci_hcd 0000:00:1a.7: PCI INT C disabled [20312.617500] uhci_hcd 0000:00:1a.1: PCI INT B disabled [20312.617523] uhci_hcd 0000:00:1a.0: PCI INT A disabled [20312.617543] sdhci-pci 0000:05:00.2: PCI INT C disabled [20312.620081] e1000e 0000:00:19.0: PME# enabled [20312.620090] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [20312.624130] ACPI handle has no context! [20312.632081] i915 0000:00:02.0: power state changed by ACPI to D3 [20312.636055] ehci_hcd 0000:00:1d.7: PCI INT D disabled [20312.720419] snd_hda_intel 0000:00:1b.0: PCI INT B disabled [20312.736082] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 119.096 msecs [20312.827754] PM: suspend of drv:sd dev:0:0:0:0 complete after 274.898 msecs [20312.827786] PM: suspend of drv:scsi dev:target0:0:0 complete after 274.876 msecs [20312.827814] PM: suspend of drv:scsi dev:host0 complete after 257.341 msecs [20312.844087] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 227.304 msecs [20312.844116] PM: suspend of drv: dev:pci0000:00 complete after 226.075 msecs [20312.844153] PM: suspend of devices complete after 291.773 msecs [20312.844156] PM: suspend devices took 0.292 seconds [20312.860434] ehci_hcd 0000:00:1d.7: PME# enabled [20312.860442] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI [20312.876103] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [20312.876209] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI [20312.916107] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [20312.916114] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D2 [20312.916457] ehci_hcd 0000:00:1a.7: PME# enabled [20312.916464] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI [20312.932103] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [20312.932213] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI [20312.932224] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D2 [20312.932318] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [20312.932482] PM: late suspend of devices complete after 88.322 msecs [20312.932964] ACPI: Preparing to enter system sleep state S3 [20313.104139] PM: Saving platform NVS memory [20313.104466] Disabling non-boot CPUs ... [20313.208076] CPU 1 is now offline [20313.208600] Extended CMOS year: 2000 [20313.208600] ACPI: Low-level resume complete [20313.208600] PM: Restoring platform NVS memory [20313.208600] Extended CMOS year: 2000 [20313.208600] Enabling non-boot CPUs ... [20313.208600] Booting Node 0 Processor 1 APIC 0x1 [20313.208600] smpboot cpu 1: start_ip = 99000 [20313.106049] Initializing CPU#1 [20313.106049] Calibrating delay loop (skipped) already calibrated this CPU [20313.220366] NMI watchdog enabled, takes one hw-pmu counter. [20313.240193] CPU1 is up [20313.242902] ACPI: Waking up from system sleep state S3 [20313.768324] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [20313.768359] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [20313.768513] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [20313.768550] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [20313.768562] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [20313.768565] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [20313.768618] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [20313.768655] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI [20313.768659] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [20313.768663] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [20313.768725] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [20313.768754] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI [20313.768764] ehci_hcd 0000:00:1a.7: PME# disabled [20313.768768] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [20313.768776] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [20313.768866] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [20313.768973] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [20313.769126] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [20313.769203] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [20313.769206] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [20313.769262] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [20313.808101] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [20313.808106] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [20313.808110] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [20313.808159] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [20313.808206] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI [20313.808283] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [20313.808315] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI [20313.808326] ehci_hcd 0000:00:1d.7: PME# disabled [20313.808330] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [20313.808337] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [20313.808406] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007) [20313.808648] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [20313.824097] firewire_ohci 0000:05:00.1: BAR 0: set to [mem 0xd7efe800-0xd7efefff] (PCI address [0xd7efe800-0xd7efefff]) [20313.824140] firewire_ohci 0000:05:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802000) [20313.824150] firewire_ohci 0000:05:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [20313.840097] sdhci-pci 0000:05:00.2: BAR 0: set to [mem 0xd7efe400-0xd7efe4ff] (PCI address [0xd7efe400-0xd7efe4ff]) [20313.840145] sdhci-pci 0000:05:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804000) [20313.840155] sdhci-pci 0000:05:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [20313.840918] PM: early resume of devices complete after 72.795 msecs [20313.841036] i915 0000:00:02.0: power state changed by ACPI to D0 [20313.841042] i915 0000:00:02.0: power state changed by ACPI to D0 [20313.841049] i915 0000:00:02.0: setting latency timer to 64 [20313.841083] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [20313.843999] e1000e 0000:00:19.0: PME# disabled [20313.846099] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [20313.856554] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [20313.856568] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [20313.856607] usb usb3: root hub lost power or was reset [20313.856627] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [20313.856631] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [20313.856638] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [20313.856646] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [20313.856674] usb usb4: root hub lost power or was reset [20313.856692] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [20313.856697] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [20313.856705] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [20313.856714] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [20313.856754] snd_hda_intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [20313.856762] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [20313.856816] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [20313.856874] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [20313.856890] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [20313.856899] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [20313.856903] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [20313.856909] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [20313.856918] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [20313.856946] usb usb5: root hub lost power or was reset [20313.856963] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [20313.856971] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [20313.857000] usb usb6: root hub lost power or was reset [20313.857016] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [20313.857022] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [20313.857030] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [20313.857039] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [20313.857076] pci 0000:00:1e.0: setting latency timer to 64 [20313.857094] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [20313.857101] ata_piix 0000:00:1f.1: setting latency timer to 64 [20313.857128] ahci 0000:00:1f.2: setting latency timer to 64 [20313.857199] sdhci-pci 0000:05:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [20313.857203] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [20313.859346] ata5: port disabled--ignoring [20313.859827] sd 0:0:0:0: [sda] Starting disk [20313.875532] serial 00:0a: activated [20313.912450] Extended CMOS year: 2000 [20313.920156] firewire_core: skipped bus generations, destroying all nodes [20313.948634] PM: resume of drv:i915 dev:0000:00:02.0 complete after 107.611 msecs [20313.976109] PM: resume of drv:hub dev:4-0:1.0 complete after 116.723 msecs [20313.976115] PM: resume of drv:hub dev:6-0:1.0 complete after 116.408 msecs [20313.976120] PM: resume of drv: dev:ep_00 complete after 116.601 msecs [20313.976124] PM: resume of drv: dev:ep_00 complete after 116.322 msecs [20313.976128] PM: resume of drv: dev:ep_81 complete after 116.632 msecs [20313.976134] PM: resume of drv: dev:ep_81 complete after 116.354 msecs [20313.976179] PM: resume of drv: dev:ep_00 complete after 117.435 msecs [20313.976187] PM: resume of drv:hub dev:3-0:1.0 complete after 117.545 msecs [20313.976217] PM: resume of drv: dev:ep_81 complete after 117.497 msecs [20314.080062] PM: resume of drv: dev:ep_00 complete after 220.407 msecs [20314.080083] PM: resume of drv:hub dev:5-0:1.0 complete after 220.515 msecs [20314.080097] PM: resume of drv: dev:ep_81 complete after 220.464 msecs [20314.180065] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [20314.181013] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [20314.181020] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [20314.181027] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [20314.182579] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [20314.182585] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [20314.182592] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [20314.183149] ata1.00: configured for UDMA/133 [20314.192067] usb 5-1: reset full-speed USB device number 2 using uhci_hcd [20314.196274] PM: resume of drv:sd dev:0:0:0:0 complete after 336.444 msecs [20314.196286] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 283.798 msecs [20314.196324] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 336.426 msecs [20314.197925] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 356.847 msecs [20314.420089] firewire_core: rediscovered device fw0 [20314.556072] PM: resume of drv: dev:ep_00 complete after 695.950 msecs [20314.556080] PM: resume of drv:hub dev:5-1:1.0 complete after 696.135 msecs [20314.556104] PM: resume of drv: dev:ep_81 complete after 696.004 msecs [20314.629596] usb 5-1.2: reset full-speed USB device number 4 using uhci_hcd [20314.743592] PM: resume of drv: dev:ep_00 complete after 883.278 msecs [20314.743602] PM: resume of drv:usbhid dev:5-1.2:1.0 complete after 883.331 msecs [20314.743629] PM: resume of drv: dev:ep_81 complete after 883.331 msecs [20314.801596] usb 5-1.1: reset full-speed USB device number 3 using uhci_hcd [20314.915594] PM: resume of drv: dev:ep_00 complete after 1055.365 msecs [20314.915604] PM: resume of drv:usbhid dev:5-1.1:1.0 complete after 1055.441 msecs [20314.915630] PM: resume of drv: dev:ep_81 complete after 1055.446 msecs [20314.915639] PM: resume of drv:generic-usb dev:0003:0A5C:4502.0001 complete after 717.568 msecs [20314.973590] usb 5-1.3: reset full-speed USB device number 5 using uhci_hcd [20315.087576] btusb 5-1.3:1.0: no reset_resume for driver btusb? [20315.087581] btusb 5-1.3:1.1: no reset_resume for driver btusb? [20315.336275] PM: resume of drv:usb dev:5-1.3:1.0 complete after 1475.866 msecs [20315.336289] PM: resume of drv: dev:ep_00 complete after 1475.619 msecs [20315.336296] PM: resume of drv:usb dev:5-1.3:1.3 complete after 1475.647 msecs [20315.336304] PM: resume of drv: dev:ep_81 complete after 1475.874 msecs [20315.336308] PM: resume of drv:usb dev:5-1.3:1.2 complete after 1475.721 msecs [20315.336314] PM: resume of drv:bluetooth dev:hci0 complete after 280.168 msecs [20315.336319] PM: resume of drv:usb dev:5-1.3:1.1 complete after 1475.822 msecs [20315.336341] PM: resume of drv: dev:ep_03 complete after 1475.800 msecs [20315.336345] PM: resume of drv: dev:ep_82 complete after 1475.889 msecs [20315.336349] PM: resume of drv: dev:ep_83 complete after 1475.832 msecs [20315.336352] PM: resume of drv: dev:ep_02 complete after 1475.878 msecs [20315.336357] PM: resume of drv: dev:ep_04 complete after 1475.728 msecs [20315.336360] PM: resume of drv: dev:ep_84 complete after 1475.754 msecs [20315.336374] PM: resume of devices complete after 1495.405 msecs [20315.336764] PM: resume devices took 1.496 seconds [20315.336809] PM: Finishing wakeup. [20315.336811] Restarting tasks ... done. [20315.500805] video LNXVIDEO:00: Restoring backlight state [20315.526326] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [20316.773053] e1000e 0000:00:19.0: PME# enabled [20316.924075] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf8200000-0xf821ffff] (PCI address [0xf8200000-0xf821ffff]) [20316.924093] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf8225000-0xf8225fff] (PCI address [0xf8225000-0xf8225fff]) [20316.924109] e1000e 0000:00:19.0: BAR 2: set to [io 0x1840-0x185f] (PCI address [0x1840-0x185f]) [20316.924144] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [20316.924194] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [20316.924292] e1000e 0000:00:19.0: PME# disabled [20317.283880] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [20317.336206] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [20317.336780] ADDRCONF(NETDEV_UP): eth0: link is not ready [20317.357247] ADDRCONF(NETDEV_UP): wlan0: link is not ready [20317.357258] batman_adv: bat0: Interface activated: wlan0 [20318.580701] e1000e 0000:00:19.0: PME# enabled [20324.572061] wlan0: authenticate with 94:44:52:0a:32:72 (try 1) [20324.573521] wlan0: authenticated [20324.574645] wlan0: associate with 94:44:52:0a:32:72 (try 1) [20324.576914] wlan0: RX AssocResp from 94:44:52:0a:32:72 (capab=0x411 status=0 aid=1) [20324.576924] wlan0: associated [20324.578151] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [20335.472055] wlan0: no IPv6 routers present [21846.408043] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf8200000-0xf821ffff] (PCI address [0xf8200000-0xf821ffff]) [21846.408053] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf8225000-0xf8225fff] (PCI address [0xf8225000-0xf8225fff]) [21846.408062] e1000e 0000:00:19.0: BAR 2: set to [io 0x1840-0x185f] (PCI address [0x1840-0x185f]) [21846.408084] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [21846.408114] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [21846.408155] e1000e 0000:00:19.0: PME# disabled [21846.408256] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [21846.762153] e1000e 0000:00:19.0: PME# enabled [21846.986706] wlan0: deauthenticating from 94:44:52:0a:32:72 by local choice (reason=3) [21847.036326] cfg80211: All devices are disconnected, going to restore regulatory settings [21847.036338] cfg80211: Restoring regulatory settings [21847.036348] cfg80211: Calling CRDA to update world regulatory domain [21847.051826] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [21847.051831] cfg80211: World regulatory domain updated: [21847.051834] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [21847.051839] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21847.051843] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21847.051847] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21847.051851] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21847.051855] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21847.092643] batman_adv: bat0: Interface deactivated: wlan0 [21847.516097] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf8200000-0xf821ffff] (PCI address [0xf8200000-0xf821ffff]) [21847.516115] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf8225000-0xf8225fff] (PCI address [0xf8225000-0xf8225fff]) [21847.516130] e1000e 0000:00:19.0: BAR 2: set to [io 0x1840-0x185f] (PCI address [0x1840-0x185f]) [21847.516161] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [21847.516206] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [21847.516295] e1000e 0000:00:19.0: PME# disabled [21848.340091] PM: Syncing filesystems ... done. [21848.377232] PM: Preparing system for mem sleep [21848.512178] Freezing user space processes ... (elapsed 0.01 seconds) done. [21848.528079] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [21848.544070] PM: Entering mem sleep [21848.544105] Suspending console(s) (use no_console_suspend to debug) [21848.544871] sd 0:0:0:0: [sda] Synchronizing SCSI cache [21848.545294] sd 0:0:0:0: [sda] Stopping disk [21848.612332] serial 00:0a: disabled [21848.614500] sdhci-pci 0000:05:00.2: PCI INT C disabled [21848.614574] uhci_hcd 0000:00:1d.1: PCI INT B disabled [21848.614592] uhci_hcd 0000:00:1d.0: PCI INT A disabled [21848.614609] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [21848.614619] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [21848.614634] ehci_hcd 0000:00:1a.7: PCI INT C disabled [21848.614655] uhci_hcd 0000:00:1a.1: PCI INT B disabled [21848.614671] uhci_hcd 0000:00:1a.0: PCI INT A disabled [21848.615153] ata_piix 0000:00:1f.1: PCI INT C disabled [21848.617234] e1000e 0000:00:19.0: PME# enabled [21848.617245] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [21848.620102] ACPI handle has no context! [21848.628066] i915 0000:00:02.0: power state changed by ACPI to D3 [21848.628085] ehci_hcd 0000:00:1d.7: PCI INT D disabled [21848.716421] snd_hda_intel 0000:00:1b.0: PCI INT B disabled [21848.732080] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 117.461 msecs [21848.819352] PM: suspend of drv:sd dev:0:0:0:0 complete after 274.486 msecs [21848.819384] PM: suspend of drv:scsi dev:target0:0:0 complete after 274.448 msecs [21848.819416] PM: suspend of drv:scsi dev:host0 complete after 255.562 msecs [21848.832088] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 219.307 msecs [21848.832117] PM: suspend of drv: dev:pci0000:00 complete after 214.883 msecs [21848.832124] PM: suspend of devices complete after 287.756 msecs [21848.832128] PM: suspend devices took 0.288 seconds [21848.848436] ehci_hcd 0000:00:1d.7: PME# enabled [21848.848444] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI [21848.864087] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [21848.864197] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI [21848.904095] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [21848.904102] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D2 [21848.904448] ehci_hcd 0000:00:1a.7: PME# enabled [21848.904455] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI [21848.920091] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [21848.920203] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI [21848.920209] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D2 [21848.920306] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [21848.920468] PM: late suspend of devices complete after 88.338 msecs [21848.920954] ACPI: Preparing to enter system sleep state S3 [21849.092106] PM: Saving platform NVS memory [21849.092434] Disabling non-boot CPUs ... [21849.196084] CPU 1 is now offline [21849.196577] Extended CMOS year: 2000 [21849.196577] ACPI: Low-level resume complete [21849.196577] PM: Restoring platform NVS memory [21849.196577] Extended CMOS year: 2000 [21849.196577] Enabling non-boot CPUs ... [21849.196577] Booting Node 0 Processor 1 APIC 0x1 [21849.196577] smpboot cpu 1: start_ip = 99000 [21849.094081] Initializing CPU#1 [21849.094081] Calibrating delay loop (skipped) already calibrated this CPU [21849.208405] NMI watchdog enabled, takes one hw-pmu counter. [21849.228215] CPU1 is up [21849.230927] ACPI: Waking up from system sleep state S3 [21849.724348] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [21849.724383] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [21849.724536] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [21849.724574] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [21849.724586] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [21849.724589] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [21849.724638] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [21849.724675] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI [21849.724679] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [21849.724683] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [21849.724749] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [21849.724773] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI [21849.724784] ehci_hcd 0000:00:1a.7: PME# disabled [21849.724788] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [21849.724796] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [21849.724881] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [21849.724995] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [21849.725140] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [21849.725219] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [21849.725222] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [21849.725275] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [21849.764106] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [21849.764112] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [21849.764116] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [21849.764173] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [21849.764215] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI [21849.764285] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [21849.764325] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI [21849.764333] ehci_hcd 0000:00:1d.7: PME# disabled [21849.764337] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [21849.764345] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [21849.764412] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007) [21849.764647] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [21849.780098] firewire_ohci 0000:05:00.1: BAR 0: set to [mem 0xd7efe800-0xd7efefff] (PCI address [0xd7efe800-0xd7efefff]) [21849.780140] firewire_ohci 0000:05:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802000) [21849.780150] firewire_ohci 0000:05:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [21849.796096] sdhci-pci 0000:05:00.2: BAR 0: set to [mem 0xd7efe400-0xd7efe4ff] (PCI address [0xd7efe400-0xd7efe4ff]) [21849.796144] sdhci-pci 0000:05:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804000) [21849.796154] sdhci-pci 0000:05:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [21849.796919] PM: early resume of devices complete after 72.794 msecs [21849.797035] i915 0000:00:02.0: power state changed by ACPI to D0 [21849.797042] i915 0000:00:02.0: power state changed by ACPI to D0 [21849.797049] i915 0000:00:02.0: setting latency timer to 64 [21849.797081] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [21849.799999] e1000e 0000:00:19.0: PME# disabled [21849.802095] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [21849.812552] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [21849.812564] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [21849.812602] usb usb3: root hub lost power or was reset [21849.812623] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [21849.812627] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [21849.812634] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [21849.812642] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [21849.812671] usb usb4: root hub lost power or was reset [21849.812688] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [21849.812694] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [21849.812702] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [21849.812710] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [21849.812749] snd_hda_intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [21849.812758] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [21849.812813] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [21849.812873] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [21849.812888] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [21849.812897] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [21849.812902] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [21849.812908] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [21849.812916] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [21849.812944] usb usb5: root hub lost power or was reset [21849.812962] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [21849.812971] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [21849.812999] usb usb6: root hub lost power or was reset [21849.813016] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [21849.813021] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [21849.813030] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [21849.813038] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [21849.813075] pci 0000:00:1e.0: setting latency timer to 64 [21849.813093] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [21849.813100] ata_piix 0000:00:1f.1: setting latency timer to 64 [21849.813129] ahci 0000:00:1f.2: setting latency timer to 64 [21849.813200] sdhci-pci 0000:05:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [21849.813204] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [21849.815809] sd 0:0:0:0: [sda] Starting disk [21849.816769] ata5: port disabled--ignoring [21849.831840] serial 00:0a: activated [21849.871867] Extended CMOS year: 2000 [21849.876146] firewire_core: skipped bus generations, destroying all nodes [21849.904890] PM: resume of drv:i915 dev:0000:00:02.0 complete after 107.869 msecs [21849.932096] PM: resume of drv:hub dev:4-0:1.0 complete after 116.727 msecs [21849.932108] PM: resume of drv: dev:ep_00 complete after 116.608 msecs [21849.932117] PM: resume of drv: dev:ep_81 complete after 116.730 msecs [21849.932131] PM: resume of drv:hub dev:3-0:1.0 complete after 117.409 msecs [21849.932145] PM: resume of drv: dev:ep_00 complete after 116.359 msecs [21849.932150] PM: resume of drv: dev:ep_81 complete after 117.402 msecs [21849.932155] PM: resume of drv:hub dev:6-0:1.0 complete after 116.470 msecs [21849.932176] PM: resume of drv: dev:ep_00 complete after 116.860 msecs [21849.932194] PM: resume of drv: dev:ep_81 complete after 116.432 msecs [21850.036065] PM: resume of drv: dev:ep_00 complete after 220.427 msecs [21850.036074] PM: resume of drv:hub dev:5-0:1.0 complete after 220.528 msecs [21850.036092] PM: resume of drv: dev:ep_81 complete after 220.478 msecs [21850.136052] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [21850.136836] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [21850.136843] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [21850.136849] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [21850.138945] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [21850.138951] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [21850.138958] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [21850.139599] ata1.00: configured for UDMA/133 [21850.148066] usb 5-1: reset full-speed USB device number 2 using uhci_hcd [21850.156301] PM: resume of drv:sd dev:0:0:0:0 complete after 340.488 msecs [21850.156313] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 340.429 msecs [21850.156322] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 284.401 msecs [21850.157925] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 360.850 msecs [21850.376074] firewire_core: rediscovered device fw0 [21850.512082] PM: resume of drv:hub dev:5-1:1.0 complete after 696.152 msecs [21850.512089] PM: resume of drv: dev:ep_00 complete after 695.936 msecs [21850.512102] PM: resume of drv: dev:ep_81 complete after 695.974 msecs [21850.585576] usb 5-1.3: reset full-speed USB device number 5 using uhci_hcd [21850.700564] btusb 5-1.3:1.0: no reset_resume for driver btusb? [21850.700568] btusb 5-1.3:1.1: no reset_resume for driver btusb? [21850.757568] usb 5-1.2: reset full-speed USB device number 4 using uhci_hcd [21850.871573] PM: resume of drv: dev:ep_00 complete after 1055.191 msecs [21850.871583] PM: resume of drv:usbhid dev:5-1.2:1.0 complete after 1055.245 msecs [21850.871609] PM: resume of drv: dev:ep_81 complete after 1055.243 msecs [21850.929574] usb 5-1.1: reset full-speed USB device number 3 using uhci_hcd [21850.952228] PM: resume of drv:usb dev:5-1.3:1.0 complete after 1135.781 msecs [21850.952233] PM: resume of drv:usb dev:5-1.3:1.2 complete after 1135.632 msecs [21850.952242] PM: resume of drv: dev:ep_81 complete after 1135.771 msecs [21850.952246] PM: resume of drv:usb dev:5-1.3:1.1 complete after 1135.709 msecs [21850.952250] PM: resume of drv: dev:ep_82 complete after 1135.757 msecs [21850.952256] PM: resume of drv: dev:ep_00 complete after 1135.572 msecs [21850.952260] PM: resume of drv: dev:ep_02 complete after 1135.743 msecs [21850.952264] PM: resume of drv:usb dev:5-1.3:1.3 complete after 1135.602 msecs [21850.952276] PM: resume of drv: dev:ep_03 complete after 1135.697 msecs [21850.952279] PM: resume of drv: dev:ep_84 complete after 1135.655 msecs [21850.952283] PM: resume of drv: dev:ep_83 complete after 1135.727 msecs [21850.952287] PM: resume of drv: dev:ep_04 complete after 1135.645 msecs [21851.042582] PM: resume of drv: dev:ep_00 complete after 1226.291 msecs [21851.042592] PM: resume of drv:usbhid dev:5-1.1:1.0 complete after 1226.401 msecs [21851.042613] PM: resume of drv:generic-usb dev:0003:0A5C:4502.0001 complete after 884.550 msecs [21851.042620] PM: resume of drv: dev:ep_81 complete after 1226.407 msecs [21851.184164] PM: resume of devices complete after 1387.193 msecs [21851.184578] PM: resume devices took 1.388 seconds [21851.184622] PM: Finishing wakeup. [21851.184625] Restarting tasks ... done. [21851.302015] video LNXVIDEO:00: Restoring backlight state [21851.325713] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [21852.596922] e1000e 0000:00:19.0: PME# enabled [21852.724046] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf8200000-0xf821ffff] (PCI address [0xf8200000-0xf821ffff]) [21852.724057] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf8225000-0xf8225fff] (PCI address [0xf8225000-0xf8225fff]) [21852.724065] e1000e 0000:00:19.0: BAR 2: set to [io 0x1840-0x185f] (PCI address [0x1840-0x185f]) [21852.724087] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [21852.724117] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [21852.724178] e1000e 0000:00:19.0: PME# disabled [21853.106127] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [21853.160182] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [21853.160503] ADDRCONF(NETDEV_UP): eth0: link is not ready [21853.172116] ADDRCONF(NETDEV_UP): wlan0: link is not ready [21853.172128] batman_adv: bat0: Interface activated: wlan0 [21854.400885] e1000e 0000:00:19.0: PME# enabled [21860.379921] wlan0: authenticate with 94:44:52:0a:32:72 (try 1) [21860.381351] wlan0: authenticated [21860.381997] wlan0: associate with 94:44:52:0a:32:72 (try 1) [21860.385221] wlan0: RX AssocResp from 94:44:52:0a:32:72 (capab=0x411 status=0 aid=2) [21860.385231] wlan0: associated [21860.386537] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [21871.616075] wlan0: no IPv6 routers present [21918.612097] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf8200000-0xf821ffff] (PCI address [0xf8200000-0xf821ffff]) [21918.612108] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf8225000-0xf8225fff] (PCI address [0xf8225000-0xf8225fff]) [21918.612117] e1000e 0000:00:19.0: BAR 2: set to [io 0x1840-0x185f] (PCI address [0x1840-0x185f]) [21918.612139] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [21918.612169] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [21918.612209] e1000e 0000:00:19.0: PME# disabled [21918.612308] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [25279.687763] audit_printk_skb: 39 callbacks suppressed [25279.687768] type=1400 audit(1334351172.227:24): apparmor="DENIED" operation="open" parent=1 profile="/usr/sbin/cupsd" name="/home/.ecryptfs/matthew/.ecryptfs/Private.mnt" pid=679 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=1000 [25280.494123] type=1400 audit(1334351173.035:25): apparmor="DENIED" operation="open" parent=679 profile="/usr/sbin/cupsd" name="/home/.ecryptfs/matthew/.ecryptfs/wrapped-passphrase" pid=13363 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000 [25477.288364] type=1400 audit(1334351369.832:26): apparmor="DENIED" operation="open" parent=1 profile="/usr/sbin/cupsd" name="/home/.ecryptfs/matthew/.ecryptfs/Private.mnt" pid=679 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=1000 [25478.087648] type=1400 audit(1334351370.628:27): apparmor="DENIED" operation="open" parent=679 profile="/usr/sbin/cupsd" name="/home/.ecryptfs/matthew/.ecryptfs/wrapped-passphrase" pid=13516 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000 [25504.787097] type=1400 audit(1334351397.329:28): apparmor="DENIED" operation="open" parent=1 profile="/usr/sbin/cupsd" name="/home/.ecryptfs/matthew/.ecryptfs/Private.mnt" pid=679 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=1000 [25505.590436] type=1400 audit(1334351398.133:29): apparmor="DENIED" operation="open" parent=679 profile="/usr/sbin/cupsd" name="/home/.ecryptfs/matthew/.ecryptfs/wrapped-passphrase" pid=13537 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000 [26871.063819] wlan0: deauthenticating from 94:44:52:0a:32:72 by local choice (reason=3) [26871.117302] cfg80211: All devices are disconnected, going to restore regulatory settings [26871.117311] cfg80211: Restoring regulatory settings [26871.117319] cfg80211: Calling CRDA to update world regulatory domain [26871.123519] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [26871.123525] cfg80211: World regulatory domain updated: [26871.123528] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [26871.123532] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [26871.123537] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [26871.123541] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [26871.123544] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [26871.123548] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [26871.142027] batman_adv: bat0: Interface deactivated: wlan0 [26872.520223] PM: Syncing filesystems ... done. [26872.561663] PM: Preparing system for mem sleep [26872.752170] Freezing user space processes ... (elapsed 0.01 seconds) done. [26872.768082] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [26872.784056] PM: Entering mem sleep [26872.784095] Suspending console(s) (use no_console_suspend to debug) [26872.784807] sd 0:0:0:0: [sda] Synchronizing SCSI cache [26872.784928] sd 0:0:0:0: [sda] Stopping disk [26872.848322] serial 00:0a: disabled [26872.850483] sdhci-pci 0000:05:00.2: PCI INT C disabled [26872.850593] uhci_hcd 0000:00:1d.1: PCI INT B disabled [26872.850617] uhci_hcd 0000:00:1d.0: PCI INT A disabled [26872.850620] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [26872.850635] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [26872.850649] ehci_hcd 0000:00:1a.7: PCI INT C disabled [26872.850664] uhci_hcd 0000:00:1a.1: PCI INT B disabled [26872.850680] uhci_hcd 0000:00:1a.0: PCI INT A disabled [26872.851533] ata_piix 0000:00:1f.1: PCI INT C disabled [26872.853231] e1000e 0000:00:19.0: PME# enabled [26872.853240] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [26872.856106] ACPI handle has no context! [26872.864103] i915 0000:00:02.0: power state changed by ACPI to D3 [26872.868082] ehci_hcd 0000:00:1d.7: PCI INT D disabled [26872.952397] snd_hda_intel 0000:00:1b.0: PCI INT B disabled [26872.968081] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 117.451 msecs [26873.062897] PM: suspend of drv:sd dev:0:0:0:0 complete after 278.097 msecs [26873.062930] PM: suspend of drv:scsi dev:target0:0:0 complete after 278.061 msecs [26873.062962] PM: suspend of drv:scsi dev:host0 complete after 261.891 msecs [26873.076087] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 227.324 msecs [26873.076116] PM: suspend of drv: dev:pci0000:00 complete after 224.565 msecs [26873.076152] PM: suspend of devices complete after 291.794 msecs [26873.076155] PM: suspend devices took 0.292 seconds [26873.092431] ehci_hcd 0000:00:1d.7: PME# enabled [26873.092439] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI [26873.108107] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [26873.108217] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI [26873.148107] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [26873.148114] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D2 [26873.148457] ehci_hcd 0000:00:1a.7: PME# enabled [26873.148464] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI [26873.164105] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [26873.164217] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI [26873.164228] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D2 [26873.164323] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [26873.164486] PM: late suspend of devices complete after 88.327 msecs [26873.164965] ACPI: Preparing to enter system sleep state S3 [26873.336109] PM: Saving platform NVS memory [26873.336442] Disabling non-boot CPUs ... [26873.440083] CPU 1 is now offline [26873.440619] Extended CMOS year: 2000 [26873.440619] ACPI: Low-level resume complete [26873.440619] PM: Restoring platform NVS memory [26873.440619] Extended CMOS year: 2000 [26873.440619] Enabling non-boot CPUs ... [26873.440619] Booting Node 0 Processor 1 APIC 0x1 [26873.440619] smpboot cpu 1: start_ip = 99000 [26873.338093] Initializing CPU#1 [26873.338093] Calibrating delay loop (skipped) already calibrated this CPU [26873.452352] NMI watchdog enabled, takes one hw-pmu counter. [26873.516349] CPU1 is up [26873.519076] ACPI: Waking up from system sleep state S3 [26874.012336] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [26874.012371] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [26874.012514] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [26874.012552] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [26874.012563] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [26874.012567] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [26874.012620] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [26874.012657] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI [26874.012661] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [26874.012664] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [26874.012724] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [26874.012754] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI [26874.012765] ehci_hcd 0000:00:1a.7: PME# disabled [26874.012769] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [26874.012777] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [26874.012860] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [26874.012973] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [26874.013115] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [26874.013194] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [26874.013198] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [26874.013246] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [26874.052103] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [26874.052109] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [26874.052113] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [26874.052174] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [26874.052211] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI [26874.052283] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [26874.052314] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI [26874.052323] ehci_hcd 0000:00:1d.7: PME# disabled [26874.052327] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [26874.052334] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [26874.052403] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007) [26874.052630] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [26874.068098] firewire_ohci 0000:05:00.1: BAR 0: set to [mem 0xd7efe800-0xd7efefff] (PCI address [0xd7efe800-0xd7efefff]) [26874.068140] firewire_ohci 0000:05:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802000) [26874.068151] firewire_ohci 0000:05:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [26874.084096] sdhci-pci 0000:05:00.2: BAR 0: set to [mem 0xd7efe400-0xd7efe4ff] (PCI address [0xd7efe400-0xd7efe4ff]) [26874.084143] sdhci-pci 0000:05:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804000) [26874.084153] sdhci-pci 0000:05:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [26874.084914] PM: early resume of devices complete after 72.794 msecs [26874.085031] i915 0000:00:02.0: power state changed by ACPI to D0 [26874.085037] i915 0000:00:02.0: power state changed by ACPI to D0 [26874.085044] i915 0000:00:02.0: setting latency timer to 64 [26874.085078] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [26874.088001] e1000e 0000:00:19.0: PME# disabled [26874.090076] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [26874.100535] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [26874.100547] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [26874.100584] usb usb3: root hub lost power or was reset [26874.100606] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [26874.100610] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [26874.100616] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [26874.100625] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [26874.100653] usb usb4: root hub lost power or was reset [26874.100670] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [26874.100676] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [26874.100684] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [26874.100692] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [26874.100731] snd_hda_intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [26874.100739] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [26874.100795] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [26874.100855] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [26874.100870] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [26874.100879] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [26874.100883] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [26874.100889] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [26874.100898] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [26874.100926] usb usb5: root hub lost power or was reset [26874.100943] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [26874.100951] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [26874.100980] usb usb6: root hub lost power or was reset [26874.100996] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [26874.101002] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [26874.101010] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [26874.101018] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [26874.101055] pci 0000:00:1e.0: setting latency timer to 64 [26874.101074] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [26874.101081] ata_piix 0000:00:1f.1: setting latency timer to 64 [26874.101108] ahci 0000:00:1f.2: setting latency timer to 64 [26874.101179] sdhci-pci 0000:05:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [26874.101183] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [26874.103327] ata5: port disabled--ignoring [26874.103740] sd 0:0:0:0: [sda] Starting disk [26874.119748] serial 00:0a: activated [26874.155990] Extended CMOS year: 2000 [26874.164149] firewire_core: skipped bus generations, destroying all nodes [26874.192812] PM: resume of drv:i915 dev:0000:00:02.0 complete after 107.791 msecs [26874.220090] PM: resume of drv:hub dev:6-0:1.0 complete after 116.415 msecs [26874.220100] PM: resume of drv: dev:ep_00 complete after 116.389 msecs [26874.220106] PM: resume of drv:hub dev:4-0:1.0 complete after 116.756 msecs [26874.220110] PM: resume of drv: dev:ep_81 complete after 116.418 msecs [26874.220116] PM: resume of drv: dev:ep_00 complete after 116.635 msecs [26874.220124] PM: resume of drv: dev:ep_81 complete after 116.752 msecs [26874.220172] PM: resume of drv: dev:ep_00 complete after 117.465 msecs [26874.220180] PM: resume of drv:hub dev:3-0:1.0 complete after 117.560 msecs [26874.220210] PM: resume of drv: dev:ep_81 complete after 117.585 msecs [26874.324061] PM: resume of drv: dev:ep_00 complete after 220.443 msecs [26874.324080] PM: resume of drv:hub dev:5-0:1.0 complete after 220.550 msecs [26874.324096] PM: resume of drv: dev:ep_81 complete after 220.548 msecs [26874.424068] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [26874.424677] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [26874.424684] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [26874.424691] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [26874.426198] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [26874.426204] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [26874.426210] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [26874.426762] ata1.00: configured for UDMA/133 [26874.436245] usb 5-1: reset full-speed USB device number 2 using uhci_hcd [26874.440300] PM: resume of drv:sd dev:0:0:0:0 complete after 336.558 msecs [26874.440312] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 336.469 msecs [26874.440327] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 284.272 msecs [26874.441996] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 356.924 msecs [26874.664093] firewire_core: rediscovered device fw0 [26874.800090] PM: resume of drv: dev:ep_00 complete after 696.128 msecs [26874.800095] PM: resume of drv:hub dev:5-1:1.0 complete after 696.194 msecs [26874.800112] PM: resume of drv: dev:ep_81 complete after 696.198 msecs [26874.873559] usb 5-1.2: reset full-speed USB device number 4 using uhci_hcd [26874.987554] PM: resume of drv: dev:ep_00 complete after 883.282 msecs [26874.987565] PM: resume of drv:usbhid dev:5-1.2:1.0 complete after 883.333 msecs [26874.987592] PM: resume of drv: dev:ep_81 complete after 883.334 msecs [26875.045552] usb 5-1.1: reset full-speed USB device number 3 using uhci_hcd [26875.159557] PM: resume of drv: dev:ep_00 complete after 1055.368 msecs [26875.159567] PM: resume of drv:usbhid dev:5-1.1:1.0 complete after 1055.569 msecs [26875.159582] PM: resume of drv:generic-usb dev:0003:0A5C:4502.0001 complete after 717.430 msecs [26875.159594] PM: resume of drv: dev:ep_81 complete after 1055.423 msecs [26875.217560] usb 5-1.3: reset full-speed USB device number 5 using uhci_hcd [26875.332551] btusb 5-1.3:1.0: no reset_resume for driver btusb? [26875.332556] btusb 5-1.3:1.1: no reset_resume for driver btusb? [26875.584234] PM: resume of drv:usb dev:5-1.3:1.0 complete after 1479.899 msecs [26875.584248] PM: resume of drv: dev:ep_00 complete after 1479.597 msecs [26875.584256] PM: resume of drv:usb dev:5-1.3:1.3 complete after 1479.648 msecs [26875.584264] PM: resume of drv: dev:ep_81 complete after 1479.909 msecs [26875.584268] PM: resume of drv:usb dev:5-1.3:1.2 complete after 1479.724 msecs [26875.584273] PM: resume of drv:bluetooth dev:hci0 complete after 284.126 msecs [26875.584278] PM: resume of drv:usb dev:5-1.3:1.1 complete after 1479.807 msecs [26875.584301] PM: resume of drv: dev:ep_03 complete after 1479.781 msecs [26875.584305] PM: resume of drv: dev:ep_82 complete after 1479.926 msecs [26875.584309] PM: resume of drv: dev:ep_83 complete after 1479.815 msecs [26875.584312] PM: resume of drv: dev:ep_02 complete after 1479.916 msecs [26875.584317] PM: resume of drv: dev:ep_04 complete after 1479.733 msecs [26875.584320] PM: resume of drv: dev:ep_84 complete after 1479.759 msecs [26875.584335] PM: resume of devices complete after 1499.369 msecs [26875.584720] PM: resume devices took 1.500 seconds [26875.584764] PM: Finishing wakeup. [26875.584767] Restarting tasks ... done. [26875.698407] video LNXVIDEO:00: Restoring backlight state [26875.738928] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [26877.572289] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [26877.628167] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [26877.628573] ADDRCONF(NETDEV_UP): eth0: link is not ready [26877.640319] ADDRCONF(NETDEV_UP): wlan0: link is not ready [26877.640330] batman_adv: bat0: Interface activated: wlan0 [26884.848748] wlan0: authenticate with 94:44:52:0a:32:72 (try 1) [26884.850220] wlan0: authenticated [26884.850951] wlan0: associate with 94:44:52:0a:32:72 (try 1) [26884.853203] wlan0: RX AssocResp from 94:44:52:0a:32:72 (capab=0x411 status=0 aid=2) [26884.853209] wlan0: associated [26884.853936] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [26895.872040] wlan0: no IPv6 routers present [27767.169027] type=1400 audit(1334364597.252:30): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=15580 comm="apparmor_parser" [27767.169759] type=1400 audit(1334364597.252:31): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=15580 comm="apparmor_parser" [27808.781356] type=1400 audit(1334364638.864:32): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=15651 comm="apparmor_parser" [27808.782230] type=1400 audit(1334364638.864:33): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=15651 comm="apparmor_parser" [28115.804067] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [28115.804080] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state [28115.805569] [drm:i915_wait_request] *ERROR* i915_wait_request returns -11 (awaiting 504010 at 504009, next 504018) [28115.805807] [drm:init_ring_common] *ERROR* render ring initialization failed ctl 00000000 head 00000000 tail 00000000 start 00000000 [28115.806438] [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, -vsync) [28115.806598] ------------[ cut here ]------------ [28115.806667] WARNING: at /build/buildd/linux-3.2.0/drivers/gpu/drm/i915/intel_display.c:793 intel_enable_pipe+0x144/0x150 [i915]() [28115.806676] Hardware name: 7762WU2 [28115.806681] PLL state assertion failure (expected on, current off) [28115.806686] Modules linked in: batman_adv(O) pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) dm_crypt arc4 snd_hda_codec_analog btusb pcmcia ath5k ath mac80211 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event yenta_socket psmouse pcmcia_rsrc snd_seq pcmcia_core serio_raw cfg80211 snd_timer snd_seq_device thinkpad_acpi nvram snd tpm_tis bnep rfcomm soundcore mac_hid snd_page_alloc bluetooth parport_pc ppdev binfmt_misc lp parport usbhid hid firewire_ohci sdhci_pci sdhci firewire_core crc_itu_t i915 drm_kms_helper drm e1000e i2c_algo_bit video [28115.806812] Pid: 15686, comm: kworker/u:2 Tainted: G O 3.2.0-23-generic-pae #36-Ubuntu [28115.806819] Call Trace: [28115.806839] [] warn_slowpath_common+0x72/0xa0 [28115.806884] [] ? intel_enable_pipe+0x144/0x150 [i915] [28115.806926] [] ? intel_enable_pipe+0x144/0x150 [i915] [28115.806938] [] warn_slowpath_fmt+0x33/0x40 [28115.806981] [] intel_enable_pipe+0x144/0x150 [i915] [28115.807030] [] i9xx_crtc_mode_set+0x688/0xc60 [i915] [28115.807066] [] ? vblank_disable_and_save+0x16c/0x190 [drm] [28115.807107] [] ? i965_update_wm+0x189/0x220 [i915] [28115.807148] [] intel_crtc_mode_set+0x5c/0x90 [i915] [28115.807170] [] drm_crtc_helper_set_mode+0x2a2/0x470 [drm_kms_helper] [28115.807196] [] drm_helper_resume_force_mode+0x6d/0x140 [drm_kms_helper] [28115.807229] [] i915_reset+0x211/0x2d0 [i915] [28115.807262] [] i915_error_work_func+0xae/0xf0 [i915] [28115.807284] [] process_one_work+0x101/0x3a0 [28115.807297] [] ? apic_timer_interrupt+0x31/0x38 [28115.807330] [] ? i915_driver_irq_postinstall+0x170/0x170 [i915] [28115.807339] [] worker_thread+0x124/0x2d0 [28115.807348] [] ? manage_workers.isra.27+0x110/0x110 [28115.807358] [] kthread+0x6d/0x80 [28115.807367] [] ? flush_kthread_worker+0x80/0x80 [28115.807379] [] kernel_thread_helper+0x6/0x10 [28115.807385] ---[ end trace a6d75ec214433a99 ]--- [28115.916044] ------------[ cut here ]------------ [28115.916084] WARNING: at /build/buildd/linux-3.2.0/drivers/gpu/drm/i915/intel_display.c:930 assert_pipe+0x75/0x80 [i915]() [28115.916088] Hardware name: 7762WU2 [28115.916091] pipe B assertion failure (expected on, current off) [28115.916094] Modules linked in: batman_adv(O) pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) dm_crypt arc4 snd_hda_codec_analog btusb pcmcia ath5k ath mac80211 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event yenta_socket psmouse pcmcia_rsrc snd_seq pcmcia_core serio_raw cfg80211 snd_timer snd_seq_device thinkpad_acpi nvram snd tpm_tis bnep rfcomm soundcore mac_hid snd_page_alloc bluetooth parport_pc ppdev binfmt_misc lp parport usbhid hid firewire_ohci sdhci_pci sdhci firewire_core crc_itu_t i915 drm_kms_helper drm e1000e i2c_algo_bit video [28115.916158] Pid: 15686, comm: kworker/u:2 Tainted: G W O 3.2.0-23-generic-pae #36-Ubuntu [28115.916161] Call Trace: [28115.916172] [] warn_slowpath_common+0x72/0xa0 [28115.916194] [] ? assert_pipe+0x75/0x80 [i915] [28115.916214] [] ? assert_pipe+0x75/0x80 [i915] [28115.916219] [] warn_slowpath_fmt+0x33/0x40 [28115.916241] [] assert_pipe+0x75/0x80 [i915] [28115.916265] [] intel_enable_plane+0x26/0x80 [i915] [28115.916288] [] i9xx_crtc_mode_set+0x6b7/0xc60 [i915] [28115.916307] [] ? vblank_disable_and_save+0x16c/0x190 [drm] [28115.916327] [] ? i965_update_wm+0x189/0x220 [i915] [28115.916348] [] intel_crtc_mode_set+0x5c/0x90 [i915] [28115.916360] [] drm_crtc_helper_set_mode+0x2a2/0x470 [drm_kms_helper] [28115.916373] [] drm_helper_resume_force_mode+0x6d/0x140 [drm_kms_helper] [28115.916389] [] i915_reset+0x211/0x2d0 [i915] [28115.916406] [] i915_error_work_func+0xae/0xf0 [i915] [28115.916418] [] process_one_work+0x101/0x3a0 [28115.916425] [] ? apic_timer_interrupt+0x31/0x38 [28115.916441] [] ? i915_driver_irq_postinstall+0x170/0x170 [i915] [28115.916446] [] worker_thread+0x124/0x2d0 [28115.916451] [] ? manage_workers.isra.27+0x110/0x110 [28115.916456] [] kthread+0x6d/0x80 [28115.916460] [] ? flush_kthread_worker+0x80/0x80 [28115.916466] [] kernel_thread_helper+0x6/0x10 [28115.916469] ---[ end trace a6d75ec214433a9a ]--- [28116.028489] ------------[ cut here ]------------ [28116.028526] WARNING: at /build/buildd/linux-3.2.0/drivers/gpu/drm/i915/intel_display.c:793 intel_enable_pipe+0x144/0x150 [i915]() [28116.028531] Hardware name: 7762WU2 [28116.028533] PLL state assertion failure (expected on, current off) [28116.028536] Modules linked in: batman_adv(O) pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) dm_crypt arc4 snd_hda_codec_analog btusb pcmcia ath5k ath mac80211 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event yenta_socket psmouse pcmcia_rsrc snd_seq pcmcia_core serio_raw cfg80211 snd_timer snd_seq_device thinkpad_acpi nvram snd tpm_tis bnep rfcomm soundcore mac_hid snd_page_alloc bluetooth parport_pc ppdev binfmt_misc lp parport usbhid hid firewire_ohci sdhci_pci sdhci firewire_core crc_itu_t i915 drm_kms_helper drm e1000e i2c_algo_bit video [28116.028600] Pid: 15686, comm: kworker/u:2 Tainted: G W O 3.2.0-23-generic-pae #36-Ubuntu [28116.028603] Call Trace: [28116.028614] [] warn_slowpath_common+0x72/0xa0 [28116.028636] [] ? intel_enable_pipe+0x144/0x150 [i915] [28116.028657] [] ? intel_enable_pipe+0x144/0x150 [i915] [28116.028663] [] warn_slowpath_fmt+0x33/0x40 [28116.028684] [] intel_enable_pipe+0x144/0x150 [i915] [28116.028708] [] i9xx_crtc_enable+0x6a/0xa0 [i915] [28116.028730] [] i9xx_crtc_commit+0xd/0x10 [i915] [28116.028739] [] drm_crtc_helper_set_mode+0x2f8/0x470 [drm_kms_helper] [28116.028754] [] drm_helper_resume_force_mode+0x6d/0x140 [drm_kms_helper] [28116.028770] [] i915_reset+0x211/0x2d0 [i915] [28116.028787] [] i915_error_work_func+0xae/0xf0 [i915] [28116.028798] [] process_one_work+0x101/0x3a0 [28116.028805] [] ? apic_timer_interrupt+0x31/0x38 [28116.028822] [] ? i915_driver_irq_postinstall+0x170/0x170 [i915] [28116.028827] [] worker_thread+0x124/0x2d0 [28116.028831] [] ? manage_workers.isra.27+0x110/0x110 [28116.028836] [] kthread+0x6d/0x80 [28116.028840] [] ? flush_kthread_worker+0x80/0x80 [28116.028846] [] kernel_thread_helper+0x6/0x10 [28116.028849] ---[ end trace a6d75ec214433a9b ]--- [28116.084051] ------------[ cut here ]------------ [28116.084086] WARNING: at /build/buildd/linux-3.2.0/drivers/gpu/drm/i915/intel_display.c:930 assert_pipe+0x75/0x80 [i915]() [28116.084090] Hardware name: 7762WU2 [28116.084093] pipe B assertion failure (expected on, current off) [28116.084096] Modules linked in: batman_adv(O) pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) dm_crypt arc4 snd_hda_codec_analog btusb pcmcia ath5k ath mac80211 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event yenta_socket psmouse pcmcia_rsrc snd_seq pcmcia_core serio_raw cfg80211 snd_timer snd_seq_device thinkpad_acpi nvram snd tpm_tis bnep rfcomm soundcore mac_hid snd_page_alloc bluetooth parport_pc ppdev binfmt_misc lp parport usbhid hid firewire_ohci sdhci_pci sdhci firewire_core crc_itu_t i915 drm_kms_helper drm e1000e i2c_algo_bit video [28116.084160] Pid: 15686, comm: kworker/u:2 Tainted: G W O 3.2.0-23-generic-pae #36-Ubuntu [28116.084163] Call Trace: [28116.084172] [] warn_slowpath_common+0x72/0xa0 [28116.084194] [] ? assert_pipe+0x75/0x80 [i915] [28116.084214] [] ? assert_pipe+0x75/0x80 [i915] [28116.084220] [] warn_slowpath_fmt+0x33/0x40 [28116.084240] [] assert_pipe+0x75/0x80 [i915] [28116.084265] [] intel_enable_plane+0x26/0x80 [i915] [28116.084286] [] i9xx_crtc_enable+0x77/0xa0 [i915] [28116.084308] [] i9xx_crtc_commit+0xd/0x10 [i915] [28116.084317] [] drm_crtc_helper_set_mode+0x2f8/0x470 [drm_kms_helper] [28116.084332] [] drm_helper_resume_force_mode+0x6d/0x140 [drm_kms_helper] [28116.084349] [] i915_reset+0x211/0x2d0 [i915] [28116.084366] [] i915_error_work_func+0xae/0xf0 [i915] [28116.084377] [] process_one_work+0x101/0x3a0 [28116.084383] [] ? apic_timer_interrupt+0x31/0x38 [28116.084400] [] ? i915_driver_irq_postinstall+0x170/0x170 [i915] [28116.084404] [] worker_thread+0x124/0x2d0 [28116.084409] [] ? manage_workers.isra.27+0x110/0x110 [28116.084413] [] kthread+0x6d/0x80 [28116.084418] [] ? flush_kthread_worker+0x80/0x80 [28116.084424] [] kernel_thread_helper+0x6/0x10 [28116.084427] ---[ end trace a6d75ec214433a9c ]--- [28117.152063] [drm:intel_lvds_enable] *ERROR* timed out waiting for panel to power on [28117.416143] [drm:i915_wait_request] *ERROR* something (likely vbetool) disabled interrupts, re-enabling [28123.428063] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [28123.428115] [drm:i915_wait_request] *ERROR* i915_wait_request returns -11 (awaiting 504052 at 504009, next 504172) [28123.428642] [drm:init_ring_common] *ERROR* render ring initialization failed ctl 00000000 head 00000000 tail 00000000 start 00000000 [28123.429269] [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, -vsync) [28123.429427] ------------[ cut here ]------------ [28123.429492] WARNING: at /build/buildd/linux-3.2.0/drivers/gpu/drm/i915/intel_display.c:793 intel_enable_pipe+0x144/0x150 [i915]() [28123.429501] Hardware name: 7762WU2 [28123.429506] PLL state assertion failure (expected on, current off) [28123.429512] Modules linked in: batman_adv(O) pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) dm_crypt arc4 snd_hda_codec_analog btusb pcmcia ath5k ath mac80211 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event yenta_socket psmouse pcmcia_rsrc snd_seq pcmcia_core serio_raw cfg80211 snd_timer snd_seq_device thinkpad_acpi nvram snd tpm_tis bnep rfcomm soundcore mac_hid snd_page_alloc bluetooth parport_pc ppdev binfmt_misc lp parport usbhid hid firewire_ohci sdhci_pci sdhci firewire_core crc_itu_t i915 drm_kms_helper drm e1000e i2c_algo_bit video [28123.429639] Pid: 15686, comm: kworker/u:2 Tainted: G W O 3.2.0-23-generic-pae #36-Ubuntu [28123.429647] Call Trace: [28123.429667] [] warn_slowpath_common+0x72/0xa0 [28123.429711] [] ? intel_enable_pipe+0x144/0x150 [i915] [28123.429753] [] ? intel_enable_pipe+0x144/0x150 [i915] [28123.429765] [] warn_slowpath_fmt+0x33/0x40 [28123.429808] [] intel_enable_pipe+0x144/0x150 [i915] [28123.429857] [] i9xx_crtc_mode_set+0x688/0xc60 [i915] [28123.429893] [] ? vblank_disable_and_save+0x16c/0x190 [drm] [28123.429934] [] ? i965_update_wm+0x189/0x220 [i915] [28123.429976] [] intel_crtc_mode_set+0x5c/0x90 [i915] [28123.429997] [] drm_crtc_helper_set_mode+0x2a2/0x470 [drm_kms_helper] [28123.430023] [] drm_helper_resume_force_mode+0x6d/0x140 [drm_kms_helper] [28123.430058] [] i915_reset+0x211/0x2d0 [i915] [28123.430092] [] i915_error_work_func+0xae/0xf0 [i915] [28123.430114] [] process_one_work+0x101/0x3a0 [28123.430126] [] ? apic_timer_interrupt+0x31/0x38 [28123.430160] [] ? i915_driver_irq_postinstall+0x170/0x170 [i915] [28123.430169] [] worker_thread+0x124/0x2d0 [28123.430178] [] ? manage_workers.isra.27+0x110/0x110 [28123.430188] [] kthread+0x6d/0x80 [28123.430198] [] ? flush_kthread_worker+0x80/0x80 [28123.430209] [] kernel_thread_helper+0x6/0x10 [28123.430216] ---[ end trace a6d75ec214433a9d ]--- [28123.544032] ------------[ cut here ]------------ [28123.544071] WARNING: at /build/buildd/linux-3.2.0/drivers/gpu/drm/i915/intel_display.c:930 assert_pipe+0x75/0x80 [i915]() [28123.544075] Hardware name: 7762WU2 [28123.544078] pipe B assertion failure (expected on, current off) [28123.544081] Modules linked in: batman_adv(O) pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) dm_crypt arc4 snd_hda_codec_analog btusb pcmcia ath5k ath mac80211 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event yenta_socket psmouse pcmcia_rsrc snd_seq pcmcia_core serio_raw cfg80211 snd_timer snd_seq_device thinkpad_acpi nvram snd tpm_tis bnep rfcomm soundcore mac_hid snd_page_alloc bluetooth parport_pc ppdev binfmt_misc lp parport usbhid hid firewire_ohci sdhci_pci sdhci firewire_core crc_itu_t i915 drm_kms_helper drm e1000e i2c_algo_bit video [28123.544145] Pid: 15686, comm: kworker/u:2 Tainted: G W O 3.2.0-23-generic-pae #36-Ubuntu [28123.544149] Call Trace: [28123.544159] [] warn_slowpath_common+0x72/0xa0 [28123.544181] [] ? assert_pipe+0x75/0x80 [i915] [28123.544201] [] ? assert_pipe+0x75/0x80 [i915] [28123.544207] [] warn_slowpath_fmt+0x33/0x40 [28123.544228] [] assert_pipe+0x75/0x80 [i915] [28123.544252] [] intel_enable_plane+0x26/0x80 [i915] [28123.544275] [] i9xx_crtc_mode_set+0x6b7/0xc60 [i915] [28123.544293] [] ? vblank_disable_and_save+0x16c/0x190 [drm] [28123.544314] [] ? i965_update_wm+0x189/0x220 [i915] [28123.544335] [] intel_crtc_mode_set+0x5c/0x90 [i915] [28123.544346] [] drm_crtc_helper_set_mode+0x2a2/0x470 [drm_kms_helper] [28123.544359] [] drm_helper_resume_force_mode+0x6d/0x140 [drm_kms_helper] [28123.544376] [] i915_reset+0x211/0x2d0 [i915] [28123.544393] [] i915_error_work_func+0xae/0xf0 [i915] [28123.544405] [] process_one_work+0x101/0x3a0 [28123.544411] [] ? apic_timer_interrupt+0x31/0x38 [28123.544428] [] ? i915_driver_irq_postinstall+0x170/0x170 [i915] [28123.544433] [] worker_thread+0x124/0x2d0 [28123.544438] [] ? manage_workers.isra.27+0x110/0x110 [28123.544442] [] kthread+0x6d/0x80 [28123.544447] [] ? flush_kthread_worker+0x80/0x80 [28123.544453] [] kernel_thread_helper+0x6/0x10 [28123.544456] ---[ end trace a6d75ec214433a9e ]--- [28123.656486] ------------[ cut here ]------------ [28123.656524] WARNING: at /build/buildd/linux-3.2.0/drivers/gpu/drm/i915/intel_display.c:793 intel_enable_pipe+0x144/0x150 [i915]() [28123.656528] Hardware name: 7762WU2 [28123.656531] PLL state assertion failure (expected on, current off) [28123.656534] Modules linked in: batman_adv(O) pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) dm_crypt arc4 snd_hda_codec_analog btusb pcmcia ath5k ath mac80211 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event yenta_socket psmouse pcmcia_rsrc snd_seq pcmcia_core serio_raw cfg80211 snd_timer snd_seq_device thinkpad_acpi nvram snd tpm_tis bnep rfcomm soundcore mac_hid snd_page_alloc bluetooth parport_pc ppdev binfmt_misc lp parport usbhid hid firewire_ohci sdhci_pci sdhci firewire_core crc_itu_t i915 drm_kms_helper drm e1000e i2c_algo_bit video [28123.656598] Pid: 15686, comm: kworker/u:2 Tainted: G W O 3.2.0-23-generic-pae #36-Ubuntu [28123.656601] Call Trace: [28123.656612] [] warn_slowpath_common+0x72/0xa0 [28123.656634] [] ? intel_enable_pipe+0x144/0x150 [i915] [28123.656655] [] ? intel_enable_pipe+0x144/0x150 [i915] [28123.656661] [] warn_slowpath_fmt+0x33/0x40 [28123.656682] [] intel_enable_pipe+0x144/0x150 [i915] [28123.656706] [] i9xx_crtc_enable+0x6a/0xa0 [i915] [28123.656728] [] i9xx_crtc_commit+0xd/0x10 [i915] [28123.656738] [] drm_crtc_helper_set_mode+0x2f8/0x470 [drm_kms_helper] [28123.656752] [] drm_helper_resume_force_mode+0x6d/0x140 [drm_kms_helper] [28123.656770] [] i915_reset+0x211/0x2d0 [i915] [28123.656787] [] i915_error_work_func+0xae/0xf0 [i915] [28123.656798] [] process_one_work+0x101/0x3a0 [28123.656806] [] ? apic_timer_interrupt+0x31/0x38 [28123.656822] [] ? i915_driver_irq_postinstall+0x170/0x170 [i915] [28123.656827] [] worker_thread+0x124/0x2d0 [28123.656832] [] ? manage_workers.isra.27+0x110/0x110 [28123.656836] [] kthread+0x6d/0x80 [28123.656841] [] ? flush_kthread_worker+0x80/0x80 [28123.656847] [] kernel_thread_helper+0x6/0x10 [28123.656850] ---[ end trace a6d75ec214433a9f ]--- [28123.712030] ------------[ cut here ]------------ [28123.712064] WARNING: at /build/buildd/linux-3.2.0/drivers/gpu/drm/i915/intel_display.c:930 assert_pipe+0x75/0x80 [i915]() [28123.712068] Hardware name: 7762WU2 [28123.712071] pipe B assertion failure (expected on, current off) [28123.712074] Modules linked in: batman_adv(O) pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) dm_crypt arc4 snd_hda_codec_analog btusb pcmcia ath5k ath mac80211 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event yenta_socket psmouse pcmcia_rsrc snd_seq pcmcia_core serio_raw cfg80211 snd_timer snd_seq_device thinkpad_acpi nvram snd tpm_tis bnep rfcomm soundcore mac_hid snd_page_alloc bluetooth parport_pc ppdev binfmt_misc lp parport usbhid hid firewire_ohci sdhci_pci sdhci firewire_core crc_itu_t i915 drm_kms_helper drm e1000e i2c_algo_bit video [28123.712138] Pid: 15686, comm: kworker/u:2 Tainted: G W O 3.2.0-23-generic-pae #36-Ubuntu [28123.712141] Call Trace: [28123.712151] [] warn_slowpath_common+0x72/0xa0 [28123.712173] [] ? assert_pipe+0x75/0x80 [i915] [28123.712193] [] ? assert_pipe+0x75/0x80 [i915] [28123.712198] [] warn_slowpath_fmt+0x33/0x40 [28123.712221] [] assert_pipe+0x75/0x80 [i915] [28123.712245] [] intel_enable_plane+0x26/0x80 [i915] [28123.712267] [] i9xx_crtc_enable+0x77/0xa0 [i915] [28123.712288] [] i9xx_crtc_commit+0xd/0x10 [i915] [28123.712298] [] drm_crtc_helper_set_mode+0x2f8/0x470 [drm_kms_helper] [28123.712313] [] drm_helper_resume_force_mode+0x6d/0x140 [drm_kms_helper] [28123.712330] [] i915_reset+0x211/0x2d0 [i915] [28123.712346] [] i915_error_work_func+0xae/0xf0 [i915] [28123.712358] [] process_one_work+0x101/0x3a0 [28123.712364] [] ? apic_timer_interrupt+0x31/0x38 [28123.712381] [] ? i915_driver_irq_postinstall+0x170/0x170 [i915] [28123.712386] [] worker_thread+0x124/0x2d0 [28123.712390] [] ? manage_workers.isra.27+0x110/0x110 [28123.712395] [] kthread+0x6d/0x80 [28123.712400] [] ? flush_kthread_worker+0x80/0x80 [28123.712436] [] kernel_thread_helper+0x6/0x10 [28123.712440] ---[ end trace a6d75ec214433aa0 ]---