[i815] X server doesn't use resolution capabilities
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
xf86-video-intel |
Confirmed
|
High
|
|||
linux (Ubuntu) |
Won't Fix
|
Undecided
|
Unassigned | ||
xserver-xorg-video-intel (Ubuntu) |
Invalid
|
High
|
Unassigned |
Bug Description
With upgrade to hardy the highest possible resolution reduced to 800x600.
In gutsy and dapper the highest resolution was 1280x1024@60 Hz on the same hardware.
The system was upgraded from dapper to hardy.
Chipset i815 (from Xorg.0.log)
Similar bug: #162136
in my GUTSY!-installation (for hardy with bug after reboot):
mueller@gutsy:~$ cat /etc/X11/xorg.conf
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "Intel Corporation 82815 CGC [Chipset Graphics Controller]"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "Standardbildsc
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation 82815 CGC [Chipset Graphics Controller]"
Monitor "Standardbildsc
SubSection "Display"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
EndSection
mueller@gutsy:~$ lspci -nn | grep VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation 82815 Chipset Graphics Controller (CGC) [8086:1132] (rev 02)
mueller@gutsy:~$ sudo ddcprobe
vbe: VESA 3.0 detected.
oem: Intel(R) 810, Intel(R) 815 Chipset Video BIOS
vendor: Intel Corporation
product: Intel(R) 810, Intel(R) 815 Chipset Hardware Version 0.0
memory: 1024kb
memory: 4096kb
mode: 132x25 (text)
mode: 132x43 (text)
mode: 132x50 (text)
mode: 132x60 (text)
mode: 320x200x64k
mode: 640x400x256
mode: 640x480x256
mode: 640x480x32k
mode: 640x480x64k
mode: 640x480x16m
mode: 800x600x16
mode: 800x600x256
mode: 800x600x32k
mode: 800x600x64k
mode: 800x600x16m
mode: 1024x768x256
edid:
edidfail
mueller@gutsy:~$ xrandr
Screen 0: minimum 640 x 480, current 1280 x 1024, maximum 1280 x 1024
default connected 1280x1024+0+0 0mm x 0mm
1280x1024 60.0*
1280x960 60.0
1280x800 60.0
1280x768 60.0
1152x768 55.0
1024x768 60.0
800x600 60.0 56.0
640x480 60.0
I'll create a "reply" to this bug with the outputs from my hardy installation after reboot.
Changed in xserver-xorg-video-intel: | |
status: | Incomplete → Confirmed |
Changed in xserver-xorg-video-intel (Ubuntu): | |
status: | Incomplete → Confirmed |
summary: |
- X server doesn't use resolution capabilities + [i815] X server doesn't use resolution capabilities |
tags: | added: resolution |
Changed in xserver-xorg-video-intel (Ubuntu): | |
status: | Incomplete → Confirmed |
Changed in xserver-xorg-video-intel: | |
status: | Unknown → Confirmed |
tags: | added: gutsy i815 karmic |
Changed in xserver-xorg-video-intel (Ubuntu): | |
importance: | Medium → High |
tags: | added: hardy |
Changed in xserver-xorg-video-intel: | |
importance: | Unknown → High |
Changed in xserver-xorg-video-intel: | |
importance: | High → Unknown |
Changed in xserver-xorg-video-intel: | |
importance: | Unknown → High |
In my HARDY-installation
mueller@dhcppc4:~$ cat /etc/X11/xorg.conf
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "Device"
Identifier "Configured Video Device"
Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
# Von mue:
# Identifier "Default Screen"
# Device "Intel Corporation 82815 CGC [Chipset Graphics Controller]"
# DefaultDepth 24
# SubSection "Display"
# Modes "1280x1024"
# EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
EndSection
mueller@dhcppc4:~$ lspci -nn | grep VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation 82815 Chipset Graphics Controller (CGC) [8086:1132] (rev 02)
mueller@dhcppc4:~$ lspci -nn | grep VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation 82815 Chipset Graphics Controller (CGC) [8086:1132] (rev 02)
mueller@dhcppc4:~$ sudo ddcprobe
[sudo] password for mueller:
vbe: VESA 3.0 detected.
oem: Intel(R) 810, Intel(R) 815 Chipset Video BIOS
vendor: Intel Corporation
product: Intel(R) 810, Intel(R) 815 Chipset Hardware Version 0.0
memory: 1024kb
memory: 4096kb
mode: 132x25 (text)
mode: 132x43 (text)
mode: 132x50 (text)
mode: 132x60 (text)
mode: 320x200x64k
mode: 640x400x256
mode: 640x480x256
mode: 640x480x32k
mode: 640x480x64k
mode: 640x480x16m
mode: 800x600x16
mode: 800x600x256
mode: 800x600x32k
mode: 800x600x64k
mode: 800x600x16m
mode: 1024x768x256
edid:
edidfail
mueller@dhcppc4:~$ xrandr
Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600
default connected 800x600+0+0 0mm x 0mm
800x600 60.0* 56.0
640x480 60.0