[Fujitsu AMILO Xi 1554] Crackling sound with DVD playback on Lucid
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
alsa-driver (Ubuntu) |
Invalid
|
Undecided
|
Unassigned |
Bug Description
Binary package hint: alsa-base
I have a Fujitsu-Siemens notebook with a HDA-Intel audio card that I first installed with Feisty Fawn. Since then I have upgraded every half year to the latest Kubuntu release, and DVD playback was never a problem. Now I have upgraded from Karmic to Lucid and when playing DVDs the sound crackles like an old record.
When I boot into a backup copy of Karmic again, DVD playback is still fine, so it is not a problem of broken hardware.
I have tried doing a fresh install of Kubuntu Lucid using the alternate CD, and the problem also occurs on this fresh installation (the only thing I did after the installation finished was to install the non-free codecs as proposed by the dragon video player in order to be able to play DVDs), so it is not an upgrade problem.
This crackling sound only occurs on DVD playback, not when playing mp3 and also not when watching youtube videos. It is independent of the player software: it occurs with dragon as well as kaffeine as well as vlc. The funny thing is that – with all players – the crackle sounds occur every now and then (few seconds) when running the player in windowed mode, but when switching the player to fullscreen mode, the crackling gets so strong that you can barely understand speech.
Turning off compositing and desktop effects does not help.
Installing "linux-
Compiling the latest alsa source modules does not help.
The sound crackles independent of the volume, so it does not only occur with volume near 100%.
“dmesg | grep -i hda“ does not reveal any problem.
ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: alsa-base 1.0.22.
ProcVersionSign
Uname: Linux 2.6.32-22-generic i686
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
Architecture: i386
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0xb0000000 irq 22'
Mixer name : 'Realtek ALC889A'
Components : 'HDA:10573055,
Controls : 45
Simple ctrls : 26
Date: Mon May 10 18:01:21 2010
PackageArchitec
ProcEnviron:
LANGUAGE=
LANG=de_DE.UTF-8
SHELL=/bin/bash
SourcePackage: alsa-driver
UserAsoundrc:
# ALSA library configuration file
# Include settings that are under the control of asoundconf(1).
# (To disable these settings, comment out this line.)
</home/
dmi.bios.date: 07/19/2007
dmi.bios.vendor: FUJITSU SIEMENS
dmi.bios.version: 1.25
dmi.board.name: AMILO Xi 1554
dmi.board.vendor: FUJITSU SIEMENS
dmi.board.version: Not Applicable
dmi.chassis.
dmi.chassis.type: 10
dmi.chassis.vendor: FUJITSU SIEMENS
dmi.chassis.
dmi.modalias: dmi:bvnFUJITSUS
dmi.product.name: AMILO Xi 1554
dmi.product.
dmi.sys.vendor: FUJITSU SIEMENS
Andreas Schiffer (andreas-schiffer) wrote : | #1 |
- AlsaDevices.txt Edit (762 bytes, text/plain; charset="utf-8")
- AplayDevices.txt Edit (389 bytes, text/plain; charset="utf-8")
- ArecordDevices.txt Edit (533 bytes, text/plain; charset="utf-8")
- BootDmesg.txt Edit (48.9 KiB, text/plain; charset="utf-8")
- Card0.Amixer.values.txt Edit (5.1 KiB, text/plain; charset="utf-8")
- Card0.Codecs.codec.0.txt Edit (145 bytes, text/plain; charset="utf-8")
- Card0.Codecs.codec.1.txt Edit (11.2 KiB, text/plain; charset="utf-8")
- CurrentDmesg.txt Edit (3.2 KiB, text/plain; charset="utf-8")
- Dependencies.txt Edit (5.7 KiB, text/plain; charset="utf-8")
- PciMultimedia.txt Edit (619 bytes, text/plain; charset="utf-8")
- ProcCpuinfo.txt Edit (1.5 KiB, text/plain; charset="utf-8")
- UserAsoundrcAsoundconf.txt Edit (2.1 KiB, text/plain; charset="utf-8")
Øyvind Stegard (oyvindstegard) wrote : | #2 |
Maarten Fonville (maarten-fonville) wrote : | #3 |
My girlfriend's computer got exactly the same issue (I am also tracking the bug of Ovyind and his report on the kernel.org bugzilla)
Andreas Schiffer (andreas-schiffer) wrote : | #4 |
Thans a lot, Øyvind, you made my day.
When booting with "radeon.modeset=0" there is no problem with crackling sound.
So this seems to be a bug with KMS...
At least now I have a workaround until this bug is really fixed.
Thanks again!
In freedesktop.org Bugzilla #28106, JasonPorter (jasonporter) wrote : | #5 |
Several Launchpad bug reports in process report radeon KMS conflicts with Intel wifi and audio output, causing wireless to hang/drop until power cycle and audio to crackle during any high GPU load. Disabling KMS as a workaround returns normal system operation.
Relevant Launchpad reports:
https:/
https:/
https:/
And one on Bugzilla:
https:/
My own hardware is a Thinkpad T60 with Radeon X1400 and Intel wireless (iwl3945 driver) running vanilla Ubuntu 10.04. Users of Radeon X1250, X1300, and Xpress 200M chipsets have also reported the same behavior, on Lenovo, Dell and LG laptops. Using a mainline kernel does not change the behavior.
This may possibly be due to a difference in PCI configuration between KMS and UMS, they use different IRQs for "Pin A" as detailed in the Bugzilla report linked above.
Thanks for any assistance you can provide! And thanks for all your hard work!
JasonPorter (jasonporter) wrote : Re: Crackling sound with DVD playback on Lucid | #6 |
This seems to be due to the same problem as this bug with radeon KMS and wireless:
https:/
Not sure if I should mark duplicate, since the expression is slightly different, but I will add the radeon driver project as an "also affects".
JasonPorter (jasonporter) wrote : | #7 |
Adding radeon driver as affected project, linking to upstream bug report.
In freedesktop.org Bugzilla #28106, Øyvind Stegard (oyvindstegard) wrote : | #8 |
Confirming this one, Thinkpad Z61m, ATI X1400. However, the IRQ difference does not seem to matter for the audio problems (I've tested with radeon KMS both with and without MSI, which is the difference between the two PCI configs listed in bug at https:/
In freedesktop.org Bugzilla #28106, agd5f (agd5f) wrote : | #9 |
Is there an option in your bios to assign different irqs to different pci devices? Some systems set every device to the same irq.
In freedesktop.org Bugzilla #28106, Maarten Fonville (maarten-fonville) wrote : | #10 |
I don't think it is directly an IRQ issue that can be solved in the BIOS.
Because on my girlfriend's laptop which is also hit by this problem the radeon takes IRQ 17 with IO-APIC-fasteoi and hda_intel takes IRQ 24 with PCI-MSI-edge
In freedesktop.org Bugzilla #28106, Maarten Fonville (maarten-fonville) wrote : | #11 |
(In reply to comment #3)
> I don't think it is directly an IRQ issue that can be solved in the BIOS.
> Because on my girlfriend's laptop which is also hit by this problem the radeon
> takes IRQ 17 with IO-APIC-fasteoi and hda_intel takes IRQ 24 with PCI-MSI-edge
Actually, before booting the kernel itself (thus it can not be seen in DMESG) there is the message that starts with:
pci 0000:00:00.0: address space collision [..more stuff here..]
Just like in this mail I believe: http://
I don't know whether this could be relevant.
In freedesktop.org Bugzilla #28106, Øyvind Stegard (oyvindstegard) wrote : | #12 |
I have no messages about address space collisions in kernel boot log. I'll add my hardware info to this bug tomorrow (interrupts, PCI, dmesg, Xorg, etc).
In freedesktop.org Bugzilla #28106, JasonPorter (jasonporter) wrote : | #13 |
This appears to also be causing kernel crashes on some systems when wifi is powered off using the hardware switch. Disabling radeon KMS causes the crash behavior to disappear. I will inform devs in the upstream bug reports on that issue.
Reported in https:/
In freedesktop.org Bugzilla #28106, JasonPorter (jasonporter) wrote : | #14 |
(In reply to comment #6)
Oops, nevermind... I'm already upstream. Too many tabs open, sorry.
In freedesktop.org Bugzilla #28106, agd5f (agd5f) wrote : | #15 |
Is there an option in your bios to assign different irqs to different pci
devices? Some systems set every device to the same irq. If so, please try changing the setting to auto, or select different irqs for each device and see if that helps. Also, please try both with and without msi enabled (boot with pci=nomsi).
In freedesktop.org Bugzilla #28106, Øyvind Stegard (oyvindstegard) wrote : | #16 |
(In reply to comment #8)
> Is there an option in your bios to assign different irqs to different pci
> devices? Some systems set every device to the same irq. If so, please try
> changing the setting to auto, or select different irqs for each device and see
> if that helps. Also, please try both with and without msi enabled (boot with
> pci=nomsi).
Yes. However, the list looks very uninformative. It's under PCI config, and basically contains just INTA-> 11, INTB -> 11, INTC -> 11, and so on. Tried setting to Auto-select on all entries (instead of 11). System booted OK, but it didn't help (on KMS+audio problems). Tried assigning sequentially from IRQ 3 and up, but then I got a really loud Thinkpad-style alarm beep, system didn't get past POST, and BIOS informing that network controller was missing IRQ. So obviously I switched back to default settings. The /proc/interrupts list didn't really look any different with BIOS-autoconfig for PCI IRQs (IIRC).
Booting with option pci=nomsi does not help at all, even though it definitely affects IRQ config, since /proc/interrupts contains no MSI-entries when booting with this option.
I will now be attaching some info for system running 2.6.34 kernel on Ubuntu Lucid x86 with ATIX1400 (KMS-mode). System has severe audio glitching with KMS, and no glitching at all in UMS mode.
In freedesktop.org Bugzilla #28106, Øyvind Stegard (oyvindstegard) wrote : | #17 |
Created an attachment (id=35734)
Kernel boot log
Audio glitching reproduced immediately after logging in to X session.
In freedesktop.org Bugzilla #28106, Øyvind Stegard (oyvindstegard) wrote : | #18 |
Created an attachment (id=35735)
Contents of /proc/interrupts
In freedesktop.org Bugzilla #28106, Øyvind Stegard (oyvindstegard) wrote : | #19 |
Created an attachment (id=35736)
Contents of /proc/interrupts with MSI disabled
Does not resolve issue.
In freedesktop.org Bugzilla #28106, Øyvind Stegard (oyvindstegard) wrote : | #20 |
Created an attachment (id=35737)
PCI device config
In freedesktop.org Bugzilla #28106, Øyvind Stegard (oyvindstegard) wrote : | #21 |
Created an attachment (id=35738)
Xorg startup log
In freedesktop.org Bugzilla #28106, Øyvind Stegard (oyvindstegard) wrote : | #22 |
The test setup I use to quickly reproduce and verify that the problem is there:
1) Play a pure sound which easily revelase playback glitches:
$ gst-launch-0.10 audiotestsrc ! pulsesink
2) Play some video (doesn't matter what) with MPlayer, using plain x11 output and no sound:
$ mplayer /path/to/
3) Test audio starts glitching and the glitching becomes worse if I put the video in fullscreen.
And some observations about test:
1) There is not much load on system during test (MPlayer uses around 40% CPU, Xorg floats under 12% CPU, for a 1024x576 video with no sound).
2) There is a lot less audio glitching if I run things in a completely composited environment (e.g. Compiz with no unredirection for fullscreen windows). If I *do* unredirect fullscreen windows with Compiz the glitching becomes worse in fullscreen.
3) There is alomst no glitching at all if using XV for video playback in the test, instead of plain old x11. Obviously that's not going to help for apps that don't use XV, like fullscreen Flash video streaming or any affected non-video app.
4) The glitching is worse when video window is full screen.
5) HDA intel driver typically always reports that IRQ timing work-around has been activated. This doesn't happen in UMS-mode.
And some observations not just related to the specific test setup:
1) Flash fullscreen video playback causes more severe audio glitches if *not* running composited in fullscreen, for instance under Compiz with "Unredirect fullscreen windows" enabled. This is what typically also takes down wireless (just happened now with current setup, as I was testing Flash and writing this).
2) Flash fullscreen video causes glitches even when redirected in composited env.
3) Flash doesn't use XV, seems to correspond well with MPlayer -vo x11 being much worse than when using -vo xv.
4) There are no playback issues with video during any of these tests, the video is smooth, system not overloaded. And besides, the test sound generator requires almost no resources at all.
5) [ 1535.437114] CE: hpet increased min_delta_ns to 7500 nsec
Don't really know the meaning of this one, but it typically appears during problems with wireless and/or audio when running under KMS. Kernel compensating for what is seen as accuracy issues with system timing ?
6) It doesn't have to be MPlayer-vo-x11 or Flash that triggers problem, I just use them because they so easily reproduce it. I have heard audio popping when scrolling Firefox pages or moving windows around, and I've managed to take down wireless when launching Neverball (OpenGL-game).
7) No matter what IRQ config or snd-hda-intel options I test, the problems are always there with KMS and disappear with UMS.
In freedesktop.org Bugzilla #28106, JasonPorter (jasonporter) wrote : | #23 |
To add my own results... booting with pci=nomsi doesn't seem to have an effect on my system (Thinkpad T60). I have the same PCI options in BIOS as Øyvind reports, all are set to "11" by default but changing to Auto seems to have very little effect on actual behavior after boot. I will test further to see if there are any other differences with MSI off, but so far it doesn't seem to have helped.
In freedesktop.org Bugzilla #28106, agd5f (agd5f) wrote : | #24 |
Does booting with radeon.
In freedesktop.org Bugzilla #28106, agd5f (agd5f) wrote : | #25 |
Apply the settings with a cold boot.
In freedesktop.org Bugzilla #28106, Øyvind Stegard (oyvindstegard) wrote : | #26 |
(In reply to comment #17)
> Does booting with radeon.
Does not help on my hardware. Tested with kernel 2.6.34, cold boot.
In freedesktop.org Bugzilla #28106, JasonPorter (jasonporter) wrote : | #27 |
(In reply to comment #17)
> Does booting with radeon.
For some reason, passing that option at boot seems to disable KMS on my system. I've tried it both without a radeon.modeset declaration, and with radeon.modeset=1, and in both cases Xorg.0.log shows KMS to be disabled when radeon.
In freedesktop.org Bugzilla #28106, agd5f (agd5f) wrote : | #28 |
(In reply to comment #20)
> (In reply to comment #17)
> > Does booting with radeon.
>
> For some reason, passing that option at boot seems to disable KMS on my system.
> I've tried it both without a radeon.modeset declaration, and with
> radeon.modeset=1, and in both cases Xorg.0.log shows KMS to be disabled when
> radeon.
If your kernel is too old, the option is not valid and the module won't load. See modinfo radeon to verify.
In freedesktop.org Bugzilla #28106, Øyvind Stegard (oyvindstegard) wrote : | #29 |
I've noticed that the audio glitches become a lot worse when many windows are open and running Compiz (I did an artificial test). I can open lots of windows on one desktop, switch back to an empty desktop, open a single window there and trigger audio drop-outs (simple test sound) just by toggling maximization state of that single window, even though all the other windows are not in view and system load is close to nil. Basically, most Compiz-operations besides simple window movement will cause glitches.
Interestingly, I might have pushed things too far, since Compiz crashed with this message:
drmRadeonCmdBuffer: -12. Kernel failed to parse or rejected command stream. See dmesg for more info.
Kernel log contained this:
[ 543.577306] [drm:radeon_
[ 574.532539] [drm:radeon_
[ 742.437808] [drm:radeon_
* This was all with radeon.
* Don't know the consequences of using the Ubuntu default Xorg-driver/
* The version of the radeon module in the default Ubuntu kernel does not have disp_priority option.
In freedesktop.org Bugzilla #28106, JasonPorter (jasonporter) wrote : | #30 |
(In reply to comment #21)
> If your kernel is too old, the option is not valid and the module won't load.
> See modinfo radeon to verify.
I'm running the standard 2.6.32-22-generic that is current in Ubuntu Lucid.
In freedesktop.org Bugzilla #28106, Michel Dänzer (michel-daenzer) wrote : | #31 |
Has it been considered that this might be due to interrupt latency caused by radeon KMS? E.g. spending too much time in the IRQ handler or unnecessarily running it with other IRQs disabled.
In freedesktop.org Bugzilla #28106, Øyvind Stegard (oyvindstegard) wrote : | #32 |
Large blocks of screen updates seems to be most problematic. I can take down wireless by scrolling through a maximized gnome-terminal, for instance.. Same thing will fullscreen Flash and mplayer -fs -vo x11 ..
In freedesktop.org Bugzilla #28106, Łukasz Krotowski (lukasz-krotowski) wrote : | #33 |
It seems that problem does not occur in current drm-radeon-testing (9e67e5b1a6fd4b
Øyvind Stegard (oyvindstegard) wrote : Re: Crackling sound with DVD playback on Lucid | #34 |
Problem still there on latest kernel 2.6.32-23-generic #37~pre201006041000 from pre-proposed (Ubuntu kernel-ppa).
Luke Yelavich (themuso) wrote : Re: [Bug 578342] Re: Crackling sound with DVD playback on Lucid | #35 |
Could you plesae try installing the linux-alsa-
Thanks.
Andreas Schiffer (andreas-schiffer) wrote : Re: Crackling sound with DVD playback on Lucid | #36 |
Hi Luke,
sorry for the late answer; I couldn't find time for this earlier.
Now I'd like to test your fix, but the latest version I can find on the Ubuntu Audio Dev PPA is linux-alsa-
Maybe I'm too stupid to use a PPA...
Can you please help me on?
Thanks.
Øyvind Stegard (oyvindstegard) wrote : Re: [Bug 578342] Re: Crackling sound with DVD playback on Lucid | #37 |
Luke Yelavich <email address hidden> writes:
> Could you plesae try installing the linux-alsa-
> package from the Ubuntu Audio Dev PPA, http://
> audio-dev/+archive, and reboot, then attempt to reproduce the problem.
Is there any new stuff in this alsa-modules package compared to the alsa
modules in the latest 2.6.32-23-generic kernel in proposed ? I've been
running the proposed kernel for a while and it has all the same problems
as current -22 wrt. to audio and KMS.
In freedesktop.org Bugzilla #28106, Maarten Fonville (maarten-fonville) wrote : | #38 |
(In reply to comment #26)
> It seems that problem does not occur in current drm-radeon-testing
> (9e67e5b1a6fd4b
I myself don't have the possibility to test this at the moment. I will only have access to the laptop involved in about 3 weeks.
But maybe Oyvind could this the drm-radeon-testing branch on his laptop?
And if it does solve the problem, we should bisect to find out what does solve this problem.
In freedesktop.org Bugzilla #28106, Øyvind Stegard (oyvindstegard) wrote : | #39 |
(In reply to comment #27)
> (In reply to comment #26)
> > It seems that problem does not occur in current drm-radeon-testing
> > (9e67e5b1a6fd4b
>
> I myself don't have the possibility to test this at the moment. I will only
> have access to the laptop involved in about 3 weeks.
> But maybe Oyvind could this the drm-radeon-testing branch on his laptop?
>
> And if it does solve the problem, we should bisect to find out what does solve
> this problem.
Assuming you mean this branch:
http://
I compiled the branch head and gave it a spin. KMS performance is noticeably better compared to 2.6.32(
1. Severe audio skipping/crackling whenever something was moving, changing, minimizing, maximizing, etc.
2. Wireless was extremely unstable, in fact I add to boot back into Lucid kernel to write this comment, because it kept falling down. Of course, that might just be the kernel itself, I don't know.
Conclusion is that nothing is better on my hardware with this kernel, except the KMS performance (Compiz feels somewhat snappier when window count is high).
So it's back to good old UMS and DFS-corruption for me :) :/ ...
In freedesktop.org Bugzilla #28106, Flockmock (flockmock) wrote : | #40 |
Hi,
I am affected by this bug as well and tried to bisect it. My bisect log:
git bisect start
# good: [60b341b778cc29
git bisect good 60b341b778cc292
# bad: [57d54889cd00db
git bisect bad 57d54889cd00db2
# good: [47871889c601d8
git bisect good 47871889c601d81
# bad: [1154fab73ccbab
git bisect bad 1154fab73ccbab0
# good: [3e9cc2f3b7ddab
git bisect good 3e9cc2f3b7ddabb
# good: [5619c28061ff9d
git bisect good 5619c28061ff9d2
so there are ~800 commits left and now every kernel will fail to boot due to some SCSI issues, I tried many kernels "by hand" via 'git visualize'. Can anybody track this further down, perhaps someone with no SCSI devices in their machines? ;)
thanks a lot and we should really get this regression, 2.6.35-rc5 is affected as well.
cheers, florian
In freedesktop.org Bugzilla #28106, Ben Hutchings (benh-debian) wrote : | #41 |
I have one user report that this was fixed between Debian kernel versions 2.6.32-15 and 2.6.32-18, which have radeon drivers from 2.6.33.5 and 2.6.33.7 respectively. So one of the changes to output handling in there may have fixed this.
In freedesktop.org Bugzilla #28106, Ben Hutchings (benh-debian) wrote : | #42 |
(In reply to comment #30)
> I have one user report that this was fixed between Debian kernel versions
> 2.6.32-15 and 2.6.32-18, which have radeon drivers from 2.6.33.5 and 2.6.33.7
> respectively. So one of the changes to output handling in there may have fixed
> this.
Sorry, the latter version is actually 2.6.33.6. There aren't many radeon changes between these:
commit f417b91c30e84e7
Author: Dave Airlie <email address hidden>
Date: Sat May 29 06:50:37 2010 +1000
drm/radeon: fix the r100/r200 ums block 0 page fix
commit 1a0c0aa4945dfa8
Author: Dave Airlie <email address hidden>
Date: Wed Feb 24 17:17:13 2010 +1000
drm/radeon: r100/r200 ums: block ability for userspace app to trash 0 page a
nd beyond
commit 7840726875499c2
Author: Alex Deucher <email address hidden>
Date: Tue May 18 00:23:15 2010 -0400
drm/
commit 66ff9ff4525f96b
Author: Alex Deucher <email address hidden>
Date: Tue May 18 19:26:46 2010 -0400
drm/radeon/kms: reset ddc_bus in object header parsing
In freedesktop.org Bugzilla #28106, agd5f (agd5f) wrote : | #43 |
(In reply to comment #31)
>
> Sorry, the latter version is actually 2.6.33.6. There aren't many radeon
> changes between these:
None of these are really likely to be related to this bug; the first 2 are ums, and the other two were fairly specific bug fixes. I suspect if that kernel update does fix this bug the change is probably in the wifi or sound drivers or possibly something else in the kernel.
In freedesktop.org Bugzilla #28106, Christian-speckner (christian-speckner) wrote : | #44 |
I'd like to chime in here: I am on a Thinkpad T60 (core duo -> 32 bit) with a radeon X1300 and switched to KMS + gallium recently and, while everything is working remarkably nice and stable in general (big kudos to the developers), I've got some negative side effects which look like the IRQ issues observed by the others in this thread to me. Symptoms are:
1) SATA is being reconfigured and even reset from time to time. This can be reproduced reliably by switiching VTs which causes
ata1.00: configured for UDMA/133
ata1: EH complete
to appear in dmesg most of the time. Under heavy GPU load, the link will be reset from time to time:
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:
ata1.00: ACPI cmd f5/00:00:
ata1.00: ACPI cmd ef/10:03:
ata1.00: ACPI cmd ef/02:00:
ata1.00: ACPI cmd f5/00:00:
ata1.00: ACPI cmd ef/10:03:
ata1.00: configured for UDMA/133
ata1.00: configured for UDMA/133
ata1: EH complete
Very occasionally, the controller will lock for some seconds before the reset occurs.
2) Under heavy GPU load, sound (intel HDA) has a tendency to crackle. I am not using a sound daemon, just plain alsa. The "snd-hda-intel timing workaround activated, blablabla..." message appears in dmesg.
3) I get NMIs from time to time (however, I don't see how those might be related):
Uhhuh. NMI received for unknown reason b1 on CPU 0.
I am running gentoo (mostly stable) with kernel 2.6.35 (gentoo patchset), xf86-video-ati 6.13.1, mesa bleeding-edge git (master), xorg 1.7.7 and libdrm git (master again). I've been trying different versions of everything (including vanilla 2.6.36-rc1) as well as different preemtion settings without any effect on those symptoms. As I never had such issues before switching to KMS, I stronly suspect KMS to be the culprit (however, SATA reconfiguration messages _have_ appeared before from time to time, so it might be that KMS is aggrevating a timing glitch already present in the hardware). To me, this looks somewhat like interrupts being masked overly long somewhere in the KMS code.
In freedesktop.org Bugzilla #28106, Christian-speckner (christian-speckner) wrote : | #45 |
I might add that disabling MSI has no effect for me either.
In freedesktop.org Bugzilla #28106, Christian-speckner (christian-speckner) wrote : | #46 |
Also adding lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc M52 [Mobility Radeon X1300]
02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
15:00.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller
and /proc/interrupts
CPU0 CPU1
0: 876624 195 IO-APIC-edge timer
1: 9878 4 IO-APIC-edge i8042
3: 2 0 IO-APIC-edge
9: 4703 0 IO-APIC-fasteoi acpi
12: 550556 0 IO-APIC-edge i8042
16: 1 0 IO-APIC-fasteoi yenta, uhci_hcd:usb2
17: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
18: 0 0 IO-APIC-fasteoi uhci_hcd:usb4
19: 0 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb5
45: 24014 1 PCI-MSI-edge ahci
46: 1644 1 PCI-MSI-edge eth0
47: 66832 6 PCI-MSI-edge iwl3945
48: 138 0 PCI-MSI-edge hda_intel
49: 104672 0 PCI-MSI-edge radeon
NMI: 1 0 Non-maskable interrupts
LOC: 88899 357836 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 0 0 Performance monitoring interrupts
PND: 0 0 Performance pending work
RES: 258412 350544 Rescheduling interrupts
CAL: 19 24 Function call interrupts
TLB: 1029 ...
Changed in xserver-xorg-driver-ati: | |
importance: | Unknown → Medium |
status: | Unknown → Confirmed |
Changed in xserver-xorg-driver-ati: | |
importance: | Medium → Unknown |
Changed in xserver-xorg-driver-ati: | |
importance: | Unknown → Medium |
In freedesktop.org Bugzilla #28106, Jantaegert (jantaegert) wrote : | #47 |
Hi, what is the state of this bug?
I'm using the same hardware like Jason does (Thinkpad T60 with Radeon X1400 and Intel wireless) and running Ubuntu 11.04. Kernel Version is 2.6.38 and the problems with audio glitches and wireless drops are still there. From time to time the system isn't going to hibernate or doesn't wake up after.
All this problems are gone without kms (radeon.modeset=0).
But now the Problem has gotten even worse as without kms the radeon driver only works with software rendering and the unity desktop won't load. Same with gnome 3 running Debian unstable/
If I can anything contribute to solve this bug, please let me know!
Reading all the comments bisecting the kernel appears the most promising way to me. Anyone who wants to explain me how to do that?
Thanks.
In freedesktop.org Bugzilla #28106, Michel Dänzer (michel-daenzer) wrote : | #48 |
(In reply to comment #36)
> Hi, what is the state of this bug?
It's weird, and nobody's had any good ideas what could cause it.
> But now the Problem has gotten even worse as without kms the radeon driver only
> works with software rendering and the unity desktop won't load. Same with gnome
> 3 running Debian unstable/
That's probably an installation / configuration problem (e.g. firmware not available where the radeon kernel driver initializes) and not directly related to this bug.
In freedesktop.org Bugzilla #28106, JasonPorter (jasonporter) wrote : | #49 |
An update, since I posted the original bug report... I'm now running Ubuntu 11.04, and still having the same problems that everyone else is experiencing.
I'm running the full xorg-edgers PPA, so I am running radeon 6.14.99+git20110504 and mesa 7.11.0+git20110504, with the latest standard Natty kernel (64-bit).
I'm in a quandry, because without kms I can't run Unity (which no-one seems to be able to explain), and with kms I get glitchy audio and wifi dropouts.
Please help, devs!
In freedesktop.org Bugzilla #28106, Fabi (fabsi-deactivatedaccount) wrote : | #50 |
Its not a fix, but a little workaround.
open terminal
xrandr
look whats your minimum resolution and tha name of the screen/output
now edit the grub linux line with video=[
for me its:
video=LVDS-
now reboot. KMS/VT will now have a res of 320x200, plymouth and X are normal. sound crickeling is gone (or I just can not notice it anymore)
In freedesktop.org Bugzilla #28106, Christian-speckner (christian-speckner) wrote : | #51 |
Taking opportunity of the fact that this ticket is coming back to life: this issue has still been accompanying over all mesa, X, ddx driver and kernel updates. I'm on 2.6.38 now, and sound is still stuttering.
> Its not a fix, but a little workaround.
> open terminal
> xrandr
> look whats your minimum resolution and tha name of the screen/output
> now edit the grub linux line with video=[
> for me its:
> video=LVDS-
> now reboot. KMS/VT will now have a res of 320x200, plymouth and X are normal.
> sound crickeling is gone (or I just can not notice it anymore)
I can confirm that this works for me too; I set the VT framebuffer to 640x480, and the crackling is much better. In addition, my desktop feels significantly faster (I'm using KDE 4.6 with kwin compositing) --- in particular, switching desktops with many open, complex windows like firefox sitting is considerably better now.
To the developers (and don't hesitate to beat me down if this is completely out of question): could it be that the issue is caused by too many transfers from system to video memory and the driver blocking interrupts while waiting for them to complete? As I suppose that changing the framebuffer resolution affects the VRAM layout, the impact of the above trick could be explained this way. This could also explain the fact this issue seems to predominantly affect users of laptops which have hardware relatively low on VRAM (64MB for my x1300 mobility). Speaking of which: the driver reports the following about my hardware:
radeon 0000:01:00.0: VRAM: 128M 0x0000000000000000 - 0x0000000007FFFFFF (64M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000008000000 - 0x0000000027FFFFFF
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 49 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 440368 kiB.
[TTM] Zone highmem: Available graphics memory: 1295860 kiB.
I never gave it much thought, but thinking about it, this seems suspicious to me as I am pretty sure that this device has only 64MB of VRAM.
In freedesktop.org Bugzilla #28106, agd5f (agd5f) wrote : | #52 |
(In reply to comment #40)
>
> radeon 0000:01:00.0: VRAM: 128M 0x0000000000000000 - 0x0000000007FFFFFF (64M
> used)
> radeon 0000:01:00.0: GTT: 512M 0x0000000008000000 - 0x0000000027FFFFFF
> [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> [drm] Driver supports precise vblank timestamp query.
> radeon 0000:01:00.0: irq 49 for MSI/MSI-X
> radeon 0000:01:00.0: radeon: using MSI.
> [drm] radeon: irq initialized.
> [drm] Detected VRAM RAM=128M, BAR=128M
> [drm] RAM width 64bits DDR
> [TTM] Zone kernel: Available graphics memory: 440368 kiB.
> [TTM] Zone highmem: Available graphics memory: 1295860 kiB.
>
> I never gave it much thought, but thinking about it, this seems suspicious to
> me as I am pretty sure that this device has only 64MB of VRAM.
Your device does have 64 MB of vram. The pci aperture is 128 MB, but there is only 64 MB of vram. That's why is says "64M used".
In freedesktop.org Bugzilla #28106, JasonPorter (jasonporter) wrote : | #53 |
(In reply to comment #40)
> I never gave it much thought, but thinking about it, this seems suspicious to
> me as I am pretty sure that this device has only 64MB of VRAM.
I'm using an X1400 here, with 128MB of vram. I'm not sure if that is helpful or not.
Here's some extra info for the fire, and one that surprised me when I discovered it yesterday: there are a few apps that render fullscreen video that do not exhibit the stuttering at all. This is new behavior, previously ANY video would cause the stuttering when fullscreened. This change that I'm seeing may not be the same on your systems, but it's worth testing.
A good example is the Hulu Desktop for Linux application, which streams high quality video fullscreen without any stutter. This uses the video card, the wifi connection, and the sound card at the same time, which is exactly the situation that causes problems for most people. The app specifies that it requires Flash 10.0.32 or higher, which suggests that it uses Flash for the video transport in some fashion. The application can be downloaded from http://
Also, on my system, switching into HTML5 video mode on Youtube (using Google Chrome) allows fullscreen 720p streaming without audio stutter. The same video played in standard Flash video mode (in Chrome or in Firefox) stutters heavily when maximized, in both 480p and 720p formats. In fact, any Flash-based web-embedded video stutters when maximized, on any site that I've tried (Vimeo, CBS, etc), including even Hulu's own web-based player.
I'm not sure what the story is on this, it's confusing. Maybe on my particular hardware the radeon driver is able to cope differently with the particular video rendering method used by Hulu Desktop and the browser HTML5 video implementations. If the Hulu Desktop application is using Flash, it's doing it differently than viewing the same video on Hulu.com in a browser, because the web-embedded player stutters and the Hulu Desktop application doesn't, and both are (theoretically) streaming from the same source.
I'm running very current versions of Mesa, Gallium and the radeon driver, so the particular combination of behaviors that I'm seeing may be a recent change. I also have a relatively fast system (Core 2 Duo with an SSD) and as always, system load seems to have a big impact on this issue appearing or not. So your results may not be the same as mine.
possibly relevant information from glxinfo:
direct rendering: Yes
OpenGL vendor string: X.Org R300 Project
OpenGL renderer string: Gallium 0.4 on ATI RV515
OpenGL version string: 2.1 Mesa 7.11-devel
In freedesktop.org Bugzilla #28106, Denk (denk) wrote : | #54 |
Anything new on this?
I've got a Thinkpad T60 with Radeon X1400, IWL3945 and Intel HDA (AD198x) with Linux 2.6.39, mesa 7.11-devel, xserver 1.10.1-devel, xf86-video-ati 6.14.1-devel and suffer from the already mentioned stuttering/choopy audio and frequent iwlwifi-crashes, too!
Regards
denk
In freedesktop.org Bugzilla #28106, Jantaegert (jantaegert) wrote : | #55 |
Created attachment 47928
Kernel log while loading the radeon driver
With kernel 2.6.39 I get the NMI message (see attachment) on every boot while the radeon driver is loaded. With earlier versions this happened only while i switched the console.
Maybe it would help to investigate the module loading?
If anyone can tell me how to do that, i can submit more detailled informations.
Thanks,
jan.
In freedesktop.org Bugzilla #28106, Maciej Borzecki (maciek-borzecki) wrote : | #56 |
(In reply to comment #44)
> Created an attachment (id=47928) [details]
> Kernel log while loading the radeon driver
>
> With kernel 2.6.39 I get the NMI message (see attachment) on every boot while
> the radeon driver is loaded. With earlier versions this happened only while i
> switched the console.
>
> Maybe it would help to investigate the module loading?
> If anyone can tell me how to do that, i can submit more detailled informations.
>
> Thanks,
> jan.
This might shed some light:
http://
In freedesktop.org Bugzilla #28106, Maciej Borzecki (maciek-borzecki) wrote : | #57 |
Created attachment 48007
dmesg from Ubuntu 11.04 - unaffected
In freedesktop.org Bugzilla #28106, Maciej Borzecki (maciek-borzecki) wrote : | #58 |
Created attachment 48008
dmesg from Fedora 15 - affected
In freedesktop.org Bugzilla #28106, Maciej Borzecki (maciek-borzecki) wrote : | #59 |
I've added dmesg output from Ubuntu 11.04 which is not affected with the bug (at least on my laptop - Thinkpad T60, 2623P2U, X1300) and Fedora 15 which does have the problem. Unless I missed something, the only relevant difference is DRM version reported, which is 2.8 for Ubuntu and 2.10 for Fedora (how come that's possible is another question).
So far, the following does not help:
- disp_priority=1
- agpmode=1
- gartsize=64
- dynclks=0
In freedesktop.org Bugzilla #28106, Jantaegert (jantaegert) wrote : | #60 |
(In reply to comment #45)
Dynamic Powermanagement is disabled here (powermanagement profile is fixed to "default", what means, that all pcie lines stay allways enabled).
In freedesktop.org Bugzilla #28106, Maciej Borzecki (maciek-borzecki) wrote : | #61 |
I played a bit with power_profile settings and it turns our that whenever profile is set to high, mid, sound stuttering is pronounced. Yet, once set to low, stuttering is gone (or unnoticeable).
If anyone wants to try (adjust path to suit your hardware):
echo low > /sys/class/
Then the actual frequency can be verified by:
cat /sys/kernel/
Also dynpm power_method does not really work, there was another bug report recenty that the frequency is never lowered if dynpm is used.
Additionally, given the recent fuss about pcie_aspm=force (and possible effect on PCIe), sound stuttering is present regardless of the setting.
In freedesktop.org Bugzilla #28106, Øyvind Stegard (oyvindstegard) wrote : | #62 |
(In reply to comment #50)
> I played a bit with power_profile settings and it turns our that whenever
> profile is set to high, mid, sound stuttering is pronounced. Yet, once set to
> low, stuttering is gone (or unnoticeable).
> If anyone wants to try (adjust path to suit your hardware):
> echo low > /sys/class/
> Then the actual frequency can be verified by:
> cat /sys/kernel/
Confirming this on ATI X1400 mobile, Ubuntu 11.04 x86. When using the "low" power profile, audio stuttering/
On my card, low setting results in:
# cat /sys/kernel/
default engine clock: 392000 kHz
current engine clock: 128250 kHz
default memory clock: 350000 kHz
current memory clock: 135000 kHz
PCIE lanes: 1
High setting gives:
# cat /sys/kernel/
default engine clock: 392000 kHz
current engine clock: 391500 kHz
default memory clock: 350000 kHz
current memory clock: 342000 kHz
PCIE lanes: 0
There's a difference not only in board frequencies, but also the PCIE lanes number (0 means full throttle, or is "more performant" than 1 I guess ??).
In freedesktop.org Bugzilla #28106, Maciej Borzecki (maciek-borzecki) wrote : | #63 |
(In reply to comment #51)
> There's a difference not only in board frequencies, but also the PCIE lanes
> number (0 means full throttle, or is "more performant" than 1 I guess ??).
The PCIe lanes information seems to be read from the card itself (at least that's for RV515), look here:
http://
While 1 is understandable (PCIe x1), 0 value is confusing and I can't tell if that'x x16 or not. Maybe one of the driver authorsa can provide some input.
I've failed to locate any docs that contain information on the registers exposed on the PCI.
In freedesktop.org Bugzilla #28106, agd5f (agd5f) wrote : | #64 |
Does adding noapic to the kernel commandline in grub help? See the last few comments in bug 37679.
In freedesktop.org Bugzilla #28106, Maciej Borzecki (maciek-borzecki) wrote : | #65 |
(In reply to comment #53)
> Does adding noapic to the kernel commandline in grub help? See the last few
> comments in bug 37679.
No, it seems to have no effect on the problem, at least on my setup.
In freedesktop.org Bugzilla #28106, Richtigfalsch (richtigfalsch) wrote : | #66 |
I'd like the importance of this bug being corrected to 'major' because disabling KMS in fact means a major loss of functionality. I'm now on kernel 2.6.40 and sadly this heavy bug still is there.
I skipped form Windows to Linux, mainly because the ATI Driver for the x1400 in my Thinkpad T60 (with iwl3945 od course) is crap.Now having tried many different distributions and kernels, i can confirm the bug still is there, and is making the notebook unusable. There's no 3D acceleration available at all on this GPU with KMS disabled. When playing a flash video it needs about 30 seconds fpr reaction if I clock some control with the mouse. Compiz or DirectX in Wine aren't working at all, and make the display crash. The GPU is wasting much energy and the notebook is running very hot, and overall just sluggish and not enjoyable in any fashion, I'd rather use my old Pentium M notebook, if it wasn't defective.
Please consider creating a solution fot this problem, as there's no single alternative for many Notebook owners, of expecially good notebooks (Thinkpad, Dell and more).
Problems with KMS enabled remain as before:
-iwl3945 WLAN gets slower and slower, until disconnect.
-heavy video (especially fullscreen) make the sound stutter in a fashion that makes it impossible to understand spoken word
Thanks,
Changed in xserver-xorg-driver-ati: | |
importance: | Medium → High |
In freedesktop.org Bugzilla #28106, Øyvind Stegard (oyvindstegard) wrote : | #67 |
Seems worse than ever on Ubuntu 11.10 just released (kernel 3.0, libdrm 2.4.26, xserver 1.10.4, using the new Unity-interface
In freedesktop.org Bugzilla #28106, Øyvind Stegard (oyvindstegard) wrote : | #68 |
Unity is sluggish on the X1400. Guess it's too old to cope now, with the latest desktop tech. Anyways, audio interruption is more or less constant after a while. Don't even need to move anything. Got these:
[ 931.698537] CE: hpet increased min_delta_ns to 515452 nsec
[ 1019.733804] CE: hpet increased min_delta_ns to 773178 nsec
[ 1023.203405] hrtimer: interrupt took 7398146 ns
[ 1171.028962] CE: hpet increased min_delta_ns to 1159767 nsec
In freedesktop.org Bugzilla #28106, Maciej Borzecki (maciek-borzecki) wrote : | #69 |
(In reply to comment #57)
> Unity is sluggish on the X1400. Guess it's too old to cope now, with the latest
> desktop tech.
Not really. Worked great with UMS. Compiz with way more advanced effects than fade in/out was smooth, same for ioquake running at decent framerate.
In freedesktop.org Bugzilla #28106, Tom Morton (tomm) wrote : | #70 |
I get this on my Thinkpad T60, Radeon X1300 running debian sid.
As well as crackle on the internal intel audio, I get even worse crackle and popping when using my Logitech V20 USB speakers.
The only thing that resolves the problem for me is:
echo mid > /sys/class/
But then gnome-shell and all 3d apps are really slow.
In freedesktop.org Bugzilla #28106, Steffen-schloenvoigt (steffen-schloenvoigt) wrote : | #71 |
Same problem on openSUSE 12.1 with lenovo T60, Radeon Mobility X1400
In freedesktop.org Bugzilla #28106, stevenb (stevenb) wrote : | #72 |
Hi
Jan Kouba put me on track to this bug-page. I don't know if "official" developers use this channel as a information or judgment source of bugs. As far as I know Ubuntu works on launchpad to administrate bugs.
For this problem I created https:/
keep fingers crossed
Quesst
In freedesktop.org Bugzilla #28106, Neven Klacar (nklacar) wrote : | #73 |
Looks like this will never get solved ;(
If anyone has ideas on how to debug this issue, I have a t60 that I can use.
In freedesktop.org Bugzilla #28106, Neven Klacar (nklacar) wrote : | #74 |
(In reply to comment #62)
> Looks like this will never get solved ;(
>
> If anyone has ideas on how to debug this issue, I have a t60 that I can use.
I tried enabling msi on alsa and its alot better. Still fulscreen is not good, but much sounds like 11.04
Add: options snd-hda-intel enable_msi=1" to the bottom of your /etc/modprobe.
I think radeon is somehow not playing nice with msi. If we could disable it it might fix the problem...I tried doing it with echo 0 > msi_bus in the radeon bridge but it wasnt working
In freedesktop.org Bugzilla #28106, agd5f (agd5f) wrote : | #75 |
With a new enough kernel, you can disable MSIs on radeon by setting radeon.msi=0 on the kernel command line in grub or when you load the module. You can disable MSIs globally by setting pci=nomsi on the kernel command line in grub.
In freedesktop.org Bugzilla #28106, agd5f (agd5f) wrote : | #76 |
You might also try this patch:
http://
In freedesktop.org Bugzilla #28106, Neven Klacar (nklacar) wrote : | #77 |
(In reply to comment #65)
> You might also try this patch:
> http://
I tried to git the 11.10 package from ubuntu and recompile with the change you mentioned in rs600.c file and r100.c . It didnt seem to help. I noticed someone tried disabling MSI so this might not be related to MSI at all...
I was thinking of trying the latest radeon src?
In freedesktop.org Bugzilla #28106, agd5f (agd5f) wrote : | #78 |
Has anyone tried messing with the audio or wifi drivers? It's possible the issue is on that side. How about messing with the cpufreq governors? Is it still an issue if you force the cpu power state to performance, etc.?
In freedesktop.org Bugzilla #28106, Neven Klacar (nklacar) wrote : | #79 |
The wifi I tried disabling the sound quaility is still bad when doing anything display intensive. I havent tried disabling alsa altogether to see if the wifi is still dropping..
I wanna say when I first come up with MSI fixed version it sounds fine, youtube also sounds normal, but if I make the unity taskbar show up, then it goes into some sort of bad state where sound is bad again..maybe the clock switch in the gpu clock or cpu? Not sure....
I need to do some more experiments, haven't had the time.
Øyvind Stegard (oyvindstegard) wrote : Re: Crackling sound with DVD playback on Lucid | #80 |
Probably good idea to set this older report as dupe of bug 879790, to consolidate all reports concerning this problem.
In freedesktop.org Bugzilla #28106, Michel Dänzer (michel-daenzer) wrote : | #81 |
According to bug 38694 there can be problems when changing the number of PCIe lanes. Does disabling that as described there help for this problem?
In freedesktop.org Bugzilla #28106, Kolin S. Murray (kolinab) wrote : | #82 |
Hi,
Apologies if this is not strictly on topic regarding fixing this bug - what I'm curious to know is what the 'best case' workaround all of you are using to avoid this problem? I'm open to absolutely any distribution, desktop environment, etc. Just wondering what the best alternative many of you have found to avoid the conflict and maintain the most functionality.
My best case options so far: Ubuntu 10.04 LTS where I don't remember noticing this problem, or even 12.04 in 2D if I could get my volume control buttons to work on my Thinkpad t60.
I'm also playing with arch to see if I can build something usable I like.
Regards,
K
penalvch (penalvch) wrote : Re: Crackling sound with DVD playback on Lucid | #83 |
Andreas Schiffer, could you please confirm this issue exists with the latest development release of Ubuntu? ISO images are available from http://
apport-collect -p alsa-driver 578342
tags: | added: latest-bios-1.25 |
no longer affects: | alsa-driver (Ubuntu) |
affects: | xserver-xorg-driver-ati → alsa-driver (Ubuntu) |
Changed in alsa-driver (Ubuntu): | |
importance: | High → Undecided |
status: | Confirmed → New |
status: | New → Incomplete |
tags: | added: regression-release |
summary: |
- Crackling sound with DVD playback on Lucid + [Fujitsu AMILO Xi 1554] Crackling sound with DVD playback on Lucid |
Andreas Schiffer (andreas-schiffer) wrote : | #84 |
Sorry, my Fujitsu notebook broke some time ago, and so I had to discard it.
This defect is nearly four years old, and unfortunately it lived longer than my hardware :)
penalvch (penalvch) wrote : | #85 |
Andreas Schiffer, this bug report is being closed due to your last comment https:/
Changed in alsa-driver (Ubuntu): | |
status: | Incomplete → Invalid |
I have somewhat similar hardware and have problems with crackling audio on Ubuntu Lucid when using radeon KMS. If I disable KMS the crackling goes away completely. Try booting with "radeon.modeset=0" parameter and see if that helps.