Okey, here is LSUSB: 
Bus 001 Device 003: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 056a:0319 Wacom Co., Ltd 
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
------------------------------------------
lspci -vvvnn:
00:00.0 Host bridge [0600]: NVIDIA Corporation MCP79 Host Bridge [10de:0a83] (rev b1)
	Subsystem: NVIDIA Corporation Device [10de:cb79]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:00.1 RAM memory [0500]: NVIDIA Corporation MCP79 Memory Controller [10de:0a88] (rev b1)
	Subsystem: NVIDIA Corporation Device [10de:cb79]
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:03.0 ISA bridge [0601]: NVIDIA Corporation MCP79 LPC Bridge [10de:0aae] (rev b3)
	Subsystem: ASUSTeK Computer Inc. Device [1043:1cf7]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: I/O ports at 4f00 [size=256]

00:03.1 RAM memory [0500]: NVIDIA Corporation MCP79 Memory Controller [10de:0aa4] (rev b1)
	Subsystem: ASUSTeK Computer Inc. Device [1043:1cf7]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:03.2 SMBus [0c05]: NVIDIA Corporation MCP79 SMBus [10de:0aa2] (rev b1)
	Subsystem: ASUSTeK Computer Inc. Device [1043:1cf7]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 14
	Region 0: I/O ports at 4900 [size=64]
	Region 4: I/O ports at 4d00 [size=64]
	Region 5: I/O ports at 4e00 [size=64]
	Capabilities: <access denied>
	Kernel driver in use: nForce2_smbus

00:03.3 RAM memory [0500]: NVIDIA Corporation MCP79 Memory Controller [10de:0a89] (rev b1)
	Subsystem: NVIDIA Corporation Device [10de:cb79]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:03.5 Co-processor [0b40]: NVIDIA Corporation MCP79 Co-processor [10de:0aa3] (rev b1)
	Subsystem: ASUSTeK Computer Inc. Device [1043:1cf7]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 21
	Region 0: Memory at fae80000 (32-bit, non-prefetchable) [size=512K]
	Kernel driver in use: nvidia

00:04.0 USB controller [0c03]: NVIDIA Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa5] (rev b1) (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:1cf7]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at fae7f000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci-pci

00:04.1 USB controller [0c03]: NVIDIA Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa6] (rev b1) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:1cf7]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 23
	Region 0: Memory at fae7ec00 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:08.0 Audio device [0403]: NVIDIA Corporation MCP79 High Definition Audio [10de:0ac0] (rev b1)
	Subsystem: ASUSTeK Computer Inc. Device [1043:16f3]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (500ns min, 1250ns max)
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at fae78000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:09.0 PCI bridge [0604]: NVIDIA Corporation MCP79 PCI Bridge [10de:0aab] (rev b1) (prog-if 01 [Subtractive decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fff00000-000fffff
	Prefetchable memory behind bridge: fff00000-000fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:0b.0 SATA controller [0106]: NVIDIA Corporation MCP79 AHCI Controller [10de:0ab9] (rev b1) (prog-if 01 [AHCI 1.0])
	Subsystem: ASUSTeK Computer Inc. Device [1043:1cf7]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 40
	Region 0: I/O ports at c080 [size=8]
	Region 1: I/O ports at c000 [size=4]
	Region 2: I/O ports at bc00 [size=8]
	Region 3: I/O ports at b880 [size=4]
	Region 4: I/O ports at b800 [size=16]
	Region 5: Memory at fae7c000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:0c.0 PCI bridge [0604]: NVIDIA Corporation MCP79 PCI Express Bridge [10de:0ac4] (rev b1) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fff00000-000fffff
	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP79 PCI Express Bridge [10de:0aa0] (rev b1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: faf00000-fbffffff
	Prefetchable memory behind bridge: 00000000e0000000-00000000f9ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:15.0 PCI bridge [0604]: NVIDIA Corporation MCP79 PCI Express Bridge [10de:0ac6] (rev b1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fea00000-feafffff
	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:16.0 PCI bridge [0604]: NVIDIA Corporation MCP79 PCI Express Bridge [10de:0ac7] (rev b1) (prog-if 00 [Normal decode])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: feb00000-febfffff
	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

03:00.0 VGA compatible controller [0300]: NVIDIA Corporation C79 [GeForce G102M] [10de:0873] (rev b1) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. GeForce G102M [1043:19b4]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at f8000000 (64-bit, prefetchable) [size=32M]
	Region 5: I/O ports at dc00 [size=128]
	[virtual] Expansion ROM at fafe0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nvidia

04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 01)
	Subsystem: ASUSTeK Computer Inc. U6V/U31J laptop [1043:16d5]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 41
	Region 0: I/O ports at e800 [size=256]
	Region 2: Memory at feaff000 (64-bit, non-prefetchable) [size=4K]
	Expansion ROM at feac0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: r8169

05:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
	Subsystem: AzureWave AW-NE785 / AW-NE785H 802.11bgn Wireless Full or Half-size Mini PCIe Card [1a3b:1089]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at febf0000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ath9k
-------------------------------------
and this is DMESG output:
[   24.010694] ath: regdomain 0x80cb updated by CountryIE
[   24.010699] ath: EEPROM regdomain: 0x80cb
[   24.010701] ath: EEPROM indicates we should expect a country code
[   24.010702] ath: doing EEPROM country->regdmn map search
[   24.010704] ath: country maps to regdmn code: 0x36
[   24.010705] ath: Country alpha2 being used: CZ
[   24.010707] ath: Regpair used: 0x36
[   24.010728] cfg80211: Regulatory domain changed to country: CZ
[   24.010729] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   24.010731] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   24.010734] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
[   24.010736] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   24.010738] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[   24.010740] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[   27.086248] init: mysql main process (997) terminated with status 1
[   27.086283] init: mysql main process ended, respawning
[   27.329405] init: mysql post-start process (998) terminated with status 1
[   27.339274] type=1400 audit(1389001268.013:82): apparmor="STATUS" operation="profile_replace" parent=1123 profile="unconfined" name="/usr/sbin/mysqld" pid=1127 comm="apparmor_parser"
[   27.398095] init: mysql main process (1131) terminated with status 1
[   27.398130] init: mysql main process ended, respawning
[   28.370008] init: mysql post-start process (1132) terminated with status 1
[   28.382394] type=1400 audit(1389001269.057:83): apparmor="STATUS" operation="profile_replace" parent=1207 profile="unconfined" name="/usr/sbin/mysqld" pid=1211 comm="apparmor_parser"
[   28.444410] init: mysql main process (1215) terminated with status 1
[   28.444445] init: mysql respawning too fast, stopped
[   34.614877] Ebtables v2.0 registered
[   35.365766] ip_tables: (C) 2000-2006 Netfilter Core Team
[   35.588500] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   39.416604] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.416664] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.416977] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.417027] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.417076] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.417124] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.417172] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.417220] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.885818] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.886187] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.886520] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.886851] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.887182] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.887513] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.887842] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.888191] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.888525] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.888857] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.889185] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.889513] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.889841] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.890172] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.890500] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.890829] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.891159] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.891488] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.891817] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.892163] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.892495] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.892823] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   39.893151] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   42.690728] init: plymouth-upstart-bridge main process (659) killed by TERM signal
[   43.544479] Bridge firewalling registered
[   44.691873] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   44.774552] postgres (1509): /proc/1509/oom_adj is deprecated, please use /proc/1509/oom_score_adj instead.
[   45.075979] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
[   81.622430] init: plymouth-stop pre-start process (2182) terminated with status 1
[  332.400405] Monitor-Mwait will be used to enter C-2 state
[  343.196500] perf samples too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[  353.420134] wlan0: deauthenticating from 80:b6:86:30:7a:f4 by local choice (reason=3)
[  353.432325] cfg80211: Calling CRDA to update world regulatory domain
[  353.440021] cfg80211: World regulatory domain updated:
[  353.440028] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  353.440031] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  353.440033] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  353.440035] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  353.440038] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  353.440040] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  358.629828] PM: Syncing filesystems ... done.
[  359.232467] PM: Preparing system for mem sleep
[  359.232887] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  359.234719] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  359.236145] PM: Entering mem sleep
[  359.236186] Suspending console(s) (use no_console_suspend to debug)
[  359.236688] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  359.280125] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D3cold
[  359.344189] sd 0:0:0:0: [sda] Stopping disk
[  359.856154] PM: suspend of devices complete after 619.598 msecs
[  359.856452] PM: late suspend of devices complete after 0.294 msecs
[  359.872085] pcieport 0000:00:15.0: System wakeup enabled by ACPI
[  359.888381] ehci-pci 0000:00:04.1: System wakeup enabled by ACPI
[  359.904041] ohci-pci 0000:00:04.0: System wakeup enabled by ACPI
[  359.920264] PM: noirq suspend of devices complete after 63.809 msecs
[  359.920529] ACPI: Preparing to enter system sleep state S3
[  359.921941] PM: Saving platform NVS memory
[  359.922225] Disabling non-boot CPUs ...
[  359.922554] Broke affinity for irq 18
[  360.024020] smpboot: CPU 1 is now offline
[  360.024320] ACPI: Low-level resume complete
[  360.024320] PM: Restoring platform NVS memory
[  360.024320] Enabling non-boot CPUs ...
[  360.024320] smpboot: Booting Node 0 Processor 1 APIC 0x1
[  360.036157] CPU1 is up
[  360.037649] ACPI: Waking up from system sleep state S3
[  360.396056] ohci-pci 0000:00:04.0: System wakeup disabled by ACPI
[  360.412077] ehci-pci 0000:00:04.1: System wakeup disabled by ACPI
[  360.412097] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
[  360.476344] PM: noirq resume of devices complete after 96.115 msecs
[  360.476503] PM: early resume of devices complete after 0.131 msecs
[  360.476645] ohci-pci 0000:00:04.0: setting latency timer to 64
[  360.476678] pci 0000:00:09.0: setting latency timer to 64
[  360.476687] pci 0000:00:10.0: setting latency timer to 64
[  360.476690] ahci 0000:00:0b.0: setting latency timer to 64
[  360.477296] pcieport 0000:00:15.0: System wakeup disabled by ACPI
[  360.477973] ehci-pci 0000:00:04.1: setting latency timer to 64
[  360.478044] snd_hda_intel 0000:00:08.0: setting latency timer to 64
[  360.796035] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  360.798502] ata2.00: configured for UDMA/100
[  361.692024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  361.694629] ata1.00: configured for UDMA/100
[  361.694971] sd 0:0:0:0: [sda] Starting disk
[  361.709031] PM: resume of devices complete after 1232.525 msecs
[  361.709338] PM: Finishing wakeup.
[  361.709339] Restarting tasks ... done.
[  361.716313] video LNXVIDEO:00: Restoring backlight state
[  362.689319] r8169 0000:04:00.0 eth0: link down
[  362.689376] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  362.760160] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  364.798899] wlan0: authenticate with 80:b6:86:30:7a:f4
[  364.815683] wlan0: send auth to 80:b6:86:30:7a:f4 (try 1/3)
[  364.817677] wlan0: authenticated
[  364.818312] ath9k 0000:05:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[  364.820155] wlan0: associate with 80:b6:86:30:7a:f4 (try 1/3)
[  364.824144] wlan0: RX AssocResp from 80:b6:86:30:7a:f4 (capab=0x411 status=0 aid=2)
[  364.824345] wlan0: associated
[  364.824377] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  364.824493] cfg80211: Calling CRDA for country: CZ
[  364.828524] ath: regdomain 0x80cb updated by CountryIE
[  364.828529] ath: EEPROM regdomain: 0x80cb
[  364.828530] ath: EEPROM indicates we should expect a country code
[  364.828532] ath: doing EEPROM country->regdmn map search
[  364.828534] ath: country maps to regdmn code: 0x36
[  364.828536] ath: Country alpha2 being used: CZ
[  364.828537] ath: Regpair used: 0x36
[  364.828561] cfg80211: Regulatory domain changed to country: CZ
[  364.828563] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  364.828565] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  364.828567] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
[  364.828569] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  364.828572] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[  364.828574] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[  382.792052] usb 2-4: new full-speed USB device number 3 using ohci-pci
[  383.012064] usb 2-4: New USB device found, idVendor=04b8, idProduct=0841
[  383.012070] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  383.012073] usb 2-4: Product: USB MFP
[  383.012076] usb 2-4: Manufacturer: SEIKO EPSON
[  383.012078] usb 2-4: SerialNumber: KQHZ658378
[  383.105596] WARNING! power/level is deprecated; use power/control instead
[  383.169398] usblp 2-4:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0841
[  383.169793] usbcore: registered new interface driver usblp
[  385.018555] usblp0: removed
[  385.041464] usblp 2-4:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0841
[  422.843122] usblp0: removed
[  465.664750] usblp 2-4:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0841
[  603.285383] usb 2-4: USB disconnect, device number 3
[  603.286007] usblp0: removed
[  635.117046] wlan0: deauthenticating from 80:b6:86:30:7a:f4 by local choice (reason=3)
[  635.962258] cfg80211: Calling CRDA to update world regulatory domain
[  635.969571] cfg80211: World regulatory domain updated:
[  635.969575] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  635.969578] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  635.969581] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  635.969583] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  635.969585] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  635.969587] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  640.687185] PM: Syncing filesystems ... done.
[  640.997193] PM: Preparing system for mem sleep
[  640.997435] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  640.999259] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[  641.000250] PM: Entering mem sleep
[  641.000289] Suspending console(s) (use no_console_suspend to debug)
[  641.016542] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  641.054019] sd 0:0:0:0: [sda] Stopping disk
[  641.060112] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D3cold
[  641.596159] PM: suspend of devices complete after 579.744 msecs
[  641.596415] PM: late suspend of devices complete after 0.253 msecs
[  641.628396] ehci-pci 0000:00:04.1: System wakeup enabled by ACPI
[  641.644048] ohci-pci 0000:00:04.0: System wakeup enabled by ACPI
[  641.660272] PM: noirq suspend of devices complete after 63.854 msecs
[  641.660538] ACPI: Preparing to enter system sleep state S3
[  641.661913] PM: Saving platform NVS memory
[  641.662207] Disabling non-boot CPUs ...
[  641.764049] smpboot: CPU 1 is now offline
[  641.764309] ACPI: Low-level resume complete
[  641.764309] PM: Restoring platform NVS memory
[  641.764309] Enabling non-boot CPUs ...
[  641.764309] smpboot: Booting Node 0 Processor 1 APIC 0x1
[  641.776138] CPU1 is up
[  641.777633] ACPI: Waking up from system sleep state S3
[  642.136099] ohci-pci 0000:00:04.0: System wakeup disabled by ACPI
[  642.152063] ehci-pci 0000:00:04.1: System wakeup disabled by ACPI
[  642.152083] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
[  642.216352] PM: noirq resume of devices complete after 96.104 msecs
[  642.216511] PM: early resume of devices complete after 0.131 msecs
[  642.216675] pci 0000:00:09.0: setting latency timer to 64
[  642.216686] ahci 0000:00:0b.0: setting latency timer to 64
[  642.216700] pci 0000:00:10.0: setting latency timer to 64
[  642.220707] ohci-pci 0000:00:04.0: setting latency timer to 64
[  642.220792] ehci-pci 0000:00:04.1: setting latency timer to 64
[  642.220855] snd_hda_intel 0000:00:08.0: setting latency timer to 64
[  642.540041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  642.542522] ata2.00: configured for UDMA/100
[  643.492077] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  643.494764] ata1.00: configured for UDMA/100
[  643.495128] sd 0:0:0:0: [sda] Starting disk
[  643.505668] PM: resume of devices complete after 1289.151 msecs
[  643.506011] PM: Finishing wakeup.
[  643.506013] Restarting tasks ... done.
[  643.538451] video LNXVIDEO:00: Restoring backlight state
[  643.864053] usb 2-4: new low-speed USB device number 4 using ohci-pci
[  644.080069] usb 2-4: New USB device found, idVendor=1bcf, idProduct=000a
[  644.080075] usb 2-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[  644.080078] usb 2-4: Product: USB Laser Wheel Mouse
[  644.225382] r8169 0000:04:00.0 eth0: link down
[  644.225528] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  644.257186] input: USB Laser Wheel Mouse as /devices/pci0000:00/0000:00:04.0/usb2/2-4/2-4:1.0/input/input11
[  644.274961] hid-generic 0003:1BCF:000A.0001: input,hiddev0,hidraw0: USB HID v1.11 Mouse [USB Laser Wheel Mouse] on usb-0000:00:04.0-4/input0
[  644.296410] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  646.318434] wlan0: authenticate with 80:b6:86:30:7a:f4
[  646.343538] wlan0: send auth to 80:b6:86:30:7a:f4 (try 1/3)
[  646.366313] wlan0: authenticated
[  646.366557] ath9k 0000:05:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[  646.368059] wlan0: associate with 80:b6:86:30:7a:f4 (try 1/3)
[  646.394195] wlan0: RX AssocResp from 80:b6:86:30:7a:f4 (capab=0x411 status=0 aid=2)
[  646.394408] wlan0: associated
[  646.394452] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  646.394581] cfg80211: Calling CRDA for country: CZ
[  646.398429] ath: regdomain 0x80cb updated by CountryIE
[  646.398434] ath: EEPROM regdomain: 0x80cb
[  646.398436] ath: EEPROM indicates we should expect a country code
[  646.398438] ath: doing EEPROM country->regdmn map search
[  646.398439] ath: country maps to regdmn code: 0x36
[  646.398441] ath: Country alpha2 being used: CZ
[  646.398442] ath: Regpair used: 0x36
[  646.398465] cfg80211: Regulatory domain changed to country: CZ
[  646.398467] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  646.398469] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  646.398472] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
[  646.398474] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  646.398476] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[  646.398478] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[  659.616290] wlan0: deauthenticating from 80:b6:86:30:7a:f4 by local choice (reason=3)
[  659.630004] cfg80211: Calling CRDA to update world regulatory domain
[  659.637174] cfg80211: World regulatory domain updated:
[  659.637181] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  659.637184] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  659.637186] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  659.637188] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  659.637190] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  659.637193] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  665.471902] PM: Syncing filesystems ... done.
[  665.827886] PM: Preparing system for mem sleep
[  665.828422] Freezing user space processes ... (elapsed 0.002 seconds) done.
[  665.830459] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  665.831852] PM: Entering mem sleep
[  665.831891] Suspending console(s) (use no_console_suspend to debug)
[  665.832435] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  665.876163] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D3cold
[  665.955121] sd 0:0:0:0: [sda] Stopping disk
[  666.468135] PM: suspend of devices complete after 635.850 msecs
[  666.468411] PM: late suspend of devices complete after 0.272 msecs
[  666.484087] pcieport 0000:00:15.0: System wakeup enabled by ACPI
[  666.500380] ehci-pci 0000:00:04.1: System wakeup enabled by ACPI
[  666.516040] ohci-pci 0000:00:04.0: System wakeup enabled by ACPI
[  666.532264] PM: noirq suspend of devices complete after 63.850 msecs
[  666.532530] ACPI: Preparing to enter system sleep state S3
[  666.535026] PM: Saving platform NVS memory
[  666.535321] Disabling non-boot CPUs ...
[  666.536630] smpboot: CPU 1 is now offline
[  666.536936] ACPI: Low-level resume complete
[  666.536936] PM: Restoring platform NVS memory
[  666.536936] Enabling non-boot CPUs ...
[  666.536936] smpboot: Booting Node 0 Processor 1 APIC 0x1
[  666.548753] CPU1 is up
[  666.550244] ACPI: Waking up from system sleep state S3
[  666.908093] ohci-pci 0000:00:04.0: System wakeup disabled by ACPI
[  666.924110] ehci-pci 0000:00:04.1: System wakeup disabled by ACPI
[  666.924133] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
[  666.988349] PM: noirq resume of devices complete after 96.119 msecs
[  666.988511] PM: early resume of devices complete after 0.135 msecs
[  666.988654] ohci-pci 0000:00:04.0: setting latency timer to 64
[  666.988688] pci 0000:00:09.0: setting latency timer to 64
[  666.988697] pci 0000:00:10.0: setting latency timer to 64
[  666.988699] ahci 0000:00:0b.0: setting latency timer to 64
[  666.992121] pcieport 0000:00:15.0: System wakeup disabled by ACPI
[  666.992799] ehci-pci 0000:00:04.1: setting latency timer to 64
[  666.992870] snd_hda_intel 0000:00:08.0: setting latency timer to 64
[  667.312033] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  667.314500] ata2.00: configured for UDMA/100
[  668.264023] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  668.266625] ata1.00: configured for UDMA/100
[  668.266967] sd 0:0:0:0: [sda] Starting disk
[  668.278095] PM: resume of devices complete after 1289.579 msecs
[  668.278396] PM: Finishing wakeup.
[  668.278398] Restarting tasks ... done.
[  668.288523] video LNXVIDEO:00: Restoring backlight state
[  669.557353] r8169 0000:04:00.0 eth0: link down
[  669.557415] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  669.633552] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  671.623104] wlan0: authenticate with 80:b6:86:30:7a:f4
[  671.639775] wlan0: send auth to 80:b6:86:30:7a:f4 (try 1/3)
[  671.643044] wlan0: authenticated
[  671.643289] ath9k 0000:05:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[  671.644067] wlan0: associate with 80:b6:86:30:7a:f4 (try 1/3)
[  671.646797] wlan0: RX AssocResp from 80:b6:86:30:7a:f4 (capab=0x411 status=0 aid=2)
[  671.646995] wlan0: associated
[  671.647031] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  671.647142] cfg80211: Calling CRDA for country: CZ
[  671.660945] ath: regdomain 0x80cb updated by CountryIE
[  671.660951] ath: EEPROM regdomain: 0x80cb
[  671.660953] ath: EEPROM indicates we should expect a country code
[  671.660954] ath: doing EEPROM country->regdmn map search
[  671.660956] ath: country maps to regdmn code: 0x36
[  671.660958] ath: Country alpha2 being used: CZ
[  671.660959] ath: Regpair used: 0x36
[  671.660986] cfg80211: Regulatory domain changed to country: CZ
[  671.660987] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  671.660990] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  671.660992] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
[  671.660994] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  671.660996] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[  671.660998] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[  848.500143] perf samples too long (5004 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[ 4220.586432] traps: gdbus[5452] trap int3 ip:7f3f9bae93d9 sp:7f3f96b218d0 error:0
[ 8309.519413] usb 2-4: USB disconnect, device number 4
[22321.709536] systemd-hostnamed[23745]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[36381.881222] wlan0: deauthenticating from 80:b6:86:30:7a:f4 by local choice (reason=3)
[36383.375609] cfg80211: Calling CRDA to update world regulatory domain
[36384.319973] cfg80211: World regulatory domain updated:
[36384.319979] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[36384.319983] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36384.319986] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36384.319989] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[36384.319991] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36384.319994] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36389.783497] traps: gnome-shell[2555] trap int3 ip:7f07821273d9 sp:7fffd9b64fb0 error:0
[36389.868605] PM: Syncing filesystems ... done.
[36390.233112] PM: Preparing system for mem sleep
[36390.233295] Freezing user space processes ... (elapsed 0.921 seconds) done.
[36391.154810] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[36391.156188] PM: Entering mem sleep
[36391.156221] Suspending console(s) (use no_console_suspend to debug)
[36391.156708] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[36391.200108] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D3cold
[36391.239225] sd 0:0:0:0: [sda] Stopping disk
[36391.764141] PM: suspend of devices complete after 607.559 msecs
[36391.764406] PM: late suspend of devices complete after 0.260 msecs
[36391.780087] pcieport 0000:00:15.0: System wakeup enabled by ACPI
[36391.796374] ehci-pci 0000:00:04.1: System wakeup enabled by ACPI
[36391.812040] ohci-pci 0000:00:04.0: System wakeup enabled by ACPI
[36391.828265] PM: noirq suspend of devices complete after 63.856 msecs
[36391.828530] ACPI: Preparing to enter system sleep state S3
[36391.829934] PM: Saving platform NVS memory
[36391.830232] Disabling non-boot CPUs ...
[36391.932018] smpboot: CPU 1 is now offline
[36391.932276] ACPI: Low-level resume complete
[36391.932276] PM: Restoring platform NVS memory
[36391.932276] Enabling non-boot CPUs ...
[36391.932276] smpboot: Booting Node 0 Processor 1 APIC 0x1
[36391.944164] CPU1 is up
[36391.945671] ACPI: Waking up from system sleep state S3
[36392.304073] ohci-pci 0000:00:04.0: System wakeup disabled by ACPI
[36392.320064] ehci-pci 0000:00:04.1: System wakeup disabled by ACPI
[36392.320084] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
[36392.384345] PM: noirq resume of devices complete after 96.105 msecs
[36392.384503] PM: early resume of devices complete after 0.131 msecs
[36392.384646] ohci-pci 0000:00:04.0: setting latency timer to 64
[36392.384715] ehci-pci 0000:00:04.1: setting latency timer to 64
[36392.384739] pci 0000:00:09.0: setting latency timer to 64
[36392.384748] pci 0000:00:10.0: setting latency timer to 64
[36392.384750] ahci 0000:00:0b.0: setting latency timer to 64
[36392.384765] pcieport 0000:00:15.0: System wakeup disabled by ACPI
[36392.385498] snd_hda_intel 0000:00:08.0: setting latency timer to 64
[36392.704050] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[36392.706571] ata2.00: configured for UDMA/100
[36393.656043] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[36393.658735] ata1.00: configured for UDMA/100
[36393.659102] sd 0:0:0:0: [sda] Starting disk
[36393.663679] PM: resume of devices complete after 1279.171 msecs
[36393.664032] PM: Finishing wakeup.
[36393.664034] Restarting tasks ... done.
[36393.714936] video LNXVIDEO:00: Restoring backlight state
[36395.185288] r8169 0000:04:00.0 eth0: link down
[36395.185351] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[36395.265542] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[36395.791661] r8169 0000:04:00.0 eth0: link down
[36395.791761] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[36395.875365] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[36398.519201] wlan0: authenticate with 70:71:bc:13:ce:a7
[36398.529088] wlan0: send auth to 70:71:bc:13:ce:a7 (try 1/3)
[36398.532051] wlan0: authenticated
[36398.536058] wlan0: associate with 70:71:bc:13:ce:a7 (try 1/3)
[36398.540089] wlan0: RX AssocResp from 70:71:bc:13:ce:a7 (capab=0x411 status=0 aid=7)
[36398.540296] wlan0: associated
[36398.540341] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready


i think, DMESG ca'nt show me complete output, is this inclomplete output ok?


When i'm was install your edited kernel, I wasn't compile input-wacom and xf86 driver. Will i do it after every kernel upgrade?