[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-17-generic (buildd@allspice) (gcc version 4.6.2 (Ubuntu/Linaro 4.6.2-16ubuntu1) ) #27-Ubuntu SMP Fri Feb 24 15:37:36 UTC 2012 (Ubuntu 3.2.0-17.27-generic 3.2.6) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-17-generic root=UUID=dd06ade6-b2e4-4133-9095-abf5c0073779 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable) [ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffc5400 (reserved) [ 0.000000] BIOS-e820: 00000000bffc5400 - 00000000bffe7fb8 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bffe7fb8 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Hewlett-Packard HP Compaq 6910p/30C1, BIOS 68MCD Ver. F.15 06/14/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 13C000000 mask FFC000000 uncachable [ 0.000000] 4 base 0FEDA0000 mask FFFFE0000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 4GB, range: 1GB, type WB [ 0.000000] reg 3, base: 5056MB, range: 64MB, type UC [ 0.000000] reg 4, base: 4175488KB, range: 128KB, type UC [ 0.000000] total RAM covered: 4032M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 4GB, range: 1GB, type WB [ 0.000000] reg 3, base: 5056MB, range: 64MB, type UC [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbffb0 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bffb0000 [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bffb0000 page 4k [ 0.000000] kernel direct mapping tables up to bffb0000 @ 1fffb000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000013c000000 [ 0.000000] 0100000000 - 013c000000 page 2M [ 0.000000] kernel direct mapping tables up to 13c000000 @ bffaa000-bffb0000 [ 0.000000] RAMDISK: 35728000 - 36b8c000 [ 0.000000] ACPI: RSDP 00000000000f7a30 00024 (v02 HP ) [ 0.000000] ACPI: XSDT 00000000bffc81cc 00084 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: FACP 00000000bffc8084 000F4 (v04 HP 30C1 00000003 HP 00000001) [ 0.000000] ACPI: DSDT 00000000bffc8544 12D96 (v01 HP nc65xx 00010000 MSFT 03000001) [ 0.000000] ACPI: FACS 00000000bffe7d80 00040 [ 0.000000] ACPI: SLIC 00000000bffc8250 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: HPET 00000000bffc83c8 00038 (v01 HP 30C1 00000001 HP 00000001) [ 0.000000] ACPI: APIC 00000000bffc8400 00068 (v01 HP 30C1 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 00000000bffc8468 0003C (v01 HP 30C1 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 00000000bffc84a4 00032 (v02 HP 30C1 00000001 HP 00000001) [ 0.000000] ACPI: ASF! 00000000bffc84d8 00069 (v16 HP CHIMAYU 00000001 HP 00000000) [ 0.000000] ACPI: SSDT 00000000bffdb2da 0032F (v01 HP HPQSAT 00000001 MSFT 03000001) [ 0.000000] ACPI: SSDT 00000000bffdb609 0014E (v01 HP HPQPRN 00000001 MSFT 03000001) [ 0.000000] ACPI: SSDT 00000000bffdc15f 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317) [ 0.000000] ACPI: SSDT 00000000bffdc3be 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317) [ 0.000000] ACPI: SSDT 00000000bffdc464 004D7 (v01 HP CpuPm 00003000 INTL 20060317) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000013c000000 [ 0.000000] Initmem setup node 0 0000000000000000-000000013c000000 [ 0.000000] NODE_DATA [000000013bffb000 - 000000013bffffff] [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff880137600000-ffff88013b5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0013c000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bffb0 [ 0.000000] 0: 0x00100000 -> 0x0013c000 [ 0.000000] On node 0 totalpages: 1031999 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3914 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 765936 pages, LIFO batch:31 [ 0.000000] Normal zone: 3840 pages used for memmap [ 0.000000] Normal zone: 241920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bffb0000 - 00000000bffc5000 [ 0.000000] PM: Registered nosave memory: 00000000bffc5000 - 00000000bffc6000 [ 0.000000] PM: Registered nosave memory: 00000000bffc6000 - 00000000bffe7000 [ 0.000000] PM: Registered nosave memory: 00000000bffe7000 - 00000000bffe8000 [ 0.000000] PM: Registered nosave memory: 00000000bffe8000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed9a000 [ 0.000000] PM: Registered nosave memory: 00000000fed9a000 - 00000000feda0000 [ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000fedc0000 [ 0.000000] PM: Registered nosave memory: 00000000fedc0000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000 [ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013bc00000 s83072 r8192 d23424 u1048576 [ 0.000000] pcpu-alloc: s83072 r8192 d23424 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1011770 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-17-generic root=UUID=dd06ade6-b2e4-4133-9095-abf5c0073779 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3959468k/5177344k available (6552k kernel code, 1049348k absent, 168528k reserved, 6650k data, 920k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2393.998 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.99 BogoMIPS (lpj=9575992) [ 0.004008] pid_max: default: 32768 minimum: 301 [ 0.004032] Security Framework initialized [ 0.004050] AppArmor: AppArmor initialized [ 0.004051] Yama: becoming mindful. [ 0.005054] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.008835] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.009984] Mount-cache hash table entries: 256 [ 0.010140] Initializing cgroup subsys cpuacct [ 0.010145] Initializing cgroup subsys memory [ 0.010155] Initializing cgroup subsys devices [ 0.010157] Initializing cgroup subsys freezer [ 0.010158] Initializing cgroup subsys blkio [ 0.010165] Initializing cgroup subsys perf_event [ 0.010198] CPU: Physical Processor ID: 0 [ 0.010200] CPU: Processor Core ID: 0 [ 0.010202] mce: CPU supports 6 MCE banks [ 0.010211] CPU0: Thermal monitoring enabled (TM2) [ 0.010215] using mwait in idle threads. [ 0.012647] ACPI: Core revision 20110623 [ 0.020014] ftrace: allocating 27009 entries in 106 pages [ 0.024474] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.064509] CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [ 0.068003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.068003] ... version: 2 [ 0.068003] ... bit width: 40 [ 0.068003] ... generic registers: 2 [ 0.068003] ... value mask: 000000ffffffffff [ 0.068003] ... max period: 000000007fffffff [ 0.068003] ... fixed-purpose events: 3 [ 0.068003] ... event mask: 0000000700000003 [ 0.068003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.068003] Booting Node 0, Processors #1 Ok. [ 0.068003] smpboot cpu 1: start_ip = 9a000 [ 0.156039] NMI watchdog enabled, takes one hw-pmu counter. [ 0.156083] Brought up 2 CPUs [ 0.156086] Total of 2 processors activated (9575.94 BogoMIPS). [ 0.157948] devtmpfs: initialized [ 0.157948] EVM: security.selinux [ 0.157948] EVM: security.SMACK64 [ 0.157948] EVM: security.capability [ 0.157948] PM: Registering ACPI NVS region at bffc5400 (142264 bytes) [ 0.157948] print_constraints: dummy: [ 0.157948] RTC time: 17:31:50, date: 03/03/12 [ 0.157948] NET: Registered protocol family 16 [ 0.160053] Trying to unpack rootfs image as initramfs... [ 0.160036] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.160036] ACPI: bus type pci registered [ 0.160097] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.160100] PCI: not using MMCONFIG [ 0.160102] PCI: Using configuration type 1 for base access [ 0.161088] bio: create slab at 0 [ 0.161166] ACPI: Added _OSI(Module Device) [ 0.161169] ACPI: Added _OSI(Processor Device) [ 0.161170] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.161172] ACPI: Added _OSI(Processor Aggregator Device) [ 0.162751] ACPI: EC: Look up EC in DSDT [ 0.197334] ACPI: SSDT 00000000bffdb81f 002C1 (v01 HP Cpu0Ist 00003000 INTL 20060317) [ 0.197720] ACPI: Dynamic OEM Table Load: [ 0.197723] ACPI: SSDT (null) 002C1 (v01 HP Cpu0Ist 00003000 INTL 20060317) [ 0.197821] ACPI: SSDT 00000000bffdbb65 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317) [ 0.198187] ACPI: Dynamic OEM Table Load: [ 0.198190] ACPI: SSDT (null) 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317) [ 0.198357] ACPI: SSDT 00000000bffdb757 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317) [ 0.198730] ACPI: Dynamic OEM Table Load: [ 0.198733] ACPI: SSDT (null) 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317) [ 0.198796] ACPI: SSDT 00000000bffdbae0 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317) [ 0.199161] ACPI: Dynamic OEM Table Load: [ 0.199164] ACPI: SSDT (null) 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317) [ 0.228083] ACPI: Interpreter enabled [ 0.228089] ACPI: (supports S0 S3 S4 S5) [ 0.228107] ACPI: Using IOAPIC for interrupt routing [ 0.228136] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.228633] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.240759] ACPI: Power Resource [C229] (on) [ 0.241121] ACPI: Power Resource [C230] (on) [ 0.241718] ACPI: Power Resource [C24C] (on) [ 0.244142] ACPI: Power Resource [C173] (off) [ 0.245814] ACPI: Power Resource [C359] (off) [ 0.245868] ACPI: Power Resource [C35C] (off) [ 0.245918] ACPI: Power Resource [C35D] (off) [ 0.245971] ACPI: Power Resource [C35E] (off) [ 0.246024] ACPI: Power Resource [C35F] (off) [ 0.246059] ACPI: Power Resource [C360] (off) [ 0.246525] ACPI: Power Resource [C379] (off) [ 0.246580] ACPI: Power Resource [C37A] (off) [ 0.246632] ACPI: Power Resource [C37B] (off) [ 0.246687] ACPI: Power Resource [C37C] (off) [ 0.246740] ACPI: Power Resource [C37D] (off) [ 0.247264] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.247495] ACPI: No dock devices found. [ 0.247497] HEST: Table not found. [ 0.247501] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.250052] ACPI: PCI Root Bridge [C003] (domain 0000 [bus 00-ff]) [ 0.254310] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.254313] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.254315] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.254318] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfedfffff] [ 0.254320] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff] [ 0.254322] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.254337] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 [ 0.254385] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604 [ 0.254426] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.254429] pci 0000:00:01.0: PME# disabled [ 0.254458] pci 0000:00:03.0: [8086:2a04] type 0 class 0x000780 [ 0.254496] pci 0000:00:03.0: reg 10: [mem 0xd8500000-0xd850000f 64bit] [ 0.254626] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.254631] pci 0000:00:03.0: PME# disabled [ 0.254653] pci 0000:00:03.2: [8086:2a06] type 0 class 0x000101 [ 0.254673] pci 0000:00:03.2: reg 10: [io 0x5000-0x5007] [ 0.254682] pci 0000:00:03.2: reg 14: [io 0x5008-0x500b] [ 0.254691] pci 0000:00:03.2: reg 18: [io 0x5010-0x5017] [ 0.254700] pci 0000:00:03.2: reg 1c: [io 0x5018-0x501b] [ 0.254708] pci 0000:00:03.2: reg 20: [io 0x5020-0x502f] [ 0.254774] pci 0000:00:03.3: [8086:2a07] type 0 class 0x000700 [ 0.254790] pci 0000:00:03.3: reg 10: [io 0x5030-0x5037] [ 0.254797] pci 0000:00:03.3: reg 14: [mem 0xd8501000-0xd8501fff] [ 0.254989] pci 0000:00:19.0: [8086:1049] type 0 class 0x000200 [ 0.255012] pci 0000:00:19.0: reg 10: [mem 0xd8520000-0xd853ffff] [ 0.255025] pci 0000:00:19.0: reg 14: [mem 0xd8540000-0xd8540fff] [ 0.255037] pci 0000:00:19.0: reg 18: [io 0x5040-0x505f] [ 0.255124] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.255129] pci 0000:00:19.0: PME# disabled [ 0.255147] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 [ 0.255203] pci 0000:00:1a.0: reg 20: [io 0x5060-0x507f] [ 0.255248] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 [ 0.255304] pci 0000:00:1a.1: reg 20: [io 0x5080-0x509f] [ 0.255362] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 [ 0.255386] pci 0000:00:1a.7: reg 10: [mem 0xd8541000-0xd85413ff] [ 0.255494] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.255499] pci 0000:00:1a.7: PME# disabled [ 0.255530] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 [ 0.255552] pci 0000:00:1b.0: reg 10: [mem 0xd8544000-0xd8547fff 64bit] [ 0.255656] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.255661] pci 0000:00:1b.0: PME# disabled [ 0.255690] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 [ 0.255800] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.255805] pci 0000:00:1c.0: PME# disabled [ 0.255839] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 [ 0.255950] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.255955] pci 0000:00:1c.1: PME# disabled [ 0.255990] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604 [ 0.256114] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.256119] pci 0000:00:1c.4: PME# disabled [ 0.256150] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 [ 0.256206] pci 0000:00:1d.0: reg 20: [io 0x50a0-0x50bf] [ 0.256249] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 [ 0.256305] pci 0000:00:1d.1: reg 20: [io 0x50c0-0x50df] [ 0.256347] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 [ 0.256405] pci 0000:00:1d.2: reg 20: [io 0x50e0-0x50ff] [ 0.256462] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 [ 0.256486] pci 0000:00:1d.7: reg 10: [mem 0xd8548000-0xd85483ff] [ 0.256592] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.256598] pci 0000:00:1d.7: PME# disabled [ 0.256621] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.256720] pci 0000:00:1f.0: [8086:2811] type 0 class 0x000601 [ 0.256834] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.256840] pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH6 GPIO [ 0.256845] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f) [ 0.256849] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0100 (mask 000f) [ 0.256855] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007) [ 0.256916] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101 [ 0.256932] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.256944] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.256957] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.256969] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.256981] pci 0000:00:1f.1: reg 20: [io 0x5100-0x510f] [ 0.257035] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106 [ 0.257062] pci 0000:00:1f.2: reg 10: [io 0x13f0-0x13f7] [ 0.257074] pci 0000:00:1f.2: reg 14: [io 0x15f4-0x15f7] [ 0.257086] pci 0000:00:1f.2: reg 18: [io 0x1370-0x1377] [ 0.257098] pci 0000:00:1f.2: reg 1c: [io 0x1574-0x1577] [ 0.257110] pci 0000:00:1f.2: reg 20: [io 0x5140-0x515f] [ 0.257122] pci 0000:00:1f.2: reg 24: [mem 0xd8549000-0xd85497ff] [ 0.257190] pci 0000:00:1f.2: PME# supported from D3hot [ 0.257195] pci 0000:00:1f.2: PME# disabled [ 0.257268] pci 0000:01:00.0: [1002:7188] type 0 class 0x000300 [ 0.257288] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd3ffffff pref] [ 0.257303] pci 0000:01:00.0: reg 14: [io 0x4000-0x40ff] [ 0.257319] pci 0000:01:00.0: reg 18: [mem 0xd8400000-0xd840ffff] [ 0.257366] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.257443] pci 0000:01:00.0: supports D1 D2 [ 0.257466] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.257482] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.257485] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.257488] pci 0000:00:01.0: bridge window [mem 0xd8400000-0xd84fffff] [ 0.257492] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd3ffffff 64bit pref] [ 0.257552] pci 0000:00:1c.0: PCI bridge to [bus 08-08] [ 0.257681] pci 0000:10:00.0: [8086:4229] type 0 class 0x000280 [ 0.257738] pci 0000:10:00.0: reg 10: [mem 0xd8000000-0xd8001fff 64bit] [ 0.257950] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold [ 0.257960] pci 0000:10:00.0: PME# disabled [ 0.264069] pci 0000:00:1c.1: PCI bridge to [bus 10-10] [ 0.264077] pci 0000:00:1c.1: bridge window [mem 0xd8000000-0xd80fffff] [ 0.264144] pci 0000:00:1c.4: PCI bridge to [bus 28-28] [ 0.264149] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff] [ 0.264154] pci 0000:00:1c.4: bridge window [mem 0xd4000000-0xd7ffffff] [ 0.264220] pci 0000:02:06.0: [1180:0476] type 2 class 0x000607 [ 0.264245] pci 0000:02:06.0: proprietary Ricoh MMC controller disabled (via cardbus function) [ 0.264247] pci 0000:02:06.0: MMC cards are now supported by standard SDHCI controller [ 0.264266] pci 0000:02:06.0: reg 10: [mem 0xd8100000-0xd8100fff] [ 0.264311] pci 0000:02:06.0: supports D1 D2 [ 0.264313] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.264319] pci 0000:02:06.0: PME# disabled [ 0.264343] pci 0000:02:06.1: [1180:0476] type 2 class 0x000607 [ 0.264371] pci 0000:02:06.1: reg 10: [mem 0xd8101000-0xd8101fff] [ 0.264415] pci 0000:02:06.1: supports D1 D2 [ 0.264417] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.264422] pci 0000:02:06.1: PME# disabled [ 0.264447] pci 0000:02:06.2: [1180:0832] type 0 class 0x000c00 [ 0.264474] pci 0000:02:06.2: reg 10: [mem 0xd8102000-0xd81027ff] [ 0.264595] pci 0000:02:06.2: supports D1 D2 [ 0.264597] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.264603] pci 0000:02:06.2: PME# disabled [ 0.264628] pci 0000:02:06.3: [1180:0822] type 0 class 0x000805 [ 0.264655] pci 0000:02:06.3: reg 10: [mem 0xd8103000-0xd81030ff] [ 0.264776] pci 0000:02:06.3: supports D1 D2 [ 0.264778] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.264783] pci 0000:02:06.3: PME# disabled [ 0.264852] pci 0000:00:1e.0: PCI bridge to [bus 02-04] (subtractive decode) [ 0.264860] pci 0000:00:1e.0: bridge window [mem 0xd8100000-0xd83fffff] [ 0.264867] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.264870] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.264872] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.264875] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfedfffff] (subtractive decode) [ 0.264877] pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode) [ 0.264879] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.264986] pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:02 [bus 02-04] [ 0.265025] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT] [ 0.265178] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C096._PRT] [ 0.265206] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT] [ 0.265289] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT] [ 0.265322] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT] [ 0.265358] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT] [ 0.265817] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.266825] pci0000:00: ACPI _OSC control (0x1d) granted [ 0.281071] ACPI: PCI Interrupt Link [C12D] (IRQs *10 11) [ 0.281143] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11) [ 0.281210] ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11) [ 0.281276] ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *5 [ 0.281344] ACPI: PCI Interrupt Link [C140] (IRQs *10 11) [ 0.281410] ACPI: PCI Interrupt Link [C141] (IRQs 10 11) *5 [ 0.281477] ACPI: PCI Interrupt Link [C142] (IRQs 10 *11) [ 0.281508] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20110623/pci_link-184) [ 0.281670] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.281674] vgaarb: loaded [ 0.281676] vgaarb: bridge control possible 0000:01:00.0 [ 0.281787] i2c-core: driver [aat2870] using legacy suspend method [ 0.281789] i2c-core: driver [aat2870] using legacy resume method [ 0.281861] SCSI subsystem initialized [ 0.281930] libata version 3.00 loaded. [ 0.281988] usbcore: registered new interface driver usbfs [ 0.282000] usbcore: registered new interface driver hub [ 0.282028] usbcore: registered new device driver usb [ 0.282119] PCI: Using ACPI for IRQ routing [ 0.284572] PCI: pci_cache_line_size set to 64 bytes [ 0.284706] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.284708] reserve RAM buffer: 00000000bffb0000 - 00000000bfffffff [ 0.284820] NetLabel: Initializing [ 0.284822] NetLabel: domain hash size = 128 [ 0.284823] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.284835] NetLabel: unlabeled traffic allowed by default [ 0.284883] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.284888] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.284893] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.292077] Switching to clocksource hpet [ 0.300108] AppArmor: AppArmor Filesystem Enabled [ 0.300146] pnp: PnP ACPI init [ 0.300167] ACPI: bus type pnp registered [ 0.300286] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 0.300288] pnp 00:00: [mem 0x000e0000-0x000fffff] [ 0.300290] pnp 00:00: [mem 0x00100000-0xbfffffff] [ 0.300369] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.300372] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.300375] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.300379] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.302521] pnp 00:01: [bus 00-ff] [ 0.302523] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.302526] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.302528] pnp 00:01: [io 0x0d00-0xffff window] [ 0.302530] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.302532] pnp 00:01: [mem 0xc0000000-0xfedfffff window] [ 0.302534] pnp 00:01: [mem 0xfee01000-0xffffffff window] [ 0.302536] pnp 00:01: [mem 0x000d0000-0x000dffff window] [ 0.302635] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.303063] pnp 00:02: [io 0x03e8-0x03ef] [ 0.303065] pnp 00:02: [io 0x0100-0x010f] [ 0.303079] pnp 00:02: [irq 6] [ 0.303081] pnp 00:02: [dma 3] [ 0.303148] pnp 00:02: Plug and Play ACPI device, IDs SMCf010 PNP0511 (active) [ 0.303489] pnp 00:03: [io 0x0378-0x037f] [ 0.303491] pnp 00:03: [io 0x0778-0x077a] [ 0.303497] pnp 00:03: [irq 7] [ 0.303499] pnp 00:03: [dma 1] [ 0.303587] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.303650] pnp 00:04: [io 0x0560-0x056f] [ 0.303652] pnp 00:04: [io 0x0570-0x057f] [ 0.303654] pnp 00:04: [mem 0xfed40000-0xfed44fff] [ 0.303681] pnp 00:04: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.303689] pnp 00:05: [io 0x00f0-0x00ff] [ 0.303695] pnp 00:05: [irq 13] [ 0.303725] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.303735] pnp 00:06: [io 0x0000-0x000f] [ 0.303737] pnp 00:06: [io 0x0080-0x008f] [ 0.303739] pnp 00:06: [io 0x00c0-0x00df] [ 0.303741] pnp 00:06: [dma 4] [ 0.303771] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.303779] pnp 00:07: [io 0x0061] [ 0.303804] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.303812] pnp 00:08: [io 0x0070-0x0071] [ 0.303814] pnp 00:08: [io 0x0072-0x0073] [ 0.303819] pnp 00:08: [irq 8] [ 0.303848] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.303902] pnp 00:09: [mem 0xfed00000-0xfed003ff] [ 0.303933] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.303941] pnp 00:0a: [io 0x0060] [ 0.303943] pnp 00:0a: [io 0x0064] [ 0.303949] pnp 00:0a: [irq 1] [ 0.303975] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.303986] pnp 00:0b: [irq 12] [ 0.304040] pnp 00:0b: Plug and Play ACPI device, IDs SYN012f SYN0100 SYN0002 PNP0f13 (active) [ 0.304138] pnp 00:0c: [io 0x0010-0x001f] [ 0.304140] pnp 00:0c: [io 0x0024-0x003f] [ 0.304142] pnp 00:0c: [io 0x004e-0x004f] [ 0.304144] pnp 00:0c: [io 0x0050-0x0053] [ 0.304146] pnp 00:0c: [io 0x0063] [ 0.304147] pnp 00:0c: [io 0x0065] [ 0.304149] pnp 00:0c: [io 0x0067] [ 0.304150] pnp 00:0c: [io 0x0074-0x0077] [ 0.304152] pnp 00:0c: [io 0x0090-0x009f] [ 0.304154] pnp 00:0c: [io 0x00a4-0x00bd] [ 0.304155] pnp 00:0c: [io 0x0500-0x055f] [ 0.304157] pnp 00:0c: [io 0x0800-0x080f] [ 0.304159] pnp 00:0c: [mem 0xffb00000-0xffbfffff] [ 0.304161] pnp 00:0c: [mem 0xfff00000-0xffffffff] [ 0.304231] system 00:0c: [io 0x0500-0x055f] has been reserved [ 0.304234] system 00:0c: [io 0x0800-0x080f] has been reserved [ 0.304237] system 00:0c: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.304240] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved [ 0.304243] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.304728] pnp 00:0d: [irq 23] [ 0.304775] pnp 00:0d: Plug and Play ACPI device, IDs HPQ0004 (active) [ 0.304794] pnp 00:0e: [io 0x04d0-0x04d1] [ 0.304796] pnp 00:0e: [io 0x1000-0x107f] [ 0.304797] pnp 00:0e: [io 0x1100-0x113f] [ 0.304799] pnp 00:0e: [io 0x1200-0x121f] [ 0.304801] pnp 00:0e: [mem 0xf8000000-0xfbffffff] [ 0.304803] pnp 00:0e: [mem 0xfec00000-0xfec000ff] [ 0.304804] pnp 00:0e: [mem 0xfed20000-0xfed3ffff] [ 0.304806] pnp 00:0e: [mem 0xfed45000-0xfed8ffff] [ 0.304808] pnp 00:0e: [mem 0xfed90000-0xfed99fff] [ 0.304878] system 00:0e: [io 0x04d0-0x04d1] has been reserved [ 0.304880] system 00:0e: [io 0x1000-0x107f] has been reserved [ 0.304883] system 00:0e: [io 0x1100-0x113f] has been reserved [ 0.304885] system 00:0e: [io 0x1200-0x121f] has been reserved [ 0.304888] system 00:0e: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.304890] system 00:0e: [mem 0xfec00000-0xfec000ff] could not be reserved [ 0.304893] system 00:0e: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.304895] system 00:0e: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.304898] system 00:0e: [mem 0xfed90000-0xfed99fff] has been reserved [ 0.304901] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.305492] pnp 00:0f: [mem 0x000cfa00-0x000cffff] [ 0.305495] pnp 00:0f: [mem 0xfeda0000-0xfedbffff] [ 0.305497] pnp 00:0f: [mem 0xfee00000-0xfee00fff] [ 0.305568] system 00:0f: [mem 0x000cfa00-0x000cffff] has been reserved [ 0.305571] system 00:0f: [mem 0xfeda0000-0xfedbffff] has been reserved [ 0.305574] system 00:0f: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.305577] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.305602] pnp: PnP ACPI: found 16 devices [ 0.305603] ACPI: ACPI bus type pnp unregistered [ 0.311960] PCI: max bus depth: 2 pci_try_num: 3 [ 0.312043] pci 0000:00:1e.0: BAR 15: assigned [mem 0xc0000000-0xc7ffffff pref] [ 0.312047] pci 0000:00:1e.0: BAR 13: assigned [io 0x6000-0x6fff] [ 0.312051] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc8000000-0xc81fffff 64bit pref] [ 0.312054] pci 0000:01:00.0: BAR 6: assigned [mem 0xd8420000-0xd843ffff pref] [ 0.312057] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.312060] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.312063] pci 0000:00:01.0: bridge window [mem 0xd8400000-0xd84fffff] [ 0.312067] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd3ffffff 64bit pref] [ 0.312071] pci 0000:00:1c.0: PCI bridge to [bus 08-08] [ 0.312086] pci 0000:00:1c.1: PCI bridge to [bus 10-10] [ 0.312092] pci 0000:00:1c.1: bridge window [mem 0xd8000000-0xd80fffff] [ 0.312103] pci 0000:00:1c.4: PCI bridge to [bus 28-28] [ 0.312106] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff] [ 0.312112] pci 0000:00:1c.4: bridge window [mem 0xd4000000-0xd7ffffff] [ 0.312117] pci 0000:00:1c.4: bridge window [mem 0xc8000000-0xc81fffff 64bit pref] [ 0.312127] pci 0000:02:06.1: BAR 16: assigned [mem 0xcc000000-0xcfffffff] [ 0.312130] pci 0000:02:06.1: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref] [ 0.312132] pci 0000:02:06.1: BAR 14: assigned [io 0x6000-0x60ff] [ 0.312134] pci 0000:02:06.1: BAR 13: assigned [io 0x6400-0x64ff] [ 0.312138] pci 0000:02:06.0: BAR 16: assigned [mem 0xdc000000-0xdfffffff] [ 0.312141] pci 0000:02:06.0: BAR 15: assigned [mem 0xc4000000-0xc7ffffff pref] [ 0.312143] pci 0000:02:06.0: BAR 14: assigned [io 0x6800-0x68ff] [ 0.312145] pci 0000:02:06.0: BAR 13: assigned [io 0x6c00-0x6cff] [ 0.312148] pci 0000:02:06.0: CardBus bridge to [bus 03-03] [ 0.312150] pci 0000:02:06.0: bridge window [io 0x6c00-0x6cff] [ 0.312155] pci 0000:02:06.0: bridge window [io 0x6800-0x68ff] [ 0.312161] pci 0000:02:06.0: bridge window [mem 0xc4000000-0xc7ffffff pref] [ 0.312166] pci 0000:02:06.0: bridge window [mem 0xdc000000-0xdfffffff] [ 0.312172] pci 0000:02:06.1: CardBus bridge to [bus 04-07] [ 0.312174] pci 0000:02:06.1: bridge window [io 0x6400-0x64ff] [ 0.312180] pci 0000:02:06.1: bridge window [io 0x6000-0x60ff] [ 0.312185] pci 0000:02:06.1: bridge window [mem 0xc0000000-0xc3ffffff pref] [ 0.312191] pci 0000:02:06.1: bridge window [mem 0xcc000000-0xcfffffff] [ 0.312197] pci 0000:00:1e.0: PCI bridge to [bus 02-04] [ 0.312200] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] [ 0.312206] pci 0000:00:1e.0: bridge window [mem 0xd8100000-0xd83fffff] [ 0.312211] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc7ffffff pref] [ 0.312235] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.312239] pci 0000:00:01.0: setting latency timer to 64 [ 0.312247] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.312252] pci 0000:00:1c.0: setting latency timer to 64 [ 0.312262] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.312267] pci 0000:00:1c.1: setting latency timer to 64 [ 0.312274] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.312279] pci 0000:00:1c.4: setting latency timer to 64 [ 0.312287] pci 0000:00:1e.0: setting latency timer to 64 [ 0.312299] pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.312312] pci 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.312319] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.312321] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.312323] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.312325] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfedfffff] [ 0.312327] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff] [ 0.312330] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff] [ 0.312332] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.312335] pci_bus 0000:01: resource 1 [mem 0xd8400000-0xd84fffff] [ 0.312338] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd3ffffff 64bit pref] [ 0.312341] pci_bus 0000:10: resource 1 [mem 0xd8000000-0xd80fffff] [ 0.312344] pci_bus 0000:28: resource 0 [io 0x2000-0x3fff] [ 0.312347] pci_bus 0000:28: resource 1 [mem 0xd4000000-0xd7ffffff] [ 0.312350] pci_bus 0000:28: resource 2 [mem 0xc8000000-0xc81fffff 64bit pref] [ 0.312353] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff] [ 0.312356] pci_bus 0000:02: resource 1 [mem 0xd8100000-0xd83fffff] [ 0.312359] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc7ffffff pref] [ 0.312362] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.312364] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.312367] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.312370] pci_bus 0000:02: resource 7 [mem 0xc0000000-0xfedfffff] [ 0.312373] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff] [ 0.312376] pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff] [ 0.312379] pci_bus 0000:03: resource 0 [io 0x6c00-0x6cff] [ 0.312381] pci_bus 0000:03: resource 1 [io 0x6800-0x68ff] [ 0.312383] pci_bus 0000:03: resource 2 [mem 0xc4000000-0xc7ffffff pref] [ 0.312385] pci_bus 0000:03: resource 3 [mem 0xdc000000-0xdfffffff] [ 0.312387] pci_bus 0000:04: resource 0 [io 0x6400-0x64ff] [ 0.312389] pci_bus 0000:04: resource 1 [io 0x6000-0x60ff] [ 0.312391] pci_bus 0000:04: resource 2 [mem 0xc0000000-0xc3ffffff pref] [ 0.312393] pci_bus 0000:04: resource 3 [mem 0xcc000000-0xcfffffff] [ 0.312439] NET: Registered protocol family 2 [ 0.312583] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.313849] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.318963] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.319630] TCP: Hash tables configured (established 524288 bind 65536) [ 0.319632] TCP reno registered [ 0.319644] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.319691] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.319830] NET: Registered protocol family 1 [ 0.320078] pci 0000:01:00.0: Boot video device [ 0.320101] PCI: CLS 64 bytes, default 64 [ 0.320104] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.320106] Placing 64MB software IO TLB between ffff8800bbfaa000 - ffff8800bffaa000 [ 0.320108] software IO TLB at phys 0xbbfaa000 - 0xbffaa000 [ 0.320473] audit: initializing netlink socket (disabled) [ 0.320487] type=2000 audit(1330795910.316:1): initialized [ 0.354949] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.384795] VFS: Disk quotas dquot_6.5.2 [ 0.384854] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.385362] fuse init (API version 7.17) [ 0.385450] msgmni has been set to 7733 [ 0.385753] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.385779] io scheduler noop registered [ 0.385781] io scheduler deadline registered [ 0.385813] io scheduler cfq registered (default) [ 0.385929] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.385962] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.386031] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.386087] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.386182] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.386236] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 0.386335] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.386389] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X [ 0.386514] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 0.386516] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.386520] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 0.386540] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.386545] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.386568] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 0.386570] pci 0000:10:00.0: Signaling PME through PCIe PME interrupt [ 0.386575] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 0.386595] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 0.386600] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 0.386619] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.386683] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 2847 ss_vid 103c ss_did 30c1 [ 0.386704] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded [ 0.386711] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.386765] intel_idle: MWAIT substates: 0x3122220 [ 0.386767] intel_idle: does not run on family 6 model 23 [ 0.390403] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.390500] ACPI: AC Adapter [C1E7] (on-line) [ 0.390587] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 0.390593] ACPI: Sleep Button [C26A] [ 0.390635] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.390665] ACPI: Lid Switch [C1ED] [ 0.390711] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.390714] ACPI: Power Button [PWRF] [ 0.390799] ACPI: Fan [C361] (off) [ 0.390847] ACPI: Fan [C362] (off) [ 0.390897] ACPI: Fan [C363] (off) [ 0.390944] ACPI: Fan [C364] (off) [ 0.390990] ACPI: Fan [C365] (off) [ 0.391021] ACPI: Fan [C366] (off) [ 0.391070] ACPI: Fan [C37E] (off) [ 0.391118] ACPI: Fan [C37F] (off) [ 0.391163] ACPI: Fan [C380] (off) [ 0.391211] ACPI: Fan [C381] (off) [ 0.391258] ACPI: Fan [C382] (off) [ 0.400244] Monitor-Mwait will be used to enter C-1 state [ 0.400290] Monitor-Mwait will be used to enter C-2 state [ 0.400298] Marking TSC unstable due to TSC halts in idle [ 0.400306] ACPI: acpi_idle registered with cpuidle [ 0.405888] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.405891] ACPI: Thermal Zone [TZ2] (52 C) [ 0.408555] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.408557] ACPI: Thermal Zone [TZ3] (42 C) [ 0.417676] thermal LNXTHERM:02: registered as thermal_zone2 [ 0.417678] ACPI: Thermal Zone [TZ4] (30 C) [ 0.421428] thermal LNXTHERM:03: registered as thermal_zone3 [ 0.421431] ACPI: Thermal Zone [TZ5] (30 C) [ 0.438447] thermal LNXTHERM:04: registered as thermal_zone4 [ 0.438450] ACPI: Thermal Zone [TZ1] (53 C) [ 0.438511] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.438523] ACPI: Battery Slot [C1E9] (battery present) [ 0.438530] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.438535] ACPI: Battery Slot [C1E8] (battery absent) [ 0.438615] ERST: Table is not found! [ 0.438617] GHES: HEST is not enabled! [ 0.438723] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.438965] ACPI: Battery Slot [C1E8] (battery absent) [ 0.496649] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A [ 0.500883] ACPI: Battery Slot [C1E9] (battery present) [ 0.543451] Freeing initrd memory: 20880k freed [ 0.612251] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.632460] 0000:00:03.3: ttyS4 at I/O 0x5030 (irq = 17) is a 16550A [ 0.648349] Linux agpgart interface v0.103 [ 0.649990] brd: module loaded [ 0.650780] loop: module loaded [ 0.650945] ahci 0000:00:1f.2: version 3.0 [ 0.650967] ahci 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 0.651026] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X [ 0.651067] ahci: SSS flag set, parallel bus scan disabled [ 0.651091] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode [ 0.651094] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc [ 0.651100] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.651496] scsi0 : ahci [ 0.651588] scsi1 : ahci [ 0.651668] scsi2 : ahci [ 0.651742] ata1: SATA max UDMA/133 abar m2048@0xd8549000 port 0xd8549100 irq 44 [ 0.651744] ata2: DUMMY [ 0.651745] ata3: DUMMY [ 0.651802] ata_piix 0000:00:1f.1: version 2.13 [ 0.651811] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.651849] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.652171] scsi3 : ata_piix [ 0.652240] scsi4 : ata_piix [ 0.652505] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5100 irq 14 [ 0.652507] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5108 irq 15 [ 0.652559] pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.652578] ata5: port disabled--ignoring [ 0.652592] pata_acpi 0000:00:03.2: setting latency timer to 64 [ 0.652606] pata_acpi 0000:00:03.2: PCI INT C disabled [ 0.652643] ata_generic 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.652664] ata_generic 0000:00:03.2: setting latency timer to 64 [ 0.653056] scsi5 : ata_generic [ 0.653125] scsi6 : ata_generic [ 0.653165] ata6: PATA max UDMA/100 cmd 0x5000 ctl 0x5008 bmdma 0x5020 irq 18 [ 0.653168] ata7: PATA max UDMA/100 cmd 0x5010 ctl 0x5018 bmdma 0x5028 irq 18 [ 0.653450] Fixed MDIO Bus: probed [ 0.653470] tun: Universal TUN/TAP device driver, 1.6 [ 0.653471] tun: (C) 1999-2004 Max Krasnyansky [ 0.653530] PPP generic driver version 2.4.2 [ 0.653639] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.653656] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.653670] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.653673] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.653722] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.653754] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.657627] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.657631] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd8541000 [ 0.672019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.672159] hub 1-0:1.0: USB hub found [ 0.672163] hub 1-0:1.0: 4 ports detected [ 0.672242] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.672253] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.672256] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.672302] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.672332] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.676214] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.676229] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd8548000 [ 0.692018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.692135] hub 2-0:1.0: USB hub found [ 0.692139] hub 2-0:1.0: 6 ports detected [ 0.692215] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.692227] uhci_hcd: USB Universal Host Controller Interface driver [ 0.692246] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.692253] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.692256] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.692301] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.692339] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00005060 [ 0.692465] hub 3-0:1.0: USB hub found [ 0.692469] hub 3-0:1.0: 2 ports detected [ 0.692541] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.692547] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.692551] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.692601] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.692635] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00005080 [ 0.692761] hub 4-0:1.0: USB hub found [ 0.692765] hub 4-0:1.0: 2 ports detected [ 0.692833] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.692840] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.692843] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.692885] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.692912] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000050a0 [ 0.693035] hub 5-0:1.0: USB hub found [ 0.693038] hub 5-0:1.0: 2 ports detected [ 0.693111] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 0.693117] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.693121] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.693162] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.693197] uhci_hcd 0000:00:1d.1: irq 22, io base 0x000050c0 [ 0.693325] hub 6-0:1.0: USB hub found [ 0.693328] hub 6-0:1.0: 2 ports detected [ 0.693398] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.693405] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.693408] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.693449] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.693476] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050e0 [ 0.693599] hub 7-0:1.0: USB hub found [ 0.693602] hub 7-0:1.0: 2 ports detected [ 0.693713] usbcore: registered new interface driver libusual [ 0.693757] i8042: PNP: PS/2 Controller [PNP0303:C249,PNP0f13:C24A] at 0x60,0x64 irq 1,12 [ 0.695323] i8042: Detected active multiplexing controller, rev 1.1 [ 0.696090] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.696097] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.696124] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.696149] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.696174] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.696300] mousedev: PS/2 mouse device common for all mice [ 0.696496] rtc_cmos 00:08: RTC can wake from S4 [ 0.696623] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.696654] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.696736] device-mapper: uevent: version 1.0.3 [ 0.696815] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.696865] cpuidle: using governor ladder [ 0.696930] cpuidle: using governor menu [ 0.696932] EFI Variables Facility v0.08 2004-May-17 [ 0.697168] TCP cubic registered [ 0.697275] NET: Registered protocol family 10 [ 0.697680] NET: Registered protocol family 17 [ 0.697696] Registering the dns_resolver key type [ 0.697891] PM: Hibernation image not present or could not be loaded. [ 0.697905] registered taskstats version 1 [ 0.716939] Magic number: 4:486:541 [ 0.717093] rtc_cmos 00:08: setting system clock to 2012-03-03 17:31:51 UTC (1330795911) [ 0.721657] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.721659] EDD information not available. [ 0.723302] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.816530] ata4.00: ATAPI: MATSHITADVD-RAM UJ-852S, 1.02, max MWDMA2 [ 0.832432] ata4.00: configured for MWDMA2 [ 0.968068] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.970706] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 0.970710] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 0.970834] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 0.970837] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 0.972888] ata1.00: ATA-8: WDC WD3200BEKT-22PVMT0, 01.01A01, max UDMA/133 [ 0.972891] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.975623] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 0.975627] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 0.975749] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 0.975752] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 0.977786] ata1.00: configured for UDMA/133 [ 0.977941] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-2 01.0 PQ: 0 ANSI: 5 [ 0.978075] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 0.978078] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.978122] sd 0:0:0:0: [sda] Write Protect is off [ 0.978125] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.978162] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.980069] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-852S 1.02 PQ: 0 ANSI: 5 [ 0.982295] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.982297] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.982421] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 0.982536] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 1.063129] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 1.063805] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.149289] Freeing unused kernel memory: 920k freed [ 1.149552] Write protecting the kernel read-only data: 12288k [ 1.154808] Freeing unused kernel memory: 1620k freed [ 1.159134] Freeing unused kernel memory: 1200k freed [ 1.175957] udevd[104]: starting version 175 [ 1.244575] [drm] Initialized drm 1.1.0 20060810 [ 1.247431] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k [ 1.247435] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 1.247471] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.247483] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.247612] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 1.249703] wmi: Mapper loaded [ 1.274824] acpi device:02: registered as cooling_device13 [ 1.275029] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4 [ 1.275076] ACPI: Video Device [C14B] (multi-head: yes rom: no post: no) [ 1.277886] [drm] radeon defaulting to kernel modesetting. [ 1.277889] [drm] radeon kernel modesetting enabled. [ 1.278182] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.278189] radeon 0000:01:00.0: setting latency timer to 64 [ 1.278654] [drm] initializing kernel modesetting (RV515 0x1002:0x7188 0x103C:0x30C1). [ 1.278685] [drm] register mmio base: 0xD8400000 [ 1.278687] [drm] register mmio size: 65536 [ 1.278823] ATOM BIOS: M64S [ 1.278844] [drm] Generation 2 PCI interface, using max accessible memory [ 1.278848] radeon 0000:01:00.0: VRAM: 64M 0x0000000000000000 - 0x0000000003FFFFFF (64M used) [ 1.278851] radeon 0000:01:00.0: GTT: 512M 0x0000000004000000 - 0x0000000023FFFFFF [ 1.278866] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.278867] [drm] Driver supports precise vblank timestamp query. [ 1.278906] radeon 0000:01:00.0: irq 46 for MSI/MSI-X [ 1.278912] radeon 0000:01:00.0: radeon: using MSI. [ 1.278939] [drm] radeon: irq initialized. [ 1.281832] [drm] Detected VRAM RAM=64M, BAR=64M [ 1.281835] [drm] RAM width 64bits DDR [ 1.284059] [TTM] Zone kernel: Available graphics memory: 1992044 kiB. [ 1.284062] [TTM] Initializing pool allocator. [ 1.284090] [drm] radeon: 64M of VRAM memory ready [ 1.284092] [drm] radeon: 512M of GTT memory ready. [ 1.284115] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 1.286237] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 1.287181] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 1.287327] radeon 0000:01:00.0: WB enabled [ 1.287383] [drm] Loading R500 Microcode [ 1.307520] firewire_ohci 0000:02:06.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 1.310661] sdhci: Secure Digital Host Controller Interface driver [ 1.310663] sdhci: Copyright(c) Pierre Ossman [ 1.345035] [drm] radeon: ring at 0x0000000004001000 [ 1.345068] [drm] ring test succeeded in 9 usecs [ 1.345172] [drm] radeon: ib pool ready. [ 1.345259] [drm] ib test succeeded in 0 usecs [ 1.345567] [drm] Radeon Display Connectors [ 1.345569] [drm] Connector 0: [ 1.345570] [drm] VGA [ 1.345572] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 1.345574] [drm] Encoders: [ 1.345575] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 1.345577] [drm] Connector 1: [ 1.345578] [drm] LVDS [ 1.345580] [drm] DDC: 0xc54 0xc54 0xc58 0xc58 0xc5c 0xc5c 0xc60 0xc60 [ 1.345582] [drm] Encoders: [ 1.345583] [drm] LCD1: INTERNAL_LVTM1 [ 1.345584] [drm] Connector 2: [ 1.345585] [drm] S-video [ 1.345586] [drm] Encoders: [ 1.345587] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 1.345589] [drm] Connector 3: [ 1.345590] [drm] DVI-I [ 1.345591] [drm] HPD1 [ 1.345593] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 1.345594] [drm] Encoders: [ 1.345596] [drm] DFP1: INTERNAL_KLDSCP_TMDS1 [ 1.345602] [drm] Possible lm63 thermal controller at 0x4c [ 1.345634] [drm] radeon: power management initialized [ 1.368111] firewire_ohci: Added fw-ohci device 0000:02:06.2, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11 [ 1.368206] sdhci-pci 0000:02:06.3: SDHCI controller found [1180:0822] (rev 20) [ 1.368225] sdhci-pci 0000:02:06.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.369252] sdhci-pci 0000:02:06.3: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.369280] mmc0: no vmmc regulator found [ 1.370302] Registered led device: mmc0:: [ 1.372330] mmc0: SDHCI controller on PCI [0000:02:06.3] using DMA [ 1.388059] usb 3-1: new full-speed USB device number 2 using uhci_hcd [ 1.578346] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:ec:80:47:5c [ 1.578350] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.578378] e1000e 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF [ 1.735388] [drm] fb mappable at 0xD00C0000 [ 1.735391] [drm] vram apper at 0xD0000000 [ 1.735392] [drm] size 5300224 [ 1.735393] [drm] fb depth is 24 [ 1.735394] [drm] pitch is 5888 [ 1.735500] fbcon: radeondrmfb (fb0) is primary device [ 1.735556] Console: switching to colour frame buffer device 180x56 [ 1.735581] fb0: radeondrmfb frame buffer device [ 1.735583] drm: registered panic notifier [ 1.735589] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 [ 1.752110] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 1.872199] firewire_core: created device fw0: GUID 00023f99296d3f10, S400 [ 2.320194] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 2.624064] usb 7-2: new full-speed USB device number 4 using uhci_hcd [ 2.688097] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 3.120061] usb 7-2: new full-speed USB device number 5 using uhci_hcd [ 3.240060] usb 7-2: device descriptor read/64, error -71 [ 3.464074] usb 7-2: device descriptor read/64, error -71 [ 3.680073] usb 7-2: new full-speed USB device number 6 using uhci_hcd [ 3.800060] usb 7-2: device descriptor read/64, error -71 [ 3.968090] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 4.552100] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 5.792088] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 6.344061] usb 7-2: new full-speed USB device number 9 using uhci_hcd [ 6.408088] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 6.832105] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 7.336074] usb 7-2: new full-speed USB device number 11 using uhci_hcd [ 7.434082] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 7.460091] usb 7-2: device descriptor read/64, error -71 [ 7.688067] usb 7-2: device descriptor read/64, error -71 [ 7.904063] usb 7-2: new full-speed USB device number 12 using uhci_hcd [ 8.024058] usb 7-2: device descriptor read/64, error -71 [ 8.192113] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 8.768149] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 10.016064] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 10.825756] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.053053] udevd[418]: starting version 175 [ 11.260100] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 11.500121] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 11.795824] lp: driver loaded but no devices found [ 11.804076] usb 7-2: new full-speed USB device number 17 using uhci_hcd [ 11.924081] usb 7-2: device descriptor read/64, error -71 [ 12.092096] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 12.658393] parport_pc 00:03: reported by Plug and Play ACPI [ 12.658477] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 12.731676] ppdev: user-space parallel port driver [ 12.748198] lp0: using parport0 (interrupt-driven). [ 12.748317] tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16) [ 12.791935] cfg80211: Calling CRDA to update world regulatory domain [ 12.792309] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 12.792608] mei 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.792615] mei 0000:00:03.0: setting latency timer to 64 [ 12.792695] mei 0000:00:03.0: irq 47 for MSI/MSI-X [ 13.235284] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30c1] [ 13.360698] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0c38, PCI irq 18 [ 13.360703] yenta_cardbus 0000:02:06.0: Socket status: 30000006 [ 13.360710] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io 0x6000-0x6fff] [ 13.360713] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xd8100000-0xd83fffff] [ 13.360715] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd8100000-0xd83fffff: excluding 0xd8100000-0xd812ffff [ 13.360728] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xc0000000-0xc7ffffff pref] [ 13.360731] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0000000-0xc7ffffff: excluding 0xc0000000-0xc7ffffff [ 13.362094] yenta_cardbus 0000:02:06.1: CardBus bridge found [103c:30c1] [ 13.392026] usb 7-2: new full-speed USB device number 18 using uhci_hcd [ 13.400123] hp_accel: laptop model unknown, using default axes configuration [ 13.400723] lis3lv02d: 12 bits sensor found [ 13.416112] tpm_tis 00:04: Adjusting TPM timeout parameters. [ 13.480585] irda_init() [ 13.480597] NET: Registered protocol family 23 [ 13.488700] yenta_cardbus 0000:02:06.1: ISA IRQ mask 0x0c38, PCI irq 19 [ 13.488704] yenta_cardbus 0000:02:06.1: Socket status: 30000810 [ 13.488708] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07 [ 13.488718] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [io 0x6000-0x6fff] [ 13.488721] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [mem 0xd8100000-0xd83fffff] [ 13.488723] pcmcia_socket pcmcia_socket1: cs: memory probe 0xd8100000-0xd83fffff: excluding 0xd8100000-0xd812ffff [ 13.488736] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [mem 0xc0000000-0xc7ffffff pref] [ 13.488738] pcmcia_socket pcmcia_socket1: cs: memory probe 0xc0000000-0xc7ffffff: excluding 0xc0000000-0xc7ffffff [ 13.499599] Bluetooth: Core ver 2.16 [ 13.499647] NET: Registered protocol family 31 [ 13.499650] Bluetooth: HCI device and connection manager initialized [ 13.499652] Bluetooth: HCI socket layer initialized [ 13.499654] Bluetooth: L2CAP socket layer initialized [ 13.499661] Bluetooth: SCO socket layer initialized [ 13.512052] usb 7-2: device descriptor read/64, error -71 [ 13.520569] input: HP WMI hotkeys as /devices/virtual/input/input5 [ 13.580084] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6 [ 13.580409] Registered led device: hp::hddprotect [ 13.580437] hp_accel: driver loaded [ 13.659666] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0 [ 13.659673] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0 [ 13.680063] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 13.700915] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 13.869536] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff [ 13.869564] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff [ 13.869587] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff [ 13.988165] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 13.988385] usbcore: registered new interface driver btusb [ 14.123605] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree: [ 14.123608] iwl4965: Copyright(c) 2003-2011 Intel Corporation [ 14.123687] iwl4965 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 14.123696] iwl4965 0000:10:00.0: setting latency timer to 64 [ 14.123721] iwl4965 0000:10:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 [ 14.150374] cfg80211: World regulatory domain updated: [ 14.150377] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.150380] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.150382] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.150384] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.150387] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.150389] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.162075] iwl4965 0000:10:00.0: device EEPROM VER=0x36, CALIB=0x5 [ 14.162107] iwl4965 0000:10:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 14.162193] iwl4965 0000:10:00.0: irq 48 for MSI/MSI-X [ 14.228067] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 14.247733] type=1400 audit(1330792325.025:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=701 comm="apparmor_parser" [ 14.247742] type=1400 audit(1330792325.025:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=731 comm="apparmor_parser" [ 14.248137] type=1400 audit(1330792325.029:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=701 comm="apparmor_parser" [ 14.248144] type=1400 audit(1330792325.029:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=731 comm="apparmor_parser" [ 14.248355] type=1400 audit(1330792325.029:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=701 comm="apparmor_parser" [ 14.248363] type=1400 audit(1330792325.029:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=731 comm="apparmor_parser" [ 14.289325] found SMC SuperIO Chip (devid=0x7a rev=03 base=0x004e): LPC47N227 [ 14.289349] smsc_superio_flat(): fir: 0x100, sir: 0x3e8, dma: 03, irq: 6, mode: 0x0e [ 14.289354] smsc_ircc_present: can't get sir_base of 0x3e8 [ 14.376383] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0 [ 14.376392] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0 [ 14.376401] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 14.376473] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X [ 14.376506] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 14.380023] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1 [ 14.380030] pcmcia_socket pcmcia_socket1: cs: memory probe 0xd8130000-0xd83fffff: excluding 0xd83f0000-0xd841bfff [ 14.385896] pcmcia 1.0: pcmcia: registering new device pcmcia1.0 (IRQ: 19) [ 14.386053] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff [ 14.386083] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff [ 14.386106] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff [ 14.720057] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 14.742446] scsi7 : pata_pcmcia [ 14.742506] ata8: PATA max PIO0 cmd 0x6100 ctl 0x610e irq 19 [ 14.759799] iwl4965 0000:10:00.0: loaded firmware version 228.61.2.24 [ 14.760012] Registered led device: phy0-led [ 14.760044] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 14.932883] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs' [ 15.216049] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 16.512043] usb 7-2: new full-speed USB device number 22 using uhci_hcd [ 16.636032] usb 7-2: device descriptor read/64, error -71 [ 16.860025] usb 7-2: device descriptor read/64, error -71 [ 17.076041] usb 7-2: new full-speed USB device number 23 using uhci_hcd [ 17.200046] usb 7-2: device descriptor read/64, error -71 [ 17.368064] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 17.401504] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 17.552107] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 17.696203] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 18.032082] usb 7-2: new full-speed USB device number 25 using uhci_hcd [ 18.152053] usb 7-2: device descriptor read/64, error -71 [ 18.384052] usb 7-2: device descriptor read/64, error -71 [ 18.600035] usb 7-2: new full-speed USB device number 26 using uhci_hcd [ 18.668067] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 18.695691] type=1400 audit(1330792329.473:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1035 comm="apparmor_parser" [ 18.696104] type=1400 audit(1330792329.477:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1035 comm="apparmor_parser" [ 18.696330] type=1400 audit(1330792329.477:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1035 comm="apparmor_parser" [ 18.826027] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input8 [ 19.738693] type=1400 audit(1330792330.517:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1034 comm="apparmor_parser" [ 19.780324] type=1400 audit(1330792330.561:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=1041 comm="apparmor_parser" [ 19.975606] type=1400 audit(1330792330.753:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1036 comm="apparmor_parser" [ 19.981022] type=1400 audit(1330792330.761:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1036 comm="apparmor_parser" [ 19.982190] type=1400 audit(1330792330.761:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1036 comm="apparmor_parser" [ 19.983437] type=1400 audit(1330792330.761:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1036 comm="apparmor_parser" [ 19.986523] type=1400 audit(1330792330.765:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=1036 comm="apparmor_parser" [ 19.987556] type=1400 audit(1330792330.765:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=1036 comm="apparmor_parser" [ 19.988528] type=1400 audit(1330792330.769:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1036 comm="apparmor_parser" [ 19.990671] type=1400 audit(1330792330.769:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=1036 comm="apparmor_parser" [ 22.040041] Bluetooth: RFCOMM TTY layer initialized [ 22.040047] Bluetooth: RFCOMM socket layer initialized [ 22.040049] Bluetooth: RFCOMM ver 1.11 [ 22.084210] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 22.084213] Bluetooth: BNEP filters: protocol multicast [ 24.346087] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 24.400152] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 24.401391] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.402028] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.646174] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 24.646432] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 24.900737] init: failsafe main process (991) killed by TERM signal [ 24.974353] audit_printk_skb: 24 callbacks suppressed [ 24.974356] type=1400 audit(1330792335.753:29): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=1211 comm="apparmor_parser"