[ 24.670] X.Org X Server 1.13.2 Release Date: 2013-01-24 [ 24.670] X Protocol Version 11, Revision 0 [ 24.670] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu [ 24.670] Current Operating System: Linux j0053-HP-ProBook-4420s 3.8.0-6-generic #11-Ubuntu SMP Mon Feb 11 16:03:48 UTC 2013 i686 [ 24.670] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-6-generic root=UUID=8a691df1-94b5-42e2-9bc9-58195c3ca7ac ro quiet splash vt.handoff=7 [ 24.670] Build Date: 09 February 2013 07:21:55AM [ 24.670] xorg-server 2:1.13.2-0ubuntu2 (For technical support please see http://www.ubuntu.com/support) [ 24.670] Current version of pixman: 0.28.2 [ 24.670] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 24.670] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 24.670] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 13 11:42:55 2013 [ 24.700] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 24.701] (==) No Layout section. Using the first Screen section. [ 24.701] (==) No screen section available. Using defaults. [ 24.701] (**) |-->Screen "Default Screen Section" (0) [ 24.701] (**) | |-->Monitor "" [ 24.701] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 24.701] (==) Automatically adding devices [ 24.701] (==) Automatically enabling devices [ 24.701] (==) Automatically adding GPU devices [ 24.701] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 24.701] Entry deleted from font path. [ 24.701] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 24.701] Entry deleted from font path. [ 24.701] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 24.701] Entry deleted from font path. [ 24.701] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 24.701] Entry deleted from font path. [ 24.702] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 24.702] Entry deleted from font path. [ 24.702] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins [ 24.702] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 24.702] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 24.702] (II) Loader magic: 0xb778c6a0 [ 24.702] (II) Module ABI versions: [ 24.702] X.Org ANSI C Emulation: 0.4 [ 24.702] X.Org Video Driver: 13.1 [ 24.702] X.Org XInput driver : 18.0 [ 24.702] X.Org Server Extension : 7.0 [ 24.702] (II) config/udev: Adding drm device (/dev/dri/card0) [ 24.705] (--) PCI:*(0:0:2:0) 8086:0046:103c:1423 rev 18, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00005030/8 [ 24.705] (II) Open ACPI successful (/var/run/acpid.socket) [ 24.705] Initializing built-in extension Generic Event Extension [ 24.705] Initializing built-in extension SHAPE [ 24.705] Initializing built-in extension MIT-SHM [ 24.705] Initializing built-in extension XInputExtension [ 24.705] Initializing built-in extension XTEST [ 24.705] Initializing built-in extension BIG-REQUESTS [ 24.705] Initializing built-in extension SYNC [ 24.705] Initializing built-in extension XKEYBOARD [ 24.705] Initializing built-in extension XC-MISC [ 24.705] Initializing built-in extension SECURITY [ 24.705] Initializing built-in extension XINERAMA [ 24.705] Initializing built-in extension XFIXES [ 24.705] Initializing built-in extension RENDER [ 24.705] Initializing built-in extension RANDR [ 24.705] Initializing built-in extension COMPOSITE [ 24.705] Initializing built-in extension DAMAGE [ 24.705] Initializing built-in extension MIT-SCREEN-SAVER [ 24.705] Initializing built-in extension DOUBLE-BUFFER [ 24.705] Initializing built-in extension RECORD [ 24.705] Initializing built-in extension DPMS [ 24.705] Initializing built-in extension X-Resource [ 24.705] Initializing built-in extension XVideo [ 24.705] Initializing built-in extension XVideo-MotionCompensation [ 24.705] Initializing built-in extension SELinux [ 24.705] Initializing built-in extension XFree86-VidModeExtension [ 24.705] Initializing built-in extension XFree86-DGA [ 24.705] Initializing built-in extension XFree86-DRI [ 24.705] Initializing built-in extension DRI2 [ 24.705] (II) LoadModule: "glx" [ 24.799] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 24.800] (II) Module glx: vendor="X.Org Foundation" [ 24.800] compiled for 1.13.2, module version = 1.0.0 [ 24.800] ABI class: X.Org Server Extension, version 7.0 [ 24.800] (==) AIGLX enabled [ 24.800] Loading extension GLX [ 24.800] (==) Matched intel as autoconfigured driver 0 [ 24.800] (==) Matched intel as autoconfigured driver 1 [ 24.800] (==) Matched vesa as autoconfigured driver 2 [ 24.800] (==) Matched modesetting as autoconfigured driver 3 [ 24.800] (==) Matched fbdev as autoconfigured driver 4 [ 24.800] (==) Assigned the driver to the xf86ConfigLayout [ 24.800] (II) LoadModule: "intel" [ 24.800] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 24.800] (II) Module intel: vendor="X.Org Foundation" [ 24.800] compiled for 1.13.2, module version = 2.21.2 [ 24.800] Module class: X.Org Video Driver [ 24.800] ABI class: X.Org Video Driver, version 13.1 [ 24.800] (II) LoadModule: "vesa" [ 24.801] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 24.801] (II) Module vesa: vendor="X.Org Foundation" [ 24.801] compiled for 1.12.99.902, module version = 2.3.2 [ 24.801] Module class: X.Org Video Driver [ 24.801] ABI class: X.Org Video Driver, version 13.0 [ 24.801] (II) LoadModule: "modesetting" [ 24.801] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 24.801] (II) Module modesetting: vendor="X.Org Foundation" [ 24.801] compiled for 1.13.1.901, module version = 0.6.0 [ 24.801] Module class: X.Org Video Driver [ 24.801] ABI class: X.Org Video Driver, version 13.1 [ 24.801] (II) LoadModule: "fbdev" [ 24.801] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 24.801] (II) Module fbdev: vendor="X.Org Foundation" [ 24.801] compiled for 1.12.99.902, module version = 0.4.3 [ 24.801] Module class: X.Org Video Driver [ 24.801] ABI class: X.Org Video Driver, version 13.0 [ 24.801] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 24.802] (II) VESA: driver for VESA chipsets: vesa [ 24.802] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 24.802] (II) FBDEV: driver for framebuffer: fbdev [ 24.802] (++) using VT number 7 [ 24.802] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.21.2-0ubuntu1 (Timo Aaltonen ) [ 24.802] (WW) Falling back to old probe method for vesa [ 24.802] (WW) Falling back to old probe method for modesetting [ 24.802] (WW) Falling back to old probe method for fbdev [ 24.802] (II) Loading sub module "fbdevhw" [ 24.802] (II) LoadModule: "fbdevhw" [ 24.803] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 24.803] (II) Module fbdevhw: vendor="X.Org Foundation" [ 24.803] compiled for 1.13.2, module version = 0.0.2 [ 24.803] ABI class: X.Org Video Driver, version 13.1 [ 24.803] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 24.803] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 24.803] (==) intel(0): RGB weight 888 [ 24.803] (==) intel(0): Default visual is TrueColor [ 24.803] (--) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale [ 24.804] (**) intel(0): Framebuffer tiled [ 24.804] (**) intel(0): Pixmaps tiled [ 24.804] (**) intel(0): "Tear free" disabled [ 24.804] (**) intel(0): Forcing per-crtc-pixmaps? no [ 24.804] (II) intel(0): Output LVDS1 has no monitor section [ 24.804] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware') [ 24.820] (II) intel(0): Output VGA1 has no monitor section [ 24.836] (II) intel(0): Output HDMI1 has no monitor section [ 24.884] (II) intel(0): Output DP1 has no monitor section [ 24.884] (II) intel(0): EDID for output LVDS1 [ 24.884] (II) intel(0): Manufacturer: LGD Model: 251 Serial#: 0 [ 24.884] (II) intel(0): Year: 2009 Week: 0 [ 24.884] (II) intel(0): EDID Version: 1.3 [ 24.884] (II) intel(0): Digital Display Input [ 24.884] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17 [ 24.884] (II) intel(0): Gamma: 2.20 [ 24.884] (II) intel(0): No DPMS capabilities specified [ 24.884] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 24.884] (II) intel(0): First detailed timing is preferred mode [ 24.884] (II) intel(0): redX: 0.591 redY: 0.350 greenX: 0.338 greenY: 0.550 [ 24.884] (II) intel(0): blueX: 0.156 blueY: 0.118 whiteX: 0.313 whiteY: 0.329 [ 24.884] (II) intel(0): Manufacturer's mask: 0 [ 24.884] (II) intel(0): Supported detailed timing: [ 24.884] (II) intel(0): clock: 69.3 MHz Image Size: 310 x 174 mm [ 24.884] (II) intel(0): h_active: 1366 h_sync: 1398 h_sync_end 1430 h_blank_end 1486 h_border: 0 [ 24.884] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 782 v_border: 0 [ 24.884] (II) intel(0): LG Display [ 24.884] (II) intel(0): LP140WH1-TLC3 [ 24.884] (II) intel(0): EDID (in hex): [ 24.884] (II) intel(0): 00ffffffffffff0030e4510200000000 [ 24.884] (II) intel(0): 00130103801f11780a6b159759568c28 [ 24.884] (II) intel(0): 1e505400000001010101010101010101 [ 24.884] (II) intel(0): 010101010101121b567850000e302020 [ 24.884] (II) intel(0): 350036ae100000190000000000000000 [ 24.884] (II) intel(0): 00000000000000000000000000fe004c [ 24.884] (II) intel(0): 4720446973706c61790a2020000000fe [ 24.884] (II) intel(0): 004c503134305748312d544c433300ec [ 24.884] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 24.884] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 24.884] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 24.884] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 24.884] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 24.884] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 24.884] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 24.884] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 24.884] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 24.884] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 24.884] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 24.884] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 24.884] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 24.884] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 24.884] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) [ 24.884] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) [ 24.884] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 24.884] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 24.884] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 24.884] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 24.884] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 24.884] (II) intel(0): Printing probed modes for output LVDS1 [ 24.884] (II) intel(0): Modeline "1366x768"x59.6 69.30 1366 1398 1430 1486 768 771 776 782 -hsync -vsync (46.6 kHz eP) [ 24.884] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d) [ 24.884] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d) [ 24.884] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 24.884] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 24.884] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 24.884] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 24.900] (II) intel(0): EDID for output VGA1 [ 24.916] (II) intel(0): EDID for output HDMI1 [ 24.964] (II) intel(0): EDID for output DP1 [ 24.964] (II) intel(0): Output LVDS1 connected [ 24.964] (II) intel(0): Output VGA1 disconnected [ 24.964] (II) intel(0): Output HDMI1 disconnected [ 24.964] (II) intel(0): Output DP1 disconnected [ 24.964] (II) intel(0): Using exact sizes for initial modes [ 24.964] (II) intel(0): Output LVDS1 using initial mode 1366x768 [ 24.964] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 24.964] (==) intel(0): DPI set to (96, 96) [ 24.964] (II) Loading sub module "dri2" [ 24.964] (II) LoadModule: "dri2" [ 24.964] (II) Module "dri2" already built-in [ 24.964] (II) UnloadModule: "vesa" [ 24.964] (II) Unloading vesa [ 24.964] (II) UnloadModule: "modesetting" [ 24.964] (II) Unloading modesetting [ 24.964] (II) UnloadModule: "fbdev" [ 24.964] (II) Unloading fbdev [ 24.964] (II) UnloadSubModule: "fbdevhw" [ 24.964] (II) Unloading fbdevhw [ 24.964] (==) Depth 24 pixmap format is 32 bpp [ 24.964] (II) intel(0): SNA initialized with Ironlake backend [ 24.964] (==) intel(0): Backing store disabled [ 24.964] (==) intel(0): Silken mouse enabled [ 24.964] (II) intel(0): HW Cursor enabled [ 24.964] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 24.965] (==) intel(0): DPMS enabled [ 24.965] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 24.965] (II) intel(0): [DRI2] Setup complete [ 24.965] (II) intel(0): [DRI2] DRI driver: i965 [ 24.965] (II) intel(0): direct rendering: DRI2 Enabled [ 24.965] (==) intel(0): hotplug detection: "enabled" [ 24.966] (--) RandR disabled [ 24.974] (II) SELinux: Disabled on system [ 24.979] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 24.979] (II) AIGLX: enabled GLX_INTEL_swap_event [ 24.979] (II) AIGLX: enabled GLX_ARB_create_context [ 24.979] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 24.979] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 24.979] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 24.979] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 24.979] (II) AIGLX: Loaded and initialized i965 [ 24.979] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 24.980] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0) [ 25.004] (II) intel(0): Setting screen physical size to 361 x 203 [ 25.014] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 25.017] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 25.017] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 25.017] (II) LoadModule: "evdev" [ 25.017] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 25.017] (II) Module evdev: vendor="X.Org Foundation" [ 25.017] compiled for 1.13.0, module version = 2.7.3 [ 25.017] Module class: X.Org XInput Driver [ 25.017] ABI class: X.Org XInput driver, version 18.0 [ 25.017] (II) Using input driver 'evdev' for 'Power Button' [ 25.017] (**) Power Button: always reports core events [ 25.017] (**) evdev: Power Button: Device: "/dev/input/event2" [ 25.017] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 25.017] (--) evdev: Power Button: Found keys [ 25.017] (II) evdev: Power Button: Configuring as keyboard [ 25.017] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 25.017] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 25.017] (**) Option "xkb_rules" "evdev" [ 25.017] (**) Option "xkb_model" "pc105" [ 25.018] (**) Option "xkb_layout" "us" [ 25.018] (II) config/udev: Adding input device Video Bus (/dev/input/event8) [ 25.018] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 25.018] (II) Using input driver 'evdev' for 'Video Bus' [ 25.018] (**) Video Bus: always reports core events [ 25.018] (**) evdev: Video Bus: Device: "/dev/input/event8" [ 25.018] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 25.018] (--) evdev: Video Bus: Found keys [ 25.018] (II) evdev: Video Bus: Configuring as keyboard [ 25.018] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8/event8" [ 25.018] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 25.018] (**) Option "xkb_rules" "evdev" [ 25.018] (**) Option "xkb_model" "pc105" [ 25.018] (**) Option "xkb_layout" "us" [ 25.019] (II) config/udev: Adding input device Lid Switch (/dev/input/event1) [ 25.019] (II) No input driver specified, ignoring this device. [ 25.019] (II) This device may have been added with another device file. [ 25.019] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 25.019] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 25.019] (II) Using input driver 'evdev' for 'Sleep Button' [ 25.019] (**) Sleep Button: always reports core events [ 25.019] (**) evdev: Sleep Button: Device: "/dev/input/event0" [ 25.019] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 25.019] (--) evdev: Sleep Button: Found keys [ 25.019] (II) evdev: Sleep Button: Configuring as keyboard [ 25.019] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0" [ 25.019] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 25.019] (**) Option "xkb_rules" "evdev" [ 25.019] (**) Option "xkb_model" "pc105" [ 25.019] (**) Option "xkb_layout" "us" [ 25.019] (II) config/udev: Adding drm device (/dev/dri/card0) [ 25.020] (II) config/udev: Adding input device Villem (/dev/input/event5) [ 25.020] (**) Villem: Applying InputClass "evdev keyboard catchall" [ 25.020] (II) Using input driver 'evdev' for 'Villem' [ 25.020] (**) Villem: always reports core events [ 25.020] (**) evdev: Villem: Device: "/dev/input/event5" [ 25.020] (--) evdev: Villem: Vendor 0x461 Product 0x4db6 [ 25.020] (--) evdev: Villem: Found keys [ 25.020] (II) evdev: Villem: Configuring as keyboard [ 25.020] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input5/event5" [ 25.020] (II) XINPUT: Adding extended input device "Villem" (type: KEYBOARD, id 9) [ 25.020] (**) Option "xkb_rules" "evdev" [ 25.020] (**) Option "xkb_model" "pc105" [ 25.020] (**) Option "xkb_layout" "us" [ 25.020] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event10) [ 25.020] (II) No input driver specified, ignoring this device. [ 25.020] (II) This device may have been added with another device file. [ 25.021] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event11) [ 25.021] (II) No input driver specified, ignoring this device. [ 25.021] (II) This device may have been added with another device file. [ 25.021] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event9) [ 25.021] (II) No input driver specified, ignoring this device. [ 25.021] (II) This device may have been added with another device file. [ 25.021] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 25.021] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 25.021] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 25.021] (**) AT Translated Set 2 keyboard: always reports core events [ 25.021] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3" [ 25.021] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 25.021] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 25.021] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 25.021] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 25.021] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10) [ 25.021] (**) Option "xkb_rules" "evdev" [ 25.021] (**) Option "xkb_model" "pc105" [ 25.021] (**) Option "xkb_layout" "us" [ 25.022] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7) [ 25.022] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 25.022] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 25.022] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 25.022] (II) LoadModule: "synaptics" [ 25.022] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 25.022] (II) Module synaptics: vendor="X.Org Foundation" [ 25.022] compiled for 1.13.1.901, module version = 1.6.2 [ 25.022] Module class: X.Org XInput Driver [ 25.022] ABI class: X.Org XInput driver, version 18.0 [ 25.022] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 25.022] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 25.022] (**) Option "Device" "/dev/input/event7" [ 25.024] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device [ 25.024] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property [ 25.024] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5542 [ 25.024] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4470 [ 25.024] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 25.024] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 25.024] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple [ 25.024] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 25.024] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0" [ 25.024] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 25.024] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 25.024] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input7/event7" [ 25.024] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11) [ 25.024] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 25.024] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75 [ 25.024] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.039 [ 25.025] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 25.025] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 25.025] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 25.025] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 25.025] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 25.025] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 25.025] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 25.026] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event4) [ 25.026] (II) No input driver specified, ignoring this device. [ 25.026] (II) This device may have been added with another device file. [ 25.026] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0) [ 25.026] (II) No input driver specified, ignoring this device. [ 25.026] (II) This device may have been added with another device file. [ 25.029] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6) [ 25.029] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 25.029] (II) Using input driver 'evdev' for 'HP WMI hotkeys' [ 25.029] (**) HP WMI hotkeys: always reports core events [ 25.029] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event6" [ 25.029] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0 [ 25.029] (--) evdev: HP WMI hotkeys: Found keys [ 25.029] (II) evdev: HP WMI hotkeys: Configuring as keyboard [ 25.029] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6" [ 25.029] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 12) [ 25.029] (**) Option "xkb_rules" "evdev" [ 25.029] (**) Option "xkb_model" "pc105" [ 25.029] (**) Option "xkb_layout" "us" [ 26.083] (II) intel(0): EDID vendor "LGD", prod id 593 [ 26.083] (II) intel(0): Printing DDC gathered Modelines: [ 26.083] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 771 776 782 -hsync -vsync (46.6 kHz eP) [ 27.297] (II) intel(0): EDID vendor "LGD", prod id 593 [ 27.297] (II) intel(0): Printing DDC gathered Modelines: [ 27.297] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 771 776 782 -hsync -vsync (46.6 kHz eP) [ 82.429] (II) intel(0): EDID vendor "LGD", prod id 593 [ 82.429] (II) intel(0): Printing DDC gathered Modelines: [ 82.429] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 771 776 782 -hsync -vsync (46.6 kHz eP) [ 83.252] (II) intel(0): EDID vendor "LGD", prod id 593 [ 83.252] (II) intel(0): Printing DDC gathered Modelines: [ 83.252] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 771 776 782 -hsync -vsync (46.6 kHz eP) [ 84.539] (II) intel(0): EDID vendor "LGD", prod id 593 [ 84.539] (II) intel(0): Printing DDC gathered Modelines: [ 84.539] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 771 776 782 -hsync -vsync (46.6 kHz eP) [ 85.189] (II) intel(0): EDID vendor "LGD", prod id 593 [ 85.189] (II) intel(0): Printing DDC gathered Modelines: [ 85.189] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 771 776 782 -hsync -vsync (46.6 kHz eP) [ 88.857] (II) intel(0): EDID vendor "LGD", prod id 593 [ 88.857] (II) intel(0): Printing DDC gathered Modelines: [ 88.857] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 771 776 782 -hsync -vsync (46.6 kHz eP) [ 94.736] (II) XKB: reuse xkmfile /var/lib/xkb/server-832D042E617B49D61C7C7B5C8DCC4B36CD5741AF.xkm [ 104.354] (II) intel(0): EDID vendor "LGD", prod id 593 [ 104.354] (II) intel(0): Printing DDC gathered Modelines: [ 104.354] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 771 776 782 -hsync -vsync (46.6 kHz eP) [ 1330.748] (II) Open ACPI successful (/var/run/acpid.socket)