dcam_juju_capture_thread (375) :Dequeue failed!

Bug #1131217 reported by WIllington Velasco
6
This bug affects 1 person
Affects Status Importance Assigned to Milestone
unicap
New
Undecided
Unassigned

Bug Description

Hello,

I´m installing a DFx 41BF02 using the juju stack, i compile the latest code succesfully
(btw, since latest distros aren´t shipphing *.la files compilling libunicapgtk shows some errors)
i test it on a Toshiba Qosmio laptop and works Ok,

but i tried on another computer (desktop computer) and fails, i made sure have the same kernell 3.2.0-38-generic
distro, libraries, etc. i´ve tested the camera sucessfully with coriander (libdc1394) and works ok, so isn't a harware problem.

i put --enable-debug-dcam on configure script, and test with sdl_display.c , the windows popup with a green color ...

here is the output:

-------------------
Select video format: 0
dcam.c cpi_enumerate_formats (507) :dcam enumerate formats, index: 0 id: YUV(4:2:2) 1280x960
dcam.c cpi_enumerate_formats (508) :format: 1280x960x16
dcam.c cpi_set_format (549) :current_format_index: 0, in identifier: YUV(4:2:2) 1280x960 out identifier: YUV(4:2:2) 1280x960
dcam_property.c _dcam_check_frame_rate_available (1787) :check frame rate avail: quad= 60000000, rate: 5 := 0
dcam_property.c _dcam_check_frame_rate_available (1787) :check frame rate avail: quad= 60000000, rate: 4 := 0
dcam_property.c _dcam_check_frame_rate_available (1787) :check frame rate avail: quad= 60000000, rate: 3 := 0
dcam_property.c _dcam_check_frame_rate_available (1787) :check frame rate avail: quad= 60000000, rate: 2 := 1
dcam_v_modes.c _dcam_set_mode_and_format (210) :format: 2, mode: 0
dcam.c dcam_capture_start (815) :BW_allocate: success
dcam.c dcam_capture_start (820) :BW allocated
dcam.c dcam_capture_start (868) :bytes per pkt: 2560 idx: 98, channel: 0, frame rate: 2
dcam_juju_capture.c dcam_juju_capture_thread (375) :Dequeue failed!
dcam_juju_capture.c dcam_juju_shutdown (233) :Failed to stop iso
1394util.c _1394util_free_bandwidth (509) :Available bandwidth: 0x933 ( 2355 )
dcam.c dcam_capture_start (815) :BW_allocate: success
dcam.c dcam_capture_start (820) :BW allocated
dcam.c dcam_capture_start (868) :bytes per pkt: 2560 idx: 98, channel: 0, frame rate: 2
Failed to wait for buffer on device: Imaging Source DFx 41BF02 1841210488
------------

the firewire board is:
04:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller (rev 01)

Many thanks for your help !

Revision history for this message
WIllington Velasco (wito) wrote :

Update on this

the fails occurs when you have more than one Firewire card, i´was setting up for 2 cameras with 2 different adaptors
(if i put 2 cameras on the same card, i have bandwith problems, and some glitches.. nevermind)
the second card doesn´t work, i mean the second enumerate card on PCI bus or ( /dev/fw1)
so could be a mismatch enumeration ? or its a libraw1394 problem?

the test with libdc1394 are ok ( mean that bot Firewire cards are ok)

thanks again

To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.