[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-20-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #57-Ubuntu SMP Mon Feb 8 09:05:19 UTC 2010 (Ubuntu 2.6.31-20.57-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d6008 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 0E0000000 mask FFC000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000ce000 - 00000000000d6008 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] modified: 000000003fff0000 - 000000003fff8000 (ACPI data) [ 0.000000] modified: 000000003fff8000 - 0000000040000000 (ACPI NVS) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 37842000 - 37fefc39 [ 0.000000] Allocated new RAMDISK: 008b2000 - 0105fc39 [ 0.000000] Move RAMDISK from 0000000037842000 - 0000000037fefc38 to 008b2000 - 0105fc38 [ 0.000000] ACPI: RSDP 000fa220 00014 (v00 AMI ) [ 0.000000] ACPI: RSDT 3fff0000 0002C (v01 AMIINT INTEL845 00000010 MSFT 00000097) [ 0.000000] ACPI: FACP 3fff0030 00081 (v01 AMIINT INTEL845 00000011 MSFT 00000097) [ 0.000000] ACPI: DSDT 3fff0120 03767 (v01 INTEL BROKDLEG 00001000 MSFT 0100000D) [ 0.000000] ACPI: FACS 3fff8000 00040 [ 0.000000] ACPI: APIC 3fff00c0 0005C (v01 AMIINT INTEL845 00000009 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008ad060] TEXT DATA BSS ==> [0000100000 - 00008ad060] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008ae000 - 00008b1120] BRK ==> [00008ae000 - 00008b1120] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008b2000 - 000105fc39] NEW RAMDISK ==> [00008b2000 - 000105fc39] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00fb900] fb900 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262015 [ 0.000000] free_area_init_node: node 0, pgdat c0788920, node_mem_map c1060200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34530 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000 [ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d6000 [ 0.000000] PM: Registered nosave memory: 00000000000d6000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1865000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967 [ 0.000000] Kernel command line: root=UUID=ea33e317-eef6-4c39-8c1d-10f464eabd44 ro quiet splash vga=795 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5242240 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0) [ 0.000000] Memory: 1017676k/1048512k available (4579k kernel code, 30000k reserved, 2145k data, 540k init, 139208k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0792000 - 0xc0819000 ( 540 kB) [ 0.000000] .data : 0xc0578c68 - 0xc0791448 (2145 kB) [ 0.000000] .text : 0xc0100000 - 0xc0578c68 (4579 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2799.943 MHz processor. [ 0.000047] Console: colour dummy device 80x25 [ 0.000052] console [tty0] enabled [ 0.000113] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.88 BogoMIPS (lpj=11199772) [ 0.000149] Security Framework initialized [ 0.000188] AppArmor: AppArmor initialized [ 0.000199] Mount-cache hash table entries: 512 [ 0.000426] Initializing cgroup subsys ns [ 0.000433] Initializing cgroup subsys cpuacct [ 0.000439] Initializing cgroup subsys memory [ 0.000448] Initializing cgroup subsys freezer [ 0.000451] Initializing cgroup subsys net_cls [ 0.000477] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.000481] CPU: L2 cache: 512K [ 0.000484] CPU: Hyper-Threading is disabled [ 0.000490] mce: CPU supports 4 MCE banks [ 0.000502] CPU0: Thermal monitoring enabled (TM1) [ 0.000520] Performance Counters: no PMU driver, software counters only. [ 0.000530] Checking 'hlt' instruction... OK. [ 0.016928] SMP alternatives: switching to UP code [ 0.026786] ACPI: Core revision 20090521 [ 0.034761] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.074449] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 [ 0.076001] Brought up 1 CPUs [ 0.076001] Total of 1 processors activated (5599.88 BogoMIPS). [ 0.076001] CPU0 attaching NULL sched-domain. [ 0.076001] Booting paravirtualized kernel on bare hardware [ 0.076001] regulator: core version 0.5 [ 0.076001] Time: 17:12:04 Date: 03/08/10 [ 0.076001] NET: Registered protocol family 16 [ 0.076001] EISA bus registered [ 0.076001] ACPI: bus type pci registered [ 0.076001] PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=3 [ 0.076001] PCI: Using configuration type 1 for base access [ 0.076072] bio: create slab at 0 [ 0.076686] ACPI: EC: Enabling special treatment for EC from MSI. [ 0.076689] ACPI: EC: Look up EC in DSDT [ 0.081984] ACPI: Interpreter enabled [ 0.081992] ACPI: (supports S0 S1 S3 S4 S5) [ 0.082021] ACPI: Using IOAPIC for interrupt routing [ 0.086613] ACPI: Power Resource [URP1] (off) [ 0.086649] ACPI: Power Resource [URP2] (off) [ 0.086683] ACPI: Power Resource [FDDP] (off) [ 0.086717] ACPI: Power Resource [LPTP] (off) [ 0.086867] ACPI: No dock devices found. [ 0.087014] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.087065] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff] [ 0.087193] pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f] [ 0.087251] pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f] [ 0.087309] pci 0000:00:1d.2: reg 20 io port: [0xdc00-0xdc1f] [ 0.087728] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdffffc00-0xdfffffff] [ 0.087788] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.087793] pci 0000:00:1d.7: PME# disabled [ 0.087847] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, [ 0.087849] * this clock source is slow. If you are sure your timer does not have [ 0.087850] * this bug, please use "acpi_pm_good" to disable the workaround [ 0.087894] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO [ 0.087899] pci 0000:00:1f.0: quirk: region 0400-043f claimed by ICH4 GPIO [ 0.087925] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.087933] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.087940] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.087947] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.087954] pci 0000:00:1f.1: reg 20 io port: [0xfc00-0xfc0f] [ 0.087962] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.088034] pci 0000:00:1f.3: reg 20 io port: [0xc00-0xc1f] [ 0.088082] pci 0000:00:1f.5: reg 10 io port: [0xd000-0xd0ff] [ 0.088090] pci 0000:00:1f.5: reg 14 io port: [0xcc00-0xcc3f] [ 0.088097] pci 0000:00:1f.5: reg 18 32bit mmio: [0xdffffa00-0xdffffbff] [ 0.088104] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xdffff900-0xdffff9ff] [ 0.088135] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.088140] pci 0000:00:1f.5: PME# disabled [ 0.088183] pci 0000:01:00.0: reg 10 32bit mmio: [0xc0000000-0xcfffffff] [ 0.088189] pci 0000:01:00.0: reg 14 io port: [0xa800-0xa8ff] [ 0.088196] pci 0000:01:00.0: reg 18 32bit mmio: [0xdfdf0000-0xdfdfffff] [ 0.088212] pci 0000:01:00.0: reg 30 32bit mmio: [0xdfdc0000-0xdfddffff] [ 0.088232] pci 0000:01:00.0: supports D1 D2 [ 0.088261] pci 0000:01:00.1: reg 10 32bit mmio: [0xb0000000-0xbfffffff] [ 0.088268] pci 0000:01:00.1: reg 14 32bit mmio: [0xdfde0000-0xdfdeffff] [ 0.088300] pci 0000:01:00.1: supports D1 D2 [ 0.088341] pci 0000:00:01.0: bridge io port: [0xa000-0xafff] [ 0.088345] pci 0000:00:01.0: bridge 32bit mmio: [0xdfc00000-0xdfdfffff] [ 0.088349] pci 0000:00:01.0: bridge 32bit mmio pref: [0x9f800000-0xdf9fffff] [ 0.088392] pci 0000:03:01.0: reg 10 io port: [0xbc00-0xbcff] [ 0.088399] pci 0000:03:01.0: reg 14 32bit mmio: [0xdfefff00-0xdfefffff] [ 0.088424] pci 0000:03:01.0: reg 30 32bit mmio: [0xdfec0000-0xdfedffff] [ 0.088443] pci 0000:03:01.0: supports D1 D2 [ 0.088446] pci 0000:03:01.0: PME# supported from D1 D2 D3hot D3cold [ 0.088450] pci 0000:03:01.0: PME# disabled [ 0.088487] pci 0000:03:05.0: reg 10 32bit mmio: [0xdfefd000-0xdfefdfff] [ 0.088531] pci 0000:03:05.0: supports D1 D2 [ 0.088533] pci 0000:03:05.0: PME# supported from D0 D1 D2 D3hot [ 0.088538] pci 0000:03:05.0: PME# disabled [ 0.088571] pci 0000:03:05.1: reg 10 32bit mmio: [0xdfefe000-0xdfefefff] [ 0.088615] pci 0000:03:05.1: supports D1 D2 [ 0.088617] pci 0000:03:05.1: PME# supported from D0 D1 D2 D3hot [ 0.088621] pci 0000:03:05.1: PME# disabled [ 0.088655] pci 0000:03:05.2: reg 10 32bit mmio: [0xdfeffe00-0xdfeffeff] [ 0.088699] pci 0000:03:05.2: supports D1 D2 [ 0.088701] pci 0000:03:05.2: PME# supported from D0 D1 D2 D3hot [ 0.088705] pci 0000:03:05.2: PME# disabled [ 0.088748] pci 0000:00:1e.0: transparent bridge [ 0.088753] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff] [ 0.088758] pci 0000:00:1e.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff] [ 0.088763] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xdfa00000-0xdfafffff] [ 0.088775] pci_bus 0000:00: on NUMA node 0 [ 0.088780] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.088884] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT] [ 0.091855] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.091967] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.092091] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.092254] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.092362] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.092472] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.092582] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.092748] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.092995] SCSI subsystem initialized [ 0.093095] libata version 3.00 loaded. [ 0.093194] usbcore: registered new interface driver usbfs [ 0.093210] usbcore: registered new interface driver hub [ 0.093245] usbcore: registered new device driver usb [ 0.093411] ACPI: WMI: Mapper loaded [ 0.093414] PCI: Using ACPI for IRQ routing [ 0.093622] Bluetooth: Core ver 2.15 [ 0.093663] NET: Registered protocol family 31 [ 0.093665] Bluetooth: HCI device and connection manager initialized [ 0.093669] Bluetooth: HCI socket layer initialized [ 0.093671] NetLabel: Initializing [ 0.093673] NetLabel: domain hash size = 128 [ 0.093675] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.093691] NetLabel: unlabeled traffic allowed by default [ 0.095953] pnp: PnP ACPI init [ 0.096031] ACPI: bus type pnp registered [ 0.099584] pnp: PnP ACPI: found 13 devices [ 0.099588] ACPI: ACPI bus type pnp unregistered [ 0.099594] PnPBIOS: Disabled by ACPI PNP [ 0.099611] system 00:01: ioport range 0x290-0x297 has been reserved [ 0.099615] system 00:01: ioport range 0x400-0x43f has been reserved [ 0.099619] system 00:01: ioport range 0x3f0-0x3f1 has been reserved [ 0.099629] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.099633] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.099637] system 00:01: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.134405] AppArmor: AppArmor Filesystem Enabled [ 0.134424] pci 0000:03:01.0: BAR 6: address space collision on of device [0xdfec0000-0xdfedffff] [ 0.134450] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.134454] pci 0000:00:01.0: IO window: 0xa000-0xafff [ 0.134458] pci 0000:00:01.0: MEM window: 0xdfc00000-0xdfdfffff [ 0.134463] pci 0000:00:01.0: PREFETCH window: 0x9f800000-0xdf9fffff [ 0.134470] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.134475] pci 0000:00:1e.0: IO window: 0xb000-0xbfff [ 0.134481] pci 0000:00:1e.0: MEM window: 0xdfe00000-0xdfefffff [ 0.134486] pci 0000:00:1e.0: PREFETCH window: 0xdfa00000-0xdfafffff [ 0.134503] pci 0000:00:1e.0: setting latency timer to 64 [ 0.134509] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.134512] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.134515] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] [ 0.134518] pci_bus 0000:01: resource 1 mem: [0xdfc00000-0xdfdfffff] [ 0.134521] pci_bus 0000:01: resource 2 pref mem [0x9f800000-0xdf9fffff] [ 0.134524] pci_bus 0000:03: resource 0 io: [0xb000-0xbfff] [ 0.134527] pci_bus 0000:03: resource 1 mem: [0xdfe00000-0xdfefffff] [ 0.134530] pci_bus 0000:03: resource 2 pref mem [0xdfa00000-0xdfafffff] [ 0.134533] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.134536] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff] [ 0.134585] NET: Registered protocol family 2 [ 0.134701] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.135173] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.136568] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.137363] TCP: Hash tables configured (established 131072 bind 65536) [ 0.137372] TCP reno registered [ 0.137575] NET: Registered protocol family 1 [ 0.137682] Trying to unpack rootfs image as initramfs... [ 0.402980] Freeing initrd memory: 7863k freed [ 0.416227] cpufreq-nforce2: No nForce2 chipset. [ 0.416267] Scanning for low memory corruption every 60 seconds [ 0.416418] audit: initializing netlink socket (disabled) [ 0.416445] type=2000 audit(1268068324.416:1): initialized [ 0.425029] highmem bounce pool size: 64 pages [ 0.425037] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.426578] VFS: Disk quotas dquot_6.5.2 [ 0.426648] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.427295] fuse init (API version 7.12) [ 0.427393] msgmni has been set to 1731 [ 0.427650] alg: No test for stdrng (krng) [ 0.427668] io scheduler noop registered [ 0.427670] io scheduler anticipatory registered [ 0.427673] io scheduler deadline registered [ 0.427731] io scheduler cfq registered (default) [ 0.448054] pci 0000:01:00.0: Boot video device [ 0.448200] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.448230] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.448388] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.448394] ACPI: Power Button [PWRF] [ 0.448456] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.448459] ACPI: Power Button [PWRB] [ 0.448521] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.448528] ACPI: Sleep Button [SLPB] [ 0.448735] processor LNXCPU:00: registered as cooling_device0 [ 0.448739] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.450893] isapnp: Scanning for PnP cards... [ 0.640056] Switched to high resolution mode on CPU 0 [ 0.804731] isapnp: No Plug & Play device found [ 0.806045] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.806161] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.806256] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.806607] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.806730] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.807852] brd: module loaded [ 0.808381] loop: module loaded [ 0.808497] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.808628] ata_piix 0000:00:1f.1: version 2.13 [ 0.808654] alloc irq_desc for 18 on node -1 [ 0.808656] alloc kstat_irqs on node -1 [ 0.808667] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.808741] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.808883] scsi0 : ata_piix [ 0.809024] scsi1 : ata_piix [ 0.810938] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 0.810941] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 0.812076] Fixed MDIO Bus: probed [ 0.812122] PPP generic driver version 2.4.2 [ 0.812261] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.812292] alloc irq_desc for 23 on node -1 [ 0.812295] alloc kstat_irqs on node -1 [ 0.812303] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.812326] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.812331] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.812366] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.816274] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.816282] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 0.816301] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdffffc00 [ 0.832014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.832123] usb usb1: configuration #1 chosen from 1 choice [ 0.832158] hub 1-0:1.0: USB hub found [ 0.832169] hub 1-0:1.0: 6 ports detected [ 0.832235] alloc irq_desc for 19 on node -1 [ 0.832238] alloc kstat_irqs on node -1 [ 0.832246] ehci_hcd 0000:03:05.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 0.832260] ehci_hcd 0000:03:05.2: EHCI Host Controller [ 0.832320] ehci_hcd 0000:03:05.2: new USB bus registered, assigned bus number 2 [ 0.856041] ehci_hcd 0000:03:05.2: irq 19, io mem 0xdfeffe00 [ 0.868011] ehci_hcd 0000:03:05.2: USB 2.0 started, EHCI 0.95 [ 0.868082] usb usb2: configuration #1 chosen from 1 choice [ 0.868112] hub 2-0:1.0: USB hub found [ 0.868123] hub 2-0:1.0: 5 ports detected [ 0.868192] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.868222] alloc irq_desc for 17 on node -1 [ 0.868224] alloc kstat_irqs on node -1 [ 0.868231] ohci_hcd 0000:03:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.868243] ohci_hcd 0000:03:05.0: OHCI Host Controller [ 0.868282] ohci_hcd 0000:03:05.0: new USB bus registered, assigned bus number 3 [ 0.868306] ohci_hcd 0000:03:05.0: irq 17, io mem 0xdfefd000 [ 1.430434] usb usb3: configuration #1 chosen from 1 choice [ 1.430465] hub 3-0:1.0: USB hub found [ 1.430477] hub 3-0:1.0: 3 ports detected [ 1.430533] ohci_hcd 0000:03:05.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 1.430546] ohci_hcd 0000:03:05.1: OHCI Host Controller [ 1.430584] ohci_hcd 0000:03:05.1: new USB bus registered, assigned bus number 4 [ 1.430620] ohci_hcd 0000:03:05.1: irq 18, io mem 0xdfefe000 [ 1.444288] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4082B, A207, max UDMA/33 [ 1.444331] ata2.01: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33 [ 1.460192] ata2.00: configured for UDMA/33 [ 1.473549] ata1.00: ATA-7: ST3320820A, 3.AAE, max UDMA/100 [ 1.473553] ata1.00: 625142448 sectors, multi 16: LBA48 [ 1.476245] ata2.01: configured for UDMA/33 [ 1.990279] usb usb4: configuration #1 chosen from 1 choice [ 1.990314] hub 4-0:1.0: USB hub found [ 1.990327] hub 4-0:1.0: 2 ports detected [ 1.990380] uhci_hcd: USB Universal Host Controller Interface driver [ 1.990449] alloc irq_desc for 16 on node -1 [ 1.990452] alloc kstat_irqs on node -1 [ 1.990460] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.990469] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.990473] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.990515] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.990548] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d400 [ 1.990641] usb usb5: configuration #1 chosen from 1 choice [ 1.990673] hub 5-0:1.0: USB hub found [ 1.990683] hub 5-0:1.0: 2 ports detected [ 1.990729] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.990736] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.990740] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.990774] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.990797] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800 [ 1.990886] usb usb6: configuration #1 chosen from 1 choice [ 1.990916] hub 6-0:1.0: USB hub found [ 1.990928] hub 6-0:1.0: 2 ports detected [ 1.990973] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.990980] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.990984] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.991024] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.991047] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000dc00 [ 1.991142] usb usb7: configuration #1 chosen from 1 choice [ 1.991171] hub 7-0:1.0: USB hub found [ 1.991183] hub 7-0:1.0: 2 ports detected [ 1.991291] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.993336] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.993344] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.993422] mice: PS/2 mouse device common for all mice [ 1.993555] rtc_cmos 00:03: RTC can wake from S4 [ 1.993601] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.993624] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 1.993761] device-mapper: uevent: version 1.0.3 [ 1.993894] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.993992] device-mapper: multipath: version 1.1.0 loaded [ 1.993995] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.994148] EISA: Probing bus 0 at eisa.0 [ 1.994186] EISA: Detected 0 cards. [ 1.994245] cpuidle: using governor ladder [ 1.994248] cpuidle: using governor menu [ 1.994863] TCP cubic registered [ 1.995001] NET: Registered protocol family 10 [ 1.995503] lo: Disabled Privacy Extensions [ 1.995870] NET: Registered protocol family 17 [ 1.995898] Bluetooth: L2CAP ver 2.13 [ 1.995900] Bluetooth: L2CAP socket layer initialized [ 1.995904] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.995905] Bluetooth: SCO socket layer initialized [ 1.995964] Bluetooth: RFCOMM TTY layer initialized [ 1.995967] Bluetooth: RFCOMM socket layer initialized [ 1.995969] Bluetooth: RFCOMM ver 1.11 [ 1.996048] Using IPI No-Shortcut mode [ 1.996161] PM: Resume from disk failed. [ 1.996186] registered taskstats version 1 [ 1.996323] Magic number: 2:552:238 [ 1.996420] rtc_cmos 00:03: setting system clock to 2010-03-08 17:12:06 UTC (1268068326) [ 1.996424] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.996426] EDD information not available. [ 2.031227] ata1.00: configured for UDMA/100 [ 2.031373] scsi 0:0:0:0: Direct-Access ATA ST3320820A 3.AA PQ: 0 ANSI: 5 [ 2.031541] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.031595] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.031651] sd 0:0:0:0: [sda] Write Protect is off [ 2.031655] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.031683] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.031839] sda: [ 2.036065] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4082B A207 PQ: 0 ANSI: 5 [ 2.040649] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.040653] Uniform CD-ROM driver Revision: 3.20 [ 2.040760] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.040830] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.041880] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.050813] scsi 1:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5 [ 2.056799] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray [ 2.056903] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 2.056962] sr 1:0:1:0: Attached scsi generic sg2 type 5 [ 2.079140] sda1 sda2 < sda5 > [ 2.104699] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.104722] Freeing unused kernel memory: 540k freed [ 2.105534] Write protecting the kernel text: 4580k [ 2.105564] Write protecting the kernel read-only data: 1840k [ 2.356144] Linux agpgart interface v0.103 [ 2.360103] agpgart-intel 0000:00:00.0: Intel 845G Chipset [ 2.362983] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe0000000 [ 2.365565] Floppy drive(s): fd0 is 1.44M [ 2.417932] FDC 0 is a post-1991 82077 [ 2.544443] [drm] Initialized drm 1.1.0 20060810 [ 2.574149] [drm] radeon default to kernel modesetting DISABLED. [ 2.574202] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.574378] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0 [ 2.580844] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.580873] r8169 0000:03:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.580907] r8169 0000:03:01.0: no PCI Express capability [ 2.581642] eth0: RTL8110s at 0xf827ef00, 00:40:f4:cc:ef:2e, XID 04000000 IRQ 17 [ 2.629005] usb 3-3: new full speed USB device using ohci_hcd and address 2 [ 2.704617] vesafb: framebuffer at 0xc0000000, mapped to 0xf8300000, using 7680k, total 131072k [ 2.704623] vesafb: mode is 1280x1024x24, linelength=3840, pages=33 [ 2.704625] vesafb: protected mode interface info at c000:5781 [ 2.704628] vesafb: pmi: set display start = c00c5815, set palette = c00c5861 [ 2.704631] vesafb: pmi: ports = a810 a816 a854 a838 a83c a85c a800 a804 a8b0 a8b2 a8b4 [ 2.704640] vesafb: scrolling: redraw [ 2.704645] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 2.704717] fb0: VESA VGA frame buffer device [ 2.711790] Console: switching to colour frame buffer device 160x64 [ 2.947011] usb 3-3: configuration #1 chosen from 1 choice [ 2.950998] hub 3-3:1.0: USB hub found [ 2.953034] hub 3-3:1.0: 3 ports detected [ 3.148464] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 3.159475] xor: automatically using best checksumming function: pIII_sse [ 3.176006] pIII_sse : 3556.000 MB/sec [ 3.176010] xor: using function: pIII_sse (3556.000 MB/sec) [ 3.180386] device-mapper: dm-raid45: initialized v0.2594b [ 3.299441] usb 5-1: not running at top speed; connect to a high speed hub [ 3.337575] usb 5-1: configuration #1 chosen from 1 choice [ 3.368705] usbcore: registered new interface driver hiddev [ 3.368764] usbcore: registered new interface driver usbhid [ 3.368768] usbhid: v2.6:USB HID core driver [ 3.592025] usb 5-2: new full speed USB device using uhci_hcd and address 3 [ 3.766520] usb 5-2: configuration #1 chosen from 1 choice [ 3.816921] PM: Starting manual resume from disk [ 3.816928] PM: Resume from partition 8:5 [ 3.816930] PM: Checking hibernation image. [ 3.828011] PM: Resume from disk failed. [ 3.868015] usb 3-3.1: new full speed USB device using ohci_hcd and address 3 [ 3.932058] kjournald starting. Commit interval 5 seconds [ 3.932077] EXT3-fs: mounted filesystem with writeback data mode. [ 4.016163] usb 3-3.1: configuration #1 chosen from 1 choice [ 4.037582] Initializing USB Mass Storage driver... [ 4.037763] scsi2 : SCSI emulation for USB Mass Storage devices [ 4.037869] usbcore: registered new interface driver usb-storage [ 4.037873] USB Mass Storage support registered. [ 4.044016] usb-storage: device found at 3 [ 4.044020] usb-storage: waiting for device to settle before scanning [ 4.115132] usb 3-3.2: new full speed USB device using ohci_hcd and address 4 [ 4.268145] usb 3-3.2: configuration #1 chosen from 1 choice [ 4.276115] scsi3 : SCSI emulation for USB Mass Storage devices [ 4.276247] usb-storage: device found at 4 [ 4.276250] usb-storage: waiting for device to settle before scanning [ 4.376093] usb 3-3.3: new full speed USB device using ohci_hcd and address 5 [ 4.544141] usb 3-3.3: configuration #1 chosen from 1 choice [ 4.554978] scsi4 : SCSI emulation for USB Mass Storage devices [ 4.555472] usb-storage: device found at 5 [ 4.555475] usb-storage: waiting for device to settle before scanning [ 5.736142] type=1505 audit(1268068330.239:2): operation="profile_load" pid=410 name=/usr/share/gdm/guest-session/Xsession [ 5.769017] type=1505 audit(1268068330.271:3): operation="profile_load" pid=411 name=/sbin/dhclient3 [ 5.769610] type=1505 audit(1268068330.271:4): operation="profile_load" pid=411 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 5.769934] type=1505 audit(1268068330.271:5): operation="profile_load" pid=411 name=/usr/lib/connman/scripts/dhclient-script [ 5.855150] type=1505 audit(1268068330.355:6): operation="profile_load" pid=412 name=/usr/bin/evince [ 5.877532] type=1505 audit(1268068330.379:7): operation="profile_load" pid=412 name=/usr/bin/evince-previewer [ 5.883546] type=1505 audit(1268068330.383:8): operation="profile_load" pid=412 name=/usr/bin/evince-thumbnailer [ 5.936204] type=1505 audit(1268068330.439:9): operation="profile_load" pid=414 name=/usr/bin/freshclam [ 5.984268] type=1505 audit(1268068330.487:10): operation="profile_load" pid=415 name=/usr/lib/cups/backend/cups-pdf [ 5.984976] type=1505 audit(1268068330.487:11): operation="profile_load" pid=415 name=/usr/sbin/cupsd [ 9.052069] usb-storage: device scan complete [ 9.206993] scsi 2:0:0:0: Direct-Access eUSB Compact Flash 5.09 PQ: 0 ANSI: 2 [ 9.280076] usb-storage: device scan complete [ 9.449739] scsi 3:0:0:0: Direct-Access eUSB Secure Digital 5.06 PQ: 0 ANSI: 2 [ 9.564068] usb-storage: device scan complete [ 9.652054] scsi 4:0:0:0: Direct-Access eUSB PCCARD Flash 5.05 PQ: 0 ANSI: 2 [ 10.268055] scsi 2:0:0:1: Direct-Access eUSB SmartMedia 5.09 PQ: 0 ANSI: 2 [ 10.269202] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 10.269315] sd 2:0:0:1: Attached scsi generic sg4 type 0 [ 10.328087] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 10.346701] sd 2:0:0:1: [sdc] Attached SCSI removable disk [ 10.514905] scsi 3:0:0:1: Direct-Access eUSB Memory Stick 5.06 PQ: 0 ANSI: 2 [ 10.515421] sd 3:0:0:0: Attached scsi generic sg5 type 0 [ 10.515547] sd 3:0:0:1: Attached scsi generic sg6 type 0 [ 10.515713] sd 4:0:0:0: Attached scsi generic sg7 type 0 [ 10.564094] sd 4:0:0:0: [sdf] Attached SCSI removable disk [ 10.588046] sd 3:0:0:0: [sdd] Attached SCSI removable disk [ 10.608819] sd 3:0:0:1: [sde] Attached SCSI removable disk [ 29.244920] Adding 3028212k swap on /dev/sda5. Priority:-1 extents:1 across:3028212k [ 29.284279] udev: starting version 147 [ 29.346897] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 29.351988] lp: driver loaded but no devices found [ 29.364224] intel_rng: FWH not detected [ 29.463365] parport_pc 00:0b: reported by Plug and Play ACPI [ 29.463469] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 29.549509] EXT3 FS on sda1, internal journal [ 29.749846] lp0: using parport0 (interrupt-driven). [ 30.053072] gameport: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x200, speed 877kHz [ 30.265416] Linux video capture interface: v2.00 [ 30.304482] gspca: main v2.6.0 registered [ 30.305846] gspca: probing 17a1:0128 [ 30.315645] ppdev: user-space parallel port driver [ 30.340614] t613: sensor om6802 [ 30.394032] ip_tables: (C) 2000-2006 Netfilter Core Team [ 30.429256] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 30.429297] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 30.535531] usbcore: registered new interface driver snd-usb-audio [ 30.537360] input: Yealink usb-p1k as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.3/input/input5 [ 30.564368] usbcore: registered new interface driver yealink [ 30.564374] yealink: yld-20051230:Yealink phone driver [ 30.656028] psmouse serio1: ID: 10 00 64 [ 30.756086] intel8x0_measure_ac97_clock: measured 54965 usecs (2648 samples) [ 30.756092] intel8x0: clocking to 48000 [ 30.844130] gspca: probe ok [ 30.844164] usbcore: registered new interface driver t613 [ 30.844168] t613: registered [ 31.365569] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6 [ 32.185167] r8169: eth0: link up [ 35.259479] __ratelimit: 18 callbacks suppressed [ 35.259484] type=1505 audit(1268068359.759:18): operation="profile_replace" pid=1235 name=/usr/share/gdm/guest-session/Xsession [ 35.274182] type=1505 audit(1268068359.775:19): operation="profile_replace" pid=1236 name=/sbin/dhclient3 [ 35.274776] type=1505 audit(1268068359.775:20): operation="profile_replace" pid=1236 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 35.275099] type=1505 audit(1268068359.775:21): operation="profile_replace" pid=1236 name=/usr/lib/connman/scripts/dhclient-script [ 35.292154] type=1505 audit(1268068359.795:22): operation="profile_replace" pid=1237 name=/usr/bin/evince [ 35.308887] type=1505 audit(1268068359.811:23): operation="profile_replace" pid=1237 name=/usr/bin/evince-previewer [ 35.315020] type=1505 audit(1268068359.815:24): operation="profile_replace" pid=1237 name=/usr/bin/evince-thumbnailer [ 35.362567] type=1505 audit(1268068359.863:25): operation="profile_replace" pid=1239 name=/usr/bin/freshclam [ 35.365588] type=1505 audit(1268068359.867:26): operation="profile_replace" pid=1252 name=/usr/lib/cups/backend/cups-pdf [ 35.366292] type=1505 audit(1268068359.867:27): operation="profile_replace" pid=1252 name=/usr/sbin/cupsd [ 36.881050] microcode: CPU0 sig=0xf29, pf=0x4, revision=0x0 [ 36.881057] platform microcode: firmware: requesting intel-ucode/0f-02-09 [ 38.356982] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 38.357005] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 38.357040] pci 0000:01:00.0: putting AGP V2 device into 4x mode [ 38.532887] Microcode Update Driver: v2.00 , Peter Oruba [ 38.606995] microcode: CPU0 updated to revision 0x2e, date = 2004-08-11 [ 38.836086] [drm] Setting GART location based on new memory map [ 38.836097] [drm] Loading R300 Microcode [ 38.836147] [drm] Num pipes: 1 [ 38.836155] [drm] writeback test succeeded in 1 usecs [ 40.479667] __ratelimit: 24 callbacks suppressed [ 40.479671] type=1503 audit(1268068364.279:36): operation="open" pid=1627 parent=1626 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 41.505863] type=1503 audit(1268068365.307:37): operation="open" pid=1639 parent=1638 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 42.232029] eth0: no IPv6 routers present [ 42.602694] type=1503 audit(1268068366.403:38): operation="open" pid=1688 parent=1687 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 43.635578] type=1503 audit(1268068367.435:39): operation="open" pid=1722 parent=1721 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 44.697950] type=1503 audit(1268068368.499:40): operation="open" pid=1746 parent=1745 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 45.743482] type=1503 audit(1268068369.543:41): operation="open" pid=1786 parent=1785 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 46.812358] type=1503 audit(1268068370.615:42): operation="open" pid=1803 parent=1802 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 47.866069] type=1503 audit(1268068371.667:43): operation="open" pid=1818 parent=1817 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 48.934529] type=1503 audit(1268068372.735:44): operation="open" pid=1832 parent=1831 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 49.988546] type=1503 audit(1268068373.791:45): operation="open" pid=1842 parent=1841 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 51.023641] type=1503 audit(1268068374.823:46): operation="open" pid=1852 parent=1851 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 52.062748] type=1503 audit(1268068375.863:47): operation="open" pid=1862 parent=1861 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 53.089604] type=1503 audit(1268068376.891:48): operation="open" pid=1872 parent=1871 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 54.116126] type=1503 audit(1268068377.919:49): operation="open" pid=1882 parent=1881 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 54.140968] type=1503 audit(1268068377.943:50): operation="open" pid=1891 parent=1890 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 62.402156] UDF-fs: No VRS found [ 62.402163] UDF-fs: No partition found (1) [ 62.411691] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 62.411930] ISOFS: changing to secondary root [ 69.082494] UDF-fs: No VRS found [ 69.082500] UDF-fs: No partition found (1) [ 69.129814] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 69.195649] ISOFS: changing to secondary root [ 1766.885364] yealink: urb_irq_callback - urb status -108 [ 1777.856454] process `skype' is using obsolete setsockopt SO_BSDCOMPAT