[ 0.000000] Linux version 4.15.0-14-generic (root@xenial) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #15~lp1758507 SMP Fri Mar 30 15:28:15 CST 2018 (Ubuntu 4.15.0-14.15~lp1758507-generic 4.15.14) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-14-generic root=UUID=bc171dce-b703-44f6-8244-22b6b3b1dc33 ro video=SVIDEO-1:d consoleblank=300 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf67ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf680000-0x00000000bf68ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf690000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: FUJITSU SIEMENS ESPRIMO Mobile U9200/S11D, BIOS 1.11 - 067 - 1566 04/22/2008 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 000000000 mask F00000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 0BF700000 mask FFFF00000 uncachable [ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 4087M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 5 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xbf700000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbf680 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f77a0-0x000f77af] mapped at [ (ptrval)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576 [ 0.000000] BRK [0x12e53d000, 0x12e53dfff] PGTABLE [ 0.000000] BRK [0x12e53e000, 0x12e53efff] PGTABLE [ 0.000000] BRK [0x12e53f000, 0x12e53ffff] PGTABLE [ 0.000000] BRK [0x12e540000, 0x12e540fff] PGTABLE [ 0.000000] BRK [0x12e541000, 0x12e541fff] PGTABLE [ 0.000000] BRK [0x12e542000, 0x12e542fff] PGTABLE [ 0.000000] BRK [0x12e543000, 0x12e543fff] PGTABLE [ 0.000000] BRK [0x12e544000, 0x12e544fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3178f000-0x34bbefff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F7710 000024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 0x00000000BF686FBB 00008C (v01 FSC PC 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 0x00000000BF68ED0C 0000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 0x00000000BF688502 006796 (v02 IEC___ S11_____ 06040000 INTL 20050624) [ 0.000000] ACPI: FACS 0x00000000BF68FFC0 000040 [ 0.000000] ACPI: FACS 0x00000000BF68FFC0 000040 [ 0.000000] ACPI: APIC 0x00000000BF68EE00 000068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: HPET 0x00000000BF68EE68 000038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 0x00000000BF68EEA0 00003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: SLIT 0x00000000BF68EEDC 00003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: TCPA 0x00000000BF68EF18 000032 (v01 Intel CRESTLN 06040000 00005A52) [ 0.000000] ACPI: TMOR 0x00000000BF68EF4A 000026 (v01 PTLTD 06040000 PTL 00000003) [ 0.000000] ACPI: APIC 0x00000000BF68EF70 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 0x00000000BF68EFD8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 0x00000000BF688225 0002DD (v01 SataRe SataAhci 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 0x00000000BF6875D3 00025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 0x00000000BF68752D 0000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 0x00000000BF687047 0004E6 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x13ffd5000-0x13fffffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bf67ffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff] [ 0.000000] On node 0 totalpages: 1046046 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12186 pages used for memmap [ 0.000000] DMA32 zone: 779904 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] Reserving Intel graphics memory at 0x00000000bf800000-0x00000000bfffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff] [ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf680000-0xbf68ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf690000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfed13fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u1048576 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1029679 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-14-generic root=UUID=bc171dce-b703-44f6-8244-22b6b3b1dc33 ro video=SVIDEO-1:d consoleblank=300 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3970632K/4184184K available (12300K kernel code, 2471K rwdata, 4240K rodata, 2400K init, 2416K bss, 213552K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39212 entries in 154 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x678F (20170831/psloop-247) [ 0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.000000] HPET config register value = 0xFFFFFFFF. Disabling HPET [ 0.004000] APIC: Switch to symmetric I/O mode setup [ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.024000] tsc: Fast TSC calibration using PIT [ 0.028000] tsc: Detected 2493.777 MHz processor [ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4987.55 BogoMIPS (lpj=9975108) [ 0.028000] pid_max: default: 32768 minimum: 301 [ 0.028000] Security Framework initialized [ 0.028000] Yama: becoming mindful. [ 0.028000] AppArmor: AppArmor initialized [ 0.032181] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.033246] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.033302] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.033341] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.033664] CPU: Physical Processor ID: 0 [ 0.033667] CPU: Processor Core ID: 0 [ 0.033670] mce: CPU supports 6 MCE banks [ 0.033680] process: using mwait in idle threads [ 0.033687] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.033689] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.033693] Spectre V2 : Mitigation: Full generic retpoline [ 0.033853] Freeing SMP alternatives memory: 36K [ 0.040000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz (family: 0x6, model: 0x17, stepping: 0x6) [ 0.040000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.040000] ... version: 2 [ 0.040000] ... bit width: 40 [ 0.040000] ... generic registers: 2 [ 0.040000] ... value mask: 000000ffffffffff [ 0.040000] ... max period: 000000007fffffff [ 0.040000] ... fixed-purpose events: 3 [ 0.040000] ... event mask: 0000000700000003 [ 0.040000] Hierarchical SRCU implementation. [ 0.040000] smp: Bringing up secondary CPUs ... [ 0.040000] x86: Booting SMP configuration: [ 0.040000] .... node #0, CPUs: #1 [ 0.040105] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.040152] smp: Brought up 1 node, 2 CPUs [ 0.040152] smpboot: Max logical packages: 1 [ 0.040152] smpboot: Total of 2 processors activated (9975.10 BogoMIPS) [ 0.044095] devtmpfs: initialized [ 0.044096] x86/mm: Memory block size: 128MB [ 0.044328] evm: security.selinux [ 0.044331] evm: security.SMACK64 [ 0.044334] evm: security.SMACK64EXEC [ 0.044336] evm: security.SMACK64TRANSMUTE [ 0.044339] evm: security.SMACK64MMAP [ 0.044341] evm: security.apparmor [ 0.044343] evm: security.ima [ 0.044345] evm: security.capability [ 0.044413] PM: Registering ACPI NVS region [mem 0xbf680000-0xbf68ffff] (65536 bytes) [ 0.044478] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.044478] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.044478] pinctrl core: initialized pinctrl subsystem [ 0.044478] RTC time: 9:08:38, date: 03/30/18 [ 0.044478] NET: Registered protocol family 16 [ 0.044478] audit: initializing netlink subsys (disabled) [ 0.044478] audit: type=2000 audit(1522400917.044:1): state=initialized audit_enabled=0 res=1 [ 0.044478] cpuidle: using governor ladder [ 0.044478] cpuidle: using governor menu [ 0.044478] Simple Boot Flag at 0x36 set to 0x1 [ 0.044478] ACPI: bus type PCI registered [ 0.044478] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.044478] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.044478] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.044478] PCI: Using configuration type 1 for base access [ 0.045695] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.048079] ACPI: Added _OSI(Module Device) [ 0.048083] ACPI: Added _OSI(Processor Device) [ 0.048085] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.048088] ACPI: Added _OSI(Processor Aggregator Device) [ 0.050181] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.052145] ACPI: Dynamic OEM Table Load: [ 0.052155] ACPI: SSDT 0xFFFF8B223A55AC00 0002BC (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.052522] ACPI: Dynamic OEM Table Load: [ 0.052531] ACPI: SSDT 0xFFFF8B223A4F8800 0005EA (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.053213] ACPI: Dynamic OEM Table Load: [ 0.053221] ACPI: SSDT 0xFFFF8B223A535D00 0000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.053438] ACPI: Dynamic OEM Table Load: [ 0.053446] ACPI: SSDT 0xFFFF8B223A5753C0 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.054032] ACPI: EC: EC started [ 0.054036] ACPI: EC: interrupt blocked [ 0.055752] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC [ 0.055757] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.055762] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions [ 0.055765] ACPI: Interpreter enabled [ 0.055789] ACPI: (supports S0 S3 S4 S5) [ 0.055792] ACPI: Using IOAPIC for interrupt routing [ 0.055824] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.056255] ACPI: GPE 0x18 active on init [ 0.056265] ACPI: Enabled 11 GPEs in block 00 to 1F [ 1.088105] acpi SADDLEST:00: ACPI dock station (docks/bays count: 1) [ 1.096809] ACPI: Power Resource [FN00] (on) [ 1.632648] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.632657] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.632666] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 1.633469] PCI host bridge to bus 0000:00 [ 1.633475] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.633479] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.633483] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.633487] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 1.633491] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 1.633496] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 1.633500] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 1.633505] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.633517] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000 [ 1.633657] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000 [ 1.633671] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfc0fffff 64bit] [ 1.633678] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.633683] pci 0000:00:02.0: reg 0x20: [io 0x1c00-0x1c07] [ 1.633809] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000 [ 1.633820] pci 0000:00:02.1: reg 0x10: [mem 0xfc100000-0xfc1fffff 64bit] [ 1.633974] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300 [ 1.634029] pci 0000:00:1a.0: reg 0x20: [io 0x1840-0x185f] [ 1.634167] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300 [ 1.634222] pci 0000:00:1a.1: reg 0x20: [io 0x1860-0x187f] [ 1.634370] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320 [ 1.634396] pci 0000:00:1a.7: reg 0x10: [mem 0xfc406000-0xfc4063ff] [ 1.634495] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 1.634614] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300 [ 1.634638] pci 0000:00:1b.0: reg 0x10: [mem 0xfc400000-0xfc403fff 64bit] [ 1.634724] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.634848] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 [ 1.634942] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.635069] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400 [ 1.635168] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.635294] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400 [ 1.635387] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 1.635514] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 [ 1.635569] pci 0000:00:1d.0: reg 0x20: [io 0x1880-0x189f] [ 1.635707] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 [ 1.635763] pci 0000:00:1d.1: reg 0x20: [io 0x18a0-0x18bf] [ 1.635898] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300 [ 1.635953] pci 0000:00:1d.2: reg 0x20: [io 0x18c0-0x18df] [ 1.636105] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 [ 1.636131] pci 0000:00:1d.7: reg 0x10: [mem 0xfc406400-0xfc4067ff] [ 1.636231] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.636344] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 1.636521] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100 [ 1.636625] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 1.636631] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 1.636640] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 1.636646] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 000f) [ 1.636653] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0300 (mask 000f) [ 1.636795] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a [ 1.636815] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] [ 1.636826] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] [ 1.636837] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007] [ 1.636847] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003] [ 1.636858] pci 0000:00:1f.1: reg 0x20: [io 0x1830-0x183f] [ 1.636882] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.636887] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.636891] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 1.636894] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.637013] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601 [ 1.637036] pci 0000:00:1f.2: reg 0x10: [io 0x1c18-0x1c1f] [ 1.637045] pci 0000:00:1f.2: reg 0x14: [io 0x1c0c-0x1c0f] [ 1.637055] pci 0000:00:1f.2: reg 0x18: [io 0x1c10-0x1c17] [ 1.637064] pci 0000:00:1f.2: reg 0x1c: [io 0x1c08-0x1c0b] [ 1.637074] pci 0000:00:1f.2: reg 0x20: [io 0x1c20-0x1c3f] [ 1.637084] pci 0000:00:1f.2: reg 0x24: [mem 0xfc405000-0xfc4057ff] [ 1.637135] pci 0000:00:1f.2: PME# supported from D3hot [ 1.637246] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500 [ 1.637265] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff] [ 1.637300] pci 0000:00:1f.3: reg 0x20: [io 0x18e0-0x18ff] [ 1.637493] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 1.637500] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 1.637504] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff] [ 1.637511] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 1.637615] pci 0000:04:00.0: [11ab:4363] type 00 class 0x020000 [ 1.637654] pci 0000:04:00.0: reg 0x10: [mem 0xf8000000-0xf8003fff 64bit] [ 1.637668] pci 0000:04:00.0: reg 0x18: [io 0x3000-0x30ff] [ 1.637718] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 1.637802] pci 0000:04:00.0: supports D1 D2 [ 1.637803] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.648022] pci 0000:00:1c.1: PCI bridge to [bus 04-05] [ 1.648029] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 1.648033] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff] [ 1.648040] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 1.648147] pci 0000:06:00.0: [8086:4229] type 00 class 0x028000 [ 1.648198] pci 0000:06:00.0: reg 0x10: [mem 0xfa000000-0xfa001fff 64bit] [ 1.648366] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.660027] pci 0000:00:1c.2: PCI bridge to [bus 06-07] [ 1.660034] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 1.660038] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff] [ 1.660045] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref] [ 1.660186] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode) [ 1.660201] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 1.660203] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 1.660204] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 1.660206] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 1.660208] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 1.660210] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 1.660211] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode) [ 1.660419] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 1.660519] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 1.660618] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 1.660716] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 1.660813] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 1.660912] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 1.661013] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 1.661112] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 1.661800] ACPI Warning: GPE type mismatch (level/edge) (20170831/evxface-826) [ 1.661808] ACPI: EC: interrupt unblocked [ 1.661817] ACPI: EC: event unblocked [ 1.661826] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 1.661831] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events [ 1.662112] SCSI subsystem initialized [ 1.662126] libata version 3.00 loaded. [ 1.662126] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 1.662126] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.662126] pci 0000:00:02.0: vgaarb: bridge control possible [ 1.662126] vgaarb: loaded [ 1.662126] ACPI: bus type USB registered [ 1.662126] usbcore: registered new interface driver usbfs [ 1.662126] usbcore: registered new interface driver hub [ 1.662126] usbcore: registered new device driver usb [ 1.662126] EDAC MC: Ver: 3.0.0 [ 1.662126] PCI: Using ACPI for IRQ routing [ 1.671830] PCI: pci_cache_line_size set to 64 bytes [ 1.671894] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 1.671895] e820: reserve RAM buffer [mem 0xbf680000-0xbfffffff] [ 1.672011] NetLabel: Initializing [ 1.672015] NetLabel: domain hash size = 128 [ 1.672017] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.672041] NetLabel: unlabeled traffic allowed by default [ 1.672124] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.672134] hpet clockevent registered [ 1.672139] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 1.672146] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.672152] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 1.674169] clocksource: Switched to clocksource hpet [ 1.689362] VFS: Disk quotas dquot_6.6.0 [ 1.689397] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.689567] AppArmor: AppArmor Filesystem Enabled [ 1.689622] pnp: PnP ACPI init [ 2.240341] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.240347] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved [ 2.240352] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 2.240356] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 2.240360] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 2.240364] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.240369] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 2.240373] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 2.240382] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.240833] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved [ 2.240842] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 2.240914] system 00:02: [io 0x0200-0x020f] has been reserved [ 2.240919] system 00:02: [io 0x0400-0x040f] has been reserved [ 2.240923] system 00:02: [io 0x0680-0x069f] has been reserved [ 2.240928] system 00:02: [io 0x0800-0x080f] has been reserved [ 2.240932] system 00:02: [io 0x1000-0x107f] has been reserved [ 2.240936] system 00:02: [io 0x1180-0x11bf] has been reserved [ 2.240940] system 00:02: [io 0x1640-0x164f] has been reserved [ 2.240944] system 00:02: [io 0xfe00] has been reserved [ 2.240951] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.241026] system 00:03: [io 0x06a0-0x06af] has been reserved [ 2.241031] system 00:03: [io 0x06b0-0x06ff] has been reserved [ 2.241038] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.241079] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.241554] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.242221] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active) [ 2.242261] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 2.242293] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active) [ 2.242317] pnp: PnP ACPI: found 9 devices [ 2.249297] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 2.249350] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff] [ 2.249359] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 2.249365] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 2.249372] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff] [ 2.249378] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 2.249389] pci 0000:04:00.0: BAR 6: assigned [mem 0xf8020000-0xf803ffff pref] [ 2.249394] pci 0000:00:1c.1: PCI bridge to [bus 04-05] [ 2.249398] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 2.249406] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff] [ 2.249412] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 2.249421] pci 0000:00:1c.2: PCI bridge to [bus 06-07] [ 2.249426] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 2.249433] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff] [ 2.249440] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref] [ 2.249449] pci 0000:00:1e.0: PCI bridge to [bus 08] [ 2.249464] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 2.249465] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 2.249467] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 2.249469] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 2.249470] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 2.249472] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 2.249474] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff window] [ 2.249476] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 2.249477] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff] [ 2.249479] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref] [ 2.249480] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] [ 2.249482] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff] [ 2.249484] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref] [ 2.249485] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff] [ 2.249487] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff] [ 2.249489] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref] [ 2.249490] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7 window] [ 2.249492] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff window] [ 2.249494] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff window] [ 2.249495] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000d3fff window] [ 2.249497] pci_bus 0000:08: resource 8 [mem 0x000d4000-0x000d7fff window] [ 2.249499] pci_bus 0000:08: resource 9 [mem 0x000d8000-0x000dbfff window] [ 2.249500] pci_bus 0000:08: resource 10 [mem 0xc0000000-0xfebfffff window] [ 2.249620] NET: Registered protocol family 2 [ 2.249995] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 2.250167] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 2.250450] TCP: Hash tables configured (established 32768 bind 32768) [ 2.250531] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 2.250573] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 2.250659] NET: Registered protocol family 1 [ 2.250678] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.253019] PCI: CLS 64 bytes, default 64 [ 2.253073] Unpacking initramfs... [ 3.223580] Freeing initrd memory: 53440K [ 3.223716] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.223724] software IO TLB [mem 0xbb680000-0xbf680000] (64MB) mapped at [0000000032f5c437-00000000781f2952] [ 3.223915] Scanning for low memory corruption every 60 seconds [ 3.224752] Initialise system trusted keyrings [ 3.224769] Key type blacklist registered [ 3.224865] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 3.226641] zbud: loaded [ 3.227219] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.227409] fuse init (API version 7.26) [ 3.229186] Key type asymmetric registered [ 3.229191] Asymmetric key parser 'x509' registered [ 3.229230] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 3.229272] io scheduler noop registered [ 3.229276] io scheduler deadline registered [ 3.229338] io scheduler cfq registered (default) [ 3.229472] pcieport 0000:00:1c.0: enabling device (0000 -> 0003) [ 3.230131] pcieport 0000:00:1c.2: enabling device (0000 -> 0003) [ 3.230499] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 3.230503] vesafb: scrolling: redraw [ 3.230507] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 3.230525] vesafb: framebuffer at 0xd0000000, mapped to 0x000000001e9103e4, using 3072k, total 3072k [ 3.254717] Console: switching to colour frame buffer device 128x48 [ 3.278858] fb0: VESA VGA frame buffer device [ 3.279072] intel_idle: does not run on family 6 model 23 [ 3.284101] ACPI: AC Adapter [ADP1] (on-line) [ 3.284374] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 3.284770] ACPI: Lid Switch [LID0] [ 3.284975] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 3.285361] ACPI: Sleep Button [SLPB] [ 3.285572] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 3.285957] ACPI: Power Button [PWRB] [ 3.286178] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 3.286527] ACPI: Power Button [PWRF] [ 3.287085] Monitor-Mwait will be used to enter C-1 state [ 3.287089] Monitor-Mwait will be used to enter C-2 state [ 3.287091] tsc: Marking TSC unstable due to TSC halts in idle [ 3.289274] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 3.289877] thermal LNXTHERM:00: registered as thermal_zone0 [ 3.290133] ACPI: Thermal Zone [TZ00] (27 C) [ 3.290632] ACPI: Invalid active1 threshold [ 3.291012] thermal LNXTHERM:01: registered as thermal_zone1 [ 3.291268] ACPI: Thermal Zone [TZ01] (43 C) [ 3.291621] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 3.312807] 00:05: ttyS0 at I/O 0x3f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.416585] Linux agpgart interface v0.103 [ 3.419059] loop: module loaded [ 3.419440] ata_piix 0000:00:1f.1: version 2.13 [ 3.420511] scsi host0: ata_piix [ 3.431389] scsi host1: ata_piix [ 3.441904] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14 [ 3.452448] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15 [ 3.462990] libphy: Fixed MDIO Bus: probed [ 3.473256] tun: Universal TUN/TAP device driver, 1.6 [ 3.483655] PPP generic driver version 2.4.2 [ 3.494005] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.504391] ehci-pci: EHCI PCI platform driver [ 3.504500] ACPI: Battery Slot [BAT0] (battery present) [ 3.514770] ACPI: Battery Slot [BAT1] (battery absent) [ 3.535422] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 3.545668] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 3.555943] ehci-pci 0000:00:1a.7: debug port 1 [ 3.569881] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 3.569893] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfc406000 [ 3.592026] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 3.602185] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.612486] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.622769] usb usb1: Product: EHCI Host Controller [ 3.633225] usb usb1: Manufacturer: Linux 4.15.0-14-generic ehci_hcd [ 3.643718] usb usb1: SerialNumber: 0000:00:1a.7 [ 3.654239] hub 1-0:1.0: USB hub found [ 3.664589] hub 1-0:1.0: 4 ports detected [ 3.675128] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 3.685268] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 3.695409] ehci-pci 0000:00:1d.7: debug port 1 [ 3.709284] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 3.709294] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfc406400 [ 3.732021] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.741827] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.751570] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.761192] usb usb2: Product: EHCI Host Controller [ 3.770621] usb usb2: Manufacturer: Linux 4.15.0-14-generic ehci_hcd [ 3.779991] usb usb2: SerialNumber: 0000:00:1d.7 [ 3.789283] hub 2-0:1.0: USB hub found [ 3.798296] hub 2-0:1.0: 6 ports detected [ 3.807319] ehci-platform: EHCI generic platform driver [ 3.816205] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.824897] ohci-pci: OHCI PCI platform driver [ 3.833279] ohci-platform: OHCI generic platform driver [ 3.841592] uhci_hcd: USB Universal Host Controller Interface driver [ 3.850124] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.858540] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 3.867050] uhci_hcd 0000:00:1a.0: detected 2 ports [ 3.875427] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840 [ 3.883773] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.892353] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.900640] usb usb3: Product: UHCI Host Controller [ 3.908921] usb usb3: Manufacturer: Linux 4.15.0-14-generic uhci_hcd [ 3.917369] usb usb3: SerialNumber: 0000:00:1a.0 [ 3.926001] hub 3-0:1.0: USB hub found [ 3.934423] hub 3-0:1.0: 2 ports detected [ 3.943168] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.951634] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 3.960204] uhci_hcd 0000:00:1a.1: detected 2 ports [ 3.968665] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001860 [ 3.977073] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.985527] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.994020] usb usb4: Product: UHCI Host Controller [ 4.002558] usb usb4: Manufacturer: Linux 4.15.0-14-generic uhci_hcd [ 4.011173] usb usb4: SerialNumber: 0000:00:1a.1 [ 4.012043] usb 1-2: new high-speed USB device number 2 using ehci-pci [ 4.028642] hub 4-0:1.0: USB hub found [ 4.037350] hub 4-0:1.0: 2 ports detected [ 4.046276] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.054902] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 4.063610] uhci_hcd 0000:00:1d.0: detected 2 ports [ 4.072194] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 4.080777] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.089413] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.098106] usb usb5: Product: UHCI Host Controller [ 4.106825] usb usb5: Manufacturer: Linux 4.15.0-14-generic uhci_hcd [ 4.115625] usb usb5: SerialNumber: 0000:00:1d.0 [ 4.124483] hub 5-0:1.0: USB hub found [ 4.133179] hub 5-0:1.0: 2 ports detected [ 4.140037] usb 2-5: new high-speed USB device number 2 using ehci-pci [ 4.151162] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.160017] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 4.168985] uhci_hcd 0000:00:1d.1: detected 2 ports [ 4.173638] usb 1-2: New USB device found, idVendor=05e3, idProduct=0715 [ 4.173640] usb 1-2: New USB device strings: Mfr=3, Product=4, SerialNumber=2 [ 4.173641] usb 1-2: Product: USB Storage [ 4.173643] usb 1-2: Manufacturer: Generic [ 4.173644] usb 1-2: SerialNumber: 000000009412 [ 4.221993] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0 [ 4.230759] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f2432809b, max_idle_ns: 440795285692 ns [ 4.239962] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.249208] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.258449] usb usb6: Product: UHCI Host Controller [ 4.267604] usb usb6: Manufacturer: Linux 4.15.0-14-generic uhci_hcd [ 4.276931] usb usb6: SerialNumber: 0000:00:1d.1 [ 4.286304] hub 6-0:1.0: USB hub found [ 4.295507] hub 6-0:1.0: 2 ports detected [ 4.300035] usb 1-3: new high-speed USB device number 3 using ehci-pci [ 4.314139] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.323349] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 4.332648] uhci_hcd 0000:00:1d.2: detected 2 ports [ 4.341853] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 4.351102] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.360443] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.360469] usb 2-5: New USB device found, idVendor=0af0, idProduct=7601 [ 4.360471] usb 2-5: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 4.360472] usb 2-5: Product: Globetrotter HSUPA Modem [ 4.360474] usb 2-5: Manufacturer: Option N.V. [ 4.407222] usb usb7: Product: UHCI Host Controller [ 4.416443] usb usb7: Manufacturer: Linux 4.15.0-14-generic uhci_hcd [ 4.425688] usb usb7: SerialNumber: 0000:00:1d.2 [ 4.434900] hub 7-0:1.0: USB hub found [ 4.443965] hub 7-0:1.0: 2 ports detected [ 4.453090] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 4.467823] i8042: Detected active multiplexing controller, rev 1.1 [ 4.479375] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.488741] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 4.498098] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 4.507237] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 4.516266] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 4.525347] mousedev: PS/2 mouse device common for all mice [ 4.534596] rtc_cmos 00:04: RTC can wake from S4 [ 4.543565] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 4.552463] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 4.561453] i2c /dev entries driver [ 4.570600] device-mapper: uevent: version 1.0.3 [ 4.579694] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 4.588955] ledtrig-cpu: registered to indicate activity on CPUs [ 4.598157] usb 1-3: New USB device found, idVendor=05c8, idProduct=0103 [ 4.607428] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 4.607836] NET: Registered protocol family 10 [ 4.612655] Segment Routing with IPv6 [ 4.612676] NET: Registered protocol family 17 [ 4.612723] Key type dns_resolver registered [ 4.653400] usb 1-3: Product: FO13FF-65-1 PC-CAM [ 4.662551] usb 1-3: Manufacturer: Foxlink [ 4.671605] usb 1-3: SerialNumber: 1.09 [ 4.680563] RAS: Correctable Errors collector initialized. [ 4.683349] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 4.698378] microcode: sig=0x10676, pf=0x80, revision=0x607 [ 4.707358] microcode: Microcode Update Driver: v2.2. [ 4.707612] registered taskstats version 1 [ 4.725335] Loading compiled-in X.509 certificates [ 4.737398] Loaded X.509 cert 'Build time autogenerated kernel key: 48b4c19ffdaf3b7487ceb926ccbb1e6223865157' [ 4.746806] zswap: loaded using pool lzo/zbud [ 4.760174] Key type big_key registered [ 4.769349] Key type trusted registered [ 4.780438] Key type encrypted registered [ 4.789422] AppArmor: AppArmor sha1 policy hashing enabled [ 4.798524] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 4.807658] evm: HMAC attrs: 0x1 [ 4.816958] Magic number: 10:254:122 [ 4.825943] acpi LNXSYBUS:00: hash matches [ 4.835100] rtc_cmos 00:04: setting system clock to 2018-03-30 09:08:42 UTC (1522400922) [ 4.844841] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 4.854031] EDD information not available. [ 4.867329] Freeing unused kernel memory: 2400K [ 4.876461] Write protecting the kernel read-only data: 20480k [ 4.886836] Freeing unused kernel memory: 2008K [ 4.901545] Freeing unused kernel memory: 1904K [ 4.920078] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.929234] x86/mm: Checking user space page tables [ 4.947389] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 5.150968] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 5.168225] acpi device:05: registered as cooling_device3 [ 5.178860] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input9 [ 5.200710] sky2: driver version 1.30 [ 5.218415] ahci 0000:00:1f.2: version 3.0 [ 5.218783] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 5.228954] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part [ 5.239130] usb-storage 1-2:1.0: USB Mass Storage device detected [ 5.249958] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3 [ 5.261008] scsi host2: usb-storage 1-2:1.0 [ 5.261059] sky2 0000:04:00.0 eth0: addr 00:a0:d1:cd:97:e5 [ 5.281200] usbcore: registered new interface driver usb-storage [ 5.291289] scsi host3: ahci [ 5.324023] usbcore: registered new interface driver uas [ 5.341989] sky2 0000:04:00.0 enp4s0: renamed from eth0 [ 5.352397] scsi host4: ahci [ 5.362445] scsi host5: ahci [ 5.372165] ata3: SATA max UDMA/133 abar m2048@0xfc405000 port 0xfc405100 irq 24 [ 5.382140] ata4: SATA max UDMA/133 abar m2048@0xfc405000 port 0xfc405180 irq 24 [ 5.392033] ata5: SATA max UDMA/133 abar m2048@0xfc405000 port 0xfc405200 irq 24 [ 5.402856] pci 0000:00:00.0: Intel 965GM Chipset [ 5.412698] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 5.423969] pci 0000:00:00.0: detected 8192K stolen memory [ 5.433638] [drm] Memory usable by graphics device = 512M [ 5.443241] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 5.443243] fb: switching to inteldrmfb from VESA VGA [ 5.452973] Console: switching to colour dummy device 80x25 [ 5.453161] [drm] Replacing VGA console driver [ 5.453224] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.453228] [drm] Driver supports precise vblank timestamp query. [ 5.453240] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window] [ 5.453250] caller pci_map_rom+0x5d/0xf0 mapping multiple BARs [ 5.454103] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 5.577871] [drm] forcing SVIDEO-1 connector off [ 5.587973] [drm] RC6 disabled, disabling runtime PM support [ 5.587984] [drm] initialized overlay support [ 5.588329] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0 [ 5.624178] fbcon: inteldrmfb (fb0) is primary device [ 5.718405] ata4: SATA link down (SStatus 0 SControl 300) [ 5.718429] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.718447] ata5: SATA link down (SStatus 0 SControl 300) [ 5.718997] ata3.00: unexpected _GTF length (8) [ 5.771893] ata3.00: ATA-8: WDC WD1200BEVS-22UST0, 01.01A01, max UDMA/133 [ 5.771895] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 5.772686] ata3.00: unexpected _GTF length (8) [ 5.772903] ata3.00: configured for UDMA/133 [ 5.773136] scsi 3:0:0:0: Direct-Access ATA WDC WD1200BEVS-2 1A01 PQ: 0 ANSI: 5 [ 5.773404] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 5.773532] sd 3:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 5.773546] sd 3:0:0:0: [sda] Write Protect is off [ 5.773547] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.773571] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.814100] sda: sda1 sda2 < sda5 sda6 sda7 > [ 5.814609] sd 3:0:0:0: [sda] Attached SCSI disk [ 6.046500] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04753/0x200000/0x0/0x0, board id: 0, fw id: 189075 [ 6.080584] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13 [ 6.306635] scsi 2:0:0:0: Direct-Access Generic STORAGE DEVICE 9412 PQ: 0 ANSI: 0 [ 6.307049] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 6.308267] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 6.329794] Console: switching to colour frame buffer device 160x50 [ 6.349828] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 7.316039] raid6: sse2x1 gen() 4349 MB/s [ 7.364034] raid6: sse2x1 xor() 4390 MB/s [ 7.412029] raid6: sse2x2 gen() 4734 MB/s [ 7.460028] raid6: sse2x2 xor() 5335 MB/s [ 7.508035] raid6: sse2x4 gen() 7609 MB/s [ 7.556030] raid6: sse2x4 xor() 5896 MB/s [ 7.557392] raid6: using algorithm sse2x4 gen() 7609 MB/s [ 7.558754] raid6: .... xor() 5896 MB/s, rmw enabled [ 7.560145] raid6: using ssse3x2 recovery algorithm [ 7.562818] xor: measuring software checksum speed [ 7.604009] prefetch64-sse: 10550.000 MB/sec [ 7.644008] generic_sse: 9351.000 MB/sec [ 7.645373] xor: using function: prefetch64-sse (10550.000 MB/sec) [ 7.648300] async_tx: api initialized (async) [ 7.709520] Btrfs loaded, crc32c=crc32c-generic [ 9.671585] random: crng init done [ 17.629516] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 19.574316] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.715545] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 19.736126] systemd[1]: Detected architecture x86-64. [ 19.809336] systemd[1]: Set hostname to . [ 22.173788] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 22.178565] systemd[1]: Created slice User and Session Slice. [ 22.182216] systemd[1]: Reached target User and Group Name Lookups. [ 22.186124] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 22.190031] systemd[1]: Created slice System Slice. [ 22.193651] systemd[1]: Listening on udev Control Socket. [ 22.197370] systemd[1]: Listening on Journal Audit Socket. [ 23.244087] Loading iSCSI transport class v2.0-870. [ 23.293564] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 23.370150] iscsi: registered transport (tcp) [ 23.429024] iscsi: registered transport (iser) [ 23.771342] systemd-journald[389]: Received request to flush runtime journal from PID 1 [ 26.227703] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 26.635886] parport_pc 00:06: reported by Plug and Play ACPI [ 26.635952] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE] [ 27.544442] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 27.547256] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 27.601256] media: Linux media interface: v0.10 [ 27.628393] Linux video capture interface: v2.00 [ 27.919631] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 27.919635] cfg80211: failed to load regulatory.db [ 28.077513] hso: /home/khfeng/Sources/linux-lp1758507-sky2-d3/drivers/net/usb/hso.c: Option Wireless [ 28.104026] usbcore: registered new interface driver hso [ 28.191487] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\PMIO) (20170831/utaddress-247) [ 28.191495] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 28.191498] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20170831/utaddress-247) [ 28.191502] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 28.191503] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20170831/utaddress-247) [ 28.191508] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 28.191508] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 28.466626] atkbd serio0: Unknown key pressed (translated set 2, code 0x83 on isa0060/serio0). [ 28.466629] atkbd serio0: Use 'setkeycodes e003 ' to make it known. [ 28.535957] snd_hda_intel 0000:00:1b.0: enabling device (0104 -> 0106) [ 28.756912] sky2 0000:04:00.0 enp4s0: enabling interface [ 28.758270] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready [ 28.856823] snd_hda_codec_realtek hdaudioC0D0: ALC262: SKU not ready 0x598301f0 [ 28.857232] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line [ 28.857234] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 28.857236] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 28.857238] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 28.857239] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 28.857241] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19 [ 28.857243] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x1a [ 28.857245] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 28.865401] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 28.865473] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 28.865536] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 28.865597] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 29.072380] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree: [ 29.072381] iwl4965: Copyright(c) 2003-2011 Intel Corporation [ 29.072462] iwl4965 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control [ 29.072472] iwl4965 0000:06:00.0: enabling device (0104 -> 0106) [ 29.072608] iwl4965 0000:06:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 [ 29.110112] iwl4965 0000:06:00.0: device EEPROM VER=0x36, CALIB=0x5 [ 29.110637] iwl4965 0000:06:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 29.298357] iwl4965 0000:06:00.0: loaded firmware version 228.61.2.24 [ 29.327398] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs' [ 29.698801] uvcvideo: Found UVC 1.00 device FO13FF-65-1 PC-CAM (05c8:0103) [ 29.702312] uvcvideo 1-3:1.0: Entity type for entity Extension 5 was not initialized! [ 29.702314] uvcvideo 1-3:1.0: Entity type for entity Extension 4 was not initialized! [ 29.702316] uvcvideo 1-3:1.0: Entity type for entity Processing 3 was not initialized! [ 29.702318] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized! [ 29.702399] input: FO13FF-65-1 PC-CAM: FO13FF-65-1 as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input18 [ 29.702469] usbcore: registered new interface driver uvcvideo [ 29.702470] USB Video Class driver (1.1.1) [ 30.084764] intel_powerclamp: No package C-state available [ 30.132300] intel_powerclamp: No package C-state available [ 31.741470] sky2 0000:04:00.0 enp4s0: Link is up at 1000 Mbps, full duplex, flow control both [ 31.741487] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready [ 32.639879] ppdev: user-space parallel port driver [ 34.416412] iwl4965 0000:06:00.0 wlp6s0: renamed from wlan0 [ 35.007627] audit: type=1400 audit(1522400952.668:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=658 comm="apparmor_parser" [ 35.009221] audit: type=1400 audit(1522400952.672:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=658 comm="apparmor_parser" [ 35.009820] audit: type=1400 audit(1522400952.672:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=658 comm="apparmor_parser" [ 35.010390] audit: type=1400 audit(1522400952.672:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=658 comm="apparmor_parser" [ 35.025551] audit: type=1400 audit(1522400952.688:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=677 comm="apparmor_parser" [ 35.141355] audit: type=1400 audit(1522400952.804:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=642 comm="apparmor_parser" [ 35.142187] audit: type=1400 audit(1522400952.804:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=642 comm="apparmor_parser" [ 35.142874] audit: type=1400 audit(1522400952.804:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=642 comm="apparmor_parser" [ 35.143602] audit: type=1400 audit(1522400952.804:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=642 comm="apparmor_parser" [ 35.150483] audit: type=1400 audit(1522400952.812:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=679 comm="apparmor_parser" [ 35.522276] Adding 4182012k swap on /dev/sda7. Priority:-2 extents:1 across:4182012k FS [ 35.780574] new mount options do not match the existing superblock, will be ignored [ 71.380235] PM: suspend entry (deep) [ 71.380238] PM: Syncing filesystems ... done. [ 71.800610] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 71.801805] OOM killer disabled. [ 71.801806] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 71.802919] Suspending console(s) (use no_console_suspend to debug) [ 71.824074] sd 3:0:0:0: [sda] Synchronizing SCSI cache [ 71.833205] sd 3:0:0:0: [sda] Stopping disk [ 71.845625] parport_pc 00:06: disabled [ 71.845946] serial 00:05: disabled [ 72.769454] ACPI: Preparing to enter system sleep state S3 [ 72.769648] ACPI: EC: event blocked [ 72.769649] ACPI: EC: EC stopped [ 72.769649] PM: Saving platform NVS memory [ 72.769740] Disabling non-boot CPUs ... [ 72.784352] IRQ 25: no longer affine to CPU1 [ 72.785370] smpboot: CPU 1 is now offline [ 72.785407] ACPI: Low-level resume complete [ 72.785407] ACPI: EC: EC started [ 72.785407] PM: Restoring platform NVS memory [ 72.785407] Force enabled HPET at resume [ 72.785407] Enabling non-boot CPUs ... [ 72.785407] x86: Booting SMP configuration: [ 72.785407] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 72.788068] cache: parent cpu1 should not be sleeping [ 72.788363] CPU1 is up [ 72.791398] ACPI: Waking up from system sleep state S3 [ 73.312795] usb usb3: root hub lost power or was reset [ 73.313016] usb usb4: root hub lost power or was reset [ 73.313233] usb usb5: root hub lost power or was reset [ 73.313301] usb usb6: root hub lost power or was reset [ 73.313366] usb usb7: root hub lost power or was reset [ 73.316399] iwl4965 0000:06:00.0: RF_KILL bit toggled to disable radio. [ 73.317772] sd 3:0:0:0: [sda] Starting disk [ 73.344155] ACPI: button: The lid device is not compliant to SW_LID. [ 73.344180] ACPI: EC: event unblocked [ 73.345249] serial 00:05: activated [ 73.346464] parport_pc 00:06: activated [ 73.560041] usb 1-2: reset high-speed USB device number 2 using ehci-pci [ 73.631214] ata5: SATA link down (SStatus 0 SControl 300) [ 73.631231] ata4: SATA link down (SStatus 0 SControl 300) [ 73.844069] usb 1-3: reset high-speed USB device number 3 using ehci-pci [ 74.348066] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 74.349457] ata3.00: unexpected _GTF length (8) [ 74.364558] ata3.00: unexpected _GTF length (8) [ 74.364802] ata3.00: configured for UDMA/133 [ 76.142771] sky2 0000:04:00.0 enp4s0: Link is up at 1000 Mbps, full duplex, flow control both [ 76.260102] usb 2-5: reset high-speed USB device number 2 using ehci-pci [ 76.426299] OOM killer enabled. [ 76.426299] Restarting tasks ... done. [ 76.944739] video LNXVIDEO:00: Restoring backlight state [ 76.944842] PM: suspend exit [ 92.932086] PM: suspend entry (deep) [ 92.932089] PM: Syncing filesystems ... done. [ 93.115287] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 93.116102] OOM killer disabled. [ 93.116103] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 93.117291] Suspending console(s) (use no_console_suspend to debug) [ 93.132102] sd 3:0:0:0: [sda] Synchronizing SCSI cache [ 93.160651] parport_pc 00:06: disabled [ 93.161036] serial 00:05: disabled [ 93.166164] sd 3:0:0:0: [sda] Stopping disk [ 94.112998] ACPI: Preparing to enter system sleep state S3 [ 94.113216] ACPI: EC: event blocked [ 94.113217] ACPI: EC: EC stopped [ 94.113218] PM: Saving platform NVS memory [ 94.113314] Disabling non-boot CPUs ... [ 94.128405] IRQ 24: no longer affine to CPU1 [ 94.129414] smpboot: CPU 1 is now offline [ 94.129591] ACPI: Low-level resume complete [ 94.129591] ACPI: EC: EC started [ 94.129591] PM: Restoring platform NVS memory [ 94.129591] Force enabled HPET at resume [ 94.129591] Enabling non-boot CPUs ... [ 94.129591] x86: Booting SMP configuration: [ 94.129591] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 94.131675] cache: parent cpu1 should not be sleeping [ 94.131971] CPU1 is up [ 94.135033] ACPI: Waking up from system sleep state S3 [ 94.664183] usb usb3: root hub lost power or was reset [ 94.664268] usb usb4: root hub lost power or was reset [ 94.664498] usb usb5: root hub lost power or was reset [ 94.664565] usb usb6: root hub lost power or was reset [ 94.664628] usb usb7: root hub lost power or was reset [ 94.667642] iwl4965 0000:06:00.0: RF_KILL bit toggled to disable radio. [ 94.668793] sd 3:0:0:0: [sda] Starting disk [ 94.688101] ACPI: EC: event unblocked [ 94.689158] serial 00:05: activated [ 94.690304] parport_pc 00:06: activated [ 94.912050] usb 1-2: reset high-speed USB device number 2 using ehci-pci [ 94.983008] ata4: SATA link down (SStatus 0 SControl 300) [ 94.983026] ata5: SATA link down (SStatus 0 SControl 300) [ 95.196051] usb 1-3: reset high-speed USB device number 3 using ehci-pci [ 95.700075] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 95.700832] ata3.00: unexpected _GTF length (8) [ 95.714288] ata3.00: unexpected _GTF length (8) [ 95.714524] ata3.00: configured for UDMA/133 [ 97.488671] sky2 0000:04:00.0 enp4s0: Link is up at 1000 Mbps, full duplex, flow control both [ 97.576081] usb 2-5: reset high-speed USB device number 2 using ehci-pci [ 97.742188] OOM killer enabled. [ 97.742189] Restarting tasks ... done. [ 98.288790] video LNXVIDEO:00: Restoring backlight state [ 98.288893] PM: suspend exit [ 112.484224] PM: suspend entry (deep) [ 112.484228] PM: Syncing filesystems ... done. [ 112.735978] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 112.737360] OOM killer disabled. [ 112.737361] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 112.738552] Suspending console(s) (use no_console_suspend to debug) [ 112.756124] sd 3:0:0:0: [sda] Synchronizing SCSI cache [ 112.781498] parport_pc 00:06: disabled [ 112.781957] serial 00:05: disabled [ 112.785544] sd 3:0:0:0: [sda] Stopping disk [ 113.729158] ACPI: Preparing to enter system sleep state S3 [ 113.729416] ACPI: EC: event blocked [ 113.729417] ACPI: EC: EC stopped [ 113.729418] PM: Saving platform NVS memory [ 113.729521] Disabling non-boot CPUs ... [ 113.744409] IRQ fixup: irq 25 move in progress, old vector 47 [ 113.744416] IRQ 25: no longer affine to CPU1 [ 113.745437] smpboot: CPU 1 is now offline [ 113.745650] ACPI: Low-level resume complete [ 113.745650] ACPI: EC: EC started [ 113.745650] PM: Restoring platform NVS memory [ 113.745650] Force enabled HPET at resume [ 113.745650] Enabling non-boot CPUs ... [ 113.745650] x86: Booting SMP configuration: [ 113.745650] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 113.747672] cache: parent cpu1 should not be sleeping [ 113.747963] CPU1 is up [ 113.751023] ACPI: Waking up from system sleep state S3 [ 114.280162] usb usb3: root hub lost power or was reset [ 114.280363] usb usb4: root hub lost power or was reset [ 114.280595] usb usb5: root hub lost power or was reset [ 114.280662] usb usb6: root hub lost power or was reset [ 114.280726] usb usb7: root hub lost power or was reset [ 114.283737] iwl4965 0000:06:00.0: RF_KILL bit toggled to disable radio. [ 114.284887] sd 3:0:0:0: [sda] Starting disk [ 114.304073] ACPI: EC: event unblocked [ 114.305055] serial 00:05: activated [ 114.306208] parport_pc 00:06: activated [ 114.528037] usb 1-2: reset high-speed USB device number 2 using ehci-pci [ 114.598997] ata4: SATA link down (SStatus 0 SControl 300) [ 114.599018] ata5: SATA link down (SStatus 0 SControl 300) [ 114.812037] usb 1-3: reset high-speed USB device number 3 using ehci-pci [ 115.256079] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 115.287358] ata3.00: unexpected _GTF length (8) [ 115.302001] ata3.00: unexpected _GTF length (8) [ 115.302261] ata3.00: configured for UDMA/133 [ 117.094906] sky2 0000:04:00.0 enp4s0: Link is up at 1000 Mbps, full duplex, flow control both [ 117.224064] usb 2-5: reset high-speed USB device number 2 using ehci-pci [ 117.391279] OOM killer enabled. [ 117.391280] Restarting tasks ... done. [ 117.976716] video LNXVIDEO:00: Restoring backlight state [ 117.976817] PM: suspend exit [ 155.679673] atkbd serio0: Unknown key pressed (translated set 2, code 0x83 on isa0060/serio0). [ 155.679681] atkbd serio0: Use 'setkeycodes e003 ' to make it known. [ 155.770129] atkbd serio0: Unknown key released (translated set 2, code 0x83 on isa0060/serio0). [ 155.770136] atkbd serio0: Use 'setkeycodes e003 ' to make it known. [ 155.825041] usb 1-3: USB disconnect, device number 3 [ 194.038545] PM: suspend entry (deep) [ 194.038549] PM: Syncing filesystems ... done. [ 194.257602] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 194.258908] OOM killer disabled. [ 194.258908] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 194.260080] Suspending console(s) (use no_console_suspend to debug) [ 194.280159] sd 3:0:0:0: [sda] Synchronizing SCSI cache [ 194.302799] sd 3:0:0:0: [sda] Stopping disk [ 194.303335] parport_pc 00:06: disabled [ 194.303648] serial 00:05: disabled [ 195.232835] ACPI: Preparing to enter system sleep state S3 [ 195.233025] ACPI: EC: event blocked [ 195.233026] ACPI: EC: EC stopped [ 195.233027] PM: Saving platform NVS memory [ 195.233116] Disabling non-boot CPUs ... [ 195.248313] IRQ 25: no longer affine to CPU1 [ 195.249327] smpboot: CPU 1 is now offline [ 195.249506] ACPI: Low-level resume complete [ 195.249506] ACPI: EC: EC started [ 195.249506] PM: Restoring platform NVS memory [ 195.249506] Force enabled HPET at resume [ 195.249506] Enabling non-boot CPUs ... [ 195.249506] x86: Booting SMP configuration: [ 195.249506] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 195.251453] cache: parent cpu1 should not be sleeping [ 195.251746] CPU1 is up [ 195.254802] ACPI: Waking up from system sleep state S3 [ 195.784181] usb usb3: root hub lost power or was reset [ 195.784263] usb usb4: root hub lost power or was reset [ 195.784494] usb usb5: root hub lost power or was reset [ 195.784560] usb usb6: root hub lost power or was reset [ 195.784623] usb usb7: root hub lost power or was reset [ 195.787642] iwl4965 0000:06:00.0: RF_KILL bit toggled to disable radio. [ 195.788135] sd 3:0:0:0: [sda] Starting disk [ 195.808110] ACPI: EC: event unblocked [ 195.809169] serial 00:05: activated [ 195.810355] parport_pc 00:06: activated [ 196.032044] usb 1-2: reset high-speed USB device number 2 using ehci-pci [ 196.103039] ata5: SATA link down (SStatus 0 SControl 300) [ 196.103055] ata4: SATA link down (SStatus 0 SControl 300) [ 196.764054] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 196.790483] ata3.00: unexpected _GTF length (8) [ 196.804584] ata3.00: unexpected _GTF length (8) [ 196.804829] ata3.00: configured for UDMA/133 [ 198.626624] sky2 0000:04:00.0 enp4s0: Link is up at 1000 Mbps, full duplex, flow control both [ 198.700090] usb 2-5: reset high-speed USB device number 2 using ehci-pci [ 198.867346] OOM killer enabled. [ 198.867347] Restarting tasks ... done. [ 199.396677] video LNXVIDEO:00: Restoring backlight state [ 199.396780] PM: suspend exit