[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-77-generic (buildd@lgw01-09) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #99~14.04.1-Ubuntu SMP Tue Jun 28 19:17:10 UTC 2016 (Ubuntu 3.16.0-77.99~14.04.1-generic 3.16.7-ckt27)
[    0.000000] Command line: root=LABEL=cloudimg-rootfs ds=nocloud-net;seedfrom=http://10.245.168.20:43593/ console=ttyS0 
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd9fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003ffda000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] Hypervisor detected: KVM
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x3ffda max_arch_pfn = 0x400000000
[    0.000000] PAT not supported by CPU.
[    0.000000] found SMP MP-table at [mem 0x000f6a80-0x000f6a8f] mapped at [ffff8800000f6a80]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000] init_memory_mapping: [mem 0x3e200000-0x3e3fffff]
[    0.000000] init_memory_mapping: [mem 0x3c000000-0x3e1fffff]
[    0.000000] init_memory_mapping: [mem 0x00100000-0x3bffffff]
[    0.000000] init_memory_mapping: [mem 0x3e400000-0x3ffd9fff]
[    0.000000] RAMDISK: [mem 0x3e548000-0x3ffcffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F68A0 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000003FFE1737 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000003FFE1613 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000003FFE0040 0015D3 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000003FFE0000 000040
[    0.000000] ACPI: APIC 0x000000003FFE1687 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000003FFE16FF 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000003ffd9fff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x3ffd9fff]
[    0.000000]   NODE_DATA [mem 0x3ffd5000-0x3ffd9fff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:3ffd1001, primary cpu clock
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x3ffd9fff]
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88003e200000 s81408 r8192 d20992 u2097152
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 3e20d000
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 257891
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=LABEL=cloudimg-rootfs ds=nocloud-net;seedfrom=http://10.245.168.20:43593/ console=ttyS0 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Memory: 987852K/1048032K available (7658K kernel code, 1133K rwdata, 3620K rodata, 1356K init, 1300K bss, 60180K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:16640 nr_irqs:256 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] tsc: Detected 2397.222 MHz processor
[    0.008000] Calibrating delay loop (skipped) preset value.. 4794.44 BogoMIPS (lpj=9588888)
[    0.008000] pid_max: default: 32768 minimum: 301
[    0.008000] ACPI: Core revision 20140424
[    0.008000] ACPI: All ACPI Tables successfully acquired
[    0.008000] Security Framework initialized
[    0.008000] AppArmor: AppArmor initialized
[    0.008000] Yama: becoming mindful.
[    0.008044] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.008775] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.009585] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.010111] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.010800] Initializing cgroup subsys memory
[    0.011168] Initializing cgroup subsys devices
[    0.011524] Initializing cgroup subsys freezer
[    0.011876] Initializing cgroup subsys net_cls
[    0.012007] Initializing cgroup subsys blkio
[    0.012348] Initializing cgroup subsys perf_event
[    0.012750] Initializing cgroup subsys net_prio
[    0.013128] Initializing cgroup subsys hugetlb
[    0.013528] mce: CPU supports 10 MCE banks
[    0.013878] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.013878] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.013878] tlb_flushall_shift: 6
[    0.024856] Freeing SMP alternatives memory: 32K (ffffffff81e70000 - ffffffff81e78000)
[    0.028117] ftrace: allocating 29318 entries in 115 pages
[    0.040165] Enabling x2apic
[    0.040424] Enabled x2apic
[    0.040812] Switched APIC routing to physical x2apic.
[    0.041992] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.042456] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (fam: 06, model: 06, stepping: 03)
[    0.044000] Performance Events: Broken PMU hardware detected, using software events only.
[    0.044508] Failed to access perfctr msr (MSR c1 is 0)
[    0.048501] x86: Booted up 1 node, 1 CPUs
[    0.048932] smpboot: Total of 1 processors activated (4794.44 BogoMIPS)
[    0.049795] NMI watchdog: disabled (cpu0): hardware events not enabled
[    0.050460] devtmpfs: initialized
[    0.052927] evm: security.selinux
[    0.053250] evm: security.SMACK64
[    0.053562] evm: security.SMACK64EXEC
[    0.053904] evm: security.SMACK64TRANSMUTE
[    0.054286] evm: security.SMACK64MMAP
[    0.054629] evm: security.ima
[    0.054909] evm: security.capability
[    0.056044] pinctrl core: initialized pinctrl subsystem
[    0.056602] regulator-dummy: no parameters
[    0.057359] RTC time: 21:09:51, date: 01/31/17
[    0.057825] NET: Registered protocol family 16
[    0.058374] cpuidle: using governor ladder
[    0.058765] cpuidle: using governor menu
[    0.059183] ACPI: bus type PCI registered
[    0.059562] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.060107] PCI: Using configuration type 1 for base access
[    0.061714] ACPI: Added _OSI(Module Device)
[    0.062121] ACPI: Added _OSI(Processor Device)
[    0.062536] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.062991] ACPI: Added _OSI(Processor Aggregator Device)
[    0.064516] ACPI: Interpreter enabled
[    0.065044] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.065918] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.066792] ACPI: (supports S0 S3 S4 S5)
[    0.067157] ACPI: Using IOAPIC for interrupt routing
[    0.067627] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.070179] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.070763] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.071396] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.072015] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.073312] acpiphp: Slot [3] registered
[    0.073694] acpiphp: Slot [4] registered
[    0.074075] acpiphp: Slot [5] registered
[    0.074454] acpiphp: Slot [6] registered
[    0.074849] acpiphp: Slot [7] registered
[    0.075228] acpiphp: Slot [8] registered
[    0.076019] acpiphp: Slot [9] registered
[    0.076399] acpiphp: Slot [10] registered
[    0.076814] acpiphp: Slot [11] registered
[    0.077202] acpiphp: Slot [12] registered
[    0.077589] acpiphp: Slot [13] registered
[    0.077976] acpiphp: Slot [14] registered
[    0.078362] acpiphp: Slot [15] registered
[    0.078748] acpiphp: Slot [16] registered
[    0.079134] acpiphp: Slot [17] registered
[    0.079520] acpiphp: Slot [18] registered
[    0.079906] acpiphp: Slot [19] registered
[    0.080017] acpiphp: Slot [20] registered
[    0.080404] acpiphp: Slot [21] registered
[    0.080978] acpiphp: Slot [22] registered
[    0.081366] acpiphp: Slot [23] registered
[    0.081894] acpiphp: Slot [24] registered
[    0.082283] acpiphp: Slot [25] registered
[    0.082672] acpiphp: Slot [26] registered
[    0.083059] acpiphp: Slot [27] registered
[    0.083445] acpiphp: Slot [28] registered
[    0.084019] acpiphp: Slot [29] registered
[    0.084409] acpiphp: Slot [30] registered
[    0.084828] acpiphp: Slot [31] registered
[    0.085209] PCI host bridge to bus 0000:00
[    0.085590] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.086097] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.086806] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.087375] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.088002] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
[    0.102218] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.102896] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.104003] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.105106] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.106254] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.106989] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.244717] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.245456] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.248217] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.249251] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.250165] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.250967] ACPI: Enabled 16 GPEs in block 00 to 0F
[    0.251618] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.252000] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.252003] vgaarb: loaded
[    0.252286] vgaarb: bridge control possible 0000:00:02.0
[    0.253051] SCSI subsystem initialized
[    0.253593] ACPI: bus type USB registered
[    0.254194] usbcore: registered new interface driver usbfs
[    0.256013] usbcore: registered new interface driver hub
[    0.256871] usbcore: registered new device driver usb
[    0.257696] PCI: Using ACPI for IRQ routing
[    0.258567] NetLabel: Initializing
[    0.259233] NetLabel:  domain hash size = 128
[    0.260002] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.260810] NetLabel:  unlabeled traffic allowed by default
[    0.261431] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.262100] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.262758] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.265092] Switched to clocksource kvm-clock
[    0.269792] AppArmor: AppArmor Filesystem Enabled
[    0.270282] pnp: PnP ACPI init
[    0.270588] ACPI: bus type PNP registered
[    0.271839] pnp: PnP ACPI: found 6 devices
[    0.272246] ACPI: bus type PNP unregistered
[    0.278524] NET: Registered protocol family 2
[    0.279103] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.280392] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    0.281012] TCP: Hash tables configured (established 8192 bind 8192)
[    0.281619] TCP: reno registered
[    0.281926] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.282476] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.283098] NET: Registered protocol family 1
[    0.283865] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.284592] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.285142] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.285976] Trying to unpack rootfs image as initramfs...
[    0.709854] Freeing initrd memory: 27168K (ffff88003e548000 - ffff88003ffd0000)
[    0.710724] microcode: CPU0 sig=0x663, pf=0x1, revision=0x1
[    0.711293] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.712143] Scanning for low memory corruption every 60 seconds
[    0.712901] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.713634] Initialise system trusted keyring
[    0.714067] audit: initializing netlink subsys (disabled)
[    0.714580] audit: type=2000 audit(1485896992.356:1): initialized
[    0.715545] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.717438] zpool: loaded
[    0.717695] zbud: loaded
[    0.718084] VFS: Disk quotas dquot_6.5.2
[    0.718487] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.719500] fuse init (API version 7.23)
[    0.719946] msgmni has been set to 1982
[    0.720370] Key type big_key registered
[    0.720898] Key type asymmetric registered
[    0.721288] Asymmetric key parser 'x509' registered
[    0.721773] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.722482] io scheduler noop registered
[    0.722854] io scheduler deadline registered (default)
[    0.723383] io scheduler cfq registered
[    0.723816] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.724358] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.725076] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.725770] ACPI: Power Button [PWRF]
[    0.726223] GHES: HEST is not enabled!
[    0.747566] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    0.768864] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[    0.790933] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    0.812970] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[    0.834885] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.858732] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.860596] Linux agpgart interface v0.103
[    0.861837] brd: module loaded
[    0.862555] loop: module loaded
[    0.863734]  vda: unknown partition table
[    0.864874]  vdb: unknown partition table
[    0.865989]  vdc: unknown partition table
[    0.867692] scsi0 : ata_piix
[    0.868075] scsi1 : ata_piix
[    0.868387] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14
[    0.869013] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15
[    0.870083] libphy: Fixed MDIO Bus: probed
[    0.870475] tun: Universal TUN/TAP device driver, 1.6
[    0.870941] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.872193] PPP generic driver version 2.4.2
[    0.872638] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.873248] ehci-pci: EHCI PCI platform driver
[    0.873672] ehci-platform: EHCI generic platform driver
[    0.874164] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.874737] ohci-pci: OHCI PCI platform driver
[    0.875357] ohci-platform: OHCI generic platform driver
[    0.875848] uhci_hcd: USB Universal Host Controller Interface driver
[    0.876678] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.878114] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.878582] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.879153] mousedev: PS/2 mouse device common for all mice
[    0.879912] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    0.880924] rtc_cmos 00:00: RTC can wake from S4
[    0.881916] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    0.882620] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs
[    0.883554] device-mapper: uevent: version 1.0.3
[    0.884056] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.884857] ledtrig-cpu: registered to indicate activity on CPUs
[    0.885496] TCP: cubic registered
[    0.885909] NET: Registered protocol family 10
[    0.886468] NET: Registered protocol family 17
[    0.886900] Key type dns_resolver registered
[    0.887655] Loading compiled-in X.509 certificates
[    0.888856] Loaded X.509 cert 'Magrathea: Glacier signing key: 4a94aff5eff7b539906b3f2a9d0cca00dac4cbb0'
[    0.889750] registered taskstats version 1
[    0.891324] Key type trusted registered
[    0.893730] Key type encrypted registered
[    0.894127] AppArmor: AppArmor sha1 policy hashing enabled
[    0.894635] ima: No TPM chip found, activating TPM-bypass!
[    0.895164] evm: HMAC attrs: 0x1
[    0.895710]   Magic number: 1:145:198
[    0.896331] rtc_cmos 00:00: setting system clock to 2017-01-31 21:09:52 UTC (1485896992)
[    0.897136] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.897694] EDD information not available.
[    1.032821] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.034271] ata2.00: configured for MWDMA2
[    1.036104] scsi 1:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.044546] sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.045288] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.046384] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    1.048472] Freeing unused kernel memory: 1356K (ffffffff81d1d000 - ffffffff81e70000)
[    1.049449] Write protecting the kernel read-only data: 12288k
[    1.050401] Freeing unused kernel memory: 524K (ffff88000177d000 - ffff880001800000)
[    1.052732] Freeing unused kernel memory: 476K (ffff880001b89000 - ffff880001c00000)
Loading, please wait...
[    1.068173] systemd-udevd[100]: starting version 204
[    1.085589] Floppy drive(s): fd0 is 2.88M AMI BIOS
[    1.099390] scsi2 : Virtio SCSI HBA
[    1.103529] FDC 0 is a S82078B
[    1.708200] tsc: Refined TSC clocksource calibration: 2397.211 MHz
[    2.144761] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
Begin: Loading essential drivers ... [    2.367612] md: linear personality registered for level -1
[    2.369946] md: multipath personality registered for level -4
[    2.372487] md: raid0 personality registered for level 0
[    2.375227] md: raid1 personality registered for level 1
[    2.444008] raid6: sse2x1    7430 MB/s
[    2.512012] raid6: sse2x2    9280 MB/s
[    2.580008] raid6: sse2x4   11672 MB/s
[    2.580310] raid6: using algorithm sse2x4 (11672 MB/s)
[    2.580704] raid6: using intx1 recovery algorithm
[    2.582077] xor: measuring software checksum speed
[    2.620009]    prefetch64-sse: 14421.000 MB/sec
[    2.660009]    generic_sse: 13725.000 MB/sec
[    2.660363] xor: using function: prefetch64-sse (14421.000 MB/sec)
[    2.661903] async_tx: api initialized (async)
[    2.667980] md: raid6 personality registered for level 6
[    2.668444] md: raid5 personality registered for level 5
[    2.668867] md: raid4 personality registered for level 4
[    2.672783] md: raid10 personality registered for level 10
done.

Begin: Running /scripts/init-premount ... done.

Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.

Begin: Running /scripts/local-premount ... done.

[    2.687123] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null)
Begin: Running /scripts/local-bottom ... done.

done.

Begin: Running /scripts/init-bottom ... done.

[    2.780710] random: init urandom read with 28 bits of entropy available
[    2.897942] EXT4-fs (vda): re-mounted. Opts: (null)
 * Starting Initialize or finalize resolvconf[74G[ OK ]

 * Starting Signal sysvinit that the rootfs is mounted[74G[ OK ]

 * Starting Clean /tmp directory[74G[ OK ]

 * Stopping Clean /tmp directory[74G[ OK ]

Cloud-init v. 0.7.5 running 'init-local' at Tue, 31 Jan 2017 21:09:54 +0000. Up 3.24 seconds.

cloud-init-nonet[3.76]: waiting 10 seconds for network device

 * Starting set console keymap[74G[ OK ]

 * Starting Signal sysvinit that virtual filesystems are mounted[74G[ OK ]

 * Starting Signal sysvinit that virtual filesystems are mounted[74G[ OK ]

 * Starting Bridge udev events into upstart[74G[ OK ]

 * Starting device node and kernel event manager[74G[ OK ]

 * Starting Signal sysvinit that remote filesystems are mounted[74G[ OK ]

 * Starting cold plug devices[74G[ OK ]

 * Starting log initial device creation[74G[ OK ]

 * Stopping set console keymap[74G[ OK ]

 * Starting configure network device used by iSCSI root[74G[ OK ]

 * Starting Uncomplicated firewall[74G[ OK ]

 * Starting configure network device security[74G[ OK ]

 * Starting configure network device security[74G[ OK ]

 * Starting Mount network filesystems[74G[ OK ]

 * Stopping Mount network filesystems[74G[ OK ]

 * Starting configure network device[74G[ OK ]

 * Starting Bridge socket events into upstart[74G[ OK ]

 * Starting Mount network filesystems[74G[ OK ]

 * Stopping Mount network filesystems[74G[ OK ]

cloud-init-nonet[4.94]: static networking is now up

 * Starting configure network device[74G[ OK ]

 * Stopping cold plug devices[74G[ OK ]

 * Stopping log initial device creation[74G[ OK ]

 * Starting enable remaining boot-time encrypted block devices[74G[ OK ]

Cloud-init v. 0.7.5 running 'init' at Tue, 31 Jan 2017 21:09:56 +0000. Up 5.30 seconds.

ci-info: +++++++++++++++++++++++++Net device info+++++++++++++++++++++++++

ci-info: +--------+------+-----------+---------------+-------------------+

ci-info: | Device |  Up  |  Address  |      Mask     |     Hw-Address    |

ci-info: +--------+------+-----------+---------------+-------------------+

ci-info: |   lo   | True | 127.0.0.1 |   255.0.0.0   |         .         |

ci-info: |  eth0  | True | 10.0.2.15 | 255.255.255.0 | 52:54:00:12:34:56 |

ci-info: +--------+------+-----------+---------------+-------------------+

ci-info: ++++++++++++++++++++++++++++++Route info++++++++++++++++++++++++++++++

ci-info: +-------+-------------+----------+---------------+-----------+-------+

ci-info: | Route | Destination | Gateway  |    Genmask    | Interface | Flags |

ci-info: +-------+-------------+----------+---------------+-----------+-------+

ci-info: |   0   |   0.0.0.0   | 10.0.2.2 |    0.0.0.0    |    eth0   |   UG  |

ci-info: |   1   |   10.0.2.0  | 0.0.0.0  | 255.255.255.0 |    eth0   |   U   |

ci-info: +-------+-------------+----------+---------------+-----------+-------+

Generating public/private rsa key pair.

Your identification has been saved in /etc/ssh/ssh_host_rsa_key.

Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub.

The key fingerprint is:

9a:78:b1:4a:61:2d:d7:19:f0:c8:09:9c:cc:36:80:5c root@ubuntu

The key's randomart image is:

+--[ RSA 2048]----+

|..oE...          |

|..  Bo =         |

|   . .+ o        |

|     . . o       |

|    + + S        |

|   . = =         |

|    o =          |

|   . o           |

|    .            |

+-----------------+

Generating public/private dsa key pair.

Your identification has been saved in /etc/ssh/ssh_host_dsa_key.

Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub.

The key fingerprint is:

0b:3b:c2:9a:8a:72:79:67:af:9f:cb:e1:f2:fc:97:5d root@ubuntu

The key's randomart image is:

+--[ DSA 1024]----+

|                 |

|                 |

|                 |

|                 |

|      . S        |

|   .   o .      E|

|   .o o o    o . |

|o oo..+= o  o .  |

|+oo. o.*Xo..     |

+-----------------+

Generating public/private ecdsa key pair.

Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key.

Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub.

The key fingerprint is:

f1:7c:99:e4:12:91:f3:0b:6e:e9:9d:5d:d0:e1:1b:4f root@ubuntu

The key's randomart image is:

+--[ECDSA  256]---+

|          ..     |

|          o.   . |

|        . .o. ...|

|         +.+.o.oE|

|        S.+o=. o+|

|          +o.  .o|

|         o . o . |

|          . o .  |

|                 |

+-----------------+

Generating public/private ed25519 key pair.

Your identification has been saved in /etc/ssh/ssh_host_ed25519_key.

Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub.

The key fingerprint is:

77:69:6f:0d:02:e7:b2:f2:32:bc:37:b8:15:7d:9d:d1 root@ubuntu

The key's randomart image is:

+--[ED25519  256--+

|                 |

|                .|

|          . .  .E|

|           = . .o|

|        S + B o..|

|         . * + o |

|       ...o   o .|

|        =+o  .   |

|        o*..     |

+-----------------+

 * Starting Signal sysvinit that local filesystems are mounted[74G[ OK ]

 * Starting configure network device security[74G[ OK ]

 * Stopping Mount filesystems on boot[74G[ OK ]

 * Starting D-Bus system message bus[74G[ OK ]

 * Starting flush early job output to logs[74G[ OK ]

 * Stopping Failsafe Boot Delay[74G[ OK ]

 * Starting System V initialisation compatibility[74G[ OK ]

 * Starting SystemD login management service[74G[ OK ]

 * Stopping flush early job output to logs[74G[ OK ]

 * Starting configure virtual network devices[74G[ OK ]

 * Starting system logging daemon[74G[ OK ]

 * Starting Pollinate to seed the pseudo random number generator[74G[ OK ]

 * Starting Handle applying cloud-config[74G[ OK ]

 * Stopping Pollinate to seed the pseudo random number generator[74G[ OK ]

 * Starting Bridge file events into upstart[74G[ OK ]

 * Starting early crypto disks...       [80G 
[74G[ OK ]

Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd

 * Starting AppArmor profiles       [80G 
[74G[ OK ]

 * Starting iSCSI initiator service iscsid       [80G 
[74G[ OK ]



iscsiadm: No records found

 * Setting up iSCSI targets       [80G 
[74G[ OK ]

 * Mounting network filesystems       [80G 
[74G[ OK ]

Cloud-init v. 0.7.5 running 'modules:config' at Tue, 31 Jan 2017 21:09:59 +0000. Up 7.99 seconds.

 * Stopping System V initialisation compatibility[74G[ OK ]

 * Starting System V runlevel compatibility[74G[ OK ]

 * Starting deferred execution scheduler[74G[ OK ]

 * Starting regular background program processing daemon[74G[ OK ]

 * Starting ACPI daemon[74G[ OK ]

 * Starting save kernel messages[74G[ OK ]

 * Starting OpenSSH server[74G[ OK ]

 * Stopping save kernel messages[74G[ OK ]

 * Starting automatic crash report generation[74G[ OK ]

open-vm-tools: not starting as this is not a VMware VM

landscape-client is not configured, please run landscape-config.

 * Restoring resolver state...       [80G 
[74G[ OK ]

 * Stopping System V runlevel compatibility[74G[ OK ]

Generating locales...
  en_US.UTF-8... up-to-date
Generation complete.
Cloud-init v. 0.7.5 running 'modules:final' at Tue, 31 Jan 2017 21:10:00 +0000. Up 9.36 seconds.


Ubuntu 14.04.5 LTS ubuntu ttyS0

ubuntu login: Installing bcache-tools btrfs-tools lvm2 mdadm python-oauthlib xfsprogs
Get:1 http://security.ubuntu.com trusty-security InRelease [65.9 kB]
Ign http://archive.ubuntu.com trusty InRelease
Get:2 http://archive.ubuntu.com trusty-updates InRelease [65.9 kB]
Get:3 http://security.ubuntu.com trusty-security/main amd64 Packages [574 kB]
Hit http://archive.ubuntu.com trusty-backports InRelease
Hit http://archive.ubuntu.com trusty Release.gpg
Get:4 http://archive.ubuntu.com trusty-updates/main amd64 Packages [939 kB]
Get:5 http://security.ubuntu.com trusty-security/universe amd64 Packages [150 kB]
Get:6 http://archive.ubuntu.com trusty-updates/restricted amd64 Packages [16.4 kB]
Get:7 http://archive.ubuntu.com trusty-updates/universe amd64 Packages [396 kB]
Get:8 http://archive.ubuntu.com trusty-updates/multiverse amd64 Packages [14.0 kB]
Hit http://archive.ubuntu.com trusty-backports/main amd64 Packages
Hit http://archive.ubuntu.com trusty-backports/restricted amd64 Packages
Hit http://archive.ubuntu.com trusty-backports/universe amd64 Packages
Hit http://archive.ubuntu.com trusty-backports/multiverse amd64 Packages
Hit http://archive.ubuntu.com trusty Release
Hit http://archive.ubuntu.com trusty/main amd64 Packages
Hit http://archive.ubuntu.com trusty/restricted amd64 Packages
Hit http://archive.ubuntu.com trusty/universe amd64 Packages
Hit http://archive.ubuntu.com trusty/multiverse amd64 Packages
Fetched 2222 kB in 2s (1098 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
  libdevmapper-event1.02.1 libgmp10 liblzo2-2 libreadline5 python-crypto
  watershed
Suggested packages:
  thin-provisioning-tools python-crypto-dbg python-crypto-doc xfsdump acl attr
  quota
Recommended packages:
  default-mta mail-transport-agent
The following NEW packages will be installed:
  bcache-tools btrfs-tools libdevmapper-event1.02.1 libgmp10 liblzo2-2
  libreadline5 lvm2 mdadm python-crypto python-oauthlib watershed xfsprogs
0 upgraded, 12 newly installed, 0 to remove and 8 not upgraded.
Need to get 2406 kB of archives.
After this operation, 10.9 MB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu/ trusty/main libdevmapper-event1.02.1 amd64 2:1.02.77-6ubuntu2 [10.8 kB]
Get:2 http://archive.ubuntu.com/ubuntu/ trusty/main libgmp10 amd64 2:5.1.3+dfsg-1ubuntu1 [218 kB]
Get:3 http://archive.ubuntu.com/ubuntu/ trusty-updates/main liblzo2-2 amd64 2.06-1.2ubuntu1.1 [46.1 kB]
Get:4 http://archive.ubuntu.com/ubuntu/ trusty/main libreadline5 amd64 5.2+dfsg-2 [130 kB]
Get:5 http://archive.ubuntu.com/ubuntu/ trusty-updates/main bcache-tools amd64 1.0.7-1~14.04.1 [17.4 kB]
Get:6 http://archive.ubuntu.com/ubuntu/ trusty-updates/main btrfs-tools amd64 3.12-1ubuntu0.1 [334 kB]
Get:7 http://archive.ubuntu.com/ubuntu/ trusty/main watershed amd64 7 [11.4 kB]
Get:8 http://archive.ubuntu.com/ubuntu/ trusty/main lvm2 amd64 2.02.98-6ubuntu2 [470 kB]
Get:9 http://archive.ubuntu.com/ubuntu/ trusty-updates/main mdadm amd64 3.2.5-5ubuntu4.3 [362 kB]
Get:10 http://archive.ubuntu.com/ubuntu/ trusty/main python-crypto amd64 2.6.1-4build1 [239 kB]
Get:11 http://archive.ubuntu.com/ubuntu/ trusty/main python-oauthlib all 0.6.1-1 [59.4 kB]
Get:12 http://archive.ubuntu.com/ubuntu/ trusty/main xfsprogs amd64 3.1.9ubuntu2 [508 kB]
Preconfiguring packages ...
Fetched 2406 kB in 1s (2020 kB/s)
Selecting previously unselected package libdevmapper-event1.02.1:amd64.
(Reading database ... 56527 files and directories currently installed.)
Preparing to unpack .../libdevmapper-event1.02.1_2%3a1.02.77-6ubuntu2_amd64.deb ...
Unpacking libdevmapper-event1.02.1:amd64 (2:1.02.77-6ubuntu2) ...
Selecting previously unselected package libgmp10:amd64.
Preparing to unpack .../libgmp10_2%3a5.1.3+dfsg-1ubuntu1_amd64.deb ...
Unpacking libgmp10:amd64 (2:5.1.3+dfsg-1ubuntu1) ...
Selecting previously unselected package liblzo2-2:amd64.
Preparing to unpack .../liblzo2-2_2.06-1.2ubuntu1.1_amd64.deb ...
Unpacking liblzo2-2:amd64 (2.06-1.2ubuntu1.1) ...
Selecting previously unselected package libreadline5:amd64.
Preparing to unpack .../libreadline5_5.2+dfsg-2_amd64.deb ...
Unpacking libreadline5:amd64 (5.2+dfsg-2) ...
Selecting previously unselected package bcache-tools.
Preparing to unpack .../bcache-tools_1.0.7-1~14.04.1_amd64.deb ...
Unpacking bcache-tools (1.0.7-1~14.04.1) ...
Selecting previously unselected package btrfs-tools.
Preparing to unpack .../btrfs-tools_3.12-1ubuntu0.1_amd64.deb ...
Unpacking btrfs-tools (3.12-1ubuntu0.1) ...
Selecting previously unselected package watershed.
Preparing to unpack .../archives/watershed_7_amd64.deb ...
Unpacking watershed (7) ...
Selecting previously unselected package lvm2.
Preparing to unpack .../lvm2_2.02.98-6ubuntu2_amd64.deb ...
Unpacking lvm2 (2.02.98-6ubuntu2) ...
Selecting previously unselected package mdadm.
Preparing to unpack .../mdadm_3.2.5-5ubuntu4.3_amd64.deb ...
Unpacking mdadm (3.2.5-5ubuntu4.3) ...
Selecting previously unselected package python-crypto.
Preparing to unpack .../python-crypto_2.6.1-4build1_amd64.deb ...
Unpacking python-crypto (2.6.1-4build1) ...
Selecting previously unselected package python-oauthlib.
Preparing to unpack .../python-oauthlib_0.6.1-1_all.deb ...
Unpacking python-oauthlib (0.6.1-1) ...
Selecting previously unselected package xfsprogs.
Preparing to unpack .../xfsprogs_3.1.9ubuntu2_amd64.deb ...
Unpacking xfsprogs (3.1.9ubuntu2) ...
Processing triggers for man-db (2.6.7.1-1ubuntu1) ...
Processing triggers for ureadahead (0.100.0-16) ...
Setting up libdevmapper-event1.02.1:amd64 (2:1.02.77-6ubuntu2) ...
Setting up libgmp10:amd64 (2:5.1.3+dfsg-1ubuntu1) ...
Setting up liblzo2-2:amd64 (2.06-1.2ubuntu1.1) ...
Setting up libreadline5:amd64 (5.2+dfsg-2) ...
Setting up bcache-tools (1.0.7-1~14.04.1) ...
update-initramfs: deferring update (trigger activated)
Setting up btrfs-tools (3.12-1ubuntu0.1) ...
update-initramfs: deferring update (trigger activated)
Setting up watershed (7) ...
update-initramfs: deferring update (trigger activated)
Setting up lvm2 (2.02.98-6ubuntu2) ...
update-initramfs: deferring update (trigger activated)
Setting up mdadm (3.2.5-5ubuntu4.3) ...
Generating mdadm.conf... done.
 Removing any system startup links for /etc/init.d/mdadm-raid ...
update-initramfs: deferring update (trigger activated)
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-3.13.0-107-generic
Found initrd image: /boot/initrd.img-3.13.0-107-generic
File descriptor 3 (pipe:[13377]) leaked on lvs invocation. Parent PID 2351: /bin/sh
  No volume groups found
done
 * Starting MD monitoring service mdadm --monitor
   ...done.
Setting up python-crypto (2.6.1-4build1) ...
Setting up python-oauthlib (0.6.1-1) ...
Setting up xfsprogs (3.1.9ubuntu2) ...
Processing triggers for libc-bin (2.19-0ubuntu6.9) ...
Processing triggers for initramfs-tools (0.103ubuntu4.6) ...
update-initramfs: Generating /boot/initrd.img-3.13.0-107-generic
WARNING: missing /lib/modules/3.13.0-107-generic
Device driver support needs thus be built-in linux image!
depmod: ERROR: could not open directory /lib/modules/3.13.0-107-generic: No such file or directory
depmod: FATAL: could not search modules: No such file or directory
W: mdadm: /etc/mdadm/mdadm.conf defines no arrays.
depmod: WARNING: could not open /tmp/mkinitramfs_qJCwdk/lib/modules/3.13.0-107-generic/modules.order: No such file or directory
depmod: WARNING: could not open /tmp/mkinitramfs_qJCwdk/lib/modules/3.13.0-107-generic/modules.builtin: No such file or directory
Processing triggers for ureadahead (0.100.0-16) ...
start: cmd-install: started: curtin command install
unknown type for url 'http://10.245.168.20:43593//vmtest.root-tgz', assuming type 'tgz'
merged config: {'apt_proxy': '', 'hook_commands': {'builtin': ['curtin', 'hook']}, 'extract_commands': {'builtin': ['curtin', 'extract']}, 'network_commands': {'builtin': ['curtin', 'net-meta', 'auto']}, 'storage': {'version': 1, 'config': [{'grub_device': 1, 'name': 'main_disk', 'path': '/dev/vdb', 'ptable': 'gpt', 'type': 'disk', 'model': 'QEMU HARDDISK', 'id': 'sda'}, {'device': 'sda', 'flag': 'bios_grub', 'type': 'partition', 'id': 'bios_boot_partition', 'size': '1MB'}, {'device': 'sda', 'type': 'partition', 'id': 'sda1', 'size': '3GB'}, {'name': 'second_disk', 'path': '/dev/vdc', 'ptable': 'gpt', 'type': 'disk', 'model': 'QEMU HARDDISK', 'id': 'sdb'}, {'device': 'sdb', 'type': 'partition', 'id': 'sdb1', 'size': '3GB'}, {'raidlevel': 1, 'type': 'raid', 'id': 'mddevice', 'devices': ['sda1', 'sdb1'], 'name': 'md0'}, {'volume': 'mddevice', 'type': 'format', 'id': 'md_root', 'fstype': 'ext4'}, {'device': 'md_root', 'path': '/', 'type': 'mount', 'id': 'md_mount'}]}, 'curthooks_commands': {'builtin': ['curtin', 'curthooks']}, 'sources': {'00_cmdline': {'type': 'tgz', 'uri': 'http://10.245.168.20:43593//vmtest.root-tgz'}}, 'install': {'log_file': '/var/log/curtin/install.log'}, 'showtrace': True, 'late_commands': {'builtin': []}, 'partitioning_commands': {'builtin': ['curtin', 'block-meta', 'simple']}, 'stages': ['early', 'partitioning', 'network', 'extract', 'curthooks', 'hook', 'late'], 'apply_net_commands': {'builtin': []}}
'reporter' not found in config file.
{'OUTPUT_NETWORK_STATE': '/tmp/tmpu2biPl/state/network_state', 'OUTPUT_NETWORK_CONFIG': '/tmp/tmpu2biPl/state/network_config', 'CONFIG': '/tmp/tmpu2biPl/state/config', 'OUTPUT_FSTAB': '/tmp/tmpu2biPl/state/fstab', 'WORKING_DIR': '/tmp/tmpu2biPl/scratch', 'TARGET_MOUNT_POINT': '/tmp/tmpu2biPl/target', 'OUTPUT_INTERFACES': '/tmp/tmpu2biPl/state/interfaces'}
start: cmd-install/stage-early: started: preparing for installation
stage_early took 0.000 seconds
finish: cmd-install/stage-early: SUCCESS: finished: preparing for installation
start: cmd-install/stage-partitioning: started: configuring storage
start: cmd-install/stage-partitioning/builtin: started: running 'curtin block-meta simple'
start: cmd-install/stage-partitioning/builtin/cmd-block-meta: started: curtin command block-meta
start: cmd-install/stage-partitioning/builtin/cmd-block-meta: started: removing previous storage devices
Running command ['mdadm', '--assemble', '--scan', '-v'] with allowed return codes [0, 1, 2] (shell=False, capture=True)
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
Running command ['modprobe', 'bcache'] with allowed return codes [0, 1] (shell=False, capture=False)
Current device storage tree:

finish: cmd-install/stage-partitioning/builtin/cmd-block-meta: SUCCESS: finished: removing previous storage devices
start: cmd-install/stage-partitioning/builtin/cmd-block-meta: started: configuring disk: sda
get_path_to_storage_volume for volume sda
devsync for /dev/vdb
Running command ['partprobe', '/dev/vdb'] with allowed return codes [0, 1] (shell=False, capture=False)
Error: /dev/vdb: unrecognised disk label
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
devsync happy - path /dev/vdb now exists
return volume path /dev/vdb
labeling device: '/dev/vdb' with 'gpt' partition table
Running command ['sgdisk', '--clear', '/dev/vdb'] with allowed return codes [0] (shell=False, capture=False)
Creating new GPT entries.
The operation has completed successfully.
get_path_to_storage_volume for volume sda
devsync for /dev/vdb
Running command ['partprobe', '/dev/vdb'] with allowed return codes [0, 1] (shell=False, capture=False)
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
devsync happy - path /dev/vdb now exists
return volume path /dev/vdb
Running command ['blkid', '-o', 'export', '/dev/vdb'] with allowed return codes [0, 2] (shell=False, capture=True)
Can't find a uuid for volume: sda. Skipping dname.
finish: cmd-install/stage-partitioning/builtin/cmd-block-meta: SUCCESS: finished: configuring disk: sda
start: cmd-install/stage-partitioning/builtin/cmd-block-meta: started: configuring partition: bios_boot_partition
get_path_to_storage_volume for volume sda
devsync for /dev/vdb
Running command ['partprobe', '/dev/vdb'] with allowed return codes [0, 1] (shell=False, capture=False)
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
devsync happy - path /dev/vdb now exists
return volume path /dev/vdb
partition 'number' key not set in config:
{
 "device": "sda",
 "flag": "bios_grub",
 "id": "bios_boot_partition",
 "size": "1MB",
 "type": "partition"
}
path_to_kname input: '/dev/vdb' output: 'vdb'
path_to_kname input: '/dev/vdb' output: 'vdb'
path_to_kname input: '/dev/vdb' output: 'vdb'
vdb logical_block_size_bytes: 512
adding partition 'bios_boot_partition' to disk 'sda' (ptable: 'gpt')
partnum: 1 offset_sectors: 2048 length_sectors: 2047
Running command ['sgdisk', '--new', '1:2048:4095', '--typecode=1:ef02', '/dev/vdb'] with allowed return codes [0] (shell=False, capture=True)
get_path_to_storage_volume for volume bios_boot_partition
partition 'number' key not set in config:
{
 "device": "sda",
 "flag": "bios_grub",
 "id": "bios_boot_partition",
 "size": "1MB",
 "type": "partition"
}
get_path_to_storage_volume for volume sda
devsync for /dev/vdb
Running command ['partprobe', '/dev/vdb'] with allowed return codes [0, 1] (shell=False, capture=False)
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
devsync happy - path /dev/vdb now exists
return volume path /dev/vdb
path_to_kname input: '/dev/vdb' output: 'vdb'
kname_to_path input: 'vdb1' output: '/dev/vdb1'
devsync for /dev/vdb
Running command ['partprobe', '/dev/vdb'] with allowed return codes [0, 1] (shell=False, capture=False)
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
devsync happy - path /dev/vdb now exists
return volume path /dev/vdb1
Running command ['blkid', '-o', 'export', '/dev/vdb1'] with allowed return codes [0, 2] (shell=False, capture=True)
Can't find a uuid for volume: bios_boot_partition. Skipping dname.
finish: cmd-install/stage-partitioning/builtin/cmd-block-meta: SUCCESS: finished: configuring partition: bios_boot_partition
start: cmd-install/stage-partitioning/builtin/cmd-block-meta: started: configuring partition: sda1
get_path_to_storage_volume for volume sda
devsync for /dev/vdb
Running command ['partprobe', '/dev/vdb'] with allowed return codes [0, 1] (shell=False, capture=False)
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
devsync happy - path /dev/vdb now exists
return volume path /dev/vdb
partition 'number' key not set in config:
{
 "device": "sda",
 "id": "sda1",
 "size": "3GB",
 "type": "partition"
}
path_to_kname input: '/dev/vdb' output: 'vdb'
path_to_kname input: '/dev/vdb' output: 'vdb'
path_to_kname input: '/dev/vdb' output: 'vdb'
vdb logical_block_size_bytes: 512
partition 'number' key not set in config:
{
 "device": "sda",
 "flag": "bios_grub",
 "id": "bios_boot_partition",
 "size": "1MB",
 "type": "partition"
}
previous partition number for 'sda1' found to be '1'
previous partition: /sys/class/block/vdb/vdb1
previous partition.size_sectors: 2048
previous partition.start_sectors: 2048
adding partition 'sda1' to disk 'sda' (ptable: 'gpt')
partnum: 2 offset_sectors: 4096 length_sectors: 6291455
Running command ['sgdisk', '--new', '2:4096:6295551', '--typecode=2:8300', '/dev/vdb'] with allowed return codes [0] (shell=False, capture=True)
get_path_to_storage_volume for volume sda1
partition 'number' key not set in config:
{
 "device": "sda",
 "id": "sda1",
 "size": "3GB",
 "type": "partition"
}
get_path_to_storage_volume for volume sda
devsync for /dev/vdb
Running command ['partprobe', '/dev/vdb'] with allowed return codes [0, 1] (shell=False, capture=False)
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
devsync happy - path /dev/vdb now exists
return volume path /dev/vdb
path_to_kname input: '/dev/vdb' output: 'vdb'
kname_to_path input: 'vdb2' output: '/dev/vdb2'
devsync for /dev/vdb
Running command ['partprobe', '/dev/vdb'] with allowed return codes [0, 1] (shell=False, capture=False)
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
devsync happy - path /dev/vdb now exists
return volume path /dev/vdb2
Running command ['blkid', '-o', 'export', '/dev/vdb2'] with allowed return codes [0, 2] (shell=False, capture=True)
Can't find a uuid for volume: sda1. Skipping dname.
finish: cmd-install/stage-partitioning/builtin/cmd-block-meta: SUCCESS: finished: configuring partition: sda1
start: cmd-install/stage-partitioning/builtin/cmd-block-meta: started: configuring disk: sdb
get_path_to_storage_volume for volume sdb
devsync for /dev/vdc
Running command ['partprobe', '/dev/vdc'] with allowed return codes [0, 1] (shell=False, capture=False)
Error: /dev/vdc: unrecognised disk label
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
devsync happy - path /dev/vdc now exists
return volume path /dev/vdc
labeling device: '/dev/vdc' with 'gpt' partition table
Running command ['sgdisk', '--clear', '/dev/vdc'] with allowed return codes [0] (shell=False, capture=False)
Creating new GPT entries.
The operation has completed successfully.
get_path_to_storage_volume for volume sdb
devsync for /dev/vdc
Running command ['partprobe', '/dev/vdc'] with allowed return codes [0, 1] (shell=False, capture=False)
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
devsync happy - path /dev/vdc now exists
return volume path /dev/vdc
Running command ['blkid', '-o', 'export', '/dev/vdc'] with allowed return codes [0, 2] (shell=False, capture=True)
Can't find a uuid for volume: sdb. Skipping dname.
finish: cmd-install/stage-partitioning/builtin/cmd-block-meta: SUCCESS: finished: configuring disk: sdb
start: cmd-install/stage-partitioning/builtin/cmd-block-meta: started: configuring partition: sdb1
get_path_to_storage_volume for volume sdb
devsync for /dev/vdc
Running command ['partprobe', '/dev/vdc'] with allowed return codes [0, 1] (shell=False, capture=False)
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
devsync happy - path /dev/vdc now exists
return volume path /dev/vdc
partition 'number' key not set in config:
{
 "device": "sdb",
 "id": "sdb1",
 "size": "3GB",
 "type": "partition"
}
path_to_kname input: '/dev/vdc' output: 'vdc'
path_to_kname input: '/dev/vdc' output: 'vdc'
path_to_kname input: '/dev/vdc' output: 'vdc'
vdc logical_block_size_bytes: 512
adding partition 'sdb1' to disk 'sdb' (ptable: 'gpt')
partnum: 1 offset_sectors: 2048 length_sectors: 6291455
Running command ['sgdisk', '--new', '1:2048:6293503', '--typecode=1:8300', '/dev/vdc'] with allowed return codes [0] (shell=False, capture=True)
get_path_to_storage_volume for volume sdb1
partition 'number' key not set in config:
{
 "device": "sdb",
 "id": "sdb1",
 "size": "3GB",
 "type": "partition"
}
get_path_to_storage_volume for volume sdb
devsync for /dev/vdc
Running command ['partprobe', '/dev/vdc'] with allowed return codes [0, 1] (shell=False, capture=False)
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
devsync happy - path /dev/vdc now exists
return volume path /dev/vdc
path_to_kname input: '/dev/vdc' output: 'vdc'
kname_to_path input: 'vdc1' output: '/dev/vdc1'
devsync for /dev/vdc
Running command ['partprobe', '/dev/vdc'] with allowed return codes [0, 1] (shell=False, capture=False)
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
devsync happy - path /dev/vdc now exists
return volume path /dev/vdc1
Running command ['blkid', '-o', 'export', '/dev/vdc1'] with allowed return codes [0, 2] (shell=False, capture=True)
Can't find a uuid for volume: sdb1. Skipping dname.
finish: cmd-install/stage-partitioning/builtin/cmd-block-meta: SUCCESS: finished: configuring partition: sdb1
start: cmd-install/stage-partitioning/builtin/cmd-block-meta: started: configuring raid: mddevice
raid: cfg: {
 "devices": [
  "sda1",
  "sdb1"
 ],
 "id": "mddevice",
 "name": "md0",
 "raidlevel": 1,
 "type": "raid"
}
get_path_to_storage_volume for volume sda1
partition 'number' key not set in config:
{
 "device": "sda",
 "id": "sda1",
 "size": "3GB",
 "type": "partition"
}
get_path_to_storage_volume for volume sda
devsync for /dev/vdb
Running command ['partprobe', '/dev/vdb'] with allowed return codes [0, 1] (shell=False, capture=False)
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
devsync happy - path /dev/vdb now exists
return volume path /dev/vdb
path_to_kname input: '/dev/vdb' output: 'vdb'
kname_to_path input: 'vdb2' output: '/dev/vdb2'
devsync for /dev/vdb
Running command ['partprobe', '/dev/vdb'] with allowed return codes [0, 1] (shell=False, capture=False)
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
devsync happy - path /dev/vdb now exists
return volume path /dev/vdb2
get_path_to_storage_volume for volume sdb1
partition 'number' key not set in config:
{
 "device": "sdb",
 "id": "sdb1",
 "size": "3GB",
 "type": "partition"
}
get_path_to_storage_volume for volume sdb
devsync for /dev/vdc
Running command ['partprobe', '/dev/vdc'] with allowed return codes [0, 1] (shell=False, capture=False)
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
devsync happy - path /dev/vdc now exists
return volume path /dev/vdc
path_to_kname input: '/dev/vdc' output: 'vdc'
kname_to_path input: 'vdc1' output: '/dev/vdc1'
devsync for /dev/vdc
Running command ['partprobe', '/dev/vdc'] with allowed return codes [0, 1] (shell=False, capture=False)
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
devsync happy - path /dev/vdc now exists
return volume path /dev/vdc1
raid: device path mapping: [('sda1', '/dev/vdb2'), ('sdb1', '/dev/vdc1')]
mdadm_create: md_name=/dev/md0 raidlevel=1  devices=['/dev/vdb2', '/dev/vdc1'] spares=[] name=
Running command ['hostname', '-s'] with allowed return codes [0] (shell=False, capture=True)
Running command ['mdadm', '--zero-superblock', '/dev/vdb2'] with allowed return codes [0] (shell=False, capture=True)
Running command ['mdadm', '--zero-superblock', '/dev/vdc1'] with allowed return codes [0] (shell=False, capture=True)
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
Running command ['udevadm', 'control', '--stop-exec-queue'] with allowed return codes [0] (shell=False, capture=False)
Running command ['mdadm', '--create', '/dev/md0', '--run', u'--homehost=ubuntu', '--level=1', '--raid-devices=2', '/dev/vdb2', '/dev/vdc1'] with allowed return codes [0] (shell=False, capture=True)
Running command ['udevadm', 'control', '--start-exec-queue'] with allowed return codes [0] (shell=False, capture=False)
Running command ['udevadm', 'settle', '--exit-if-exists=/dev/md0'] with allowed return codes [0] (shell=False, capture=False)
get_path_to_storage_volume for volume mddevice
devsync for /dev/md0
Running command ['partprobe', '/dev/md0'] with allowed return codes [0, 1] (shell=False, capture=False)
Error: /dev/md0: unrecognised disk label
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
devsync happy - path /dev/md0 now exists
return volume path /dev/md0
Running command ['mdadm', '--query', '--detail', '/dev/md0'] with allowed return codes [0] (shell=False, capture=True)
Writing dname udev rule '['SUBSYSTEM=="block"', 'ACTION=="add|change"', u'ENV{MD_UUID}=="00ea68ae:5acc39d1:4acf1228:486b8a20"', 'SYMLINK+="disk/by-dname/md0"']'
Running command ['mdadm', '--detail', '--scan'] with allowed return codes [0] (shell=False, capture=True)
finish: cmd-install/stage-partitioning/builtin/cmd-block-meta: SUCCESS: finished: configuring raid: mddevice
start: cmd-install/stage-partitioning/builtin/cmd-block-meta: started: configuring format: md_root
get_path_to_storage_volume for volume mddevice
devsync for /dev/md0
Running command ['partprobe', '/dev/md0'] with allowed return codes [0, 1] (shell=False, capture=False)
Error: /dev/md0: unrecognised disk label
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
devsync happy - path /dev/md0 now exists
return volume path /dev/md0
mkfs /dev/md0 info: {'volume': 'mddevice', 'type': 'format', 'id': 'md_root', 'fstype': 'ext4'}
Running command ['lsblk', '--noheadings', '--bytes', '--pairs', '--output=ALIGNMENT,DISC-ALN,DISC-GRAN,DISC-MAX,DISC-ZERO,FSTYPE,GROUP,KNAME,LABEL,LOG-SEC,MAJ:MIN,MIN-IO,MODE,MODEL,MOUNTPOINT,NAME,OPT-IO,OWNER,PHY-SEC,RM,RO,ROTA,RQ-SIZE,SIZE,STATE,TYPE,UUID', '/dev/md0'] with allowed return codes [0] (shell=False, capture=True)
get_blockdev_sector_size: info:
{
 "md0": {
  "ALIGNMENT": "0",
  "DISC-ALN": "0",
  "DISC-GRAN": "0",
  "DISC-MAX": "0",
  "DISC-ZERO": "0",
  "FSTYPE": "",
  "GROUP": "disk",
  "KNAME": "md0",
  "LABEL": "",
  "LOG-SEC": "512",
  "MAJ:MIN": "9:0",
  "MIN-IO": "512",
  "MODE": "brw-rw----",
  "MODEL": "",
  "MOUNTPOINT": "",
  "NAME": "md0",
  "OPT-IO": "0",
  "OWNER": "root",
  "PHY-SEC": "512",
  "RM": "0",
  "RO": "0",
  "ROTA": "1",
  "RQ-SIZE": "128",
  "SIZE": "3219062784",
  "STATE": "",
  "TYPE": "raid1",
  "UUID": "",
  "device_path": "/dev/md0"
 }
}
Running command ['mkfs.ext4', '-F', '-U', 'a9c4bb98-e7f9-11e6-a826-525400123456', '/dev/md0'] with allowed return codes [0] (shell=False, capture=True)
finish: cmd-install/stage-partitioning/builtin/cmd-block-meta: SUCCESS: finished: configuring format: md_root
start: cmd-install/stage-partitioning/builtin/cmd-block-meta: started: configuring mount: md_mount
get_path_to_storage_volume for volume mddevice
devsync for /dev/md0
Running command ['partprobe', '/dev/md0'] with allowed return codes [0, 1] (shell=False, capture=False)
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
devsync happy - path /dev/md0 now exists
return volume path /dev/md0
Running command ['mount', '/dev/md0', '/tmp/tmpu2biPl/target/'] with allowed return codes [0] (shell=False, capture=False)
get_path_to_storage_volume for volume mddevice
devsync for /dev/md0
Running command ['partprobe', '/dev/md0'] with allowed return codes [0, 1] (shell=False, capture=False)
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
devsync happy - path /dev/md0 now exists
return volume path /dev/md0
finish: cmd-install/stage-partitioning/builtin/cmd-block-meta: SUCCESS: finished: configuring mount: md_mount
finish: cmd-install/stage-partitioning/builtin/cmd-block-meta: SUCCESS: finished: curtin command block-meta
finish: cmd-install/stage-partitioning/builtin: SUCCESS: finished: running 'curtin block-meta simple'
builtin took 6.243 seconds
stage_partitioning took 6.243 seconds
finish: cmd-install/stage-partitioning: SUCCESS: finished: configuring storage
start: cmd-install/stage-network: started: configuring network
start: cmd-install/stage-network/builtin: started: running 'curtin net-meta auto'
start: cmd-install/stage-network/builtin/cmd-net-meta: started: curtin command net-meta
net-meta mode is 'dhcp'.  devices=['eth0']
writing to file /tmp/tmpu2biPl/state/network_config with network config: network:
  config:
  - mac_address: '52:54:00:12:34:56'
    name: eth0
    subnets:
    - type: dhcp4
    type: physical
  version: 1

finish: cmd-install/stage-network/builtin/cmd-net-meta: SUCCESS: finished: curtin command net-meta
finish: cmd-install/stage-network/builtin: SUCCESS: finished: running 'curtin net-meta auto'
builtin took 0.330 seconds
stage_network took 0.331 seconds
finish: cmd-install/stage-network: SUCCESS: finished: configuring network
start: cmd-install/stage-extract: started: writing install sources to disk
start: cmd-install/stage-extract/builtin: started: running 'curtin extract'
start: cmd-install/stage-extract/builtin/cmd-extract: started: curtin command extract
Installing sources: [{'type': 'tgz', 'uri': 'http://10.245.168.20:43593//vmtest.root-tgz'}] to target at /tmp/tmpu2biPl/target
start: cmd-install/stage-extract/builtin/cmd-extract: started: acquiring and extracting image from http://10.245.168.20:43593//vmtest.root-tgz
Running command ['tar', '--help'] with allowed return codes [0] (shell=False, capture=True)
Running command ['sh', '-cf', 'wget "$1" --progress=dot:mega -O - |smtar -C "$2" --xattrs --xattrs-include=* -Sxpf - --numeric-owner', '--', 'http://10.245.168.20:43593//vmtest.root-tgz', '/tmp/tmpu2biPl/target'] with allowed return codes [0] (shell=False, capture=False)
--2017-01-31 21:10:17--  http://10.245.168.20:43593//vmtest.root-tgz
Connecting to 10.245.168.20:43593... connected.
HTTP request sent, awaiting response... 200 OK
Length: 343607278 (328M) [application/octet-stream]
Saving to: 'STDOUT'

     0K ........ ........ ........ ........ ........ ........  0% 16.3M 20s
  3072K ........ ........ ........ ........ ........ ........  1% 13.8M 22s
  6144K ........ ........ ........ ........ ........ ........  2% 23.0M 19s
  9216K ........ ........ ........ ........ ........ ........  3% 19.1M 18s
 12288K ........ ........ ........ ........ ........ ........  4% 22.2M 17s
 15360K ........ ........ ........ ........ ........ ........  5% 19.2M 17s
 18432K ........ ........ ........ ........ ........ ........  6% 30.9M 16s
 21504K ........ ........ ........ ........ ........ ........  7% 27.8M 15s
 24576K ........ ........ ........ ........ ........ ........  8% 18.2M 15s
 27648K ........ ........ ........ ........ ........ ........  9% 15.5M 15s
 30720K ........ ........ ........ ........ ........ ........ 10% 21.1M 15s
 33792K ........ ........ ........ ........ ........ ........ 10% 21.6M 15s
 36864K ........ ........ ........ ........ ........ ........ 11% 23.4M 14s
 39936K ........ ........ ........ ........ ........ ........ 12% 16.6M 15s
 43008K ........ ........ ........ ........ ........ ........ 13% 14.1M 15s
 46080K ........ ........ ........ ........ ........ ........ 14% 22.3M 14s
 49152K ........ ........ ........ ........ ........ ........ 15% 16.1M 14s
 52224K ........ ........ ........ ........ ........ ........ 16% 21.6M 14s
 55296K ........ ........ ........ ........ ........ ........ 17% 21.1M 14s
 58368K ........ ........ ........ ........ ........ ........ 18% 24.6M 14s
 61440K ........ ........ ........ ........ ........ ........ 19% 17.1M 14s
 64512K ........ ........ ........ ........ ........ ........ 20% 23.3M 13s
 67584K ........ ........ ........ ........ ........ ........ 21% 24.9M 13s
 70656K ........ ........ ........ ........ ........ ........ 21% 26.5M 13s
 73728K ........ ........ ........ ........ ........ ........ 22% 23.1M 13s
 76800K ........ ........ ........ ........ ........ ........ 23% 15.8M 13s
 79872K ........ ........ ........ ........ ........ ........ 24% 17.0M 13s
 82944K ........ ........ ........ ........ ........ ........ 25% 15.0M 12s
 86016K ........ ........ ........ ........ ........ ........ 26% 17.1M 12s
 89088K ........ ........ ........ ........ ........ ........ 27% 17.8M 12s
 92160K ........ ........ ........ ........ ........ ........ 28% 24.8M 12s
 95232K ........ ........ ........ ........ ........ ........ 29% 14.1M 12s
 98304K ........ ........ ........ ........ ........ ........ 30% 16.3M 12s
101376K ........ ........ ........ ........ ........ ........ 31% 25.3M 12s
104448K ........ ........ ........ ........ ........ ........ 32% 27.2M 11s
107520K ........ ........ ........ ........ ........ ........ 32% 35.3M 11s
110592K ........ ........ ........ ........ ........ ........ 33% 23.6M 11s
113664K ........ ........ ........ ........ ........ ........ 34% 26.5M 11s
116736K ........ ........ ........ ........ ........ ........ 35% 16.6M 11s
119808K ........ ........ ........ ........ ........ ........ 36% 26.7M 10s
122880K ........ ........ ........ ........ ........ ........ 37% 24.5M 10s
125952K ........ ........ ........ ........ ........ ........ 38% 20.4M 10s
129024K ........ ........ ........ ........ ........ ........ 39% 17.4M 10s
132096K ........ ........ ........ ........ ........ ........ 40% 10.4M 10s
135168K ........ ........ ........ ........ ........ ........ 41% 5.53M 10s
138240K ........ ........ ........ ........ ........ ........ 42% 14.4M 10s
141312K ........ ........ ........ ........ ........ ........ 43% 12.5M 10s
144384K ........ ........ ........ ........ ........ ........ 43% 10.4M 10s
147456K ........ ........ ........ ........ ........ ........ 44% 4.97M 11s
150528K ........ ........ ........ ........ ........ ........ 45% 33.6M 10s
153600K ........ ........ ........ ........ ........ ........ 46% 35.2M 10s
156672K ........ ........ ........ ........ ........ ........ 47% 35.0M 10s
159744K ........ ........ ........ ........ ........ ........ 48% 30.8M 10s
162816K ........ ........ ........ ........ ........ ........ 49% 58.8M 9s
165888K ........ ........ ........ ........ ........ ........ 50% 61.3M 9s
168960K ........ ........ ........ ........ ........ ........ 51% 52.8M 9s
172032K ........ ........ ........ ........ ........ ........ 52% 53.6M 8s
175104K ........ ........ ........ ........ ........ ........ 53% 51.0M 8s
178176K ........ ........ ........ ........ ........ ........ 54% 46.1M 8s
181248K ........ ........ ........ ........ ........ ........ 54% 16.6M 8s
184320K ........ ........ ........ ........ ........ ........ 55% 13.9M 8s
187392K ........ ........ ........ ........ ........ ........ 56% 13.6M 8s
190464K ........ ........ ........ ........ ........ ........ 57% 22.1M 7s
193536K ........ ........ ........ ........ ........ ........ 58% 24.9M 7s
196608K ........ ........ ........ ........ ........ ........ 59% 19.6M 7s
199680K ........ ........ ........ ........ ........ ........ 60% 14.5M 7s
202752K ........ ........ ........ ........ ........ ........ 61% 8.81M 7s
205824K ........ ........ ........ ........ ........ ........ 62% 20.1M 7s
208896K ........ ........ ........ ........ ........ ........ 63% 25.7M 7s
211968K ........ ........ ........ ........ ........ ........ 64% 19.0M 6s
215040K ........ ........ ........ ........ ........ ........ 65% 20.5M 6s
218112K ........ ........ ........ ........ ........ ........ 65% 19.8M 6s
221184K ........ ........ ........ ........ ........ ........ 66% 20.9M 6s
224256K ........ ........ ........ ........ ........ ........ 67% 18.6M 6s
227328K ........ ........ ........ ........ ........ ........ 68% 20.5M 6s
230400K ........ ........ ........ ........ ........ ........ 69% 19.7M 5s
233472K ........ ........ ........ ........ ........ ........ 70% 23.5M 5s
236544K ........ ........ ........ ........ ........ ........ 71% 19.4M 5s
239616K ........ ........ ........ ........ ........ ........ 72% 20.8M 5s
242688K ........ ........ ........ ........ ........ ........ 73% 18.8M 5s
245760K ........ ........ ........ ........ ........ ........ 74% 21.6M 5s
248832K ........ ........ ........ ........ ........ ........ 75% 17.5M 4s
251904K ........ ........ ........ ........ ........ ........ 75% 21.3M 4s
254976K ........ ........ ........ ........ ........ ........ 76% 19.9M 4s
258048K ........ ........ ........ ........ ........ ........ 77% 18.4M 4s
261120K ........ ........ ........ ........ ........ ........ 78% 24.0M 4s
264192K ........ ........ ........ ........ ........ ........ 79% 24.3M 4s
267264K ........ ........ ........ ........ ........ ........ 80% 27.6M 3s
270336K ........ ........ ........ ........ ........ ........ 81% 22.2M 3s
273408K ........ ........ ........ ........ ........ ........ 82% 35.5M 3s
276480K ........ ........ ........ ........ ........ ........ 83% 32.6M 3s
279552K ........ ........ ........ ........ ........ ........ 84% 32.5M 3s
282624K ........ ........ ........ ........ ........ ........ 85% 43.1M 3s
285696K ........ ........ ........ ........ ........ ........ 86% 33.3M 2s
288768K ........ ........ ........ ........ ........ ........ 86% 25.8M 2s
291840K ........ ........ ........ ........ ........ ........ 87% 24.9M 2s
294912K ........ ........ ........ ........ ........ ........ 88% 26.6M 2s
297984K ........ ........ ........ ........ ........ ........ 89% 26.8M 2s
301056K ........ ........ ........ ........ ........ ........ 90% 19.3M 2s
304128K ........ ........ ........ ........ ........ ........ 91% 32.1M 1s
307200K ........ ........ ........ ........ ........ ........ 92% 33.0M 1s
310272K ........ ........ ........ ........ ........ ........ 93% 37.1M 1s
313344K ........ ........ ........ ........ ........ ........ 94% 27.8M 1s
316416K ........ ........ ........ ........ ........ ........ 95% 29.2M 1s
319488K ........ ........ ........ ........ ........ ........ 96% 24.4M 1s
322560K ........ ........ ........ ........ ........ ........ 97% 25.7M 0s
325632K ........ ........ ........ ........ ........ ........ 97% 17.8M 0s
328704K ........ ........ ........ ........ ........ ........ 98% 25.3M 0s
331776K ........ ........ ........ ........ ........ ........ 99% 24.6M 0s
334848K ........ ...                                         100% 15.4M=16s

2017-01-31 21:10:33 (20.1 MB/s) - written to stdout [343607278/343607278]

finish: cmd-install/stage-extract/builtin/cmd-extract: SUCCESS: finished: acquiring and extracting image from http://10.245.168.20:43593//vmtest.root-tgz
finish: cmd-install/stage-extract/builtin/cmd-extract: SUCCESS: finished: curtin command extract
finish: cmd-install/stage-extract/builtin: SUCCESS: finished: running 'curtin extract'
builtin took 16.731 seconds
stage_extract took 16.731 seconds
finish: cmd-install/stage-extract: SUCCESS: finished: writing install sources to disk
start: cmd-install/stage-curthooks: started: configuring installed system
start: cmd-install/stage-curthooks/builtin: started: running 'curtin curthooks'
start: cmd-install/stage-curthooks/builtin/cmd-curthooks: started: curtin command curthooks
start: cmd-install/stage-curthooks/builtin/cmd-curthooks: started: writing config files and configuring apt
Transferred  into new format: None
curthooks handling apt to target /tmp/tmpu2biPl/target with config {'proxy': ''}
Running command ['chroot', '/tmp/tmpu2biPl/target', 'lsb_release', '--all'] with allowed return codes [0] (shell=False, capture=True)
Running command ['chroot', '/tmp/tmpu2biPl/target', 'dpkg', '--print-architecture'] with allowed return codes [0] (shell=False, capture=True)
got primary mirror: None
got security mirror: None
Apt Mirror info: {'SECURITY': 'http://security.ubuntu.com/ubuntu/', 'PRIMARY': 'http://archive.ubuntu.com/ubuntu/', 'MIRROR': 'http://archive.ubuntu.com/ubuntu/'}
debconf_selections was not set in config
renaming /tmp/tmpu2biPl/target/etc/overlayroot.local.conf to /tmp/tmpu2biPl/target/etc/overlayroot.local.conf.old
finish: cmd-install/stage-curthooks/builtin/cmd-curthooks: SUCCESS: finished: writing config files and configuring apt
Running command ['chroot', '/tmp/tmpu2biPl/target', 'dpkg-query', '--list'] with allowed return codes [0] (shell=False, capture=True)
start: cmd-install/stage-curthooks/builtin/cmd-curthooks: started: Installing packages on target system: ['mdadm']
Running command ['mount', '--bind', '/dev', '/tmp/tmpu2biPl/target/dev'] with allowed return codes [0] (shell=False, capture=False)
Running command ['mount', '--bind', '/proc', '/tmp/tmpu2biPl/target/proc'] with allowed return codes [0] (shell=False, capture=False)
Running command ['mount', '--bind', '/sys', '/tmp/tmpu2biPl/target/sys'] with allowed return codes [0] (shell=False, capture=False)
Running command ['chroot', '/tmp/tmpu2biPl/target', 'apt-get', '--quiet', '--option=Acquire::Languages=none', '--option=Dir::Etc::sourcelist=/tmp/tmpsfgT6I/sources.list', '--option=Dir::Etc::sourceparts=/tmp/tmpsfgT6I/sources.list.d', 'update'] with allowed return codes [0] (shell=False, capture=False)
Get:1 http://security.ubuntu.com trusty-security InRelease [65.9 kB]
Ign http://archive.ubuntu.com trusty InRelease
Get:2 http://archive.ubuntu.com trusty-updates InRelease [65.9 kB]
Get:3 http://security.ubuntu.com trusty-security/main amd64 Packages [574 kB]
Hit http://archive.ubuntu.com trusty-backports InRelease
Hit http://archive.ubuntu.com trusty Release.gpg
Get:4 http://archive.ubuntu.com trusty-updates/main amd64 Packages [939 kB]
Get:5 http://security.ubuntu.com trusty-security/restricted amd64 Packages [13.4 kB]
Get:6 http://security.ubuntu.com trusty-security/universe amd64 Packages [150 kB]
Get:7 http://security.ubuntu.com trusty-security/multiverse amd64 Packages [4136 B]
Get:8 http://archive.ubuntu.com trusty-updates/restricted amd64 Packages [16.4 kB]
Get:9 http://archive.ubuntu.com trusty-updates/universe amd64 Packages [396 kB]
Get:10 http://archive.ubuntu.com trusty-updates/multiverse amd64 Packages [14.0 kB]
Hit http://archive.ubuntu.com trusty-backports/main amd64 Packages
Hit http://archive.ubuntu.com trusty-backports/restricted amd64 Packages
Hit http://archive.ubuntu.com trusty-backports/universe amd64 Packages
Hit http://archive.ubuntu.com trusty-backports/multiverse amd64 Packages
Hit http://archive.ubuntu.com trusty Release
Hit http://archive.ubuntu.com trusty/main amd64 Packages
Hit http://archive.ubuntu.com trusty/restricted amd64 Packages
Hit http://archive.ubuntu.com trusty/universe amd64 Packages
Hit http://archive.ubuntu.com trusty/multiverse amd64 Packages
Fetched 2240 kB in 2s (960 kB/s)
Reading package lists...
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
Running command ['umount', '/tmp/tmpu2biPl/target/sys'] with allowed return codes [0] (shell=False, capture=False)
Running command ['umount', '/tmp/tmpu2biPl/target/proc'] with allowed return codes [0] (shell=False, capture=False)
Running command ['umount', '/tmp/tmpu2biPl/target/dev'] with allowed return codes [0] (shell=False, capture=False)
Running command ['mount', '--bind', '/dev', '/tmp/tmpu2biPl/target/dev'] with allowed return codes [0] (shell=False, capture=False)
Running command ['mount', '--bind', '/proc', '/tmp/tmpu2biPl/target/proc'] with allowed return codes [0] (shell=False, capture=False)
Running command ['mount', '--bind', '/sys', '/tmp/tmpu2biPl/target/sys'] with allowed return codes [0] (shell=False, capture=False)
Running command ['chroot', '/tmp/tmpu2biPl/target', 'eatmydata', 'apt-get', '--quiet', '--assume-yes', '--option=Dpkg::options::=--force-unsafe-io', '--option=Dpkg::Options::=--force-confold', 'install', 'mdadm'] with allowed return codes [0] (shell=False, capture=False)
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
  postfix ssl-cert
Suggested packages:
  procmail postfix-mysql postfix-pgsql postfix-ldap postfix-pcre sasl2-bin
  dovecot-common postfix-cdb mail-reader postfix-doc openssl-blacklist
Recommended packages:
  default-mta mail-transport-agent
The following NEW packages will be installed:
  mdadm postfix ssl-cert
0 upgraded, 3 newly installed, 0 to remove and 8 not upgraded.
Need to get 1463 kB of archives.
After this operation, 4904 kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu/ trusty-updates/main mdadm amd64 3.2.5-5ubuntu4.3 [362 kB]
Get:2 http://archive.ubuntu.com/ubuntu/ trusty/main ssl-cert all 1.0.33 [16.6 kB]
Get:3 http://archive.ubuntu.com/ubuntu/ trusty-updates/main postfix amd64 2.11.0-1ubuntu1 [1084 kB]
Preconfiguring packages ...
Fetched 1463 kB in 0s (2186 kB/s)
Selecting previously unselected package mdadm.
(Reading database ... 56527 files and directories currently installed.)
Preparing to unpack .../mdadm_3.2.5-5ubuntu4.3_amd64.deb ...
Unpacking mdadm (3.2.5-5ubuntu4.3) ...
Selecting previously unselected package ssl-cert.
Preparing to unpack .../ssl-cert_1.0.33_all.deb ...
Unpacking ssl-cert (1.0.33) ...
Selecting previously unselected package postfix.
Preparing to unpack .../postfix_2.11.0-1ubuntu1_amd64.deb ...
Unpacking postfix (2.11.0-1ubuntu1) ...
Processing triggers for ureadahead (0.100.0-16) ...
Processing triggers for man-db (2.6.7.1-1ubuntu1) ...
Processing triggers for ufw (0.34~rc-0ubuntu2) ...
Setting up mdadm (3.2.5-5ubuntu4.3) ...
Generating mdadm.conf... done.
 Removing any system startup links for /etc/init.d/mdadm-raid ...
update-initramfs: deferring update (trigger activated)
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-3.13.0-107-generic
Found initrd image: /boot/initrd.img-3.13.0-107-generic
done
invoke-rc.d: policy-rc.d denied execution of start.
Setting up ssl-cert (1.0.33) ...
hostname: Name or service not known
make-ssl-cert: Could not get FQDN, using "ubuntu".
make-ssl-cert: You may want to fix your /etc/hosts and/or DNS setup and run
make-ssl-cert: make-ssl-cert generate-default-snakeoil --force-overwrite
make-ssl-cert: again.
Setting up postfix (2.11.0-1ubuntu1) ...
Adding group `postfix' (GID 112) ...
Done.
Adding system user `postfix' (UID 106) ...
Adding new user `postfix' (UID 106) with group `postfix' ...
Not creating home directory `/var/spool/postfix'.
Creating /etc/postfix/dynamicmaps.cf
Adding tcp map entry to /etc/postfix/dynamicmaps.cf
Adding sqlite map entry to /etc/postfix/dynamicmaps.cf
Adding group `postdrop' (GID 113) ...
Done.
setting myhostname: ubuntu
setting alias maps
setting alias database
mailname is not a fully qualified domain name.  Not changing /etc/mailname.
setting destinations: localdomain, localhost, localhost.localdomain, localhost
setting relayhost: 
setting mynetworks: 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
setting mailbox_size_limit: 0
setting recipient_delimiter: +
setting inet_interfaces: all
setting inet_protocols: all
/etc/aliases does not exist, creating it.
WARNING: /etc/aliases exists, but does not have a root alias.

Postfix is now set up with a default configuration.  If you need to make 
changes, edit
/etc/postfix/main.cf (and others) as needed.  To view Postfix configuration
values, see postconf(1).

After modifying main.cf, be sure to run '/etc/init.d/postfix reload'.

Running newaliases
invoke-rc.d: policy-rc.d denied execution of restart.
Processing triggers for ureadahead (0.100.0-16) ...
Processing triggers for initramfs-tools (0.103ubuntu4.6) ...
update-initramfs: Generating /boot/initrd.img-3.13.0-107-generic
mdadm: cannot open /dev/md/0: No such file or directory
Processing triggers for ufw (0.34~rc-0ubuntu2) ...
Processing triggers for libc-bin (2.19-0ubuntu6.9) ...
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
Running command ['umount', '/tmp/tmpu2biPl/target/sys'] with allowed return codes [0] (shell=False, capture=False)
Running command ['umount', '/tmp/tmpu2biPl/target/proc'] with allowed return codes [0] (shell=False, capture=False)
Running command ['umount', '/tmp/tmpu2biPl/target/dev'] with allowed return codes [0] (shell=False, capture=False)
finish: cmd-install/stage-curthooks/builtin/cmd-curthooks: SUCCESS: finished: Installing packages on target system: ['mdadm']
copying mdadm.conf into target
Running command ['chroot', '/tmp/tmpu2biPl/target', 'dpkg-reconfigure', '--frontend=noninteractive', 'mdadm'] with allowed return codes [0] (shell=False, capture=False)
W: mdadm: failed to load MD subsystem.
 Removing any system startup links for /etc/init.d/mdadm-raid ...
update-initramfs: deferring update (trigger activated)
/usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?).
Processing triggers for initramfs-tools (0.103ubuntu4.6) ...
update-initramfs: Generating /boot/initrd.img-3.13.0-107-generic
df: Warning: cannot read table of mounted file systems: No such file or directory
warning: failed to read mtab
cat: /proc/cmdline: No such file or directory
start: cmd-install/stage-curthooks/builtin/cmd-curthooks: started: installing kernel
Running command ['dpkg', '--print-architecture'] with allowed return codes [0] (shell=False, capture=True)
Running command ['chroot', '/tmp/tmpu2biPl/target', 'lsb_release', '--codename', '--short'] with allowed return codes [0] (shell=False, capture=True)
Running command ['chroot', '/tmp/tmpu2biPl/target', 'apt-cache', 'pkgnames'] with allowed return codes [0] (shell=False, capture=True)
Running command ['chroot', '/tmp/tmpu2biPl/target', 'dpkg-query', '--show', '--showformat', '${db:Status-Abbrev}', 'linux-generic-lts-utopic'] with allowed return codes [0] (shell=False, capture=True)
installing kernel package 'linux-generic-lts-utopic'
Running command ['mount', '--bind', '/dev', '/tmp/tmpu2biPl/target/dev'] with allowed return codes [0] (shell=False, capture=False)
Running command ['mount', '--bind', '/proc', '/tmp/tmpu2biPl/target/proc'] with allowed return codes [0] (shell=False, capture=False)
Running command ['mount', '--bind', '/sys', '/tmp/tmpu2biPl/target/sys'] with allowed return codes [0] (shell=False, capture=False)
Running command ['chroot', '/tmp/tmpu2biPl/target', 'eatmydata', 'apt-get', '--quiet', '--assume-yes', '--option=Dpkg::options::=--force-unsafe-io', '--option=Dpkg::Options::=--force-confold', 'install', 'linux-generic-lts-utopic'] with allowed return codes [0] (shell=False, capture=False)
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
  linux-headers-3.16.0-77 linux-headers-3.16.0-77-generic
  linux-headers-generic-lts-utopic linux-image-3.16.0-77-generic
  linux-image-extra-3.16.0-77-generic linux-image-generic-lts-utopic
Suggested packages:
  fdutils linux-lts-utopic-tools
The following NEW packages will be installed:
  linux-generic-lts-utopic linux-headers-3.16.0-77
  linux-headers-3.16.0-77-generic linux-headers-generic-lts-utopic
  linux-image-3.16.0-77-generic linux-image-extra-3.16.0-77-generic
  linux-image-generic-lts-utopic
0 upgraded, 7 newly installed, 0 to remove and 8 not upgraded.
Need to get 63.6 MB of archives.
After this operation, 281 MB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu/ trusty-updates/main linux-image-3.16.0-77-generic amd64 3.16.0-77.99~14.04.1 [16.2 MB]
Get:2 http://archive.ubuntu.com/ubuntu/ trusty-updates/main linux-image-extra-3.16.0-77-generic amd64 3.16.0-77.99~14.04.1 [37.6 MB]
Get:3 http://archive.ubuntu.com/ubuntu/ trusty-updates/main linux-image-generic-lts-utopic amd64 3.16.0.77.68 [2276 B]
Get:4 http://archive.ubuntu.com/ubuntu/ trusty-updates/main linux-headers-3.16.0-77 all 3.16.0-77.99~14.04.1 [9066 kB]
Get:5 http://archive.ubuntu.com/ubuntu/ trusty-updates/main linux-headers-3.16.0-77-generic amd64 3.16.0-77.99~14.04.1 [704 kB]
Get:6 http://archive.ubuntu.com/ubuntu/ trusty-updates/main linux-headers-generic-lts-utopic amd64 3.16.0.77.68 [2266 B]
Get:7 http://archive.ubuntu.com/ubuntu/ trusty-updates/main linux-generic-lts-utopic amd64 3.16.0.77.68 [1802 B]
Fetched 63.6 MB in 2s (23.7 MB/s)
Selecting previously unselected package linux-image-3.16.0-77-generic.
(Reading database ... 56779 files and directories currently installed.)
Preparing to unpack .../linux-image-3.16.0-77-generic_3.16.0-77.99~14.04.1_amd64.deb ...
Done.
Unpacking linux-image-3.16.0-77-generic (3.16.0-77.99~14.04.1) ...
Selecting previously unselected package linux-image-extra-3.16.0-77-generic.
Preparing to unpack .../linux-image-extra-3.16.0-77-generic_3.16.0-77.99~14.04.1_amd64.deb ...
Unpacking linux-image-extra-3.16.0-77-generic (3.16.0-77.99~14.04.1) ...
Selecting previously unselected package linux-image-generic-lts-utopic.
Preparing to unpack .../linux-image-generic-lts-utopic_3.16.0.77.68_amd64.deb ...
Unpacking linux-image-generic-lts-utopic (3.16.0.77.68) ...
Selecting previously unselected package linux-headers-3.16.0-77.
Preparing to unpack .../linux-headers-3.16.0-77_3.16.0-77.99~14.04.1_all.deb ...
Unpacking linux-headers-3.16.0-77 (3.16.0-77.99~14.04.1) ...
Selecting previously unselected package linux-headers-3.16.0-77-generic.
Preparing to unpack .../linux-headers-3.16.0-77-generic_3.16.0-77.99~14.04.1_amd64.deb ...
Unpacking linux-headers-3.16.0-77-generic (3.16.0-77.99~14.04.1) ...
Selecting previously unselected package linux-headers-generic-lts-utopic.
Preparing to unpack .../linux-headers-generic-lts-utopic_3.16.0.77.68_amd64.deb ...
Unpacking linux-headers-generic-lts-utopic (3.16.0.77.68) ...
Selecting previously unselected package linux-generic-lts-utopic.
Preparing to unpack .../linux-generic-lts-utopic_3.16.0.77.68_amd64.deb ...
Unpacking linux-generic-lts-utopic (3.16.0.77.68) ...
Setting up linux-image-3.16.0-77-generic (3.16.0-77.99~14.04.1) ...
Running depmod.
update-initramfs: deferring update (hook will be called later)
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
update-initramfs: Generating /boot/initrd.img-3.16.0-77-generic
mdadm: cannot open /dev/md/0: No such file or directory
run-parts: executing /etc/kernel/postinst.d/update-notifier 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
run-parts: executing /etc/kernel/postinst.d/x-grub-legacy-ec2 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
Searching for GRUB installation directory ... found: /boot/grub
Searching for default file ... found: /boot/grub/default
Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst
Searching for splash image ... none found, skipping ...
Found kernel: /boot/vmlinuz-3.16.0-77-generic
Found kernel: /boot/vmlinuz-3.13.0-107-generic
Replacing config file /run/grub/menu.lst with new version
Updating /boot/grub/menu.lst ... done

run-parts: executing /etc/kernel/postinst.d/zz-update-grub 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-3.16.0-77-generic
Found initrd image: /boot/initrd.img-3.16.0-77-generic
Found linux image: /boot/vmlinuz-3.13.0-107-generic
Found initrd image: /boot/initrd.img-3.13.0-107-generic
done
Setting up linux-image-extra-3.16.0-77-generic (3.16.0-77.99~14.04.1) ...
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
update-initramfs: Generating /boot/initrd.img-3.16.0-77-generic
mdadm: cannot open /dev/md/0: No such file or directory
run-parts: executing /etc/kernel/postinst.d/update-notifier 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
run-parts: executing /etc/kernel/postinst.d/x-grub-legacy-ec2 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
Searching for GRUB installation directory ... found: /boot/grub
Searching for default file ... found: /boot/grub/default
Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst
Searching for splash image ... none found, skipping ...
Found kernel: /boot/vmlinuz-3.16.0-77-generic
Found kernel: /boot/vmlinuz-3.13.0-107-generic
Updating /boot/grub/menu.lst ... done

run-parts: executing /etc/kernel/postinst.d/zz-update-grub 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-3.16.0-77-generic
Found initrd image: /boot/initrd.img-3.16.0-77-generic
Found linux image: /boot/vmlinuz-3.13.0-107-generic
Found initrd image: /boot/initrd.img-3.13.0-107-generic
done
Setting up linux-image-generic-lts-utopic (3.16.0.77.68) ...
Setting up linux-headers-3.16.0-77 (3.16.0-77.99~14.04.1) ...
Setting up linux-headers-3.16.0-77-generic (3.16.0-77.99~14.04.1) ...
Setting up linux-headers-generic-lts-utopic (3.16.0.77.68) ...
Setting up linux-generic-lts-utopic (3.16.0.77.68) ...
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
Running command ['umount', '/tmp/tmpu2biPl/target/sys'] with allowed return codes [0] (shell=False, capture=False)
Running command ['umount', '/tmp/tmpu2biPl/target/proc'] with allowed return codes [0] (shell=False, capture=False)
Running command ['umount', '/tmp/tmpu2biPl/target/dev'] with allowed return codes [0] (shell=False, capture=False)
finish: cmd-install/stage-curthooks/builtin/cmd-curthooks: SUCCESS: finished: installing kernel
start: cmd-install/stage-curthooks/builtin/cmd-curthooks: started: setting up swap
Not creating swap: suggested size was 0
finish: cmd-install/stage-curthooks/builtin/cmd-curthooks: SUCCESS: finished: setting up swap
start: cmd-install/stage-curthooks/builtin/cmd-curthooks: started: apply networking
applying network_config
Writing /tmp/tmpu2biPl/target/etc/network/interfaces
Writing /tmp/tmpu2biPl/target/etc/udev/rules.d/70-persistent-net.rules
Writing /tmp/tmpu2biPl/target/etc/cloud/cloud.cfg.d/curtin-disable-cloudinit-networking.cfg
del_file: removed /tmp/tmpu2biPl/target/etc/network/interfaces.d/eth0.cfg
removed /tmp/tmpu2biPl/target/etc/network/interfaces.d/eth0.cfg with known contents
Attempting to remove ipv6 privacy extensions
deleting file: /tmp/tmpu2biPl/target/etc/sysctl.d/10-ipv6-privacy.conf
del_file: removed /tmp/tmpu2biPl/target/etc/sysctl.d/10-ipv6-privacy.conf
Injecting fix for ipv6 mtu settings: /tmp/tmpu2biPl/target/etc/network/if-pre-up.d/mtuipv6
Injecting fix for ipv6 mtu settings: /tmp/tmpu2biPl/target/etc/network/if-up.d/mtuipv6
finish: cmd-install/stage-curthooks/builtin/cmd-curthooks: SUCCESS: finished: apply networking
start: cmd-install/stage-curthooks/builtin/cmd-curthooks: started: writing etc/fstab
finish: cmd-install/stage-curthooks/builtin/cmd-curthooks: SUCCESS: finished: writing etc/fstab
start: cmd-install/stage-curthooks/builtin/cmd-curthooks: started: configuring multipath
Running command ['lsblk', '--noheadings', '--bytes', '--pairs', '--output=ALIGNMENT,DISC-ALN,DISC-GRAN,DISC-MAX,DISC-ZERO,FSTYPE,GROUP,KNAME,LABEL,LOG-SEC,MAJ:MIN,MIN-IO,MODE,MODEL,MOUNTPOINT,NAME,OPT-IO,OWNER,PHY-SEC,RM,RO,ROTA,RQ-SIZE,SIZE,STATE,TYPE,UUID', '--nodeps'] with allowed return codes [0] (shell=False, capture=True)
Running command ['lsblk', '--noheadings', '--bytes', '--pairs', '--output=ALIGNMENT,DISC-ALN,DISC-GRAN,DISC-MAX,DISC-ZERO,FSTYPE,GROUP,KNAME,LABEL,LOG-SEC,MAJ:MIN,MIN-IO,MODE,MODEL,MOUNTPOINT,NAME,OPT-IO,OWNER,PHY-SEC,RM,RO,ROTA,RQ-SIZE,SIZE,STATE,TYPE,UUID', '/dev/vda'] with allowed return codes [0] (shell=False, capture=True)
Running command ['lsblk', '--noheadings', '--bytes', '--pairs', '--output=ALIGNMENT,DISC-ALN,DISC-GRAN,DISC-MAX,DISC-ZERO,FSTYPE,GROUP,KNAME,LABEL,LOG-SEC,MAJ:MIN,MIN-IO,MODE,MODEL,MOUNTPOINT,NAME,OPT-IO,OWNER,PHY-SEC,RM,RO,ROTA,RQ-SIZE,SIZE,STATE,TYPE,UUID', '/dev/sr0'] with allowed return codes [0] (shell=False, capture=True)
Running command ['lsblk', '--noheadings', '--bytes', '--pairs', '--output=ALIGNMENT,DISC-ALN,DISC-GRAN,DISC-MAX,DISC-ZERO,FSTYPE,GROUP,KNAME,LABEL,LOG-SEC,MAJ:MIN,MIN-IO,MODE,MODEL,MOUNTPOINT,NAME,OPT-IO,OWNER,PHY-SEC,RM,RO,ROTA,RQ-SIZE,SIZE,STATE,TYPE,UUID', '/dev/vdb'] with allowed return codes [0] (shell=False, capture=True)
Running command ['lsblk', '--noheadings', '--bytes', '--pairs', '--output=ALIGNMENT,DISC-ALN,DISC-GRAN,DISC-MAX,DISC-ZERO,FSTYPE,GROUP,KNAME,LABEL,LOG-SEC,MAJ:MIN,MIN-IO,MODE,MODEL,MOUNTPOINT,NAME,OPT-IO,OWNER,PHY-SEC,RM,RO,ROTA,RQ-SIZE,SIZE,STATE,TYPE,UUID', '/dev/vdc'] with allowed return codes [0] (shell=False, capture=True)
no devices found to rescan
Running command ['blkid', '-o', 'full'] with allowed return codes [0] (shell=False, capture=True)
detect_multipath found blkid info: {u'/dev/vdb2': {'UUID_SUB': '4b0e10d1-1d5e-0eec-79d8-0f2b9fc7eb1b', 'TYPE': 'linux_raid_member', 'UUID': '00ea68ae-5acc-39d1-4acf-1228486b8a20', 'LABEL': 'ubuntu:0'}, u'/dev/vdc1': {'UUID_SUB': '080d4c26-56d0-1f82-3b64-26c8cdb61e1a', 'TYPE': 'linux_raid_member', 'UUID': '00ea68ae-5acc-39d1-4acf-1228486b8a20', 'LABEL': 'ubuntu:0'}, u'/dev/vda': {'TYPE': 'ext4', 'UUID': 'd904b278-bb57-48ba-8e79-4f417f4ece7e', 'LABEL': 'cloudimg-rootfs'}, u'/dev/md0': {'TYPE': 'ext4', 'UUID': 'a9c4bb98-e7f9-11e6-a826-525400123456'}}
Running command ['lsblk', '--noheadings', '--bytes', '--pairs', '--output=ALIGNMENT,DISC-ALN,DISC-GRAN,DISC-MAX,DISC-ZERO,FSTYPE,GROUP,KNAME,LABEL,LOG-SEC,MAJ:MIN,MIN-IO,MODE,MODEL,MOUNTPOINT,NAME,OPT-IO,OWNER,PHY-SEC,RM,RO,ROTA,RQ-SIZE,SIZE,STATE,TYPE,UUID'] with allowed return codes [0] (shell=False, capture=True)
target_devs: ['/dev/md0']
/dev/md0: a9c4bb98-e7f9-11e6-a826-525400123456
finish: cmd-install/stage-curthooks/builtin/cmd-curthooks: SUCCESS: finished: configuring multipath
start: cmd-install/stage-curthooks/builtin/cmd-curthooks: started: updating packages on target system
system_upgrade disabled by config.
finish: cmd-install/stage-curthooks/builtin/cmd-curthooks: SUCCESS: finished: updating packages on target system
setup grub on target /tmp/tmpu2biPl/target
checking: {'grub_device': 1, 'name': 'main_disk', 'path': '/dev/vdb', 'ptable': 'gpt', 'type': 'disk', 'model': 'QEMU HARDDISK', 'id': 'sda'}
get_path_to_storage_volume for volume sda
devsync for /dev/vdb
Running command ['partprobe', '/dev/vdb'] with allowed return codes [0, 1] (shell=False, capture=False)
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
devsync happy - path /dev/vdb now exists
return volume path /dev/vdb
install_devices: ['/dev/vdb']
installing grub to ['/dev/vdb'] [replace_default=True]
Running command ['mount', '--bind', '/dev', '/tmp/tmpu2biPl/target/dev'] with allowed return codes [0] (shell=False, capture=False)
Running command ['mount', '--bind', '/proc', '/tmp/tmpu2biPl/target/proc'] with allowed return codes [0] (shell=False, capture=False)
Running command ['mount', '--bind', '/sys', '/tmp/tmpu2biPl/target/sys'] with allowed return codes [0] (shell=False, capture=False)
Running command ['install-grub', '/tmp/tmpu2biPl/target', '/dev/vdb'] with allowed return codes [0] (shell=False, capture=False)
moved etc/default/grub.d/50-cloudimg-settings.cfg out of the way
carryover command line params: console=ttyS0 
installing grub-pc to: /dev/vdb
Replacing config file /etc/default/grub with new version
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-3.16.0-77-generic
Found initrd image: /boot/initrd.img-3.16.0-77-generic
Found linux image: /boot/vmlinuz-3.13.0-107-generic
Found initrd image: /boot/initrd.img-3.13.0-107-generic
done
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-3.16.0-77-generic
Found initrd image: /boot/initrd.img-3.16.0-77-generic
Found linux image: /boot/vmlinuz-3.13.0-107-generic
Found initrd image: /boot/initrd.img-3.13.0-107-generic
done
Installing for i386-pc platform.
Installation finished. No error reported.
Running command ['udevadm', 'settle'] with allowed return codes [0] (shell=False, capture=False)
Running command ['umount', '/tmp/tmpu2biPl/target/sys'] with allowed return codes [0] (shell=False, capture=False)
Running command ['umount', '/tmp/tmpu2biPl/target/proc'] with allowed return codes [0] (shell=False, capture=False)
Running command ['umount', '/tmp/tmpu2biPl/target/dev'] with allowed return codes [0] (shell=False, capture=False)
finish: cmd-install/stage-curthooks/builtin/cmd-curthooks: SUCCESS: finished: curtin command curthooks
finish: cmd-install/stage-curthooks/builtin: SUCCESS: finished: running 'curtin curthooks'
builtin took 62.442 seconds
stage_curthooks took 62.443 seconds
finish: cmd-install/stage-curthooks: SUCCESS: finished: configuring installed system
start: cmd-install/stage-hook: started: finalizing installation
start: cmd-install/stage-hook/builtin: started: running 'curtin hook'
start: cmd-install/stage-hook/builtin/cmd-hook: started: curtin command hook
Finalizing /tmp/tmpu2biPl/target
finish: cmd-install/stage-hook/builtin/cmd-hook: SUCCESS: finished: curtin command hook
finish: cmd-install/stage-hook/builtin: SUCCESS: finished: running 'curtin hook'
builtin took 0.406 seconds
stage_hook took 0.406 seconds
finish: cmd-install/stage-hook: SUCCESS: finished: finalizing installation
start: cmd-install/stage-late: started: executing late commands
stage_late took 0.000 seconds
finish: cmd-install/stage-late: SUCCESS: finished: executing late commands
curtin: Installation finished.
Running command ['lsblk', '--noheadings', '--bytes', '--pairs', '--output=ALIGNMENT,DISC-ALN,DISC-GRAN,DISC-MAX,DISC-ZERO,FSTYPE,GROUP,KNAME,LABEL,LOG-SEC,MAJ:MIN,MIN-IO,MODE,MODEL,MOUNTPOINT,NAME,OPT-IO,OWNER,PHY-SEC,RM,RO,ROTA,RQ-SIZE,SIZE,STATE,TYPE,UUID'] with allowed return codes [0] (shell=False, capture=True)
Running command ['umount', '/tmp/tmpu2biPl/target'] with allowed return codes [0] (shell=False, capture=False)
finish: cmd-install: SUCCESS: finished: curtin command install
ci-info: no authorized ssh keys fingerprints found for user ubuntu.
ci-info: no authorized ssh keys fingerprints found for user ubuntu.
ec2: 
ec2: #############################################################
ec2: -----BEGIN SSH HOST KEY FINGERPRINTS-----
ec2: 1024 0b:3b:c2:9a:8a:72:79:67:af:9f:cb:e1:f2:fc:97:5d  root@ubuntu (DSA)
ec2: 256 f1:7c:99:e4:12:91:f3:0b:6e:e9:9d:5d:d0:e1:1b:4f  root@ubuntu (ECDSA)
ec2: 256 77:69:6f:0d:02:e7:b2:f2:32:bc:37:b8:15:7d:9d:d1  root@ubuntu (ED25519)
ec2: 2048 9a:78:b1:4a:61:2d:d7:19:f0:c8:09:9c:cc:36:80:5c  root@ubuntu (RSA)
ec2: -----END SSH HOST KEY FINGERPRINTS-----
ec2: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBLhJ/+wdMdMMXCax2417OI26wwU/MYkGRBNOGi6Qmi9pQ578wYqZ6QiL8XSOogf8QDw9Z8a7C2TbAtXoAHMp10E= root@ubuntu
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIJjw1CFFjp6LnismxS89gFzxfbE8v2wzYSCLOg7U/p1i root@ubuntu
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDj5/3ESleWxbcca+1lpMXOJOfcIt8kwVFBA5cPZTs1sE9B/eUQibTNSQZPIYkJ5LiCsjrIGj3AUizc65n40YLU/XqaJ6jT0lLq5EGH2sadziObNN/OO0S4B2j/pobm2n+mFnr1A+dcyROhQPp+hdYhFsZDIuQcyR516IVUrisiHvRpgd030pc4JYGJGip5bH/oNtGdAUJ/TIEu5yUacTSz0FqANNgvr6jS4+OYxCvZHXkijQM3oxkOSR+xgJQPUah1j/KAruhx5ps0XZk+43oT8G5kfvymQxnvQ/D4UB9AJxgEbh1NVXquqonIv1Sjesey1DFiwEFRXEaFrZzusDL/ root@ubuntu
-----END SSH HOST KEY KEYS-----
Cloud-init v. 0.7.5 finished at Tue, 31 Jan 2017 21:11:36 +0000. Datasource DataSourceNoCloudNet [seed=cmdline,http://10.245.168.20:43593/][dsmode=net].  Up 105.06 seconds
Tue Jan 31 21:11:36 UTC 2017: shutting down for poweroff [up 105s].
wait-for-state stop/waiting
 * Stopping landscape-client daemon       [80G 
[74G[[31mfail[39;49m]
 * Stopping rsync daemon rsync       [80G 
[74G[ OK ]
 * Stopping MD monitoring service mdadm --monitor       [80G 
[74G[ OK ]
 * Stopping open-vm guest daemon vmtoolsd       [80G 
[74G[ OK ]
 * Unmounting iscsi-backed filesystems       [80G 
[74G[ OK ]
 [33m*[39;49m /etc/iscsi/iscsi.initramfs present, not stopping iscsid yet
 * Waiting for MD arrays to become idle...       [80G 
[74G[ OK ]
 * Asking all remaining processes to terminate...       [80G 
[74G[ OK ]
 * All processes ended within 1 seconds...       [80G 
[74G[ OK ]
 * Unmounting temporary filesystems...       [80G 
[74G[ OK ]
 * Deactivating swap...       [80G 
[74G[ OK ]
 * Stopping early crypto disks...       [80G 
[74G[ OK ]
mount: / is busy
 * Will now halt
[  107.014327] reboot: Power down
