[ 0.000000] CPU0 microcode updated early to revision 0x19, date = 2013-06-21 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.16.0-37-generic (buildd@toyol) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #51-Ubuntu SMP Tue May 5 13:45:59 UTC 2015 (Ubuntu 3.16.0-37.51-generic 3.16.7-ckt9) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.16.0-37-generic root=/dev/mapper/jupiter-root ro quiet splash nomodeset ipv6.disable=1 acpi_enforce_resources=lax crashkernel=384M-:128M vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfedffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfee0000-0x00000000dfee0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfee1000-0x00000000dfeeffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dfef0000-0x00000000dfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000031fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. X58A-UD3R/X58A-UD3R, BIOS F8b 10/07/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x320000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CCFFF write-protect [ 0.000000] CD000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 100000000 mask F00000000 write-back [ 0.000000] 3 base 200000000 mask E00000000 write-back [ 0.000000] 4 base 300000000 mask FE0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 2, base: 4GB, range: 4GB, type WB [ 0.000000] reg 3, base: 8GB, range: 8GB, type WB [ 0.000000] reg 4, base: 12GB, range: 512MB, type WB [ 0.000000] total RAM covered: 15872M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 2, base: 4GB, range: 4GB, type WB [ 0.000000] reg 3, base: 8GB, range: 8GB, type WB [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdfee0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f5ee0-0x000f5eef] mapped at [ffff8800000f5ee0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE [ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE [ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x31fe00000-0x31fffffff] [ 0.000000] [mem 0x31fe00000-0x31fffffff] page 2M [ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x31c000000-0x31fdfffff] [ 0.000000] [mem 0x31c000000-0x31fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x300000000-0x31bffffff] [ 0.000000] [mem 0x300000000-0x31bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdfedffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xdfdfffff] page 2M [ 0.000000] [mem 0xdfe00000-0xdfedffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff] [ 0.000000] [mem 0x100000000-0x2ffffffff] page 2M [ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE [ 0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x34158000-0x360a3fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F7660 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 0x00000000DFEE1040 000044 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 0x00000000DFEE10C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 0x00000000DFEE1180 005975 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 0x00000000DFEE0000 000040 [ 0.000000] ACPI: MSDM 0x00000000DFEE6CC0 000055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: HPET 0x00000000DFEE6D80 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 0x00000000DFEE6E00 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: EUDS 0x00000000DFEE6E40 0004D0 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 0x00000000DFEE7310 000CB2 (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 0x00000000DFEE6B40 00012C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 0x00000000DFEE8000 00352C (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000031fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x31fffffff] [ 0.000000] NODE_DATA [mem 0x31fff1000-0x31fff5fff] [ 0.000000] Reserving 128MB of memory at 704MB for crashkernel (System RAM: 12286MB) [ 0.000000] [ffffea0000000000-ffffea000c7fffff] PMD -> [ffff880313600000-ffff88031f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x31fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xdfedffff] [ 0.000000] node 0: [mem 0x100000000-0x31fffffff] [ 0.000000] On node 0 totalpages: 3145340 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14268 pages used for memmap [ 0.000000] DMA32 zone: 913120 pages, LIFO batch:31 [ 0.000000] Normal zone: 34816 pages used for memmap [ 0.000000] Normal zone: 2228224 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfee0000-0xdfee0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfee1000-0xdfeeffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfef0000-0xdfefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdff00000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xdff00000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88031fc00000 s82432 r8192 d24064 u131072 [ 0.000000] pcpu-alloc: s82432 r8192 d24064 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096171 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-37-generic root=/dev/mapper/jupiter-root ro quiet splash nomodeset ipv6.disable=1 acpi_enforce_resources=lax crashkernel=384M-:128M vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 12137172K/12581360K available (7750K kernel code, 1197K rwdata, 3612K rodata, 1360K init, 1308K bss, 444188K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-15. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.000000] NR_IRQS:16640 nr_irqs:808 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 50331648 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: PIT calibration matches HPET. 1 loops [ 0.000000] tsc: Detected 2664.770 MHz processor [ 0.000030] Calibrating delay loop (skipped), value calculated using timer frequency.. 5329.54 BogoMIPS (lpj=10659080) [ 0.000032] pid_max: default: 32768 minimum: 301 [ 0.000039] ACPI: Core revision 20140424 [ 0.004908] ACPI: All ACPI Tables successfully acquired [ 0.008678] Security Framework initialized [ 0.008697] AppArmor: AppArmor initialized [ 0.008698] Yama: becoming mindful. [ 0.009675] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.012541] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.013778] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.013796] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.014040] Initializing cgroup subsys memory [ 0.014062] Initializing cgroup subsys devices [ 0.014067] Initializing cgroup subsys freezer [ 0.014070] Initializing cgroup subsys net_cls [ 0.014073] Initializing cgroup subsys blkio [ 0.014077] Initializing cgroup subsys perf_event [ 0.014079] Initializing cgroup subsys net_prio [ 0.014085] Initializing cgroup subsys hugetlb [ 0.014103] CPU: Physical Processor ID: 0 [ 0.014104] CPU: Processor Core ID: 0 [ 0.014108] mce: CPU supports 9 MCE banks [ 0.014116] CPU0: Thermal monitoring enabled (TM1) [ 0.014124] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 tlb_flushall_shift: 6 [ 0.014203] Freeing SMP alternatives memory: 32K (ffffffff81e81000 - ffffffff81e89000) [ 0.015134] ftrace: allocating 29340 entries in 115 pages [ 0.027773] Switched APIC routing to physical flat. [ 0.028149] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.067804] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (fam: 06, model: 1a, stepping: 05) [ 0.173041] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver. [ 0.173055] perf_event_intel: CPU erratum AAJ80 worked around [ 0.173056] perf_event_intel: CPUID marked event: 'bus cycles' unavailable [ 0.173058] ... version: 3 [ 0.173059] ... bit width: 48 [ 0.173060] ... generic registers: 4 [ 0.173060] ... value mask: 0000ffffffffffff [ 0.173061] ... max period: 000000007fffffff [ 0.173062] ... fixed-purpose events: 3 [ 0.173063] ... event mask: 000000070000000f [ 0.174786] x86: Booting SMP configuration: [ 0.174788] .... node #0, CPUs: #1 [ 0.185350] CPU1 microcode updated early to revision 0x19, date = 2013-06-21 [ 0.188039] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.188116] #2 [ 0.198643] CPU2 microcode updated early to revision 0x19, date = 2013-06-21 [ 0.201320] #3 [ 0.211838] CPU3 microcode updated early to revision 0x19, date = 2013-06-21 [ 0.214530] #4 #5 #6 #7 [ 0.267283] x86: Booted up 1 node, 8 CPUs [ 0.267287] smpboot: Total of 8 processors activated (42636.32 BogoMIPS) [ 0.272423] devtmpfs: initialized [ 0.275116] evm: security.selinux [ 0.275117] evm: security.SMACK64 [ 0.275118] evm: security.SMACK64EXEC [ 0.275119] evm: security.SMACK64TRANSMUTE [ 0.275120] evm: security.SMACK64MMAP [ 0.275121] evm: security.ima [ 0.275121] evm: security.capability [ 0.275186] PM: Registering ACPI NVS region [mem 0xdfee0000-0xdfee0fff] (4096 bytes) [ 0.276106] pinctrl core: initialized pinctrl subsystem [ 0.276169] regulator-dummy: no parameters [ 0.276199] RTC time: 13:00:37, date: 05/22/15 [ 0.276243] NET: Registered protocol family 16 [ 0.276396] cpuidle: using governor ladder [ 0.276398] cpuidle: using governor menu [ 0.276460] ACPI: bus type PCI registered [ 0.276462] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.276528] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.276530] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.276646] PCI: Using configuration type 1 for base access [ 0.281345] ACPI: Added _OSI(Module Device) [ 0.281347] ACPI: Added _OSI(Processor Device) [ 0.281348] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.281349] ACPI: Added _OSI(Processor Aggregator Device) [ 0.285687] ACPI: Interpreter enabled [ 0.285692] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580) [ 0.285695] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) [ 0.285706] ACPI: (supports S0 S3 S4 S5) [ 0.285707] ACPI: Using IOAPIC for interrupt routing [ 0.285724] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.289309] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.289314] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.289317] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.289490] PCI host bridge to bus 0000:00 [ 0.289493] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.289495] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.289496] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.289499] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.289501] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.289502] pci_bus 0000:00: root bus resource [mem 0xdff00000-0xfebfffff] [ 0.289513] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000 [ 0.289568] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.289635] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400 [ 0.289693] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.289758] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400 [ 0.289814] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.289879] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400 [ 0.289936] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.290005] pci 0000:00:10.0: [8086:3425] type 00 class 0x080000 [ 0.290097] pci 0000:00:10.1: [8086:3426] type 00 class 0x080000 [ 0.290180] pci 0000:00:11.0: [8086:3427] type 00 class 0x080000 [ 0.290269] pci 0000:00:11.1: [8086:3428] type 00 class 0x080000 [ 0.290352] pci 0000:00:13.0: [8086:342d] type 00 class 0x080020 [ 0.290363] pci 0000:00:13.0: reg 0x10: [mem 0xfbfff000-0xfbffffff] [ 0.290407] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 0.290466] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000 [ 0.290560] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000 [ 0.290653] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000 [ 0.290747] pci 0000:00:15.0: [8086:342f] type 00 class 0x080020 [ 0.290833] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 [ 0.290872] pci 0000:00:1a.0: reg 0x20: [io 0xff00-0xff1f] [ 0.290935] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.290970] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 [ 0.291008] pci 0000:00:1a.1: reg 0x20: [io 0xfe00-0xfe1f] [ 0.291070] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.291103] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 [ 0.291142] pci 0000:00:1a.2: reg 0x20: [io 0xfd00-0xfd1f] [ 0.291204] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.291246] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 [ 0.291265] pci 0000:00:1a.7: reg 0x10: [mem 0xfbffe000-0xfbffe3ff] [ 0.291349] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.291384] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.291423] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 [ 0.291438] pci 0000:00:1b.0: reg 0x10: [mem 0xfbff4000-0xfbff7fff 64bit] [ 0.291507] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.291542] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.291576] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 [ 0.291646] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.291682] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.291718] pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400 [ 0.291788] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.291824] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.291863] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 [ 0.291902] pci 0000:00:1d.0: reg 0x20: [io 0xfc00-0xfc1f] [ 0.291964] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.291997] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 [ 0.292035] pci 0000:00:1d.1: reg 0x20: [io 0xfb00-0xfb1f] [ 0.292098] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.292131] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 [ 0.292169] pci 0000:00:1d.2: reg 0x20: [io 0xfa00-0xfa1f] [ 0.292233] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.292275] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 [ 0.292294] pci 0000:00:1d.7: reg 0x10: [mem 0xfbffd000-0xfbffd3ff] [ 0.292377] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.292412] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.292446] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.292516] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.292552] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100 [ 0.292623] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0400-0x047f]: address conflict with ACPI CPU throttle [io 0x0410-0x0415] [ 0.292628] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.292631] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.292634] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.292721] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601 [ 0.292738] pci 0000:00:1f.2: reg 0x10: [io 0xf900-0xf907] [ 0.292745] pci 0000:00:1f.2: reg 0x14: [io 0xf800-0xf803] [ 0.292752] pci 0000:00:1f.2: reg 0x18: [io 0xf700-0xf707] [ 0.292759] pci 0000:00:1f.2: reg 0x1c: [io 0xf600-0xf603] [ 0.292766] pci 0000:00:1f.2: reg 0x20: [io 0xf500-0xf51f] [ 0.292773] pci 0000:00:1f.2: reg 0x24: [mem 0xfbffc000-0xfbffc7ff] [ 0.292815] pci 0000:00:1f.2: PME# supported from D3hot [ 0.292878] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 [ 0.292892] pci 0000:00:1f.3: reg 0x10: [mem 0xfbffb000-0xfbffb0ff 64bit] [ 0.292910] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f] [ 0.293023] pci 0000:01:00.0: [1b4b:9128] type 00 class 0x010601 [ 0.293035] pci 0000:01:00.0: reg 0x10: [io 0xdf00-0xdf07] [ 0.293042] pci 0000:01:00.0: reg 0x14: [io 0xde00-0xde03] [ 0.293048] pci 0000:01:00.0: reg 0x18: [io 0xdd00-0xdd07] [ 0.293055] pci 0000:01:00.0: reg 0x1c: [io 0xdc00-0xdc03] [ 0.293062] pci 0000:01:00.0: reg 0x20: [io 0xdb00-0xdb0f] [ 0.293069] pci 0000:01:00.0: reg 0x24: [mem 0xfbdff000-0xfbdff7ff] [ 0.293076] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.293107] pci 0000:01:00.0: PME# supported from D3hot [ 0.301174] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.301177] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.301180] pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.301239] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.301256] pci 0000:02:00.0: reg 0x10: [mem 0xfbefe000-0xfbefffff 64bit] [ 0.301337] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.309169] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.309173] pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.309227] pci 0000:03:00.0: [10de:0dc4] type 00 class 0x030000 [ 0.309237] pci 0000:03:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] [ 0.309247] pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref] [ 0.309256] pci 0000:03:00.0: reg 0x1c: [mem 0xec000000-0xedffffff 64bit pref] [ 0.309263] pci 0000:03:00.0: reg 0x24: [io 0xef00-0xef7f] [ 0.309269] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.309351] pci 0000:03:00.1: [10de:0be9] type 00 class 0x040300 [ 0.309361] pci 0000:03:00.1: reg 0x10: [mem 0xf9ffc000-0xf9ffffff] [ 0.317164] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.317167] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] [ 0.317170] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff] [ 0.317174] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.317241] pci 0000:04:00.0: [14e4:43a0] type 00 class 0x028000 [ 0.317264] pci 0000:04:00.0: reg 0x10: [mem 0xfbbf8000-0xfbbfffff 64bit] [ 0.317280] pci 0000:04:00.0: reg 0x18: [mem 0xfb800000-0xfb9fffff 64bit] [ 0.317394] pci 0000:04:00.0: supports D1 D2 [ 0.317395] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.325159] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.325164] pci 0000:00:1c.0: bridge window [mem 0xfb800000-0xfbbfffff] [ 0.325243] pci 0000:05:00.0: [197b:2363] type 00 class 0x010601 [ 0.325330] pci 0000:05:00.0: reg 0x24: [mem 0xfbcfe000-0xfbcfffff] [ 0.325343] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.325397] pci 0000:05:00.0: PME# supported from D3hot [ 0.325457] pci 0000:05:00.1: [197b:2363] type 00 class 0x010185 [ 0.325477] pci 0000:05:00.1: reg 0x10: [io 0xcf00-0xcf07] [ 0.325487] pci 0000:05:00.1: reg 0x14: [io 0xce00-0xce03] [ 0.325496] pci 0000:05:00.1: reg 0x18: [io 0xcd00-0xcd07] [ 0.325505] pci 0000:05:00.1: reg 0x1c: [io 0xcc00-0xcc03] [ 0.325515] pci 0000:05:00.1: reg 0x20: [io 0xcb00-0xcb0f] [ 0.325614] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.325623] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.325626] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.325629] pci 0000:00:1c.3: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.325697] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode) [ 0.325705] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.325707] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.325708] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.325710] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.325711] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode) [ 0.326094] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.326137] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) [ 0.326179] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.326220] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.326261] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.326303] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 14 15) [ 0.326345] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.326386] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.326535] vgaarb: setting as boot device: PCI:0000:03:00.0 [ 0.326537] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.326539] vgaarb: loaded [ 0.326540] vgaarb: bridge control possible 0000:03:00.0 [ 0.326741] SCSI subsystem initialized [ 0.326777] libata version 3.00 loaded. [ 0.326801] ACPI: bus type USB registered [ 0.326816] usbcore: registered new interface driver usbfs [ 0.326824] usbcore: registered new interface driver hub [ 0.326839] usbcore: registered new device driver usb [ 0.326954] PCI: Using ACPI for IRQ routing [ 0.328226] PCI: Discovered peer bus 3f [ 0.328227] PCI: root bus 3f: using default resources [ 0.328228] PCI: Probing PCI hardware (bus 3f) [ 0.328250] PCI host bridge to bus 0000:3f [ 0.328252] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff] [ 0.328254] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff] [ 0.328255] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff] [ 0.328257] pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f]) [ 0.328262] pci 0000:3f:00.0: [8086:2c41] type 00 class 0x060000 [ 0.328299] pci 0000:3f:00.1: [8086:2c01] type 00 class 0x060000 [ 0.328336] pci 0000:3f:02.0: [8086:2c10] type 00 class 0x060000 [ 0.328371] pci 0000:3f:02.1: [8086:2c11] type 00 class 0x060000 [ 0.328407] pci 0000:3f:03.0: [8086:2c18] type 00 class 0x060000 [ 0.328442] pci 0000:3f:03.1: [8086:2c19] type 00 class 0x060000 [ 0.328477] pci 0000:3f:03.4: [8086:2c1c] type 00 class 0x060000 [ 0.328513] pci 0000:3f:04.0: [8086:2c20] type 00 class 0x060000 [ 0.328547] pci 0000:3f:04.1: [8086:2c21] type 00 class 0x060000 [ 0.328582] pci 0000:3f:04.2: [8086:2c22] type 00 class 0x060000 [ 0.328616] pci 0000:3f:04.3: [8086:2c23] type 00 class 0x060000 [ 0.328652] pci 0000:3f:05.0: [8086:2c28] type 00 class 0x060000 [ 0.328686] pci 0000:3f:05.1: [8086:2c29] type 00 class 0x060000 [ 0.328721] pci 0000:3f:05.2: [8086:2c2a] type 00 class 0x060000 [ 0.328756] pci 0000:3f:05.3: [8086:2c2b] type 00 class 0x060000 [ 0.328794] pci 0000:3f:06.0: [8086:2c30] type 00 class 0x060000 [ 0.328829] pci 0000:3f:06.1: [8086:2c31] type 00 class 0x060000 [ 0.328864] pci 0000:3f:06.2: [8086:2c32] type 00 class 0x060000 [ 0.328898] pci 0000:3f:06.3: [8086:2c33] type 00 class 0x060000 [ 0.328942] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f [ 0.328945] pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f]) [ 0.328948] PCI: pci_cache_line_size set to 64 bytes [ 0.329029] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.329030] e820: reserve RAM buffer [mem 0xdfee0000-0xdfffffff] [ 0.329120] NetLabel: Initializing [ 0.329121] NetLabel: domain hash size = 128 [ 0.329122] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.329132] NetLabel: unlabeled traffic allowed by default [ 0.329203] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.329207] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.329210] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.331415] Switched to clocksource hpet [ 0.336070] AppArmor: AppArmor Filesystem Enabled [ 0.336096] pnp: PnP ACPI init [ 0.336108] ACPI: bus type PNP registered [ 0.336248] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.336250] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.336252] system 00:00: [io 0x0800-0x087f] has been reserved [ 0.336253] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.336255] system 00:00: [io 0x0880-0x088f] has been reserved [ 0.336258] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.336314] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.336438] system 00:02: [io 0x0400-0x04cf] could not be reserved [ 0.336441] system 00:02: [io 0x04d2-0x04ff] has been reserved [ 0.336443] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.336601] system 00:03: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.336603] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.336759] system 00:04: [mem 0x000d2a00-0x000d3fff] has been reserved [ 0.336762] system 00:04: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.336764] system 00:04: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.336765] system 00:04: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.336767] system 00:04: [mem 0xdfee0000-0xdfeeffff] could not be reserved [ 0.336769] system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.336771] system 00:04: [mem 0x00100000-0xdfedffff] could not be reserved [ 0.336773] system 00:04: [mem 0xdfef0000-0xdfefffff] has been reserved [ 0.336775] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.336777] system 00:04: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.336778] system 00:04: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.336780] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.336782] system 00:04: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.336783] system 00:04: [mem 0xfff00000-0xffffffff] has been reserved [ 0.336785] system 00:04: [mem 0x000e0000-0x000effff] has been reserved [ 0.336787] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.336792] pnp: PnP ACPI: found 5 devices [ 0.336793] ACPI: bus type PNP unregistered [ 0.342976] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.342979] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 [ 0.342986] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 [ 0.343001] pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment [ 0.343004] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.343005] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.343007] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.343013] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4000000-0xf41fffff 64bit pref] [ 0.343017] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf4200000-0xf43fffff 64bit pref] [ 0.343019] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.343022] pci 0000:01:00.0: BAR 6: assigned [mem 0xfbd00000-0xfbd0ffff pref] [ 0.343023] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.343026] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.343029] pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.343035] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.343038] pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.343044] pci 0000:03:00.0: BAR 6: assigned [mem 0xf7000000-0xf707ffff pref] [ 0.343046] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.343048] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] [ 0.343051] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff] [ 0.343054] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.343058] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.343061] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.343064] pci 0000:00:1c.0: bridge window [mem 0xfb800000-0xfbbfffff] [ 0.343067] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf41fffff 64bit pref] [ 0.343073] pci 0000:05:00.0: BAR 6: assigned [mem 0xfbc00000-0xfbc0ffff pref] [ 0.343074] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.343076] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.343080] pci 0000:00:1c.3: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.343083] pci 0000:00:1c.3: bridge window [mem 0xf4200000-0xf43fffff 64bit pref] [ 0.343088] pci 0000:00:1e.0: PCI bridge to [bus 06] [ 0.343097] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.343099] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.343100] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.343102] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.343103] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff] [ 0.343105] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.343106] pci_bus 0000:01: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.343108] pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.343110] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.343111] pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf9ffffff] [ 0.343113] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.343114] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 0.343116] pci_bus 0000:04: resource 1 [mem 0xfb800000-0xfbbfffff] [ 0.343117] pci_bus 0000:04: resource 2 [mem 0xf4000000-0xf41fffff 64bit pref] [ 0.343119] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.343121] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 0.343122] pci_bus 0000:05: resource 2 [mem 0xf4200000-0xf43fffff 64bit pref] [ 0.343124] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7] [ 0.343125] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff] [ 0.343127] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff] [ 0.343128] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff] [ 0.343130] pci_bus 0000:06: resource 8 [mem 0xdff00000-0xfebfffff] [ 0.343132] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff] [ 0.343134] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff] [ 0.343156] NET: Registered protocol family 2 [ 0.343366] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.343624] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.343740] TCP: Hash tables configured (established 131072 bind 65536) [ 0.343758] TCP: reno registered [ 0.343774] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.343827] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.343908] NET: Registered protocol family 1 [ 0.375661] pci 0000:03:00.0: Video device with shadowed ROM [ 0.375695] PCI: CLS 64 bytes, default 64 [ 0.375737] Trying to unpack rootfs image as initramfs... [ 0.837380] Freeing initrd memory: 32048K (ffff880034158000 - ffff8800360a4000) [ 0.837409] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.837411] software IO TLB [mem 0xdbee0000-0xdfee0000] (64MB) mapped at [ffff8800dbee0000-ffff8800dfedffff] [ 0.837753] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x19 [ 0.837758] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x19 [ 0.837764] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x19 [ 0.837769] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x19 [ 0.837775] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x19 [ 0.837781] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x19 [ 0.837786] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x19 [ 0.837791] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x19 [ 0.837836] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.837857] Scanning for low memory corruption every 60 seconds [ 0.838241] futex hash table entries: 4096 (order: 6, 262144 bytes) [ 0.838279] Initialise system trusted keyring [ 0.838300] audit: initializing netlink subsys (disabled) [ 0.838313] audit: type=2000 audit(1432299637.736:1): initialized [ 0.838591] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.839918] zpool: loaded [ 0.839921] zbud: loaded [ 0.840058] VFS: Disk quotas dquot_6.5.2 [ 0.840094] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.840520] fuse init (API version 7.23) [ 0.840595] msgmni has been set to 23768 [ 0.840653] Key type big_key registered [ 0.840923] Key type asymmetric registered [ 0.840925] Asymmetric key parser 'x509' registered [ 0.840957] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.841005] io scheduler noop registered [ 0.841007] io scheduler deadline registered (default) [ 0.841050] io scheduler cfq registered [ 0.841395] pcieport 0000:00:1c.0: enabling device (0006 -> 0007) [ 0.841473] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.841603] pcieport 0000:00:1c.3: irq 41 for MSI/MSI-X [ 0.841680] ioapic: probe of 0000:00:13.0 failed with error -22 [ 0.841685] ioapic: probe of 0000:00:15.0 failed with error -22 [ 0.841694] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.841706] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.841750] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 0.841752] vesafb: scrolling: redraw [ 0.841753] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.841770] vesafb: framebuffer at 0xed000000, mapped to 0xffffc90005c00000, using 5120k, total 5120k [ 0.841844] Console: switching to colour frame buffer device 160x64 [ 0.841875] fb0: VESA VGA frame buffer device [ 0.841894] intel_idle: MWAIT substates: 0x1120 [ 0.841905] intel_idle: v0.4 model 0x1A [ 0.841906] intel_idle: lapic_timer_reliable_states 0x2 [ 0.842217] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.842220] ACPI: Power Button [PWRB] [ 0.842257] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.842259] ACPI: Power Button [PWRF] [ 0.843260] GHES: HEST is not enabled! [ 0.843339] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.844660] Linux agpgart interface v0.103 [ 0.845817] brd: module loaded [ 0.846394] loop: module loaded [ 0.846621] libphy: Fixed MDIO Bus: probed [ 0.846625] tun: Universal TUN/TAP device driver, 1.6 [ 0.846626] tun: (C) 1999-2004 Max Krasnyansky [ 0.846662] PPP generic driver version 2.4.2 [ 0.846697] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.846702] ehci-pci: EHCI PCI platform driver [ 0.846801] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.846807] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.846819] ehci-pci 0000:00:1a.7: debug port 1 [ 0.850719] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 0.850736] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbffe000 [ 0.859048] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.859094] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.859096] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.859098] usb usb1: Product: EHCI Host Controller [ 0.859099] usb usb1: Manufacturer: Linux 3.16.0-37-generic ehci_hcd [ 0.859100] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.859204] hub 1-0:1.0: USB hub found [ 0.859210] hub 1-0:1.0: 6 ports detected [ 0.859410] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.859415] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.859425] ehci-pci 0000:00:1d.7: debug port 1 [ 0.863315] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.863332] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbffd000 [ 0.875101] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.875134] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.875136] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.875137] usb usb2: Product: EHCI Host Controller [ 0.875139] usb usb2: Manufacturer: Linux 3.16.0-37-generic ehci_hcd [ 0.875140] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.875228] hub 2-0:1.0: USB hub found [ 0.875233] hub 2-0:1.0: 6 ports detected [ 0.875353] ehci-platform: EHCI generic platform driver [ 0.875360] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.875364] ohci-pci: OHCI PCI platform driver [ 0.875374] ohci-platform: OHCI generic platform driver [ 0.875381] uhci_hcd: USB Universal Host Controller Interface driver [ 0.875465] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.875469] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.875475] uhci_hcd 0000:00:1a.0: detected 2 ports [ 0.875499] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 [ 0.875533] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.875535] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.875536] usb usb3: Product: UHCI Host Controller [ 0.875538] usb usb3: Manufacturer: Linux 3.16.0-37-generic uhci_hcd [ 0.875539] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.875721] hub 3-0:1.0: USB hub found [ 0.875727] hub 3-0:1.0: 2 ports detected [ 0.875871] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.875876] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.875882] uhci_hcd 0000:00:1a.1: detected 2 ports [ 0.875906] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 [ 0.875941] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.875942] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.875944] usb usb4: Product: UHCI Host Controller [ 0.875945] usb usb4: Manufacturer: Linux 3.16.0-37-generic uhci_hcd [ 0.875947] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.876124] hub 4-0:1.0: USB hub found [ 0.876130] hub 4-0:1.0: 2 ports detected [ 0.876272] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.876277] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.876282] uhci_hcd 0000:00:1a.2: detected 2 ports [ 0.876301] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00 [ 0.876336] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.876338] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.876340] usb usb5: Product: UHCI Host Controller [ 0.876341] usb usb5: Manufacturer: Linux 3.16.0-37-generic uhci_hcd [ 0.876343] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.876523] hub 5-0:1.0: USB hub found [ 0.876529] hub 5-0:1.0: 2 ports detected [ 0.876673] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.876677] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.876682] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.876699] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 [ 0.876733] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.876735] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.876736] usb usb6: Product: UHCI Host Controller [ 0.876738] usb usb6: Manufacturer: Linux 3.16.0-37-generic uhci_hcd [ 0.876739] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.876915] hub 6-0:1.0: USB hub found [ 0.876922] hub 6-0:1.0: 2 ports detected [ 0.877066] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.877071] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.877076] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.877100] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 [ 0.877133] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.877135] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.877136] usb usb7: Product: UHCI Host Controller [ 0.877138] usb usb7: Manufacturer: Linux 3.16.0-37-generic uhci_hcd [ 0.877139] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.877318] hub 7-0:1.0: USB hub found [ 0.877324] hub 7-0:1.0: 2 ports detected [ 0.877466] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.877471] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.877476] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.877492] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 [ 0.877526] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.877528] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.877529] usb usb8: Product: UHCI Host Controller [ 0.877530] usb usb8: Manufacturer: Linux 3.16.0-37-generic uhci_hcd [ 0.877532] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.877704] hub 8-0:1.0: USB hub found [ 0.877711] hub 8-0:1.0: 2 ports detected [ 0.877872] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.877876] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 0.877995] xhci_hcd 0000:02:00.0: irq 42 for MSI/MSI-X [ 0.877999] xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X [ 0.878003] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X [ 0.878007] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X [ 0.878010] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X [ 0.878014] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X [ 0.878018] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X [ 0.878022] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X [ 0.878120] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.878122] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.878124] usb usb9: Product: xHCI Host Controller [ 0.878125] usb usb9: Manufacturer: Linux 3.16.0-37-generic xhci_hcd [ 0.878127] usb usb9: SerialNumber: 0000:02:00.0 [ 0.878295] hub 9-0:1.0: USB hub found [ 0.878303] hub 9-0:1.0: 2 ports detected [ 0.878374] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.878377] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 10 [ 0.881369] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.881371] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.881373] usb usb10: Product: xHCI Host Controller [ 0.881374] usb usb10: Manufacturer: Linux 3.16.0-37-generic xhci_hcd [ 0.881376] usb usb10: SerialNumber: 0000:02:00.0 [ 0.881499] hub 10-0:1.0: USB hub found [ 0.881510] hub 10-0:1.0: 2 ports detected [ 0.881624] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.881984] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.881988] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.882209] mousedev: PS/2 mouse device common for all mice [ 0.882506] rtc_cmos 00:01: RTC can wake from S4 [ 0.882650] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.882673] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.882726] device-mapper: uevent: version 1.0.3 [ 0.882848] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 0.882865] ledtrig-cpu: registered to indicate activity on CPUs [ 0.882951] TCP: cubic registered [ 0.882962] IPv6: Loaded, but administratively disabled, reboot required to enable [ 0.882965] NET: Registered protocol family 17 [ 0.882977] Key type dns_resolver registered [ 0.883439] Loading compiled-in X.509 certificates [ 0.884372] Loaded X.509 cert 'Magrathea: Glacier signing key: bc5ddea14b638acdbbea44ffe74e821062411d12' [ 0.884386] registered taskstats version 1 [ 0.886741] Key type trusted registered [ 0.892304] Key type encrypted registered [ 0.892311] AppArmor: AppArmor sha1 policy hashing enabled [ 0.892313] ima: No TPM chip found, activating TPM-bypass! [ 0.892332] evm: HMAC attrs: 0x1 [ 0.892988] Magic number: 15:984:28 [ 0.893045] memory memory68: hash matches [ 0.893228] rtc_cmos 00:01: setting system clock to 2015-05-22 13:00:38 UTC (1432299638) [ 0.894700] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.894702] EDD information not available. [ 0.894747] PM: Hibernation image not present or could not be loaded. [ 0.895634] Freeing unused kernel memory: 1360K (ffffffff81d2d000 - ffffffff81e81000) [ 0.895636] Write protecting the kernel read-only data: 12288k [ 0.897323] Freeing unused kernel memory: 428K (ffff880001795000 - ffff880001800000) [ 0.898634] Freeing unused kernel memory: 484K (ffff880001b87000 - ffff880001c00000) [ 0.912710] random: systemd-udevd urandom read with 1 bits of entropy available [ 0.929829] pata_jmicron 0000:05:00.1: enabling device (0000 -> 0001) [ 0.929910] ahci 0000:00:1f.2: version 3.0 [ 0.930047] ahci 0000:00:1f.2: irq 50 for MSI/MSI-X [ 0.930072] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.930114] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.930118] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems [ 0.930574] scsi0 : pata_jmicron [ 0.930745] scsi1 : pata_jmicron [ 0.930788] ata1: PATA max UDMA/100 cmd 0xcf00 ctl 0xce00 bmdma 0xcb00 irq 16 [ 0.930790] ata2: PATA max UDMA/100 cmd 0xcd00 ctl 0xcc00 bmdma 0xcb08 irq 16 [ 0.937884] cfg80211: Calling CRDA to update world regulatory domain [ 0.937896] cfg80211: Calling CRDA to update world regulatory domain [ 0.940239] wl: module license 'MIXED/Proprietary' taints kernel. [ 0.940242] Disabling lock debugging due to kernel taint [ 0.942706] wl: module verification failed: signature and/or required key missing - tainting kernel [ 0.967743] scsi2 : ahci [ 0.967998] scsi3 : ahci [ 0.968296] scsi4 : ahci [ 0.968580] scsi5 : ahci [ 0.968796] scsi6 : ahci [ 0.968989] scsi7 : ahci [ 0.969056] ata3: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 50 [ 0.969059] ata4: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 50 [ 0.969062] ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 50 [ 0.969064] ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 50 [ 0.969067] ata7: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 50 [ 0.969069] ata8: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 50 [ 0.969215] ahci 0000:01:00.0: irq 51 for MSI/MSI-X [ 0.983005] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 0.983008] ahci 0000:01:00.0: flags: 64bit ncq pio [ 0.984113] scsi8 : ahci [ 0.984278] scsi9 : ahci [ 0.984433] scsi10 : ahci [ 0.984589] scsi11 : ahci [ 0.984713] scsi12 : ahci [ 0.984840] scsi13 : ahci [ 0.984964] scsi14 : ahci [ 0.985090] scsi15 : ahci [ 0.985150] ata9: SATA max UDMA/133 abar m2048@0xfbdff000 port 0xfbdff100 irq 51 [ 0.985154] ata10: SATA max UDMA/133 abar m2048@0xfbdff000 port 0xfbdff180 irq 51 [ 0.985156] ata11: SATA max UDMA/133 abar m2048@0xfbdff000 port 0xfbdff200 irq 51 [ 0.985159] ata12: SATA max UDMA/133 abar m2048@0xfbdff000 port 0xfbdff280 irq 51 [ 0.985161] ata13: SATA max UDMA/133 abar m2048@0xfbdff000 port 0xfbdff300 irq 51 [ 0.985164] ata14: SATA max UDMA/133 abar m2048@0xfbdff000 port 0xfbdff380 irq 51 [ 0.985166] ata15: SATA max UDMA/133 abar m2048@0xfbdff000 port 0xfbdff400 irq 51 [ 0.985168] ata16: SATA max UDMA/133 abar m2048@0xfbdff000 port 0xfbdff480 irq 51 [ 0.998991] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 0.998994] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 0.999340] scsi16 : ahci [ 0.999455] scsi17 : ahci [ 0.999515] ata17: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 19 [ 0.999520] ata18: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 19 [ 1.112756] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574) [ 1.303035] ata15: SATA link down (SStatus 0 SControl 300) [ 1.303053] ata12: SATA link down (SStatus 0 SControl 300) [ 1.303071] ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.303090] ata11: SATA link down (SStatus 0 SControl 300) [ 1.303107] ata14: SATA link down (SStatus 0 SControl 300) [ 1.303124] ata13: SATA link down (SStatus 0 SControl 300) [ 1.303243] ata16.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 [ 1.303497] ata16.00: configured for UDMA/66 [ 1.310958] ata10: SATA link down (SStatus 0 SControl 300) [ 1.310985] ata9: SATA link down (SStatus 0 SControl 300) [ 1.319022] ata18: SATA link down (SStatus 0 SControl 300) [ 1.319086] ata17: SATA link down (SStatus 0 SControl 300) [ 1.458651] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.461089] ata3.00: ATAPI: ATAPI iHES108 2, 7L05, max UDMA/100 [ 1.463040] ata3.00: configured for UDMA/100 [ 1.466070] scsi 2:0:0:0: CD-ROM ATAPI iHES108 2 7L05 PQ: 0 ANSI: 5 [ 1.491248] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.491252] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.491578] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.491649] sr 2:0:0:0: Attached scsi generic sg0 type 5 [ 1.674648] usb 3-2: new full-speed USB device number 2 using uhci_hcd [ 1.810496] ata4: SATA link down (SStatus 0 SControl 300) [ 1.834383] tsc: Refined TSC clocksource calibration: 2664.772 MHz [ 1.842910] usb 3-2: New USB device found, idVendor=04a9, idProduct=220d [ 1.842915] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.842918] usb 3-2: Product: CanoScan [ 1.842920] usb 3-2: Manufacturer: Canon [ 2.082428] usb 4-1: new low-speed USB device number 2 using uhci_hcd [ 2.265009] usb 4-1: New USB device found, idVendor=046d, idProduct=c313 [ 2.265014] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.265017] usb 4-1: Product: USB Multimedia Keyboard [ 2.265020] usb 4-1: Manufacturer: LITEON Technology [ 2.271454] hidraw: raw HID events driver (C) Jiri Kosina [ 2.300059] usbcore: registered new interface driver usbhid [ 2.300061] usbhid: USB HID core driver [ 2.301766] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:046D:C313.0001/input/input5 [ 2.301842] hid-generic 0003:046D:C313.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1a.1-1/input0 [ 2.302041] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.304796] ata5.00: ATA-8: WDC WD1001FALS-00E3A0, 05.01D05, max UDMA/133 [ 2.304798] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.307061] ata5.00: configured for UDMA/133 [ 2.307115] scsi 4:0:0:0: Direct-Access ATA WDC WD1001FALS-0 1D05 PQ: 0 ANSI: 5 [ 2.307296] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.307306] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 2.307438] sd 4:0:0:0: [sda] Write Protect is off [ 2.307441] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.307547] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.308008] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/0003:046D:C313.0002/input/input6 [ 2.308224] hid-generic 0003:046D:C313.0002: input,hidraw1: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1a.1-1/input1 [ 2.327918] sda: sda1 sda2 < sda5 > [ 2.328797] sd 4:0:0:0: [sda] Attached SCSI disk [ 2.505985] usb 4-2: new low-speed USB device number 3 using uhci_hcd [ 2.682659] usb 4-2: New USB device found, idVendor=046d, idProduct=c03e [ 2.682664] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.682667] usb 4-2: Product: USB-PS/2 Optical Mouse [ 2.682669] usb 4-2: Manufacturer: Logitech [ 2.698798] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/0003:046D:C03E.0003/input/input7 [ 2.698926] hid-generic 0003:046D:C03E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.1-2/input0 [ 2.797714] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.800371] ata6.00: ATA-8: WDC WD1001FALS-00E3A0, 05.01D05, max UDMA/133 [ 2.800375] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.802594] ata6.00: configured for UDMA/133 [ 2.802884] scsi 5:0:0:0: Direct-Access ATA WDC WD1001FALS-0 1D05 PQ: 0 ANSI: 5 [ 2.803302] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 2.803309] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.803533] sd 5:0:0:0: [sdb] Write Protect is off [ 2.803535] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.803616] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.816730] sdb: sdb1 [ 2.817296] sd 5:0:0:0: [sdb] Attached SCSI disk [ 2.833853] Switched to clocksource tsc [ 3.293352] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.294156] ata7.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 [ 3.294160] ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.295034] ata7.00: configured for UDMA/133 [ 3.295281] scsi 6:0:0:0: Direct-Access ATA WDC WD10EADS-00L 1A01 PQ: 0 ANSI: 5 [ 3.295632] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.295664] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 3.295715] sd 6:0:0:0: [sdc] Write Protect is off [ 3.295717] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.295745] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.310529] sdc: unknown partition table [ 3.310961] sd 6:0:0:0: [sdc] Attached SCSI disk [ 3.613179] ata8: SATA link down (SStatus 0 SControl 300) [ 3.613533] scsi 15:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5 [ 3.629257] ata16.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 3.629260] ata16.00: irq_stat 0x40000001 [ 3.629263] scsi 15:0:0:0: CDB: [ 3.629264] Inquiry: 12 01 00 00 ff 00 [ 3.629270] ata16.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma 16640 in res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation) [ 3.629273] ata16: hard resetting link [ 3.818589] random: nonblocking pool is initialized [ 3.941004] floppy0: no floppy controllers found [ 3.941015] work still pending [ 3.956855] ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.957080] ata16.00: configured for UDMA/66 [ 3.957133] ata16: EH complete [ 3.957238] scsi 15:0:0:0: Attached scsi generic sg4 type 3 [ 9.237648] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 9.239116] XFS (dm-0): Mounting V4 Filesystem [ 9.317762] XFS (dm-0): Ending clean mount [ 9.822833] systemd[1]: Inserted module 'autofs4' [ 9.824521] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 9.824695] systemd[1]: Detected architecture x86-64. [ 9.834369] systemd[1]: Set hostname to . [ 9.836410] systemd[1]: /usr appears to be on its own filesystem and is not already mounted. This is not a supported setup. Some things will probably break (sometimes even silently) in mysterious ways. Consult http://freedesktop.org/wiki/Software/systemd/separate-usr-is-broken for more information. [ 10.406449] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 10.406462] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 10.406506] systemd[1]: Reached target Swap. [ 10.406513] systemd[1]: Starting Swap. [ 10.406574] systemd[1]: Created slice Root Slice. [ 10.406582] systemd[1]: Starting Root Slice. [ 10.406644] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 10.406652] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 10.406760] systemd[1]: Created slice User and Session Slice. [ 10.406767] systemd[1]: Starting User and Session Slice. [ 10.406822] systemd[1]: Listening on fsck to fsckd communication Socket. [ 10.406831] systemd[1]: Starting fsck to fsckd communication Socket. [ 10.406886] systemd[1]: Listening on Journal Audit Socket. [ 10.406894] systemd[1]: Starting Journal Audit Socket. [ 10.407002] systemd[1]: Created slice System Slice. [ 10.407017] systemd[1]: Starting System Slice. [ 10.407453] systemd[1]: Starting Increase datagram queue length... [ 10.407641] systemd[1]: Created slice system-getty.slice. [ 10.407654] systemd[1]: Starting system-getty.slice. [ 10.407733] systemd[1]: Listening on LVM2 metadata daemon socket. [ 10.407744] systemd[1]: Starting LVM2 metadata daemon socket. [ 10.407801] systemd[1]: Reached target User and Group Name Lookups. [ 10.407812] systemd[1]: Starting User and Group Name Lookups. [ 10.407872] systemd[1]: Listening on Delayed Shutdown Socket. [ 10.407879] systemd[1]: Starting Delayed Shutdown Socket. [ 10.407952] systemd[1]: Listening on Journal Socket (/dev/log). [ 10.407961] systemd[1]: Starting Journal Socket (/dev/log). [ 10.408019] systemd[1]: Reached target Remote File Systems (Pre). [ 10.408026] systemd[1]: Starting Remote File Systems (Pre). [ 10.408068] systemd[1]: Reached target Slices. [ 10.408075] systemd[1]: Starting Slices. [ 10.408116] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 10.408123] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 10.408189] systemd[1]: Listening on udev Control Socket. [ 10.408197] systemd[1]: Starting udev Control Socket. [ 10.408265] systemd[1]: Listening on udev Kernel Socket. [ 10.408277] systemd[1]: Starting udev Kernel Socket. [ 10.408327] systemd[1]: Reached target Encrypted Volumes. [ 10.408335] systemd[1]: Starting Encrypted Volumes. [ 10.408456] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 10.408465] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 10.408540] systemd[1]: Listening on Journal Socket. [ 10.408555] systemd[1]: Starting Journal Socket. [ 10.409030] systemd[1]: Started Braille Device Support. [ 10.409441] systemd[1]: Starting Braille Device Support... [ 10.409953] systemd[1]: Mounting Debug File System... [ 10.410635] systemd[1]: Mounting Huge Pages File System... [ 10.411134] systemd[1]: Starting udev Coldplug all Devices... [ 10.411603] systemd[1]: Starting LSB: controls configuration of serial ports... [ 10.411708] systemd[1]: Started Set Up Additional Binary Formats. [ 10.412155] systemd[1]: Starting Nameserver information manager... [ 10.412643] systemd[1]: Starting Setup Virtual Console... [ 10.413124] systemd[1]: Mounting POSIX Message Queue File System... [ 10.413866] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 10.414907] systemd[1]: Starting Load Kernel Modules... [ 10.415738] systemd[1]: Started Increase datagram queue length. [ 10.415986] systemd[1]: Listening on Syslog Socket. [ 10.415999] systemd[1]: Starting Syslog Socket. [ 10.416435] systemd[1]: Starting Journal Service... [ 10.426709] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 10.427349] systemd[1]: Starting Create Static Device Nodes in /dev... [ 10.470373] systemd[1]: Started Nameserver information manager. [ 10.502205] systemd[1]: Mounted Huge Pages File System. [ 10.502445] systemd[1]: Mounted POSIX Message Queue File System. [ 10.502667] systemd[1]: Mounted Debug File System. [ 10.534366] systemd[1]: Started Setup Virtual Console. [ 10.569157] systemd[1]: Started Create Static Device Nodes in /dev. [ 10.569925] systemd[1]: Starting udev Kernel Device Manager... [ 10.571239] systemd[1]: Started LSB: controls configuration of serial ports. [ 10.602204] systemd[1]: Started udev Coldplug all Devices. [ 10.602821] systemd[1]: Starting udev Wait for Complete Device Initialization... [ 10.753703] lp: driver loaded but no devices found [ 10.756425] ppdev: user-space parallel port driver [ 10.820823] systemd[1]: Started Journal Service. [ 10.872503] it87: Found IT8720F chip at 0x290, revision 8 [ 10.872510] it87: VID is disabled (pins used for GPIO) [ 10.872519] it87: Routing internal VCCH to in7 [ 10.872523] it87: Beeping is supported [ 11.438373] EDAC MC: Ver: 3.0.0 [ 11.441553] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED) [ 11.441589] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED) [ 11.441593] EDAC i7core: Driver loaded, 1 memory controller(s) found. [ 11.510842] wmi: Mapper loaded [ 11.561342] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.575797] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 11.721636] cfg80211: Calling CRDA to update world regulatory domain [ 12.208954] [drm] Initialized drm 1.1.0 20060810 [ 12.413863] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X [ 12.413979] snd_hda_intel 0000:03:00.1: Disabling MSI [ 12.413988] snd_hda_intel 0000:03:00.1: Handle VGA-switcheroo audio client [ 12.452076] sound hdaudioC0D2: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 12.452079] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 12.452081] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 12.452083] sound hdaudioC0D2: mono: mono_out=0x0 [ 12.452084] sound hdaudioC0D2: dig-out=0x11/0x1e [ 12.452085] sound hdaudioC0D2: inputs: [ 12.452087] sound hdaudioC0D2: Front Mic=0x19 [ 12.452089] sound hdaudioC0D2: Rear Mic=0x18 [ 12.452091] sound hdaudioC0D2: Line=0x1a [ 12.452092] sound hdaudioC0D2: dig-in=0x1f [ 12.455057] cfg80211: World regulatory domain updated: [ 12.455060] cfg80211: DFS Master region: unset [ 12.455062] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 12.455066] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 12.455068] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 12.455071] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 12.455074] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 12.455077] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 12.455087] cfg80211: Calling CRDA for country: #A [ 12.464568] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 12.464625] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 12.464678] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 12.464758] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 12.464859] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 12.464967] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 12.465061] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 12.465178] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 13.187244] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16 [ 13.187302] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input17 [ 13.187372] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input18 [ 13.187444] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input19 [ 14.481674] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=none [ 14.482061] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:03:00.0 on minor 0 [ 14.482073] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 349.16 Wed Apr 8 00:17:22 PDT 2015 [ 14.637353] floppy0: no floppy controllers found [ 15.604638] ------------[ cut here ]------------ [ 15.604659] WARNING: CPU: 2 PID: 238 at /build/buildd/linux-3.16.0/net/wireless/reg.c:411 restore_regulatory_settings+0x9a/0x410 [cfg80211]() [ 15.604660] Unexpected user alpha2: #A [ 15.604661] Modules linked in: nvidia(POE) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm drm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer mxm_wmi snd soundcore kvm_intel shpchp serio_raw kvm wmi i7core_edac edac_core mac_hid cuse it87 hwmon_vid coretemp parport_pc ppdev lp parport autofs4 xfs libcrc32c pata_acpi hid_generic usbhid hid wl(POE) cfg80211 psmouse pata_jmicron ahci libahci [ 15.604681] CPU: 2 PID: 238 Comm: kworker/u32:17 Tainted: P OE 3.16.0-37-generic #51-Ubuntu [ 15.604682] Hardware name: Gigabyte Technology Co., Ltd. X58A-UD3R/X58A-UD3R, BIOS F8b 10/07/2011 [ 15.604690] Workqueue: events_power_efficient reg_timeout_work [cfg80211] [ 15.604692] 0000000000000009 ffff88030869fd20 ffffffff81784a0e ffff88030869fd68 [ 15.604693] ffff88030869fd58 ffffffff8106fefd 0000000000000023 ffff88030869fdd0 [ 15.604695] ffff880313011800 0000000000000001 0000000000000400 ffff88030869fdb8 [ 15.604697] Call Trace: [ 15.604701] [] dump_stack+0x45/0x56 [ 15.604705] [] warn_slowpath_common+0x7d/0xa0 [ 15.604707] [] warn_slowpath_fmt+0x4c/0x50 [ 15.604715] [] ? reg_free_last_request+0x25/0x30 [cfg80211] [ 15.604722] [] restore_regulatory_settings+0x9a/0x410 [cfg80211] [ 15.604730] [] reg_timeout_work+0x18/0x20 [cfg80211] [ 15.604732] [] process_one_work+0x182/0x4e0 [ 15.604734] [] worker_thread+0x6b/0x660 [ 15.604737] [] ? __schedule+0x39d/0x890 [ 15.604739] [] ? flush_delayed_work+0x50/0x50 [ 15.604742] [] kthread+0xdb/0x100 [ 15.604744] [] ? kthread_create_on_node+0x1c0/0x1c0 [ 15.604746] [] ret_from_fork+0x58/0x90 [ 15.604748] [] ? kthread_create_on_node+0x1c0/0x1c0 [ 15.604750] ---[ end trace 6fb1575c66ae1a09 ]--- [ 15.604757] cfg80211: Calling CRDA to update world regulatory domain [ 15.606421] cfg80211: World regulatory domain updated: [ 15.606424] cfg80211: DFS Master region: unset [ 15.606425] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 15.606427] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 15.606429] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 15.606431] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 15.606432] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 15.606434] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 15.606442] cfg80211: Calling CRDA for country: CH [ 15.609338] cfg80211: Regulatory domain changed to country: CH [ 15.609340] cfg80211: DFS Master region: ETSI [ 15.609341] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 15.609343] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 15.609345] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 15.609347] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s) [ 15.609348] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s) [ 15.609350] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 15.961154] XFS (dm-6): Mounting V4 Filesystem [ 15.969870] XFS (dm-3): Mounting V4 Filesystem [ 15.978774] XFS (dm-2): Mounting V4 Filesystem [ 16.041229] XFS (dm-14): Mounting V4 Filesystem [ 16.048874] XFS (dm-11): Mounting V4 Filesystem [ 16.080400] XFS (dm-1): Mounting V4 Filesystem [ 16.146224] XFS (dm-4): Mounting V4 Filesystem [ 16.171159] XFS (dm-5): Mounting V4 Filesystem [ 16.171713] XFS (dm-7): Mounting V4 Filesystem [ 16.171820] XFS (dm-8): Mounting V4 Filesystem [ 16.185589] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 16.193835] XFS (dm-12): Mounting V4 Filesystem [ 16.201089] XFS (dm-13): Mounting V4 Filesystem [ 16.936067] XFS (dm-11): Ending clean mount [ 16.940660] XFS (dm-2): Ending clean mount [ 17.137492] XFS (dm-12): Ending clean mount [ 17.193603] XFS (dm-13): Ending clean mount [ 17.200849] XFS (dm-14): Ending clean mount [ 17.209923] XFS (dm-5): Ending clean mount [ 17.294222] XFS (dm-4): Ending clean mount [ 17.518431] XFS (dm-7): Starting recovery (logdev: internal) [ 17.538547] XFS (dm-6): Ending clean mount [ 17.703624] XFS (dm-8): Starting recovery (logdev: internal) [ 17.796592] XFS (dm-8): Ending recovery (logdev: internal) [ 17.825153] XFS (dm-7): Ending recovery (logdev: internal) [ 17.847372] XFS (dm-3): Ending clean mount [ 17.901212] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 17.929116] XFS (dm-1): Ending clean mount [ 17.949172] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 18.156277] systemd-journald[444]: Received request to flush runtime journal from PID 1 [ 20.405168] ifquery[897]: segfault at 1 ip 00000000004031c8 sp 00007ffe4f12dc00 error 4 in ifup[400000+d000] [ 20.684726] audit: type=1400 audit(1432299658.298:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=908 comm="apparmor_parser" [ 20.684734] audit: type=1400 audit(1432299658.298:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=908 comm="apparmor_parser" [ 20.699879] audit: type=1400 audit(1432299658.314:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=908 comm="apparmor_parser" [ 20.699885] audit: type=1400 audit(1432299658.314:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=908 comm="apparmor_parser" [ 20.708163] audit: type=1400 audit(1432299658.322:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=908 comm="apparmor_parser" [ 20.708169] audit: type=1400 audit(1432299658.322:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=908 comm="apparmor_parser" [ 20.727133] audit: type=1400 audit(1432299658.342:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=908 comm="apparmor_parser" [ 20.727139] audit: type=1400 audit(1432299658.342:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=908 comm="apparmor_parser" [ 20.727146] audit: type=1400 audit(1432299658.342:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=908 comm="apparmor_parser" [ 21.357133] ip_tables: (C) 2000-2006 Netfilter Core Team [ 23.381110] zram: Created 8 device(s) ... [ 24.184220] nf_conntrack version 0.5.0 (24576 buckets, 196608 max) [ 24.869786] zram0: detected capacity change from 0 to 778977280 [ 26.202150] Adding 760716k swap on /dev/zram0. Priority:5 extents:1 across:760716k SSFS [ 26.202841] zram1: detected capacity change from 0 to 778977280 [ 26.205678] Adding 760716k swap on /dev/zram1. Priority:5 extents:1 across:760716k SSFS [ 26.206333] zram2: detected capacity change from 0 to 778977280 [ 26.209079] Adding 760716k swap on /dev/zram2. Priority:5 extents:1 across:760716k SSFS [ 26.209730] zram3: detected capacity change from 0 to 778977280 [ 26.212431] Adding 760716k swap on /dev/zram3. Priority:5 extents:1 across:760716k SSFS [ 26.213124] zram4: detected capacity change from 0 to 778977280 [ 26.215739] Adding 760716k swap on /dev/zram4. Priority:5 extents:1 across:760716k SSFS [ 26.216294] zram5: detected capacity change from 0 to 778977280 [ 26.218998] Adding 760716k swap on /dev/zram5. Priority:5 extents:1 across:760716k SSFS [ 26.219610] zram6: detected capacity change from 0 to 778977280 [ 26.222435] Adding 760716k swap on /dev/zram6. Priority:5 extents:1 across:760716k SSFS [ 26.222948] zram7: detected capacity change from 0 to 778977280 [ 26.225380] Adding 760716k swap on /dev/zram7. Priority:5 extents:1 across:760716k SSFS [ 28.719409] cfg80211: Calling CRDA for country: #A [ 49.421315] nvidia 0000:03:00.0: irq 53 for MSI/MSI-X [ 49.893141] NVRM: Your system is not currently configured to drive a VGA console [ 49.893145] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver [ 49.893146] NVRM: requires the use of a text-mode VGA console. Use of other console [ 49.893148] NVRM: drivers including, but not limited to, vesafb, may result in [ 49.893150] NVRM: corruption and stability problems, and is not supported. [ 428.561237] ERROR @wl_dev_intvar_get : error (-1) [ 428.561242] ERROR @wl_cfg80211_get_tx_power : error (-1)