as a reverse proxy, a 100 continue response is sent prematurely when a request contains expects: 100-continue

[Jay R. Wren]

This effects trusty, xenial and current httpd trunk.

https://bz.apache.org/bugzilla/show_bug.cgi?id=60330

As a reverse proxy, a 100 continue response is sent prematurely when a request contains expects: 100-continue. This causes the requesting client to send a body. The apache httpd proxy will then read the body and attempt to send it to the backend, but the backend already sent an error and should be allowed to NOT read the remaining request body, which never should have existed. When the backend does not read the request body mod_proxy_pass errors and returns a 500 error to the client. The client never receives the correct error message.

[Jay R. Wren (evarlast)]

Reverse proxy of 100-continue aware backend, sends 100 continue even when backend does not. This causes a client to think it should write a request body, while the backend may still respond with a 400 and not read the request body. mod_proxy_http then responds with 502 as a result of AH01097: pass request body failed

The backend is doing the right thing: it did not send a 100 continue so it should not be required to read a request body, regardless of transfer encoding or content-length.

Expected:

mod_proxy_http reverse proxy should not send 100-continue to a client unless the backend does.

[Jay R. Wren (evarlast)]

Created attachment 34438
in the reverse proxy case, if request had Expects: 100-continue, delay writing 100 continue response until backend has sent 100-continue response

[Ylavic-dev (ylavic-dev)]

Created attachment 34451
Forward 100-continue (and minimize race when reusing backend connections)

I proposed this patch a while ago on the dev@ list ([1]), this is an update for latest trunk, with more (though incomplete) testing.

Could you please give it a try?

[1]. https://lists.apache.org/thread.html/4e541e032b8a77ebec8248534637b47cdcd4f38af79baa5259845db0@1430360070@%3Cdev.httpd.apache.org%3E

[V-jiz-h (v-jiz-h)]

*** Bug 55433 has been marked as a duplicate of this bug. ***

[Robie Basak (racb)]

Thank you for taking the time to report this bug and helping to make Ubuntu better.

I think we should wait until upstream commits a fix for this before we do anything in Ubuntu. Or is there a specific need that requires this to fixed sooner in Ubuntu? Under what circumstances are Ubuntu users impacted by this problem?

[Jay R. Wren (evarlast)]

Hi Robie,

The specific need is that www.jujucharms.com uses apache2 as a reverse proxy to charmstore. The upload of resources and charms is suboptimal without 100-continue support. While investigating adding 100-continue support, we ran into this bug. As for a general need for this to be fixed in Ubuntu, I know of none, other than correctly supporting 100-continue in http reverse proxies.

Only Ubuntu users using mod_proxy_http to reverse proxy a service which implements 100-continue are impacted by this problem. There must not be any. I'm honestly surprised that this bug has existed for so long.

I am working with upstream to get this or a similar patch applied. I'll continue doing so.

Thanks,
--
Jay

[Jay R. Wren (evarlast)]

Yann,

I tried that patch, but I still get 503 error when expecting a 100 Continue response.

[Michael Osipov (michael-o)]

Any chance that this will be fixed? Have the very same problem from a backend Tomcat. I guess I need to drop mod_proxy and try mod_ajp or drop Apache HTTPd altogether for this.

[Ylavic-dev (ylavic-dev)]

*** Bug 57853 has been marked as a duplicate of this bug. ***

[Ylavic-dev (ylavic-dev)]

Sorry it's been a long time, I think we need more informations here as to the exact issue.

What exactly isn't working with the proposed patch?
Where are 100-continue or request bodies lacking or sent inappropriately, on which side (client/backend)?
IOW, can we please have a description/scenario of what is supposed to work and how, possibly with the expected request/response on both sides?
What is the configuration being tested?

[Michael Osipov (michael-o)]

(In reply to Yann Ylavic from comment #7)
> Sorry it's been a long time, I think we need more informations here as to
> the exact issue.
>
> What exactly isn't working with the proposed patch?
> Where are 100-continue or request bodies lacking or sent inappropriately, on
> which side (client/backend)?
> IOW, can we please have a description/scenario of what is supposed to work
> and how, possibly with the expected request/response on both sides?
> What is the configuration being tested?

Hi Yann,

I can provide a full verbose log of curl(1) for Tomcat behind HTTPd with faulty behavior and direct Tomcat communication. Moreover, I can expore the httpd.conf for that offending behavior.

[Ylavic-dev (ylavic-dev)]

Yes please do, along with the httpd error_log with LogLevel trace7.
Thanks!

[Michael Osipov (michael-o)]

Created attachment 36015
curl(1) to Tomcat directly

[Michael Osipov (michael-o)]

Created attachment 36016
curl(1) to Tomcat via HTTPd

[Michael Osipov (michael-o)]

The error log has been sent privately due to sensitive data. Looking forward to an analysis.

[Michael Osipov (michael-o)]

FYI, I have tried mod_proxy_{http,ajp} and mod_jk.

[Ylavic-dev (ylavic-dev)]

Thanks Michael, at first glance the error_log is with mod_proxy_ajp, while attachment 34451 is about mod_proxy_http (and I'd like to keep the scope there for now).
I agree that unpatched mod_proxy_http sends "100 continue" too soon (actually independently on the client and backend side).
The patch is precisely to avoid that (hop by hop 100-continue handling), did you give it a try? If yes, could I have the error_log with mod_proxy_http?

[Michael Osipov (michael-o)]

(In reply to Yann Ylavic from comment #14)
> Thanks Michael, at first glance the error_log is with mod_proxy_ajp, while
> attachment 34451 [details] is about mod_proxy_http (and I'd like to keep the
> scope there for now).
> I agree that unpatched mod_proxy_http sends "100 continue" too soon
> (actually independently on the client and backend side).
> The patch is precisely to avoid that (hop by hop 100-continue handling), did
> you give it a try? If yes, could I have the error_log with mod_proxy_http?

I agree, I have tried all possible modules with the same negative result. I will redo for you. Moreover, I will compile from trunk along with your patch and try to reproduce. Does it still apply cleanly to trunk?

Please be patient, I won't be able to test anything before 2018-07-23.

Thank you.

[Jfclere (jfclere)]

Created attachment 36046
web.xml (to put in webapps/ROOT/WEB-INF/)

[Jfclere (jfclere)]

Created attachment 36047
jsp to demonstrate the issue (put it in webapps/ROOT)

[Jfclere (jfclere)]

when using the web.xml and red.jsp and having
<tomcat-users xmlns="http://tomcat.apache.org/xml"
              xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
              xsi:schemaLocation="http://tomcat.apache.org/xml tomcat-users.xsd"
              version="1.0">
  <role rolename="manager"/>
  <user username="tomcat" password="tomcat" roles="manager"/>
</tomcat-users>
in conf/tomcat-users.xml in tomcat you can get the problem with basic authentication:
curl --verbose --anyauth -u tomcat:tomcat http://localhost:8000/read.jsp -X POST -T file -H "Content-Type: text/plain"

file needs to be big enough ~8.5M

you will get:
[jfclere@dhcp-144-173 build]$ curl --verbose --anyauth -u tomcat:tomcat http://localhost:8000/read.jsp -X POST -T toto -H "Content-Type: text/plain"
* Trying ::1...
* TCP_NODELAY set
* Connected to localhost (::1) port 8000 (#0)
> POST /read.jsp HTTP/1.1
> Host: localhost:8000
> User-Agent: curl/7.59.0
> Accept: */*
> Content-Type: text/plain
> Content-Length: 8849904
> Expect: 100-continue
>
< HTTP/1.1 100 Continue
* We are completely uploaded and fine
< HTTP/1.1 504 Gateway Timeout
< Date: Mon, 23 Jul 2018 20:38:21 GMT
< Server: Apache/2.5.1-dev (Unix) OpenSSL/1.1.0h-fips
< Content-Length: 247
< Content-Type: text/html; charset=iso-8859-1
<
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<html><head>
<title>504 Gateway Timeout</title>
</head><body>
<h1>Gateway Timeout</h1>
<p>The gateway did not receive a timely response
from the upstream server or application.</p>
</body></html>
* Connection #0 to host localhost left intact

[Jfclere (jfclere)]

Created attachment 36048
Patch for trunkthat works for me (based on Yann one)

[Ylavic-dev (ylavic-dev)]

Thanks Jean-Frédéric, applied in r1836588.

This is the same patch (plus a req != NULL check) rebased on latest trunk, right?

[Michael Osipov (michael-o)]

Commit on trunk does not work for me. I will send logs privately to Yann.

[Ylavic-dev (ylavic-dev)]

Thanks for testing Michael.

Fixed in r1836648 (hopefully).

[Jfclere (jfclere)]

Fixed according to my tests.

[Michaelo-p (michaelo-p)]

Can we please backport this to 2.4.x branch? It is not present in 2.4.35 :-(

[Michaelo-p (michaelo-p)]

Folks, can we please backport to 2.4.38 finally?

[Michaelo-p (michaelo-p)]

This also blocks CONNECTORS-1564.

[Ylavic-dev (ylavic-dev)]

Proposed for backport to 2.4.x (r1853409), let's see what other committers think, notably if it's too much of a change for the stable branch. If so, this will have to wait for next 2.6/3.0...

[Ylavic-dev (ylavic-dev)]

Also, testing the tomcat CONNECTORS-1564 case with the final patch ([1]) would be very welcome ;)

[1] http://people.apache.org/~ylavic/patches/httpd-2.4.x-forward_100_continue.patch

[Ylavic-dev (ylavic-dev)]

(In reply to Yann Ylavic from comment #28)
> tomcat CONNECTORS-1564

Looks like it's Solr actually, but all tests are welcome.

[Michaelo-p (michaelo-p)]

(In reply to Yann Ylavic from comment #27)
> Proposed for backport to 2.4.x (r1853409), let's see what other committers
> think, notably if it's too much of a change for the stable branch. If so,
> this will have to wait for next 2.6/3.0...

Yann, I will happily try this patch against 2.4.x next week. It would be quite disappointing if it won't make into 2.4.x because I this isn't an improvement, but a serious bug.

[Michaelo-p (michaelo-p)]

Dropped patch v2 to the files directory of the FreeBSD ports, patch applied cleanly, reinstalled 2.4.38 and ran my test:

> $ curl --verbose -X POST --upload $HOME/sitex-document.3305025974265279540.zip https://blnn719x.ad001.siemens.net/ld-docgen/rest/documents --negotiate -u : -H 'Content-Type: application/zip'
> * Expire in 0 ms for 6 (transfer 0x28845000)
> * Expire in 1 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 1 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 1 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 1 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 1 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 1 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 1 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 1 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 1 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 1 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 1 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 1 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 1 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 1 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 1 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 1 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 1 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 1 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 1 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 1 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms for 1 (transfer 0x28845000)
> * Expire in 1 ms for 1 (transfer 0x28845000)
> * Expire in 0 ms...

[Ylavic-dev (ylavic-dev)]

Thanks Michael for the very appropriate test: first 401 which avoids the "100 continue" danse and thus gets forwarded with "connection: close", second 201 with the full thing.

Great!

[Michaelo-p (michaelo-p)]

(In reply to Yann Ylavic from comment #32)
> Thanks Michael for the very appropriate test: first 401 which avoids the
> "100 continue" danse and thus gets forwarded with "connection: close",
> second 201 with the full thing.
>
> Great!

Thank your for the extensive patch. Looking forward to see this on 2.4.x and mod_proxy_ajp to be fixed afterwards.

[Michaelo-p (michaelo-p)]

I have just noticed that v4 is available of the patch. I have removed v2 from ${FILESDIR} and added v4, recompiled and reinstalled apach24 port. It works flawlessly as before with v2.

What did change? Does it affect the user?

[Steffn (steffn)]

I do not know about v3 exactly, but v4 addresses a side effect the change had for the HTTP/2 protocol implementation.

[S-buesing (s-buesing)]

We also happen to stumble accross this bug. Using Apache 2.4.38 and Tomcat 7.0.90.

Applying the patch http://people.apache.org/~ylavic/patches/httpd-2.4.x-forward_100_continue.patch did not fix the problem in our case. Is this the correct patch?

[Ylavic-dev (ylavic-dev)]

The latest patch is: http://people.apache.org/~ylavic/patches/httpd-2.4.x-forward_100_continue-v4.patch

What's the problem in your case?

[S-buesing (s-buesing)]

Thanks, I tried with v4 patch as well, still recieving a 502 bad gateway after sending a file via POST.

curl -v 'http://localhost:8080/action/forms/sprint-12/contact-page-85176' -X POST -T /tmp/test.dd
* Trying 127.0.0.1...
* TCP_NODELAY set
* Connected to localhost (127.0.0.1) port 8080 (#0)
> POST /action/forms/sprint-12/contact-page-85176 HTTP/1.1
> Host: localhost:8080
> User-Agent: curl/7.58.0
> Accept: */*
> Content-Length: 104857600
> Expect: 100-continue
>
< HTTP/1.1 100 Continue
< Via: 1.1 xyz.com:8080
* We are completely uploaded and fine
< HTTP/1.1 502 Bad Gateway
< Date: Fri, 08 Mar 2019 14:34:52 GMT
< Server: Apache
< Content-Length: 293
< Content-Type: text/html; charset=iso-8859-1
<
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<html><head>
<title>502 Bad Gateway</title>
</head><body>
<h1>Bad Gateway</h1>
<p>The proxy server received an invalid
response from an upstream server.<br />
</p>
<hr>
<address>Apache Server at localhost Port 8080</address>
</body></html>
* Connection #0 to host localhost left intact

Apache logs this directly after sending the request:

[Fri Mar 08 14:32:32.808488 2019] [proxy:error] [pid 15:tid 140341990573824] (104)Connection reset by peer: [client 10.244.13.181:53536] AH01084: pass request body failed to 127.0.0.1:42180 (localhost), referer: https://xyz.com/sprint-12/contact-page
[Fri Mar 08 14:32:32.808571 2019] [proxy_http:error] [pid 15:tid 140341990573824] [client 10.244.13.181:53536] AH01097: pass request body failed to 127.0.0.1:42180 (localhost) from 10.244.13.181 (), referer: https://xyz.com/sprint-12/contact-page

[Ylavic-dev (ylavic-dev)]

Looks like a backend error, could you please provide the error log with LogLevel trace7 and mod_dumpio configured (DumpIoInput on, DumpIoOutput on)?

[S-buesing (s-buesing)]

Created attachment 36478
apache-trace7-dumpio logfile

I added the log as attachment.
If I'm really mistaking something else for this bug I'm sorry.

[Ylavic-dev (ylavic-dev)]

Everything looks fine until:
[Fri Mar 08 15:23:06.165463 2019] [proxy:error] [pid 869:tid 140678264567552] (104)Connection reset by peer: [client 127.0.0.1:53920] AH01084: pass request body failed to 127.0.0.1:42180 (localhost)
[Fri Mar 08 15:23:06.165530 2019] [proxy_http:error] [pid 869:tid 140678264567552] [client 127.0.0.1:53920] AH10154: pass request body failed to 127.0.0.1:42180 (localhost) from 127.0.0.1 () with status 502

After that httpd eats the rest of the request body (more than 100MB overall), and responds with 502. The backend really looks faulty here.

[S-buesing (s-buesing)]

You're right, the backend was faulty here, we could fix the issue there and as soon as we did that it acutally worked with the unpatched version again. Sorry for the noise.

[Michaelo-p (michaelo-p)]

Just tried to apply v5 to 2.4.38 and 2.4.39 from the FreeBSD ports system. It is incompatible along with the other patches available there: https://github.com/freebsd/freebsd-ports/tree/master/www/apache24/files

Since 2.4.39 is already out and does not include this patch what is the status? I'd like to test out v5, but need to figure out why it is actually failing here.

[Ylavic-dev (ylavic-dev)]

Yes, the patch did not make it to 2.4.39 which was mainly a security release, and this change is not really trivial.. Hopefully 2.4.40 is coming soon.

As for v5 ([0] below, just in case), I just tried to apply it on top of 2.4.39 (from svn) and then to apply the freebsd patches from your link, but got no conflict. What are the issues you observe exactly?

[0] http://people.apache.org/~ylavic/patches/httpd-2.4.x-forward_100_continue-v5.patch

[Michaelo-p (michaelo-p)]

OK, I have it now. For some reason the patch hunk against CHANGES and the docs fail to apply. I have removed those hunks and the patch applied cleanly now.

Here is the output from curl:

> + curl --verbose --http1.1 --anyauth -u : -f -s --upload-file target/lda-docgen-webapp-0.2-SNAPSHOT-backend-dev-anon.war -o manager-response.txt 'https://sitex-ldadw.ad001.siemens.net/backend-dev-anon/manager-1/text/deploy?path=/backend-dev-anon&update=false&version=009'
> * Uses proxy env variable NO_PROXY == 'localhost .siemens.net .siemens.com .siemens.de'
> * Trying 147.54.64.149...
> * TCP_NODELAY set
> * Connected to sitex-ldadw.ad001.siemens.net (147.54.64.149) port 443 (#0)
> * ALPN, offering http/1.1
> * successfully set certificate verify locations:
> * CAfile: /usr/local/etc/ssl/cert.pem
> CApath: none
> } [5 bytes data]
> * TLSv1.3 (OUT), TLS handshake, Client hello (1):
> } [512 bytes data]
> * TLSv1.3 (IN), TLS handshake, Server hello (2):
> { [122 bytes data]
> * TLSv1.3 (IN), TLS handshake, Encrypted Extensions (8):
> { [25 bytes data]
> * TLSv1.3 (IN), TLS handshake, Certificate (11):
> { [6195 bytes data]
> * TLSv1.3 (IN), TLS handshake, CERT verify (15):
> { [520 bytes data]
> * TLSv1.3 (IN), TLS handshake, Finished (20):
> { [52 bytes data]
> * TLSv1.3 (OUT), TLS change cipher, Change cipher spec (1):
> } [1 bytes data]
> * TLSv1.3 (OUT), TLS handshake, Finished (20):
> } [52 bytes data]
> * SSL connection using TLSv1.3 / TLS_AES_256_GCM_SHA384
> * ALPN, server accepted to use http/1.1
> * Server certificate:
> * subject: C=DE; O=Siemens; OU=LDA DW; CN=sitex-ldadw.ad001.siemens.net
> * start date: Mar 19 13:10:13 2019 GMT
> * expire date: Mar 19 13:10:13 2020 GMT
> * subjectAltName: host "sitex-ldadw.ad001.siemens.net" matched cert's "sitex-ldadw.ad001.siemens.net"
> * issuer: C=DE; ST=Bayern; L=Muenchen; O=Siemens; serialNumber=ZZZZZZB7; OU=Siemens Trust Center; CN=Siemens Issuing CA Intranet Server 2017
> * SSL certificate verify ok.
> } [5 bytes data]
> > PUT /backend-dev-anon/manager-1/text/deploy?path=/backend-dev-anon&update=false&version=009 HTTP/1.1
> > Host: sitex-ldadw.ad001.siemens.net
> > User-Agent: curl/7.64.1
> > Accept: */*
> > Content-Length: 6501669
> > Expect: 100-continue
> >
> { [5 bytes data]
> * TLSv1.3 (IN), TLS handshake, Newsession Ticket (4):
> { [297 bytes data]
> * TLSv1.3 (IN), TLS handshake, Newsession Ticket (4):
> { [297 bytes data]
> * old SSL session ID is stale, removing
> { [5 bytes data]
> < HTTP/1.1 401
> < Date: Wed, 03 Apr 2019 13:04:06 GMT
> < Server: Apache/2.4.39 (FreeBSD) OpenSSL/1.1.1a-freebsd mod_auth_gssapi/1.6.1
> < X-Frame-Options: SAMEORIGIN
> < Cache-Control: private
> < Expires: Thu, 01 Jan 1970 00:00:00 GMT
> < WWW-Authenticate: Negotiate
> < Content-Type: text/html;charset=utf-8
> < Content-Language: en
> < Content-Length: 802
> < Connection: close
> <
> * Closing connection 0
> } [5 bytes data]
> * TLSv1.3 (OUT), TLS alert, close notify (256):
> } [2 bytes data]
> * Issue another request to this URL: 'https://sitex-ldadw.ad001.siemens.net/backend-dev-anon/manager-1/text/deploy?path=/backend-dev-anon&update=false&version=009'
> * Uses proxy env variable NO_PROXY == 'loca...

[Michaelo-p (michaelo-p)]

I can see in Subversion that this patch has several +1 votes. Is it scheduled for 2.4.40 then?

[Ylavic-dev (ylavic-dev)]

Yes, likely scheduled for 2.4.40, missing one vote only.
Please note that the patch has been updated to v6 to resolve some conflicts from unrelated changes already merged in 2.4.40.

[Michaelo-p (michaelo-p)]

(In reply to Yann Ylavic from comment #47)
> Yes, likely scheduled for 2.4.40, missing one vote only.
> Please note that the patch has been updated to v6 to resolve some conflicts
> from unrelated changes already merged in 2.4.40.

Genius, I will try the new patch tomorrow against 2.4.39.

[Minfrin-s (minfrin-s)]

Backported to v2.4.40.

[Bryce Harrington (bryce)]

From the upstream bug report, it looks like it's been cleanly backported to 2.4.38 and newer. Disco is 2.4.38, and eoan and focal are both 2.4.41 presently. Focal may get the upstream-backported fix when we next merge from debian, the others may require SRU if we want to include it. bionic and trusty are on older versions of apache2, however, and so may need more effort to backport.

[Andreas Hasenack (ahasenack)]

Since this is fixed in 2.4.40, that means eoan and focal have the fix already, since they are at 2.4.41.
Confirmed in the CHANGES file:
"""
Changes with Apache 2.4.40
...
  *) mod_proxy_http: forward 100-continue, and minimize race conditions when
     reusing backend connections. PR 60330. [Yann Ylavic, Jean-Frederic Clere]
"""

[Luhliari (luhliari)]

Hi all,

I'm experiencing one more issue (I'm not sure, if it is related to this bug or not).

There is following configuration:

1) reverse proxy server with configuration:
ProxyPass /sample/ balancer://cluster/
<Proxy balancer://cluster>
  BalancerMember http://10.0.138.138:80 ping=5
  BalancerMember http://10.0.138.59:80 ping=5
</Proxy>

2) Backend server A - 10.0.138.138
- perl script - /var/www/cgi-bin/test.cgi
#!/usr/bin/perl
print "Content-type: text/plain\r\n";
print "\r\n";
read (STDIN, $data, $ENV{'CONTENT_LENGTH'});

3) Backend server B - 10.0.138.59
- on this backend, we are dropping packets from reverse proxy server:
  # iptables -A INPUT -s 10.0.137.13 -j DROP
- perl script - /var/www/cgi-bin/test.cgi
#!/usr/bin/perl
print "Content-type: text/plain\r\n";
print "\r\n";
read (STDIN, $data, $ENV{'CONTENT_LENGTH'});

4) client
# echo "abcd" > /tmp/data
# curl -X POST --data-binary '@/tmp/data' http://10.0.137.13/sample/cgi-bin/test.cgi

- when reverse proxy selects backend server B, it fails to connect to it and then fail over to backend server A. But when I collect network traffic on backend server B, invalid Content-Length is set. Network data in case of no fail-over:

"POST /cgi-bin/test.cgi HTTP/1.1
Host: 10.0.138.138
User-Agent: curl/7.65.3
Accept: */*
Content-Type: application/x-www-form-urlencoded
Expect: 100-Continue
X-Forwarded-For: 10.0.136.27
X-Forwarded-Host: 10.0.137.13
X-Forwarded-Server: fe80::f816:3eff:fe62:246
Content-Length: 5
Connection: Keep-Alive

HTTP/1.1 100 Continue

abcd
HTTP/1.1 200 OK
Date: Tue, 03 Mar 2020 12:23:15 GMT
Server: Apache/2.4.41 (Fedora)
Keep-Alive: timeout=5, max=100
Connection: Keep-Alive
Transfer-Encoding: chunked
Content-Type: text/plain; charset=UTF-8
"

vs. network data when there was a fail-over:

"POST /cgi-bin/test.cgi HTTP/1.1
Host: 10.0.138.138
User-Agent: curl/7.65.3
Accept: */*
Content-Type: application/x-www-form-urlencoded
Expect: 100-Continue
X-Forwarded-For: 10.0.136.27
X-Forwarded-Host: 10.0.137.13
X-Forwarded-Server: fe80::f816:3eff:fe62:246
Content-Length: 0
Connection: Keep-Alive

HTTP/1.1 200 OK
Date: Tue, 03 Mar 2020 12:24:18 GMT
Server: Apache/2.4.41 (Fedora)
Connection: close
Content-Type: text/plain; charset=UTF-8
"

I don't know mod_proxy very well, but I did some debugging. When reverse proxy server tries to contact backend server B, it executes ap_proxy_http_prefetch function, reads data from r->input_filters, sets temp_brigade, then stores temp_brigade into input_brigade and leaves function. Then on fail-over, it executes ap_proxy_http_prefetch function again, but no data are read and C-L is set to 0.

1) run, without fail-over (backend server A is contacted first):
- in ap_proxy_http_prefetch function is called just once:
   - input_brigade:
    0 | HEAP (0x7fffc80012c8) | 5 | 0x7fffc8001188 | [abcd~] | 1
    1 | EOS (0x7fffc8001e08) | 0 | 0x00000000 | | n/a
   - cl_val is set to 5, old_cl_val is set to "5"

2) run, with fail-over (backend server B is contacted first, then it fails-over on backend server A)
- first call of ap_proxy_http_prefetch function is same as in case of run without fail-over
- second ap_proxy_http_prefetch call...

[Ylavic-dev (ylavic-dev)]

(In reply to Lubos Uhliarik from comment #50)
This follow up issue is being handled in bug 63891, a patch for 2.4 is available there (not yet backported to 2.4.next).

[Lucas Kanashiro (lucaskanashiro)]

If the bug reported above (Upstream Bug 63891 - Balancer failover fails for POST with small request Body and CL set) is pertinent for you please file a new Ubuntu bug, and then we can start to track it properly.

[Ylavic-dev (ylavic-dev)]

*** Bug 55433 has been marked as a duplicate of this bug. ***