[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-3-generic (buildd@batsu) (gcc version 4.7.1 (Ubuntu/Linaro 4.7.1-2ubuntu1) ) #3-Ubuntu SMP Mon Jul 2 16:49:22 UTC 2012 (Ubuntu 3.5.0-3.3-generic 3.5.0-rc5) [ 0.000000] Command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffaffff] usable [ 0.000000] BIOS-e820: [mem 0x000000003ffb0000-0x000000003ffbffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000003ffc0000-0x000000003ffeffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000003fff0000-0x000000003fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./A8V Deluxe, BIOS 1018.002 08/16/2007 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP bridge at 00:00:00 [ 0.000000] Aperture from AGP @ ce000000 old size 32 MB [ 0.000000] Aperture from AGP @ ce000000 size 32 MB (APSIZE f38) [ 0.000000] e820: last_pfn = 0x3ffb0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 00CE000000 mask FFFE000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x3ffaffff] [ 0.000000] [mem 0x00000000-0x3fdfffff] page 2M [ 0.000000] [mem 0x3fe00000-0x3ffaffff] page 4k [ 0.000000] kernel direct mapping tables up to 0x3ffaffff @ [mem 0x1fdfe000-0x1fffffff] [ 0.000000] RAMDISK: [mem 0x3f0c0000-0x3ffaffff] [ 0.000000] ACPI: RSDP 00000000000fa7c0 00021 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 000000003ffb0100 00044 (v01 ACRSYS ACRPRDCT 08000716 MSFT 00000097) [ 0.000000] ACPI: FACP 000000003ffb0290 000F4 (v03 A M I OEMFACP 08000716 MSFT 00000097) [ 0.000000] ACPI: DSDT 000000003ffb03f0 03A3E (v01 A0036 A0036001 00000001 MSFT 0100000D) [ 0.000000] ACPI: FACS 000000003ffc0000 00040 [ 0.000000] ACPI: APIC 000000003ffb0390 00052 (v01 A M I OEMAPIC 08000716 MSFT 00000097) [ 0.000000] ACPI: SLIC 000000003ffb3e30 00176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001) [ 0.000000] ACPI: OEMB 000000003ffc0040 0003F (v01 A M I OEMBIOS 08000716 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000003ffaffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x3ffaffff] [ 0.000000] NODE_DATA [mem 0x3f0bc000-0x3f0bffff] [ 0.000000] [ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003d800000-ffff88003e7fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x3ffaffff] [ 0.000000] On node 0 totalpages: 261951 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 8 pages reserved [ 0.000000] DMA zone: 3911 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 4031 pages used for memmap [ 0.000000] DMA32 zone: 253937 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] e820: [mem 0x40000000-0xff77ffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003ee00000 s83520 r8192 d22976 u1048576 [ 0.000000] pcpu-alloc: s83520 r8192 d22976 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 257848 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] AGP bridge at 00:00:00 [ 0.000000] Aperture from AGP @ ce000000 old size 32 MB [ 0.000000] Aperture from AGP @ ce000000 size 32 MB (APSIZE f38) [ 0.000000] Node 0: aperture @ ce000000 size 32 MB [ 0.000000] Aperture too small (32 MB) than (64 MB) [ 0.000000] Memory: 1000056k/1048256k available (6659k kernel code, 452k absent, 47748k reserved, 6503k data, 924k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 4194304 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2202.740 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4405.48 BogoMIPS (lpj=8810960) [ 0.004009] pid_max: default: 32768 minimum: 301 [ 0.004038] Security Framework initialized [ 0.004058] AppArmor: AppArmor initialized [ 0.004059] Yama: becoming mindful. [ 0.004199] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.004913] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.005218] Mount-cache hash table entries: 256 [ 0.005456] Initializing cgroup subsys cpuacct [ 0.005459] Initializing cgroup subsys memory [ 0.005470] Initializing cgroup subsys devices [ 0.005472] Initializing cgroup subsys freezer [ 0.005473] Initializing cgroup subsys blkio [ 0.005475] Initializing cgroup subsys perf_event [ 0.005503] tseg: 0000000000 [ 0.005518] mce: CPU supports 5 MCE banks [ 0.005554] SMP alternatives: switching to UP code [ 0.014461] ACPI: Core revision 20120320 [ 0.016497] ftrace: allocating 24964 entries in 98 pages [ 0.029150] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.071360] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 00 [ 0.072003] Performance Events: AMD PMU driver. [ 0.072003] ... version: 0 [ 0.072003] ... bit width: 48 [ 0.072003] ... generic registers: 4 [ 0.072003] ... value mask: 0000ffffffffffff [ 0.072003] ... max period: 00007fffffffffff [ 0.072003] ... fixed-purpose events: 0 [ 0.072003] ... event mask: 000000000000000f [ 0.072003] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.072003] Brought up 1 CPUs [ 0.072003] Total of 1 processors activated (4405.48 BogoMIPS). [ 0.072003] devtmpfs: initialized [ 0.072003] EVM: security.selinux [ 0.072003] EVM: security.SMACK64 [ 0.072003] EVM: security.capability [ 0.072003] PM: Registering ACPI NVS region [mem 0x3ffc0000-0x3ffeffff] (196608 bytes) [ 0.072003] dummy: [ 0.072003] RTC time: 11:22:11, date: 07/08/12 [ 0.072003] NET: Registered protocol family 16 [ 0.072003] node 0 link 0: io port [1000, ffffff] [ 0.072003] TOM: 0000000040000000 aka 1024M [ 0.072014] node 0 link 0: mmio [a0000, bffff] [ 0.072017] node 0 link 0: mmio [40000000, ffffffff] [ 0.072019] bus: [00, ff] on node 0 link 0 [ 0.072022] bus: 00 [io 0x0000-0xffff] [ 0.072024] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.072025] bus: 00 [mem 0x40000000-0xfcffffffff] [ 0.072076] ACPI: bus type pci registered [ 0.072134] PCI: Using configuration type 1 for base access [ 0.073086] bio: create slab at 0 [ 0.073196] ACPI: Added _OSI(Module Device) [ 0.073198] ACPI: Added _OSI(Processor Device) [ 0.073200] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.073202] ACPI: Added _OSI(Processor Aggregator Device) [ 0.074076] ACPI: EC: Look up EC in DSDT [ 0.074912] ACPI: Executed 1 blocks of module-level executable AML code [ 0.076465] ACPI Warning: Incorrect checksum in table [OEMB] - 0x00, should be 0xFD (20120320/tbutils-323) [ 0.076722] ACPI: Interpreter enabled [ 0.076726] ACPI: (supports S0 S1 S3 S4 S5) [ 0.076746] ACPI: Using IOAPIC for interrupt routing [ 0.081091] ACPI: No dock devices found. [ 0.081096] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.081164] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.081268] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.081271] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.081273] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.081276] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xffffffff] (ignored) [ 0.081277] PCI: root bus 00: hardware-probed resources [ 0.081317] PCI host bridge to bus 0000:00 [ 0.081320] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.081322] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.081324] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfcffffffff] [ 0.081340] pci 0000:00:00.0: [1106:0282] type 00 class 0x060000 [ 0.081349] pci 0000:00:00.0: reg 10: [mem 0xce000000-0xcfffffff pref] [ 0.081417] pci 0000:00:00.1: [1106:1282] type 00 class 0x060000 [ 0.081451] pci 0000:00:00.2: [1106:2282] type 00 class 0x060000 [ 0.081484] pci 0000:00:00.3: [1106:3282] type 00 class 0x060000 [ 0.081518] pci 0000:00:00.4: [1106:4282] type 00 class 0x060000 [ 0.081554] pci 0000:00:00.7: [1106:7282] type 00 class 0x060000 [ 0.081590] pci 0000:00:01.0: [1106:b188] type 01 class 0x060400 [ 0.081626] pci 0000:00:01.0: supports D1 [ 0.081646] pci 0000:00:09.0: [1814:0201] type 00 class 0x028000 [ 0.081660] pci 0000:00:09.0: reg 10: [mem 0xfb800000-0xfb801fff] [ 0.081729] pci 0000:00:0a.0: [11ab:4320] type 00 class 0x020000 [ 0.081744] pci 0000:00:0a.0: reg 10: [mem 0xfba00000-0xfba03fff] [ 0.081752] pci 0000:00:0a.0: reg 14: [io 0xa000-0xa0ff] [ 0.081781] pci 0000:00:0a.0: reg 30: [mem 0xfb900000-0xfb91ffff pref] [ 0.081809] pci 0000:00:0a.0: supports D1 D2 [ 0.081811] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.081835] pci 0000:00:0f.0: [1106:3149] type 00 class 0x010400 [ 0.081849] pci 0000:00:0f.0: reg 10: [io 0xc000-0xc007] [ 0.081857] pci 0000:00:0f.0: reg 14: [io 0xb800-0xb803] [ 0.081866] pci 0000:00:0f.0: reg 18: [io 0xb400-0xb407] [ 0.081874] pci 0000:00:0f.0: reg 1c: [io 0xb000-0xb003] [ 0.081882] pci 0000:00:0f.0: reg 20: [io 0xa800-0xa80f] [ 0.081890] pci 0000:00:0f.0: reg 24: [io 0xa400-0xa4ff] [ 0.081936] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a [ 0.081975] pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f] [ 0.082030] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300 [ 0.082064] pci 0000:00:10.0: reg 20: [io 0xc400-0xc41f] [ 0.082095] pci 0000:00:10.0: supports D1 D2 [ 0.082098] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.082114] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300 [ 0.082148] pci 0000:00:10.1: reg 20: [io 0xc800-0xc81f] [ 0.082179] pci 0000:00:10.1: supports D1 D2 [ 0.082181] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.082197] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300 [ 0.082231] pci 0000:00:10.2: reg 20: [io 0xd000-0xd01f] [ 0.082263] pci 0000:00:10.2: supports D1 D2 [ 0.082265] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.082281] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300 [ 0.082315] pci 0000:00:10.3: reg 20: [io 0xd400-0xd41f] [ 0.082346] pci 0000:00:10.3: supports D1 D2 [ 0.082348] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.082364] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320 [ 0.082377] pci 0000:00:10.4: reg 10: [mem 0xfbc00000-0xfbc000ff] [ 0.082430] pci 0000:00:10.4: supports D1 D2 [ 0.082432] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.082451] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100 [ 0.082500] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.082505] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices [ 0.082546] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100 [ 0.082560] pci 0000:00:11.5: reg 10: [io 0xd800-0xd8ff] [ 0.082619] pci 0000:00:11.5: supports D1 D2 [ 0.082635] pci 0000:00:11.6: [1106:3068] type 00 class 0x078000 [ 0.082648] pci 0000:00:11.6: reg 10: [io 0x0000-0x00ff] [ 0.082723] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.082741] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.082755] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.082769] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.082813] pci 0000:01:00.0: [1002:4152] type 00 class 0x030000 [ 0.082823] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref] [ 0.082829] pci 0000:01:00.0: reg 14: [io 0xe000-0xe0ff] [ 0.082834] pci 0000:01:00.0: reg 18: [mem 0xfbe00000-0xfbe0ffff] [ 0.082851] pci 0000:01:00.0: reg 30: [mem 0xfbd00000-0xfbd1ffff pref] [ 0.082871] pci 0000:01:00.0: supports D1 D2 [ 0.082883] pci 0000:01:00.1: [1002:4172] type 00 class 0x038000 [ 0.082892] pci 0000:01:00.1: reg 10: [mem 0xe0000000-0xefffffff pref] [ 0.082898] pci 0000:01:00.1: reg 14: [mem 0xfbf00000-0xfbf0ffff] [ 0.082930] pci 0000:01:00.1: supports D1 D2 [ 0.082955] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.082959] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.082962] pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbffffff] [ 0.082966] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xfaffffff pref] [ 0.082974] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.083162] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 0.088149] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) [ 0.088192] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) [ 0.088233] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) [ 0.088273] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.088314] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.088354] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.088395] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.088435] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.088559] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.088562] vgaarb: loaded [ 0.088563] vgaarb: bridge control possible 0000:01:00.0 [ 0.088771] SCSI subsystem initialized [ 0.088834] libata version 3.00 loaded. [ 0.088854] ACPI: bus type usb registered [ 0.088874] usbcore: registered new interface driver usbfs [ 0.088885] usbcore: registered new interface driver hub [ 0.088908] usbcore: registered new device driver usb [ 0.088989] PCI: Using ACPI for IRQ routing [ 0.088992] PCI: pci_cache_line_size set to 64 bytes [ 0.089001] pci 0000:00:00.0: address space collision: [mem 0xce000000-0xcfffffff pref] conflicts with GART [mem 0xce000000-0xcfffffff] [ 0.089073] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.089076] e820: reserve RAM buffer [mem 0x3ffb0000-0x3fffffff] [ 0.089177] NetLabel: Initializing [ 0.089179] NetLabel: domain hash size = 128 [ 0.089180] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.089192] NetLabel: unlabeled traffic allowed by default [ 0.097836] AppArmor: AppArmor Filesystem Enabled [ 0.097871] pnp: PnP ACPI init [ 0.097888] ACPI: bus type pnp registered [ 0.097996] pnp 00:00: [bus 00-ff] [ 0.097999] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.098002] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.098004] pnp 00:00: [io 0x0d00-0xffff window] [ 0.098007] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.098009] pnp 00:00: [mem 0x00000000 window] [ 0.098011] pnp 00:00: [mem 0x40000000-0xffffffff window] [ 0.098058] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.098085] pnp 00:01: [dma 4] [ 0.098087] pnp 00:01: [io 0x0000-0x000f] [ 0.098089] pnp 00:01: [io 0x0081-0x0083] [ 0.098091] pnp 00:01: [io 0x0087] [ 0.098093] pnp 00:01: [io 0x0089-0x008b] [ 0.098095] pnp 00:01: [io 0x008f] [ 0.098097] pnp 00:01: [io 0x00c0-0x00df] [ 0.098118] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.098129] pnp 00:02: [io 0x0070-0x0071] [ 0.098141] pnp 00:02: [irq 8] [ 0.098164] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.098191] pnp 00:03: [io 0x0060] [ 0.098193] pnp 00:03: [io 0x0064] [ 0.098199] pnp 00:03: [irq 1] [ 0.098228] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.098255] pnp 00:04: [io 0x0061] [ 0.098275] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.098284] pnp 00:05: [io 0x00f0-0x00ff] [ 0.098290] pnp 00:05: [irq 13] [ 0.098314] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.098579] pnp 00:06: [irq 6] [ 0.098581] pnp 00:06: [dma 2] [ 0.098583] pnp 00:06: [io 0x03f0-0x03f5] [ 0.098585] pnp 00:06: [io 0x03f7] [ 0.098637] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.098791] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled] [ 0.098794] pnp 00:07: [io 0x0680-0x06ff] [ 0.098796] pnp 00:07: [io 0x0290-0x0297] [ 0.098856] system 00:07: [io 0x0680-0x06ff] has been reserved [ 0.098859] system 00:07: [io 0x0290-0x0297] has been reserved [ 0.098862] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.098936] pnp 00:08: [io 0x0010-0x001f] [ 0.098938] pnp 00:08: [io 0x0022-0x003f] [ 0.098940] pnp 00:08: [io 0x0044-0x005f] [ 0.098943] pnp 00:08: [io 0x0062-0x0063] [ 0.098945] pnp 00:08: [io 0x0065-0x006f] [ 0.098947] pnp 00:08: [io 0x0072-0x007f] [ 0.098949] pnp 00:08: [io 0x0080] [ 0.098951] pnp 00:08: [io 0x0084-0x0086] [ 0.098953] pnp 00:08: [io 0x0088] [ 0.098955] pnp 00:08: [io 0x008c-0x008e] [ 0.098957] pnp 00:08: [io 0x0090-0x009f] [ 0.098959] pnp 00:08: [io 0x00a2-0x00bf] [ 0.098961] pnp 00:08: [io 0x00e0-0x00ef] [ 0.098963] pnp 00:08: [io 0x03e1-0x03e7] [ 0.098965] pnp 00:08: [io 0x04d0-0x04d1] [ 0.098967] pnp 00:08: [io 0x0800-0x087f] [ 0.098969] pnp 00:08: [io 0x0400-0x041f] [ 0.098971] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled] [ 0.098997] pnp 00:08: disabling [io 0x0010-0x001f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.099000] pnp 00:08: disabling [io 0x0022-0x003f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.099003] pnp 00:08: disabling [io 0x0044-0x005f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.099006] pnp 00:08: disabling [io 0x0062-0x0063] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.099009] pnp 00:08: disabling [io 0x0065-0x006f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.099011] pnp 00:08: disabling [io 0x0072-0x007f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.099014] pnp 00:08: disabling [io 0x0080] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.099017] pnp 00:08: disabling [io 0x0084-0x0086] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.099019] pnp 00:08: disabling [io 0x0088] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.099022] pnp 00:08: disabling [io 0x008c-0x008e] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.099025] pnp 00:08: disabling [io 0x0090-0x009f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.099028] pnp 00:08: disabling [io 0x00a2-0x00bf] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.099030] pnp 00:08: disabling [io 0x00e0-0x00ef] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.099061] system 00:08: [io 0x03e1-0x03e7] has been reserved [ 0.099064] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.099067] system 00:08: [io 0x0800-0x087f] has been reserved [ 0.099069] system 00:08: [io 0x0400-0x041f] has been reserved [ 0.099073] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.099132] pnp 00:09: [mem 0xfec00000-0xfec00fff] [ 0.099134] pnp 00:09: [mem 0xfee00000-0xfee00fff] [ 0.099137] pnp 00:09: [mem 0xfff80000-0xffffffff] [ 0.099175] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.099178] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.099181] system 00:09: [mem 0xfff80000-0xffffffff] has been reserved [ 0.099184] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.099682] pnp 00:0a: [mem 0x00000000-0x0009ffff] [ 0.099684] pnp 00:0a: [mem 0x000c0000-0x000dffff] [ 0.099689] pnp 00:0a: [mem 0x000e0000-0x000fffff] [ 0.099691] pnp 00:0a: [mem 0x00100000-0x3ffeffff] [ 0.099693] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.099698] pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x01ffffff pref] [ 0.099701] pnp 00:0a: disabling [mem 0x000c0000-0x000dffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x01ffffff pref] [ 0.099704] pnp 00:0a: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x01ffffff pref] [ 0.099708] pnp 00:0a: disabling [mem 0x00100000-0x3ffeffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x01ffffff pref] [ 0.099754] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.099877] pnp: PnP ACPI: found 11 devices [ 0.099878] ACPI: ACPI bus type pnp unregistered [ 0.105922] Switching to clocksource acpi_pm [ 0.105977] pci 0000:00:11.6: BAR 0: assigned [io 0x1000-0x10ff] [ 0.105984] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.105988] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.105993] pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbffffff] [ 0.105996] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xfaffffff pref] [ 0.106010] pci 0000:00:01.0: setting latency timer to 64 [ 0.106013] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.106016] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.106018] pci_bus 0000:00: resource 6 [mem 0x40000000-0xfcffffffff] [ 0.106021] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.106024] pci_bus 0000:01: resource 1 [mem 0xfbd00000-0xfbffffff] [ 0.106026] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xfaffffff pref] [ 0.106074] NET: Registered protocol family 2 [ 0.106154] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.106566] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.107913] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.107913] TCP: Hash tables configured (established 131072 bind 65536) [ 0.107913] TCP: reno registered [ 0.107913] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.107913] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.107913] NET: Registered protocol family 1 [ 0.107913] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.132047] pci 0000:01:00.0: Boot video device [ 0.132052] PCI: CLS 64 bytes, default 64 [ 0.132138] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0282] [ 0.133539] Trying to unpack rootfs image as initramfs... [ 2.624183] agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xce000000 [ 2.624569] audit: initializing netlink socket (disabled) [ 2.624583] type=2000 audit(1341746533.623:1): initialized [ 2.649244] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.650893] VFS: Disk quotas dquot_6.5.2 [ 2.650946] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.651463] fuse init (API version 7.19) [ 2.651543] msgmni has been set to 1953 [ 2.651856] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.651882] io scheduler noop registered [ 2.651884] io scheduler deadline registered [ 2.651913] io scheduler cfq registered (default) [ 2.652097] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.652120] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.652241] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 2.652247] ACPI: Power Button [PWRB] [ 2.652290] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 2.652293] ACPI: Sleep Button [SLPB] [ 2.652330] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.652332] ACPI: Power Button [PWRF] [ 2.655768] GHES: HEST is not enabled! [ 2.655853] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.656995] Linux agpgart interface v0.103 [ 2.658459] brd: module loaded [ 2.659249] loop: module loaded [ 2.659861] Fixed MDIO Bus: probed [ 2.659881] tun: Universal TUN/TAP device driver, 1.6 [ 2.659882] tun: (C) 1999-2004 Max Krasnyansky [ 2.659930] PPP generic driver version 2.4.2 [ 2.659973] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.660067] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 2.660077] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 2.660138] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfbc00000 [ 2.672037] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 2.672202] hub 1-0:1.0: USB hub found [ 2.672208] hub 1-0:1.0: 8 ports detected [ 2.672318] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.672341] uhci_hcd: USB Universal Host Controller Interface driver [ 2.676167] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 2.676181] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 2.676208] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c400 [ 2.676386] hub 2-0:1.0: USB hub found [ 2.676392] hub 2-0:1.0: 2 ports detected [ 2.680071] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 2.680085] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 2.680113] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c800 [ 2.680269] hub 3-0:1.0: USB hub found [ 2.680274] hub 3-0:1.0: 2 ports detected [ 2.680406] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 2.680413] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 2.680432] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d000 [ 2.680554] hub 4-0:1.0: USB hub found [ 2.680558] hub 4-0:1.0: 2 ports detected [ 2.684078] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 2.684092] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 2.684121] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d400 [ 2.684281] hub 5-0:1.0: USB hub found [ 2.684286] hub 5-0:1.0: 2 ports detected [ 2.684423] usbcore: registered new interface driver libusual [ 2.684456] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.684458] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.684635] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.684726] mousedev: PS/2 mouse device common for all mice [ 2.684870] rtc_cmos 00:02: RTC can wake from S4 [ 2.685042] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.685092] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 2.685179] device-mapper: uevent: version 1.0.3 [ 2.685243] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 2.685251] cpuidle: using governor ladder [ 2.685253] cpuidle: using governor menu [ 2.685255] EFI Variables Facility v0.08 2004-May-17 [ 2.685487] ashmem: initialized [ 2.685602] TCP: cubic registered [ 2.685726] NET: Registered protocol family 10 [ 2.685954] NET: Registered protocol family 17 [ 2.685964] Key type dns_resolver registered [ 2.686081] PM: Hibernation image not present or could not be loaded. [ 2.686095] registered taskstats version 1 [ 2.702651] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 4.164003] [sched_delayed] sched: RT throttling activated [ 4.196100] Freeing initrd memory: 15296k freed [ 4.207307] Key type trusted registered [ 4.210025] Key type encrypted registered [ 4.212923] Magic number: 4:594:377 [ 4.212983] acpi PNP0700:00: hash matches [ 4.213034] rtc_cmos 00:02: setting system clock to 2012-07-08 11:22:16 UTC (1341746536) [ 4.213075] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ (1 cpu cores) (version 2.20.00) [ 4.213129] powernow-k8: fid 0xe (2200 MHz), vid 0x2 [ 4.213131] powernow-k8: fid 0xc (2000 MHz), vid 0x6 [ 4.213132] powernow-k8: fid 0xa (1800 MHz), vid 0xa [ 4.213134] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 [ 4.213173] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 4.213174] EDD information not available. [ 4.214944] Freeing unused kernel memory: 924k freed [ 4.215361] Write protecting the kernel read-only data: 12288k [ 4.220905] Freeing unused kernel memory: 1524k freed [ 4.225766] Freeing unused kernel memory: 1144k freed [ 4.252109] udevd[95]: starting version 175 [ 4.404130] skge 0000:00:0a.0: PCI: Disallowing DAC for device [ 4.404165] skge: 1.14 addr 0xfba00000 irq 17 chip Yukon-Lite rev 7 [ 4.404372] skge 0000:00:0a.0: eth0: addr 00:11:2f:87:e0:e6 [ 4.408895] sata_via 0000:00:0f.0: version 2.6 [ 4.408942] sata_via 0000:00:0f.0: routed to hard irq line 10 [ 4.412114] scsi0 : sata_via [ 4.412241] scsi1 : sata_via [ 4.412285] ata1: SATA max UDMA/133 cmd 0xc000 ctl 0xb800 bmdma 0xa800 irq 20 [ 4.412287] ata2: SATA max UDMA/133 cmd 0xb400 ctl 0xb000 bmdma 0xa808 irq 20 [ 4.415234] pata_via 0000:00:0f.1: version 0.3.4 [ 4.418332] scsi2 : pata_via [ 4.419837] scsi3 : pata_via [ 4.421201] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 4.421204] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 4.432072] usb 1-5: new high-speed USB device number 3 using ehci_hcd [ 4.465481] Floppy drive(s): fd0 is 1.44M [ 4.466446] [drm] Initialized drm 1.1.0 20060810 [ 4.483939] FDC 0 is a post-1991 82077 [ 4.616043] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.892366] ata1.00: ATA-6: ST380013AS, 3.19, max UDMA/133 [ 4.892369] ata1.00: 156301488 sectors, multi 16: LBA48 [ 4.908576] ata1.00: configured for UDMA/133 [ 4.908707] scsi 0:0:0:0: Direct-Access ATA ST380013AS 3.19 PQ: 0 ANSI: 5 [ 4.909031] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 4.909080] sd 0:0:0:0: [sda] Write Protect is off [ 4.909083] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.909104] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.909649] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.929140] sda: sda1 [ 4.929400] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.011142] Initializing USB Mass Storage driver... [ 5.011238] usb-storage 1-5:1.0: Quirks match for vid 090c pid 6000: 100000 [ 5.011261] scsi4 : usb-storage 1-5:1.0 [ 5.011336] usbcore: registered new interface driver usb-storage [ 5.011338] USB Mass Storage support registered. [ 5.112036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.248014] usb 2-2: new low-speed USB device number 2 using uhci_hcd [ 5.388517] ata2.00: ATA-6: ST380013AS, 3.19, max UDMA/133 [ 5.388520] ata2.00: 156301488 sectors, multi 16: LBA48 [ 5.404486] ata2.00: configured for UDMA/133 [ 5.404611] scsi 1:0:0:0: Direct-Access ATA ST380013AS 3.19 PQ: 0 ANSI: 5 [ 5.404803] sd 1:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 5.404851] sd 1:0:0:0: [sdb] Write Protect is off [ 5.404854] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.404875] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.405136] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 5.437519] sdb: sdb1 sdb2 < sdb5 sdb6 > [ 5.437901] sd 1:0:0:0: [sdb] Attached SCSI disk [ 5.568341] ata4.00: ATAPI: LITE-ON DVDRW SOHW-1633S, BS0S, max UDMA/66 [ 5.584215] ata4.00: configured for UDMA/66 [ 5.586164] scsi 3:0:0:0: CD-ROM LITE-ON DVDRW SOHW-1633S BS0S PQ: 0 ANSI: 5 [ 5.587828] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 5.587831] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.587937] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 5.587995] sr 3:0:0:0: Attached scsi generic sg2 type 5 [ 5.609285] [drm] radeon defaulting to kernel modesetting. [ 5.609289] [drm] radeon kernel modesetting enabled. [ 5.609826] [drm] initializing kernel modesetting (RV350 0x1002:0x4152 0x1545:0x7C29). [ 5.609843] [drm] register mmio base: 0xFBE00000 [ 5.609844] [drm] register mmio size: 65536 [ 5.610572] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge [ 5.613527] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode [ 5.613597] radeon 0000:01:00.0: putting AGP V3 device into 8x mode [ 5.613605] radeon 0000:01:00.0: GTT: 32M 0xCE000000 - 0xCFFFFFFF [ 5.613609] [drm] Generation 2 PCI interface, using max accessible memory [ 5.613614] radeon 0000:01:00.0: VRAM: 256M 0x00000000D0000000 - 0x00000000DFFFFFFF (256M used) [ 5.613627] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 5.613628] [drm] Driver supports precise vblank timestamp query. [ 5.613664] [drm] radeon: irq initialized. [ 5.613797] [drm] Detected VRAM RAM=256M, BAR=256M [ 5.613801] [drm] RAM width 128bits DDR [ 5.615582] [TTM] Zone kernel: Available graphics memory: 509472 kiB [ 5.615586] [TTM] Initializing pool allocator [ 5.615591] [TTM] Initializing DMA pool allocator [ 5.615619] [drm] radeon: 256M of VRAM memory ready [ 5.615621] [drm] radeon: 32M of GTT memory ready. [ 5.615666] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 5.617812] radeon 0000:01:00.0: WB disabled [ 5.617816] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000ce000000 and cpu addr 0xffffc90000186000 [ 5.617865] [drm] Loading R300 Microcode [ 5.618917] usbcore: registered new interface driver usbhid [ 5.618921] usbhid: USB HID core driver [ 5.624733] [drm] radeon: ring at 0x00000000CE001000 [ 5.624755] [drm] ring test succeeded in 1 usecs [ 5.626993] [drm] ib test succeeded in 0 usecs [ 5.627186] [drm] Radeon Display Connectors [ 5.627188] [drm] Connector 0: [ 5.627189] [drm] VGA-1 [ 5.627191] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 5.627192] [drm] Encoders: [ 5.627194] [drm] CRT1: INTERNAL_DAC1 [ 5.627195] [drm] Connector 1: [ 5.627196] [drm] DVI-I-1 [ 5.627198] [drm] HPD1 [ 5.627199] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 5.627200] [drm] Encoders: [ 5.627201] [drm] CRT2: INTERNAL_DAC2 [ 5.627203] [drm] DFP1: INTERNAL_TMDS1 [ 5.627204] [drm] Connector 2: [ 5.627205] [drm] SVIDEO-1 [ 5.627206] [drm] Encoders: [ 5.627207] [drm] TV1: INTERNAL_DAC2 [ 5.637388] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input4 [ 5.637625] hid-generic 0003:046D:C50A.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-2/input0 [ 5.756710] [drm] fb mappable at 0xD0040000 [ 5.756714] [drm] vram apper at 0xD0000000 [ 5.756715] [drm] size 5242880 [ 5.756716] [drm] fb depth is 24 [ 5.756718] [drm] pitch is 5120 [ 5.756839] fbcon: radeondrmfb (fb0) is primary device [ 5.886891] Console: switching to colour frame buffer device 160x64 [ 5.965593] fb0: radeondrmfb frame buffer device [ 5.965595] drm: registered panic notifier [ 5.965819] [drm] Initialized radeon 2.17.0 20080528 for 0000:01:00.0 on minor 0 [ 6.010816] scsi 4:0:0:0: Direct-Access Generic 6000 PQ: 0 ANSI: 0 CCS [ 6.012447] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 6.012680] sd 4:0:0:0: [sdc] 3842048 512-byte logical blocks: (1.96 GB/1.83 GiB) [ 6.013176] sd 4:0:0:0: [sdc] Write Protect is off [ 6.013181] sd 4:0:0:0: [sdc] Mode Sense: 4b 00 00 08 [ 6.013677] sd 4:0:0:0: [sdc] No Caching mode page present [ 6.013680] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 6.016303] sd 4:0:0:0: [sdc] No Caching mode page present [ 6.016309] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 6.024826] sdc: sdc1 [ 6.027051] sd 4:0:0:0: [sdc] No Caching mode page present [ 6.027057] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 6.027060] sd 4:0:0:0: [sdc] Attached SCSI removable disk [ 8.312177] xor: automatically using best checksumming function: [ 8.352007] generic_sse: 7091.000 MB/sec [ 8.357079] device-mapper: dm-raid45: initialized v0.2594b [ 8.498935] fstype: sending ioctl 540f to a partition! [ 8.498940] fstype: sending ioctl 540f to a partition! [ 8.801405] fstype: sending ioctl 540f to a partition! [ 8.801411] fstype: sending ioctl 540f to a partition! [ 12.261518] fstype: sending ioctl 540f to a partition! [ 12.261524] fstype: sending ioctl 540f to a partition! [ 12.273880] fstype: sending ioctl 540f to a partition! [ 12.273886] fstype: sending ioctl 540f to a partition! [ 12.420479] fstype: sending ioctl 540f to a partition! [ 12.420486] fstype: sending ioctl 540f to a partition! [ 12.516956] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 12.519705] ISO 9660 Extensions: RRIP_1991A [ 12.550905] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 23.574516] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.653196] udevd[1300]: starting version 175 [ 23.666332] Adding 2053116k swap on /dev/sdb5. Priority:-1 extents:1 across:2053116k [ 24.077338] Bluetooth: Core ver 2.16 [ 24.077425] NET: Registered protocol family 31 [ 24.077427] Bluetooth: HCI device and connection manager initialized [ 24.077429] Bluetooth: HCI socket layer initialized [ 24.077431] Bluetooth: L2CAP socket layer initialized [ 24.077442] Bluetooth: SCO socket layer initialized [ 24.096799] lp: driver loaded but no devices found [ 24.120408] ppdev: user-space parallel port driver [ 24.122748] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.122753] Bluetooth: BNEP filters: protocol multicast [ 24.676377] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 24.750028] MCE: In-kernel MCE decoding enabled. [ 24.862680] EDAC MC: Ver: 2.1.0 [ 24.875933] device-mapper: multipath: version 1.4.0 loaded [ 24.901617] AMD64 EDAC driver v3.4.0 [ 24.908176] EDAC amd64: DRAM ECC enabled. [ 24.908185] EDAC amd64: K8 revE or earlier detected (node 0). [ 24.916053] EDAC amd64: CS0: Double data rate SDRAM [ 24.916058] EDAC amd64: CS1: Double data rate SDRAM [ 24.916185] EDAC MC0: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:18.2 [ 24.916276] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) [ 24.967916] cfg80211: Calling CRDA to update world regulatory domain [ 25.090327] microcode: AMD CPU family 0xf not supported [ 25.918726] init: failsafe main process (1607) killed by TERM signal [ 26.171200] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 26.171205] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 26.171207] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 26.171209] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 26.171211] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 26.171213] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 26.171214] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 26.171216] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 26.171218] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 26.171220] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 26.171226] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 26.171228] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 26.171230] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 26.171232] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 26.171233] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 26.171235] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 26.171237] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 26.171239] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 26.171241] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 26.171243] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 26.171244] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 26.171246] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 26.171248] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 26.171250] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 26.171252] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 26.171253] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 26.171255] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 26.171257] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 26.246994] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 26.247240] Registered led device: rt2500pci-phy0::radio [ 26.247257] Registered led device: rt2500pci-phy0::quality [ 27.287367] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 [ 27.288011] IP: [] __netif_schedule+0xe/0x70 [ 27.288011] PGD 3927f067 PUD 37fed067 PMD 0 [ 27.288011] Oops: 0002 [#1] SMP [ 27.288011] CPU 0 [ 27.288011] Modules linked in: [ 27.288011] snd_via82xx_modem(+) gameport(+) snd_ac97_codec ac97_bus snd_pcm snd_mpu401_uart arc4 snd_seq_midi rt2500pci rt2x00pci snd_rawmidi rt2x00lib snd_seq_midi_event mac80211 snd_seq snd_timer snd_seq_device snd cfg80211 amd64_edac_mod dm_multipath edac_core serio_raw scsi_dh eeprom_93cx6 i2c_viapro k8temp edac_mce_amd snd_page_alloc soundcore shpchp mac_hid parport_pc bnep ppdev bluetooth lp parport squashfs overlayfs nls_utf8 isofs dm_raid45 xor dm_mirror dm_region_hash dm_log hid_generic radeon usbhid ttm drm_kms_helper hid usb_storage drm floppy i2c_algo_bit pata_via sata_via skge [ 27.288011] [ 27.288011] Pid: 1730, comm: NetworkManager Not tainted 3.5.0-3-generic #3-Ubuntu To Be Filled By O.E.M. To Be Filled By O.E.M./A8V Deluxe [ 27.288011] RIP: 0010:[] [] __netif_schedule+0xe/0x70 [ 27.288011] RSP: 0018:ffff8800374b54d8 EFLAGS: 00010096 [ 27.288011] RAX: ffff880039506140 RBX: ffff88003a5c07c0 RCX: ffff88003be74580 [ 27.288011] RDX: 00000000ffffffff RSI: 0000000000000086 RDI: 0000000000000000 [ 27.288011] RBP: ffff8800374b54e8 R08: ffff88003ee13980 R09: 0000000000000000 [ 27.288011] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000140 [ 27.288011] R13: ffff88003a5c07c1 R14: 0000000000000000 R15: ffff88003be752b8 [ 27.288011] FS: 00007f2565a85800(0000) GS:ffff88003ee00000(0000) knlGS:0000000000000000 [ 27.288011] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.288011] CR2: 0000000000000080 CR3: 0000000039230000 CR4: 00000000000007f0 [ 27.288011] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 27.288011] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 27.288011] Process NetworkManager (pid: 1730, threadinfo ffff8800374b4000, task ffff880038695c00) [ 27.288011] Stack: [ 27.288011] ffff8800374b5508 ffff88003a5c07c0 ffff8800374b5548 ffffffffa0354675 [ 27.288011] ffff88003cb81cec ffff88003be74580 ffff8800374b5528 ffff88003a5c07c0 [ 27.288011] 0000000000000086 ffff88003be746f8 0000000000000000 0000000000000286 [ 27.288011] Call Trace: [ 27.288011] [] ieee80211_propagate_queue_wake+0x105/0x110 [mac80211] [ 27.288011] [] __ieee80211_wake_queue+0xf2/0x110 [mac80211] [ 27.288011] [] ieee80211_wake_queue_by_reason+0x4a/0x70 [mac80211] [ 27.288011] [] ieee80211_wake_queue+0x10/0x20 [mac80211] [ 27.288011] [] rt2x00queue_unpause_queue+0x3f/0x60 [rt2x00lib] [ 27.288011] [] rt2x00queue_flush_queue+0x72/0xc0 [rt2x00lib] [ 27.288011] [] rt2x00mac_flush+0x38/0x70 [rt2x00lib] [ 27.288011] [] __ieee80211_recalc_idle+0x278/0x2f0 [mac80211] [ 27.288011] [] ieee80211_do_open+0x1bb/0xa90 [mac80211] [ 27.288011] [] ieee80211_open+0x6d/0x80 [mac80211] [ 27.288011] [] __dev_open+0x9f/0xf0 [ 27.288011] [] __dev_change_flags+0xa1/0x180 [ 27.288011] [] dev_change_flags+0x28/0x70 [ 27.288011] [] do_setlink+0x357/0x9e0 [ 27.288011] [] ? nla_parse+0x31/0xe0 [ 27.288011] [] ? nla_parse+0x31/0xe0 [ 27.288011] [] rtnl_newlink+0x37e/0x560 [ 27.288011] [] ? apparmor_capable+0x26/0x90 [ 27.288011] [] rtnetlink_rcv_msg+0x114/0x2f0 [ 27.288011] [] ? __rtnl_unlock+0x20/0x20 [ 27.288011] [] netlink_rcv_skb+0xa1/0xb0 [ 27.288011] [] rtnetlink_rcv+0x25/0x40 [ 27.288011] [] netlink_unicast+0x19d/0x220 [ 27.288011] [] netlink_sendmsg+0x2bd/0x330 [ 27.288011] [] sock_sendmsg+0xf8/0x130 [ 27.288011] [] ? sock_recvmsg+0xfd/0x130 [ 27.288011] [] ? __do_fault+0x411/0x520 [ 27.288011] [] ? move_addr_to_kernel+0x5a/0xc0 [ 27.288011] [] ? verify_iovec+0x56/0xd0 [ 27.288011] [] __sys_sendmsg+0x3ac/0x3c0 [ 27.288011] [] ? handle_mm_fault+0x259/0x320 [ 27.288011] [] ? __dequeue_entity+0x2f/0x50 [ 27.288011] [] ? __switch_to+0x16e/0x420 [ 27.288011] [] ? finish_task_switch+0x4a/0xf0 [ 27.288011] [] sys_sendmsg+0x49/0x90 [ 27.288011] [] system_call_fastpath+0x16/0x1b [ 27.288011] Code: 00 00 00 83 ee 04 48 83 c7 04 e9 58 ff ff ff 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 <3e> 0f ba af 80 00 00 00 00 19 c0 85 c0 75 4c 9c 58 66 66 90 66 [ 27.288011] RIP [] __netif_schedule+0xe/0x70 [ 27.288011] RSP [ 27.288011] CR2: 0000000000000080 [ 27.683851] ---[ end trace 7a61a837fd7ffaa0 ]--- [ 27.777608] snd_via82xx_modem 0000:00:11.6: enabling device (0000 -> 0001) [ 28.177303] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 28.177309] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.177311] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 28.177313] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.177315] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 28.177317] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.177318] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 28.177320] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.177322] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 28.177324] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.177326] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 28.177327] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.177329] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 28.177331] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.177333] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 28.177335] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.177336] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 28.177338] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.177340] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 28.177342] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.177343] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 28.177345] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.177347] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 28.177349] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 28.177350] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 28.177352] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 28.177354] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 28.177356] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 28.177358] cfg80211: World regulatory domain updated: [ 28.177360] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 28.177362] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.177364] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 28.177365] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 28.177367] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.177369] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.528386] snd_via82xx_modem 0000:00:11.6: setting latency timer to 64 [ 29.032287] snd_via82xx_modem: probe of 0000:00:11.6 failed with error -13 [ 29.036322] snd_via82xx 0000:00:11.5: setting latency timer to 64 [ 38.081469] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 38.082093] ISOFS: changing to secondary root [ 41.024034] [ 41.024040] floppy driver state [ 41.024041] ------------------- [ 41.024058] now=4294902552 last interrupt=4294902532 diff=20 last called handler=recal_interrupt [floppy] [ 41.024060] timeout_message=floppy start [ 41.024061] last output bytes: [ 41.024062] 3 80 4294902259 [ 41.024064] c1 90 4294902259 [ 41.024065] 10 90 4294902259 [ 41.024066] 7 80 4294902259 [ 41.024068] 0 90 4294902259 [ 41.024069] 8 81 4294902339 [ 41.024070] 3 80 4294902345 [ 41.024071] d1 90 4294902345 [ 41.024073] a 90 4294902345 [ 41.024074] 7 80 4294902345 [ 41.024075] 0 90 4294902345 [ 41.024076] 8 81 4294902446 [ 41.024078] 3 80 4294902451 [ 41.024079] c1 90 4294902451 [ 41.024080] 10 90 4294902451 [ 41.024082] 7 80 4294902451 [ 41.024083] 0 90 4294902451 [ 41.024084] 8 81 4294902532 [ 41.024085] 7 80 4294902532 [ 41.024086] 0 90 4294902532 [ 41.024088] last result at 4294902532 [ 41.024089] last redo_fd_request at 4294902532 [ 41.024091] 70 00 p. [ 41.024102] status=81 [ 41.024103] fdc_busy=1 [ 41.024107] do_floppy=recal_interrupt [floppy] [ 41.024108] cont=ffffffffa0092ba0 [ 41.024109] current_req=ffff88003aabe170 [ 41.024110] command_status=-1 [ 41.024111] [ 41.024117] floppy0: floppy timeout called [ 41.024122] end_request: I/O error, dev fd0, sector 0 [ 53.188533] end_request: I/O error, dev fd0, sector 0 [ 53.188541] Buffer I/O error on device fd0, logical block 0 [ 65.368485] end_request: I/O error, dev fd0, sector 0 [ 65.368491] Buffer I/O error on device fd0, logical block 0 [ 77.536228] end_request: I/O error, dev fd0, sector 0 [ 77.536236] Buffer I/O error on device fd0, logical block 0 [ 89.708337] end_request: I/O error, dev fd0, sector 0 [ 89.708346] Buffer I/O error on device fd0, logical block 0 [ 101.876855] end_request: I/O error, dev fd0, sector 0 [ 101.876862] Buffer I/O error on device fd0, logical block 0 [ 114.044466] end_request: I/O error, dev fd0, sector 0 [ 114.044473] Buffer I/O error on device fd0, logical block 0 [ 126.212487] end_request: I/O error, dev fd0, sector 0 [ 126.212494] Buffer I/O error on device fd0, logical block 0 [ 138.381159] end_request: I/O error, dev fd0, sector 0 [ 138.381167] Buffer I/O error on device fd0, logical block 0 [ 150.548463] end_request: I/O error, dev fd0, sector 0 [ 150.548471] Buffer I/O error on device fd0, logical block 0 [ 162.720385] end_request: I/O error, dev fd0, sector 0 [ 162.720392] Buffer I/O error on device fd0, logical block 0 [ 174.888378] end_request: I/O error, dev fd0, sector 0 [ 174.888385] Buffer I/O error on device fd0, logical block 0 [ 187.044404] end_request: I/O error, dev fd0, sector 0 [ 187.044411] Buffer I/O error on device fd0, logical block 0 [ 199.212397] end_request: I/O error, dev fd0, sector 0 [ 199.212405] Buffer I/O error on device fd0, logical block 0 [ 211.380299] end_request: I/O error, dev fd0, sector 0 [ 211.380307] Buffer I/O error on device fd0, logical block 0 [ 223.532230] end_request: I/O error, dev fd0, sector 0 [ 223.532238] Buffer I/O error on device fd0, logical block 0 [ 235.693134] end_request: I/O error, dev fd0, sector 0 [ 235.693143] Buffer I/O error on device fd0, logical block 0 [ 247.860396] end_request: I/O error, dev fd0, sector 0 [ 247.860403] Buffer I/O error on device fd0, logical block 0 [ 260.028379] end_request: I/O error, dev fd0, sector 0 [ 260.028386] Buffer I/O error on device fd0, logical block 0 [ 272.196356] end_request: I/O error, dev fd0, sector 0 [ 272.196362] Buffer I/O error on device fd0, logical block 0 [ 284.364328] end_request: I/O error, dev fd0, sector 0 [ 284.364334] Buffer I/O error on device fd0, logical block 0 [ 296.520357] end_request: I/O error, dev fd0, sector 0 [ 296.520364] Buffer I/O error on device fd0, logical block 0 [ 308.688364] end_request: I/O error, dev fd0, sector 0 [ 308.688370] Buffer I/O error on device fd0, logical block 0 [ 320.856348] end_request: I/O error, dev fd0, sector 0 [ 320.856354] Buffer I/O error on device fd0, logical block 0 [ 333.016489] end_request: I/O error, dev fd0, sector 0 [ 333.016496] Buffer I/O error on device fd0, logical block 0 [ 345.188587] end_request: I/O error, dev fd0, sector 0 [ 345.188593] Buffer I/O error on device fd0, logical block 0 [ 357.352473] end_request: I/O error, dev fd0, sector 0 [ 357.352479] Buffer I/O error on device fd0, logical block 0 [ 369.544343] end_request: I/O error, dev fd0, sector 0 [ 369.544350] Buffer I/O error on device fd0, logical block 0 [ 381.736221] end_request: I/O error, dev fd0, sector 0 [ 381.736227] Buffer I/O error on device fd0, logical block 0 [ 393.900448] end_request: I/O error, dev fd0, sector 0 [ 393.900454] Buffer I/O error on device fd0, logical block 0 [ 406.068441] end_request: I/O error, dev fd0, sector 0 [ 406.068448] Buffer I/O error on device fd0, logical block 0 [ 418.236438] end_request: I/O error, dev fd0, sector 0 [ 418.236445] Buffer I/O error on device fd0, logical block 0 [ 430.404438] end_request: I/O error, dev fd0, sector 0 [ 430.404445] Buffer I/O error on device fd0, logical block 0 [ 442.572414] end_request: I/O error, dev fd0, sector 0 [ 442.572421] Buffer I/O error on device fd0, logical block 0 [ 454.740397] end_request: I/O error, dev fd0, sector 0 [ 454.740403] Buffer I/O error on device fd0, logical block 0 [ 466.908401] end_request: I/O error, dev fd0, sector 0 [ 466.908407] Buffer I/O error on device fd0, logical block 0 [ 479.076376] end_request: I/O error, dev fd0, sector 0 [ 479.076383] Buffer I/O error on device fd0, logical block 0 [ 491.244371] end_request: I/O error, dev fd0, sector 0 [ 491.244378] Buffer I/O error on device fd0, logical block 0 [ 503.416497] end_request: I/O error, dev fd0, sector 0 [ 503.416503] Buffer I/O error on device fd0, logical block 0 [ 515.592393] end_request: I/O error, dev fd0, sector 0 [ 515.592400] Buffer I/O error on device fd0, logical block 0 [ 527.760372] end_request: I/O error, dev fd0, sector 0 [ 527.760378] Buffer I/O error on device fd0, logical block 0 [ 539.928359] end_request: I/O error, dev fd0, sector 0 [ 539.928366] Buffer I/O error on device fd0, logical block 0 [ 552.096331] end_request: I/O error, dev fd0, sector 0 [ 552.096338] Buffer I/O error on device fd0, logical block 0 [ 564.252356] end_request: I/O error, dev fd0, sector 0 [ 564.252363] Buffer I/O error on device fd0, logical block 0 [ 576.412494] end_request: I/O error, dev fd0, sector 0 [ 576.412501] Buffer I/O error on device fd0, logical block 0 [ 588.584593] end_request: I/O error, dev fd0, sector 0 [ 588.584600] Buffer I/O error on device fd0, logical block 0 [ 591.592014] [ 591.592019] floppy driver state [ 591.592020] ------------------- [ 591.592037] now=4295040194 last interrupt=4295040160 diff=34 last called handler=recal_interrupt [floppy] [ 591.592038] timeout_message=floppy start [ 591.592039] last output bytes: [ 591.592041] 7 80 4295039806 [ 591.592042] 0 90 4295039806 [ 591.592043] 8 81 4295039887 [ 591.592045] 3 80 4295039892 [ 591.592046] d1 90 4295039892 [ 591.592047] a 90 4295039892 [ 591.592049] 7 80 4295039892 [ 591.592050] 0 90 4295039892 [ 591.592051] 8 81 4295039993 [ 591.592052] 3 80 4295039998 [ 591.592054] c1 90 4295039998 [ 591.592055] 10 90 4295039998 [ 591.592056] 7 80 4295039998 [ 591.592057] 0 90 4295039998 [ 591.592059] 8 81 4295040078 [ 591.592060] 7 80 4295040079 [ 591.592061] 0 90 4295040079 [ 591.592062] 8 81 4295040160 [ 591.592064] 7 80 4295040160 [ 591.592065] 0 90 4295040160 [ 591.592066] last result at 4295040160 [ 591.592067] last redo_fd_request at 4295040160 [ 591.592069] 70 00 p. [ 591.592080] status=81 [ 591.592081] fdc_busy=1 [ 591.592085] do_floppy=recal_interrupt [floppy] [ 591.592086] cont=ffffffffa0092ba0 [ 591.592087] current_req=ffff88003aabe170 [ 591.592089] command_status=-1 [ 591.592089] [ 591.592094] floppy0: floppy timeout called [ 591.592097] end_request: I/O error, dev fd0, sector 0 [ 594.608018] [ 594.608023] floppy driver state [ 594.608024] ------------------- [ 594.608040] now=4295040948 last interrupt=4295040918 diff=30 last called handler=recal_interrupt [floppy] [ 594.608042] timeout_message=floppy start [ 594.608043] last output bytes: [ 594.608044] 3 80 4295040645 [ 594.608046] c1 90 4295040645 [ 594.608047] 10 90 4295040645 [ 594.608048] 7 80 4295040645 [ 594.608050] 0 90 4295040645 [ 594.608051] 8 81 4295040725 [ 594.608052] 3 80 4295040731 [ 594.608053] d1 90 4295040731 [ 594.608055] a 90 4295040731 [ 594.608056] 7 80 4295040731 [ 594.608057] 0 90 4295040731 [ 594.608058] 8 81 4295040832 [ 594.608060] 3 80 4295040837 [ 594.608061] c1 90 4295040837 [ 594.608062] 10 90 4295040837 [ 594.608063] 7 80 4295040837 [ 594.608065] 0 90 4295040837 [ 594.608066] 8 81 4295040918 [ 594.608067] 7 80 4295040918 [ 594.608068] 0 90 4295040918 [ 594.608069] last result at 4295040918 [ 594.608071] last redo_fd_request at 4295040918 [ 594.608073] 70 00 p. [ 594.608084] status=81 [ 594.608085] fdc_busy=1 [ 594.608089] do_floppy=recal_interrupt [floppy] [ 594.608090] cont=ffffffffa0092ba0 [ 594.608091] current_req=ffff88003aabe170 [ 594.608092] command_status=-1 [ 594.608093] [ 594.608098] floppy0: floppy timeout called [ 594.608101] end_request: I/O error, dev fd0, sector 0 [ 606.772489] end_request: I/O error, dev fd0, sector 0 [ 606.772496] Buffer I/O error on device fd0, logical block 0 [ 618.942638] end_request: I/O error, dev fd0, sector 0 [ 618.942645] Buffer I/O error on device fd0, logical block 0 [ 631.104501] end_request: I/O error, dev fd0, sector 0 [ 631.104508] Buffer I/O error on device fd0, logical block 0 [ 643.272474] end_request: I/O error, dev fd0, sector 0 [ 643.272481] Buffer I/O error on device fd0, logical block 0 [ 655.440492] end_request: I/O error, dev fd0, sector 0 [ 655.440499] Buffer I/O error on device fd0, logical block 0 [ 667.612585] end_request: I/O error, dev fd0, sector 0 [ 667.612592] Buffer I/O error on device fd0, logical block 0 [ 679.776474] end_request: I/O error, dev fd0, sector 0 [ 679.776480] Buffer I/O error on device fd0, logical block 0 [ 691.944458] end_request: I/O error, dev fd0, sector 0 [ 691.944465] Buffer I/O error on device fd0, logical block 0 [ 704.112454] end_request: I/O error, dev fd0, sector 0 [ 704.112460] Buffer I/O error on device fd0, logical block 0 [ 716.280451] end_request: I/O error, dev fd0, sector 0 [ 716.280457] Buffer I/O error on device fd0, logical block 0 [ 728.448442] end_request: I/O error, dev fd0, sector 0 [ 728.448449] Buffer I/O error on device fd0, logical block 0 [ 740.617136] end_request: I/O error, dev fd0, sector 0 [ 740.617142] Buffer I/O error on device fd0, logical block 0 [ 752.784458] end_request: I/O error, dev fd0, sector 0 [ 752.784464] Buffer I/O error on device fd0, logical block 0 [ 764.952440] end_request: I/O error, dev fd0, sector 0 [ 764.952447] Buffer I/O error on device fd0, logical block 0 [ 777.120436] end_request: I/O error, dev fd0, sector 0 [ 777.120443] Buffer I/O error on device fd0, logical block 0 [ 789.288437] end_request: I/O error, dev fd0, sector 0 [ 789.288444] Buffer I/O error on device fd0, logical block 0 [ 801.456414] end_request: I/O error, dev fd0, sector 0 [ 801.456420] Buffer I/O error on device fd0, logical block 0 [ 813.624397] end_request: I/O error, dev fd0, sector 0 [ 813.624404] Buffer I/O error on device fd0, logical block 0 [ 825.792383] end_request: I/O error, dev fd0, sector 0 [ 825.792389] Buffer I/O error on device fd0, logical block 0 [ 837.960380] end_request: I/O error, dev fd0, sector 0 [ 837.960387] Buffer I/O error on device fd0, logical block 0 [ 850.128364] end_request: I/O error, dev fd0, sector 0 [ 850.128370] Buffer I/O error on device fd0, logical block 0 [ 862.296377] end_request: I/O error, dev fd0, sector 0 [ 862.296384] Buffer I/O error on device fd0, logical block 0 [ 874.464351] end_request: I/O error, dev fd0, sector 0 [ 874.464358] Buffer I/O error on device fd0, logical block 0 [ 886.624469] end_request: I/O error, dev fd0, sector 0 [ 886.624476] Buffer I/O error on device fd0, logical block 0 [ 898.792450] end_request: I/O error, dev fd0, sector 0 [ 898.792457] Buffer I/O error on device fd0, logical block 0 [ 910.982959] end_request: I/O error, dev fd0, sector 0 [ 910.982966] Buffer I/O error on device fd0, logical block 0 [ 923.156384] end_request: I/O error, dev fd0, sector 0 [ 923.156391] Buffer I/O error on device fd0, logical block 0 [ 935.324387] end_request: I/O error, dev fd0, sector 0 [ 935.324394] Buffer I/O error on device fd0, logical block 0 [ 947.492354] end_request: I/O error, dev fd0, sector 0 [ 947.492360] Buffer I/O error on device fd0, logical block 0 [ 959.660343] end_request: I/O error, dev fd0, sector 0 [ 959.660349] Buffer I/O error on device fd0, logical block 0 [ 971.820478] end_request: I/O error, dev fd0, sector 0 [ 971.820484] Buffer I/O error on device fd0, logical block 0 [ 983.988458] end_request: I/O error, dev fd0, sector 0 [ 983.988463] Buffer I/O error on device fd0, logical block 0 [ 996.156438] end_request: I/O error, dev fd0, sector 0 [ 996.156443] Buffer I/O error on device fd0, logical block 0 [ 1008.324424] end_request: I/O error, dev fd0, sector 0 [ 1008.324430] Buffer I/O error on device fd0, logical block 0 [ 1020.488669] end_request: I/O error, dev fd0, sector 0 [ 1020.488676] Buffer I/O error on device fd0, logical block 0 [ 1032.649152] end_request: I/O error, dev fd0, sector 0 [ 1032.649159] Buffer I/O error on device fd0, logical block 0 [ 1044.816449] end_request: I/O error, dev fd0, sector 0 [ 1044.816454] Buffer I/O error on device fd0, logical block 0 [ 1056.984437] end_request: I/O error, dev fd0, sector 0 [ 1056.984442] Buffer I/O error on device fd0, logical block 0 [ 1069.152421] end_request: I/O error, dev fd0, sector 0 [ 1069.152427] Buffer I/O error on device fd0, logical block 0 [ 1081.320388] end_request: I/O error, dev fd0, sector 0 [ 1081.320395] Buffer I/O error on device fd0, logical block 0 [ 1093.488362] end_request: I/O error, dev fd0, sector 0 [ 1093.488368] Buffer I/O error on device fd0, logical block 0 [ 1105.656359] end_request: I/O error, dev fd0, sector 0 [ 1105.656365] Buffer I/O error on device fd0, logical block 0 [ 1117.816487] end_request: I/O error, dev fd0, sector 0 [ 1117.816492] Buffer I/O error on device fd0, logical block 0 [ 1129.984479] end_request: I/O error, dev fd0, sector 0 [ 1129.984486] Buffer I/O error on device fd0, logical block 0 [ 1142.152475] end_request: I/O error, dev fd0, sector 0 [ 1142.152482] Buffer I/O error on device fd0, logical block 0 [ 1145.160016] [ 1145.160020] floppy driver state [ 1145.160021] ------------------- [ 1145.160038] now=4295178586 last interrupt=4295178551 diff=35 last called handler=recal_interrupt [floppy] [ 1145.160039] timeout_message=floppy start [ 1145.160040] last output bytes: [ 1145.160042] 7 80 4295178198 [ 1145.160043] 0 90 4295178198 [ 1145.160045] 8 81 4295178278 [ 1145.160046] 3 80 4295178283 [ 1145.160047] d1 90 4295178283 [ 1145.160049] a 90 4295178283 [ 1145.160050] 7 80 4295178283 [ 1145.160051] 0 90 4295178283 [ 1145.160053] 8 81 4295178384 [ 1145.160054] 3 80 4295178389 [ 1145.160055] c1 90 4295178389 [ 1145.160056] 10 90 4295178389 [ 1145.160058] 7 80 4295178389 [ 1145.160059] 0 90 4295178389 [ 1145.160060] 8 81 4295178469 [ 1145.160062] 7 80 4295178470 [ 1145.160063] 0 90 4295178470 [ 1145.160064] 8 81 4295178551 [ 1145.160065] 7 80 4295178551 [ 1145.160067] 0 90 4295178551 [ 1145.160068] last result at 4295178551 [ 1145.160069] last redo_fd_request at 4295178551 [ 1145.160071] 70 00 p. [ 1145.160082] status=81 [ 1145.160083] fdc_busy=1 [ 1145.160087] do_floppy=recal_interrupt [floppy] [ 1145.160088] cont=ffffffffa0092ba0 [ 1145.160090] current_req=ffff88003aabe170 [ 1145.160091] command_status=-1 [ 1145.160092] [ 1145.160096] floppy0: floppy timeout called [ 1145.160099] end_request: I/O error, dev fd0, sector 0 [ 1157.676435] end_request: I/O error, dev fd0, sector 2 [ 1157.676456] EXT3-fs (fd0): error: unable to read superblock [ 1160.680014] [ 1160.680017] floppy driver state [ 1160.680018] ------------------- [ 1160.680034] now=4295182466 last interrupt=4295182432 diff=34 last called handler=recal_interrupt [floppy] [ 1160.680035] timeout_message=floppy start [ 1160.680036] last output bytes: [ 1160.680038] 7 80 4295182079 [ 1160.680039] 0 90 4295182079 [ 1160.680041] 8 81 4295182159 [ 1160.680042] 3 80 4295182164 [ 1160.680043] d1 90 4295182164 [ 1160.680044] a 90 4295182164 [ 1160.680046] 7 80 4295182164 [ 1160.680047] 0 90 4295182164 [ 1160.680048] 8 81 4295182265 [ 1160.680049] 3 80 4295182270 [ 1160.680051] c1 90 4295182270 [ 1160.680052] 10 90 4295182270 [ 1160.680053] 7 80 4295182270 [ 1160.680054] 0 90 4295182270 [ 1160.680056] 8 81 4295182350 [ 1160.680057] 7 80 4295182351 [ 1160.680058] 0 90 4295182351 [ 1160.680059] 8 81 4295182432 [ 1160.680061] 7 80 4295182432 [ 1160.680062] 0 90 4295182432 [ 1160.680063] last result at 4295182432 [ 1160.680064] last redo_fd_request at 4295182432 [ 1160.680066] 70 00 p. [ 1160.680077] status=81 [ 1160.680078] fdc_busy=1 [ 1160.680082] do_floppy=recal_interrupt [floppy] [ 1160.680083] cont=ffffffffa0092ba0 [ 1160.680084] current_req=ffff88003aabe170 [ 1160.680086] command_status=-1 [ 1160.680087] [ 1160.680091] floppy0: floppy timeout called [ 1160.680094] end_request: I/O error, dev fd0, sector 0 [ 1173.196432] end_request: I/O error, dev fd0, sector 2 [ 1173.196450] EXT4-fs (fd0): unable to read superblock [ 1176.200012] [ 1176.200016] floppy driver state [ 1176.200017] ------------------- [ 1176.200032] now=4295186346 last interrupt=4295186312 diff=34 last called handler=recal_interrupt [floppy] [ 1176.200033] timeout_message=floppy start [ 1176.200034] last output bytes: [ 1176.200036] 7 80 4295185959 [ 1176.200037] 0 90 4295185959 [ 1176.200039] 8 81 4295186039 [ 1176.200040] 3 80 4295186044 [ 1176.200041] d1 90 4295186044 [ 1176.200042] a 90 4295186044 [ 1176.200044] 7 80 4295186044 [ 1176.200045] 0 90 4295186044 [ 1176.200046] 8 81 4295186145 [ 1176.200047] 3 80 4295186150 [ 1176.200049] c1 90 4295186150 [ 1176.200050] 10 90 4295186150 [ 1176.200051] 7 80 4295186150 [ 1176.200052] 0 90 4295186150 [ 1176.200054] 8 81 4295186230 [ 1176.200055] 7 80 4295186231 [ 1176.200056] 0 90 4295186231 [ 1176.200057] 8 81 4295186312 [ 1176.200059] 7 80 4295186312 [ 1176.200060] 0 90 4295186312 [ 1176.200061] last result at 4295186312 [ 1176.200062] last redo_fd_request at 4295186312 [ 1176.200065] 70 00 p. [ 1176.200075] status=81 [ 1176.200076] fdc_busy=1 [ 1176.200080] do_floppy=recal_interrupt [floppy] [ 1176.200081] cont=ffffffffa0092ba0 [ 1176.200082] current_req=ffff88003aabe170 [ 1176.200084] command_status=-1 [ 1176.200084] [ 1176.200089] floppy0: floppy timeout called [ 1176.200092] end_request: I/O error, dev fd0, sector 0 [ 1179.208013] [ 1179.208016] floppy driver state [ 1179.208017] ------------------- [ 1179.208033] now=4295187098 last interrupt=4295187067 diff=31 last called handler=recal_interrupt [floppy] [ 1179.208035] timeout_message=floppy start [ 1179.208036] last output bytes: [ 1179.208038] 3 80 4295186795 [ 1179.208039] c1 90 4295186795 [ 1179.208041] 10 90 4295186795 [ 1179.208042] 7 80 4295186795 [ 1179.208043] 0 90 4295186795 [ 1179.208045] 8 81 4295186876 [ 1179.208046] 3 80 4295186881 [ 1179.208048] d1 90 4295186881 [ 1179.208049] a 90 4295186881 [ 1179.208051] 7 80 4295186881 [ 1179.208052] 0 90 4295186881 [ 1179.208054] 8 81 4295186982 [ 1179.208055] 3 80 4295186987 [ 1179.208056] c1 90 4295186987 [ 1179.208058] 10 90 4295186987 [ 1179.208059] 7 80 4295186987 [ 1179.208061] 0 90 4295186987 [ 1179.208062] 8 81 4295187067 [ 1179.208064] 7 80 4295187067 [ 1179.208065] 0 90 4295187067 [ 1179.208066] last result at 4295187067 [ 1179.208068] last redo_fd_request at 4295187067 [ 1179.208070] 70 00 p. [ 1179.208081] status=81 [ 1179.208082] fdc_busy=1 [ 1179.208086] do_floppy=recal_interrupt [floppy] [ 1179.208087] cont=ffffffffa0092ba0 [ 1179.208089] current_req=ffff88003aabe170 [ 1179.208090] command_status=-1 [ 1179.208091] [ 1179.208096] floppy0: floppy timeout called [ 1179.208099] end_request: I/O error, dev fd0, sector 0 [ 1179.412247] floppy0: unexpected interrupt [ 1179.412345] floppy0: sensei repl[0]=70 repl[1]=0