[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 3.0.0-1007-linaro-omap (buildd@buttercup) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #9-Ubuntu SMP PREEMPT Mon Sep 26 20:06:36 UTC 2011 (Ubuntu 3.0.0-1007.9-linaro-omap 3.0.0) [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387f [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP3 Beagle Board [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] OMAP3630 ES1.1 (l2cache iva sgx neon isp 192mhz_clk ) [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000 [ 0.000000] On node 0 totalpages: 128000 [ 0.000000] free_area_init_node: node 0, pgdat 806caf80, node_mem_map 80c46000 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 126976 pages, LIFO batch:31 [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] Reprogramming SDRC clock to 332000000 Hz [ 0.000000] PERCPU: Embedded 7 pages/cpu @8104e000 s7168 r8192 d13312 u32768 [ 0.000000] pcpu-alloc: s7168 r8192 d13312 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 126976 [ 0.000000] Kernel command line: splash ro elevator=noop vram=12M omapfb.mode=dvi:1280x720MR-16@60 root=UUID=0fb27777-8508-4794-8ea1-3ea0b9f7163d fixrtc console=ttyO2,115200n8 serialtty=ttyO2 console=tty0 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 500MB = 500MB total [ 0.000000] Memory: 493140k/493140k available, 31148k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xa0800000 - 0xf8000000 (1400 MB) [ 0.000000] lowmem : 0x80000000 - 0xa0000000 ( 512 MB) [ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) [ 0.000000] modules : 0x7f800000 - 0x7fe00000 ( 6 MB) [ 0.000000] .text : 0x80008000 - 0x805f3d90 (6064 kB) [ 0.000000] .init : 0x805f4000 - 0x80647c00 ( 335 kB) [ 0.000000] .data : 0x80648000 - 0x806cce70 ( 532 kB) [ 0.000000] .bss : 0x806cce94 - 0x80c452f4 (5602 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:410 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] omap_hwmod: gpt12_fck: missing clockdomain for gpt12_fck. [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.007385] Calibrating delay loop... 324.52 BogoMIPS (lpj=1265664) [ 0.051177] pid_max: default: 32768 minimum: 301 [ 0.052124] Security Framework initialized [ 0.052307] AppArmor: AppArmor initialized [ 0.052368] Yama: becoming mindful. [ 0.052947] Mount-cache hash table entries: 512 [ 0.060028] CPU: Testing write buffer coherency: ok [ 0.060455] ftrace: allocating 24757 entries in 49 pages [ 0.143371] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.143463] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 0.179229] Brought up 1 CPUs [ 0.179290] SMP: Total of 1 processors activated (324.52 BogoMIPS). [ 0.182098] devtmpfs: initialized [ 0.196746] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_core [ 0.196838] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per [ 0.196899] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup [ 0.211151] omap_hwmod: i2c1: softreset failed (waited 10000 usec) [ 0.223327] omap_hwmod: i2c2: softreset failed (waited 10000 usec) [ 0.235534] omap_hwmod: i2c3: softreset failed (waited 10000 usec) [ 0.242431] print_constraints: dummy: [ 0.243988] NET: Registered protocol family 16 [ 0.245422] GPMC revision 5.0 [ 0.255310] omap_device: omap_gpio.0: new worst case activate latency 0: 122070 [ 0.258514] OMAP GPIO hardware version 2.5 [ 0.260253] OMAP GPIO hardware version 2.5 [ 0.261840] OMAP GPIO hardware version 2.5 [ 0.263793] OMAP GPIO hardware version 2.5 [ 0.265441] OMAP GPIO hardware version 2.5 [ 0.267089] OMAP GPIO hardware version 2.5 [ 0.277069] omap_mux_init: Add partition: #1: core, flags: 0 [ 0.279846] OMAP3 Beagle Rev: xM Ax/Bx [ 0.291809] omap_device: omap_uart.1: new worst case activate latency 0: 30517 [ 0.297668] Found NAND on CS0 [ 0.297729] Registering NAND on CS0 [ 0.298828] gpio_request: gpio--22 (DVI reset) status -22 [ 0.298858] Unable to get DVI reset GPIO [ 0.370544] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.390411] OMAP DMA hardware revision 5.0 [ 0.392211] Serial: AMBA PL011 UART driver [ 0.488067] bio: create slab at 0 [ 0.498107] SCSI subsystem initialized [ 0.500610] libata version 3.00 loaded. [ 0.501342] omap_device: omap2_mcspi.1: new worst case activate latency 0: 30517 [ 0.511688] usbcore: registered new interface driver usbfs [ 0.513031] usbcore: registered new interface driver hub [ 0.514068] usbcore: registered new device driver usb [ 0.518798] omap_device: omap_i2c.1: new worst case activate latency 0: 30517 [ 0.530670] omap_i2c omap_i2c.1: bus 1 rev4.0 at 2600 kHz [ 0.542419] twl4030: PIH (irq 7) chaining IRQs 368..375 [ 0.542633] twl4030: power (irq 373) chaining IRQs 376..383 [ 0.545104] twl4030: gpio (irq 368) chaining IRQs 384..401 [ 0.555053] print_constraints: VUSB1V5: 1500 mV normal standby [ 0.558074] print_constraints: VUSB1V8: 1800 mV normal standby [ 0.560577] print_constraints: VUSB3V1: 3100 mV normal standby [ 0.565551] twl4030_usb twl4030_usb: HW_CONDITIONS 0x40/64; link 0 [ 0.567260] twl4030_usb twl4030_usb: Initialized TWL4030 USB module [ 0.573608] print_constraints: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby [ 0.576660] print_constraints: VDAC: 1800 mV normal standby [ 0.579437] print_constraints: VPLL2: 1800 mV normal standby [ 0.582580] print_constraints: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby [ 0.583343] omap_device: omap_i2c.1: new worst case deactivate latency 0: 30517 [ 0.583648] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz [ 0.595977] NetLabel: Initializing [ 0.596038] NetLabel: domain hash size = 128 [ 0.596069] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.596466] NetLabel: unlabeled traffic allowed by default [ 0.596588] Switching to clocksource 32k_counter [ 0.600708] Switched to NOHz mode on CPU #0 [ 0.675994] AppArmor: AppArmor Filesystem Enabled [ 0.758544] NET: Registered protocol family 2 [ 0.759307] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.762145] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.762878] TCP bind hash table entries: 16384 (order: 7, 655360 bytes) [ 0.772216] TCP: Hash tables configured (established 16384 bind 16384) [ 0.772369] TCP reno registered [ 0.772430] UDP hash table entries: 256 (order: 2, 24576 bytes) [ 0.772766] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes) [ 0.773956] NET: Registered protocol family 1 [ 0.775756] RPC: Registered named UNIX socket transport module. [ 0.775817] RPC: Registered udp transport module. [ 0.775848] RPC: Registered tcp transport module. [ 0.775909] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.777740] Trying to unpack rootfs image as initramfs... [ 0.990417] Freeing initrd memory: 1732K [ 0.997039] PMU: registered new PMU device of type 0 [ 1.001770] audit: initializing netlink socket (disabled) [ 1.002197] type=2000 audit(1.031:1): initialized [ 1.181945] Kprobe smoke test started [ 1.193084] Kprobe smoke test failed: register_jprobe returned -22 [ 1.193145] Kprobe smoke test failed: register_jprobes returned -22 [ 1.203460] BUG: Kprobe smoke test: 2 out of 6 tests failed [ 1.228332] JFFS2 version 2.2. (NAND) (SUMMARY) \xffffffc2\xffffffa9 2001-2006 Red Hat, Inc. [ 1.232116] Btrfs loaded [ 1.232238] msgmni has been set to 966 [ 1.237579] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.237976] io scheduler noop registered (default) [ 1.238037] io scheduler deadline registered [ 1.238220] io scheduler cfq registered [ 1.300262] OMAP DSS rev 2.0 [ 1.312957] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.379669] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 [ 1.394226] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 [ 1.409820] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 [ 2.275238] console [ttyO2] enabled [ 2.292602] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3 [ 2.317626] [drm] Initialized drm 1.1.0 20060810 [ 2.364074] brd: module loaded [ 2.388366] loop: module loaded [ 2.392211] omap_device: omap_i2c.1: new worst case activate latency 0: 122070 [ 2.408905] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.416473] omap2-nand driver initializing [ 2.421722] No NAND device found. [ 2.425567] No NAND device found. [ 2.429992] OneNAND driver initializing [ 2.443817] usbcore: registered new interface driver asix [ 2.450592] usbcore: registered new interface driver cdc_ether [ 2.457702] usbcore: registered new interface driver smsc95xx [ 2.464660] usbcore: registered new interface driver net1080 [ 2.471221] usbcore: registered new interface driver cdc_subset [ 2.478271] usbcore: registered new interface driver zaurus [ 2.484436] cdc_ncm: 01-June-2011 [ 2.488586] usbcore: registered new interface driver cdc_ncm [ 2.496948] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.504150] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96 [ 2.504577] ehci-omap ehci-omap.0: failed to get ehci port0 regulator [ 2.504638] ehci-omap ehci-omap.0: failed to get ehci port1 regulator [ 3.511138] ehci-omap ehci-omap.0: phy reset operation timed out [ 4.518951] ehci-omap ehci-omap.0: phy reset operation timed out [ 4.518981] ehci-omap ehci-omap.0: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3 [ 4.519012] ehci-omap ehci-omap.0: reset hcc_params 0016 thresh 1 uframes 256/512/1024 park [ 4.519042] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 4.528686] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 [ 4.537322] ehci-omap ehci-omap.0: park 0 [ 4.537414] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 [ 4.543518] ehci-omap ehci-omap.0: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT [ 4.543579] ehci-omap ehci-omap.0: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 4.558166] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 4.565551] usb usb1: default language 0x0409 [ 4.565734] usb usb1: udev 1, busnum 1, minor = 0 [ 4.565734] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.572998] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.580688] usb usb1: Product: OMAP-EHCI Host Controller [ 4.586364] usb usb1: Manufacturer: Linux 3.0.0-1007-linaro-omap ehci_hcd [ 4.593566] usb usb1: SerialNumber: ehci-omap.0 [ 4.602539] usb usb1: usb_probe_device [ 4.602569] usb usb1: configuration #1 chosen from 1 choice [ 4.603424] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 4.605285] hub 1-0:1.0: usb_probe_interface [ 4.605316] hub 1-0:1.0: usb_probe_interface - got id [ 4.605377] hub 1-0:1.0: USB hub found [ 4.609558] hub 1-0:1.0: 3 ports detected [ 4.614135] hub 1-0:1.0: standalone hub [ 4.614166] hub 1-0:1.0: individual port power switching [ 4.614166] hub 1-0:1.0: individual port over-current protection [ 4.614196] hub 1-0:1.0: power on to power good time: 20ms [ 4.614776] hub 1-0:1.0: local power source is good [ 4.614807] hub 1-0:1.0: enabling power on all ports [ 4.617889] ehci-omap ehci-omap.0: ...powerup ports... [ 4.644592] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.651184] ohci_hcd: block sizes: ed 64 td 64 [ 4.651641] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller [ 4.659851] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2 [ 4.668151] ohci-omap3 ohci-omap3.0: starting OHCI controller [ 4.668426] ohci-omap3 ohci-omap3.0: created debug files [ 4.668518] ohci-omap3 ohci-omap3.0: irq 76, io mem 0x48064400 [ 4.714935] ehci-omap ehci-omap.0: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT [ 4.714996] hub 1-0:1.0: port 2: status 0501 change 0001 [ 4.746643] ohci-omap3 ohci-omap3.0: OHCI controller state [ 4.746643] ohci-omap3 ohci-omap3.0: OHCI 1.0, NO legacy support registers [ 4.746673] ohci-omap3 ohci-omap3.0: control 0x283 RWC HCFS=operational CBSR=3 [ 4.746704] ohci-omap3 ohci-omap3.0: cmdstatus 0x00000 SOC=0 [ 4.746734] ohci-omap3 ohci-omap3.0: intrstatus 0x00000004 SF [ 4.746765] ohci-omap3 ohci-omap3.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 4.746795] ohci-omap3 ohci-omap3.0: hcca frame #0011 [ 4.746795] ohci-omap3 ohci-omap3.0: roothub.a 0a000203 POTPGT=10 NPS NDP=3(3) [ 4.746826] ohci-omap3 ohci-omap3.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 4.746856] ohci-omap3 ohci-omap3.0: roothub.status 00008000 DRWE [ 4.746887] ohci-omap3 ohci-omap3.0: roothub.portstatus [0] 0x00000100 PPS [ 4.746917] ohci-omap3 ohci-omap3.0: roothub.portstatus [1] 0x00000100 PPS [ 4.746948] ohci-omap3 ohci-omap3.0: roothub.portstatus [2] 0x00000100 PPS [ 4.747161] usb usb2: default language 0x0409 [ 4.747283] usb usb2: udev 1, busnum 2, minor = 128 [ 4.747314] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.754547] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.762237] usb usb2: Product: OMAP3 OHCI Host Controller [ 4.767974] usb usb2: Manufacturer: Linux 3.0.0-1007-linaro-omap ohci_hcd [ 4.775177] usb usb2: SerialNumber: ohci-omap3.0 [ 4.782135] usb usb2: usb_probe_device [ 4.782165] usb usb2: configuration #1 chosen from 1 choice [ 4.782287] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 4.783355] hub 2-0:1.0: usb_probe_interface [ 4.783386] hub 2-0:1.0: usb_probe_interface - got id [ 4.783416] hub 2-0:1.0: USB hub found [ 4.787689] hub 2-0:1.0: 3 ports detected [ 4.791961] hub 2-0:1.0: standalone hub [ 4.791961] hub 2-0:1.0: no power switching (usb 1.0) [ 4.791992] hub 2-0:1.0: global over-current protection [ 4.791992] hub 2-0:1.0: power on to power good time: 20ms [ 4.792114] hub 2-0:1.0: local power source is good [ 4.792144] hub 2-0:1.0: no over-current condition exists [ 4.792144] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 4.795867] usbcore: registered new interface driver cdc_wdm [ 4.802093] Initializing USB Mass Storage driver... [ 4.808013] usbcore: registered new interface driver usb-storage [ 4.814636] USB Mass Storage support registered. [ 4.819976] hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 [ 4.820129] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 4.822204] usbcore: registered new interface driver libusual [ 4.878479] ehci-omap ehci-omap.0: port 2 high speed [ 4.878509] ehci-omap ehci-omap.0: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 4.940979] usb 1-2: new high speed USB device number 2 using ehci-omap [ 5.011260] ehci-omap ehci-omap.0: port 2 high speed [ 5.011291] ehci-omap ehci-omap.0: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 5.105682] usb 1-2: udev 2, busnum 1, minor = 1 [ 5.105712] usb 1-2: New USB device found, idVendor=0424, idProduct=9514 [ 5.112854] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.122558] usb 1-2: usb_probe_device [ 5.122589] usb 1-2: configuration #1 chosen from 1 choice [ 5.123260] usb 1-2: adding 1-2:1.0 (config #1, interface 0) [ 5.124359] hub 1-2:1.0: usb_probe_interface [ 5.124389] hub 1-2:1.0: usb_probe_interface - got id [ 5.124450] hub 1-2:1.0: USB hub found [ 5.128936] hub 1-2:1.0: 5 ports detected [ 5.133178] hub 1-2:1.0: compound device; port removable status: FRRRR [ 5.133209] hub 1-2:1.0: individual port power switching [ 5.133209] hub 1-2:1.0: individual port over-current protection [ 5.134033] hub 1-2:1.0: TT per port [ 5.134063] hub 1-2:1.0: TT requires at most 8 FS bit times (666 ns) [ 5.134063] hub 1-2:1.0: power on to power good time: 100ms [ 5.134704] hub 1-2:1.0: local power source is good [ 5.134765] hub 1-2:1.0: enabling power on all ports [ 5.137664] hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 [ 5.138763] usbcore: registered new interface driver usbtest [ 5.150726] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 5.166656] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1 [ 5.186645] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 5.193847] twl_rtc twl_rtc: Power up reset detected. [ 5.200775] twl_rtc twl_rtc: Enabling TWL-RTC. [ 5.206756] i2c /dev entries driver [ 5.215087] Driver for 1-wire Dallas network protocol. [ 5.223114] omap_device: omap_wdt.-1: new worst case activate latency 0: 30517 [ 5.231323] hub 1-2:1.0: port 1: status 0101 change 0001 [ 5.231903] hub 1-2:1.0: port 2: status 0101 change 0001 [ 5.234558] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 5.242431] twl4030_wdt twl4030_wdt: Failed to register misc device [ 5.249420] twl4030_wdt: probe of twl4030_wdt failed with error -16 [ 5.259216] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 5.331573] usb 1-2: link qh256-0001/9e7092e0 start 1 [1/0 us] [ 5.331665] hub 1-2:1.0: state 7 ports 5 chg 0006 evt 0000 [ 5.331970] hub 1-2:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 5.391510] Registered led device: beagleboard::usr0 [ 5.392822] Registered led device: beagleboard::usr1 [ 5.394927] Registered led device: beagleboard::pmu_stat [ 5.415191] usbcore: registered new interface driver usbhid [ 5.421936] usb 1-2.1: new high speed USB device number 3 using ehci-omap [ 5.429748] usbhid: USB HID core driver [ 5.436401] oprofile: using arm/armv7 [ 5.441558] TCP cubic registered [ 5.445007] Initializing XFRM netlink socket [ 5.450561] NET: Registered protocol family 10 [ 5.459045] IPv6 over IPv4 tunneling driver [ 5.467681] NET: Registered protocol family 17 [ 5.472869] NET: Registered protocol family 15 [ 5.477935] Registering the dns_resolver key type [ 5.483795] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 5.492126] ThumbEE CPU extension supported. [ 5.496887] Registering SWP/SWPB emulation handler [ 5.551055] usb 1-2.1: udev 3, busnum 1, minor = 2 [ 5.551116] usb 1-2.1: New USB device found, idVendor=0424, idProduct=ec00 [ 5.565979] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.580352] clock: disabling unused clocks to save power [ 5.587768] usb 1-2.1: usb_probe_device [ 5.587799] usb 1-2.1: configuration #1 chosen from 1 choice [ 5.590362] usb 1-2.1: adding 1-2.1:1.0 (config #1, interface 0) [ 5.592102] smsc95xx 1-2.1:1.0: usb_probe_interface [ 5.592132] smsc95xx 1-2.1:1.0: usb_probe_interface - got id [ 5.592376] smsc95xx v1.0.4 [ 5.600677] fbcvt: 1280x720@60: CVT Name - .921M9-R [ 5.642333] Console: switching to colour frame buffer device 160x45 [ 5.673278] regulator_init_complete: VDAC: incomplete constraints, leaving on [ 5.683563] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 5.700744] Freeing init memory: 332K [ 5.719055] smsc95xx 1-2.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 26:ef:c7:d8:b1:c1 [ 5.738311] mmc0: host does not support reading read-only switch. assuming write-enable. [ 5.756927] mmc0: new high speed SDHC card at address e9e0 [ 5.764251] hub 1-2:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 5.786987] mmcblk0: mmc0:e9e0 SD08G 7.42 GiB [ 5.806030] mmcblk0: p1 p2 [ 5.847686] usb 1-2.2: new high speed USB device number 4 using ehci-omap [ 5.964599] ohci-omap3 ohci-omap3.0: auto-stop root hub [ 6.066864] usb 1-2.2: default language 0x0409 [ 6.077026] udevd[669]: starting version 175 [ 6.140991] usb 1-2.2: udev 4, busnum 1, minor = 3 [ 6.141021] usb 1-2.2: New USB device found, idVendor=0db0, idProduct=6861 [ 6.181854] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.230133] usb 1-2.2: Product: 802.11g WLAN + Pen Drive [ 6.339416] usb 1-2.2: Manufacturer: Ralink [ 6.419616] usb 1-2.2: usb_probe_device [ 6.419647] usb 1-2.2: configuration #1 chosen from 1 choice [ 6.439788] usb 1-2.2: adding 1-2.2:1.0 (config #1, interface 0) [ 6.440643] usbtest 1-2.2:1.0: usb_probe_interface [ 6.440673] usbtest 1-2.2:1.0: usb_probe_interface - got id [ 6.513824] hub 1-2:1.0: state 7 ports 5 chg 0000 evt 0004 [ 7.136901] hub 2-0:1.0: hub_suspend [ 7.137542] usb usb2: bus auto-suspend [ 7.137603] ohci-omap3 ohci-omap3.0: suspend root hub [ 8.207366] ------------[ cut here ]------------ [ 8.265289] WARNING: at /build/buildd/linux-linaro-omap-3.0.0/kernel/irq/handle.c:130 handle_irq_event_percpu+0xef/0x1a2() [ 8.467041] irq 379 handler twl_rtc_interrupt+0x1/0x6e enabled interrupts [ 8.575439] Modules linked in: [ 8.633819] [<80010c29>] (unwind_backtrace+0x1/0x90) from [<80034a0d>] (warn_slowpath_common+0x39/0x50) [ 8.726898] [<80034a0d>] (warn_slowpath_common+0x39/0x50) from [<80034a87>] (warn_slowpath_fmt+0x21/0x2a) [ 8.818695] [<80034a87>] (warn_slowpath_fmt+0x21/0x2a) from [<8006c819>] (handle_irq_event_percpu+0xef/0x1a2) [ 8.924621] [<8006c819>] (handle_irq_event_percpu+0xef/0x1a2) from [<8006c8fb>] (handle_irq_event+0x2f/0x44) [ 8.964965] EXT3-fs: barriers not enabled [ 9.011657] [<8006c8fb>] (handle_irq_event+0x2f/0x44) from [<8006e00d>] (handle_edge_irq+0xad/0xd4) [ 9.034545] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode [ 9.050323] kjournald starting. Commit interval 5 seconds [ 9.108154] [<8006e00d>] (handle_edge_irq+0xad/0xd4) from [<8006c2e5>] (generic_handle_irq+0x1d/0x30) [ 9.199005] [<8006c2e5>] (generic_handle_irq+0x1d/0x30) from [<80286719>] (handle_twl4030_sih+0x79/0xac) [ 9.199035] [<80286719>] (handle_twl4030_sih+0x79/0xac) from [<8006c2e5>] (generic_handle_irq+0x1d/0x30) [ 9.199066] [<8006c2e5>] (generic_handle_irq+0x1d/0x30) from [<80286647>] (twl4030_irq_thread+0x6f/0xb0) [ 9.199127] [<80286647>] (twl4030_irq_thread+0x6f/0xb0) from [<80049b23>] (kthread+0x57/0x68) [ 9.199157] [<80049b23>] (kthread+0x57/0x68) from [<8000ca75>] (kernel_thread_exit+0x1/0x6) [ 9.199188] ---[ end trace e645d44ba3f9292a ]--- [ 12.731201] udevd[862]: starting version 175 [ 15.853332] unwind: Index not found 7f8391af [ 15.853363] unwind: Index not found 7f8391af [ 15.853393] unwind: Index not found 7f8391af [ 15.948822] EXT3-fs (mmcblk0p2): using internal journal [ 17.485900] OMAP3 Beagle/Devkit8000 SoC init [ 17.881256] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok [ 20.288116] cfg80211: Calling CRDA to update world regulatory domain [ 20.814086] type=1400 audit(1341078629.127:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1095 comm="apparmor_parser" [ 20.917022] type=1400 audit(1341078629.229:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1095 comm="apparmor_parser" [ 20.955261] type=1400 audit(1341078629.268:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1095 comm="apparmor_parser" [ 20.984039] type=1400 audit(1341078629.299:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1100 comm="apparmor_parser" [ 21.019653] rt2500usb 1-2.2:1.0: usb_probe_interface [ 21.019683] rt2500usb 1-2.2:1.0: usb_probe_interface - got id [ 21.052917] type=1400 audit(1341078629.369:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1100 comm="apparmor_parser" [ 21.054412] type=1400 audit(1341078629.369:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1100 comm="apparmor_parser" [ 21.506042] ieee80211 phy0: Selected rate control algorithm 'pid' [ 21.568847] Registered led device: rt2500usb-phy0::radio [ 21.569671] Registered led device: rt2500usb-phy0::quality [ 21.586486] usbcore: registered new interface driver rt2500usb [ 22.056060] cfg80211: World regulatory domain updated: [ 22.056091] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 22.056121] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 22.056152] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 22.056182] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 22.056213] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 22.056213] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 25.109741] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.115264] unwind: Index not found 7fa5c19b [ 27.001678] wlan0: authenticate with 00:22:b0:a7:60:5c (try 1) [ 27.004486] wlan0: authenticated [ 27.025299] wlan0: associate with 00:22:b0:a7:60:5c (try 1) [ 27.028015] wlan0: RX AssocResp from 00:22:b0:a7:60:5c (capab=0x431 status=0 aid=4) [ 27.028045] wlan0: associated [ 27.036743] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 29.215515] init: failsafe main process (1203) killed by TERM signal [ 29.791595] type=1400 audit(1341078638.104:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1366 comm="apparmor_parser" [ 29.795623] type=1400 audit(1341078638.111:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1366 comm="apparmor_parser" [ 29.797149] type=1400 audit(1341078638.111:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1366 comm="apparmor_parser" [ 29.929687] type=1400 audit(1341078638.244:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1367 comm="apparmor_parser" [ 29.960754] type=1400 audit(1341078638.276:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1367 comm="apparmor_parser" [ 29.970520] type=1400 audit(1341078638.283:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1367 comm="apparmor_parser" [ 29.982238] type=1400 audit(1341078638.299:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1367 comm="apparmor_parser" [ 30.001831] type=1400 audit(1341078638.315:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=1367 comm="apparmor_parser" [ 30.009552] type=1400 audit(1341078638.322:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=1367 comm="apparmor_parser" [ 30.017333] type=1400 audit(1341078638.330:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1367 comm="apparmor_parser" [ 35.615814] init: opengles-sgx-omap3 pre-start process (1440) terminated with status 1