Bug #871904 “[0411:01ee Buffalo WLI-UC-GNM2] is not recognized a...” : Precise (12.04) : Bugs : linux package : Ubuntu

Revision history for this message

Nobuto Murata (nobuto) wrote on 2011-10-10:

#1

AcpiTables.txt Edit (202.5 KiB, text/plain; charset="utf-8")
AlsaDevices.txt Edit (467 bytes, text/plain; charset="utf-8")
BootDmesg.txt Edit (55.5 KiB, text/plain; charset="utf-8")
Card0.Amixer.values.txt Edit (2.5 KiB, text/plain; charset="utf-8")
Card0.Codecs.codec.0.txt Edit (9.7 KiB, text/plain; charset="utf-8")
Card0.Codecs.codec.1.txt Edit (155 bytes, text/plain; charset="utf-8")
CurrentDmesg.txt Edit (23.1 KiB, text/plain; charset="utf-8")
Dependencies.txt Edit (1.8 KiB, text/plain; charset="utf-8")
IwConfig.txt Edit (535 bytes, text/plain; charset="utf-8")
Lspci.txt Edit (13.9 KiB, text/plain; charset="utf-8")
Lsusb.txt Edit (671 bytes, text/plain; charset="utf-8")
PciMultimedia.txt Edit (598 bytes, text/plain; charset="utf-8")
ProcCpuinfo.txt Edit (1.6 KiB, text/plain; charset="utf-8")
ProcEnviron.txt Edit (156 bytes, text/plain; charset="utf-8")
ProcInterrupts.txt Edit (1.6 KiB, text/plain; charset="utf-8")
ProcModules.txt Edit (3.3 KiB, text/plain; charset="utf-8")
PulseSinks.txt Edit (2.1 KiB, text/plain; charset="utf-8")
PulseSources.txt Edit (3.6 KiB, text/plain; charset="utf-8")
RfKill.txt Edit (112 bytes, text/plain; charset="utf-8")
UdevDb.txt Edit (101.3 KiB, text/plain; charset="utf-8")
UdevLog.txt Edit (234.6 KiB, text/plain; charset="utf-8")
WifiSyslog.txt Edit (193.6 KiB, text/plain; charset="utf-8")

Revision history for this message

Nobuto Murata (nobuto) wrote on 2011-10-10:

#2

lsusb.log Edit (3.3 KiB, text/plain)

Full lsusb log of the device.

Brad Figg (brad-figg) on 2011-10-10

Changed in linux (Ubuntu):
status:	New → Confirmed

Revision history for this message

Nobuto Murata (nobuto) wrote on 2011-10-10:

#3

dmesg output when plugged-in is just one line.

[ 2646.360107] usb 1-1: new high speed USB device number 4 using ehci_hcd

Revision history for this message

Julian Wiedmann (jwiedmann) wrote on 2011-10-11:

#4

If modprobe'ing rt2800usb and writing "0411 01ee" to /sys/bus/usb/drivers/rt2800usb/new_id makes it work, a kernel with CONFIG_RT2X00_DEBUG should provide additional information about the chip.

Note that current Oneiric kernels are built with
# CONFIG_RT2800USB_RT35XX is not set
# CONFIG_RT2800USB_RT53XX is not set
so there's some chips that the driver doesn't support yet.

Revision history for this message

Nobuto Murata (nobuto) wrote on 2011-10-12:

#5

Download full text (3.3 KiB)

==========
$ sudo modprobe rt2800usb
$ echo '0411 01ee' | sudo tee /sys/bus/usb/drivers/rt2800usb/new_id
==========
with the commands above, the device woks as wlan device and I can connect to network.

dmesg when plugged in the device is pasted below.

[ 2155.304128] usb 1-1: new high speed USB device number 3 using ehci_hcd
[ 2155.472534] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472544] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2155.472551] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472559] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2155.472565] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472573] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2155.472579] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472586] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2155.472593] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472600] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2155.472607] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472614] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2155.472620] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472628] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2155.472634] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472642] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2155.472648] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472656] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2155.472662] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472669] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2155.472676] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472683] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2155.472689] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472697] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2155.472703] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472710] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2155.472717] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472724] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2155.472995] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
[ 2155.475798] Registered led device...

==========
$ sudo modprobe rt2800usb
$ echo '0411 01ee' | sudo tee /sys/bus/usb/drivers/rt2800usb/new_id
==========
with the commands above, the device woks as wlan device and I can connect to network.

dmesg when plugged in the device is pasted below.

[ 2155.304128] usb 1-1: new high speed USB device number 3 using ehci_hcd
[ 2155.472534] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472544] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2155.472551] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472559] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2155.472565] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472573] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2155.472579] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472586] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2155.472593] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472600] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2155.472607] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472614] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2155.472620] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472628] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2155.472634] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472642] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2155.472648] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472656] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2155.472662] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472669] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2155.472676] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472683] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2155.472689] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472697] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2155.472703] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472710] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2155.472717] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 2155.472724] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2155.472995] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
[ 2155.475798] Registered led device: rt2800usb-phy2::radio
[ 2155.475863] Registered led device: rt2800usb-phy2::assoc
[ 2155.475927] Registered led device: rt2800usb-phy2::quality

Revision history for this message

Nobuto Murata (nobuto) wrote on 2011-10-16:

#6

dmesg.txt Edit (3.1 KiB, text/plain)

With CONFIG_RT2X00_DEBUG=y kernel, dmesg outputs the additional line below:

[ 625.093338] phy2 -> rt2x00_set_chip: Info - Chipset detected - rt: 3070, rf: 0005, rev: 0201.

Full dmesg output when connecting the device is attached.

Revision history for this message

penalvch (penalvch) wrote on 2012-04-03:

#7

Nobuto MURATA, thank you for reporting this and helping make Ubuntu better. This bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? Can you try with the latest development release of Ubuntu? ISO CD images are available from http://cdimage.ubuntu.com/releases/ .

If it remains an issue, could you run the following command from a Terminal (Applications->Accessories->Terminal). It will automatically gather and attach updated debug information to this report.

apport-collect -p linux <replace-with-bug-number>

Also, if you could test the latest upstream kernel available that would be great. It will allow additional upstream developers to examine the issue. Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Once you've tested the upstream kernel, please remove the 'needs-upstream-testing' tag. This can be done by clicking on the yellow pencil icon next to the tag located at the bottom of the bug description and deleting the 'needs-upstream-testing' text. Please let us know your results.

Thanks in advance.

Changed in linux (Ubuntu):
status:	Confirmed → Incomplete
tags:	added: needs-upstream-testing

Revision history for this message

J.Son (sohn9086) wrote on 2012-05-07:

#8

Hello,

I am another user of WLI-UC-GNM2, and trying to use it on linux.
Unfortunately, it is not working properly yet, and I can see the same symptom as Nobuto's comment #5.
As long as checking on my PC, the latest Ubuntu 12.04 kernel (3.2.0-24-generic) is still compiled without CONFIG_RT2800USB_RT35XX nor CONFIG_RT2800USB_RT53XX option that Julian mentioned above.

Revision history for this message

penalvch (penalvch) wrote on 2012-05-10:

#9

J.Son, please execute the following via the Terminal and feel free to subscribe me to it:
ubuntu-bug linux

Thanks!

Revision history for this message

Julian Wiedmann (jwiedmann) wrote on 2012-05-10:

#10

J.Son,
the chip is identified as RT3070, so those additional CONFIGs won't be necessary. Just send a patch upstream (similar to [0]) that adds the VID/PID to the driver.

[0] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=d42a179b941a9e4cc6cf41d0f3cbadd75fc48a89

Changed in linux (Ubuntu):
status:	Incomplete → Confirmed

penalvch (penalvch) on 2012-05-10

Changed in linux (Ubuntu):
status:	Confirmed → Incomplete

Revision history for this message

J.Son (sohn9086) wrote on 2012-05-12:

#11

Hi, Chirstopher

I'm sorry I don't know how to subscribe the result of 'ubuntu-bug linux' to you.
I executed that and it was subscribed as Bug #998466.

Revision history for this message

J.Son (sohn9086) wrote on 2012-05-12:

#12

Adding Buffalo WLI-UC-GNM2 support. Edit (505 bytes, text/plain)

Sorry. I don't know how to send this patch to upstream.

Ubuntu Foundations Team Bug Bot (crichton) on 2012-05-12

tags:

added: patch

Revision history for this message

Herton R. Krzesinski (herton) wrote on 2012-05-16:

#13

J.Son, to send a patch upstream, Add a changelog and a Signed-of-by: your name <your mail>, like this patch example: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=patch;h=d42a179b941a9e4cc6cf41d0f3cbadd75fc48a89;hp=d896d463ee166105684c566b7ee14cb37948ee10

Then, send the patch to <email address hidden> optionally with Cc: to the mail addresses listed in the output of command ./scripts/get_maintainer.pl bug_871904.patch (script/get_maintainer.pl is found on kernel sources)

Herton R. Krzesinski (herton) on 2012-05-16

tags:

added: kt-worked

Revision history for this message

J.Son (sohn9086) wrote on 2012-06-14:

#14

Herton, thanks for your advice. I sent the patch to <email address hidden>.

Revision history for this message

Herton R. Krzesinski (herton) wrote on 2012-07-11:

#15

Patch is on wireless-testing right now, going upstream soon probably.

Changed in linux (Ubuntu):
status:	Incomplete → Triaged

Tim Gardner (timg-tpi) on 2012-08-06

Changed in linux (Ubuntu Precise):
assignee:	nobody → Herton R. Krzesinski (herton)
status:	New → Fix Committed
Changed in linux (Ubuntu Quantal):
assignee:	nobody → Herton R. Krzesinski (herton)
status:	Triaged → Fix Committed

Tim Gardner (timg-tpi) on 2012-08-06

Changed in linux (Ubuntu Oneiric):
assignee:	nobody → Herton R. Krzesinski (herton)
status:	New → Fix Committed

Revision history for this message

Ubuntu Foundations Team Bug Bot (crichton) wrote on 2012-08-06:

#16

The attachment "Adding Buffalo WLI-UC-GNM2 support." of this bug report has been identified as being a patch. The ubuntu-reviewers team has been subscribed to the bug report so that they can review the patch. In the event that this is in fact not a patch you can resolve this situation by removing the tag 'patch' from the bug report and editing the attachment so that it is not flagged as a patch. Additionally, if you are member of the ubuntu-reviewers team please also unsubscribe the team from this bug report.

[This is an automated message performed by a Launchpad user owned by Brian Murray. Please contact him regarding any issues with the action taken in this bug report.]

Revision history for this message

Launchpad Janitor (janitor) wrote on 2012-08-10:

#17

This bug was fixed in the package linux - 3.5.0-9.9

---------------
linux (3.5.0-9.9) quantal-proposed; urgency=low

[ Daniel P. Berrange ]

  * SAUCE: (drop after 3.6) Forbid invocation of kexec_load() outside
    initial PID namespace
    - LP: #1034125

[ Douglas Bagnall ]

* SAUCE: Unlock the rc_dev lock when the raw device is missing
- LP: #1015836

[ Ike Panhc ]

* [Config] Enable EDAC/CLK for highbank
- LP: #1008345

[ Leann Ogasawara ]

* Revert "ubuntu: AUFS -- reenable"

[ Rob Herring ]

  * SAUCE: net: calxedaxgmac: add write barriers around setting owner bit
    - LP: #1008345
  * SAUCE: ARM smp_twd: add back "arm,smp-twd" compatible property
    - LP: #1008345
  * SAUCE: ARM: highbank: add soft power and reset key event handling
    - LP: #1008345
  * SAUCE: ARM: highbank: use writel_relaxed variant for pwr requests
    - LP: #1008345
  * SAUCE: ahci: un-staticize ahci_dev_classify
    - LP: #1008345
  * SAUCE: ahci_platform: add custom hard reset for Calxeda ahci ctrlr
    - LP: #1008345

[ Upstream Kernel Changes ]

  * rt2x00: Add support for BUFFALO WLI-UC-GNM2 to rt2800usb.
    - LP: #871904
  * Avoid sysfs oops when an rc_dev's raw device is absent
    - LP: #1015836
  * eCryptfs: Copy up POSIX ACL and read-only flags from lower mount
  * clk: add DT clock binding support
    - LP: #1008345
  * clk: add DT fixed-clock binding support
    - LP: #1008345
  * clk: add highbank clock support
  * edac: add support for Calxeda highbank memory controller
    - LP: #1008345
  * edac: add support for Calxeda highbank L2 cache ecc
    - LP: #1008345
  * net: calxedaxgmac: enable rx cut-thru mode
    - LP: #1008345
  * net: calxedaxgmac: fix hang on rx refill
    - LP: #1008345
  * eCryptfs: Revert to a writethrough cache model
    - LP: #1034012
  * eCryptfs: Initialize empty lower files when opening them
    - LP: #911507
  * eCryptfs: Unlink lower inode when ecryptfs_create() fails
    - LP: #872905
-- Leann Ogasawara <email address hidden> Wed, 08 Aug 2012 08:39:42 -0700

This bug was fixed in the package linux - 3.5.0-9.9

---------------
linux (3.5.0-9.9) quantal-proposed; urgency=low

[ Daniel P. Berrange ]

* SAUCE: (drop after 3.6) Forbid invocation of kexec_load() outside
    initial PID namespace
    - LP: #1034125

[ Douglas Bagnall ]

* SAUCE: Unlock the rc_dev lock when the raw device is missing
    - LP: #1015836

[ Ike Panhc ]

* [Config] Enable EDAC/CLK for highbank
    - LP: #1008345

[ Leann Ogasawara ]

* Revert "ubuntu: AUFS -- reenable"

[ Rob Herring ]

* SAUCE: net: calxedaxgmac: add write barriers around setting owner bit
    - LP: #1008345
  * SAUCE: ARM smp_twd: add back "arm,smp-twd" compatible property
    - LP: #1008345
  * SAUCE: ARM: highbank: add soft power and reset key event handling
    - LP: #1008345
  * SAUCE: ARM: highbank: use writel_relaxed variant for pwr requests
    - LP: #1008345
  * SAUCE: ahci: un-staticize ahci_dev_classify
    - LP: #1008345
  * SAUCE: ahci_platform: add custom hard reset for Calxeda ahci ctrlr
    - LP: #1008345

[ Upstream Kernel Changes ]

* rt2x00: Add support for BUFFALO WLI-UC-GNM2 to rt2800usb.
    - LP: #871904
  * Avoid sysfs oops when an rc_dev's raw device is absent
    - LP: #1015836
  * eCryptfs: Copy up POSIX ACL and read-only flags from lower mount
  * clk: add DT clock binding support
    - LP: #1008345
  * clk: add DT fixed-clock binding support
    - LP: #1008345
  * clk: add highbank clock support
  * edac: add support for Calxeda highbank memory controller
    - LP: #1008345
  * edac: add support for Calxeda highbank L2 cache ecc
    - LP: #1008345
  * net: calxedaxgmac: enable rx cut-thru mode
    - LP: #1008345
  * net: calxedaxgmac: fix hang on rx refill
    - LP: #1008345
  * eCryptfs: Revert to a writethrough cache model
    - LP: #1034012
  * eCryptfs: Initialize empty lower files when opening them
    - LP: #911507
  * eCryptfs: Unlink lower inode when ecryptfs_create() fails
    - LP: #872905
 -- Leann Ogasawara <leann.ogasawara@canonical.com>   Wed, 08 Aug 2012 08:39:42 -0700

Changed in linux (Ubuntu Quantal):
status:	Fix Committed → Fix Released

Brad Figg (brad-figg) on 2012-08-20

tags:

added: verification-needed-oneiric

Revision history for this message

Luis Henriques (henrix) wrote on 2012-08-21:

#18

This bug is awaiting verification that the kernel for Precise in -proposed solves the problem (3.2.0-30.47). Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-precise' to 'verification-done-precise'.

If verification is not done by one week from today, this fix will be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you!

tags:

added: verification-needed-precise

Revision history for this message

Luis Henriques (henrix) wrote on 2012-08-23:

#19

J. Son, Nobuto (or anyone affected by this bug) please test the -proposed kernel, as per comment #18? Thanks.

Revision history for this message

Nobuto Murata (nobuto) wrote on 2012-08-23:

#20

I can confirm that precise-proposed kernel fixes this issue. Now it is recognized as wlan without any modification.

tags:

added: verification-done-precise
removed: verification-needed-precise

Revision history for this message

Luis Henriques (henrix) wrote on 2012-08-23:

#21

Since this fix came from an upstreams update and has been verified in Precised, I'm tagging it as verified in Oneiric.

tags:

added: verification-done-oneiric
removed: verification-needed-oneiric

Revision history for this message

Launchpad Janitor (janitor) wrote on 2012-09-04:

#23

Download full text (13.6 KiB)

This bug was fixed in the package linux - 3.2.0-30.48

---------------
linux (3.2.0-30.48) precise-proposed; urgency=low

[Luis Henriques]

* Release Tracking Bug
- LP: #1041217

[ Upstream Kernel Changes ]

* mutex: Place lock in contended state after fastpath_lock failure
- LP: #1041114

linux (3.2.0-30.47) precise-proposed; urgency=low

[Luis Henriques]

* Release Tracking Bug
- LP: #1036581

[ Andy Whitcroft ]

  * add support for generating binary device trees and install them in
    /lib/firmware
    - LP: #1030600
  * [Config] add dtb_file configuration for highbank
    - LP: #1030600

[ Chris Van Hoof ]

  * SAUCE: dell-laptop: additional rfkill blacklist Dell XPS 13
    - LP: #1030957
  * [Config] Add cifs support to the nfs-modules list
    - LP: #1031398

[ Daniel P. Berrange ]

  * SAUCE: (drop after 3.6) Forbid invocation of kexec_load() outside
    initial PID namespace
    - LP: #1034125

[ Dann Frazier ]

  * [Config] Compile the rtc-pl031 driver builtin on the highbank kernel
    flavour
    - LP: #1035110

[ Douglas Bagnall ]

* SAUCE: Unlock the rc_dev lock when the raw device is missing
- LP: #1015836

[ Rob Herring ]

  * SAUCE: ARM: highbank: add soft power and reset key event handling
    - LP: #1033853
  * SAUCE: ARM: highbank: use writel_relaxed variant for pwr requests
    - LP: #1033853
  * SAUCE: ahci: un-staticize ahci_dev_classify
    - LP: #1033853
  * SAUCE: ahci_platform: add custom hard reset for Calxeda ahci ctrlr
    - LP: #1033853

[ Stefan Bader ]

* (pre-stable) KVM: VMX: Set CPU_BASED_RDPMC_EXITING for nested
- LP: #1031090

[ Tim Gardner ]

* [Config] updateconfigs

[ Upstream Kernel Changes ]

  * ideapad: generate valid key event only
    - LP: #1029834
  * mm: reduce the amount of work done when updating min_free_kbytes
    - LP: #1032640
  * mm: compaction: allow compaction to isolate dirty pages
    - LP: #1032640
  * mm: compaction: determine if dirty pages can be migrated without
    blocking within ->migratepage
    - LP: #1032640
  * mm: page allocator: do not call direct reclaim for THP allocations
    while compaction is deferred
    - LP: #1032640
  * mm: compaction: make isolate_lru_page() filter-aware again
    - LP: #1032640
  * mm: compaction: introduce sync-light migration for use by compaction
    - LP: #1032640
  * mm: vmscan: when reclaiming for compaction, ensure there are sufficient
    free pages available
    - LP: #1032640
  * mm: vmscan: do not OOM if aborting reclaim to start compaction
    - LP: #1032640
  * mm: vmscan: check if reclaim should really abort even if
    compaction_ready() is true for one zone
    - LP: #1032640
  * vmscan: promote shared file mapped pages
    - LP: #1032640
  * vmscan: activate executable pages after first usage
    - LP: #1032640
  * mm/vmscan.c: consider swap space when deciding whether to continue
    reclaim
    - LP: #1032640
  * mm: test PageSwapBacked in lumpy reclaim
    - LP: #1032640
  * mm: vmscan: convert global reclaim to per-memcg LRU lists
    - LP: #1032640
  * cpuset: mm: reduce large amounts of memory barrier related damage v3
    - LP: #1032640
  * mm/hugetlb: fix warni...

This bug was fixed in the package linux - 3.2.0-30.48

---------------
linux (3.2.0-30.48) precise-proposed; urgency=low

[Luis Henriques]

* Release Tracking Bug
    - LP: #1041217

[ Upstream Kernel Changes ]

* mutex: Place lock in contended state after fastpath_lock failure
    - LP: #1041114

linux (3.2.0-30.47) precise-proposed; urgency=low

[Luis Henriques]

* Release Tracking Bug
    - LP: #1036581

[ Andy Whitcroft ]

* add support for generating binary device trees and install them in
    /lib/firmware
    - LP: #1030600
  * [Config] add dtb_file configuration for highbank
    - LP: #1030600

[ Chris Van Hoof ]

* SAUCE: dell-laptop: additional rfkill blacklist Dell XPS 13
    - LP: #1030957
  * [Config] Add cifs support to the nfs-modules list
    - LP: #1031398

[ Daniel P. Berrange ]

* SAUCE: (drop after 3.6) Forbid invocation of kexec_load() outside
    initial PID namespace
    - LP: #1034125

[ Dann Frazier ]

* [Config] Compile the rtc-pl031 driver builtin on the highbank kernel
    flavour
    - LP: #1035110

[ Douglas Bagnall ]

* SAUCE: Unlock the rc_dev lock when the raw device is missing
    - LP: #1015836

[ Rob Herring ]

* SAUCE: ARM: highbank: add soft power and reset key event handling
    - LP: #1033853
  * SAUCE: ARM: highbank: use writel_relaxed variant for pwr requests
    - LP: #1033853
  * SAUCE: ahci: un-staticize ahci_dev_classify
    - LP: #1033853
  * SAUCE: ahci_platform: add custom hard reset for Calxeda ahci ctrlr
    - LP: #1033853

[ Stefan Bader ]

* (pre-stable) KVM: VMX: Set CPU_BASED_RDPMC_EXITING for nested
    - LP: #1031090

[ Tim Gardner ]

* [Config] updateconfigs

[ Upstream Kernel Changes ]

* ideapad: generate valid key event only
    - LP: #1029834
  * mm: reduce the amount of work done when updating min_free_kbytes
    - LP: #1032640
  * mm: compaction: allow compaction to isolate dirty pages
    - LP: #1032640
  * mm: compaction: determine if dirty pages can be migrated without
    blocking within ->migratepage
    - LP: #1032640
  * mm: page allocator: do not call direct reclaim for THP allocations
    while compaction is deferred
    - LP: #1032640
  * mm: compaction: make isolate_lru_page() filter-aware again
    - LP: #1032640
  * mm: compaction: introduce sync-light migration for use by compaction
    - LP: #1032640
  * mm: vmscan: when reclaiming for compaction, ensure there are sufficient
    free pages available
    - LP: #1032640
  * mm: vmscan: do not OOM if aborting reclaim to start compaction
    - LP: #1032640
  * mm: vmscan: check if reclaim should really abort even if
    compaction_ready() is true for one zone
    - LP: #1032640
  * vmscan: promote shared file mapped pages
    - LP: #1032640
  * vmscan: activate executable pages after first usage
    - LP: #1032640
  * mm/vmscan.c: consider swap space when deciding whether to continue
    reclaim
    - LP: #1032640
  * mm: test PageSwapBacked in lumpy reclaim
    - LP: #1032640
  * mm: vmscan: convert global reclaim to per-memcg LRU lists
    - LP: #1032640
  * cpuset: mm: reduce large amounts of memory barrier related damage v3
    - LP: #1032640
  * mm/hugetlb: fix warning in alloc_huge_page/dequeue_huge_page_vma
    - LP: #1032640
  * Fix NULL dereferences in scsi_cmd_to_driver
    - LP: #1032640
  * sched/nohz: Fix rq->cpu_load[] calculations
    - LP: #1032640
  * sched/nohz: Fix rq->cpu_load calculations some more
    - LP: #1032640
  * powerpc/ftrace: Fix assembly trampoline register usage
    - LP: #1032640
  * cx25821: Remove bad strcpy to read-only char*
    - LP: #1032640
  * x86: Fix boot on Twinhead H12Y
    - LP: #1032640
  * r8169: RxConfig hack for the 8168evl.
    - LP: #1032640
  * cifs: when CONFIG_HIGHMEM is set, serialize the read/write kmaps
    - LP: #1032640
  * wireless: rt2x00: rt2800usb add more devices ids
    - LP: #1032640
  * wireless: rt2x00: rt2800usb more devices were identified
    - LP: #1032640
  * rt2800usb: 2001:3c17 is an RT3370 device
    - LP: #1032640
  * usb: gadget: Fix g_ether interface link status
    - LP: #1032640
  * ext4: pass a char * to ext4_count_free() instead of a buffer_head ptr
    - LP: #1032640
  * ftrace: Disable function tracing during suspend/resume and hibernation,
    again
    - LP: #1032640
  * x86, microcode: microcode_core.c simple_strtoul cleanup
    - LP: #1032640
  * x86, microcode: Sanitize per-cpu microcode reloading interface
    - LP: #1032640
  * usbdevfs: Correct amount of data copied to user in processcompl_compat
    - LP: #1032640
  * ext4: fix overhead calculation used by ext4_statfs()
    - LP: #1032640
  * udf: Improve table length check to avoid possible overflow
    - LP: #1032640
  * powerpc: Add "memory" attribute for mfmsr()
    - LP: #1032640
  * mwifiex: correction in mcs index check
    - LP: #1032640
  * USB: option: Ignore ZTE (Vodafone) K3570/71 net interfaces
    - LP: #1032640
  * USB: option: add ZTE MF821D
    - LP: #1032640
  * target: Add generation of LOGICAL BLOCK ADDRESS OUT OF RANGE
    - LP: #1032640
  * target: Add range checking to UNMAP emulation
    - LP: #1032640
  * target: Fix reading of data length fields for UNMAP commands
    - LP: #1032640
  * target: Fix possible integer underflow in UNMAP emulation
    - LP: #1032640
  * target: Check number of unmap descriptors against our limit
    - LP: #1032640
  * s390/idle: fix sequence handling vs cpu hotplug
    - LP: #1032640
  * rtlwifi: rtl8192de: Fix phy-based version calculation
    - LP: #1032640
  * workqueue: perform cpu down operations from low priority cpu_notifier()
    - LP: #1032640
  * ALSA: hda - Add support for Realtek ALC282
    - LP: #1025377, #1032640
  * iommu/amd: Fix hotplug with iommu=pt
    - LP: #1032640
  * drm/radeon: Try harder to avoid HW cursor ending on a multiple of 128
    columns.
    - LP: #1032640
  * ALSA: hda - Turn on PIN_OUT from hdmi playback prepare.
    - LP: #1032640
  * block: add blk_queue_dead()
    - LP: #1032640
  * Fix device removal NULL pointer dereference
    - LP: #1032640
  * Avoid dangling pointer in scsi_requeue_command()
    - LP: #1032640
  * fix hot unplug vs async scan race
    - LP: #1032640
  * fix eh wakeup (scsi_schedule_eh vs scsi_restart_operations)
    - LP: #1032640
  * libsas: continue revalidation
    - LP: #1032640
  * libsas: fix sas_discover_devices return code handling
    - LP: #1032640
  * iscsi-target: Drop bogus struct file usage for iSCSI/SCTP
    - LP: #1032640
  * mmc: sdhci-pci: CaFe has broken card detection
    - LP: #1032640
  * ext4: don't let i_reserved_meta_blocks go negative
    - LP: #1032640
  * ext4: undo ext4_calc_metadata_amount if we fail to claim space
    - LP: #1032640
  * ASoC: dapm: Fix _PRE and _POST events for DAPM performance improvements
    - LP: #1032640
  * locks: fix checking of fcntl_setlease argument
    - LP: #1032640
  * ACPI/AC: prevent OOPS on some boxes due to missing check
    power_supply_register() return value check
    - LP: #1032640
  * drm/radeon: fix bo creation retry path
    - LP: #1032640
  * drm/radeon: fix non revealent error message
    - LP: #1032640
  * drm/radeon: fix hotplug of DP to DVI|HDMI passive adapters (v2)
    - LP: #1032640
  * drm/radeon: on hotplug force link training to happen (v2)
    - LP: #1032640
  * Btrfs: call the ordered free operation without any locks held
    - LP: #1032640
  * nouveau: Fix alignment requirements on src and dst addresses
    - LP: #1032640
  * mm: fix wrong argument of migrate_huge_pages() in
    soft_offline_huge_page()
    - LP: #1032640
  * Linux 3.2.25
    - LP: #1032640
  * x86: Simplify code by removing a !SMP #ifdefs from 'struct cpuinfo_x86'
    - LP: #1033522
  * Linux 3.2.26
    - LP: #1033522
  * rt2x00: Add support for BUFFALO WLI-UC-GNM2 to rt2800usb.
    - LP: #871904
  * Avoid sysfs oops when an rc_dev's raw device is absent
    - LP: #1015836
  * eCryptfs: Copy up POSIX ACL and read-only flags from lower mount
    - LP: #1009207
  * net: calxedaxgmac: fix hang on rx refill
    - LP: #1033853
  * eCryptfs: Initialize empty lower files when opening them
    - LP: #911507
  * eCryptfs: Revert to a writethrough cache model
    - LP: #1034012
  * eCryptfs: Unlink lower inode when ecryptfs_create() fails
    - LP: #872905
  * floppy: Cleanup disk->queue before caling put_disk() if add_disk() was
    never called
    - LP: #1035435
  * xen: mark local pages as FOREIGN in the m2p_override
    - LP: #1035435
  * lirc_sir: make device registration work
    - LP: #1035435
  * stable: update references to older 2.6 versions for 3.x
    - LP: #1035435
  * ALSA: hda - add dock support for Thinkpad X230 Tablet
    - LP: #1026953, #1035435
  * cfg80211: fix interface combinations check for ADHOC(IBSS)
    - LP: #1035435
  * m68k: Correct the Atari ALLOWINT definition
    - LP: #1035435
  * nfsd4: our filesystems are normally case sensitive
    - LP: #1035435
  * random: Use arch_get_random_int instead of cycle counter if avail
    - LP: #1035435
  * random: Use arch-specific RNG to initialize the entropy store
    - LP: #1035435
  * random: Adjust the number of loops when initializing
    - LP: #1035435
  * random: make 'add_interrupt_randomness()' do something sane
    - LP: #1035435
  * random: use lockless techniques in the interrupt path
    - LP: #1035435
  * random: create add_device_randomness() interface
    - LP: #1035435
  * usb: feed USB device information to the /dev/random driver
    - LP: #1035435
  * net: feed /dev/random with the MAC address when registering a device
    - LP: #1035435
  * random: use the arch-specific rng in xfer_secondary_pool
    - LP: #1035435
  * random: add new get_random_bytes_arch() function
    - LP: #1035435
  * rtc: wm831x: Feed the write counter into device_add_randomness()
    - LP: #1035435
  * mfd: wm831x: Feed the device UUID into device_add_randomness()
    - LP: #1035435
  * ASoC: wm8994: Ensure there are enough BCLKs for four channels
    - LP: #1035435
  * futex: Test for pi_mutex on fault in futex_wait_requeue_pi()
    - LP: #1035435
  * futex: Fix bug in WARN_ON for NULL q.pi_state
    - LP: #1035435
  * futex: Forbid uaddr == uaddr2 in futex_wait_requeue_pi()
    - LP: #1035435
  * video/smscufx: fix line counting in fb_write
    - LP: #1035435
  * Input: synaptics - handle out of bounds values from the hardware
    - LP: #1001251, #1035435
  * ALSA: hda - Fix invalid D3 of headphone DAC on VT202x codecs
    - LP: #1035435
  * ALSA: mpu401: Fix missing initialization of irq field
    - LP: #1035435
  * x86, nops: Missing break resulting in incorrect selection on Intel
    - LP: #1035435
  * s390/mm: downgrade page table after fork of a 31 bit process
    - LP: #1035435
  * Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts
    - LP: #1035435
  * dm thin: reduce endio_hook pool size
    - LP: #1035435
  * dm thin: fix memory leak in process_prepared_mapping error paths
    - LP: #1035435
  * random: mix in architectural randomness in extract_buf()
    - LP: #1035435
  * asus-wmi: use ASUS_WMI_METHODID_DSTS2 as default DSTS ID.
    - LP: #1035435
  * virtio-blk: Use block layer provided spinlock
    - LP: #1035435
  * s390/mm: fix fault handling for page table walk case
    - LP: #1035435
  * nfs: skip commit in releasepage if we're freeing memory for fs-related
    reasons
    - LP: #1035435
  * md/raid1: don't abort a resync on the first badblock.
    - LP: #1035435
  * pcdp: use early_ioremap/early_iounmap to access pcdp table
    - LP: #1035435
  * lib/vsprintf.c: kptr_restrict: fix pK-error in SysRq show-all-timers(Q)
    - LP: #1035435
  * nilfs2: fix deadlock issue between chcp and thaw ioctls
    - LP: #1035435
  * SUNRPC: return negative value in case rpcbind client creation error
    - LP: #1035435
  * ARM: 7466/1: disable interrupt before spinning endlessly
    - LP: #1035435
  * ARM: 7467/1: mutex: use generic xchg-based implementation for ARMv6+
    - LP: #1035435
  * ARM: 7476/1: vfp: only clear vfp state for current cpu in
    vfp_pm_suspend
    - LP: #1035435
  * ARM: 7477/1: vfp: Always save VFP state in vfp_pm_suspend on UP
    - LP: #1035435
  * ARM: 7478/1: errata: extend workaround for erratum #720789
    - LP: #1035435
  * ARM: Fix undefined instruction exception handling
    - LP: #1035435
  * USB: echi-dbgp: increase the controller wait time to come out of halt.
    - LP: #1035435
  * ASoC: wm8962: Allow VMID time to fully ramp
    - LP: #1035435
  * mm/page_alloc.c: remove pageblock_default_order()
    - LP: #1035435
  * mm: setup pageblock_order before it's used by sparsemem
    - LP: #1035435
  * mm: mmu_notifier: fix freed page still mapped in secondary MMU
    - LP: #1035435
  * mm: hugetlbfs: close race during teardown of hugetlbfs shared page
    tables
    - LP: #1035435
  * ALSA: snd-usb: fix clock source validity index
    - LP: #1035435
  * ALSA: hda - Support dock on Lenovo Thinkpad T530 with ALC269VC
    - LP: #1035435
  * ore: Fix out-of-bounds access in _ios_obj()
    - LP: #1035435
  * m68k: Make sys_atomic_cmpxchg_32 work on classic m68k
    - LP: #1035435
  * drm/i915: prefer wide & slow to fast & narrow in DP configs
    - LP: #1035435
  * drop_monitor: fix sleeping in invalid context warning
    - LP: #1035435
  * drop_monitor: Make updating data->skb smp safe
    - LP: #1035435
  * drop_monitor: prevent init path from scheduling on the wrong cpu
    - LP: #1035435
  * drop_monitor: dont sleep in atomic context
    - LP: #1035435
  * pch_uart: Fix missing break for 16 byte fifo
    - LP: #1035435
  * pch_uart: Fix rx error interrupt setting issue
    - LP: #1035435
  * pch_uart: Fix parity setting issue
    - LP: #1035435
  * Linux 3.2.27
    - LP: #1035435
  * HID: multitouch: add new PID from Ideacom
    - LP: #1026174
  * drm/i915: pch_irq_handler -> {ibx, cpt}_irq_handler
    - LP: #1031630
 -- Luis Henriques <luis.henriques@canonical.com>   Fri, 24 Aug 2012 14:14:43 +0100

Changed in linux (Ubuntu Precise):
status:	Fix Committed → Fix Released

Revision history for this message

Chris Halse Rogers (raof) wrote on 2012-09-04: Update Released

#22

The verification of this Stable Release Update has completed successfully and the package has now been released to -updates. Subsequently, the Ubuntu Stable Release Updates Team is being unsubscribed and will not receive messages about this bug report. In the event that you encounter a regression using the package from -updates please report a new bug using ubuntu-bug and tag the bug report regression-update so we can easily find any regresssions.

Revision history for this message

Launchpad Janitor (janitor) wrote on 2012-09-05:

#24

Download full text (8.0 KiB)

This bug was fixed in the package linux - 3.0.0-25.41

---------------
linux (3.0.0-25.41) oneiric-proposed; urgency=low

[Luis Henriques]

* Release Tracking Bug
- LP: #1036178

[ Andy Whitcroft ]

  * SAUCE: rds_ib_send() -- prevent local pings triggering BUG_ON()
    - LP: #1016299
    - CVE-2012-2372

[ Douglas Bagnall ]

* SAUCE: Unlock the rc_dev lock when the raw device is missing
- LP: #1015836

[ Upstream Kernel Changes ]

  * cifs: always update the inode cache with the results from a FIND_*
    - LP: #1031926
  * ntp: Fix STA_INS/DEL clearing bug
    - LP: #1031926
  * mm: fix lost kswapd wakeup in kswapd_stop()
    - LP: #1031926
  * MIPS: Properly align the .data..init_task section.
    - LP: #1031926
  * UBIFS: fix a bug in empty space fix-up
    - LP: #1031926
  * dm raid1: fix crash with mirror recovery and discard
    - LP: #1031926
  * mm/vmstat.c: cache align vm_stat
    - LP: #1031926
  * mm: memory hotplug: Check if pages are correctly reserved on a
    per-section basis
    - LP: #1031926
  * mm: reduce the amount of work done when updating min_free_kbytes
    - LP: #1031926
  * mm: vmscan: fix force-scanning small targets without swap
    - LP: #1031926
  * vmscan: clear ZONE_CONGESTED for zone with good watermark
    - LP: #1031926
  * vmscan: add shrink_slab tracepoints
    - LP: #1031926
  * vmscan: shrinker->nr updates race and go wrong
    - LP: #1031926
  * vmscan: reduce wind up shrinker->nr when shrinker can't do work
    - LP: #1031926
  * vmscan: limit direct reclaim for higher order allocations
    - LP: #1031926
  * vmscan: abort reclaim/compaction if compaction can proceed
    - LP: #1031926
  * mm: compaction: trivial clean up in acct_isolated()
    - LP: #1031926
  * mm: change isolate mode from #define to bitwise type
    - LP: #1031926
  * mm: compaction: make isolate_lru_page() filter-aware
    - LP: #1031926
  * mm: zone_reclaim: make isolate_lru_page() filter-aware
    - LP: #1031926
  * mm: migration: clean up unmap_and_move()
    - LP: #1031926
  * mm: compaction: allow compaction to isolate dirty pages
    - LP: #1031926
  * mm: compaction: determine if dirty pages can be migrated without
    blocking within ->migratepage
    - LP: #1031926
  * mm: page allocator: do not call direct reclaim for THP allocations
    while compaction is deferred
    - LP: #1031926
  * mm: compaction: make isolate_lru_page() filter-aware again
    - LP: #1031926
  * kswapd: avoid unnecessary rebalance after an unsuccessful balancing
    - LP: #1031926
  * kswapd: assign new_order and new_classzone_idx after wakeup in sleeping
    - LP: #1031926
  * mm: compaction: introduce sync-light migration for use by compaction
    - LP: #1031926
  * mm: vmscan: when reclaiming for compaction, ensure there are sufficient
    free pages available
    - LP: #1031926
  * mm: vmscan: do not OOM if aborting reclaim to start compaction
    - LP: #1031926
  * mm: vmscan: check if reclaim should really abort even if
    compaction_ready() is true for one zone
    - LP: #1031926
  * vmscan: promote shared file mapped pages
    - LP: #1031926
  * vmscan: activate executable pages after first usage
    - LP: #1031926
  *...

Ubuntu
linux package

[0411:01ee Buffalo WLI-UC-GNM2] is not recognized as wlan

Bug Description

Related branches

CVE References

Other bug subscribers

Patches

Bug attachments

Remote bug watches

	Status	Importance	Assigned to
linux (Ubuntu)	Fix Released	Undecided	Herton R. Krzesinski
Oneiric	Fix Released	Undecided	Herton R. Krzesinski
Precise	Fix Released	Undecided	Herton R. Krzesinski
Quantal	Fix Released	Undecided	Herton R. Krzesinski

Ubuntulinux package

[0411:01ee Buffalo WLI-UC-GNM2] is not recognized as wlan

Bug Description

Related branches

CVE References

Other bug subscribers

Patches

Bug attachments

Remote bug watches

Ubuntu
linux package