[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.0-14-generic (buildd@allspice) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 (Ubuntu 3.0.0-14.23-generic 3.0.9) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-14-generic root=UUID=b6e40959-7b62-4e69-b5a5-568f2f977c18 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006fdf0000 (usable) [ 0.000000] BIOS-e820: 000000006fdf0000 - 000000006fdf1000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006fdf1000 - 000000006fe00000 (ACPI data) [ 0.000000] BIOS-e820: 000000006fe00000 - 000000006ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-78LMT-S2P/GA-78LMT-S2P, BIOS F2 04/08/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x6fdf0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFFC0000000 write-back [ 0.000000] 1 base 000040000000 mask FFFFE0000000 write-back [ 0.000000] 2 base 000060000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 00006FE00000 mask FFFFFFE00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 1GB, type WB [ 0.000000] reg 1, base: 1GB, range: 512MB, type WB [ 0.000000] reg 2, base: 1536MB, range: 256MB, type WB [ 0.000000] reg 3, base: 1790MB, range: 2MB, type UC [ 0.000000] total RAM covered: 1790M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 512M num_reg: 3 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 1790MB, range: 2MB, type UC [ 0.000000] reg 2, base: 1792MB, range: 256MB, type UC [ 0.000000] found SMP MP-table at [ffff8800000f5bf0] f5bf0 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-000000006fdf0000 [ 0.000000] 0000000000 - 0040000000 page 1G [ 0.000000] 0040000000 - 006fc00000 page 2M [ 0.000000] 006fc00000 - 006fdf0000 page 4k [ 0.000000] kernel direct mapping tables up to 6fdf0000 @ 1fffd000-20000000 [ 0.000000] RAMDISK: 365ae000 - 372cf000 [ 0.000000] ACPI: RSDP 00000000000f75e0 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 000000006fdf1000 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 000000006fdf1080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 000000006fdf1100 06398 (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 000000006fdf0000 00040 [ 0.000000] ACPI: SSDT 000000006fdf7580 0095E (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 000000006fdf7f00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 000000006fdf7f40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: MATS 000000006fdf7f80 00034 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 000000006fdf7ff0 000A2 (v01 GBT GBT B0 5455312E BG?? 45240101) [ 0.000000] ACPI: APIC 000000006fdf74c0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000006fdf0000 [ 0.000000] Initmem setup node 0 0000000000000000-000000006fdf0000 [ 0.000000] NODE_DATA [000000006fdeb000 - 000000006fdeffff] [ 0.000000] [ffffea0000000000-ffffea00019fffff] PMD -> [ffff88006d800000-ffff88006f1fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0006fdf0 [ 0.000000] On node 0 totalpages: 458111 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6209 pages used for memmap [ 0.000000] DMA32 zone: 447919 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 6ff00000 (gap: 6ff00000:70100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88006fa00000 s79616 r8192 d22784 u262144 [ 0.000000] pcpu-alloc: s79616 r8192 d22784 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 451841 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-14-generic root=UUID=b6e40959-7b62-4e69-b5a5-568f2f977c18 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ fffe000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 1777996k/1832896k available (6109k kernel code, 452k absent, 54448k reserved, 4876k data, 984k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 14680064 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3013.902 MHz processor. [ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.80 BogoMIPS (lpj=12055608) [ 0.008008] pid_max: default: 32768 minimum: 301 [ 0.008030] Security Framework initialized [ 0.008042] AppArmor: AppArmor initialized [ 0.008043] Yama: becoming mindful. [ 0.008221] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.008959] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.012094] Mount-cache hash table entries: 256 [ 0.012209] Initializing cgroup subsys cpuacct [ 0.012213] Initializing cgroup subsys memory [ 0.012221] Initializing cgroup subsys devices [ 0.012222] Initializing cgroup subsys freezer [ 0.012224] Initializing cgroup subsys net_cls [ 0.012225] Initializing cgroup subsys blkio [ 0.012230] Initializing cgroup subsys perf_event [ 0.012253] tseg: 006ff00000 [ 0.012255] CPU: Physical Processor ID: 0 [ 0.012256] CPU: Processor Core ID: 0 [ 0.012258] mce: CPU supports 6 MCE banks [ 0.013387] ACPI: Core revision 20110413 [ 0.016026] ftrace: allocating 25647 entries in 101 pages [ 0.024553] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.065453] CPU0: AMD Athlon(tm) II X2 250 Processor stepping 03 [ 0.068003] Performance Events: AMD PMU driver. [ 0.068003] ... version: 0 [ 0.068003] ... bit width: 48 [ 0.068003] ... generic registers: 4 [ 0.068003] ... value mask: 0000ffffffffffff [ 0.068003] ... max period: 00007fffffffffff [ 0.068003] ... fixed-purpose events: 0 [ 0.068003] ... event mask: 000000000000000f [ 0.068003] Booting Node 0, Processors #1 [ 0.068003] smpboot cpu 1: start_ip = 9a000 [ 0.156018] Brought up 2 CPUs [ 0.156020] Total of 2 processors activated (12054.43 BogoMIPS). [ 0.156500] devtmpfs: initialized [ 0.156500] PM: Registering ACPI NVS region at 6fdf0000 (4096 bytes) [ 0.157050] print_constraints: dummy: [ 0.157071] Time: 7:59:26 Date: 01/17/12 [ 0.157098] NET: Registered protocol family 16 [ 0.157176] node 0 link 0: io port [c000, ffff] [ 0.157179] TOM: 0000000080000000 aka 2048M [ 0.157180] Fam 10h mmconf [e0000000, e00fffff] [ 0.157182] node 0 link 0: mmio [a0000, bffff] [ 0.157184] node 0 link 0: mmio [80000000, dfffffff] [ 0.157186] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.157188] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff] [ 0.157191] bus: [00, 03] on node 0 link 0 [ 0.157193] bus: 00 index 0 [io 0x0000-0xffff] [ 0.157194] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.157196] bus: 00 index 2 [mem 0x80000000-0xdfffffff] [ 0.157197] bus: 00 index 3 [mem 0xe0400000-0xfcffffffff] [ 0.157199] bus: 00 index 4 [mem 0xe0100000-0xe03fffff] [ 0.157106] Trying to unpack rootfs image as initramfs... [ 0.157208] Extended Config Space enabled on 1 nodes [ 0.157222] ACPI: bus type pci registered [ 0.157263] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.157265] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.171259] PCI: Using configuration type 1 for base access [ 0.171788] bio: create slab at 0 [ 0.172390] ACPI: EC: Look up EC in DSDT [ 0.175801] ACPI: Interpreter enabled [ 0.175804] ACPI: (supports S0 S3 S4 S5) [ 0.175817] ACPI: Using IOAPIC for interrupt routing [ 0.281516] ACPI: No dock devices found. [ 0.281519] HEST: Table not found. [ 0.281521] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.281567] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.281650] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.281652] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.281654] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.281656] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.281658] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] [ 0.281669] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600 [ 0.281679] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] [ 0.281706] pci 0000:00:01.0: [1022:9602] type 1 class 0x000604 [ 0.281737] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604 [ 0.281759] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.281761] pci 0000:00:06.0: PME# disabled [ 0.281789] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101 [ 0.281807] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07] [ 0.281816] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03] [ 0.281825] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07] [ 0.281834] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03] [ 0.281843] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f] [ 0.281852] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] [ 0.281871] pci 0000:00:11.0: set SATA to AHCI mode [ 0.281902] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.281915] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff] [ 0.281974] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03 [ 0.281986] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff] [ 0.282050] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.282068] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff] [ 0.282134] pci 0000:00:12.2: supports D1 D2 [ 0.282136] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.282139] pci 0000:00:12.2: PME# disabled [ 0.282158] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.282171] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff] [ 0.282230] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03 [ 0.282242] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff] [ 0.282307] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.282325] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff] [ 0.282391] pci 0000:00:13.2: supports D1 D2 [ 0.282392] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.282396] pci 0000:00:13.2: PME# disabled [ 0.282421] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.282506] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101 [ 0.282522] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.282531] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.282539] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.282548] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.282557] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f] [ 0.282602] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.282622] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit] [ 0.282677] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.282680] pci 0000:00:14.2: PME# disabled [ 0.282692] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.282761] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.282799] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.282811] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff] [ 0.282872] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 0.282885] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 0.282896] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 0.282907] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 0.282919] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 0.282956] pci 0000:01:05.0: [1002:9616] type 0 class 0x000300 [ 0.282963] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref] [ 0.282967] pci 0000:01:05.0: reg 14: [io 0xee00-0xeeff] [ 0.282971] pci 0000:01:05.0: reg 18: [mem 0xfdff0000-0xfdffffff] [ 0.282979] pci 0000:01:05.0: reg 24: [mem 0xfde00000-0xfdefffff] [ 0.282990] pci 0000:01:05.0: supports D1 D2 [ 0.283025] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.283027] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.283030] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff] [ 0.283033] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.283063] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.283075] pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff] [ 0.283094] pci 0000:02:00.0: reg 18: [mem 0xfdaff000-0xfdafffff 64bit pref] [ 0.283106] pci 0000:02:00.0: reg 20: [mem 0xfdaf8000-0xfdafbfff 64bit pref] [ 0.283139] pci 0000:02:00.0: supports D1 D2 [ 0.283140] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.283144] pci 0000:02:00.0: PME# disabled [ 0.288047] pci 0000:00:06.0: PCI bridge to [bus 02-02] [ 0.288053] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff] [ 0.288056] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.288059] pci 0000:00:06.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref] [ 0.288098] pci 0000:03:06.0: [1283:8212] type 0 class 0x000104 [ 0.288119] pci 0000:03:06.0: reg 10: [io 0xcf00-0xcf07] [ 0.288130] pci 0000:03:06.0: reg 14: [io 0xce00-0xce03] [ 0.288141] pci 0000:03:06.0: reg 18: [io 0xcd00-0xcd07] [ 0.288152] pci 0000:03:06.0: reg 1c: [io 0xcc00-0xcc03] [ 0.288164] pci 0000:03:06.0: reg 20: [io 0xcb00-0xcb0f] [ 0.288185] pci 0000:03:06.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.288253] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 0.288257] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.288261] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.288264] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 0.288267] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.288269] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.288270] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.288272] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.288274] pci 0000:00:14.4: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode) [ 0.288288] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.288464] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.288492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] [ 0.288518] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.288541] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.288544] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.288545] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.294868] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.294898] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.294925] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.294952] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.294978] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.295004] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.295030] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.295057] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.295136] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.295138] vgaarb: loaded [ 0.295139] vgaarb: bridge control possible 0000:01:05.0 [ 0.295270] SCSI subsystem initialized [ 0.295315] libata version 3.00 loaded. [ 0.295343] usbcore: registered new interface driver usbfs [ 0.295350] usbcore: registered new interface driver hub [ 0.295368] usbcore: registered new device driver usb [ 0.295424] PCI: Using ACPI for IRQ routing [ 0.303747] PCI: pci_cache_line_size set to 64 bytes [ 0.303753] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] [ 0.303813] reserve RAM buffer: 000000000009f400 - 000000000009ffff [ 0.303815] reserve RAM buffer: 000000006fdf0000 - 000000006fffffff [ 0.303882] NetLabel: Initializing [ 0.303883] NetLabel: domain hash size = 128 [ 0.303884] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.303892] NetLabel: unlabeled traffic allowed by default [ 0.303920] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.303924] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.305044] Switching to clocksource hpet [ 0.306041] Switched to NOHz mode on CPU #0 [ 0.306043] Switched to NOHz mode on CPU #1 [ 0.308427] AppArmor: AppArmor Filesystem Enabled [ 0.308458] pnp: PnP ACPI init [ 0.308471] ACPI: bus type pnp registered [ 0.308558] pnp 00:00: [bus 00-ff] [ 0.308561] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.308563] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.308564] pnp 00:00: [io 0x0d00-0xffff window] [ 0.308566] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.308568] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.308569] pnp 00:00: [mem 0x80000000-0xfebfffff window] [ 0.308614] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.308621] pnp 00:01: [io 0x0010-0x001f] [ 0.308623] pnp 00:01: [io 0x0022-0x003f] [ 0.308624] pnp 00:01: [io 0x0044-0x005f] [ 0.308625] pnp 00:01: [io 0x0062-0x0063] [ 0.308627] pnp 00:01: [io 0x0065-0x006f] [ 0.308628] pnp 00:01: [io 0x0074-0x007f] [ 0.308629] pnp 00:01: [io 0x0091-0x0093] [ 0.308631] pnp 00:01: [io 0x00a2-0x00bf] [ 0.308632] pnp 00:01: [io 0x00e0-0x00ef] [ 0.308633] pnp 00:01: [io 0x04d0-0x04d1] [ 0.308635] pnp 00:01: [io 0x0220-0x0225] [ 0.308636] pnp 00:01: [io 0x0290-0x0294] [ 0.308683] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.308685] system 00:01: [io 0x0220-0x0225] has been reserved [ 0.308687] system 00:01: [io 0x0290-0x0294] has been reserved [ 0.308689] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.353207] Freeing initrd memory: 13444k freed [ 0.372246] pnp 00:02: [io 0x4100-0x411f] [ 0.372249] pnp 00:02: [io 0x0228-0x022f] [ 0.372250] pnp 00:02: [io 0x040b] [ 0.372252] pnp 00:02: [io 0x04d6] [ 0.372253] pnp 00:02: [io 0x0c00-0x0c01] [ 0.372254] pnp 00:02: [io 0x0c14] [ 0.372255] pnp 00:02: [io 0x0c50-0x0c52] [ 0.372257] pnp 00:02: [io 0x0c6c-0x0c6d] [ 0.372258] pnp 00:02: [io 0x0c6f] [ 0.372259] pnp 00:02: [io 0x0cd0-0x0cd1] [ 0.372260] pnp 00:02: [io 0x0cd2-0x0cd3] [ 0.372261] pnp 00:02: [io 0x0cd4-0x0cdf] [ 0.372263] pnp 00:02: [io 0x4000-0x40fe] [ 0.372264] pnp 00:02: [io 0x4210-0x4217] [ 0.372265] pnp 00:02: [io 0x0b00-0x0b0f] [ 0.372266] pnp 00:02: [io 0x0b10-0x0b1f] [ 0.372268] pnp 00:02: [io 0x0b20-0x0b3f] [ 0.372270] pnp 00:02: [mem 0x00000000-0x00000fff window] [ 0.372271] pnp 00:02: [mem 0xfee00400-0xfee00fff window] [ 0.372278] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.372307] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:06.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.372349] system 00:02: [io 0x4100-0x411f] has been reserved [ 0.372351] system 00:02: [io 0x0228-0x022f] has been reserved [ 0.372353] system 00:02: [io 0x040b] has been reserved [ 0.372355] system 00:02: [io 0x04d6] has been reserved [ 0.372356] system 00:02: [io 0x0c00-0x0c01] has been reserved [ 0.372358] system 00:02: [io 0x0c14] has been reserved [ 0.372360] system 00:02: [io 0x0c50-0x0c52] has been reserved [ 0.372361] system 00:02: [io 0x0c6c-0x0c6d] has been reserved [ 0.372363] system 00:02: [io 0x0c6f] has been reserved [ 0.372365] system 00:02: [io 0x0cd0-0x0cd1] has been reserved [ 0.372366] system 00:02: [io 0x0cd2-0x0cd3] has been reserved [ 0.372368] system 00:02: [io 0x0cd4-0x0cdf] has been reserved [ 0.372370] system 00:02: [io 0x4000-0x40fe] has been reserved [ 0.372371] system 00:02: [io 0x4210-0x4217] has been reserved [ 0.372373] system 00:02: [io 0x0b00-0x0b0f] has been reserved [ 0.372375] system 00:02: [io 0x0b10-0x0b1f] has been reserved [ 0.372376] system 00:02: [io 0x0b20-0x0b3f] has been reserved [ 0.372378] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.372382] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.372452] pnp 00:03: [dma 4] [ 0.372453] pnp 00:03: [io 0x0000-0x000f] [ 0.372455] pnp 00:03: [io 0x0080-0x0090] [ 0.372456] pnp 00:03: [io 0x0094-0x009f] [ 0.372457] pnp 00:03: [io 0x00c0-0x00df] [ 0.372475] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.372508] pnp 00:04: [irq 0 disabled] [ 0.372520] pnp 00:04: [irq 8] [ 0.372522] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.372541] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.372558] pnp 00:05: [io 0x0070-0x0073] [ 0.372575] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.372581] pnp 00:06: [io 0x0061] [ 0.372597] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.372602] pnp 00:07: [io 0x00f0-0x00ff] [ 0.372610] pnp 00:07: [irq 13] [ 0.372628] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.372823] pnp 00:08: [io 0x03f8-0x03ff] [ 0.372830] pnp 00:08: [irq 4] [ 0.372867] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.372890] pnp 00:09: [io 0x0060] [ 0.372893] pnp 00:09: [io 0x0064] [ 0.372900] pnp 00:09: [irq 1] [ 0.372924] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.372943] pnp 00:0a: [mem 0xe0000000-0xefffffff] [ 0.372974] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.372976] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.373082] pnp 00:0b: [mem 0x000d1c00-0x000d3fff] [ 0.373084] pnp 00:0b: [mem 0x000f0000-0x000f7fff] [ 0.373085] pnp 00:0b: [mem 0x000f8000-0x000fbfff] [ 0.373087] pnp 00:0b: [mem 0x000fc000-0x000fffff] [ 0.373088] pnp 00:0b: [mem 0x6fdf0000-0x6fdfffff] [ 0.373089] pnp 00:0b: [mem 0xffff0000-0xffffffff] [ 0.373091] pnp 00:0b: [mem 0x00000000-0x0009ffff] [ 0.373092] pnp 00:0b: [mem 0x00100000-0x6fdeffff] [ 0.373094] pnp 00:0b: [mem 0x6fe00000-0x6fefffff] [ 0.373095] pnp 00:0b: [mem 0x6ff00000-0x6fffffff] [ 0.373097] pnp 00:0b: [mem 0x70000000-0x7fffffff] [ 0.373098] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 0.373099] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 0.373101] pnp 00:0b: [mem 0xfff80000-0xfffeffff] [ 0.373104] pnp 00:0b: disabling [mem 0x000d1c00-0x000d3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.373107] pnp 00:0b: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.373109] pnp 00:0b: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.373112] pnp 00:0b: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.373115] pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.373118] pnp 00:0b: disabling [mem 0x00100000-0x6fdeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.373156] system 00:0b: [mem 0x6fdf0000-0x6fdfffff] could not be reserved [ 0.373158] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved [ 0.373160] system 00:0b: [mem 0x6fe00000-0x6fefffff] has been reserved [ 0.373162] system 00:0b: [mem 0x6ff00000-0x6fffffff] could not be reserved [ 0.373164] system 00:0b: [mem 0x70000000-0x7fffffff] has been reserved [ 0.373165] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.373167] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.373169] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.373172] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.373188] pnp: PnP ACPI: found 12 devices [ 0.373189] ACPI: ACPI bus type pnp unregistered [ 0.378608] PCI: max bus depth: 1 pci_try_num: 2 [ 0.378622] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.378624] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.378626] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff] [ 0.378629] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.378632] pci 0000:00:06.0: PCI bridge to [bus 02-02] [ 0.378634] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff] [ 0.378637] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.378639] pci 0000:00:06.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref] [ 0.378644] pci 0000:03:06.0: BAR 6: assigned [mem 0xfdb00000-0xfdb1ffff pref] [ 0.378646] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 0.378649] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.378653] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.378657] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 0.378677] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.378680] pci 0000:00:06.0: setting latency timer to 64 [ 0.378686] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.378688] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.378690] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.378692] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.378693] pci_bus 0000:00: resource 8 [mem 0x80000000-0xfebfffff] [ 0.378695] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.378697] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdffffff] [ 0.378699] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.378701] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.378702] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.378704] pci_bus 0000:02: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref] [ 0.378706] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.378708] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.378709] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff pref] [ 0.378711] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.378713] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.378714] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.378716] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff] [ 0.378718] pci_bus 0000:03: resource 8 [mem 0x80000000-0xfebfffff] [ 0.378747] NET: Registered protocol family 2 [ 0.378830] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.379340] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.380815] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.381171] TCP: Hash tables configured (established 262144 bind 65536) [ 0.381173] TCP reno registered [ 0.381180] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.381196] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.381322] NET: Registered protocol family 1 [ 0.381333] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.460063] pci 0000:01:05.0: Boot video device [ 0.460071] PCI: CLS 64 bytes, default 64 [ 0.461381] audit: initializing netlink socket (disabled) [ 0.461389] type=2000 audit(1326787165.456:1): initialized [ 0.479635] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.487663] VFS: Disk quotas dquot_6.5.2 [ 0.487706] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.488209] fuse init (API version 7.16) [ 0.488308] msgmni has been set to 3498 [ 0.488749] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.488811] io scheduler noop registered [ 0.488815] io scheduler deadline registered [ 0.488893] io scheduler cfq registered (default) [ 0.489091] pcieport 0000:00:06.0: setting latency timer to 64 [ 0.489116] pcieport 0000:00:06.0: irq 40 for MSI/MSI-X [ 0.489215] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.489242] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.489332] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.489336] ACPI: Power Button [PWRB] [ 0.489366] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.489368] ACPI: Power Button [PWRF] [ 0.489385] ACPI: acpi_idle registered with cpuidle [ 0.540544] ERST: Table is not found! [ 0.540611] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.561069] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.585134] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.585424] Linux agpgart interface v0.103 [ 0.586098] brd: module loaded [ 0.586398] loop: module loaded [ 0.586607] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.587011] Fixed MDIO Bus: probed [ 0.587026] PPP generic driver version 2.4.2 [ 0.587072] tun: Universal TUN/TAP device driver, 1.6 [ 0.587073] tun: (C) 1999-2004 Max Krasnyansky [ 0.587128] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.587219] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.587244] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.587312] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.587320] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.587340] ehci_hcd 0000:00:12.2: debug port 1 [ 0.587367] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 0.596047] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.596166] hub 1-0:1.0: USB hub found [ 0.596169] hub 1-0:1.0: 6 ports detected [ 0.596316] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.596331] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.596359] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 0.596366] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.596387] ehci_hcd 0000:00:13.2: debug port 1 [ 0.596415] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 [ 0.608039] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.608152] hub 2-0:1.0: USB hub found [ 0.608155] hub 2-0:1.0: 6 ports detected [ 0.608268] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.608340] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.608358] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 0.608393] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 0.608427] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 0.668134] hub 3-0:1.0: USB hub found [ 0.668141] hub 3-0:1.0: 3 ports detected [ 0.668277] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.668293] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 0.668323] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 0.668340] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 0.728144] hub 4-0:1.0: USB hub found [ 0.728151] hub 4-0:1.0: 3 ports detected [ 0.728282] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.728299] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.728332] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 0.728365] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 0.788135] hub 5-0:1.0: USB hub found [ 0.788141] hub 5-0:1.0: 3 ports detected [ 0.788273] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.788290] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 0.788316] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 0.788333] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 0.848135] hub 6-0:1.0: USB hub found [ 0.848142] hub 6-0:1.0: 3 ports detected [ 0.848274] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.848293] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 0.848322] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 0.848340] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 [ 0.908159] hub 7-0:1.0: USB hub found [ 0.908166] hub 7-0:1.0: 2 ports detected [ 0.908261] uhci_hcd: USB Universal Host Controller Interface driver [ 0.908329] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.908330] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.908471] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.908538] mousedev: PS/2 mouse device common for all mice [ 0.908608] rtc_cmos 00:05: RTC can wake from S4 [ 0.908683] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.908712] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.908778] device-mapper: uevent: version 1.0.3 [ 0.908820] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 0.908826] cpuidle: using governor ladder [ 0.908827] cpuidle: using governor menu [ 0.908828] EFI Variables Facility v0.08 2004-May-17 [ 0.908981] TCP cubic registered [ 0.909059] NET: Registered protocol family 10 [ 0.909398] NET: Registered protocol family 17 [ 0.909408] Registering the dns_resolver key type [ 0.909466] PM: Hibernation image not present or could not be loaded. [ 0.909478] registered taskstats version 1 [ 0.917510] Magic number: 12:428:976 [ 0.917609] rtc_cmos 00:05: setting system clock to 2012-01-17 07:59:26 UTC (1326787166) [ 0.917615] powernow-k8: Found 1 AMD Athlon(tm) II X2 250 Processor (2 cpu cores) (version 2.20.00) [ 0.917642] powernow-k8: 0 : pstate 0 (3000 MHz) [ 0.917644] powernow-k8: 1 : pstate 1 (2300 MHz) [ 0.917645] powernow-k8: 2 : pstate 2 (1800 MHz) [ 0.917646] powernow-k8: 3 : pstate 3 (800 MHz) [ 0.917776] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.917778] EDD information not available. [ 0.918996] Freeing unused kernel memory: 984k freed [ 0.919239] Write protecting the kernel read-only data: 10240k [ 0.919397] Freeing unused kernel memory: 16k freed [ 0.923024] Freeing unused kernel memory: 1396k freed [ 0.934056] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.942449] udevd[115]: starting version 173 [ 0.997202] ahci 0000:00:11.0: version 3.0 [ 0.997235] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.997346] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 0.997349] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 0.999050] scsi0 : ahci [ 1.003099] scsi1 : ahci [ 1.006075] scsi2 : ahci [ 1.007070] scsi3 : ahci [ 1.007175] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 1.007178] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 1.007181] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 1.007184] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 1.009015] scsi4 : pata_atiixp [ 1.009497] scsi5 : pata_atiixp [ 1.009906] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 1.009908] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 1.030685] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.030706] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.030736] r8169 0000:02:00.0: setting latency timer to 64 [ 1.030777] r8169 0000:02:00.0: irq 41 for MSI/MSI-X [ 1.031090] r8169 0000:02:00.0: eth0: RTL8168e/8111e at 0xffffc90000316000, 50:e5:49:92:ac:52, XID 0c200000 IRQ 41 [ 1.032169] pata_it821x 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.032174] pata_it821x: controller in smart mode. [ 1.032200] pata_it821x 0000:03:06.0: setting latency timer to 64 [ 1.033550] pata_it821x: Firmware 02/09/3030 [ 1.033553] 0: MWDMA2 (null) WDC WD800BB-00HEA0 [ 1.036037] scsi6 : pata_it821x [ 1.037148] scsi7 : pata_it821x [ 1.037195] ata7: PATA max UDMA/133 cmd 0xcf00 ctl 0xce00 bmdma 0xcb00 irq 20 [ 1.037197] ata8: PATA max UDMA/133 cmd 0xcd00 ctl 0xcc00 bmdma 0xcb08 irq 20 [ 1.140046] usb 3-1: new low speed USB device number 2 using ohci_hcd [ 1.324069] ata1: SATA link down (SStatus 0 SControl 300) [ 1.328077] ata4: SATA link down (SStatus 0 SControl 300) [ 1.328144] ata3: SATA link down (SStatus 0 SControl 300) [ 1.460043] Refined TSC clocksource calibration: 3013.329 MHz. [ 1.460054] Switching to clocksource tsc [ 1.500048] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.500231] ata2.00: ATAPI: ASUS DRW-2014L1T, 1.02, max UDMA/66 [ 1.500574] ata2.00: configured for UDMA/66 [ 1.501297] scsi 1:0:0:0: CD-ROM ASUS DRW-2014L1T 1.02 PQ: 0 ANSI: 5 [ 1.503576] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.503580] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.503698] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.503753] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 2.208450] ata7.00: ATA-6: WDC WD800BB-00HEA0, 13.03G13, max UDMA/100 [ 2.208453] ata7.00: 156301488 sectors, multi 0: LBA [ 2.208457] ata7.00: configured for DMA [ 2.208607] scsi 6:0:0:0: Direct-Access ATA WDC WD800BB-00HE 13.0 PQ: 0 ANSI: 5 [ 2.208750] sd 6:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.208752] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 2.208786] sd 6:0:0:0: [sda] Write Protect is off [ 2.208788] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.208963] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.234610] sda: sda1 sda2 < sda5 sda6 > [ 2.234892] sd 6:0:0:0: [sda] Attached SCSI disk [ 2.372210] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input3 [ 2.372310] generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:12.0-1/input0 [ 2.372326] usbcore: registered new interface driver usbhid [ 2.372328] usbhid: USB HID core driver [ 2.895527] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 18.719817] udevd[379]: starting version 173 [ 18.758254] lp: driver loaded but no devices found [ 18.763706] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 9602 [ 18.763711] shpchp 0000:00:01.0: Cannot reserve MMIO region [ 18.763875] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 18.782763] Adding 1951740k swap on /dev/sda5. Priority:-1 extents:1 across:1951740k [ 18.811054] MCE: In-kernel MCE decoding enabled. [ 18.831540] EDAC MC: Ver: 2.1.0 [ 18.844942] [drm] Initialized drm 1.1.0 20060810 [ 18.851685] type=1400 audit(1326787184.428:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=542 comm="apparmor_parser" [ 18.852066] type=1400 audit(1326787184.432:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=542 comm="apparmor_parser" [ 18.852292] type=1400 audit(1326787184.432:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=542 comm="apparmor_parser" [ 18.857996] wmi: Mapper loaded [ 18.859708] AMD64 EDAC driver v3.4.0 [ 18.864438] EDAC amd64: DRAM ECC disabled. [ 18.864446] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 18.864447] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 18.864448] (Note that use of the override may cause unknown side effects.) [ 18.871015] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 18.871767] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 18.871828] SP5100 TCO timer: mmio address 0xfec000f0 already in use [ 18.874832] [drm] radeon defaulting to kernel modesetting. [ 18.874835] [drm] radeon kernel modesetting enabled. [ 18.876777] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 18.876782] radeon 0000:01:05.0: setting latency timer to 64 [ 18.877032] [drm] initializing kernel modesetting (RS780 0x1002:0x9616 0x1458:0xD000). [ 18.877052] [drm] register mmio base: 0xFDFF0000 [ 18.877053] [drm] register mmio size: 65536 [ 18.877396] ATOM BIOS: B27732 [ 18.877416] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used) [ 18.877419] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 18.877619] [drm] Detected VRAM RAM=256M, BAR=256M [ 18.877622] [drm] RAM width 32bits DDR [ 18.878594] [TTM] Zone kernel: Available graphics memory: 896918 kiB. [ 18.878596] [TTM] Initializing pool allocator. [ 18.878615] [drm] radeon: 256M of VRAM memory ready [ 18.878617] [drm] radeon: 512M of GTT memory ready. [ 18.878628] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 18.878630] [drm] Driver supports precise vblank timestamp query. [ 18.878645] [drm] radeon: irq initialized. [ 18.878649] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 18.879926] [drm] Loading RS780 Microcode [ 18.947125] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.069307] radeon 0000:01:05.0: WB enabled [ 19.100298] [drm] ring test succeeded in 1 usecs [ 19.100385] [drm] radeon: ib pool ready. [ 19.100439] [drm] ib test succeeded in 0 usecs [ 19.100444] failed to evaluate ATIF got AE_BAD_PARAMETER [ 19.100602] [drm] Radeon Display Connectors [ 19.100603] [drm] Connector 0: [ 19.100604] [drm] VGA [ 19.100606] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 19.100607] [drm] Encoders: [ 19.100608] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 19.100609] [drm] Connector 1: [ 19.100610] [drm] DVI-D [ 19.100611] [drm] HPD1 [ 19.100612] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 19.100613] [drm] Encoders: [ 19.100614] [drm] DFP1: INTERNAL_KLDSCP_LVTMA [ 19.152570] [drm] Radeon display connector VGA-1: Found valid EDID [ 19.162182] [drm] Radeon display connector DVI-D-1: No monitor connected or invalid EDID [ 19.162200] [drm] radeon: power management initialized [ 19.225860] [drm] fb mappable at 0xD0141000 [ 19.225863] [drm] vram apper at 0xD0000000 [ 19.225864] [drm] size 3145728 [ 19.225865] [drm] fb depth is 24 [ 19.225866] [drm] pitch is 4096 [ 19.225944] fbcon: radeondrmfb (fb0) is primary device [ 19.226013] Console: switching to colour frame buffer device 128x48 [ 19.226028] fb0: radeondrmfb frame buffer device [ 19.226029] drm: registered panic notifier [ 19.226035] [drm] Initialized radeon 2.10.0 20080528 for 0000:01:05.0 on minor 0 [ 20.647100] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 20.688189] it821x: can't process command 0xE7 [ 20.688221] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 20.688225] ata7.00: failed command: FLUSH CACHE [ 20.688229] ata7.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 20.688229] res 50/04:01:01:00:00/00:00:00:00:00/00 Emask 0x1 (device error) [ 20.688232] ata7.00: status: { DRDY } [ 20.688233] ata7.00: error: { ABRT } [ 20.696453] ata7.00: configured for DMA [ 20.696462] ata7: EH complete [ 20.696472] it821x: can't process command 0xE7 [ 20.696491] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 20.696494] ata7.00: failed command: FLUSH CACHE [ 20.696498] ata7.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 20.696499] res 50/04:01:01:00:00/00:00:00:00:00/00 Emask 0x1 (device error) [ 20.696501] ata7.00: status: { DRDY } [ 20.696502] ata7.00: error: { ABRT } [ 20.704458] ata7.00: configured for DMA [ 20.704467] ata7: EH complete [ 20.704477] it821x: can't process command 0xE7 [ 20.704496] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 20.704499] ata7.00: failed command: FLUSH CACHE [ 20.704502] ata7.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 20.704503] res 50/04:01:01:00:00/00:00:00:00:00/00 Emask 0x1 (device error) [ 20.704505] ata7.00: status: { DRDY } [ 20.704506] ata7.00: error: { ABRT } [ 20.712462] ata7.00: configured for DMA [ 20.712470] ata7: EH complete [ 20.712478] it821x: can't process command 0xE7 [ 20.712497] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 20.712499] ata7.00: failed command: FLUSH CACHE [ 20.712502] ata7.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 20.712503] res 50/04:01:01:00:00/00:00:00:00:00/00 Emask 0x1 (device error) [ 20.712505] ata7.00: status: { DRDY } [ 20.712506] ata7.00: error: { ABRT } [ 20.720452] ata7.00: configured for DMA [ 20.720464] ata7: EH complete [ 20.720472] it821x: can't process command 0xE7 [ 20.720491] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 20.720494] ata7.00: failed command: FLUSH CACHE [ 20.720497] ata7.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 20.720498] res 50/04:01:01:00:00/00:00:00:00:00/00 Emask 0x1 (device error) [ 20.720500] ata7.00: status: { DRDY } [ 20.720501] ata7.00: error: { ABRT } [ 20.728451] ata7.00: configured for DMA [ 20.728463] ata7: EH complete [ 20.728471] it821x: can't process command 0xE7 [ 20.728490] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 20.728492] ata7.00: failed command: FLUSH CACHE [ 20.728496] ata7.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 20.728496] res 50/04:01:01:00:00/00:00:00:00:00/00 Emask 0x1 (device error) [ 20.728498] ata7.00: status: { DRDY } [ 20.728499] ata7.00: error: { ABRT } [ 20.736683] ata7.00: configured for DMA [ 20.736710] ata7: EH complete [ 20.746959] it821x: can't process command 0xE7 [ 20.746993] ata7.00: limiting speed to UDMA/133:PIO6 [ 20.746997] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 20.747000] ata7.00: failed command: FLUSH CACHE [ 20.747003] ata7.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 20.747004] res 50/04:01:01:00:00/00:00:00:00:00/00 Emask 0x1 (device error) [ 20.747006] ata7.00: status: { DRDY } [ 20.747007] ata7.00: error: { ABRT } [ 20.747017] ata7: soft resetting link [ 21.916432] ata7.00: configured for DMA [ 21.916442] ata7: EH complete [ 21.916450] it821x: can't process command 0xE7 [ 21.916470] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 21.916473] ata7.00: failed command: FLUSH CACHE [ 21.916476] ata7.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 21.916477] res 50/04:01:01:00:00/00:00:00:00:00/00 Emask 0x1 (device error) [ 21.916479] ata7.00: status: { DRDY } [ 21.916480] ata7.00: error: { ABRT } [ 21.924454] ata7.00: configured for DMA [ 21.924463] ata7: EH complete [ 21.924472] it821x: can't process command 0xE7 [ 21.924491] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 21.924494] ata7.00: failed command: FLUSH CACHE [ 21.924498] ata7.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 21.924498] res 50/04:01:01:00:00/00:00:00:00:00/00 Emask 0x1 (device error) [ 21.924500] ata7.00: status: { DRDY } [ 21.924501] ata7.00: error: { ABRT } [ 21.932450] ata7.00: configured for DMA [ 21.932459] ata7: EH complete [ 21.932467] it821x: can't process command 0xE7 [ 21.932486] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 21.932488] ata7.00: failed command: FLUSH CACHE [ 21.932492] ata7.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 21.932492] res 50/04:01:01:00:00/00:00:00:00:00/00 Emask 0x1 (device error) [ 21.932494] ata7.00: status: { DRDY } [ 21.932495] ata7.00: error: { ABRT } [ 21.940457] ata7.00: configured for DMA [ 21.940469] ata7: EH complete [ 21.940478] it821x: can't process command 0xE7 [ 21.940497] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 21.940499] ata7.00: failed command: FLUSH CACHE [ 21.940502] ata7.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 21.940503] res 50/04:01:01:00:00/00:00:00:00:00/00 Emask 0x1 (device error) [ 21.940505] ata7.00: status: { DRDY } [ 21.940506] ata7.00: error: { ABRT } [ 21.948446] ata7.00: configured for DMA [ 21.948458] ata7: EH complete [ 21.948465] it821x: can't process command 0xE7 [ 21.948484] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 21.948486] ata7.00: failed command: FLUSH CACHE [ 21.948490] ata7.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 21.948490] res 50/04:01:01:00:00/00:00:00:00:00/00 Emask 0x1 (device error) [ 21.948492] ata7.00: status: { DRDY } [ 21.948493] ata7.00: error: { ABRT } [ 21.956439] ata7.00: configured for DMA [ 21.956467] ata7: EH complete [ 22.121336] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 22.237240] ppdev: user-space parallel port driver [ 22.245857] type=1400 audit(1326787187.824:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=886 comm="apparmor_parser" [ 22.246480] type=1400 audit(1326787187.824:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=886 comm="apparmor_parser" [ 22.356614] type=1400 audit(1326787187.936:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=902 comm="apparmor_parser" [ 22.357881] type=1400 audit(1326787187.936:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=901 comm="apparmor_parser" [ 22.358641] type=1400 audit(1326787187.936:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=902 comm="apparmor_parser" [ 22.358872] type=1400 audit(1326787187.936:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=902 comm="apparmor_parser" [ 22.367379] type=1400 audit(1326787187.944:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=903 comm="apparmor_parser" [ 22.449481] r8169 0000:02:00.0: eth0: link down [ 22.449497] r8169 0000:02:00.0: eth0: link down [ 22.452580] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.473572] init: failsafe main process (820) killed by TERM signal [ 22.475341] init: apport pre-start process (942) terminated with status 1 [ 22.487340] init: apport post-stop process (971) terminated with status 1 [ 22.682446] Bluetooth: Core ver 2.16 [ 22.682472] NET: Registered protocol family 31 [ 22.682473] Bluetooth: HCI device and connection manager initialized [ 22.682476] Bluetooth: HCI socket layer initialized [ 22.682477] Bluetooth: L2CAP socket layer initialized [ 22.683099] Bluetooth: SCO socket layer initialized [ 22.684776] Bluetooth: RFCOMM TTY layer initialized [ 22.684781] Bluetooth: RFCOMM socket layer initialized [ 22.684782] Bluetooth: RFCOMM ver 1.11