[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-22-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:28:05 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=8e8798b2-f11c-4ebf-b4bc-0701827d659d ro video=uvesafb:mode_option=1280x800-24, mtrr=3, scroll=ywrap [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007b27c000 (usable) [ 0.000000] BIOS-e820: 000000007b27c000 - 000000007b282000 (reserved) [ 0.000000] BIOS-e820: 000000007b282000 - 000000007b35f000 (usable) [ 0.000000] BIOS-e820: 000000007b35f000 - 000000007b371000 (reserved) [ 0.000000] BIOS-e820: 000000007b371000 - 000000007b3f2000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007b3f2000 - 000000007b40f000 (reserved) [ 0.000000] BIOS-e820: 000000007b40f000 - 000000007b46f000 (usable) [ 0.000000] BIOS-e820: 000000007b46f000 - 000000007b668000 (reserved) [ 0.000000] BIOS-e820: 000000007b668000 - 000000007b6e8000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007b6e8000 - 000000007b70f000 (reserved) [ 0.000000] BIOS-e820: 000000007b70f000 - 000000007b717000 (usable) [ 0.000000] BIOS-e820: 000000007b717000 - 000000007b71f000 (reserved) [ 0.000000] BIOS-e820: 000000007b71f000 - 000000007b76c000 (usable) [ 0.000000] BIOS-e820: 000000007b76c000 - 000000007b778000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007b778000 - 000000007b77b000 (ACPI data) [ 0.000000] BIOS-e820: 000000007b77b000 - 000000007b78b000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007b78b000 - 000000007b78c000 (ACPI data) [ 0.000000] BIOS-e820: 000000007b78c000 - 000000007b79f000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007b79f000 - 000000007b7ff000 (ACPI data) [ 0.000000] BIOS-e820: 000000007b7ff000 - 000000007b800000 (usable) [ 0.000000] BIOS-e820: 000000007b800000 - 000000007c000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7b800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-DBFFF uncachable [ 0.000000] DC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 disabled [ 0.000000] 1 base 07C000000 mask FFC000000 uncachable [ 0.000000] 2 base 000000000 mask F80000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009e800 (usable) [ 0.000000] modified: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007b27c000 (usable) [ 0.000000] modified: 000000007b27c000 - 000000007b282000 (reserved) [ 0.000000] modified: 000000007b282000 - 000000007b35f000 (usable) [ 0.000000] modified: 000000007b35f000 - 000000007b371000 (reserved) [ 0.000000] modified: 000000007b371000 - 000000007b3f2000 (ACPI NVS) [ 0.000000] modified: 000000007b3f2000 - 000000007b40f000 (reserved) [ 0.000000] modified: 000000007b40f000 - 000000007b46f000 (usable) [ 0.000000] modified: 000000007b46f000 - 000000007b668000 (reserved) [ 0.000000] modified: 000000007b668000 - 000000007b6e8000 (ACPI NVS) [ 0.000000] modified: 000000007b6e8000 - 000000007b70f000 (reserved) [ 0.000000] modified: 000000007b70f000 - 000000007b717000 (usable) [ 0.000000] modified: 000000007b717000 - 000000007b71f000 (reserved) [ 0.000000] modified: 000000007b71f000 - 000000007b76c000 (usable) [ 0.000000] modified: 000000007b76c000 - 000000007b778000 (ACPI NVS) [ 0.000000] modified: 000000007b778000 - 000000007b77b000 (ACPI data) [ 0.000000] modified: 000000007b77b000 - 000000007b78b000 (ACPI NVS) [ 0.000000] modified: 000000007b78b000 - 000000007b78c000 (ACPI data) [ 0.000000] modified: 000000007b78c000 - 000000007b79f000 (ACPI NVS) [ 0.000000] modified: 000000007b79f000 - 000000007b7ff000 (ACPI data) [ 0.000000] modified: 000000007b7ff000 - 000000007b800000 (usable) [ 0.000000] modified: 000000007b800000 - 000000007c000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000feaff000 - 00000000feb00000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007b800000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 007b800000 page 2M [ 0.000000] kernel direct mapping tables up to 7b800000 @ 8000-b000 [ 0.000000] RAMDISK: 375ad000 - 37fef62e [ 0.000000] ACPI: RSDP 00000000000f6880 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 000000007b7ef5f0 00094 (v01 LENOVO TP-6I 00001180 LTP 00000000) [ 0.000000] ACPI: FACP 000000007b7ef700 000F4 (v04 LENOVO TP-6I 00001180 LNVO 00000001) [ 0.000000] ACPI: DSDT 000000007b7efad1 0F040 (v01 LENOVO TP-6I 00001180 MSFT 03000001) [ 0.000000] ACPI: FACS 000000007b6e7000 00040 [ 0.000000] ACPI: SSDT 000000007b7ef8b4 0021D (v01 LENOVO TP-6I 00001180 MSFT 03000001) [ 0.000000] ACPI: ECDT 000000007b7feb11 00052 (v01 LENOVO TP-6I 00001180 LNVO 00000001) [ 0.000000] ACPI: APIC 000000007b7feb63 00084 (v01 LENOVO TP-6I 00001180 LNVO 00000001) [ 0.000000] ACPI: MCFG 000000007b7fec1f 0003C (v01 LENOVO TP-6I 00001180 LNVO 00000001) [ 0.000000] ACPI: HPET 000000007b7fec5b 00038 (v01 LENOVO TP-6I 00001180 LNVO 00000001) [ 0.000000] ACPI: ASF! 000000007b7fedbe 000A4 (v16 LENOVO TP-6I 00001180 PTL 00000001) [ 0.000000] ACPI: SLIC 000000007b7fee62 00176 (v01 LENOVO TP-6I 00001180 LTP 00000000) [ 0.000000] ACPI: BOOT 000000007b7fefd8 00028 (v01 LENOVO TP-6I 00001180 LTP 00000001) [ 0.000000] ACPI: SSDT 000000007b6e591a 0084B (v01 LENOVO TP-6I 00001180 INTL 20050513) [ 0.000000] ACPI: TCPA 000000007b78b000 00032 (v02 PTL CRESTLN 06040000 00005A52) [ 0.000000] ACPI: SSDT 000000007b77a000 009F1 (v01 PmRef CpuPm 00003000 INTL 20050513) [ 0.000000] ACPI: SSDT 000000007b779000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050513) [ 0.000000] ACPI: SSDT 000000007b778000 0049F (v01 PmRef ApTst 00003000 INTL 20050513) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007b800000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007b800000 [ 0.000000] NODE_DATA [0000000000009000 - 000000000000dfff] [ 0.000000] bootmap [000000000000e000 - 000000000001d6ff] pages 10 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007b800000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a29e64] TEXT DATA BSS ==> [0001000000 - 0001a29e64] [ 0.000000] #3 [00375ad000 - 0037fef62e] RAMDISK ==> [00375ad000 - 0037fef62e] [ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000] [ 0.000000] #5 [0001a2a000 - 0001a2a144] BRK ==> [0001a2a000 - 0001a2a144] [ 0.000000] #6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] [ 0.000000] found SMP MP-table at [ffff8800000f68c0] f68c0 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[8] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x0007b27c [ 0.000000] 0: 0x0007b282 -> 0x0007b35f [ 0.000000] 0: 0x0007b40f -> 0x0007b46f [ 0.000000] 0: 0x0007b70f -> 0x0007b717 [ 0.000000] 0: 0x0007b71f -> 0x0007b76c [ 0.000000] 0: 0x0007b7ff -> 0x0007b800 [ 0.000000] On node 0 totalpages: 504744 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 101 pages reserved [ 0.000000] DMA zone: 3836 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6860 pages used for memmap [ 0.000000] DMA32 zone: 493891 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000007b27c000 - 000000007b282000 [ 0.000000] PM: Registered nosave memory: 000000007b35f000 - 000000007b371000 [ 0.000000] PM: Registered nosave memory: 000000007b371000 - 000000007b3f2000 [ 0.000000] PM: Registered nosave memory: 000000007b3f2000 - 000000007b40f000 [ 0.000000] PM: Registered nosave memory: 000000007b46f000 - 000000007b668000 [ 0.000000] PM: Registered nosave memory: 000000007b668000 - 000000007b6e8000 [ 0.000000] PM: Registered nosave memory: 000000007b6e8000 - 000000007b70f000 [ 0.000000] PM: Registered nosave memory: 000000007b717000 - 000000007b71f000 [ 0.000000] PM: Registered nosave memory: 000000007b76c000 - 000000007b778000 [ 0.000000] PM: Registered nosave memory: 000000007b778000 - 000000007b77b000 [ 0.000000] PM: Registered nosave memory: 000000007b77b000 - 000000007b78b000 [ 0.000000] PM: Registered nosave memory: 000000007b78b000 - 000000007b78c000 [ 0.000000] PM: Registered nosave memory: 000000007b78c000 - 000000007b79f000 [ 0.000000] PM: Registered nosave memory: 000000007b79f000 - 000000007b7ff000 [ 0.000000] Allocating PCI resources starting at 7c000000 (gap: 7c000000:64000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 497727 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=8e8798b2-f11c-4ebf-b4bc-0701827d659d ro video=uvesafb:mode_option=1280x800-24, mtrr=3, scroll=ywrap [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 1968728k/2023424k available (5409k kernel code, 4448k absent, 50248k reserved, 2976k data, 876k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 20971520 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] alloc irq_desc for 24 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] alloc irq_desc for 25 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] alloc irq_desc for 26 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] alloc irq_desc for 27 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] HPET: 8 timers in total, 4 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.010000] Detected 2393.908 MHz processor. [ 0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.81 BogoMIPS (lpj=23939080) [ 0.000191] Security Framework initialized [ 0.000293] AppArmor: AppArmor initialized [ 0.000652] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001541] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.001984] Mount-cache hash table entries: 256 [ 0.002223] Initializing cgroup subsys ns [ 0.002306] Initializing cgroup subsys cpuacct [ 0.002387] Initializing cgroup subsys memory [ 0.002472] Initializing cgroup subsys devices [ 0.002556] Initializing cgroup subsys freezer [ 0.002634] Initializing cgroup subsys net_cls [ 0.002735] CPU: Physical Processor ID: 0 [ 0.002816] CPU: Processor Core ID: 0 [ 0.002896] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003034] CPU: L2 cache: 256K [ 0.003109] CPU: L3 cache: 3072K [ 0.003187] CPU 0/0x0 -> Node 0 [ 0.003267] mce: CPU supports 9 MCE banks [ 0.003357] CPU0: Thermal monitoring enabled (TM1) [ 0.003445] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 [ 0.003834] using mwait in idle threads. [ 0.003915] Performance Events: Nehalem/Corei7 events, Intel PMU driver. [ 0.004114] ... version: 3 [ 0.004192] ... bit width: 48 [ 0.004270] ... generic registers: 4 [ 0.004348] ... value mask: 0000ffffffffffff [ 0.004426] ... max period: 000000007fffffff [ 0.004505] ... fixed-purpose events: 3 [ 0.004581] ... event mask: 000000070000000f [ 0.008361] ACPI: Core revision 20090903 [ 0.054502] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.054598] ftrace: allocating 22518 entries in 89 pages [ 0.067534] Setting APIC routing to flat [ 0.068038] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.167965] CPU0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz stepping 02 [ 0.283465] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.293755] Initializing CPU#1 [ 0.443026] CPU: Physical Processor ID: 0 [ 0.443029] CPU: Processor Core ID: 0 [ 0.443034] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.443037] CPU: L2 cache: 256K [ 0.443040] CPU: L3 cache: 3072K [ 0.443045] CPU 1/0x1 -> Node 0 [ 0.443065] CPU1: Thermal monitoring enabled (TM1) [ 0.443071] CPU 1 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 [ 0.443171] CPU1: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz stepping 02 [ 0.444131] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.464392] Booting processor 2 APIC 0x4 ip 0x6000 [ 0.474735] Initializing CPU#2 [ 0.622712] CPU: Physical Processor ID: 0 [ 0.622715] CPU: Processor Core ID: 2 [ 0.622719] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.622722] CPU: L2 cache: 256K [ 0.622724] CPU: L3 cache: 3072K [ 0.622727] CPU 2/0x4 -> Node 0 [ 0.622746] CPU2: Thermal monitoring enabled (TM1) [ 0.622751] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 [ 0.622788] CPU2: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz stepping 02 [ 0.623720] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.643974] Booting processor 3 APIC 0x5 ip 0x6000 [ 0.654318] Initializing CPU#3 [ 0.802401] CPU: Physical Processor ID: 0 [ 0.802403] CPU: Processor Core ID: 2 [ 0.802407] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.802410] CPU: L2 cache: 256K [ 0.802411] CPU: L3 cache: 3072K [ 0.802415] CPU 3/0x5 -> Node 0 [ 0.802433] CPU3: Thermal monitoring enabled (TM1) [ 0.802438] CPU 3 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 [ 0.802470] CPU3: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz stepping 02 [ 0.803403] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.823543] Brought up 4 CPUs [ 0.823628] Total of 4 processors activated (19151.83 BogoMIPS). [ 0.825716] CPU0 attaching sched-domain: [ 0.825721] domain 0: span 0-1 level SIBLING [ 0.825725] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 0.825733] domain 1: span 0-3 level MC [ 0.825737] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 0.825748] CPU1 attaching sched-domain: [ 0.825751] domain 0: span 0-1 level SIBLING [ 0.825754] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 0.825761] domain 1: span 0-3 level MC [ 0.825764] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 0.825773] CPU2 attaching sched-domain: [ 0.825776] domain 0: span 2-3 level SIBLING [ 0.825779] groups: 2 (cpu_power = 589) 3 (cpu_power = 589) [ 0.825786] domain 1: span 0-3 level MC [ 0.825789] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 0.825798] CPU3 attaching sched-domain: [ 0.825800] domain 0: span 2-3 level SIBLING [ 0.825804] groups: 3 (cpu_power = 589) 2 (cpu_power = 589) [ 0.825811] domain 1: span 0-3 level MC [ 0.825814] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 0.826186] devtmpfs: initialized [ 0.826826] regulator: core version 0.5 [ 0.826942] Time: 10:21:23 Date: 05/15/10 [ 0.827085] NET: Registered protocol family 16 [ 0.827301] Trying to unpack rootfs image as initramfs... [ 0.827348] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.827352] ACPI: bus type pci registered [ 0.827450] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.827454] PCI: MCFG area at e0000000 reserved in E820 [ 0.838887] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.838979] PCI: Using configuration type 1 for base access [ 0.840267] bio: create slab at 0 [ 0.842453] ACPI: EC: EC description table is found, configuring boot EC [ 0.854236] ACPI: BIOS _OSI(Linux) query ignored [ 0.950995] ACPI: Interpreter enabled [ 0.951085] ACPI: (supports S0 S3 S4 S5) [ 0.951436] ACPI: Using IOAPIC for interrupt routing [ 0.972770] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.973132] ACPI: Power Resource [PUBS] (on) [ 0.975709] ACPI: ACPI Dock Station Driver: 2 docks/bays found [ 0.975826] ACPI: PCI Root Bridge [UNCR] (0000:ff) [ 0.976839] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.977064] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.977158] pci 0000:00:01.0: PME# disabled [ 0.977362] pci 0000:00:16.0: reg 10 64bit mmio: [0xf2427800-0xf242780f] [ 0.977441] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.977536] pci 0000:00:16.0: PME# disabled [ 0.977708] pci 0000:00:19.0: reg 10 32bit mmio: [0xf2400000-0xf241ffff] [ 0.977719] pci 0000:00:19.0: reg 14 32bit mmio: [0xf2425000-0xf2425fff] [ 0.977730] pci 0000:00:19.0: reg 18 io port: [0x1820-0x183f] [ 0.977797] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.977894] pci 0000:00:19.0: PME# disabled [ 0.978054] pci 0000:00:1a.0: reg 10 32bit mmio: [0xf2428000-0xf24283ff] [ 0.978137] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.978230] pci 0000:00:1a.0: PME# disabled [ 0.978380] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf2420000-0xf2423fff] [ 0.978454] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.978549] pci 0000:00:1b.0: PME# disabled [ 0.978744] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.978838] pci 0000:00:1c.0: PME# disabled [ 0.979036] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.979130] pci 0000:00:1c.1: PME# disabled [ 0.979328] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.979422] pci 0000:00:1c.3: PME# disabled [ 0.979619] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.979714] pci 0000:00:1c.4: PME# disabled [ 0.979886] pci 0000:00:1d.0: reg 10 32bit mmio: [0xf2428400-0xf24287ff] [ 0.979967] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.980062] pci 0000:00:1d.0: PME# disabled [ 0.980424] pci 0000:00:1f.2: reg 10 io port: [0x1818-0x181f] [ 0.980435] pci 0000:00:1f.2: reg 14 io port: [0x180c-0x180f] [ 0.980445] pci 0000:00:1f.2: reg 18 io port: [0x1810-0x1817] [ 0.980455] pci 0000:00:1f.2: reg 1c io port: [0x1808-0x180b] [ 0.980465] pci 0000:00:1f.2: reg 20 io port: [0x1840-0x185f] [ 0.980475] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf2427000-0xf24277ff] [ 0.980530] pci 0000:00:1f.2: PME# supported from D3hot [ 0.980622] pci 0000:00:1f.2: PME# disabled [ 0.980756] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf2428800-0xf24288ff] [ 0.980780] pci 0000:00:1f.3: reg 20 io port: [0x1860-0x187f] [ 0.980870] pci 0000:00:1f.6: reg 10 64bit mmio: [0xf2426000-0xf2426fff] [ 0.981002] pci 0000:01:00.0: reg 10 32bit mmio: [0xcc000000-0xccffffff] [ 0.981019] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.981035] pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xce000000-0xcfffffff] [ 0.981046] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f] [ 0.981056] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff] [ 0.981162] pci 0000:01:00.1: reg 10 32bit mmio: [0xcdefc000-0xcdefffff] [ 0.981330] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] [ 0.981335] pci 0000:00:01.0: bridge 32bit mmio: [0xcc000000-0xcdefffff] [ 0.981341] pci 0000:00:01.0: bridge 64bit mmio pref: [0xce000000-0xdfffffff] [ 0.981538] pci 0000:03:00.0: reg 10 64bit mmio: [0xf2000000-0xf2001fff] [ 0.981664] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.981762] pci 0000:03:00.0: PME# disabled [ 0.981954] pci 0000:00:1c.1: bridge 32bit mmio: [0xf2000000-0xf20fffff] [ 0.982046] pci 0000:00:1c.3: bridge io port: [0x3000-0x3fff] [ 0.982053] pci 0000:00:1c.3: bridge 32bit mmio: [0xf0000000-0xf1ffffff] [ 0.982063] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf2500000-0xf25fffff] [ 0.982192] pci 0000:0d:00.0: reg 10 32bit mmio: [0xf2100000-0xf21000ff] [ 0.982311] pci 0000:0d:00.0: supports D1 D2 [ 0.982314] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.982458] pci 0000:0d:00.0: PME# disabled [ 0.982679] pci 0000:0d:00.1: reg 10 32bit mmio: [0xf2100400-0xf21004ff] [ 0.982796] pci 0000:0d:00.1: supports D1 D2 [ 0.982798] pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.982941] pci 0000:0d:00.1: PME# disabled [ 0.983160] pci 0000:0d:00.3: reg 10 32bit mmio: [0xf2100800-0xf2100fff] [ 0.983277] pci 0000:0d:00.3: supports D1 D2 [ 0.983280] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.983428] pci 0000:0d:00.3: PME# disabled [ 0.983666] pci 0000:00:1c.4: bridge 32bit mmio: [0xf2100000-0xf21fffff] [ 0.983756] pci 0000:00:1e.0: transparent bridge [ 0.983902] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.984183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT] [ 0.984332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.984461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.984593] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.984732] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] [ 0.992537] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.993518] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.994466] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.995562] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.996532] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.997501] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.998446] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.999544] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 1.000423] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.000535] vgaarb: loaded [ 1.000770] SCSI subsystem initialized [ 1.001007] libata version 3.00 loaded. [ 1.001118] usbcore: registered new interface driver usbfs [ 1.001223] usbcore: registered new interface driver hub [ 1.001352] usbcore: registered new device driver usb [ 1.001679] ACPI: WMI: Mapper loaded [ 1.001766] PCI: Using ACPI for IRQ routing [ 1.002238] NetLabel: Initializing [ 1.002325] NetLabel: domain hash size = 128 [ 1.002408] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.002507] NetLabel: unlabeled traffic allowed by default [ 1.002650] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 0, 0 [ 1.003239] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.012063] hpet: hpet2 irq 24 for MSI [ 1.013341] hpet: hpet3 irq 25 for MSI [ 1.023249] hpet: hpet4 irq 26 for MSI [ 1.033428] hpet: hpet5 irq 27 for MSI [ 1.033443] Switching to clocksource tsc [ 1.036286] AppArmor: AppArmor Filesystem Enabled [ 1.036392] pnp: PnP ACPI init [ 1.036496] ACPI: bus type pnp registered [ 1.044999] pnp: PnP ACPI: found 12 devices [ 1.045089] ACPI: ACPI bus type pnp unregistered [ 1.045188] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 1.045281] system 00:00: iomem range 0xc0000-0xc3fff has been reserved [ 1.045371] system 00:00: iomem range 0xc4000-0xc7fff has been reserved [ 1.045462] system 00:00: iomem range 0xc8000-0xcbfff has been reserved [ 1.045552] system 00:00: iomem range 0xcc000-0xcffff has been reserved [ 1.045641] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved [ 1.045733] system 00:00: iomem range 0xdc000-0xdffff could not be reserved [ 1.045824] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 1.045914] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 1.046005] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 1.046094] system 00:00: iomem range 0xec000-0xeffff could not be reserved [ 1.046185] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 1.046277] system 00:00: iomem range 0x100000-0x7bffffff could not be reserved [ 1.046387] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved [ 1.046501] system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved [ 1.046618] system 00:03: ioport range 0x164e-0x164f has been reserved [ 1.046711] system 00:03: ioport range 0x1000-0x107f has been reserved [ 1.046800] system 00:03: ioport range 0x1180-0x11ff has been reserved [ 1.046890] system 00:03: ioport range 0x800-0x80f has been reserved [ 1.046980] system 00:03: ioport range 0x15e0-0x15ef has been reserved [ 1.047069] system 00:03: ioport range 0x1600-0x1641 has been reserved [ 1.047158] system 00:03: ioport range 0x1644-0x167f could not be reserved [ 1.047249] system 00:03: iomem range 0xe0000000-0xefffffff has been reserved [ 1.047341] system 00:03: iomem range 0xfeaff000-0xfeafffff has been reserved [ 1.047434] system 00:03: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 1.047525] system 00:03: iomem range 0xfed10000-0xfed13fff has been reserved [ 1.047617] system 00:03: iomem range 0xfed18000-0xfed18fff has been reserved [ 1.047708] system 00:03: iomem range 0xfed19000-0xfed19fff has been reserved [ 1.047800] system 00:03: iomem range 0xfed45000-0xfed4bfff has been reserved [ 1.052731] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.052823] pci 0000:00:01.0: IO window: 0x2000-0x2fff [ 1.052911] pci 0000:00:01.0: MEM window: 0xcc000000-0xcdefffff [ 1.053001] pci 0000:00:01.0: PREFETCH window: 0x000000ce000000-0x000000dfffffff [ 1.053114] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 1.053205] pci 0000:00:1c.0: IO window: disabled [ 1.053299] pci 0000:00:1c.0: MEM window: disabled [ 1.053391] pci 0000:00:1c.0: PREFETCH window: disabled [ 1.053485] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 1.053576] pci 0000:00:1c.1: IO window: disabled [ 1.053666] pci 0000:00:1c.1: MEM window: 0xf2000000-0xf20fffff [ 1.053759] pci 0000:00:1c.1: PREFETCH window: disabled [ 1.053857] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 [ 1.053947] pci 0000:00:1c.3: IO window: 0x3000-0x3fff [ 1.054038] pci 0000:00:1c.3: MEM window: 0xf0000000-0xf1ffffff [ 1.054134] pci 0000:00:1c.3: PREFETCH window: 0x000000f2500000-0x000000f25fffff [ 1.054252] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d [ 1.054342] pci 0000:00:1c.4: IO window: disabled [ 1.054431] pci 0000:00:1c.4: MEM window: 0xf2100000-0xf21fffff [ 1.054524] pci 0000:00:1c.4: PREFETCH window: disabled [ 1.054621] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0e [ 1.054711] pci 0000:00:1e.0: IO window: disabled [ 1.054801] pci 0000:00:1e.0: MEM window: disabled [ 1.054892] pci 0000:00:1e.0: PREFETCH window: disabled [ 1.054999] alloc irq_desc for 16 on node -1 [ 1.055002] alloc kstat_irqs on node -1 [ 1.055010] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.055106] pci 0000:00:01.0: setting latency timer to 64 [ 1.055119] alloc irq_desc for 20 on node -1 [ 1.055121] alloc kstat_irqs on node -1 [ 1.055126] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.055222] pci 0000:00:1c.0: setting latency timer to 64 [ 1.055236] alloc irq_desc for 21 on node -1 [ 1.055238] alloc kstat_irqs on node -1 [ 1.055244] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.055339] pci 0000:00:1c.1: setting latency timer to 64 [ 1.055353] alloc irq_desc for 23 on node -1 [ 1.055356] alloc kstat_irqs on node -1 [ 1.055361] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 1.055456] pci 0000:00:1c.3: setting latency timer to 64 [ 1.055471] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.055569] pci 0000:00:1c.4: setting latency timer to 64 [ 1.055580] pci 0000:00:1e.0: setting latency timer to 64 [ 1.055587] pci_bus 0000:ff: resource 0 io: [0x00-0xffff] [ 1.055591] pci_bus 0000:ff: resource 1 mem: [0x000000-0xffffffffffffffff] [ 1.055595] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.055599] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 1.055603] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] [ 1.055606] pci_bus 0000:01: resource 1 mem: [0xcc000000-0xcdefffff] [ 1.055610] pci_bus 0000:01: resource 2 pref mem [0xce000000-0xdfffffff] [ 1.055614] pci_bus 0000:03: resource 1 mem: [0xf2000000-0xf20fffff] [ 1.055618] pci_bus 0000:05: resource 0 io: [0x3000-0x3fff] [ 1.055622] pci_bus 0000:05: resource 1 mem: [0xf0000000-0xf1ffffff] [ 1.055625] pci_bus 0000:05: resource 2 pref mem [0xf2500000-0xf25fffff] [ 1.055629] pci_bus 0000:0d: resource 1 mem: [0xf2100000-0xf21fffff] [ 1.055633] pci_bus 0000:0e: resource 3 io: [0x00-0xffff] [ 1.055637] pci_bus 0000:0e: resource 4 mem: [0x000000-0xffffffffffffffff] [ 1.055692] NET: Registered protocol family 2 [ 1.055978] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 1.057015] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 1.059763] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.060476] TCP: Hash tables configured (established 262144 bind 65536) [ 1.060570] TCP reno registered [ 1.060770] NET: Registered protocol family 1 [ 1.060985] pci 0000:01:00.0: Boot video device [ 1.061083] Simple Boot Flag at 0x35 set to 0x1 [ 1.061634] Scanning for low memory corruption every 60 seconds [ 1.061907] audit: initializing netlink socket (disabled) [ 1.062007] type=2000 audit(1273918882.848:1): initialized [ 1.079026] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.081332] VFS: Disk quotas dquot_6.5.2 [ 1.081503] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.082555] fuse init (API version 7.13) [ 1.082761] msgmni has been set to 3845 [ 1.083178] alg: No test for stdrng (krng) [ 1.083355] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.083470] io scheduler noop registered [ 1.083553] io scheduler anticipatory registered [ 1.083637] io scheduler deadline registered [ 1.083776] io scheduler cfq registered (default) [ 1.084050] alloc irq_desc for 28 on node -1 [ 1.084053] alloc kstat_irqs on node -1 [ 1.084065] pcieport 0000:00:01.0: irq 28 for MSI/MSI-X [ 1.084073] pcieport 0000:00:01.0: setting latency timer to 64 [ 1.084222] alloc irq_desc for 29 on node -1 [ 1.084224] alloc kstat_irqs on node -1 [ 1.084237] pcieport 0000:00:1c.0: irq 29 for MSI/MSI-X [ 1.084251] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.084411] alloc irq_desc for 30 on node -1 [ 1.084413] alloc kstat_irqs on node -1 [ 1.084426] pcieport 0000:00:1c.1: irq 30 for MSI/MSI-X [ 1.084439] pcieport 0000:00:1c.1: setting latency timer to 64 [ 1.084597] alloc irq_desc for 31 on node -1 [ 1.084600] alloc kstat_irqs on node -1 [ 1.084612] pcieport 0000:00:1c.3: irq 31 for MSI/MSI-X [ 1.084626] pcieport 0000:00:1c.3: setting latency timer to 64 [ 1.084797] alloc irq_desc for 32 on node -1 [ 1.084800] alloc kstat_irqs on node -1 [ 1.084812] pcieport 0000:00:1c.4: irq 32 for MSI/MSI-X [ 1.084825] pcieport 0000:00:1c.4: setting latency timer to 64 [ 1.084929] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.085040] Firmware did not grant requested _OSC control [ 1.085101] Firmware did not grant requested _OSC control [ 1.085131] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.085562] ACPI: AC Adapter [AC] (off-line) [ 1.085742] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.086084] ACPI: Lid Switch [LID] [ 1.086229] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.086345] ACPI: Sleep Button [SLPB] [ 1.086501] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.086610] ACPI: Power Button [PWRF] [ 1.088138] ACPI: SSDT 000000007b71aa18 0046F (v01 PmRef Cpu0Ist 00003000 INTL 20050513) [ 1.089347] ACPI: SSDT 000000007b718718 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20050513) [ 1.094061] Monitor-Mwait will be used to enter C-1 state [ 1.094104] Monitor-Mwait will be used to enter C-2 state [ 1.094136] Monitor-Mwait will be used to enter C-3 state [ 1.094199] processor LNXCPU:00: registered as cooling_device0 [ 1.095167] ACPI: SSDT 000000007b719a98 00303 (v01 PmRef ApIst 00003000 INTL 20050513) [ 1.096273] ACPI: SSDT 000000007b717d98 00119 (v01 PmRef ApCst 00003000 INTL 20050513) [ 1.098537] processor LNXCPU:01: registered as cooling_device1 [ 1.101131] processor LNXCPU:02: registered as cooling_device2 [ 1.113359] processor LNXCPU:03: registered as cooling_device3 [ 1.127327] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.127427] ACPI: Thermal Zone [THM0] (47 C) [ 1.129697] Linux agpgart interface v0.103 [ 1.129827] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.131907] brd: module loaded [ 1.132731] loop: module loaded [ 1.132964] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 1.133757] Fixed MDIO Bus: probed [ 1.133894] PPP generic driver version 2.4.2 [ 1.134021] tun: Universal TUN/TAP device driver, 1.6 [ 1.134136] tun: (C) 1999-2004 Max Krasnyansky [ 1.134414] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.135522] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 1.135648] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 1.135796] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.135802] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.135959] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.136139] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.140136] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported [ 1.140163] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf2428000 [ 1.154000] ACPI: Battery Slot [BAT0] (battery present) [ 1.161784] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.162003] usb usb1: configuration #1 chosen from 1 choice [ 1.162130] hub 1-0:1.0: USB hub found [ 1.162222] hub 1-0:1.0: 3 ports detected [ 1.162629] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1.162733] alloc irq_desc for 19 on node -1 [ 1.162736] alloc kstat_irqs on node -1 [ 1.162745] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.162864] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.162869] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.163014] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.163165] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.167124] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported [ 1.167146] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xf2428400 [ 1.183038] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.183252] usb usb2: configuration #1 chosen from 1 choice [ 1.183378] hub 2-0:1.0: USB hub found [ 1.183470] hub 2-0:1.0: 3 ports detected [ 1.183628] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.183738] uhci_hcd: USB Universal Host Controller Interface driver [ 1.183937] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.187052] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.187145] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.187394] mice: PS/2 mouse device common for all mice [ 1.187648] rtc_cmos 00:08: RTC can wake from S4 [ 1.187783] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 1.187921] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.188198] device-mapper: uevent: version 1.0.3 [ 1.188431] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.188689] device-mapper: multipath: version 1.1.0 loaded [ 1.188782] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.189356] cpuidle: using governor ladder [ 1.189733] cpuidle: using governor menu [ 1.190499] TCP cubic registered [ 1.190852] NET: Registered protocol family 10 [ 1.190870] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.191981] lo: Disabled Privacy Extensions [ 1.192696] NET: Registered protocol family 17 [ 1.194937] PM: Resume from disk failed. [ 1.194948] registered taskstats version 1 [ 1.195696] Magic number: 10:3:376 [ 1.196306] rtc_cmos 00:08: setting system clock to 2010-05-15 10:21:23 UTC (1273918883) [ 1.196408] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.196489] EDD information not available. [ 1.274625] Freeing initrd memory: 10505k freed [ 1.277008] Freeing unused kernel memory: 876k freed [ 1.278701] Write protecting the kernel read-only data: 7680k [ 1.294700] udev: starting version 151 [ 1.333997] ahci 0000:00:1f.2: version 3.0 [ 1.334027] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.334196] alloc irq_desc for 33 on node -1 [ 1.334198] alloc kstat_irqs on node -1 [ 1.334212] ahci 0000:00:1f.2: irq 33 for MSI/MSI-X [ 1.334263] ahci: SSS flag set, parallel bus scan disabled [ 1.334396] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode [ 1.334497] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems sxs apst [ 1.334601] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.349423] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 1.349513] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 1.360632] acpi device:0b: registered as cooling_device4 [ 1.360943] ohci1394 0000:0d:00.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.361078] ohci1394 0000:0d:00.3: setting latency timer to 64 [ 1.361340] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input5 [ 1.361548] ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no) [ 1.403446] scsi0 : ahci [ 1.403661] scsi1 : ahci [ 1.403792] scsi2 : ahci [ 1.403914] scsi3 : ahci [ 1.404056] scsi4 : ahci [ 1.404181] scsi5 : ahci [ 1.405226] ata1: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427100 irq 33 [ 1.405320] ata2: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427180 irq 33 [ 1.405409] ata3: DUMMY [ 1.405480] ata4: DUMMY [ 1.405552] ata5: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427300 irq 33 [ 1.405646] ata6: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427380 irq 33 [ 1.405795] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.405897] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.406008] alloc irq_desc for 34 on node -1 [ 1.406013] alloc kstat_irqs on node -1 [ 1.406024] e1000e 0000:00:19.0: irq 34 for MSI/MSI-X [ 1.425200] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[f2100800-f2100fff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.485550] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.637126] usb 1-1: configuration #1 chosen from 1 choice [ 1.637386] hub 1-1:1.0: USB hub found [ 1.637594] hub 1-1:1.0: 6 ports detected [ 1.755076] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 1.889831] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:26:2d:fc:d2:89 [ 1.889926] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.890045] 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: a002ff-0ff [ 1.903057] usb 2-1: configuration #1 chosen from 1 choice [ 1.903376] hub 2-1:1.0: USB hub found [ 1.903585] hub 2-1:1.0: 8 ports detected [ 1.932245] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.933546] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.933553] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.933882] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.933889] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.935275] ata1.00: ATA-8: WDC WD2500BEVT-08A23T1, 02.01A02, max UDMA/133 [ 1.935363] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.936824] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.936830] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.937092] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.937097] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.938363] ata1.00: configured for UDMA/133 [ 1.954799] ata1.00: configured for UDMA/133 [ 1.954883] ata1: EH complete [ 1.955073] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-0 02.0 PQ: 0 ANSI: 5 [ 1.955286] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.955300] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.955361] sd 0:0:0:0: [sda] Write Protect is off [ 1.955363] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.955387] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.955527] sda: sda1 sda2 sda3 sda4 < sda5 [ 2.035981] usb 1-1.4: new full speed USB device using ehci_hcd and address 3 [ 2.047350] sda6 > [ 2.047837] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.149478] usb 1-1.4: configuration #1 chosen from 1 choice [ 2.233143] usb 1-1.6: new high speed USB device using ehci_hcd and address 4 [ 2.347807] usb 1-1.6: configuration #1 chosen from 1 choice [ 2.423428] usb 2-1.1: new high speed USB device using ehci_hcd and address 3 [ 2.538875] usb 2-1.1: configuration #1 chosen from 1 choice [ 2.631269] usb 2-1.3: new high speed USB device using ehci_hcd and address 4 [ 2.752070] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00262dfffcd289ff] [ 2.761864] usb 2-1.3: configuration #1 chosen from 1 choice [ 2.883101] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.889106] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 2.889983] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 2.894913] ata2.00: ATAPI: HL-DT-ST DVDRAM GU10N, MX05, max UDMA/133, ATAPI AN [ 2.900850] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 2.901792] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 2.906647] ata2.00: configured for UDMA/133 [ 2.927410] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GU10N MX05 PQ: 0 ANSI: 5 [ 2.938784] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.938895] Uniform CD-ROM driver Revision: 3.20 [ 2.939054] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.939089] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.279906] ata5: SATA link down (SStatus 0 SControl 300) [ 3.660483] ata6: SATA link down (SStatus 0 SControl 300) [ 4.479087] uvesafb: NVIDIA Corporation, NVIDIA Quadro NVS170M [ 4.479217] , Chip Rev , OEM: NVIDIA, VBE v3.0 [ 4.531844] uvesafb: VBIOS/hardware doesn't support DDC transfers [ 4.531939] uvesafb: no monitor limits have been set, default refresh rate will be used [ 4.532386] uvesafb: scrolling: redraw [ 4.533627] uvesafb: framebuffer at 0xcf000000, mapped to 0xffffc90010a80000, using 8000k, total 14336k [ 4.533730] fb0: VESA VGA frame buffer device [ 4.758409] Console: switching to colour frame buffer device 160x50 [ 10.313723] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 19.674479] udev: starting version 151 [ 19.688308] lp: driver loaded but no devices found [ 19.699739] vga16fb: initializing [ 19.699744] vga16fb: mapped to 0xffff8800000a0000 [ 19.699747] vga16fb: not registering due to another framebuffer present [ 19.779638] sdhci: Secure Digital Host Controller Interface driver [ 19.779641] sdhci: Copyright(c) Pierre Ossman [ 19.781331] cfg80211: Calling CRDA to update world regulatory domain [ 19.781936] type=1505 audit(1273944102.117:2): operation="profile_load" pid=632 name="/sbin/dhclient3" [ 19.782638] type=1505 audit(1273944102.117:3): operation="profile_load" pid=632 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 19.782902] type=1505 audit(1273944102.117:4): operation="profile_load" pid=632 name="/usr/lib/connman/scripts/dhclient-script" [ 19.820381] nvidia: module license 'NVIDIA' taints kernel. [ 19.820385] Disabling lock debugging due to kernel taint [ 19.870745] e1000e 0000:00:19.0: irq 34 for MSI/MSI-X [ 19.898298] cfg80211: World regulatory domain updated: [ 19.898301] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 19.898303] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.898305] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.898307] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.898308] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.898310] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.930538] e1000e 0000:00:19.0: irq 34 for MSI/MSI-X [ 19.930781] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.135388] Bluetooth: Core ver 2.15 [ 20.135568] NET: Registered protocol family 31 [ 20.135570] Bluetooth: HCI device and connection manager initialized [ 20.135573] Bluetooth: HCI socket layer initialized [ 20.138559] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 20.138672] usbcore: registered new interface driver btusb [ 20.142062] Linux video capture interface: v2.00 [ 20.145789] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480f) [ 20.146911] ieee80211_crypt: registered algorithm 'NULL' [ 20.148184] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input6 [ 20.148240] usbcore: registered new interface driver uvcvideo [ 20.148244] USB Video Class driver (v0.1.0) [ 20.155672] [ 20.155674] Linux kernel driver for RTL8187 based WLAN cards [ 20.155677] Copyright (c) 2004-2005, Andrea Merello [ 20.155678] rtl8187: Initializing module [ 20.155680] rtl8187: Wireless extensions version 22 [ 20.155681] rtl8187: Initializing proc filesystem [ 20.156572] Non-volatile memory driver v1.3 [ 20.170406] rtl8187: Enabling 14 channels. [ 20.170899] rtl8187: MAC chip version: 04 [ 20.170900] rtl8187: Card type: AD [ 20.171147] rtl8187: Reported EEPROM chip is a 93c46 (1Kbit) [ 20.174156] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1) [ 20.174181] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.175218] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 20.175227] sdhci-pci 0000:0d:00.0: setting latency timer to 64 [ 20.176292] Registered led device: mmc0:: [ 20.177344] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA [ 20.219597] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k [ 20.219600] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 20.219679] alloc irq_desc for 17 on node -1 [ 20.219682] alloc kstat_irqs on node -1 [ 20.219691] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 20.219700] iwlagn 0000:03:00.0: setting latency timer to 64 [ 20.219738] iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 6050 Series 2x2 AGN REV=0x84 [ 20.240102] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 20.240168] alloc irq_desc for 35 on node -1 [ 20.240170] alloc kstat_irqs on node -1 [ 20.240190] iwlagn 0000:03:00.0: irq 35 for MSI/MSI-X [ 20.240675] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 20.240718] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 20.243893] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 20.243896] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 20.243898] thinkpad_acpi: ThinkPad BIOS 6IET58WW (1.18 ), EC 6IHT33WW-1.07 [ 20.243900] thinkpad_acpi: Lenovo ThinkPad T410, model 2516CTO [ 20.244247] thinkpad_acpi: radio switch found; radios are enabled [ 20.244356] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 20.244359] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 20.249498] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 20.250046] Registered led device: tpacpi::thinklight [ 20.250078] Registered led device: tpacpi::power [ 20.250093] Registered led device: tpacpi::standby [ 20.250108] Registered led device: tpacpi::thinkvantage [ 20.252145] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. [ 20.252238] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 20.255719] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7 [ 20.258555] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 20.273872] type=1505 audit(1273944102.607:5): operation="profile_replace" pid=919 name="/sbin/dhclient3" [ 20.274270] type=1505 audit(1273944102.607:6): operation="profile_replace" pid=919 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 20.274502] type=1505 audit(1273944102.607:7): operation="profile_replace" pid=919 name="/usr/lib/connman/scripts/dhclient-script" [ 20.276416] type=1505 audit(1273944102.607:8): operation="profile_load" pid=920 name="/usr/bin/evince" [ 20.281629] type=1505 audit(1273944102.617:9): operation="profile_load" pid=920 name="/usr/bin/evince-previewer" [ 20.284850] type=1505 audit(1273944102.617:10): operation="profile_load" pid=920 name="/usr/bin/evince-thumbnailer" [ 20.289649] type=1505 audit(1273944102.617:11): operation="profile_load" pid=922 name="/usr/sbin/tcpdump" [ 20.339612] rtl8187: Card MAC address is 00:c0:ca:39:e2:fb [ 20.350535] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-6050-4.ucode [ 20.354563] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 20.354593] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.354604] nvidia 0000:01:00.0: setting latency timer to 64 [ 20.354609] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 20.354721] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.15 Fri Mar 12 00:29:13 PST 2010 [ 20.411925] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.411928] hda_intel: Disable MSI for Nvidia chipset [ 20.411958] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 20.442034] iwlagn 0000:03:00.0: iwlwifi-6050-4.ucode firmware file req failed: -2 [ 20.442082] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-6050-3.ucode [ 20.443399] iwlagn 0000:03:00.0: iwlwifi-6050-3.ucode firmware file req failed: -2 [ 20.443440] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-6050-2.ucode [ 20.444708] iwlagn 0000:03:00.0: iwlwifi-6050-2.ucode firmware file req failed: -2 [ 20.444756] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-6050-1.ucode [ 20.445896] iwlagn 0000:03:00.0: iwlwifi-6050-1.ucode firmware file req failed: -2 [ 20.445947] iwlagn 0000:03:00.0: Could not read microcode: -2 [ 20.455258] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-6050-4.ucode [ 20.456693] iwlagn 0000:03:00.0: iwlwifi-6050-4.ucode firmware file req failed: -2 [ 20.456743] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-6050-3.ucode [ 20.458462] iwlagn 0000:03:00.0: iwlwifi-6050-3.ucode firmware file req failed: -2 [ 20.458501] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-6050-2.ucode [ 20.460118] iwlagn 0000:03:00.0: iwlwifi-6050-2.ucode firmware file req failed: -2 [ 20.460183] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-6050-1.ucode [ 20.461810] iwlagn 0000:03:00.0: iwlwifi-6050-1.ucode firmware file req failed: -2 [ 20.461858] iwlagn 0000:03:00.0: Could not read microcode: -2 [ 20.522682] rtl8187: RF Chip ID: 05 [ 20.546775] rtl8187: Card reports RF frontend Realtek 8225 [ 20.546779] rtl8187: WW:This driver has EXPERIMENTAL support for this chipset. [ 20.546782] rtl8187: WW:use it with care and at your own risk and [ 20.546784] rtl8187: WW:**PLEASE** REPORT SUCCESS/INSUCCESS TO andreamrl@tiscali.it [ 20.594218] rtl8187: This seems a new V2 radio [ 20.594491] rtl8187: PAPE from CONFIG2: 0 [ 20.594510] rtl8187: Driver probe completed [ 20.594511] [ 20.594567] usbcore: registered new interface driver rtl8187 [ 20.686368] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load [ 20.702996] Bluetooth: L2CAP ver 2.14 [ 20.702998] Bluetooth: L2CAP socket layer initialized [ 20.707814] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.707817] Bluetooth: BNEP filters: protocol multicast [ 20.713809] Bridge firewalling registered [ 20.717851] Bluetooth: SCO (Voice Link) ver 0.6 [ 20.717853] Bluetooth: SCO socket layer initialized [ 20.781627] Bluetooth: RFCOMM TTY layer initialized [ 20.781642] Bluetooth: RFCOMM socket layer initialized [ 20.781646] Bluetooth: RFCOMM ver 1.11 [ 20.920260] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000 [ 20.920265] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 20.942270] CPU0 attaching NULL sched-domain. [ 20.942274] CPU1 attaching NULL sched-domain. [ 20.942276] CPU2 attaching NULL sched-domain. [ 20.942277] CPU3 attaching NULL sched-domain. [ 20.969305] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 21.499071] CPU0 attaching sched-domain: [ 21.499074] domain 0: span 0-1 level SIBLING [ 21.499076] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 21.499079] domain 1: span 0-3 level MC [ 21.499080] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 21.499085] CPU1 attaching sched-domain: [ 21.499086] domain 0: span 0-1 level SIBLING [ 21.499087] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 21.499090] domain 1: span 0-3 level MC [ 21.499091] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 21.499094] CPU2 attaching sched-domain: [ 21.499095] domain 0: span 2-3 level SIBLING [ 21.499096] groups: 2 (cpu_power = 589) 3 (cpu_power = 589) [ 21.499099] domain 1: span 0-3 level MC [ 21.499100] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 21.499103] CPU3 attaching sched-domain: [ 21.499104] domain 0: span 2-3 level SIBLING [ 21.499105] groups: 3 (cpu_power = 589) 2 (cpu_power = 589) [ 21.499108] domain 1: span 0-3 level MC [ 21.499109] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 23.179623] alg: No test for __aes-aesni (__driver-aes-aesni) [ 23.179653] alg: No test for __ecb-aes-aesni (__driver-ecb-aes-aesni) [ 23.179676] alg: No test for __cbc-aes-aesni (__driver-cbc-aes-aesni) [ 23.181353] alg: No test for __ecb-aes-aesni (cryptd(__driver-ecb-aes-aesni)) [ 23.182189] padlock: VIA PadLock not detected. [ 23.184980] alg: No test for __cbc-aes-aesni (cryptd(__driver-cbc-aes-aesni)) [ 23.187885] padlock: VIA PadLock Hash Engine not detected. [ 23.481060] Adding 2034680k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:2034680k [ 25.765675] CPU0 attaching NULL sched-domain. [ 25.765682] CPU1 attaching NULL sched-domain. [ 25.765687] CPU2 attaching NULL sched-domain. [ 25.765689] CPU3 attaching NULL sched-domain. [ 25.840174] CPU0 attaching sched-domain: [ 25.840178] domain 0: span 0-1 level SIBLING [ 25.840180] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 25.840184] domain 1: span 0-3 level MC [ 25.840186] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 25.840191] CPU1 attaching sched-domain: [ 25.840193] domain 0: span 0-1 level SIBLING [ 25.840194] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 25.840197] domain 1: span 0-3 level MC [ 25.840199] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 25.840203] CPU2 attaching sched-domain: [ 25.840204] domain 0: span 2-3 level SIBLING [ 25.840206] groups: 2 (cpu_power = 589) 3 (cpu_power = 589) [ 25.840209] domain 1: span 0-3 level MC [ 25.840210] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 25.840214] CPU3 attaching sched-domain: [ 25.840216] domain 0: span 2-3 level SIBLING [ 25.840217] groups: 3 (cpu_power = 589) 2 (cpu_power = 589) [ 25.840220] domain 1: span 0-3 level MC [ 25.840222] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 27.283833] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 27.529002] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9 [ 65.044515] CPU0 attaching NULL sched-domain. [ 65.044525] CPU1 attaching NULL sched-domain. [ 65.044531] CPU2 attaching NULL sched-domain. [ 65.044540] CPU3 attaching NULL sched-domain. [ 65.080787] thinkpad_acpi: EC reports that Thermal Table has changed [ 65.120996] CPU0 attaching sched-domain: [ 65.121001] domain 0: span 0-1 level SIBLING [ 65.121004] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 65.121011] domain 1: span 0-3 level MC [ 65.121014] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 65.121023] CPU1 attaching sched-domain: [ 65.121025] domain 0: span 0-1 level SIBLING [ 65.121028] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 65.121034] domain 1: span 0-3 level MC [ 65.121037] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 65.121043] CPU2 attaching sched-domain: [ 65.121046] domain 0: span 2-3 level SIBLING [ 65.121048] groups: 2 (cpu_power = 589) 3 (cpu_power = 589) [ 65.121054] domain 1: span 0-3 level MC [ 65.121057] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 65.121063] CPU3 attaching sched-domain: [ 65.121066] domain 0: span 2-3 level SIBLING [ 65.121068] groups: 3 (cpu_power = 589) 2 (cpu_power = 589) [ 65.121074] domain 1: span 0-3 level MC [ 65.121077] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 152.208813] usb 2-1.1: USB disconnect, address 3 [ 152.208901] unregister_netdevice: device wlan0/ffff880068e00000 never was registered [ 152.208904] ------------[ cut here ]------------ [ 152.208915] WARNING: at /build/buildd/linux-2.6.32/net/core/dev.c:4650 rollback_registered+0xff/0x130() [ 152.208919] Hardware name: 2516CTO [ 152.208921] Modules linked in: sha256_generic aesni_intel cryptd aes_x86_64 aes_generic dm_crypt joydev rfcomm sco bridge stp bnep l2cap arc4 snd_hda_intel thinkpad_acpi iwlagn iwlcore snd_hda_codec snd_hwdep sdhci_pci psmouse snd_pcm snd_timer nvram r8187 ieee80211_rtl ieee80211_crypt_rtl uvcvideo videodev btusb v4l1_compat v4l2_compat_ioctl32 bluetooth mac80211 snd serio_raw nvidia(P) sdhci led_class cfg80211 soundcore snd_page_alloc vga16fb vgastate lp parport fbcon tileblit font bitblit softcursor uvesafb ohci1394 video e1000e output ieee1394 ahci intel_agp [ 152.208977] Pid: 44, comm: khubd Tainted: P 2.6.32-22-generic #33-Ubuntu [ 152.208980] Call Trace: [ 152.208989] [] warn_slowpath_common+0x7b/0xc0 [ 152.208995] [] warn_slowpath_null+0x14/0x20 [ 152.209000] [] rollback_registered+0xff/0x130 [ 152.209004] [] unregister_netdevice+0x22/0x80 [ 152.209008] [] unregister_netdev+0x1e/0x30 [ 152.209016] [] rtl8187_usb_disconnect+0x2b/0x8d [r8187] [ 152.209022] [] usb_unbind_interface+0x124/0x170 [ 152.209029] [] __device_release_driver+0x6f/0xe0 [ 152.209033] [] device_release_driver+0x2d/0x40 [ 152.209039] [] bus_remove_device+0x9a/0xc0 [ 152.209044] [] device_del+0x127/0x1d0 [ 152.209048] [] usb_disable_device+0xa8/0x130 [ 152.209054] [] usb_disconnect+0xd2/0x170 [ 152.209059] [] hub_port_connect_change+0x8f/0x980 [ 152.209064] [] hub_events+0x3b2/0x5a0 [ 152.209070] [] ? thread_return+0x48/0x420 [ 152.209074] [] hub_thread+0x55/0x190 [ 152.209080] [] ? autoremove_wake_function+0x0/0x40 [ 152.209085] [] ? hub_thread+0x0/0x190 [ 152.209089] [] kthread+0x96/0xa0 [ 152.209094] [] child_rip+0xa/0x20 [ 152.209098] [] ? kthread+0x0/0xa0 [ 152.209102] [] ? child_rip+0x0/0x20 [ 152.209105] ---[ end trace 02f396ed132b4343 ]--- [ 152.209108] network todo 'wlan0' but state 0 [ 152.209112] Pid: 44, comm: khubd Tainted: P W 2.6.32-22-generic #33-Ubuntu [ 152.209114] Call Trace: [ 152.209118] [] netdev_run_todo+0x13d/0x180 [ 152.209124] [] rtnl_unlock+0xe/0x10 [ 152.209128] [] unregister_netdev+0x23/0x30 [ 152.209134] [] rtl8187_usb_disconnect+0x2b/0x8d [r8187] [ 152.209139] [] usb_unbind_interface+0x124/0x170 [ 152.209144] [] __device_release_driver+0x6f/0xe0 [ 152.209148] [] device_release_driver+0x2d/0x40 [ 152.209152] [] bus_remove_device+0x9a/0xc0 [ 152.209156] [] device_del+0x127/0x1d0 [ 152.209160] [] usb_disable_device+0xa8/0x130 [ 152.209165] [] usb_disconnect+0xd2/0x170 [ 152.209169] [] hub_port_connect_change+0x8f/0x980 [ 152.209174] [] hub_events+0x3b2/0x5a0 [ 152.209178] [] ? thread_return+0x48/0x420 [ 152.209182] [] hub_thread+0x55/0x190 [ 152.209187] [] ? autoremove_wake_function+0x0/0x40 [ 152.209191] [] ? hub_thread+0x0/0x190 [ 152.209195] [] kthread+0x96/0xa0 [ 152.209199] [] child_rip+0xa/0x20 [ 152.209203] [] ? kthread+0x0/0xa0 [ 152.209206] [] ? child_rip+0x0/0x20 [ 152.811996] rtl8187: WW:Card reset timeout! [ 153.021861] rtl8187: wlan driver removed [ 153.021864] [ 155.252279] usb 2-1.1: new high speed USB device using ehci_hcd and address 5 [ 155.369119] usb 2-1.1: configuration #1 chosen from 1 choice [ 155.370717] rtl8187: Enabling 14 channels. [ 155.371170] rtl8187: MAC chip version: 04 [ 155.371174] rtl8187: Card type: AD [ 155.371418] rtl8187: Reported EEPROM chip is a 93c46 (1Kbit) [ 155.587660] rtl8187: Card MAC address is 00:c0:ca:39:e2:fb [ 155.884781] rtl8187: RF Chip ID: 05 [ 155.921215] rtl8187: Card reports RF frontend Realtek 8225 [ 155.921219] rtl8187: WW:This driver has EXPERIMENTAL support for this chipset. [ 155.921222] rtl8187: WW:use it with care and at your own risk and [ 155.921224] rtl8187: WW:**PLEASE** REPORT SUCCESS/INSUCCESS TO andreamrl@tiscali.it [ 155.982138] rtl8187: This seems a new V2 radio [ 155.982404] rtl8187: PAPE from CONFIG2: 0 [ 155.983811] rtl8187: Driver probe completed [ 155.983815] [ 155.992177] udev: renamed network interface wlan1 to wlan2 [ 156.597235] rtl8187: Card successfully reset [ 156.808562] rtl8187: RR:84 BRSR: 61ff [ 160.836671] ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 160.883504] rtl8187: Setting SW wep key [ 160.883536] rtl8187: Setting SW wep key [ 160.883556] rtl8187: Setting SW wep key [ 160.883573] rtl8187: Setting SW wep key [ 160.888771] GOT WX GET SCAN WX_SEM LOCKGOT WX GET SCAN WX_SEM LOCKGOT WX GET SCAN WX_SEM LOCKGOT WX GET SCAN WX_SEM LOCKGOT WX GET SCAN WX_SEM LOCKGOT WX GET SCAN WX_SEM LOCKGOT WX GET SCAN WX_SEM LOCK [ 246.303960] rtl8187: Setting SW wep key [ 246.305418] ieee80211_crypt: registered algorithm 'WEP' [ 246.305572] rtl8187: Setting SW wep key [ 246.305675] rtl8187: Setting SW wep key [ 246.424525] Linking with "salamander" rate: 11 MBit [ 246.600847] Linking with "salamander" rate: 11 MBit [ 246.667195] Associated successfully [ 246.667200] Using 11 MBit [ 246.727391] ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready [ 256.982823] wlan2: no IPv6 routers present [ 258.140803] GOT WX GET SCAN WX_SEM LOCKGOT WX GET SCAN WX_SEM LOCKGOT WX GET SCAN WX_SEM LOCK [ 417.688924] usb 1-1.1: new high speed USB device using ehci_hcd and address 5 [ 417.804993] usb 1-1.1: configuration #1 chosen from 2 choices [ 417.872115] Initializing USB Mass Storage driver... [ 417.872346] scsi6 : SCSI emulation for USB Mass Storage devices [ 417.872617] usb-storage: device found at 5 [ 417.872622] usb-storage: waiting for device to settle before scanning [ 417.872645] usbcore: registered new interface driver usb-storage [ 417.872650] USB Mass Storage support registered. [ 422.862726] usb-storage: device scan complete [ 422.863684] scsi 6:0:0:0: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 [ 422.864303] scsi 6:0:0:1: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 [ 422.866109] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 422.867643] sd 6:0:0:1: Attached scsi generic sg3 type 0 [ 422.868638] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 422.873851] sd 6:0:0:1: [sdc] Attached SCSI removable disk [ 425.038625] sd 6:0:0:0: [sdb] 56631296 512-byte logical blocks: (28.9 GB/27.0 GiB) [ 425.039110] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 425.040823] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 425.040829] sdb: [ 438.641299] GOT WX GET SCAN WX_SEM LOCK [ 456.664840] sdb: detected capacity change from 28995223552 to 0 [ 460.130936] usb 1-1.1: USB disconnect, address 5 [ 538.587068] GOT WX GET SCAN WX_SEM LOCKGOT WX GET SCAN WX_SEM LOCKGOT WX GET SCAN WX_SEM LOCKGOT WX GET SCAN WX_SEM LOCKGOT WX GET SCAN WX_SEM LOCK [ 1054.504842] CPU0 attaching NULL sched-domain. [ 1054.504846] CPU1 attaching NULL sched-domain. [ 1054.504848] CPU2 attaching NULL sched-domain. [ 1054.504850] CPU3 attaching NULL sched-domain. [ 1054.585454] CPU0 attaching sched-domain: [ 1054.585460] domain 0: span 0-1 level SIBLING [ 1054.585463] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 1054.585470] domain 1: span 0-3 level MC [ 1054.585473] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 1054.585482] CPU1 attaching sched-domain: [ 1054.585484] domain 0: span 0-1 level SIBLING [ 1054.585487] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 1054.585493] domain 1: span 0-3 level MC [ 1054.585495] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 1054.585502] CPU2 attaching sched-domain: [ 1054.585505] domain 0: span 2-3 level SIBLING [ 1054.585507] groups: 2 (cpu_power = 589) 3 (cpu_power = 589) [ 1054.585513] domain 1: span 0-3 level MC [ 1054.585516] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 1054.585522] CPU3 attaching sched-domain: [ 1054.585525] domain 0: span 2-3 level SIBLING [ 1054.585527] groups: 3 (cpu_power = 589) 2 (cpu_power = 589) [ 1054.585533] domain 1: span 0-3 level MC [ 1054.585536] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 1055.583977] usb 1-1.4: USB disconnect, address 3 [ 1055.584002] btusb_intr_complete: hci0 urb ffff880075a0c900 failed to resubmit (19) [ 1055.584070] btusb_bulk_complete: hci0 urb ffff880075a0c6c0 failed to resubmit (19) [ 1055.584078] btusb_bulk_complete: hci0 urb ffff880075a0ccc0 failed to resubmit (19) [ 1055.584206] btusb_send_frame: hci0 urb ffff8800657c09c0 submission failed [ 1055.831874] Linking with "salamander" rate: 11 MBit [ 1055.835805] hub 1-1:1.0: hub_port_status failed (err = -32) [ 1055.835813] hub 1-1:1.0: connect-debounce failed, port 4 disabled [ 1056.053840] rtl8187: Setting SW wep key [ 1056.053938] rtl8187: Setting SW wep key [ 1056.053972] rtl8187: Setting SW wep key [ 1056.054307] rtl8187: Setting SW wep key [ 1056.054338] rtl8187: Setting SW wep key [ 1056.125802] rtl8187: RX process aborted due to explicit shutdown [ 1060.787004] PM: Syncing filesystems ... done. [ 1060.856524] PM: Preparing system for mem sleep [ 1060.856529] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 1060.857101] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 1060.857172] PM: Entering mem sleep [ 1060.857187] Suspending console(s) (use no_console_suspend to debug) [ 1061.633746] rtl8187: Card successfully reset [ 1061.848572] rtl8187: wlan driver removed [ 1061.848574] [ 1061.862639] PM: suspend of drv:usb dev:2-1.1 complete after 1007.006 msecs [ 1062.088053] PM: suspend of drv:psmouse dev:serio2 complete after 225.795 msecs [ 1062.202000] PM: suspend of drv:ieee80211 dev:phy0 complete after 114.126 msecs [ 1062.241910] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1062.242155] sd 0:0:0:0: [sda] Stopping disk [ 1062.818127] PM: suspend of drv:sd dev:0:0:0:0 complete after 577.234 msecs [ 1063.236642] PM: suspend of drv:psmouse dev:serio1 complete after 386.428 msecs [ 1063.829150] PM: suspend of drv:atkbd dev:serio0 complete after 593.545 msecs [ 1063.834884] ACPI handle has no context! [ 1063.850226] ACPI handle has no context! [ 1063.850235] sdhci-pci 0000:0d:00.0: PCI INT A disabled [ 1063.850246] ACPI handle has no context! [ 1064.408139] HDA Intel 0000:01:00.1: PCI INT A disabled [ 1064.408235] ACPI handle has no context! [ 1064.428079] PM: suspend of drv:HDA Intel dev:0000:01:00.1 complete after 539.979 msecs [ 1064.597792] ehci_hcd 0000:00:1d.0: PCI INT D disabled [ 1065.715726] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x01bf0c00 [ 1065.825773] HDA Intel 0000:00:1b.0: PCI INT B disabled [ 1065.845555] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 1249.945 msecs [ 1065.845568] ehci_hcd 0000:00:1a.0: PCI INT D disabled [ 1066.286570] e1000e 0000:00:19.0: PCI INT A disabled [ 1066.286576] e1000e 0000:00:19.0: PME# enabled [ 1066.286583] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [ 1066.304787] PM: suspend of drv:e1000e dev:0000:00:19.0 complete after 460.022 msecs [ 1066.304867] PM: suspend of devices complete after 5457.067 msecs [ 1066.304871] PM: suspend devices took 5.460 seconds [ 1066.394565] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [ 1066.474447] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [ 1066.474543] PM: late suspend of devices complete after 169.967 msecs [ 1066.574270] ACPI: Preparing to enter system sleep state S3 [ 1067.023425] Disabling non-boot CPUs ... [ 1067.023449] CPU0 attaching NULL sched-domain. [ 1067.023452] CPU1 attaching NULL sched-domain. [ 1067.023454] CPU2 attaching NULL sched-domain. [ 1067.023456] CPU3 attaching NULL sched-domain. [ 1067.183149] CPU0 attaching NULL sched-domain. [ 1067.184347] Broke affinity for irq 25 [ 1067.185536] CPU 1 is now offline [ 1067.187251] Broke affinity for irq 26 [ 1067.188465] CPU 2 is now offline [ 1067.190114] Broke affinity for irq 9 [ 1067.190125] Broke affinity for irq 16 [ 1067.190135] Broke affinity for irq 19 [ 1067.190145] Broke affinity for irq 23 [ 1067.190152] Broke affinity for irq 27 [ 1067.292951] CPU 3 is now offline [ 1067.292954] SMP alternatives: switching to UP code [ 1067.297391] Extended CMOS year: 2000 [18446744051.193654] Back to C! [18446744051.193922] CPU0: Thermal monitoring enabled (TM1) [18446744051.193986] Extended CMOS year: 2000 [18446744051.194021] Enabling non-boot CPUs ... [18446744051.194239] SMP alternatives: switching to SMP code [18446744051.198173] Booting processor 1 APIC 0x1 ip 0x6000 [18446744051.208402] Initializing CPU#1 [18446744051.349271] CPU: Physical Processor ID: 0 [18446744051.349272] CPU: Processor Core ID: 0 [18446744051.349275] CPU: L1 I cache: 32K, L1 D cache: 32K [18446744051.349277] CPU: L2 cache: 256K [18446744051.349278] CPU: L3 cache: 3072K [18446744051.349281] CPU 1/0x1 -> Node 0 [18446744051.349293] CPU1: Thermal monitoring enabled (TM1) [18446744051.349297] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 [18446744051.349399] CPU1: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz stepping 02 [18446744051.349406] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [18446744051.369437] CPU0 attaching NULL sched-domain. [18446744051.439120] CPU0 attaching sched-domain: [18446744051.439123] domain 0: span 0-1 level SIBLING [18446744051.439126] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [18446744051.439131] domain 1: span 0-1 level MC [18446744051.439133] groups: 0-1 (cpu_power = 1178) [18446744051.439137] CPU1 attaching sched-domain: [18446744051.439139] domain 0: span 0-1 level SIBLING [18446744051.439141] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [18446744051.439145] domain 1: span 0-1 level MC [18446744051.439147] groups: 0-1 (cpu_power = 1178) [18446744051.439886] hpet: hpet3 irq 25 for MSI [18446744051.439891] CPU1 is up [18446744051.440093] Booting processor 2 APIC 0x4 ip 0x6000 [18446744051.450307] Initializing CPU#2 [18446744051.598830] CPU: Physical Processor ID: 0 [18446744051.598831] CPU: Processor Core ID: 2 [18446744051.598834] CPU: L1 I cache: 32K, L1 D cache: 32K [18446744051.598835] CPU: L2 cache: 256K [18446744051.598836] CPU: L3 cache: 3072K [18446744051.598838] CPU 2/0x4 -> Node 0 [18446744051.598850] CPU2: Thermal monitoring enabled (TM1) [18446744051.598853] CPU 2 MCA banks SHD:6 [18446744051.598933] CPU2: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz stepping 02 [18446744051.598941] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [18446744051.618991] CPU0 attaching NULL sched-domain. [18446744051.618995] CPU1 attaching NULL sched-domain. [18446744051.748576] CPU0 attaching sched-domain: [18446744051.748579] domain 0: span 0-1 level SIBLING [18446744051.748581] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [18446744051.748586] domain 1: span 0-2 level MC [18446744051.748589] groups: 0-1 (cpu_power = 1178) 2 [18446744051.748593] CPU1 attaching sched-domain: [18446744051.748595] domain 0: span 0-1 level SIBLING [18446744051.748597] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [18446744051.748601] domain 1: span 0-2 level MC [18446744051.748603] groups: 0-1 (cpu_power = 1178) 2 [18446744051.748608] CPU2 attaching sched-domain: [18446744051.748610] domain 0: span 0-2 level MC [18446744051.748612] groups: 2 0-1 (cpu_power = 1178) [18446744051.749391] hpet: hpet4 irq 26 for MSI [18446744051.749398] CPU2 is up [18446744051.749641] Booting processor 3 APIC 0x5 ip 0x6000 [18446744051.759658] Initializing CPU#3 [18446744051.908286] CPU: Physical Processor ID: 0 [18446744051.908287] CPU: Processor Core ID: 2 [18446744051.908290] CPU: L1 I cache: 32K, L1 D cache: 32K [18446744051.908292] CPU: L2 cache: 256K [18446744051.908294] CPU: L3 cache: 3072K [18446744051.908297] CPU 3/0x5 -> Node 0 [18446744051.908309] CPU3: Thermal monitoring enabled (TM1) [18446744051.908313] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 [18446744051.908359] CPU3: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz stepping 02 [18446744051.908367] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [18446744051.928413] CPU0 attaching NULL sched-domain. [18446744051.928416] CPU1 attaching NULL sched-domain. [18446744051.928419] CPU2 attaching NULL sched-domain. [18446744052.048050] CPU0 attaching sched-domain: [18446744052.048053] domain 0: span 0-1 level SIBLING [18446744052.048056] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [18446744052.048060] domain 1: span 0-3 level MC [18446744052.048063] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [18446744052.048068] CPU1 attaching sched-domain: [18446744052.048070] domain 0: span 0-1 level SIBLING [18446744052.048072] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [18446744052.048076] domain 1: span 0-3 level MC [18446744052.048078] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [18446744052.048084] CPU2 attaching sched-domain: [18446744052.048085] domain 0: span 2-3 level SIBLING [18446744052.048088] groups: 2 (cpu_power = 589) 3 (cpu_power = 589) [18446744052.048092] domain 1: span 0-3 level MC [18446744052.048094] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [18446744052.048099] CPU3 attaching sched-domain: [18446744052.048101] domain 0: span 2-3 level SIBLING [18446744052.048103] groups: 3 (cpu_power = 589) 2 (cpu_power = 589) [18446744052.048107] domain 1: span 0-3 level MC [18446744052.048109] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [18446744052.049070] hpet: hpet5 irq 27 for MSI [18446744052.049077] CPU3 is up [18446744052.050468] ACPI: Waking up from system sleep state S3 [18446744052.796909] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [18446744052.797026] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x400, writing 0x40b) [18446744052.797047] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf2428000) [18446744052.797055] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102) [18446744052.797160] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [18446744052.797223] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0) [18446744052.797237] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [18446744052.797306] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [18446744052.797356] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x4010b) [18446744052.797369] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [18446744052.797375] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xf210f210) [18446744052.797381] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) [18446744052.797392] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [18446744052.797399] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [18446744052.797448] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x400, writing 0x40b) [18446744052.797468] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf2428400) [18446744052.797477] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102) [18446744052.797597] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [18446744052.797667] pci 0000:00:1f.6: restoring config space at offset 0xf (was 0x400, writing 0x40b) [18446744052.797691] pci 0000:00:1f.6: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [18446744052.797741] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x800010, writing 0x800000) [18446744052.797748] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100007) [18446744052.797814] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [18446744052.798228] PM: early resume of devices complete after 1.409 msecs [18446744052.843160] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [18446744052.843165] e1000e 0000:00:19.0: setting latency timer to 64 [18446744052.843172] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [18446744052.843176] e1000e 0000:00:19.0: PME# disabled [18446744052.843215] e1000e 0000:00:19.0: irq 34 for MSI/MSI-X [18446744053.126360] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 283.717 msecs [18446744053.126379] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [18446744053.126386] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [18446744053.126480] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [18446744053.126492] HDA Intel 0000:00:1b.0: setting latency timer to 64 [18446744053.126517] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [18446744053.126526] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [18446744053.126581] pci 0000:00:1e.0: setting latency timer to 64 [18446744053.126626] ahci 0000:00:1f.2: setting latency timer to 64 [18446744053.671696] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 545.902 msecs [18446744053.672523] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [18446744053.672531] HDA Intel 0000:01:00.1: setting latency timer to 64 [18446744053.672618] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [18446744053.672620] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [18446744053.672626] sdhci-pci 0000:0d:00.0: setting latency timer to 64 [18446744053.732299] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[f2100800-f2100fff] Max Packet=[2048] IR/IT contexts=[4/4] [18446744053.934806] PM: resume of drv:usb dev:1-1 complete after 108.924 msecs [18446744053.964762] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [18446744053.964794] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [18446744053.966337] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [18446744053.966344] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [18446744053.966508] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [18446744053.966515] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [18446744053.970601] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [18446744053.971517] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [18446744053.982131] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [18446744053.982134] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [18446744053.982295] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [18446744053.982302] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [18446744053.982950] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [18446744053.983637] ata1.00: configured for UDMA/133 [18446744053.983819] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [18446744053.988896] ata2.00: configured for UDMA/133 [18446744053.994682] ata5: SATA link down (SStatus 0 SControl 300) [18446744053.997910] ata1.00: configured for UDMA/133 [18446744053.997915] ata1: EH complete [18446744054.014645] ata6: SATA link down (SStatus 0 SControl 300) [18446744054.044577] PM: resume of drv:usb dev:2-1 complete after 109.955 msecs [18446744054.044585] sd 0:0:0:0: [sda] Starting disk [18446744054.144536] usb 1-1.6: reset high speed USB device using ehci_hcd and address 4 [18446744054.259085] PM: resume of drv:usb dev:1-1.6 complete after 205.963 msecs [18446744054.334271] usb 2-1.3: reset high speed USB device using ehci_hcd and address 4 [18446744054.444846] PM: resume of drv:usb dev:2-1.3 complete after 186.077 msecs [18446744054.447797] PM: resume of devices complete after 1652.440 msecs [18446744054.447930] PM: resume devices took 1.650 seconds [18446744054.447954] PM: Finishing wakeup. [18446744054.447955] Restarting tasks ... [18446744054.458560] usb 2-1.1: USB disconnect, address 5 [18446744054.480542] done. [18446744055.074363] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-6050-4.ucode [18446744055.084607] iwlagn 0000:03:00.0: iwlwifi-6050-4.ucode firmware file req failed: -2 [18446744055.084611] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-6050-3.ucode [18446744055.085961] iwlagn 0000:03:00.0: iwlwifi-6050-3.ucode firmware file req failed: -2 [18446744055.085969] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-6050-2.ucode [18446744055.094890] iwlagn 0000:03:00.0: iwlwifi-6050-2.ucode firmware file req failed: -2 [18446744055.094894] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-6050-1.ucode [18446744055.104798] iwlagn 0000:03:00.0: iwlwifi-6050-1.ucode firmware file req failed: -2 [18446744055.104801] iwlagn 0000:03:00.0: Could not read microcode: -2 [18446744055.105972] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-6050-4.ucode [18446744055.110313] iwlagn 0000:03:00.0: iwlwifi-6050-4.ucode firmware file req failed: -2 [18446744055.110318] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-6050-3.ucode [18446744055.117742] iwlagn 0000:03:00.0: iwlwifi-6050-3.ucode firmware file req failed: -2 [18446744055.117748] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-6050-2.ucode [18446744055.121645] iwlagn 0000:03:00.0: iwlwifi-6050-2.ucode firmware file req failed: -2 [18446744055.121650] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-6050-1.ucode [18446744055.135490] iwlagn 0000:03:00.0: iwlwifi-6050-1.ucode firmware file req failed: -2 [18446744055.135495] iwlagn 0000:03:00.0: Could not read microcode: -2 [18446744055.522052] usb 1-1.4: new full speed USB device using ehci_hcd and address 6 [18446744055.636195] usb 1-1.4: configuration #1 chosen from 1 choice [18446744056.033035] CPU0 attaching NULL sched-domain. [18446744056.033040] CPU1 attaching NULL sched-domain. [18446744056.033042] CPU2 attaching NULL sched-domain. [18446744056.033044] CPU3 attaching NULL sched-domain. [18446744056.093554] CPU0 attaching sched-domain: [18446744056.093560] domain 0: span 0-1 level SIBLING [18446744056.093563] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [18446744056.093570] domain 1: span 0-3 level MC [18446744056.093573] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [18446744056.093583] CPU1 attaching sched-domain: [18446744056.093585] domain 0: span 0-1 level SIBLING [18446744056.093588] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [18446744056.093594] domain 1: span 0-3 level MC [18446744056.093597] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [18446744056.093604] CPU2 attaching sched-domain: [18446744056.093606] domain 0: span 2-3 level SIBLING [18446744056.093609] groups: 2 (cpu_power = 589) 3 (cpu_power = 589) [18446744056.093615] domain 1: span 0-3 level MC [18446744056.093618] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [18446744056.093625] CPU3 attaching sched-domain: [18446744056.093627] domain 0: span 2-3 level SIBLING [18446744056.093630] groups: 3 (cpu_power = 589) 2 (cpu_power = 589) [18446744056.093636] domain 1: span 0-3 level MC [18446744056.093638] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)