[ 0.000000] Linux version 5.4.0-67-generic (buildd@lcy01-amd64-025) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #75-Ubuntu SMP Fri Feb 19 18:03:38 UTC 2021 (Ubuntu 5.4.0-67.75-generic 5.4.94) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-67-generic root=UUID=7bbc36d4-b65d-4291-a3b9-dc840a88f20a ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000008bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008c000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aea6efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000aea6f000-0x00000000aec70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000aec71000-0x00000000ba300fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ba301000-0x00000000bcc0efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bcc0f000-0x00000000bce7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bce7f000-0x00000000bcefefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bceff000-0x00000000bcefffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bcf00000-0x00000000bf9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000033e5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xb0012018-0xb0022057] usable ==> usable [ 0.000000] e820: update [mem 0xb0012018-0xb0022057] usable ==> usable [ 0.000000] e820: update [mem 0xb0001018-0xb0011657] usable ==> usable [ 0.000000] e820: update [mem 0xb0001018-0xb0011657] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000008bfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000008c000-0x00000000000bffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000aea6efff] usable [ 0.000000] reserve setup_data: [mem 0x00000000aea6f000-0x00000000aec70fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000aec71000-0x00000000b0001017] usable [ 0.000000] reserve setup_data: [mem 0x00000000b0001018-0x00000000b0011657] usable [ 0.000000] reserve setup_data: [mem 0x00000000b0011658-0x00000000b0012017] usable [ 0.000000] reserve setup_data: [mem 0x00000000b0012018-0x00000000b0022057] usable [ 0.000000] reserve setup_data: [mem 0x00000000b0022058-0x00000000ba300fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000ba301000-0x00000000bcc0efff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000bcc0f000-0x00000000bce7efff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000bce7f000-0x00000000bcefefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000bceff000-0x00000000bcefffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000bcf00000-0x00000000bf9fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000033e5fffff] usable [ 0.000000] efi: EFI v2.31 by Lenovo [ 0.000000] efi: ACPI=0xbcefe000 ACPI 2.0=0xbcefe014 SMBIOS=0xbcc0e000 ESRT=0xba6d0000 [ 0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries: [ 0.000000] efi: mem46: [Reserved | | | | | | | | | | | | ] range=[0x0000000000000000-0x0000000000000000] (invalid) [ 0.000000] efi: mem47: [Reserved | | | | | | | | | | | | ] range=[0x0000000000000000-0x0000000000000000] (invalid) [ 0.000000] efi: mem48: [Reserved | | | | | | | | | | | | ] range=[0x0000000000000000-0x0000000000000000] (invalid) [ 0.000000] efi: mem49: [Reserved | | | | | | | | | | | | ] range=[0x0000000000000000-0x0000000000000000] (invalid) [ 0.000000] efi: mem50: [Reserved | | | | | | | | | | | | ] range=[0x0000000000000000-0x0000000000000000] (invalid) [ 0.000000] efi: mem51: [Reserved | | | | | | | | | | | | ] range=[0x0000000000000000-0x0000000000000000] (invalid) [ 0.000000] efi: mem52: [Reserved | | | | | | | | | | | | ] range=[0x0000000000000000-0x0000000000000000] (invalid) [ 0.000000] efi: Removing 7 invalid memory map entries. [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 20AWS0DS0T/20AWS0DS0T, BIOS GLETA1WW (2.55 ) 04/20/2020 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2594.221 MHz processor [ 0.001786] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001788] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001794] last_pfn = 0x33e600 max_arch_pfn = 0x400000000 [ 0.001798] MTRR default type: write-back [ 0.001799] MTRR fixed ranges enabled: [ 0.001800] 00000-9FFFF write-back [ 0.001801] A0000-BFFFF uncachable [ 0.001802] C0000-FFFFF write-protect [ 0.001802] MTRR variable ranges enabled: [ 0.001804] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.001805] 1 base 00BE000000 mask 7FFE000000 uncachable [ 0.001805] 2 base 00BD000000 mask 7FFF000000 uncachable [ 0.001806] 3 base 00BCF00000 mask 7FFFF00000 uncachable [ 0.001807] 4 disabled [ 0.001807] 5 disabled [ 0.001807] 6 disabled [ 0.001808] 7 disabled [ 0.001808] 8 disabled [ 0.001809] 9 disabled [ 0.002121] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002251] last_pfn = 0xbcf00 max_arch_pfn = 0x400000000 [ 0.010132] esrt: Reserving ESRT space from 0x00000000ba6d0000 to 0x00000000ba6d0060. [ 0.010138] check: Scanning 1 areas for low memory corruption [ 0.010142] Using GB pages for direct mapping [ 0.010710] secureboot: Secure boot disabled [ 0.010712] RAMDISK: [mem 0x3ad28000-0x3fffdfff] [ 0.010718] ACPI: Early table checksum verification disabled [ 0.010721] ACPI: RSDP 0x00000000BCEFE014 000024 (v02 LENOVO) [ 0.010724] ACPI: XSDT 0x00000000BCEFE170 0000DC (v01 LENOVO TP-GL 00002550 PTEC 00000002) [ 0.010729] ACPI: FACP 0x00000000BCEF8000 00010C (v05 LENOVO TP-GL 00002550 PTEC 00000002) [ 0.010734] ACPI: DSDT 0x00000000BCEE1000 0119A7 (v01 LENOVO TP-GL 00002550 INTL 20120711) [ 0.010737] ACPI: FACS 0x00000000BCD7A000 000040 [ 0.010739] ACPI: SLIC 0x00000000BCEFD000 000176 (v01 LENOVO TP-GL 00002550 PTEC 00000001) [ 0.010742] ACPI: DBGP 0x00000000BCEFB000 000034 (v01 LENOVO TP-GL 00002550 PTEC 00000002) [ 0.010744] ACPI: ECDT 0x00000000BCEFA000 000052 (v01 LENOVO TP-GL 00002550 PTEC 00000002) [ 0.010746] ACPI: HPET 0x00000000BCEF7000 000038 (v01 LENOVO TP-GL 00002550 PTEC 00000002) [ 0.010749] ACPI: APIC 0x00000000BCEF6000 000098 (v01 LENOVO TP-GL 00002550 PTEC 00000002) [ 0.010751] ACPI: MCFG 0x00000000BCEF5000 00003C (v01 LENOVO TP-GL 00002550 PTEC 00000002) [ 0.010754] ACPI: SSDT 0x00000000BCEF4000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711) [ 0.010756] ACPI: SSDT 0x00000000BCEF3000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711) [ 0.010759] ACPI: SSDT 0x00000000BCEE0000 000B75 (v01 LENOVO SataAhci 00001000 INTL 20120711) [ 0.010761] ACPI: SSDT 0x00000000BCEDF000 00076F (v01 LENOVO Cpu0Ist 00003000 INTL 20120711) [ 0.010764] ACPI: SSDT 0x00000000BCEDE000 000AD8 (v01 LENOVO CpuPm 00003000 INTL 20120711) [ 0.010766] ACPI: SSDT 0x00000000BCEDC000 00125C (v01 LENOVO SaSsdt 00003000 INTL 20120711) [ 0.010769] ACPI: SSDT 0x00000000BCEDB000 000379 (v01 LENOVO CppcTabl 00001000 INTL 20120711) [ 0.010771] ACPI: PCCT 0x00000000BCEDA000 00006E (v05 LENOVO TP-GL 00002550 PTEC 00000002) [ 0.010773] ACPI: SSDT 0x00000000BCED9000 000AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL 20120711) [ 0.010776] ACPI: UEFI 0x00000000BCED8000 000042 (v01 LENOVO TP-GL 00002550 PTEC 00000002) [ 0.010778] ACPI: POAT 0x00000000BCD72000 000055 (v03 LENOVO TP-GL 00002550 PTEC 00000002) [ 0.010781] ACPI: ASF! 0x00000000BCEFC000 0000A5 (v32 LENOVO TP-GL 00002550 PTEC 00000002) [ 0.010783] ACPI: BATB 0x00000000BCED7000 000046 (v01 LENOVO TP-GL 00002550 PTEC 00000002) [ 0.010785] ACPI: FPDT 0x00000000BCED6000 000064 (v01 LENOVO TP-GL 00002550 PTEC 00000002) [ 0.010788] ACPI: UEFI 0x00000000BCED5000 0002E2 (v01 LENOVO TP-GL 00002550 PTEC 00000002) [ 0.010790] ACPI: DMAR 0x00000000BCED4000 0000B8 (v01 LENOVO TP-GL 00002550 PTEC 00000002) [ 0.010798] ACPI: Local APIC address 0xfee00000 [ 0.010882] No NUMA configuration found [ 0.010883] Faking a node at [mem 0x0000000000000000-0x000000033e5fffff] [ 0.010893] NODE_DATA(0) allocated [mem 0x33e5d5000-0x33e5fffff] [ 0.011086] Zone ranges: [ 0.011087] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.011088] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.011088] Normal [mem 0x0000000100000000-0x000000033e5fffff] [ 0.011089] Device empty [ 0.011090] Movable zone start for each node [ 0.011093] Early memory node ranges [ 0.011094] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.011095] node 0: [mem 0x0000000000059000-0x000000000008bfff] [ 0.011095] node 0: [mem 0x0000000000100000-0x00000000aea6efff] [ 0.011096] node 0: [mem 0x00000000aec71000-0x00000000ba300fff] [ 0.011097] node 0: [mem 0x00000000bceff000-0x00000000bcefffff] [ 0.011097] node 0: [mem 0x0000000100000000-0x000000033e5fffff] [ 0.011379] Zeroed struct page in unavailable ranges: 31094 pages [ 0.011381] Initmem setup node 0 [mem 0x0000000000001000-0x000000033e5fffff] [ 0.011382] On node 0 totalpages: 3114634 [ 0.011383] DMA zone: 64 pages used for memmap [ 0.011384] DMA zone: 72 pages reserved [ 0.011385] DMA zone: 3978 pages, LIFO batch:0 [ 0.011431] DMA32 zone: 11844 pages used for memmap [ 0.011432] DMA32 zone: 758016 pages, LIFO batch:63 [ 0.020919] Normal zone: 36760 pages used for memmap [ 0.020920] Normal zone: 2352640 pages, LIFO batch:63 [ 0.045911] Reserving Intel graphics memory at [mem 0xbda00000-0xbf9fffff] [ 0.046069] ACPI: PM-Timer IO Port: 0x1808 [ 0.046071] ACPI: Local APIC address 0xfee00000 [ 0.046078] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.046079] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.046088] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.046090] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.046092] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.046093] ACPI: IRQ0 used by override. [ 0.046094] ACPI: IRQ9 used by override. [ 0.046095] Using ACPI (MADT) for SMP configuration information [ 0.046097] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.046100] TSC deadline timer available [ 0.046101] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.046117] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.046118] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.046119] PM: Registered nosave memory: [mem 0x0008c000-0x000bffff] [ 0.046120] PM: Registered nosave memory: [mem 0x000c0000-0x000dffff] [ 0.046120] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.046122] PM: Registered nosave memory: [mem 0xaea6f000-0xaec70fff] [ 0.046123] PM: Registered nosave memory: [mem 0xb0001000-0xb0001fff] [ 0.046124] PM: Registered nosave memory: [mem 0xb0011000-0xb0011fff] [ 0.046125] PM: Registered nosave memory: [mem 0xb0012000-0xb0012fff] [ 0.046126] PM: Registered nosave memory: [mem 0xb0022000-0xb0022fff] [ 0.046128] PM: Registered nosave memory: [mem 0xba301000-0xbcc0efff] [ 0.046128] PM: Registered nosave memory: [mem 0xbcc0f000-0xbce7efff] [ 0.046129] PM: Registered nosave memory: [mem 0xbce7f000-0xbcefefff] [ 0.046130] PM: Registered nosave memory: [mem 0xbcf00000-0xbf9fffff] [ 0.046130] PM: Registered nosave memory: [mem 0xbfa00000-0xf80f7fff] [ 0.046131] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff] [ 0.046131] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff] [ 0.046132] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.046132] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff] [ 0.046134] [mem 0xbfa00000-0xf80f7fff] available for PCI devices [ 0.046136] Booting paravirtualized kernel on bare hardware [ 0.046138] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.046144] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.046395] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144 [ 0.046401] pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152 [ 0.046402] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.046428] Built 1 zonelists, mobility grouping on. Total pages: 3065894 [ 0.046429] Policy zone: Normal [ 0.046431] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-67-generic root=UUID=7bbc36d4-b65d-4291-a3b9-dc840a88f20a ro quiet splash [ 0.047330] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.047742] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.047814] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.051083] Calgary: detecting Calgary via BIOS EBDA area [ 0.051085] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.081205] Memory: 11970428K/12458536K available (14339K kernel code, 2400K rwdata, 5008K rodata, 2732K init, 4972K bss, 488108K reserved, 0K cma-reserved) [ 0.081210] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0 [ 0.081346] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.081358] Kernel/User page tables isolation: enabled [ 0.081371] ftrace: allocating 44566 entries in 175 pages [ 0.097676] rcu: Hierarchical RCU implementation. [ 0.097678] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.097678] Tasks RCU enabled. [ 0.097679] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.097680] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.100272] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.100565] random: crng done (trusting CPU's manufacturer) [ 0.100588] Console: colour dummy device 80x25 [ 0.100593] printk: console [tty0] enabled [ 0.100610] ACPI: Core revision 20190816 [ 0.100765] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.100778] APIC: Switch to symmetric I/O mode setup [ 0.100779] DMAR: Host address width 39 [ 0.100780] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.100784] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.100785] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.100788] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.100788] DMAR: RMRR base: 0x000000bad92000 end: 0x000000bada8fff [ 0.100789] DMAR: RMRR base: 0x000000bd800000 end: 0x000000bf9fffff [ 0.100791] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.100791] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.100792] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.101235] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.101236] x2apic enabled [ 0.101242] Switched APIC routing to cluster x2apic. [ 0.101665] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.120777] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2564e8e08b9, max_idle_ns: 440795271120 ns [ 0.120781] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.44 BogoMIPS (lpj=10376884) [ 0.120783] pid_max: default: 32768 minimum: 301 [ 0.128813] LSM: Security Framework initializing [ 0.128825] Yama: becoming mindful. [ 0.128864] AppArmor: AppArmor initialized [ 0.128921] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.128946] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.128962] *** VALIDATE tmpfs *** [ 0.129099] *** VALIDATE proc *** [ 0.129148] *** VALIDATE cgroup1 *** [ 0.129149] *** VALIDATE cgroup2 *** [ 0.129202] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.129213] process: using mwait in idle threads [ 0.129216] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.129216] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.129220] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.129221] Spectre V2 : Mitigation: Full generic retpoline [ 0.129221] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.129222] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.129223] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.129223] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.129224] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.129228] SRBDS: Mitigation: Microcode [ 0.129228] MDS: Mitigation: Clear CPU buffers [ 0.129397] Freeing SMP alternatives memory: 40K [ 0.131932] smpboot: CPU0: Intel(R) Core(TM) i5-4300M CPU @ 2.60GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.132045] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.132061] ... version: 3 [ 0.132061] ... bit width: 48 [ 0.132061] ... generic registers: 4 [ 0.132062] ... value mask: 0000ffffffffffff [ 0.132063] ... max period: 00007fffffffffff [ 0.132063] ... fixed-purpose events: 3 [ 0.132063] ... event mask: 000000070000000f [ 0.132096] rcu: Hierarchical SRCU implementation. [ 0.132778] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.132778] smp: Bringing up secondary CPUs ... [ 0.132778] x86: Booting SMP configuration: [ 0.132778] .... node #0, CPUs: #1 [ 0.132778] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.132778] #2 #3 [ 0.133418] smp: Brought up 1 node, 4 CPUs [ 0.133418] smpboot: Max logical packages: 2 [ 0.133418] smpboot: Total of 4 processors activated (20753.76 BogoMIPS) [ 0.134588] devtmpfs: initialized [ 0.134588] x86/mm: Memory block size: 128MB [ 0.134588] PM: Registering ACPI NVS region [mem 0xbcc0f000-0xbce7efff] (2555904 bytes) [ 0.134588] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.134588] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.134588] pinctrl core: initialized pinctrl subsystem [ 0.134588] PM: RTC time: 11:48:45, date: 2021-03-19 [ 0.136861] NET: Registered protocol family 16 [ 0.136944] audit: initializing netlink subsys (disabled) [ 0.136949] audit: type=2000 audit(1616154525.036:1): state=initialized audit_enabled=0 res=1 [ 0.136949] EISA bus registered [ 0.136949] cpuidle: using governor ladder [ 0.136949] cpuidle: using governor menu [ 0.136949] Detected 1 PCC Subspaces [ 0.136949] Registering PCC driver as Mailbox controller [ 0.136951] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.136952] ACPI: bus type PCI registered [ 0.136953] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.137124] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.137137] PCI: not using MMCONFIG [ 0.137137] PCI: Using configuration type 1 for base access [ 0.137161] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.137622] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.138126] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.138126] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.138126] ACPI: Added _OSI(Module Device) [ 0.138126] ACPI: Added _OSI(Processor Device) [ 0.138126] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.138126] ACPI: Added _OSI(Processor Aggregator Device) [ 0.138126] ACPI: Added _OSI(Linux-Dell-Video) [ 0.138126] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.138126] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.153300] ACPI: 9 ACPI AML tables successfully acquired and loaded [ 0.153935] ACPI: EC: EC started [ 0.153936] ACPI: EC: interrupt blocked [ 0.154927] ACPI: \: Used as first EC [ 0.154929] ACPI: \: GPE=0x11, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.154929] ACPI: EC: Boot ECDT EC used to handle transactions [ 0.155268] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.159897] ACPI Error: Needed type [Reference], found [Integer] 00000000845b4cf7 (20190816/exresop-66) [ 0.159908] fbcon: Taking over console [ 0.159910] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20190816/dswexec-431) [ 0.159919] No Local Variables are initialized for Method [_PDC] [ 0.159920] Initialized Arguments for Method [_PDC]: (1 arguments defined for method invocation) [ 0.159921] Arg0: 000000004d4c9a4b Buffer(12) 01 00 00 00 01 00 00 00 [ 0.159926] ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20190816/psparse-529) [ 0.160307] ACPI: Dynamic OEM Table Load: [ 0.160315] ACPI: SSDT 0xFFFF9F9EEFFFB000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.164916] ACPI: Dynamic OEM Table Load: [ 0.164923] ACPI: SSDT 0xFFFF9F9EEF99BA00 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.166483] ACPI: Interpreter enabled [ 0.166509] ACPI: (supports S0 S3 S4 S5) [ 0.166509] ACPI: Using IOAPIC for interrupt routing [ 0.166533] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.167149] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.167157] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.167469] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.170947] ACPI: Power Resource [PUBS] (on) [ 0.171233] ACPI: Power Resource [NVP3] (on) [ 0.171260] ACPI: Power Resource [NVP2] (on) [ 0.172227] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1) [ 0.175620] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.175703] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.175784] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.175863] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.175943] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.176022] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.176101] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.176179] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.176272] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.176276] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.176435] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PCIeCapability LTR] [ 0.176506] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.176507] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.176509] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.176510] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.176713] PCI host bridge to bus 0000:00 [ 0.176715] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.176716] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.176717] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.176718] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff window] [ 0.176719] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] [ 0.176720] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.176729] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000 [ 0.176815] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000 [ 0.176825] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit] [ 0.176830] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.176833] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.176844] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.176922] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.176930] pci 0000:00:03.0: reg 0x10: [mem 0xe0630000-0xe0633fff 64bit] [ 0.177039] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.177059] pci 0000:00:14.0: reg 0x10: [mem 0xe0620000-0xe062ffff 64bit] [ 0.177114] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.177193] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.177214] pci 0000:00:16.0: reg 0x10: [mem 0xe0639000-0xe063900f 64bit] [ 0.177273] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.177342] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 [ 0.177359] pci 0000:00:19.0: reg 0x10: [mem 0xe0600000-0xe061ffff] [ 0.177366] pci 0000:00:19.0: reg 0x14: [mem 0xe063f000-0xe063ffff] [ 0.177374] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 0.177427] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.177504] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.177524] pci 0000:00:1a.0: reg 0x10: [mem 0xe063e000-0xe063e3ff] [ 0.177602] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.177683] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.177702] pci 0000:00:1b.0: reg 0x10: [mem 0xe0634000-0xe0637fff 64bit] [ 0.177768] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.177842] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.177918] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.178060] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.178137] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.178283] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.178304] pci 0000:00:1d.0: reg 0x10: [mem 0xe063d000-0xe063d3ff] [ 0.178382] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.178463] pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100 [ 0.178630] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601 [ 0.178645] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] [ 0.178652] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7] [ 0.178659] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] [ 0.178666] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3] [ 0.178672] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.178679] pci 0000:00:1f.2: reg 0x24: [mem 0xe063c000-0xe063c7ff] [ 0.178712] pci 0000:00:1f.2: PME# supported from D3hot [ 0.178784] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.178801] pci 0000:00:1f.3: reg 0x10: [mem 0xe0638000-0xe06380ff 64bit] [ 0.178819] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.178996] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000 [ 0.179063] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe0500fff] [ 0.179277] pci 0000:02:00.0: supports D1 D2 [ 0.179278] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.188836] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.188841] pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff] [ 0.188957] pci 0000:03:00.0: [8086:088f] type 00 class 0x028000 [ 0.189043] pci 0000:03:00.0: reg 0x10: [mem 0xe0400000-0xe0401fff 64bit] [ 0.189308] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.189541] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.189546] pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff] [ 0.190560] ACPI: EC: interrupt unblocked [ 0.190561] ACPI: EC: event unblocked [ 0.190567] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.190568] ACPI: \_SB_.PCI0.LPC_.EC__: Boot DSDT EC used to handle transactions and events [ 0.190634] iommu: Default domain type: Translated [ 0.190634] SCSI subsystem initialized [ 0.190634] libata version 3.00 loaded. [ 0.190634] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.190634] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.190634] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.190634] vgaarb: loaded [ 0.190634] ACPI: bus type USB registered [ 0.190634] usbcore: registered new interface driver usbfs [ 0.190634] usbcore: registered new interface driver hub [ 0.190634] usbcore: registered new device driver usb [ 0.190634] pps_core: LinuxPPS API ver. 1 registered [ 0.190634] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.190634] PTP clock support registered [ 0.190634] EDAC MC: Ver: 3.0.0 [ 0.190634] Registered efivars operations [ 0.190634] PCI: Using ACPI for IRQ routing [ 0.190634] PCI: pci_cache_line_size set to 64 bytes [ 0.190634] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.190634] e820: reserve RAM buffer [mem 0x0008c000-0x0008ffff] [ 0.190634] e820: reserve RAM buffer [mem 0xaea6f000-0xafffffff] [ 0.190634] e820: reserve RAM buffer [mem 0xb0001018-0xb3ffffff] [ 0.190634] e820: reserve RAM buffer [mem 0xb0012018-0xb3ffffff] [ 0.190634] e820: reserve RAM buffer [mem 0xba301000-0xbbffffff] [ 0.190634] e820: reserve RAM buffer [mem 0xbcf00000-0xbfffffff] [ 0.190634] e820: reserve RAM buffer [mem 0x33e600000-0x33fffffff] [ 0.190634] NetLabel: Initializing [ 0.190634] NetLabel: domain hash size = 128 [ 0.190634] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.190634] NetLabel: unlabeled traffic allowed by default [ 0.193391] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.193394] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.195416] clocksource: Switched to clocksource tsc-early [ 0.204474] *** VALIDATE bpf *** [ 0.204532] VFS: Disk quotas dquot_6.6.0 [ 0.204549] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.204573] *** VALIDATE ramfs *** [ 0.204576] *** VALIDATE hugetlbfs *** [ 0.204655] AppArmor: AppArmor Filesystem Enabled [ 0.204682] pnp: PnP ACPI init [ 0.205247] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.205249] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.205250] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.205251] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved [ 0.205252] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved [ 0.205253] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.205254] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved [ 0.205255] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved [ 0.205256] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved [ 0.205259] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.205260] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.205261] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.205262] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.205263] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.205265] system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved [ 0.205266] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.205271] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.205417] system 00:01: [io 0x1800-0x187f] has been reserved [ 0.205419] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.205420] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.205421] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.205422] system 00:01: [io 0x1640-0x165f] has been reserved [ 0.205423] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved [ 0.205425] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved [ 0.205426] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.205427] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.205428] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.205429] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.205430] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.205431] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.205434] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.205490] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.205508] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active) [ 0.205523] pnp 00:04: Plug and Play ACPI device, IDs LEN0036 PNP0f13 (active) [ 0.205923] pnp: PnP ACPI: found 5 devices [ 0.206974] thermal_sys: Registered thermal governor 'fair_share' [ 0.206975] thermal_sys: Registered thermal governor 'bang_bang' [ 0.206976] thermal_sys: Registered thermal governor 'step_wise' [ 0.206976] thermal_sys: Registered thermal governor 'user_space' [ 0.206977] thermal_sys: Registered thermal governor 'power_allocator' [ 0.211470] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.211502] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.211508] pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff] [ 0.211514] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.211518] pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff] [ 0.211526] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.211527] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.211528] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.211529] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff window] [ 0.211530] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window] [ 0.211531] pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff] [ 0.211532] pci_bus 0000:03: resource 1 [mem 0xe0400000-0xe04fffff] [ 0.211642] NET: Registered protocol family 2 [ 0.211800] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.211880] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.212062] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.212134] TCP: Hash tables configured (established 131072 bind 65536) [ 0.212178] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.212219] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.212284] NET: Registered protocol family 1 [ 0.212288] NET: Registered protocol family 44 [ 0.212298] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.212792] PCI: CLS 64 bytes, default 64 [ 0.212832] Trying to unpack rootfs image as initramfs... [ 0.404038] Freeing initrd memory: 84824K [ 0.416835] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.416837] software IO TLB: mapped [mem 0xa8ff7000-0xacff7000] (64MB) [ 0.417003] check: Scanning for low memory corruption every 60 seconds [ 0.417385] Initialise system trusted keyrings [ 0.417396] Key type blacklist registered [ 0.417425] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.418577] zbud: loaded [ 0.418886] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.419022] fuse: init (API version 7.31) [ 0.419038] *** VALIDATE fuse *** [ 0.419039] *** VALIDATE fuse *** [ 0.419118] Platform Keyring initialized [ 0.423231] Key type asymmetric registered [ 0.423232] Asymmetric key parser 'x509' registered [ 0.423241] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.423271] io scheduler mq-deadline registered [ 0.423716] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.423768] efifb: probing for efifb [ 0.423778] efifb: No BGRT, not showing boot graphics [ 0.423779] efifb: framebuffer at 0xc0000000, using 1200k, total 1200k [ 0.423780] efifb: mode is 640x480x32, linelength=2560, pages=1 [ 0.423780] efifb: scrolling: redraw [ 0.423782] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.423855] Console: switching to colour frame buffer device 80x30 [ 0.424504] fb0: EFI VGA frame buffer device [ 0.424511] intel_idle: MWAIT substates: 0x42120 [ 0.424512] intel_idle: v0.4.1 model 0x3C [ 0.424685] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.424948] ACPI: AC Adapter [AC] (on-line) [ 0.425003] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.425034] ACPI: Lid Switch [LID] [ 0.425060] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.425080] ACPI: Sleep Button [SLPB] [ 0.425121] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.425137] ACPI: Power Button [PWRF] [ 0.426805] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.426806] ACPI: Thermal Zone [THM0] (61 C) [ 0.426943] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.428449] Linux agpgart interface v0.103 [ 0.431401] loop: module loaded [ 0.431665] libphy: Fixed MDIO Bus: probed [ 0.431666] tun: Universal TUN/TAP device driver, 1.6 [ 0.431784] PPP generic driver version 2.4.2 [ 0.432014] VFIO - User Level meta-driver version: 0.3 [ 0.432153] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.432156] ehci-pci: EHCI PCI platform driver [ 0.432272] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.432277] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.432287] ehci-pci 0000:00:1a.0: debug port 2 [ 0.436194] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.436210] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe063e000 [ 0.436924] battery: ACPI: Battery Slot [BAT0] (battery present) [ 0.448839] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.448894] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.448895] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.448896] usb usb1: Product: EHCI Host Controller [ 0.448897] usb usb1: Manufacturer: Linux 5.4.0-67-generic ehci_hcd [ 0.448898] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.449095] hub 1-0:1.0: USB hub found [ 0.449100] hub 1-0:1.0: 3 ports detected [ 0.449369] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.449373] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.449383] ehci-pci 0000:00:1d.0: debug port 2 [ 0.453281] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.453294] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe063d000 [ 0.468840] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.468907] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.468908] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.468910] usb usb2: Product: EHCI Host Controller [ 0.468911] usb usb2: Manufacturer: Linux 5.4.0-67-generic ehci_hcd [ 0.468911] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.469107] hub 2-0:1.0: USB hub found [ 0.469112] hub 2-0:1.0: 3 ports detected [ 0.469292] ehci-platform: EHCI generic platform driver [ 0.469310] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.469313] ohci-pci: OHCI PCI platform driver [ 0.469323] ohci-platform: OHCI generic platform driver [ 0.469330] uhci_hcd: USB Universal Host Controller Interface driver [ 0.469449] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.469455] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.470507] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.470511] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.470665] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.470666] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.470667] usb usb3: Product: xHCI Host Controller [ 0.470668] usb usb3: Manufacturer: Linux 5.4.0-67-generic xhci-hcd [ 0.470669] usb usb3: SerialNumber: 0000:00:14.0 [ 0.470828] hub 3-0:1.0: USB hub found [ 0.470846] hub 3-0:1.0: 15 ports detected [ 0.474110] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.474112] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.474115] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.474145] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 0.474146] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.474147] usb usb4: Product: xHCI Host Controller [ 0.474148] usb usb4: Manufacturer: Linux 5.4.0-67-generic xhci-hcd [ 0.474148] usb usb4: SerialNumber: 0000:00:14.0 [ 0.474308] hub 4-0:1.0: USB hub found [ 0.474320] hub 4-0:1.0: 6 ports detected [ 0.475308] usb: port power management may be unreliable [ 0.475879] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.477428] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.477432] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.477674] mousedev: PS/2 mouse device common for all mice [ 0.477956] rtc_cmos 00:02: RTC can wake from S4 [ 0.478151] rtc_cmos 00:02: registered as rtc0 [ 0.478162] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.478166] i2c /dev entries driver [ 0.478222] device-mapper: uevent: version 1.0.3 [ 0.478286] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 0.478302] platform eisa.0: Probing EISA bus 0 [ 0.478303] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.478304] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.478305] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.478306] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.478306] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.478307] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.478308] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.478309] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.478309] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.478310] platform eisa.0: EISA: Detected 0 cards [ 0.478315] intel_pstate: Intel P-state driver initializing [ 0.478463] ledtrig-cpu: registered to indicate activity on CPUs [ 0.478466] EFI Variables Facility v0.08 2004-May-17 [ 0.480578] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.492271] drop_monitor: Initializing network drop monitor service [ 0.492411] NET: Registered protocol family 10 [ 0.497282] Segment Routing with IPv6 [ 0.497301] NET: Registered protocol family 17 [ 0.497329] Key type dns_resolver registered [ 0.497498] RAS: Correctable Errors collector initialized. [ 0.497527] microcode: sig=0x306c3, pf=0x10, revision=0x28 [ 0.497557] microcode: Microcode Update Driver: v2.2. [ 0.497561] IPI shorthand broadcast: enabled [ 0.497566] sched_clock: Marking stable (497233147, 321507)->(523411183, -25856529) [ 0.497615] registered taskstats version 1 [ 0.497622] Loading compiled-in X.509 certificates [ 0.498258] Loaded X.509 cert 'Build time autogenerated kernel key: 94aab4eff3692c1dc967cbf81b568f930ac61570' [ 0.498915] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 0.499489] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 0.499511] zswap: loaded using pool lzo/zbud [ 0.499560] Key type ._fscrypt registered [ 0.499561] Key type .fscrypt registered [ 0.503680] Key type big_key registered [ 0.505725] Key type encrypted registered [ 0.505728] AppArmor: AppArmor sha1 policy hashing enabled [ 0.506115] integrity: Loading X.509 certificate: UEFI:db [ 0.506142] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.506143] integrity: Loading X.509 certificate: UEFI:db [ 0.506158] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.506158] integrity: Loading X.509 certificate: UEFI:db [ 0.506169] integrity: Loaded X.509 cert 'Lenovo Ltd.: ThinkPad Product CA 2012: 838b1f54c1550463f45f98700640f11069265949' [ 0.506497] integrity: Loading X.509 certificate: UEFI:MokListRT [ 0.506511] integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469' [ 0.506511] integrity: Loading X.509 certificate: UEFI:MokListRT [ 0.506732] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 0.507248] ima: No TPM chip found, activating TPM-bypass! [ 0.507251] ima: Allocated hash algorithm: sha1 [ 0.507255] ima: No architecture policies found [ 0.507262] evm: Initialising EVM extended attributes: [ 0.507262] evm: security.selinux [ 0.507263] evm: security.SMACK64 [ 0.507263] evm: security.SMACK64EXEC [ 0.507263] evm: security.SMACK64TRANSMUTE [ 0.507264] evm: security.SMACK64MMAP [ 0.507264] evm: security.apparmor [ 0.507264] evm: security.ima [ 0.507265] evm: security.capability [ 0.507265] evm: HMAC attrs: 0x1 [ 0.507657] PM: Magic number: 13:362:833 [ 0.507658] PM: hash matches drivers/base/power/main.c:1038 [ 0.507754] rtc_cmos 00:02: setting system clock to 2021-03-19T11:48:46 UTC (1616154526) [ 0.508588] Freeing unused decrypted memory: 2040K [ 0.508945] Freeing unused kernel image memory: 2732K [ 0.520907] Write protecting the kernel read-only data: 22528k [ 0.521335] Freeing unused kernel image memory: 2008K [ 0.521504] Freeing unused kernel image memory: 1136K [ 0.529175] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.529176] x86/mm: Checking user space page tables [ 0.536420] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.536422] Run /init as init process [ 0.607144] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 0.607205] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 0.614373] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\_SB.PCI0.LPC.PMIO) (20190816/utaddress-204) [ 0.614377] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.614379] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\_SB.PCI0.LPC.LPIO) (20190816/utaddress-204) [ 0.614381] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.614382] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\_SB.PCI0.LPC.LPIO) (20190816/utaddress-204) [ 0.614384] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.614384] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\_SB.PCI0.LPC.LPIO) (20190816/utaddress-204) [ 0.614386] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.614386] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 0.614934] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.614934] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.615561] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.619940] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.619966] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.621669] ahci 0000:00:1f.2: version 3.0 [ 0.621863] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x23 impl SATA mode [ 0.621866] ahci 0000:00:1f.2: flags: 64bit ncq ilck pm led clo pio slum part ems apst [ 0.649375] scsi host0: ahci [ 0.649517] scsi host1: ahci [ 0.649641] scsi host2: ahci [ 0.649739] scsi host3: ahci [ 0.649827] scsi host4: ahci [ 0.649901] scsi host5: ahci [ 0.649940] ata1: SATA max UDMA/133 abar m2048@0xe063c000 port 0xe063c100 irq 31 [ 0.649942] ata2: SATA max UDMA/133 abar m2048@0xe063c000 port 0xe063c180 irq 31 [ 0.649943] ata3: DUMMY [ 0.649944] ata4: DUMMY [ 0.649944] ata5: DUMMY [ 0.649947] ata6: SATA max UDMA/133 abar m2048@0xe063c000 port 0xe063c380 irq 31 [ 0.654683] cryptd: max_cpu_qlen set to 1000 [ 0.661121] AVX2 version of gcm_enc/dec engaged. [ 0.661122] AES CTR mode by8 optimization enabled [ 0.683466] checking generic (c0000000 12c000) vs hw (c0000000 20000000) [ 0.683467] fb0: switching to inteldrmfb from EFI VGA [ 0.683522] Console: switching to colour dummy device 80x25 [ 0.683538] i915 0000:00:02.0: vgaarb: deactivate vga console [ 0.692868] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.692869] [drm] Driver supports precise vblank timestamp query. [ 0.692897] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.704284] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 0.755436] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 [ 0.757275] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 0.757755] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 0.781277] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:e8:f8:0a [ 0.781279] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 0.781327] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF [ 0.782041] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 0.796821] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.812828] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.812840] usb 3-6: new full-speed USB device number 2 using xhci_hcd [ 0.953227] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04 [ 0.953228] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.953486] hub 1-1:1.0: USB hub found [ 0.953597] hub 1-1:1.0: 6 ports detected [ 0.962894] usb 3-6: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=22.01 [ 0.962895] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 0.962896] usb 3-6: Product: USB Receiver [ 0.962896] usb 3-6: Manufacturer: Logitech [ 0.964814] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.966526] hidraw: raw HID events driver (C) Jiri Kosina [ 0.968465] ata6.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 0.968466] ata6.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 0.968467] ata6.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 0.968813] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.968842] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.969214] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ 0.969215] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.969357] hub 2-1:1.0: USB hub found [ 0.969451] hub 2-1:1.0: 8 ports detected [ 0.969780] usbcore: registered new interface driver usbhid [ 0.969781] usbhid: USB HID core driver [ 0.970537] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 0.970539] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 0.970540] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 0.971658] ata6.00: ATA-8: WDC WD7500BPVT-60HXZT3, 01.01A01, max UDMA/133 [ 0.971659] ata6.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 0.972172] ata1.00: ATA-8: WDC WD3200BEKT-75PVMT1, 01.01A01, max UDMA/133 [ 0.972173] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 0.972401] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:046D:C52F.0001/input/input7 [ 0.972515] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-6/input0 [ 0.972721] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:046D:C52F.0002/input/input8 [ 0.973398] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 0.973400] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 0.973811] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 0.973813] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 0.973815] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 0.975548] ata6.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 0.975550] ata6.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 0.975552] ata6.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 0.975665] ata1.00: configured for UDMA/133 [ 0.975878] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-7 1A01 PQ: 0 ANSI: 5 [ 0.976063] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.976110] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 0.976123] sd 0:0:0:0: [sda] Write Protect is off [ 0.976125] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.976150] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.979255] ata6.00: configured for UDMA/133 [ 0.982081] ata2.00: ATA-9: MidasForce SSD 128GB, T0722A0, max UDMA/133 [ 0.982082] ata2.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 0.990858] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 0.990861] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 0.993378] fbcon: i915drmfb (fb0) is primary device [ 0.999546] ata2.00: configured for UDMA/133 [ 1.013054] scsi 1:0:0:0: Direct-Access ATA MidasForce SSD 1 2A0 PQ: 0 ANSI: 5 [ 1.013364] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.013435] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.013450] sd 1:0:0:0: [sdb] Write Protect is off [ 1.013452] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.013473] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.013554] scsi 5:0:0:0: Direct-Access ATA WDC WD7500BPVT-6 1A01 PQ: 0 ANSI: 5 [ 1.013668] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 1.013745] sd 5:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/699 GiB) [ 1.013746] sd 5:0:0:0: [sdc] 4096-byte physical blocks [ 1.013757] sd 5:0:0:0: [sdc] Write Protect is off [ 1.013760] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.013805] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.029025] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-6/input1 [ 1.042369] sdb: sdb1 sdb2 [ 1.042703] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.069075] logitech-djreceiver 0003:046D:C52F.0001: hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-6/input0 [ 1.072565] sda: sda1 sda2 sda3 sda4 [ 1.072978] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.088829] usb 3-7: new full-speed USB device number 3 using xhci_hcd [ 1.101818] sdc: sdc1 sdc2 sdc3 [ 1.102493] sd 5:0:0:0: [sdc] Attached SCSI disk [ 1.169205] logitech-djreceiver 0003:046D:C52F.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-6/input1 [ 1.230793] logitech-djreceiver 0003:046D:C52F.0002: device of type eQUAD step 4 DJ (0x04) connected on slot 1 [ 1.231047] input: Logitech Wireless Mouse PID:4008 Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:046D:C52F.0002/0003:046D:4008.0003/input/input11 [ 1.231124] input: Logitech Wireless Mouse PID:4008 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:046D:C52F.0002/0003:046D:4008.0003/input/input12 [ 1.231170] hid-generic 0003:046D:4008.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4008] on usb-0000:00:14.0-6/input1:1 [ 1.239511] usb 3-7: New USB device found, idVendor=138a, idProduct=0017, bcdDevice= 0.78 [ 1.239513] usb 3-7: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 1.239515] usb 3-7: SerialNumber: 53f8b0f8aee1 [ 1.327016] input: Logitech M185/M225 as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:046D:C52F.0002/0003:046D:4008.0003/input/input16 [ 1.327154] logitech-hidpp-device 0003:046D:4008.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech M185/M225] on usb-0000:00:14.0-6/input1:1 [ 1.368808] usb 3-11: new full-speed USB device number 4 using xhci_hcd [ 1.410263] psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4684] [ 1.442310] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1170..] [ 1.442314] psmouse serio1: synaptics: Trying to set up SMBus access [ 1.444856] tsc: Refined TSC clocksource calibration: 2593.992 MHz [ 1.444864] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25641074d3b, max_idle_ns: 440795244898 ns [ 1.444889] clocksource: Switched to clocksource tsc [ 1.520729] usb 3-11: New USB device found, idVendor=8087, idProduct=07da, bcdDevice=78.69 [ 1.520731] usb 3-11: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.648859] usb 3-12: new high-speed USB device number 5 using xhci_hcd [ 1.867640] usb 3-12: New USB device found, idVendor=04ca, idProduct=7035, bcdDevice=10.04 [ 1.867642] usb 3-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.867643] usb 3-12: Product: Integrated Camera [ 1.867644] usb 3-12: Manufacturer: J8LF155Z6 [ 2.115603] Console: switching to colour frame buffer device 200x56 [ 2.134912] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 4.124794] raid6: avx2x4 gen() 28385 MB/s [ 4.172793] raid6: avx2x4 xor() 17797 MB/s [ 4.220794] raid6: avx2x2 gen() 24815 MB/s [ 4.268782] raid6: avx2x2 xor() 15312 MB/s [ 4.316795] raid6: avx2x1 gen() 21387 MB/s [ 4.364781] raid6: avx2x1 xor() 14543 MB/s [ 4.412794] raid6: sse2x4 gen() 15843 MB/s [ 4.460794] raid6: sse2x4 xor() 10000 MB/s [ 4.508794] raid6: sse2x2 gen() 13242 MB/s [ 4.556782] raid6: sse2x2 xor() 8672 MB/s [ 4.604795] raid6: sse2x1 gen() 11248 MB/s [ 4.652795] raid6: sse2x1 xor() 7906 MB/s [ 4.652796] raid6: using algorithm avx2x4 gen() 28385 MB/s [ 4.652796] raid6: .... xor() 17797 MB/s, rmw enabled [ 4.652796] raid6: using avx2x2 recovery algorithm [ 4.655230] xor: automatically using best checksumming function avx [ 4.669644] Btrfs loaded, crc32c=crc32c-intel [ 5.455874] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 5.644758] systemd[1]: Inserted module 'autofs4' [ 5.707169] systemd[1]: systemd 245.4-4ubuntu3.5 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 5.724958] systemd[1]: Detected architecture x86-64. [ 5.741781] systemd[1]: Set hostname to . [ 5.869364] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 5.930122] systemd[1]: Created slice system-modprobe.slice. [ 5.930381] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.930583] systemd[1]: Created slice User and Session Slice. [ 5.930634] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.930796] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.930826] systemd[1]: Reached target User and Group Name Lookups. [ 5.930837] systemd[1]: Reached target Remote File Systems. [ 5.930844] systemd[1]: Reached target Slices. [ 5.930906] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 5.930984] systemd[1]: Listening on LVM2 poll daemon socket. [ 5.931042] systemd[1]: Listening on Syslog Socket. [ 5.931103] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.931148] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 5.931283] systemd[1]: Listening on Journal Audit Socket. [ 5.931343] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.931426] systemd[1]: Listening on Journal Socket. [ 5.931498] systemd[1]: Listening on udev Control Socket. [ 5.931552] systemd[1]: Listening on udev Kernel Socket. [ 5.932330] systemd[1]: Mounting Huge Pages File System... [ 5.933152] systemd[1]: Mounting POSIX Message Queue File System... [ 5.934349] systemd[1]: Mounting Kernel Debug File System... [ 5.935527] systemd[1]: Mounting Kernel Trace File System... [ 5.936864] systemd[1]: Starting Journal Service... [ 5.938065] systemd[1]: Starting Availability of block devices... [ 5.939677] systemd[1]: Starting Set the console keyboard layout... [ 5.940896] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 5.941996] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 5.942052] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 5.943302] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 5.943347] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 5.945992] systemd[1]: Starting Load Kernel Modules... [ 5.947451] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.948792] systemd[1]: Starting udev Coldplug all Devices... [ 5.950157] systemd[1]: Starting Uncomplicated firewall... [ 5.952265] systemd[1]: Mounted Huge Pages File System. [ 5.952469] systemd[1]: Mounted POSIX Message Queue File System. [ 5.952629] systemd[1]: Mounted Kernel Debug File System. [ 5.952931] systemd[1]: Mounted Kernel Trace File System. [ 5.954617] systemd[1]: Finished Availability of block devices. [ 5.955978] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 5.957060] systemd[1]: Finished Uncomplicated firewall. [ 5.959333] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro [ 5.961915] systemd[1]: Finished Remount Root and Kernel File Systems. [ 5.963816] systemd[1]: Activating swap /swapfile... [ 5.966100] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 5.966164] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 5.967519] systemd[1]: Starting Load/Save Random Seed... [ 5.968833] systemd[1]: Starting Create System Users... [ 5.983614] lp: driver loaded but no devices found [ 5.998100] systemd[1]: Finished Load/Save Random Seed. [ 6.001692] systemd[1]: Finished Create System Users. [ 6.002905] systemd[1]: Starting Create Static Device Nodes in /dev... [ 6.003483] ppdev: user-space parallel port driver [ 6.020303] systemd[1]: Finished Load Kernel Modules. [ 6.021723] systemd[1]: Mounting FUSE Control File System... [ 6.023014] systemd[1]: Mounting Kernel Configuration File System... [ 6.024129] systemd[1]: Starting Apply Kernel Variables... [ 6.024901] systemd[1]: Finished Create Static Device Nodes in /dev. [ 6.026325] systemd[1]: Starting udev Kernel Device Manager... [ 6.027494] systemd[1]: Mounted FUSE Control File System. [ 6.027670] systemd[1]: Mounted Kernel Configuration File System. [ 6.047058] systemd[1]: Finished Apply Kernel Variables. [ 6.092802] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS [ 6.092879] systemd[1]: Activated swap /swapfile. [ 6.092993] systemd[1]: Reached target Swap. [ 6.102148] systemd[1]: Finished udev Coldplug all Devices. [ 6.103766] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ 6.103878] systemd[1]: Started Journal Service. [ 6.115644] systemd-journald[337]: Received client request to flush runtime journal. [ 6.548357] EDAC ie31200: No ECC support [ 6.548387] EDAC ie31200: No ECC support [ 6.643699] Non-volatile memory driver v1.3 [ 6.659723] thinkpad_acpi: ThinkPad ACPI Extras v0.26 [ 6.659725] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 6.659726] thinkpad_acpi: ThinkPad BIOS GLETA1WW (2.55 ), EC GLHT30WW [ 6.659727] thinkpad_acpi: Lenovo ThinkPad T440p, model 20AWS0DS0T [ 6.673584] mc: Linux media interface: v0.10 [ 6.683961] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 6.684491] thinkpad_acpi: radio switch found; radios are enabled [ 6.684509] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 6.684509] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 6.702670] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18 [ 6.702730] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19 [ 6.702784] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20 [ 6.702844] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21 [ 6.702897] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22 [ 6.714889] videodev: Linux video capture interface: v2.00 [ 6.716921] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 6.731831] Bluetooth: Core ver 2.22 [ 6.731848] NET: Registered protocol family 31 [ 6.731849] Bluetooth: HCI device and connection manager initialized [ 6.731853] Bluetooth: HCI socket layer initialized [ 6.731855] Bluetooth: L2CAP socket layer initialized [ 6.731858] Bluetooth: SCO socket layer initialized [ 6.738018] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 6.738021] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.738023] snd_hda_codec_realtek hdaudioC1D0: hp_outs=2 (0x16/0x15/0x0/0x0/0x0) [ 6.738024] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 6.738025] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 6.738027] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 6.738028] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a [ 6.738029] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 6.746933] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 6.746934] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 6.746935] RAPL PMU: hw unit of domain package 2^-14 Joules [ 6.746936] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 6.746936] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 6.768932] usbcore: registered new interface driver btusb [ 6.774148] uvcvideo: Found UVC 1.00 device Integrated Camera (04ca:7035) [ 6.775507] thinkpad_acpi: battery 1 registered (start 0, stop 100) [ 6.775512] battery: new extension: ThinkPad Battery Extension [ 6.775567] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input17 [ 6.785904] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23 [ 6.785962] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input24 [ 6.786023] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input25 [ 6.786078] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input26 [ 6.790129] rmi4_smbus 0-002c: registering SMbus-connected sensor [ 6.796291] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.0/input/input27 [ 6.796377] usbcore: registered new interface driver uvcvideo [ 6.796378] USB Video Class driver (1.1.1) [ 6.865802] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: tm2964-001, fw id: 1637231 [ 6.931681] input: Synaptics tm2964-001 as /devices/rmi4-00/input/input28 [ 6.939150] serio: RMI4 PS/2 pass-through port at rmi4-00.fn03 [ 7.044875] usb 3-11: USB disconnect, device number 4 [ 7.140778] intel_rapl_common: Found RAPL domain package [ 7.140787] intel_rapl_common: Found RAPL domain core [ 7.140788] intel_rapl_common: Found RAPL domain uncore [ 7.140789] intel_rapl_common: Found RAPL domain dram [ 7.296796] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 7.347102] input: TPPS/2 IBM TrackPoint as /devices/rmi4-00/rmi4-00.fn03/serio2/input/input29 [ 7.811420] audit: type=1400 audit(1616154533.797:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=829 comm="apparmor_parser" [ 7.817798] audit: type=1400 audit(1616154533.805:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=826 comm="apparmor_parser" [ 7.825972] audit: type=1400 audit(1616154533.813:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=827 comm="apparmor_parser" [ 7.825975] audit: type=1400 audit(1616154533.813:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=827 comm="apparmor_parser" [ 7.847184] audit: type=1400 audit(1616154533.833:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=830 comm="apparmor_parser" [ 7.847189] audit: type=1400 audit(1616154533.833:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=830 comm="apparmor_parser" [ 7.847192] audit: type=1400 audit(1616154533.833:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=830 comm="apparmor_parser" [ 7.849272] audit: type=1400 audit(1616154533.837:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=831 comm="apparmor_parser" [ 7.851098] audit: type=1400 audit(1616154533.837:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=828 comm="apparmor_parser" [ 7.851102] audit: type=1400 audit(1616154533.837:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=828 comm="apparmor_parser" [ 8.191177] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.191179] Bluetooth: BNEP filters: protocol multicast [ 8.191183] Bluetooth: BNEP socket layer initialized [ 11.172556] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 11.172559] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO [ 11.172599] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 15.438827] logitech-hidpp-device 0003:046D:4008.0003: HID++ 2.0 device connected. [ 100.152270] JFS: nTxBlock = 8192, nTxLock = 65536 [ 100.188225] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 676.410855] EXT4-fs (sdc3): warning: mounting unchecked fs, running e2fsck is recommended [ 676.465769] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null) [ 1521.951784] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 1521.972890] QNX4 filesystem 0.2.3 registered. [ 2375.279516] PPP MPPE Compression module registered [ 3112.075012] PM: suspend entry (deep) [ 3112.079675] Filesystems sync: 0.004 seconds [ 3112.079866] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 3112.082572] OOM killer disabled. [ 3112.082572] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 3112.083898] printk: Suspending console(s) (use no_console_suspend to debug) [ 3112.175532] e1000e: EEE TX LPI TIMER: 00000011 [ 3112.256822] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 3112.256888] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 3112.256907] sd 5:0:0:0: [sdc] Synchronizing SCSI cache [ 3112.256916] sd 1:0:0:0: [sdb] Stopping disk [ 3112.257757] sd 5:0:0:0: [sdc] Stopping disk [ 3112.257815] sd 0:0:0:0: [sda] Stopping disk [ 3112.898132] ACPI: EC: interrupt blocked [ 3112.917467] ACPI: Preparing to enter system sleep state S3 [ 3112.922454] ACPI: EC: event blocked [ 3112.922455] ACPI: EC: EC stopped [ 3112.922456] PM: Saving platform NVS memory [ 3112.922496] Disabling non-boot CPUs ... [ 3112.923049] IRQ 32: no longer affine to CPU1 [ 3112.924105] smpboot: CPU 1 is now offline [ 3112.929593] IRQ 31: no longer affine to CPU2 [ 3112.930607] smpboot: CPU 2 is now offline [ 3112.933364] IRQ 16: no longer affine to CPU3 [ 3112.933368] IRQ 23: no longer affine to CPU3 [ 3112.933371] IRQ 28: no longer affine to CPU3 [ 3112.934378] smpboot: CPU 3 is now offline [ 3112.937694] ACPI: Low-level resume complete [ 3112.937736] ACPI: EC: EC started [ 3112.937737] PM: Restoring platform NVS memory [ 3112.938105] Enabling non-boot CPUs ... [ 3112.938144] x86: Booting SMP configuration: [ 3112.938144] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 3112.938847] CPU1 is up [ 3112.938876] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 3112.939493] CPU2 is up [ 3112.939516] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 3112.940436] CPU3 is up [ 3112.943979] ACPI: Waking up from system sleep state S3 [ 3112.953340] ACPI: EC: interrupt unblocked [ 3112.995061] usb usb3: root hub lost power or was reset [ 3112.995065] usb usb4: root hub lost power or was reset [ 3112.998427] ACPI: EC: event unblocked [ 3113.002517] sd 0:0:0:0: [sda] Starting disk [ 3113.003253] sd 1:0:0:0: [sdb] Starting disk [ 3113.007374] sd 5:0:0:0: [sdc] Starting disk [ 3113.241681] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 3113.241717] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 3113.347984] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3113.349665] usb 3-6: reset full-speed USB device number 2 using xhci_hcd [ 3113.352541] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 3113.352543] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3113.369968] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 3113.369971] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3113.378694] ata2.00: configured for UDMA/133 [ 3113.625850] usb 3-7: reset full-speed USB device number 3 using xhci_hcd [ 3113.901858] usb 3-12: reset high-speed USB device number 5 using xhci_hcd [ 3114.108867] acpi LNXPOWER:02: Turning OFF [ 3114.109340] OOM killer enabled. [ 3114.109342] Restarting tasks ... done. [ 3114.137282] PM: suspend exit [ 3115.557778] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3115.695769] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 3115.695777] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3115.695781] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 3115.725259] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 3115.725267] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3115.725271] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 3115.726967] ata1.00: configured for UDMA/133 [ 3115.745655] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3116.062083] ata6.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 3116.062092] ata6.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3116.062096] ata6.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 3116.070297] ata6.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 3116.070304] ata6.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3116.070308] ata6.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 3116.074670] ata6.00: configured for UDMA/133 [ 3116.306342] e1000e: enp0s25 NIC Link is Down [ 3119.084974] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 3119.084983] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO [ 3119.085058] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready