[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 23:41:49 UTC 2008 (Ubuntu 2.6.24-19.36-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable) [ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6e0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f6e0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 1142MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f7b50 [ 0.000000] Entering add_active_range(0, 0, 521936) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 521936 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 521936 [ 0.000000] On node 0 totalpages: 521936 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2285 pages used for memmap [ 0.000000] HighMem zone: 290275 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F7B20 checksum 0 [ 0.000000] ACPI: RSDP 000F7B20, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT 7F6D58E6, 007C (r1 PTLTD XSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 7F6DCDBE, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1) [ 0.000000] ACPI: DSDT 7F6D696E, 63DC (r2 INTEL CRESTLNE 6040000 INTL 20050624) [ 0.000000] ACPI: FACS 7F6DFFC0, 0040 [ 0.000000] ACPI: HPET 7F6DCEB2, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 7F6DCEEA, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: TCPA 7F6DCF26, 0032 (r1 Intel CRESTLN 6040000 5A52) [ 0.000000] ACPI: TMOR 7F6DCF58, 0026 (r1 PTLTD 6040000 PTL 3) [ 0.000000] ACPI: APIC 7F6DCF7E, 005A (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 7F6DCFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SSDT 7F6D6691, 02DD (r1 SataRe SataAhci 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6D60A7, 05EA (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6D5E48, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6D5962, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 7:6 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517859 [ 0.000000] Kernel command line: root=UUID=00bbc910-61ac-4d4b-8618-2fe307c9aa5f ro quiet splash xforcevesa [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1729.224 MHz processor. [ 13.364011] Console: colour VGA+ 80x25 [ 13.364014] console [tty0] enabled [ 13.364372] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 13.364674] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 13.457874] Memory: 2057892k/2087744k available (2177k kernel code, 28612k reserved, 1006k data, 368k init, 1170240k highmem) [ 13.457881] virtual kernel memory layout: [ 13.457882] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 13.457883] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 13.457884] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 13.457885] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 13.457886] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 13.457887] .data : 0xc0320474 - 0xc041bdc4 (1006 kB) [ 13.457888] .text : 0xc0100000 - 0xc0320474 (2177 kB) [ 13.457891] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 13.457939] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 13.458088] hpet clockevent registered [ 13.538070] Calibrating delay using timer specific routine.. 3462.30 BogoMIPS (lpj=6924610) [ 13.538094] Security Framework initialized [ 13.538101] SELinux: Disabled at boot. [ 13.538116] AppArmor: AppArmor initialized [ 13.538120] Failure registering capabilities with primary security module. [ 13.538128] Mount-cache hash table entries: 512 [ 13.538264] Initializing cgroup subsys ns [ 13.538270] Initializing cgroup subsys cpuacct [ 13.538281] CPU: After generic identify, caps: afebfbff 20100000 00000000 00000000 0000e31d 00000000 00000001 00000000 [ 13.538288] monitor/mwait feature present. [ 13.538290] using mwait in idle threads. [ 13.538294] CPU: L1 I cache: 32K, L1 D cache: 32K [ 13.538296] CPU: L2 cache: 1024K [ 13.538299] CPU: After all inits, caps: afebfbff 20100000 00000000 00003940 0000e31d 00000000 00000001 00000000 [ 13.538309] Compat vDSO mapped to ffffe000. [ 13.538323] Checking 'hlt' instruction... OK. [ 13.554479] SMP alternatives: switching to UP code [ 13.556087] Freeing SMP alternatives: 11k freed [ 13.556186] Early unpacking initramfs... done [ 13.888597] ACPI: Core revision 20070126 [ 13.888644] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 13.965488] CPU0: Intel(R) Celeron(R) CPU 530 @ 1.73GHz stepping 01 [ 13.965512] Total of 1 processors activated (3462.30 BogoMIPS). [ 13.965688] ENABLING IO-APIC IRQs [ 13.965875] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 14.109929] Brought up 1 CPUs [ 14.109950] CPU0 attaching sched-domain: [ 14.109952] domain 0: span 01 [ 14.109954] groups: 01 [ 14.110100] net_namespace: 64 bytes [ 14.110109] Booting paravirtualized kernel on bare hardware [ 14.110549] Time: 20:06:55 Date: 07/16/08 [ 14.110571] NET: Registered protocol family 16 [ 14.110748] EISA bus registered [ 14.110753] ACPI: bus type pci registered [ 14.111164] PCI: PCI BIOS revision 3.00 entry at 0xfddb1, last bus=4 [ 14.111166] PCI: Using configuration type 1 [ 14.111178] Setting up standard PCI resources [ 14.113364] ACPI: EC: Look up EC in DSDT [ 14.115219] ACPI: BIOS _OSI(Linux) query ignored [ 14.115222] ACPI: DMI System Vendor: transtec AG [ 14.115223] ACPI: DMI Product Name: Crestline & ICH8M Chipset [ 14.115225] ACPI: DMI Product Version: Not Applicable [ 14.115226] ACPI: DMI Board Name: SANTA ROSA CRB [ 14.115228] ACPI: DMI BIOS Vendor: Phoenix Technologies LTD [ 14.115229] ACPI: DMI BIOS Date: 01/03/2008 [ 14.115231] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org [ 14.115232] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org [ 14.115942] ACPI: Interpreter enabled [ 14.115945] ACPI: (supports S0 S3 S4 S5) [ 14.115958] ACPI: Using IOAPIC for interrupt routing [ 14.120037] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 14.121038] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 14.121042] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 14.122372] PCI: Transparent bridge - 0000:00:1e.0 [ 14.122410] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 14.122766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 14.122898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 14.123034] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 14.134025] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 14.134125] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 14.134222] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 14.134318] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 14.134414] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 14.134510] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 14.134605] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 14.134700] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 14.134820] ACPI: Power Resource [FN10] (on) [ 14.134869] Linux Plug and Play Support v0.97 (c) Adam Belay [ 14.134899] pnp: PnP ACPI init [ 14.134907] ACPI: bus type pnp registered [ 14.136355] pnp: PnP ACPI: found 8 devices [ 14.136357] ACPI: ACPI bus type pnp unregistered [ 14.136362] PnPBIOS: Disabled by ACPI PNP [ 14.136568] PCI: Using ACPI for IRQ routing [ 14.136570] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 14.193870] NET: Registered protocol family 8 [ 14.193872] NET: Registered protocol family 20 [ 14.193904] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 14.193909] hpet0: 3 64-bit timers, 14318180 Hz [ 14.194944] AppArmor: AppArmor Filesystem Enabled [ 14.197862] Time: tsc clocksource has been installed. [ 14.197877] Switched to high resolution mode on CPU 0 [ 14.205863] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 14.205866] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 14.205869] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 14.205872] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 14.205874] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 14.205877] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 14.205879] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved [ 14.205882] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 14.205889] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved [ 14.205895] system 00:06: ioport range 0x680-0x69f has been reserved [ 14.205898] system 00:06: ioport range 0x800-0x80f has been reserved [ 14.205900] system 00:06: ioport range 0x1000-0x107f has been reserved [ 14.205902] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 14.205905] system 00:06: ioport range 0x1640-0x164f has been reserved [ 14.205908] system 00:06: ioport range 0xfe00-0xfe00 has been reserved [ 14.236301] PCI: Bridge: 0000:00:1c.0 [ 14.236303] IO window: disabled. [ 14.236308] MEM window: disabled. [ 14.236313] PREFETCH window: disabled. [ 14.236319] PCI: Bridge: 0000:00:1c.5 [ 14.236321] IO window: 2000-2fff [ 14.236327] MEM window: f0200000-f02fffff [ 14.236332] PREFETCH window: 88000000-880fffff [ 14.236338] PCI: Bridge: 0000:00:1e.0 [ 14.236339] IO window: disabled. [ 14.236346] MEM window: f0300000-f03fffff [ 14.236350] PREFETCH window: disabled. [ 14.236386] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 14.236393] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 14.236418] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 17 [ 14.236423] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 14.236438] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 14.236449] NET: Registered protocol family 2 [ 14.273869] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 14.274105] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 14.274638] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 14.275001] TCP: Hash tables configured (established 131072 bind 65536) [ 14.275004] TCP reno registered [ 14.285966] checking if image is initramfs... it is [ 14.933576] Freeing initrd memory: 7328k freed [ 14.933763] Simple Boot Flag at 0x36 set to 0x1 [ 14.934226] audit: initializing netlink socket (disabled) [ 14.934240] audit(1216238815.300:1): initialized [ 14.934431] highmem bounce pool size: 64 pages [ 14.936248] VFS: Disk quotas dquot_6.5.1 [ 14.936319] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 14.936447] io scheduler noop registered [ 14.936449] io scheduler anticipatory registered [ 14.936451] io scheduler deadline registered [ 14.936461] io scheduler cfq registered (default) [ 14.936474] Boot video device is 0000:00:02.0 [ 14.936700] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 14.936765] assign_interrupt_mode Found MSI capability [ 14.936819] Allocate Port Service[0000:00:1c.0:pcie00] [ 14.936851] Allocate Port Service[0000:00:1c.0:pcie02] [ 14.936958] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 14.937023] assign_interrupt_mode Found MSI capability [ 14.937074] Allocate Port Service[0000:00:1c.5:pcie00] [ 14.937105] Allocate Port Service[0000:00:1c.5:pcie02] [ 14.937349] isapnp: Scanning for PnP cards... [ 15.291868] isapnp: No Plug & Play device found [ 15.316080] Real Time Clock Driver v1.12ac [ 15.316291] hpet_resources: 0xfed00000 is busy [ 15.316312] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 15.317401] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 15.317462] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 15.317601] PNP: No PS/2 controller found. Probing ports directly. [ 15.324578] i8042.c: Detected active multiplexing controller, rev 1.1. [ 15.325226] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 15.325230] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 15.325232] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 15.325234] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 15.325236] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 15.325693] mice: PS/2 mouse device common for all mice [ 15.325801] EISA: Probing bus 0 at eisa.0 [ 15.325808] Cannot allocate resource for EISA slot 1 [ 15.325810] Cannot allocate resource for EISA slot 2 [ 15.325837] EISA: Detected 0 cards. [ 15.325839] cpuidle: using governor ladder [ 15.325841] cpuidle: using governor menu [ 15.325920] NET: Registered protocol family 1 [ 15.325946] Using IPI No-Shortcut mode [ 15.325973] registered taskstats version 1 [ 15.326070] Magic number: 0:395:144 [ 15.326148] hash matches device device:15 [ 15.326155] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 15.326156] EDD information not available. [ 15.326335] Freeing unused kernel memory: 368k freed [ 15.361465] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 16.552543] fuse init (API version 7.9) [ 16.565885] ACPI: Fan [FN1] (on) [ 16.571751] Monitor-Mwait will be used to enter C-1 state [ 16.571755] Monitor-Mwait will be used to enter C-2 state [ 16.571846] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 16.571850] ACPI: Processor [CPU0] (supports 8 throttling states) [ 16.571864] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 16.577767] ACPI: Thermal Zone [THRM] (81 C) [ 17.187243] usbcore: registered new interface driver usbfs [ 17.187268] usbcore: registered new interface driver hub [ 17.191438] usbcore: registered new device driver usb [ 17.197998] USB Universal Host Controller Interface driver v3.0 [ 17.198055] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 17.198069] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 17.198073] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 17.198330] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 17.198369] uhci_hcd 0000:00:1a.0: irq 17, io base 0x00001820 [ 17.198520] usb usb1: configuration #1 chosen from 1 choice [ 17.198546] hub 1-0:1.0: USB hub found [ 17.198550] hub 1-0:1.0: 2 ports detected [ 17.300916] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 18 [ 17.300929] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 17.300936] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 17.300961] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 17.301002] uhci_hcd 0000:00:1a.1: irq 18, io base 0x00001840 [ 17.301128] usb usb2: configuration #1 chosen from 1 choice [ 17.301158] hub 2-0:1.0: USB hub found [ 17.301163] hub 2-0:1.0: 2 ports detected [ 17.365010] SCSI subsystem initialized [ 17.404871] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 17.404887] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 17.404892] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 17.404916] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 17.404956] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001860 [ 17.405072] usb usb3: configuration #1 chosen from 1 choice [ 17.405099] hub 3-0:1.0: USB hub found [ 17.405103] hub 3-0:1.0: 2 ports detected [ 17.448751] libata version 3.00 loaded. [ 17.508839] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 [ 17.508852] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 17.508859] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 17.508885] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 17.508925] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001880 [ 17.509048] usb usb4: configuration #1 chosen from 1 choice [ 17.509075] hub 4-0:1.0: USB hub found [ 17.509080] hub 4-0:1.0: 2 ports detected [ 17.612817] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21 [ 17.612830] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 17.612837] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 17.612862] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 17.612900] uhci_hcd 0000:00:1d.2: irq 21, io base 0x000018a0 [ 17.613028] usb usb5: configuration #1 chosen from 1 choice [ 17.613055] hub 5-0:1.0: USB hub found [ 17.613060] hub 5-0:1.0: 2 ports detected [ 17.716897] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 21 [ 17.716915] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 17.716919] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 17.716947] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 17.720856] ehci_hcd 0000:00:1a.7: debug port 1 [ 17.720863] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 17.720872] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xf0604800 [ 17.736641] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 17.736793] usb usb6: configuration #1 chosen from 1 choice [ 17.736826] hub 6-0:1.0: USB hub found [ 17.736832] hub 6-0:1.0: 4 ports detected [ 17.840744] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 [ 17.840763] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 17.840767] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 17.840792] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 17.844721] ehci_hcd 0000:00:1d.7: debug port 1 [ 17.844727] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 17.844734] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf0604c00 [ 17.860614] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 17.860764] usb usb7: configuration #1 chosen from 1 choice [ 17.860790] hub 7-0:1.0: USB hub found [ 17.860796] hub 7-0:1.0: 6 ports detected [ 17.964786] ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 18.016633] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[f0300000-f03007ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 18.031057] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 20 [ 18.031101] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 18.031118] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 18.033435] ahci 0000:00:1f.2: version 3.0 [ 18.033467] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20 [ 19.030371] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 19.036224] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 19.036228] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 19.036236] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 19.036476] scsi0 : ahci [ 19.036755] scsi1 : ahci [ 19.036907] scsi2 : ahci [ 19.037005] ata1: SATA max UDMA/133 abar m2048@0xf0604000 port 0xf0604100 irq 221 [ 19.037008] ata2: SATA max UDMA/133 abar m2048@0xf0604000 port 0xf0604180 irq 221 [ 19.037012] ata3: SATA max UDMA/133 abar m2048@0xf0604000 port 0xf0604200 irq 221 [ 19.189569] usb 3-1: configuration #1 chosen from 1 choice [ 19.300209] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0040ca014600010b] [ 19.432049] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 19.512041] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 19.513972] ata1.00: ATA-7: ST980811AS, 3.ALC, max UDMA/133 [ 19.513974] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 19.516022] ata1.00: configured for UDMA/133 [ 19.607437] usb 2-2: configuration #1 chosen from 1 choice [ 19.827919] ata2: SATA link down (SStatus 0 SControl 300) [ 19.847906] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 20.036312] usb 5-1: configuration #1 chosen from 1 choice [ 20.039427] usbcore: registered new interface driver hiddev [ 20.053442] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input2 [ 20.063884] input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-1 [ 20.083290] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.1/input/input3 [ 20.091843] input,hidraw1: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-1 [ 20.104382] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0/input/input4 [ 20.115857] input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.1-2 [ 20.115877] usbcore: registered new interface driver usbhid [ 20.115880] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 20.139829] ata3: SATA link down (SStatus 0 SControl 300) [ 20.139981] scsi 0:0:0:0: Direct-Access ATA ST980811AS 3.AL PQ: 0 ANSI: 5 [ 20.155876] ata_piix 0000:00:1f.1: version 2.12 [ 20.155901] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 20 [ 20.155946] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 20.157173] scsi3 : ata_piix [ 20.161623] scsi4 : ata_piix [ 20.162256] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 20.162260] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 20.171268] Driver 'sd' needs updating - please use bus_type methods [ 20.171361] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 20.171375] sd 0:0:0:0: [sda] Write Protect is off [ 20.171377] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.171395] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.171442] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 20.171454] sd 0:0:0:0: [sda] Write Protect is off [ 20.171456] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.171472] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.171475] sda: sda1 sda2 < sda5 > [ 20.249594] sd 0:0:0:0: [sda] Attached SCSI disk [ 20.256039] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 20.480399] ata4.00: ATAPI: MATSHITADVD-RAM UJ-875S, 1.00, max UDMA/33 [ 20.522390] Attempting manual resume [ 20.522393] swsusp: Resume From Partition 8:5 [ 20.522394] PM: Checking swsusp image. [ 20.522531] PM: Resume from disk failed. [ 20.564475] kjournald starting. Commit interval 5 seconds [ 20.564488] EXT3-fs: mounted filesystem with ordered data mode. [ 20.652346] ata4.00: configured for UDMA/33 [ 20.821304] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-875S 1.00 PQ: 0 ANSI: 5 [ 20.821389] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 32.763450] Linux agpgart interface v0.102 [ 32.991375] agpgart: Detected an Intel 965GM Chipset. [ 32.991663] agpgart: Detected 7676K stolen memory. [ 33.005344] agpgart: AGP aperture is 256M @ 0xd0000000 [ 33.060419] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 33.123351] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 33.207715] iTCO_vendor_support: vendor-support=0 [ 33.279606] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 33.279694] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 33.279734] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 33.415250] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 33.500581] input: Power Button (FF) as /devices/virtual/input/input6 [ 33.518571] ACPI: Power Button (FF) [PWRF] [ 33.518677] input: Power Button (CM) as /devices/virtual/input/input7 [ 33.529374] ACPI: Power Button (CM) [PWRB] [ 34.532544] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 34.562803] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 35.131812] Driver 'sr' needs updating - please use bus_type methods [ 35.138580] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy [ 35.138585] Uniform CD-ROM driver Revision: 3.20 [ 35.138639] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 35.185904] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 35.185934] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 35.186062] sky2 0000:03:00.0: v1.20 addr 0xf0200000 irq 16 Yukon-EC Ultra (0xb4) rev 3 [ 35.187401] sky2 eth0: addr 00:14:0b:44:1f:1c [ 35.566485] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 35.566515] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 35.600149] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS... [ 36.270173] Bluetooth: Core ver 2.11 [ 36.282265] NET: Registered protocol family 31 [ 36.282268] Bluetooth: HCI device and connection manager initialized [ 36.282272] Bluetooth: HCI socket layer initialized [ 36.330346] Bluetooth: HCI USB driver ver 2.9 [ 36.332351] usbcore: registered new interface driver hci_usb [ 37.674255] lp: driver loaded but no devices found [ 37.875438] Adding 3229024k swap on /dev/sda5. Priority:-1 extents:1 across:3229024k [ 38.473774] EXT3 FS on sda1, internal journal [ 39.835622] ip_tables: (C) 2000-2006 Netfilter Core Team [ 41.663393] ACPI: ACPI Dock Station Driver [ 42.983865] NET: Registered protocol family 10 [ 42.984247] lo: Disabled Privacy Extensions [ 45.383457] apm: BIOS not found. [ 45.652468] ppdev: user-space parallel port driver [ 46.191255] audit(1216238847.700:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5136 profile="/usr/sbin/cupsd" namespace="default" [ 47.597534] sky2 eth0: enabling interface [ 47.602504] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 47.762308] Bluetooth: L2CAP ver 2.9 [ 47.762313] Bluetooth: L2CAP socket layer initialized [ 47.933447] Bluetooth: RFCOMM socket layer initialized [ 47.933463] Bluetooth: RFCOMM TTY layer initialized [ 47.933465] Bluetooth: RFCOMM ver 1.8 [ 49.399819] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 49.401390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 49.909798] mtrr: no more MTRRs available [ 52.103966] NET: Registered protocol family 17 [ 63.990261] eth0: no IPv6 routers present [ 117.476340] UDF-fs: Partition marked readonly; forcing readonly mount [ 117.516884] UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'BOCKLERFEST_08', timestamp 2008/07/06 21:18 (1078) [ 1085.558509] mtrr: no more MTRRs available [ 1185.112498] [drm] Initialized drm 1.1.0 20060810 [ 1185.115374] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 1185.115383] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 1185.115452] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 1866.294323] mtrr: no more MTRRs available [ 1932.497201] mtrr: no more MTRRs available [ 2067.586714] mtrr: no more MTRRs available [ 2166.759013] mtrr: no more MTRRs available