[ 0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet nosplash -- [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 262128) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7CC0 checksum 0 [ 0.000000] ACPI: RSDP 000F7CC0, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 3FFF3000, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 3FFF30C0, 62CE (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 3FFF0000, 0040 [ 0.000000] ACPI: MCFG 3FFF9440, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 3FFF93C0, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003fff0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 262128) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000003fff0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 262128 [ 0.000000] On node 0 totalpages: 262031 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1124 pages reserved [ 0.000000] DMA zone: 2819 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3527 pages used for memmap [ 0.000000] DMA32 zone: 254505 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 257324 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet nosplash -- [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 34.988439] time.c: Detected 1809.293 MHz processor. [ 34.989871] Console: colour VGA+ 80x25 [ 34.989889] Checking aperture... [ 34.989893] CPU 0: aperture @ 4b78000000 size 32 MB [ 34.989895] Aperture too small (32 MB) [ 34.994743] No AGP bridge found [ 35.006148] Memory: 1021432k/1048512k available (2274k kernel code, 26692k reserved, 1181k data, 296k init) [ 35.006204] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 35.082282] Calibrating delay using timer specific routine.. 3620.78 BogoMIPS (lpj=7241564) [ 35.082317] Security Framework v1.0.0 initialized [ 35.082325] SELinux: Disabled at boot. [ 35.082425] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 35.083222] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 35.083590] Mount-cache hash table entries: 256 [ 35.083738] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 35.083741] CPU: L2 Cache: 512K (64 bytes/line) [ 35.083745] CPU 0/0 -> Node 0 [ 35.083763] SMP alternatives: switching to UP code [ 35.083936] Freeing SMP alternatives: 24k freed [ 35.084318] Early unpacking initramfs... done [ 35.425688] ACPI: Core revision 20070126 [ 35.425763] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 35.469656] Using local APIC timer interrupts. [ 35.524834] result 12564543 [ 35.524836] Detected 12.564 MHz APIC timer. [ 35.525579] Brought up 1 CPUs [ 35.525779] NET: Registered protocol family 16 [ 35.525861] ACPI: bus type pci registered [ 35.525867] PCI: Using configuration type 1 [ 35.526989] ACPI: EC: Look up EC in DSDT [ 35.533830] ACPI: Interpreter enabled [ 35.533834] ACPI: (supports S0 S1 S3 S4 S5) [ 35.533852] ACPI: Using IOAPIC for interrupt routing [ 35.543813] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 35.543824] PCI: Probing PCI hardware (bus 00) [ 35.544239] PCI: Transparent bridge - 0000:00:09.0 [ 35.544497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 35.544796] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 35.616423] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 35.616611] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 *12 14 15) [ 35.616796] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 35.616980] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 35.617165] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 35.617351] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 *12 14 15) [ 35.617542] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 35.617728] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 35.617913] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 35.618097] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 35.618283] ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 35.618470] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 35.618657] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 35.618854] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 35.619050] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 35.619243] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 35.619380] ACPI: PCI Interrupt Link [APC1] (IRQs *16) [ 35.619512] ACPI: PCI Interrupt Link [APC2] (IRQs *17) [ 35.619644] ACPI: PCI Interrupt Link [APC3] (IRQs *18) [ 35.619776] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled. [ 35.619908] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 35.620116] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 35.620319] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 35.620521] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 35.620722] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 [ 35.620924] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 35.621126] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 35.621328] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 35.621535] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 35.621745] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 35.621955] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 35.622164] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 35.622267] Linux Plug and Play Support v0.97 (c) Adam Belay [ 35.622284] pnp: PnP ACPI init [ 35.622293] ACPI: bus type pnp registered [ 35.627392] pnp: PnP ACPI: found 14 devices [ 35.627394] ACPI: ACPI bus type pnp unregistered [ 35.627451] PCI: Using ACPI for IRQ routing [ 35.627455] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 35.627527] NET: Registered protocol family 8 [ 35.627529] NET: Registered protocol family 20 [ 35.627646] pnp: 00:00: ioport range 0x4000-0x407f has been reserved [ 35.627650] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved [ 35.627653] pnp: 00:00: ioport range 0x4400-0x447f has been reserved [ 35.627656] pnp: 00:00: ioport range 0x4480-0x44ff has been reserved [ 35.627659] pnp: 00:00: ioport range 0x4800-0x487f has been reserved [ 35.627662] pnp: 00:00: ioport range 0x4880-0x48ff has been reserved [ 35.627675] pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved [ 35.627680] pnp: 00:0d: iomem range 0xf0000-0xf3fff could not be reserved [ 35.627683] pnp: 00:0d: iomem range 0xf4000-0xf7fff could not be reserved [ 35.627686] pnp: 00:0d: iomem range 0xf8000-0xfbfff could not be reserved [ 35.627690] pnp: 00:0d: iomem range 0xfc000-0xfffff could not be reserved [ 35.627959] PCI: Bridge: 0000:00:09.0 [ 35.627962] IO window: a000-afff [ 35.627965] MEM window: d0000000-d1ffffff [ 35.627968] PREFETCH window: 50000000-500fffff [ 35.627971] PCI: Bridge: 0000:00:0b.0 [ 35.627973] IO window: disabled. [ 35.627975] MEM window: disabled. [ 35.627977] PREFETCH window: disabled. [ 35.627979] PCI: Bridge: 0000:00:0c.0 [ 35.627981] IO window: disabled. [ 35.627983] MEM window: disabled. [ 35.627985] PREFETCH window: disabled. [ 35.627987] PCI: Bridge: 0000:00:0d.0 [ 35.627989] IO window: disabled. [ 35.627991] MEM window: disabled. [ 35.627993] PREFETCH window: disabled. [ 35.627995] PCI: Bridge: 0000:00:0e.0 [ 35.627998] IO window: 9000-9fff [ 35.628001] MEM window: b0000000-cfffffff [ 35.628004] PREFETCH window: 50100000-501fffff [ 35.628011] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 35.628018] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 35.628024] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 35.628029] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 35.628035] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 35.628088] NET: Registered protocol family 2 [ 35.629372] Time: tsc clocksource has been installed. [ 35.661374] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 35.661785] TCP established hash table entries: 131072 (order: 9, 3145728 bytes) [ 35.664114] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 35.664871] TCP: Hash tables configured (established 131072 bind 65536) [ 35.664875] TCP reno registered [ 35.673424] checking if image is initramfs... it is [ 36.338564] Freeing initrd memory: 7730k freed [ 36.344547] audit: initializing netlink socket (disabled) [ 36.344561] audit(1196507582.316:1): initialized [ 36.346451] VFS: Disk quotas dquot_6.5.1 [ 36.346507] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 36.346597] io scheduler noop registered [ 36.346600] io scheduler anticipatory registered [ 36.346601] io scheduler deadline registered [ 36.346691] io scheduler cfq registered (default) [ 36.364338] PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 [ 36.364348] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 36.364354] PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 [ 36.364361] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 36.364366] PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 [ 36.364373] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 36.364378] PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 [ 36.364384] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 36.364392] Boot video device is 0000:01:00.0 [ 36.364527] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 36.364543] assign_interrupt_mode Found MSI capability [ 36.364547] Allocate Port Service[0000:00:0b.0:pcie00] [ 36.364603] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 36.364618] assign_interrupt_mode Found MSI capability [ 36.364621] Allocate Port Service[0000:00:0c.0:pcie00] [ 36.364670] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 36.364686] assign_interrupt_mode Found MSI capability [ 36.364688] Allocate Port Service[0000:00:0d.0:pcie00] [ 36.364735] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 36.364750] assign_interrupt_mode Found MSI capability [ 36.364752] Allocate Port Service[0000:00:0e.0:pcie00] [ 36.387567] Real Time Clock Driver v1.12ac [ 36.387664] Linux agpgart interface v0.102 (c) Dave Jones [ 36.387667] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 36.387757] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 36.388368] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 36.389018] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 36.389219] input: Macintosh mouse button emulation as /class/input/input0 [ 36.389282] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 36.389285] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 36.644015] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 36.644151] mice: PS/2 mouse device common for all mice [ 36.644275] TCP cubic registered [ 36.644337] NET: Registered protocol family 1 [ 36.644552] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 36.644561] Freeing unused kernel memory: 296k freed [ 36.687613] input: AT Translated Set 2 keyboard as /class/input/input1 [ 36.812652] AppArmor: AppArmor initialized<5>audit(1196507582.784:2): type=1505 info="AppArmor initialized" pid=1221 [ 36.820990] fuse init (API version 7.8) [ 36.826622] Failure registering capabilities with primary security module. [ 36.843620] ACPI: Fan [FAN] (on) [ 36.848793] ACPI: Processor [CPU0] (supports 8 throttling states) [ 36.850051] ACPI: Thermal Zone [THRM] (40 C) [ 37.452268] usbcore: registered new interface driver usbfs [ 37.452297] usbcore: registered new interface driver hub [ 37.452318] usbcore: registered new device driver usb [ 37.453037] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 37.453448] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 37.453455] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 [ 37.453553] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 37.453561] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 37.453706] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 37.453723] ohci_hcd 0000:00:02.0: irq 23, io mem 0xd2004000 [ 37.483648] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 37.483655] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 37.498687] SCSI subsystem initialized [ 37.504022] libata version 2.21 loaded. [ 37.536280] usb usb1: configuration #1 chosen from 1 choice [ 37.536308] hub 1-0:1.0: USB hub found [ 37.536318] hub 1-0:1.0: 10 ports detected [ 37.547569] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 37.642330] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 [ 37.642351] NFORCE-CK804: chipset revision 162 [ 37.642353] NFORCE-CK804: not 100% native mode: will probe irqs later [ 37.642357] NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround. [ 37.642361] NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller [ 37.642370] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 37.642378] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA [ 37.642386] Probing IDE interface ide0... [ 37.727602] Floppy drive(s): fd0 is 1.44M [ 37.771434] FDC 0 is a post-1991 82077 [ 37.949412] usb 1-2: new full speed USB device using ohci_hcd and address 2 [ 38.017283] end_request: I/O error, dev fd0, sector 0 [ 38.172145] usb 1-2: configuration #1 chosen from 1 choice [ 38.384722] hda: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive [ 38.480485] usb 1-3: new low speed USB device using ohci_hcd and address 3 [ 38.664242] hdb: SAMSUNG SP1613N, ATA DISK drive [ 38.686240] usb 1-3: configuration #1 chosen from 1 choice [ 38.701592] usbcore: registered new interface driver hiddev [ 38.708471] input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/input2 [ 38.708614] input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:02.0-3 [ 38.708631] usbcore: registered new interface driver usbhid [ 38.708634] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 38.721017] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 38.726658] Probing IDE interface ide1... [ 39.063493] end_request: I/O error, dev fd0, sector 0 [ 39.299173] sata_nv 0000:00:07.0: version 3.4 [ 39.299659] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 [ 39.299667] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 22 [ 39.299671] sata_nv 0000:00:07.0: Using ADMA mode [ 39.299835] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 39.299998] scsi0 : sata_nv [ 39.300046] scsi1 : sata_nv [ 39.300121] ata1: SATA max UDMA/133 cmd 0xffffc200005e4480 ctl 0xffffc200005e44a0 bmdma 0x000000000001d800 irq 22 [ 39.300126] ata2: SATA max UDMA/133 cmd 0xffffc200005e4580 ctl 0xffffc200005e45a0 bmdma 0x000000000001d808 irq 22 [ 39.318285] hda: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 39.318295] Uniform CD-ROM driver Revision: 3.20 [ 39.349308] hdb: max request size: 512KiB [ 39.350674] hdb: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100) [ 39.352235] hdb: cache flushes supported [ 39.352275] hdb: hdb1 hdb2 hdb3 < hdb5 > [ 39.614545] ata1: SATA link down (SStatus 0 SControl 300) [ 39.926009] ata2: SATA link down (SStatus 0 SControl 300) [ 39.926486] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21 [ 39.926493] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 21 [ 39.926499] sata_nv 0000:00:08.0: Using ADMA mode [ 39.926640] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 39.926733] scsi2 : sata_nv [ 39.926794] scsi3 : sata_nv [ 39.926866] ata3: SATA max UDMA/133 cmd 0xffffc200005e6480 ctl 0xffffc200005e64a0 bmdma 0x000000000001c400 irq 21 [ 39.926871] ata4: SATA max UDMA/133 cmd 0xffffc200005e6580 ctl 0xffffc200005e65a0 bmdma 0x000000000001c408 irq 21 [ 40.109702] end_request: I/O error, dev fd0, sector 0 [ 40.397229] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 40.405360] ata3.00: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7 [ 40.405363] ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 40.441292] ata3.00: configured for UDMA/133 [ 40.570563] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 40.609415] ISO 9660 Extensions: RRIP_1991A [ 40.908349] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 40.909301] Registering unionfs 1.4 [ 40.909304] unionfs: debugging is not enabled [ 40.916498] ata4.00: ATA-7: SAMSUNG SP0812C, SU100-34, max UDMA7 [ 40.916503] ata4.00: 156368016 sectors, multi 1: LBA48 [ 40.925698] loop: module loaded [ 40.928478] ata4.00: configured for UDMA/133 [ 40.928598] scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 [ 40.928606] ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 40.929006] scsi 3:0:0:0: Direct-Access ATA SAMSUNG SP0812C SU10 PQ: 0 ANSI: 5 [ 40.929012] ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 40.929535] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 [ 40.929542] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 20 [ 40.929640] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 40.929647] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 40.929700] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 40.929729] ehci_hcd 0000:00:02.1: debug port 1 [ 40.929732] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 40.929743] ehci_hcd 0000:00:02.1: irq 20, io mem 0xd2005000 [ 40.929749] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 40.929780] usb 1-2: USB disconnect, address 2 [ 40.930014] usb usb2: configuration #1 chosen from 1 choice [ 40.930039] hub 2-0:1.0: USB hub found [ 40.930045] hub 2-0:1.0: 10 ports detected [ 40.940270] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 40.947188] sd 2:0:0:0: [sda] Write Protect is off [ 40.947194] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 40.947237] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 40.947306] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 40.947314] sd 2:0:0:0: [sda] Write Protect is off [ 40.947316] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 40.947327] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 40.947332] sda: sda1 [ 40.956205] sd 2:0:0:0: [sda] Attached SCSI disk [ 40.956395] sd 3:0:0:0: [sdb] 156368016 512-byte hardware sectors (80060 MB) [ 40.956405] sd 3:0:0:0: [sdb] Write Protect is off [ 40.956408] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 40.956420] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 40.956463] sd 3:0:0:0: [sdb] 156368016 512-byte hardware sectors (80060 MB) [ 40.956471] sd 3:0:0:0: [sdb] Write Protect is off [ 40.956473] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 40.956484] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 40.956487] sdb: sdb1 sdb2 < sdb5 > [ 40.985350] sd 3:0:0:0: [sdb] Attached SCSI disk [ 40.992516] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 40.992683] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 41.036745] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 41.036751] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23 [ 41.036757] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 41.036767] forcedeth: using HIGHDMA [ 41.060088] usb 1-3: USB disconnect, address 3 [ 41.559481] eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0 [ 41.559997] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 41.560005] ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 [ 41.610119] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[d1008000-d10087ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 41.610433] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 41.610438] ACPI: PCI Interrupt 0000:05:0c.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 [ 41.610600] skge 1.11 addr 0xd1000000 irq 17 chip Yukon-Lite rev 9 [ 41.610751] skge eth1: addr 00:11:d8:94:92:bf [ 41.918620] usb 1-2: new full speed USB device using ohci_hcd and address 4 [ 41.919882] squashfs: version 3.2-UBUNTU (2007/07/26) Phillip Lougher [ 42.126327] usb 1-2: configuration #1 chosen from 1 choice [ 42.433760] usb 1-3: new low speed USB device using ohci_hcd and address 5 [ 42.640472] usb 1-3: configuration #1 chosen from 1 choice [ 42.651540] input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/input3 [ 42.651560] input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:02.0-3 [ 42.881043] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000012dace] [ 113.651637] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 [ 113.651671] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 [ 114.102291] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 115.059891] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 115.464993] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x323A [ 115.465015] usbcore: registered new interface driver usblp [ 115.465019] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 115.898150] input: PC Speaker as /class/input/input4 [ 116.973845] parport_pc 00:09: reported by Plug and Play ACPI [ 116.973902] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 118.345660] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 [ 118.345667] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 22 [ 118.345780] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 118.667163] intel8x0_measure_ac97_clock: measured 54702 usecs [ 118.667167] intel8x0: clocking to 46888 [ 120.455418] Adding 3012148k swap on /dev/hdb5. Priority:-1 extents:1 across:3012148k [ 120.456828] Adding 3012148k swap on /dev/sdb5. Priority:-2 extents:1 across:3012148k [ 124.243277] No dock devices found. [ 124.326718] input: Power Button (FF) as /class/input/input5 [ 124.331093] ACPI: Power Button (FF) [PWRF] [ 124.377448] input: Power Button (CM) as /class/input/input6 [ 124.381810] ACPI: Power Button (CM) [PWRB] [ 125.305654] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (version 2.00.00) [ 125.305693] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 [ 125.305696] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 [ 128.475796] lp0: using parport0 (interrupt-driven). [ 128.534155] ppdev: user-space parallel port driver [ 132.487690] Marking TSC unstable due to cpufreq changes [ 132.487831] Time: acpi_pm clocksource has been installed. [ 132.516239] Failure registering capabilities with primary security module. [ 132.850489] avahi-daemon[8028]: segfault at 0000000000000000 rip 000000000040705a rsp 00007fff8f18b980 error 4 [ 147.968839] skge eth1: enabling interface [ 152.104326] Bluetooth: Core ver 2.11 [ 152.104413] NET: Registered protocol family 31 [ 152.104416] Bluetooth: HCI device and connection manager initialized [ 152.104419] Bluetooth: HCI socket layer initialized [ 152.308080] NET: Registered protocol family 17 [ 152.464196] Bluetooth: L2CAP ver 2.8 [ 152.464201] Bluetooth: L2CAP socket layer initialized [ 153.109066] Bluetooth: RFCOMM socket layer initialized [ 153.109133] Bluetooth: RFCOMM TTY layer initialized [ 153.109136] Bluetooth: RFCOMM ver 1.8 [ 157.801582] NET: Registered protocol family 10 [ 157.801712] lo: Disabled Privacy Extensions [ 157.801964] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 164.128394] eth0: no IPv6 routers present