__ __ _____ ____ _ _ \ \/ /___ _ __ |___ / |___ \ / | _ __ ___/ | _ __ _ __ ___ \ // _ \ '_ \ |_ \ __) | | |__| '__/ __| |__| '_ \| '__/ _ \ / \ __/ | | | ___) | / __/ _| |__| | | (__| |__| |_) | | | __/ /_/\_\___|_| |_| |____(_)_____(_)_| |_| \___|_| | .__/|_| \___| |_| (XEN) Xen version 3.2.1-rc1-pre (buildd@buildd) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) Fri Apr 11 01:12:53 UTC 2008 (XEN) Latest ChangeSet: unavailable (XEN) Command line: console=com1,vga com1=38400,8n1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 2 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009e400 (usable) (XEN) 000000000009e400 - 00000000000a0000 (reserved) (XEN) 00000000000ca000 - 00000000000d4000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000001fef0000 (usable) (XEN) 000000001fef0000 - 000000001feff000 (ACPI data) (XEN) 000000001feff000 - 000000001ff00000 (ACPI NVS) (XEN) 000000001ff00000 - 0000000020000000 (usable) (XEN) 00000000fec00000 - 00000000fed00000 (reserved) (XEN) 00000000fee00000 - 00000000fef00000 (reserved) (XEN) 00000000ffc00000 - 0000000100000000 (reserved) (XEN) System RAM: 511MB (523832kB) (XEN) Xen heap: 9MB (10140kB) (XEN) Domain heap initialised: DMA width 32 bits (XEN) PAE enabled, limit: 16 GB (XEN) Processor #0 15:2 APIC version 20 (XEN) Processor #1 15:2 APIC version 20 (XEN) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15 (XEN) IOAPIC[1]: apic_id 3, version 17, address 0xfec10000, GSI 16-31 (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2800.200 MHz processor. (XEN) CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09 (XEN) Booting processor 1/1 eip 8c000 (XEN) CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09 (XEN) Total of 2 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) Platform timer overflows in 234 jiffies. (XEN) Platform timer is 3.579MHz ACPI PM Timer (XEN) Brought up 2 CPUs (XEN) AMD IOMMU: Disabled (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 32-bit, PAE, lsb (XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0xc0100000 -> 0xc0503000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 000000001c000000->000000001e000000 (110593 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0100000->c0503000 (XEN) Init. ramdisk: c0503000->c166b800 (XEN) Phys-Mach map: c166c000->c16e0004 (XEN) Start info: c16e1000->c16e1474 (XEN) Page tables: c16e2000->c16f3000 (XEN) Boot stack: c16f3000->c16f4000 (XEN) TOTAL: c0000000->c1800000 (XEN) ENTRY ADDRESS: c0100000 (XEN) Dom0 has maximum 2 VCPUs (XEN) Initrd len 0x1168800, start at 0xc0503000 (XEN) Scrubbing Free RAM: done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 96kB init memory. [ 0.000000] Linux version 2.6.24-19-xen (root@hard-build) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Tue Jul 1 18:49:26 UTC 2008 (Ubuntu 2.6.24-4.6-generic) [ 0.000000] Reserving virtual address space above 0xf5800000 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000001d801000 (usable) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 472MB LOWMEM available. [ 0.503391] Zone PFN ranges: [ 0.503393] DMA 0 -> 4096 [ 0.503396] Normal 4096 -> 120833 [ 0.503398] HighMem 120833 -> 120833 [ 0.503400] Movable zone start PFN for each node [ 0.503401] early_node_map[1] active PFN ranges [ 0.503404] 0: 0 -> 120833 [ 0.522757] found SMP MP-table at 000f6aa0 [ 0.524541] DMI present. [ 0.524660] ACPI: RSDP 000F6A30, 0014 (r0 PTLTD ) [ 0.524667] ACPI: RSDT 1FEFA807, 0034 (r1 PTLTD RSDT 6040001 LTP 0) [ 0.524676] ACPI: FACP 1FEFA83B, 0074 (r1 FSC D1409 6040001 F4240) [ 0.524684] ACPI: DSDT 1FEFA8AF, 4665 (r1 FSC D1409 6040001 MSFT 100000E) [ 0.524690] ACPI: FACS 1FEFFFC0, 0040 [ 0.524695] ACPI: SPCR 1FEFEF14, 0050 (r1 PTLTD $UCRTBL$ 6040001 PTL 1) [ 0.524701] ACPI: APIC 1FEFEF64, 0074 (r1 PTLTD APIC 6040001 LTP 0) [ 0.524706] ACPI: BOOT 1FEFEFD8, 0028 (r1 PTLTD $SBFTBL$ 6040001 LTP 1) [ 0.524729] ACPI: DMI detected: Fujitsu Siemens [ 0.524744] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.524747] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.524752] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.524754] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.524758] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.524768] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15 [ 0.524770] ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[16]) [ 0.524778] IOAPIC[1]: apic_id 3, version 17, address 0xfec10000, GSI 16-31 [ 0.524781] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.524784] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.524795] Using ACPI (MADT) for SMP configuration information [ 0.524801] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) [ 0.524878] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 119889 [ 0.524883] Kernel command line: root=UUID=e6b54ee1-45a3-4aaf-9fa6-5498eaa0ece2 ro console=tty0 console=ttyS0,38400n8 [ 0.525099] Enabling fast FPU save and restore... done. [ 0.525108] Enabling unmasked SIMD FPU exception support... done. [ 0.525113] Initializing CPU#0 [ 0.525353] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.525473] Xen reported: 2800.200 MHz processor. [ 0.415138] console [xvc-1] enabled [ 0.417859] Console: colour VGA+ 80x25 [ 0.417865] console [tty0] enabled [ 0.000000] Linux version 2.6.24-19-xen (root@hard-build) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Tue Jul 1 18:49:26 UTC 2008 (Ubuntu 2.6.24-4.6-generic) [ 0.000000] Reserving virtual address space above 0xf5800000 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000001d801000 (usable) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 472MB LOWMEM available. [ 0.503391] Zone PFN ranges: [ 0.503393] DMA 0 -> 4096 [ 0.503396] Normal 4096 -> 120833 [ 0.503398] HighMem 120833 -> 120833 [ 0.503400] Movable zone start PFN for each node [ 0.503401] early_node_map[1] active PFN ranges [ 0.503404] 0: 0 -> 120833 [ 0.522757] found SMP MP-table at 000f6aa0 [ 0.524541] DMI present. [ 0.524660] ACPI: RSDP 000F6A30, 0014 (r0 PTLTD ) [ 0.524667] ACPI: RSDT 1FEFA807, 0034 (r1 PTLTD RSDT 6040001 LTP 0) [ 0.524676] ACPI: FACP 1FEFA83B, 0074 (r1 FSC D1409 6040001 F4240) [ 0.524684] ACPI: DSDT 1FEFA8AF, 4665 (r1 FSC D1409 6040001 MSFT 100000E) [ 0.524690] ACPI: FACS 1FEFFFC0, 0040 [ 0.524695] ACPI: SPCR 1FEFEF14, 0050 (r1 PTLTD $UCRTBL$ 6040001 PTL 1) [ 0.524701] ACPI: APIC 1FEFEF64, 0074 (r1 PTLTD APIC 6040001 LTP 0) [ 0.524706] ACPI: BOOT 1FEFEFD8, 0028 (r1 PTLTD $SBFTBL$ 6040001 LTP 1) [ 0.524729] ACPI: DMI detected: Fujitsu Siemens [ 0.524744] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.524747] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.524752] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.524754] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.524758] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.524768] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15 [ 0.524770] ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[16]) [ 0.524778] IOAPIC[1]: apic_id 3, version 17, address 0xfec10000, GSI 16-31 [ 0.524781] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.524784] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.524795] Using ACPI (MADT) for SMP configuration information [ 0.524801] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) [ 0.524878] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 119889 [ 0.524883] Kernel command line: root=UUID=e6b54ee1-45a3-4aaf-9fa6-5498eaa0ece2 ro console=tty0 console=ttyS0,38400n8 [ 0.525099] Enabling fast FPU save and restore... done. [ 0.525108] Enabling unmasked SIMD FPU exception support... done. [ 0.525113] Initializing CPU#0 [ 0.525353] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.525473] Xen reported: 2800.200 MHz processor. [ 0.415138] console [xvc-1] enabled [ 0.417859] Console: colour VGA+ 80x25 [ 0.417865] console [tty0] enabled [ 0.423754] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.424103] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.430421] Software IO TLB enabled: [ 0.430425] Aperture: 2 megabytes [ 0.430426] Kernel range: c1b29000 - c1d29000 [ 0.430427] Address size: 24 bits [ 0.430935] vmalloc area: de800000-f53fe000, maxmem 2d800000 [ 0.437790] Memory: 445244k/483332k available (2225k kernel code, 29792k reserved, 1010k data, 212k init, 0k highmem) [ 0.437960] virtual kernel memory layout: [ 0.437962] fixmap : 0xf568d000 - 0xf57ff000 (1480 kB) [ 0.437963] pkmap : 0xf5400000 - 0xf5600000 (2048 kB) [ 0.437964] vmalloc : 0xde800000 - 0xf53fe000 ( 363 MB) [ 0.437965] lowmem : 0xc0000000 - 0xdd801000 ( 472 MB) [ 0.437966] .init : 0xc042f000 - 0xc0464000 ( 212 kB) [ 0.437967] .data : 0xc032c501 - 0xc0428d04 (1010 kB) [ 0.437969] .text : 0xc0100000 - 0xc032c501 (2225 kB) [ 0.438976] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 0.507172] Calibrating delay using timer specific routine.. 5605.59 BogoMIPS (lpj=11211185) [ 0.507468] Security Framework initialized [ 0.507599] SELinux: Disabled at boot. [ 0.507730] AppArmor: AppArmor initialized [ 0.507860] Failure registering capabilities with primary security module. [ 0.508009] Mount-cache hash table entries: 512 [ 0.508301] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.508532] CPU: L2 cache: 512K [ 0.508668] Compat vDSO mapped to f57fe000. [ 0.508800] Checking 'hlt' instruction... OK. [ 0.509422] SMP alternatives: switching to UP code [ 0.510332] Early unpacking initramfs... done [ 0.535494] ACPI: Core revision 20070126 [ 0.535719] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 0.545095] ENABLING IO-APIC IRQs [ 0.545516] SMP alternatives: switching to SMP code [ 0.000000] Initializing CPU#1 [ 0.546359] Brought up 2 CPUs [ 0.000450] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.000766] CPU: L2 cache: 512K [ 0.548076] net_namespace: 64 bytes [ 0.548287] failed to set up cpufreq notifier [ 0.549332] Time: 19:19:23 Date: 07/01/08 [ 0.549525] NET: Registered protocol family 16 [ 0.550279] ACPI: bus type pci registered [ 0.550685] PCI: Using configuration type 1 [ 0.550900] Setting up standard PCI resources [ 0.568831] ACPI: Interpreter enabled [ 0.569039] ACPI: (supports S0 S1 S5) [ 0.569799] ACPI: Using IOAPIC for interrupt routing [ 0.576740] ACPI: Device [ECP] status [00000008]: functional but not present; setting present [ 0.579666] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.586183] ACPI: PCI Root Bridge [PCIA] (0000:01) [ 0.587094] ACPI: PCI Root Bridge [PCIB] (0000:02) [ 0.588931] ACPI: PCI Root Bridge [PCIC] (0000:03) [ 0.601616] ACPI: PCI Root Bridge [PCID] (0000:04) [ 0.613386] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.649755] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.674249] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.695776] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.716855] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.741044] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.765866] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.791060] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.815919] ACPI: PCI Interrupt Link [LNKI] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.836902] ACPI: PCI Interrupt Link [LNKJ] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.857986] ACPI: PCI Interrupt Link [LNKK] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.878988] ACPI: PCI Interrupt Link [LNKL] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.900003] ACPI: PCI Interrupt Link [LNKM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.924435] ACPI: PCI Interrupt Link [LNKN] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.949479] ACPI: PCI Interrupt Link [LNKO] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.974439] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.999410] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 1.021126] Linux Plug and Play Support v0.97 (c) Adam Belay [ 1.024133] pnp: PnP ACPI init [ 1.040711] ACPI: bus type pnp registered (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4 (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000109f1 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! [ 1.090611] pnp: PnP ACPI: found 16 devices [ 1.111448] ACPI: ACPI bus type pnp unregistered [ 1.123906] xen_mem: Initialising balloon driver. [ 1.141323] PCI: Using ACPI for IRQ routing [ 1.153037] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 1.181664] NET: Registered protocol family 8 [ 1.190486] NET: Registered protocol family 20 [ 1.203083] AppArmor: AppArmor Filesystem Enabled [ 0.659200] Time: xen clocksource has been installed. [ 1.245767] system 00:01: ioport range 0x40b-0x40b has been reserved [ 1.245976] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 1.265379] system 00:01: ioport range 0x4d6-0x4d6 has been reserved [ 1.282016] system 00:01: ioport range 0x600-0x603 has been reserved [ 1.302927] system 00:01: ioport range 0xc00-0xc01 has been reserved [ 1.323718] system 00:01: ioport range 0xc06-0xc08 has been reserved [ 1.340360] system 00:01: ioport range 0xc14-0xc14 has been reserved [ 1.361359] system 00:01: ioport range 0xc4a-0xc4a has been reserved [ 1.377911] system 00:01: ioport range 0xc50-0xc52 has been reserved [ 1.398880] system 00:01: ioport range 0xc6c-0xc6c has been reserved [ 1.415517] system 00:01: ioport range 0xc6f-0xc6f has been reserved [ 1.436311] system 00:01: ioport range 0xca2-0xca3 has been reserved [ 1.452971] system 00:01: ioport range 0xca4-0xca5 has been reserved [ 1.473842] system 00:01: ioport range 0xcd6-0xcd7 has been reserved [ 1.494703] system 00:01: ioport range 0xf50-0xf58 has been reserved [ 1.511513] system 00:01: ioport range 0xf100-0xf11f has been reserved [ 1.532270] system 00:01: ioport range 0xf080-0xf08f has been reserved [ 1.548886] system 00:01: ioport range 0xf090-0xf093 has been reserved [ 1.569769] system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved [ 1.590569] system 00:01: iomem range 0xfec00000-0xfecfffff could not be reserved [ 1.612808] NET: Registered protocol family 2 [ 1.673801] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 1.674407] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 1.674726] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 1.690745] TCP: Hash tables configured (established 16384 bind 16384) [ 1.711657] TCP reno registered [ 1.737875] checking if image is initramfs... it is [ 1.824718] Freeing initrd memory: 17826k freed [ 1.825204] Simple Boot Flag at 0x69 set to 0x1 [ 1.826143] audit: initializing netlink socket (disabled) [ 1.826371] audit(1214939964.936:1): initialized [ 1.826920] VFS: Disk quotas dquot_6.5.1 [ 1.827091] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.827356] io scheduler noop registered [ 1.840695] io scheduler anticipatory registered [ 1.853059] io scheduler deadline registered [ 1.865644] io scheduler cfq registered (default) [ 1.878657] Xen virtual console successfully installed as xvc0 [ 1.894808] Event-channel device installed. [ 1.929408] Successfully initialized TPM backend driver. [ 1.972108] Real Time Clock Driver v1.12ac [ 1.973224] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 1.973470] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.974275] PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.001472] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.019566] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.049727] mice: PS/2 mouse device common for all mice [ 2.049917] cpuidle: using governor ladder [ 2.065442] NET: Registered protocol family 1 [ 2.077856] Using IPI No-Shortcut mode [ 2.090557] registered taskstats version 1 [ 2.103052] Magic number: 0:367:343 [ 2.115443] hash matches device tty60 [ 2.123925] Freeing unused kernel memory: 212k freed Loading, please wait... [ 1.613541] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 Begin: Loading essential drivers... ... [ 2.474075] fuse init (API version 7.9) [ 2.492913] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 2.493330] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 2.518539] device-mapper: uevent: version 1.0.3 [ 2.518789] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com Done. Begin: Running /scripts/init-premount ... Done. Begin: Mounting root file system... ... Begin: Running /scripts/local-top ... Done. Begin: Waiting for root file system... ... [ 2.514878] SCSI subsystem initialized [ 2.575525] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 3.556792] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 3.556972] Copyright (c) 1999-2006 Intel Corporation. [ 3.146378] Fusion MPT base driver 3.04.06 [ 3.146583] Copyright (c) 1999-2007 LSI Corporation [ 3.166899] Fusion MPT FC Host driver 3.04.06 [ 3.227252] Floppy drive(s): fd0 is 1.44M [ 3.227650] floppy0: Unable to grab DMA2 for the floppy driver [ 3.256330] FDC 0 is a post-1991 82077 [ 17.849164] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 [ 17.849168] [ 17.849169] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs [ 17.849172] [ 18.397257] tg3.c:v3.86 (November 9, 2007) [ 18.397505] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 17 [ 18.416490] eth0: Tigon3 [partno(BCM95704A6) rev 2002 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:30:05:75:ca:ed [ 18.417273] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[0] [ 18.417420] eth0: dma_rwctrl[769f4000] dma_mask[64-bit] [ 18.417621] ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 19 (level, low) -> IRQ 18 [ 18.443059] eth1: Tigon3 [partno(BCM95704A6) rev 2002 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:30:05:75:ca:ee [ 18.443854] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 18.444002] eth1: dma_rwctrl[769f4000] dma_mask[64-bit] [ 17.899027] ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 26 (level, low) -> IRQ 19 [ 18.643741] scsi2 : pata_serverworks [ 18.645365] scsi3 : pata_serverworks [ 18.645617] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1800 irq 14 [ 18.645788] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1808 irq 15 [ 18.656122] scsi 0:0:1:0: Sequential-Access HP Ultrium 3-SCSI G25H PQ: 0 ANSI: 3 [ 18.656332] scsi0:A:1:0: Tagged Queuing enabled. Depth 8 [ 18.656653] target0:0:1: Beginning Domain Validation [ 18.658366] target0:0:1: wide asynchronous [ 18.659721] target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 64) [ 18.668206] target0:0:1: Domain Validation skipping write tests [ 18.668387] target0:0:1: Ending Domain Validation [ 18.964179] ata1.00: ATAPI: LG CD-ROM CRN-8245B, 1.00, max UDMA/33 [ 19.136122] ata1.00: configured for UDMA/33 [ 19.291853] scsi: waiting for bus probes to complete ... [ 19.697630] scsi 0:0:6:0: Medium Changer OVERLAND NEO Series 0515 PQ: 0 ANSI: 2 [ 19.697882] target0:0:6: Beginning Domain Validation [ 19.701930] target0:0:6: wide asynchronous [ 19.703004] target0:0:6: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 15) [ 19.703841] target0:0:6: Domain Validation skipping write tests [ 19.703973] target0:0:6: Ending Domain Validation [ 21.758515] scsi 2:0:0:0: CD-ROM LG CD-ROM CRN-8245B 1.00 PQ: 0 ANSI: 5 [ 21.228201] scsi 0:0:1:0: Attached scsi generic sg0 type 1 [ 21.228452] scsi 0:0:6:0: Attached scsi generic sg1 type 8 [ 21.228653] scsi 2:0:0:0: Attached scsi generic sg2 type 5 [ 21.243076] SCSI Media Changer driver v0.25 [ 21.243313] Driver 'ch' needs updating - please use bus_type methods [ 21.790866] target0:0:6: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 15) [ 21.245042] ch0: type #1 (mt): 0x0+1 [medium transport] [ 21.245210] ch0: type #2 (st): 0x20+29 [storage] [ 21.245374] ch0: type #3 (ie): 0x1c0+1 [import/export] [ 21.245536] ch0: type #4 (dt): 0x1e0+1 [data transfer] [ 21.246613] ch0: dt 0x1e0: <6>st: Version 20070203, fixed bufsize 32768, s/g segs 256 [ 21.793185] Driver 'st' needs updating - please use bus_type methods [ 21.247016] ID 1, LUN 0, name: HP Ultrium 3-SCSI G25H [ 21.793688] st 0:0:1:0: Attached scsi tape st0 [ 21.793695] st 0:0:1:0: st0: try direct i/o: yes (alignment 512 B) [ 21.247570] ch0: INITIALIZE ELEMENT STATUS, may take some time ... [ 21.247884] ch0: ... finished [ 21.248032] ch 0:0:6:0: Attached scsi changer ch0 [ 21.806452] osst :I: Tape driver with OnStream support version 0.99.4 [ 21.806456] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 21.806858] Driver 'osst' needs updating - please use bus_type methods [ 33.259742] scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 [ 33.259746] [ 33.259747] aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs [ 33.260903] ACPI: PCI Interrupt 0000:03:04.1[B] -> GSI 27 (level, low) -> IRQ 20 [ 33.808852] scsi 1:0:0:0: Direct-Access FUJITSU MAP3735NC 5207 PQ: 0 ANSI: 3 [ 33.809075] target1:0:0: asynchronous [ 33.809331] scsi1:A:0:0: Tagged Queuing enabled. Depth 32 [ 33.809735] target1:0:0: Beginning Domain Validation [ 33.815419] target1:0:0: wide asynchronous [ 33.820261] target1:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS PCOMP (6.25 ns, offset 127) [ 33.838849] target1:0:0: Ending Domain Validation [ 35.393288] scsi 1:0:8:0: Processor SDR GEM318 0 PQ: 0 ANSI: 2 [ 35.393464] target1:0:8: asynchronous [ 35.393598] target1:0:8: Beginning Domain Validation [ 35.394129] target1:0:8: Ending Domain Validation [ 37.203452] scsi 1:0:0:0: Attached scsi generic sg3 type 0 [ 37.203686] scsi 1:0:8:0: Attached scsi generic sg4 type 3 [ 48.574289] scsi4 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 [ 48.574293] [ 48.574295] aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs [ 49.122089] ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 24 (level, low) -> IRQ 21 [ 49.397349] e1000: 0000:03:08.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:04:23:9f:04:d6 [ 48.851976] Driver 'sd' needs updating - please use bus_type methods [ 48.854840] sd 1:0:0:0: [sda] 143571316 512-byte hardware sectors (73509 MB) [ 49.403814] sd 1:0:0:0: [sda] Write Protect is off [ 49.405627] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 49.406744] sd 1:0:0:0: [sda] 143571316 512-byte hardware sectors (73509 MB) [ 49.409310] sd 1:0:0:0: [sda] Write Protect is off [ 49.411827] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 49.412072] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 49.419600] sda1 sda2 sda3 sda4 [ 49.434199] sd 1:0:0:0: [sda] Attached SCSI disk [ 49.436840] e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection [ 48.895550] ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 20 (level, low) -> IRQ 22 [ 48.895968] mptbase: ioc0: Initiating bringup [ 48.896156] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 48.896347] Uniform CD-ROM driver Revision: 3.20 [ 48.898341] ACPI: PCI Interrupt 0000:03:08.1[B] -> GSI 25 (level, low) -> IRQ 23 [ 49.454022] usbcore: registered new interface driver usbfs [ 49.454274] usbcore: registered new interface driver hub [ 49.456573] usbcore: registered new device driver usb [ 49.463860] ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 11 [ 49.464112] ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LNKU] -> GSI 11 (level, low) -> IRQ 11 [ 49.464686] ohci_hcd 0000:00:0f.2: OHCI Host Controller [ 49.465397] ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1 [ 49.465704] ohci_hcd 0000:00:0f.2: irq 11, io mem 0xfc002000 [ 49.518947] usb usb1: configuration #1 chosen from 1 choice [ 49.519162] hub 1-0:1.0: USB hub found [ 49.519356] hub 1-0:1.0: 4 ports detected [ 49.172341] e1000: 0000:03:08.1: e1000_probe: (PCI-X:100MHz:64-bit) 00:04:23:9f:04:d7 [ 49.211457] e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection Done. Begin: Running /scripts/local-premount ... [ 49.522976] ioc0: LSIFC949X A1: Capabilities={Initiator,Target,LAN} Done. [ 49.687882] EXT3-fs: INFO: recovery required on readonly filesystem. [ 49.688030] EXT3-fs: write access will be enabled during recovery. [ 49.763639] kjournald starting. Commit interval 5 seconds [ 50.310029] EXT3-fs: recovery complete. [ 50.322207] EXT3-fs: mounted filesystem with ordered data mode. Begin: Running /scripts/local-bottom ... Done. Done. Begin: Running /scripts/init-bottom ... Done. * Setting preliminary keymap... [ 50.991925] scsi5 : ioc0: LSIFC949X A1, FwRev=01030200h, Ports=1, MaxQ=1023, IRQ=22 ...done. [ 51.004512] mptfc: ioc0: FC Link Established, Speed = 4 Gbps [ 51.006729] scsi: waiting for bus probes to complete ... * Preparing restricted drivers... ...done. * Setting the system clock * Starting basic networking... ...done. [ 53.018633] scsi 5:0:0:0: Direct-Access IFT A24F-G2430 348C PQ: 0 ANSI: 4 [ 53.019455] sd 5:0:0:0: [sdb] 4096000000 512-byte hardware sectors (2097152 MB) [ 53.019945] sd 5:0:0:0: [sdb] Write Protect is off [ 53.020700] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 53.021322] sd 5:0:0:0: [sdb] 4096000000 512-byte hardware sectors (2097152 MB) [ 53.021813] sd 5:0:0:0: [sdb] Write Protect is off [ 53.022564] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 53.022782] sdb: unknown partition table [ 53.024076] sd 5:0:0:0: [sdb] Attached SCSI disk [ 53.024335] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 53.026069] scsi 5:0:0:1: Direct-Access IFT A24F-G2430 348C PQ: 0 ANSI: 4 [ 53.026798] sd 5:0:0:1: [sdc] 4096000000 512-byte hardware sectors (2097152 MB) [ 53.027291] sd 5:0:0:1: [sdc] Write Protect is off [ 53.028047] sd 5:0:0:1: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 53.028668] sd 5:0:0:1: [sdc] 4096000000 512-byte hardware sectors (2097152 MB) [ 53.029165] sd 5:0:0:1: [sdc] Write Protect is off [ 53.029765] sd 5:0:0:1: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 53.029920] sdc: unknown partition table [ 53.030616] sd 5:0:0:1: [sdc] Attached SCSI disk [ 53.030819] sd 5:0:0:1: Attached scsi generic sg6 type 0 [ 53.032277] scsi 5:0:0:2: Direct-Access IFT A24F-G2430 348C PQ: 0 ANSI: 4 [ 53.032892] sd 5:0:0:2: [sdd] 4096000000 512-byte hardware sectors (2097152 MB) [ 53.033248] sd 5:0:0:2: [sdd] Write Protect is off [ 53.033879] sd 5:0:0:2: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 53.034258] sd 5:0:0:2: [sdd] 4096000000 512-byte hardware sectors (2097152 MB) [ 53.034618] sd 5:0:0:2: [sdd] Write Protect is off [ 53.035250] sd 5:0:0:2: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 53.035441] sdd: unknown partition table [ 53.036364] sd 5:0:0:2: [sdd] Attached SCSI disk [ 53.036619] sd 5:0:0:2: Attached scsi generic sg7 type 0 [ 53.038321] scsi 5:0:0:3: Direct-Access IFT A24F-G2430 348C PQ: 0 ANSI: 4 [ 53.039119] sd 5:0:0:3: [sde] 4096000000 512-byte hardware sectors (2097152 MB) [ 53.039477] sd 5:0:0:3: [sde] Write Protect is off [ 53.040107] sd 5:0:0:3: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 53.040487] sd 5:0:0:3: [sde] 4096000000 512-byte hardware sectors (2097152 MB) [ 53.040847] sd 5:0:0:3: [sde] Write Protect is off [ 53.041477] sd 5:0:0:3: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 53.041628] sde: unknown partition table [ 53.042316] sd 5:0:0:3: [sde] Attached SCSI disk [ 53.042489] sd 5:0:0:3: Attached scsi generic sg8 type 0 * Starting kernel event manager... ...done. * Loading hardware drivers... [ 55.297778] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 55.595287] Linux agpgart interface v0.102 [ 55.674759] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 55.675687] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 55.223753] piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device [ 56.414159] input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3 [ 56.453211] parport_pc 00:09: reported by Plug and Play ACPI [ 56.453478] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 55.934049] input: Power Button (FF) as /devices/virtual/input/input4 [ 55.996138] ACPI: Power Button (FF) [PWRF] [ 55.996512] input: Power Button (CM) as /devices/virtual/input/input5 [ 56.005889] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 56.064219] ACPI: Power Button (CM) [PWRB] ...done. * Setting the system clock * Loading kernel modules... * Loading manual drivers... [ 61.002987] loop: module loaded [ 61.033608] lp0: using parport0 (interrupt-driven). ...done. * Setting kernel variables... ...done. * Activating swap... ...done. * Checking root file system... fsck 1.40.8 (13-Mar-2008) /dev/sda3 has been mounted 32 times without being checked, check forced. /dev/sda3: 12126/122400 files (0.7% non-contiguous), 118698/487974 blocks ...done. * Checking file systems... fsck 1.40.8 (13-Mar-2008) /dev/sda1: recovering journal /dev/sda1: clean, 49/122880 files, 92087/489948 blocks /dev/mapper/xenserver2-tmp: recovering journal /dev/mapper/xenserver2-tmp: clean, 11/65536 files, 10597/262144 blocks /dev/mapper/xenserver2-usr: recovering journal /dev/mapper/xenserver2-usr: clean, 20629/327680 files, 103334/1310720 blocks (check in 5 mounts) /dev/mapper/xenserver2-var: recovering journal /dev/mapper/xenserver2-var: clean, 1967/65536 files, 66038/262144 blocks ...done. * Mounting local filesystems... ...done. * Activating swapfile swap... ...done. $Mounting securityfs on /sys/kernel/security: done. Loading AppArmor profiles : done. [ OK ]cking minimum space in /tmp... [ OK ]pping firewall: ufw (not enabled)... [ OK ]figuring network interfaces... /etc/cluster/cluster.conf does not exist or is empty. See /usr/share/doc/gfs-tools/examples/min-gfs.txt for instructions on how to setup a minimal cluster. cluster manager will not be started. clvmd: cluster not configured. Aborting. [ OK ]rting system log daemon... [ OK ]rting kernel log daemon... [ OK ]rting OpenBSD Secure Shell server sshd [ 72.841821] tmpbridge: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. ifdown: interface eth0 not configured Nothing to flush. Waiting for peth0 to negotiate link.... Ignoring unknown interface eth0=eth0. [ 76.135311] vlan10: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 76.141632] vlan20: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 75.604856] vlan30: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. Added VLAN with VID == 10 to IF -:peth0:- Added VLAN with VID == 20 to IF -:peth0:- Added VLAN with VID == 30 to IF -:peth0:- Cannot find device "eth0" bridge eth0 doesn't exist; can't delete it device vlan10 already exists; can't create bridge with the same name device vlan20 already exists; can't create bridge with the same name device vlan30 already exists; can't create bridge with the same name Added VLAN with VID == 10 to IF -:peth0:- Added VLAN with VID == 20 to IF -:peth0:- Added VLAN with VID == 30 to IF -:peth0:- device vif0.0 is already a member of a bridge; can't enslave it to bridge vlan10. [ OK ]rting NTP server ntpd [ OK ]rting deferred execution scheduler atd [ OK ]rting periodic command scheduler crond [ OK ]ning local boot scripts (/etc/rc.local) Ubuntu 8.04 xenserver2 xvc0 xenserver2 login: root Password: Last login: Tue Jul 1 21:02:24 CEST 2008 on tty2 Linux xenserver2 2.6.24-19-xen #1 SMP Tue Jul 1 18:49:26 UTC 2008 i686 The programs included with the Ubuntu system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. To access official Ubuntu documentation, please visit: http://help.ubuntu.com/ root@xenserver2:~# ls -l /lib/modules/2.6.24-19-xen/ build/ modules.dep modules.seriomap initrd/ modules.ieee1394map modules.symbols kernel/ modules.inputmap modules.usbmap madwifi/ modules.isapnpmap ubuntu/ modules.alias modules.ofmap volatile/ modules.ccwmap modules.pcimap volatile_bcmwl/ aic7@xenserver2:~# ls -l /lib/modules/2.6.24-19-xen/kernel/drivers/scsi/aic7xxx/ aic79xx.ko aic7xxx.ko aic7* -rw-r--r-- 1 root root 356352 2008-07-01 20:55 /lib/modules/2.6.24-19-xen/kernel/drivers/scsi/aic7xxx/aic79xx.ko -rw-r--r-- 1 root root 220892 2008-07-01 20:55 /lib/modules/2.6.24-19-xen/kernel/drivers/scsi/aic7xxx/aic7xxx.ko root@xenserver2:~# aptsh Generating and mapping caches... [ 141.861949] PCI-DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:03:04.0 [ 141.862176] ------------[ cut here ]------------ [ 141.862309] kernel BUG at /home/essigke/linux-2.6.24/debian/build/custom-source-xen/drivers/scsi/aic7xxx/aic79xx_osm.c:1490! [ 141.862464] invalid opcode: 0000 [#1] SMP [ 141.862795] Modules linked in: 8021q bridge ipv6 iptable_filter ip_tables x_tables lp loop container serio_raw 8250_pnp button pata_acpi sworks_agp i2c_piix4 evdev 8250 seri al_core agpgart parport_pc parport i2c_core psmouse pcspkr ext3 jbd mbcache ohci_hcd usbcore sr_mod cdrom sd_mod osst st ch sg pata_serverworks floppy mptfc mptscsih mptbase sc si_transport_fc scsi_tgt e1000 aic79xx ata_generic tg3 ssb libata aic7xxx scsi_transport_spi scsi_mod dm_mirror dm_snapshot dm_mod thermal processor fan fuse [ 141.869315] [ 141.869438] Pid: 51, comm: kblockd/0 Not tainted (2.6.24-19-xen #1) [ 141.869568] EIP: 0061:[] EFLAGS: 00010082 CPU: 0 [ 141.869739] EIP is at ahd_linux_queue+0x661/0x670 [aic79xx] [ 141.869871] EAX: fffffff4 EBX: dbb6dee6 ECX: dd6b4080 EDX: 00000002 [ 141.870003] ESI: dd48acbe EDI: dd73704a EBP: dd56e000 ESP: dbb6de90 [ 141.870134] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069 [ 141.870263] Process kblockd/0 (pid: 51, ti=dbb6c000 task=dbb5e270 task.ti=dbb6c000) [ 141.870398] Stack: dd613bfc dd48ac80 01635dfb 00000000 0003f000 c0208a9d c045f020 0e325bf9 [ 141.871479] 00000021 0e325bf9 dd488ca8 dd48ac80 dd56e000 dade0e48 c0130a67 de8cb6a0 [ 141.872557] dd49f4c0 c049ce80 fffffff4 00000001 00000000 07200000 dd48ac80 00000000 [ 141.873629] Call Trace: [ 141.873903] [] cfq_dispatch_requests+0x6d/0x2f0 [ 141.874151] [] lock_timer_base+0x27/0x60 [ 141.874389] [] scsi_times_out+0x0/0x80 [scsi_mod] [ 141.874650] [] scsi_dispatch_cmd+0x147/0x280 [scsi_mod] [ 141.874904] [] scsi_request_fn+0x1fc/0x3e0 [scsi_mod] [ 141.875155] [] worker_thread+0x0/0xe0 [ 141.875397] [] __generic_unplug_device+0x25/0x30 [ 141.875639] [] generic_unplug_device+0x15/0x50 [ 141.875880] [] blk_unplug_work+0x42/0xa0 [ 141.876132] [] blk_unplug_work+0x0/0xa0 [ 141.876367] [] run_workqueue+0x93/0x160 [ 141.876608] [] worker_thread+0x0/0xe0 [ 141.876844] [] worker_thread+0x84/0xe0 [ 141.877080] [] autoremove_wake_function+0x0/0x40 [ 141.877323] [] worker_thread+0x0/0xe0 [ 141.877558] [] kthread+0x42/0x70 [ 141.877796] [] kthread+0x0/0x70 [ 141.878055] [] kernel_thread_helper+0x7/0x10 [ 141.878295] ======================= [ 141.878421] Code: ff f6 40 1c 20 0f 84 f2 fe ff ff 80 4f 12 22 c7 40 5c 00 00 00 00 e9 1e fb ff ff 89 54 24 04 c7 04 24 b0 3a a0 de e8 1f ea 72 e1 <0f> 0b eb fe 8d 74 26 00 8d bc 27 00 00 00 00 83 ec 20 89 74 24 [ 141.886713] EIP: [] ahd_linux_queue+0x661/0x670 [aic79xx] SS:ESP 0069:dbb6de90 [ 141.887159] ---[ end trace 5db331e4a19b0f04 ]---