Dumping 112 device(s) from the Global Device List: ------------------------------------------------- udi = '/org/freedesktop/Hal/devices/computer' info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list) info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list) info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list) info.capabilities = {'cpufreq_control'} (string list) info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list) info.product = 'Computer' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/computer' (string) org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list) power_management.acpi.linux.version = '20070126' (string) power_management.can_hibernate = true (bool) power_management.can_suspend = true (bool) power_management.can_suspend_hybrid = false (bool) power_management.can_suspend_to_disk = true (bool) power_management.can_suspend_to_ram = true (bool) power_management.is_powersave_set = false (bool) power_management.type = 'acpi' (string) system.chassis.manufacturer = 'SAMSUNG ELECTRONICS CO., LTD.' (string) system.chassis.type = 'Other' (string) system.firmware.release_date = '07/18/2007' (string) system.firmware.vendor = 'Phoenix Technologies LTD' (string) system.firmware.version = '14SH' (string) system.formfactor = 'laptop' (string) system.hardware.primary_video.product = 31042 (0x7942) (int) system.hardware.primary_video.vendor = 4098 (0x1002) (int) system.hardware.product = 'R19/R20/R21' (string) system.hardware.serial = '146W93DP400149' (string) system.hardware.uuid = 'E0A6BE2A-D21D-B211-8000-ED3B21E3E16B' (string) system.hardware.vendor = 'SAMSUNG ELECTRONICS CO., LTD.' (string) system.hardware.version = '09SH' (string) system.kernel.machine = 'i686' (string) system.kernel.name = 'Linux' (string) system.kernel.version = '2.6.24-17-generic' (string) udi = '/org/freedesktop/Hal/devices/acpi_CPU0' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Intel(R) Core(TM) Duo CPU T2350 @ 1.86GHz' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0' (string) linux.acpi_path = '/proc/acpi/processor/CPU0' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = true (bool) processor.number = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/acpi_CPU1' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Intel(R) Core(TM) Duo CPU T2350 @ 1.86GHz' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1' (string) linux.acpi_path = '/proc/acpi/processor/CPU1' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = true (bool) processor.number = 1 (0x1) (int) udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' access_control.file = '/dev/snd/timer' (string) access_control.type = 'sound' (string) alsa.device_file = '/dev/snd/timer' (string) alsa.type = 'timer' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ALSA Timer Device' (string) info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string) linux.device_file = '/dev/snd/timer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/timer' (string) udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' access_control.file = '/dev/sequencer2' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'OSS Sequencer Device' (string) info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string) linux.device_file = '/dev/sequencer2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2' (string) oss.device_file = '/dev/sequencer2' (string) oss.type = 'sequencer' (string) udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' access_control.file = '/dev/sequencer' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'OSS Sequencer Device' (string) info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string) linux.device_file = '/dev/sequencer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/sequencer' (string) oss.device_file = '/dev/sequencer' (string) oss.type = 'sequencer' (string) udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' access_control.file = '/dev/snd/seq' (string) access_control.type = 'sound' (string) alsa.device_file = '/dev/snd/seq' (string) alsa.type = 'sequencer' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ALSA Sequencer Device' (string) info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string) linux.device_file = '/dev/snd/seq' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/seq' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4' button.has_state = false (bool) button.type = 'sleep' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Sleep Button (CM)' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4' (string) input.device = '/dev/input/event10' (string) input.product = 'Sleep Button (CM)' (string) linux.device_file = '/dev/input/event10' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input13/event10' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3' button.has_state = true (bool) button.state.value = false (bool) button.type = 'lid' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'input.switch', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Lid Switch' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3' (string) input.device = '/dev/input/event9' (string) input.product = 'Lid Switch' (string) linux.device_file = '/dev/input/event9' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input12/event9' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' button.has_state = false (bool) button.type = 'power' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button (CM)' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string) input.device = '/dev/input/event8' (string) input.product = 'Power Button (CM)' (string) linux.device_file = '/dev/input/event8' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input11/event8' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' button.has_state = false (bool) button.type = 'power' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button (FF)' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string) input.device = '/dev/input/event7' (string) input.product = 'Power Button (FF)' (string) linux.device_file = '/dev/input/event7' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input10/event7' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' info.capabilities = {'input', 'input.mouse'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Macintosh mouse button emulation' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string) input.device = '/dev/input/event0' (string) input.product = 'Macintosh mouse button emulation' (string) linux.device_file = '/dev/input/event0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input0/event0' (string) udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT1' battery.charge_level.current = 35520 (0x8ac0) (int) battery.charge_level.design = 38480 (0x9650) (int) battery.charge_level.last_full = 35520 (0x8ac0) (int) battery.charge_level.percentage = 100 (0x64) (int) battery.charge_level.rate = 0 (0x0) (int) battery.is_rechargeable = true (bool) battery.model = '' (string) battery.present = true (bool) battery.rechargeable.is_charging = false (bool) battery.rechargeable.is_discharging = false (bool) battery.reporting.current = 2400 (0x960) (int) battery.reporting.design = 2600 (0xa28) (int) battery.reporting.last_full = 2400 (0x960) (int) battery.reporting.rate = 0 (0x0) (int) battery.reporting.technology = 'Li-ion' (string) battery.reporting.unit = 'mAh' (string) battery.technology = 'lithium-ion' (string) battery.type = 'primary' (string) battery.vendor = 'SAMSUNG Electronics' (string) battery.voltage.current = 16636 (0x40fc) (int) battery.voltage.design = 14800 (0x39d0) (int) battery.voltage.unit = 'mV' (string) info.capabilities = {'battery'} (string list) info.category = 'battery' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '' (string) info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'power_supply' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT1' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Video Bus' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string) input.device = '/dev/input/event11' (string) input.product = 'Video Bus' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'evdev' (string) input.xkb.rules = 'base' (string) input.xkb.variant = '' (string) linux.device_file = '/dev/input/event11' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1d/LNXVIDEO:00/input/input14/event11' (string) udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_ADP1' ac_adapter.present = true (bool) info.capabilities = {'ac_adapter'} (string list) info.category = 'ac_adapter' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Generic AC Adapter Device' (string) info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_ADP1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'power_supply' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/ACPI0003:00/power_supply/ADP1' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (PNP0103)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string) pnp.id = 'PNP0103' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'System Board' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:09' (string) pnp.description = 'System Board' (string) pnp.id = 'PNP0c01' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:08' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13' info.linux.driver = 'i8042 aux' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PS/2 Port for PS/2-style Mice' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:07' (string) pnp.description = 'PS/2 Port for PS/2-style Mice' (string) pnp.id = 'PNP0f13' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' info.linux.driver = 'i8042 kbd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:06' (string) pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) pnp.id = 'PNP0303' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT-style speaker sound' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:05' (string) pnp.description = 'AT-style speaker sound' (string) pnp.id = 'PNP0800' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT Real-Time Clock' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:04' (string) pnp.description = 'AT Real-Time Clock' (string) pnp.id = 'PNP0b00' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Math Coprocessor' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:03' (string) pnp.description = 'Math Coprocessor' (string) pnp.id = 'PNP0c04' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT DMA Controller' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:02' (string) pnp.description = 'AT DMA Controller' (string) pnp.id = 'PNP0200' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:01' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (PNP0a08)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:00' (string) pnp.id = 'PNP0a08' (string) udi = '/org/freedesktop/Hal/devices/platform_serial8250' info.linux.driver = 'serial8250' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (serial8250)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/serial8250' (string) platform.id = 'serial8250' (string) udi = '/org/freedesktop/Hal/devices/platform_pcspkr' info.linux.driver = 'pcspkr' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (pcspkr)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/pcspkr' (string) platform.id = 'pcspkr' (string) udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input' info.capabilities = {'input'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) info.product = 'PC Speaker' (string) info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input' (string) input.device = '/dev/input/event5' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) input.product = 'PC Speaker' (string) linux.device_file = '/dev/input/event5' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input8/event5' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042' info.linux.driver = 'i8042' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (i8042)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/i8042' (string) platform.id = 'i8042' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port' info.linux.driver = 'psmouse' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 AUX3 port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio4' (string) serio.description = 'i8042 AUX3 port' (string) serio.id = 'serio4' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input' info.capabilities = {'input', 'input.touchpad'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port' (string) info.product = 'SynPS/2 Synaptics TouchPad' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input' (string) input.device = '/dev/input/event6' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port' (string) input.product = 'SynPS/2 Synaptics TouchPad' (string) linux.device_file = '/dev/input/event6' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio4/input/input9/event6' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX2_port' info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 AUX2 port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX2_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio3' (string) serio.description = 'i8042 AUX2 port' (string) serio.id = 'serio3' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port' info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 AUX1 port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio2' (string) serio.description = 'i8042 AUX1 port' (string) serio.id = 'serio2' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX0_port' info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 AUX0 port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX0_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio1' (string) serio.description = 'i8042 AUX0 port' (string) serio.id = 'serio1' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' info.linux.driver = 'atkbd' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 KBD port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string) serio.description = 'i8042 KBD port' (string) serio.id = 'serio0' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) info.product = 'AT Translated Set 2 keyboard' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string) input.device = '/dev/input/event1' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) input.product = 'AT Translated Set 2 keyboard' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'evdev' (string) input.xkb.rules = 'base' (string) input.xkb.variant = '' (string) linux.device_file = '/dev/input/event1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input1/event1' (string) udi = '/org/freedesktop/Hal/devices/platform_eisa_0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (eisa.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_eisa_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/eisa.0' (string) platform.id = 'eisa.0' (string) udi = '/org/freedesktop/Hal/devices/platform_coretemp_1' info.linux.driver = 'coretemp' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (coretemp.1)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_coretemp_1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/coretemp.1' (string) platform.id = 'coretemp.1' (string) udi = '/org/freedesktop/Hal/devices/platform_coretemp_0' info.linux.driver = 'coretemp' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (coretemp.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_coretemp_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/coretemp.0' (string) platform.id = 'coretemp.0' (string) udi = '/org/freedesktop/Hal/devices/platform_bluetooth' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (bluetooth)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_bluetooth' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/bluetooth' (string) platform.id = 'bluetooth' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4384' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SBx00 PCI to PCI Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4384' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 1 (0x1) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4' (string) pci.product = 'SBx00 PCI to PCI Bridge' (string) pci.product_id = 17284 (0x4384) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pci_10ec_8139' info.linux.driver = '8139too' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4384' (string) info.product = 'RTL-8139/8139C/8139C+' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10ec_8139' (string) info.vendor = 'Realtek Semiconductor Co., Ltd.' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:08:05.0' (string) pci.device_class = 2 (0x2) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:08:05.0' (string) pci.product = 'RTL-8139/8139C/8139C+' (string) pci.product_id = 33081 (0x8139) (int) pci.subsys_product_id = 50449 (0xc511) (int) pci.subsys_vendor = 'Samsung Electronics Co Ltd' (string) pci.subsys_vendor_id = 5197 (0x144d) (int) pci.vendor = 'Realtek Semiconductor Co., Ltd.' (string) pci.vendor_id = 4332 (0x10ec) (int) udi = '/org/freedesktop/Hal/devices/net_00_13_77_49_c3_28' info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list) info.category = 'net.80203' (string) info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_10ec_8139' (string) info.product = 'Networking Interface' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_13_77_49_c3_28' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:08:05.0/net/eth0' (string) net.80203.mac_address = 83605701416 (0x137749c328) (uint64) net.address = '00:13:77:49:c3:28' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'eth0' (string) net.linux.ifindex = 2 (0x2) (int) net.originating_device = '/org/freedesktop/Hal/devices/pci_10ec_8139' (string) net.physical_device = '/org/freedesktop/Hal/devices/pci_10ec_8139' (string) org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list) udi = '/org/freedesktop/Hal/devices/pci_1002_438d' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB600 PCI to LPC Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_438d' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.3' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.3' (string) pci.product = 'SB600 PCI to LPC Bridge' (string) pci.product_id = 17293 (0x438d) (int) pci.subsys_product_id = 50449 (0xc511) (int) pci.subsys_vendor = 'Samsung Electronics Co Ltd' (string) pci.subsys_vendor_id = 5197 (0x144d) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4383' info.linux.driver = 'HDA Intel' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SBx00 Azalia' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2' (string) pci.device_class = 4 (0x4) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2' (string) pci.product = 'SBx00 Azalia' (string) pci.product_id = 17283 (0x4383) (int) pci.subsys_product_id = 50449 (0xc511) (int) pci.subsys_vendor = 'Samsung Electronics Co Ltd' (string) pci.subsys_vendor_id = 5197 (0x144d) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' info.capabilities = {'sound'} (string list) info.category = 'sound' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383' (string) info.product = 'HDA ATI SB Sound Card' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0' (string) sound.card = 0 (0x0) (int) sound.card_id = 'HDA ATI SB' (string) sound.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_playback_6' access_control.file = '/dev/snd/pcmC0D6p' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA ATI SB' (string) alsa.device = 6 (0x6) (int) alsa.device_file = '/dev/snd/pcmC0D6p' (string) alsa.device_id = 'Si3054 Modem' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'playback' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) info.product = 'Si3054 Modem ALSA Playback Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_playback_6' (string) linux.device_file = '/dev/snd/pcmC0D6p' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D6p' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_capture_6' access_control.file = '/dev/snd/pcmC0D6c' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA ATI SB' (string) alsa.device = 6 (0x6) (int) alsa.device_file = '/dev/snd/pcmC0D6c' (string) alsa.device_id = 'Si3054 Modem' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'capture' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) info.product = 'Si3054 Modem ALSA Capture Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_capture_6' (string) linux.device_file = '/dev/snd/pcmC0D6c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D6c' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_playback_0' access_control.file = '/dev/snd/pcmC0D0p' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA ATI SB' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/pcmC0D0p' (string) alsa.device_id = 'ALC262 Analog' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'playback' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) info.product = 'ALC262 Analog ALSA Playback Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_playback_0' (string) linux.device_file = '/dev/snd/pcmC0D0p' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D0p' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_capture_0' access_control.file = '/dev/snd/pcmC0D0c' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA ATI SB' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/pcmC0D0c' (string) alsa.device_id = 'ALC262 Analog' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'capture' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) info.product = 'ALC262 Analog ALSA Capture Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_capture_0' (string) linux.device_file = '/dev/snd/pcmC0D0c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D0c' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_mixer__1' access_control.file = '/dev/mixer' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) info.product = 'ALC262 Analog OSS Control Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_mixer__1' (string) linux.device_file = '/dev/mixer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/mixer' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA ATI SB' (string) oss.device_file = '/dev/mixer' (string) oss.device_id = 'ALC262 Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) oss.type = 'mixer' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_hw_specific_3' access_control.file = '/dev/snd/hwC0D3' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA ATI SB' (string) alsa.device = 3 (0x3) (int) alsa.device_file = '/dev/snd/hwC0D3' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) alsa.type = 'hw_specific' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) info.product = 'HDA ATI SB ALSA hardware specific Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_hw_specific_3' (string) linux.device_file = '/dev/snd/hwC0D3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/hwC0D3' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_hw_specific_1' access_control.file = '/dev/snd/hwC0D1' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA ATI SB' (string) alsa.device = 1 (0x1) (int) alsa.device_file = '/dev/snd/hwC0D1' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) alsa.type = 'hw_specific' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) info.product = 'HDA ATI SB ALSA hardware specific Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_hw_specific_1' (string) linux.device_file = '/dev/snd/hwC0D1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/hwC0D1' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_0_0' access_control.file = '/dev/dsp' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) info.product = 'ALC262 Analog OSS PCM Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_0_0' (string) linux.device_file = '/dev/dsp' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/dsp' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA ATI SB' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/dsp' (string) oss.device_id = 'ALC262 Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_control__1' access_control.file = '/dev/snd/controlC0' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA ATI SB' (string) alsa.device_file = '/dev/snd/controlC0' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) alsa.type = 'control' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) info.product = 'HDA ATI SB ALSA Control Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_control__1' (string) linux.device_file = '/dev/snd/controlC0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/controlC0' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_0' access_control.file = '/dev/audio' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) info.product = 'ALC262 Analog OSS PCM Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_0' (string) linux.device_file = '/dev/audio' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/audio' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA ATI SB' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/audio' (string) oss.device_id = 'ALC262 Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_438c' info.linux.driver = 'pata_atiixp' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB600 IDE' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_438c' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1' (string) pci.device_class = 1 (0x1) (int) pci.device_protocol = 138 (0x8a) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1' (string) pci.product = 'SB600 IDE' (string) pci.product_id = 17292 (0x438c) (int) pci.subsys_product_id = 50449 (0xc511) (int) pci.subsys_vendor = 'Samsung Electronics Co Ltd' (string) pci.subsys_vendor_id = 5197 (0x144d) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_438c' (string) info.product = 'SCSI Host Adapter' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1/host5' (string) scsi_host.host = 5 (0x5) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_device_lun0' info.linux.driver = 'sr' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1/host5/target5:0:0/5:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 5 (0x5) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'CD/DVDW TS-L632D' (string) scsi.target = 0 (0x0) (int) scsi.type = 'cdrom' (string) scsi.vendor = 'TSSTcorp' (string) udi = '/org/freedesktop/Hal/devices/storage_model_CD/DVDW_TS_L632D' access_control.file = '/dev/scd0' (string) access_control.type = 'cdrom' (string) block.device = '/dev/scd0' (string) block.is_volume = false (bool) block.major = 11 (0xb) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_model_CD/DVDW_TS_L632D' (string) info.addons = {'hald-addon-storage'} (string list) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control'} (string list) info.category = 'storage' (string) info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_device_lun0' (string) info.product = 'CD/DVDW TS-L632D' (string) info.udi = '/org/freedesktop/Hal/devices/storage_model_CD/DVDW_TS_L632D' (string) info.vendor = 'TSSTcorp' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/block/sr0' (string) org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list) org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list) org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list) storage.automount_enabled_hint = true (bool) storage.bus = 'scsi' (string) storage.cdrom.bd = false (bool) storage.cdrom.bdr = false (bool) storage.cdrom.bdre = false (bool) storage.cdrom.cdr = true (bool) storage.cdrom.cdrw = true (bool) storage.cdrom.dvd = true (bool) storage.cdrom.dvdplusr = true (bool) storage.cdrom.dvdplusrdl = true (bool) storage.cdrom.dvdplusrw = true (bool) storage.cdrom.dvdplusrwdl = false (bool) storage.cdrom.dvdr = true (bool) storage.cdrom.dvdram = true (bool) storage.cdrom.dvdrw = true (bool) storage.cdrom.hddvd = false (bool) storage.cdrom.hddvdr = false (bool) storage.cdrom.hddvdrw = false (bool) storage.cdrom.mo = false (bool) storage.cdrom.mrw = true (bool) storage.cdrom.mrw_w = true (bool) storage.cdrom.read_speed = 4234 (0x108a) (int) storage.cdrom.support_media_changed = true (bool) storage.cdrom.support_multisession = true (bool) storage.cdrom.write_speed = 0 (0x0) (int) storage.cdrom.write_speeds = {} (string list) storage.drive_type = 'cdrom' (string) storage.firmware_version = 'SC03' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = true (bool) storage.model = 'CD/DVDW TS-L632D' (string) storage.no_partitions_hint = true (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = '' (string) storage.removable = true (bool) storage.removable.media_available = false (bool) storage.removable.support_async_notification = false (bool) storage.requires_eject = true (bool) storage.size = 0 (0x0) (uint64) storage.vendor = 'TSSTcorp' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/class/scsi_generic/sg1' (string) scsi_generic.device = '/dev/sg1' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4385' info.linux.driver = 'piix4_smbus' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SBx00 SMBus Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4385' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.0' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 5 (0x5) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.0' (string) pci.product = 'SBx00 SMBus Controller' (string) pci.product_id = 17285 (0x4385) (int) pci.subsys_product_id = 50449 (0xc511) (int) pci.subsys_vendor = 'Samsung Electronics Co Ltd' (string) pci.subsys_vendor_id = 5197 (0x144d) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4386' info.linux.driver = 'ehci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB600 USB Controller (EHCI)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4386' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 32 (0x20) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5' (string) pci.product = 'SB600 USB Controller (EHCI)' (string) pci.product_id = 17286 (0x4386) (int) pci.subsys_product_id = 50449 (0xc511) (int) pci.subsys_vendor = 'Samsung Electronics Co Ltd' (string) pci.subsys_vendor_id = 5197 (0x144d) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_5' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4386' (string) info.product = 'EHCI Host Controller' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_5' (string) info.vendor = 'Linux 2.6.24-17-generic ehci_hcd' (string) linux.device_file = '/dev/bus/usb/006/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6' (string) usb_device.bus_number = 6 (0x6) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 1 (0x1) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 10 (0xa) (int) usb_device.product = 'EHCI Host Controller' (string) usb_device.product_id = 0 (0x0) (int) usb_device.serial = '0000:00:13.5' (string) usb_device.speed = 480.0 (480) (double) usb_device.speed_bcd = 294912 (0x48000) (int) usb_device.vendor = 'Linux 2.6.24-17-generic ehci_hcd' (string) usb_device.vendor_id = 0 (0x0) (int) usb_device.version = 2.0 (2) (double) usb_device.version_bcd = 512 (0x200) (int) udi = '/org/freedesktop/Hal/devices/usb_device_58f_6366_058F0O1111B' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_5' (string) info.product = 'Mass Storage Device' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_58f_6366_058F0O1111B' (string) info.vendor = 'Alcor Micro Corp.' (string) linux.device_file = '/dev/bus/usb/006/004' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-6' (string) usb_device.bus_number = 6 (0x6) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 256 (0x100) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 4 (0x4) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-6' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'Mass Storage Device' (string) usb_device.product_id = 25446 (0x6366) (int) usb_device.serial = '058F0O1111B' (string) usb_device.speed = 480.0 (480) (double) usb_device.speed_bcd = 294912 (0x48000) (int) usb_device.vendor = 'Alcor Micro Corp.' (string) usb_device.vendor_id = 1423 (0x58f) (int) usb_device.version = 2.0 (2) (double) usb_device.version_bcd = 512 (0x200) (int) udi = '/org/freedesktop/Hal/devices/usb_device_58f_6366_058F0O1111B_if0' info.bus = 'usb' (string) info.linux.driver = 'usb-storage' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_58f_6366_058F0O1111B' (string) info.product = 'USB Mass Storage Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_58f_6366_058F0O1111B_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-6/6-6:1.0' (string) usb.bus_number = 6 (0x6) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 8 (0x8) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 80 (0x50) (int) usb.interface.subclass = 6 (0x6) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 4 (0x4) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-6/6-6:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Mass Storage Interface' (string) usb.product_id = 25446 (0x6366) (int) usb.serial = '058F0O1111B' (string) usb.speed = 480.0 (480) (double) usb.speed_bcd = 294912 (0x48000) (int) usb.vendor = 'Alcor Micro Corp.' (string) usb.vendor_id = 1423 (0x58f) (int) usb.version = 2.0 (2) (double) usb.version_bcd = 512 (0x200) (int) udi = '/org/freedesktop/Hal/devices/usb_device_58f_6366_058F0O1111B_if0_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_58f_6366_058F0O1111B_if0' (string) info.product = 'SCSI Host Adapter' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_58f_6366_058F0O1111B_if0_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-6/6-6:1.0/host7' (string) scsi_host.host = 7 (0x7) (int) udi = '/org/freedesktop/Hal/devices/usb_device_58f_6366_058F0O1111B_if0_scsi_host_scsi_device_lun0' info.linux.driver = 'sd' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_58f_6366_058F0O1111B_if0_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_58f_6366_058F0O1111B_if0_scsi_host_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-6/6-6:1.0/host7/target7:0:0/7:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 7 (0x7) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'Flash Reader' (string) scsi.target = 0 (0x0) (int) scsi.type = 'disk' (string) scsi.vendor = 'Multi' (string) udi = '/org/freedesktop/Hal/devices/storage_serial_Multi_Flash_Reader_058F0O1111B_0_0' block.device = '/dev/sdb' (string) block.is_volume = false (bool) block.major = 8 (0x8) (int) block.minor = 16 (0x10) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Multi_Flash_Reader_058F0O1111B_0_0' (string) info.addons = {'hald-addon-storage'} (string list) info.capabilities = {'storage', 'block'} (string list) info.category = 'storage' (string) info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list) info.parent = '/org/freedesktop/Hal/devices/usb_device_58f_6366_058F0O1111B_if0_scsi_host_scsi_device_lun0' (string) info.product = 'Flash Reader' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_Multi_Flash_Reader_058F0O1111B_0_0' (string) info.vendor = 'Multi' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/block/sdb' (string) storage.automount_enabled_hint = true (bool) storage.bus = 'usb' (string) storage.drive_type = 'disk' (string) storage.firmware_version = '1.00' (string) storage.hotpluggable = true (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = true (bool) storage.model = 'Flash Reader' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_58f_6366_058F0O1111B_if0' (string) storage.partitioning_scheme = '' (string) storage.removable = true (bool) storage.removable.media_available = false (bool) storage.removable.support_async_notification = false (bool) storage.requires_eject = false (bool) storage.serial = 'Multi_Flash_Reader_058F0O1111B-0:0' (string) storage.size = 0 (0x0) (uint64) storage.vendor = 'Multi' (string) udi = '/org/freedesktop/Hal/devices/usb_device_58f_6366_058F0O1111B_if0_scsi_host_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_58f_6366_058F0O1111B_if0_scsi_host_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_58f_6366_058F0O1111B_if0_scsi_host_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/class/scsi_generic/sg2' (string) scsi_generic.device = '/dev/sg2' (string) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_5_if0' info.bus = 'usb' (string) info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_5' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_5_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-0:1.0' (string) usb.bus_number = 6 (0x6) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 10 (0xa) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 0 (0x0) (int) usb.serial = '0000:00:13.5' (string) usb.speed = 480.0 (480) (double) usb.speed_bcd = 294912 (0x48000) (int) usb.vendor = 'Linux 2.6.24-17-generic ehci_hcd' (string) usb.vendor_id = 0 (0x0) (int) usb.version = 2.0 (2) (double) usb.version_bcd = 512 (0x200) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_438b' info.linux.driver = 'ohci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB600 USB (OHCI4)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_438b' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.4' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.4' (string) pci.product = 'SB600 USB (OHCI4)' (string) pci.product_id = 17291 (0x438b) (int) pci.subsys_product_id = 50449 (0xc511) (int) pci.subsys_vendor = 'Samsung Electronics Co Ltd' (string) pci.subsys_vendor_id = 5197 (0x144d) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_4' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_438b' (string) info.product = 'OHCI Host Controller' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_4' (string) info.vendor = 'Linux 2.6.24-17-generic ohci_hcd' (string) linux.device_file = '/dev/bus/usb/005/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.4/usb5' (string) usb_device.bus_number = 5 (0x5) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.4/usb5' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = 'OHCI Host Controller' (string) usb_device.product_id = 0 (0x0) (int) usb_device.serial = '0000:00:13.4' (string) usb_device.speed = 12.0 (12) (double) usb_device.speed_bcd = 4608 (0x1200) (int) usb_device.vendor = 'Linux 2.6.24-17-generic ohci_hcd' (string) usb_device.vendor_id = 0 (0x0) (int) usb_device.version = 1.1 (1.1) (double) usb_device.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_4_if0' info.bus = 'usb' (string) info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_4' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_4_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.4/usb5/5-0:1.0' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.4/usb5/5-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 0 (0x0) (int) usb.serial = '0000:00:13.4' (string) usb.speed = 12.0 (12) (double) usb.speed_bcd = 4608 (0x1200) (int) usb.vendor = 'Linux 2.6.24-17-generic ohci_hcd' (string) usb.vendor_id = 0 (0x0) (int) usb.version = 1.1 (1.1) (double) usb.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_438a' info.linux.driver = 'ohci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB600 USB (OHCI3)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_438a' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.3' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.3' (string) pci.product = 'SB600 USB (OHCI3)' (string) pci.product_id = 17290 (0x438a) (int) pci.subsys_product_id = 50449 (0xc511) (int) pci.subsys_vendor = 'Samsung Electronics Co Ltd' (string) pci.subsys_vendor_id = 5197 (0x144d) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_3' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_438a' (string) info.product = 'OHCI Host Controller' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_3' (string) info.vendor = 'Linux 2.6.24-17-generic ohci_hcd' (string) linux.device_file = '/dev/bus/usb/004/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.3/usb4' (string) usb_device.bus_number = 4 (0x4) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.3/usb4' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = 'OHCI Host Controller' (string) usb_device.product_id = 0 (0x0) (int) usb_device.serial = '0000:00:13.3' (string) usb_device.speed = 12.0 (12) (double) usb_device.speed_bcd = 4608 (0x1200) (int) usb_device.vendor = 'Linux 2.6.24-17-generic ohci_hcd' (string) usb_device.vendor_id = 0 (0x0) (int) usb_device.version = 1.1 (1.1) (double) usb_device.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_3_if0' info.bus = 'usb' (string) info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_3' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_3_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.3/usb4/4-0:1.0' (string) usb.bus_number = 4 (0x4) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.3/usb4/4-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 0 (0x0) (int) usb.serial = '0000:00:13.3' (string) usb.speed = 12.0 (12) (double) usb.speed_bcd = 4608 (0x1200) (int) usb.vendor = 'Linux 2.6.24-17-generic ohci_hcd' (string) usb.vendor_id = 0 (0x0) (int) usb.version = 1.1 (1.1) (double) usb.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4389' info.linux.driver = 'ohci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB600 USB (OHCI2)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4389' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2' (string) pci.product = 'SB600 USB (OHCI2)' (string) pci.product_id = 17289 (0x4389) (int) pci.subsys_product_id = 50449 (0xc511) (int) pci.subsys_vendor = 'Samsung Electronics Co Ltd' (string) pci.subsys_vendor_id = 5197 (0x144d) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4389' (string) info.product = 'OHCI Host Controller' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2' (string) info.vendor = 'Linux 2.6.24-17-generic ohci_hcd' (string) linux.device_file = '/dev/bus/usb/003/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3' (string) usb_device.bus_number = 3 (0x3) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = 'OHCI Host Controller' (string) usb_device.product_id = 0 (0x0) (int) usb_device.serial = '0000:00:13.2' (string) usb_device.speed = 12.0 (12) (double) usb_device.speed_bcd = 4608 (0x1200) (int) usb_device.vendor = 'Linux 2.6.24-17-generic ohci_hcd' (string) usb_device.vendor_id = 0 (0x0) (int) usb_device.version = 1.1 (1.1) (double) usb_device.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2_if0' info.bus = 'usb' (string) info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-0:1.0' (string) usb.bus_number = 3 (0x3) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 0 (0x0) (int) usb.serial = '0000:00:13.2' (string) usb.speed = 12.0 (12) (double) usb.speed_bcd = 4608 (0x1200) (int) usb.vendor = 'Linux 2.6.24-17-generic ohci_hcd' (string) usb.vendor_id = 0 (0x0) (int) usb.version = 1.1 (1.1) (double) usb.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4388' info.linux.driver = 'ohci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB600 USB (OHCI1)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4388' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1' (string) pci.product = 'SB600 USB (OHCI1)' (string) pci.product_id = 17288 (0x4388) (int) pci.subsys_product_id = 50449 (0xc511) (int) pci.subsys_vendor = 'Samsung Electronics Co Ltd' (string) pci.subsys_vendor_id = 5197 (0x144d) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4388' (string) info.product = 'OHCI Host Controller' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1' (string) info.vendor = 'Linux 2.6.24-17-generic ohci_hcd' (string) linux.device_file = '/dev/bus/usb/002/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = 'OHCI Host Controller' (string) usb_device.product_id = 0 (0x0) (int) usb_device.serial = '0000:00:13.1' (string) usb_device.speed = 12.0 (12) (double) usb_device.speed_bcd = 4608 (0x1200) (int) usb_device.vendor = 'Linux 2.6.24-17-generic ohci_hcd' (string) usb_device.vendor_id = 0 (0x0) (int) usb_device.version = 1.1 (1.1) (double) usb_device.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/usb_device_45e_d2_noserial' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1' (string) info.product = 'Microsoft Notebook Optical Mouse with Tilt Wheel' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_45e_d2_noserial' (string) info.vendor = 'Microsoft Corp.' (string) linux.device_file = '/dev/bus/usb/002/003' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2/2-1' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 288 (0x120) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 3 (0x3) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2/2-1' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'Microsoft Notebook Optical Mouse with Tilt Wheel' (string) usb_device.product_id = 210 (0xd2) (int) usb_device.speed = 1.5 (1.5) (double) usb_device.speed_bcd = 336 (0x150) (int) usb_device.vendor = 'Microsoft Corp.' (string) usb_device.vendor_id = 1118 (0x45e) (int) usb_device.version = 2.0 (2) (double) usb_device.version_bcd = 512 (0x200) (int) udi = '/org/freedesktop/Hal/devices/usb_device_45e_d2_noserial_if0' info.bus = 'usb' (string) info.linux.driver = 'usbhid' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_45e_d2_noserial' (string) info.product = 'USB HID Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_45e_d2_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2/2-1/2-1:1.0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 288 (0x120) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 3 (0x3) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 2 (0x2) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 3 (0x3) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2/2-1/2-1:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB HID Interface' (string) usb.product_id = 210 (0xd2) (int) usb.speed = 1.5 (1.5) (double) usb.speed_bcd = 336 (0x150) (int) usb.vendor = 'Microsoft Corp.' (string) usb.vendor_id = 1118 (0x45e) (int) usb.version = 2.0 (2) (double) usb.version_bcd = 512 (0x200) (int) udi = '/org/freedesktop/Hal/devices/usb_device_45e_d2_noserial_if0_logicaldev_input' info.capabilities = {'input', 'input.mouse'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_45e_d2_noserial_if0' (string) info.product = 'Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_45e_d2_noserial_if0_logicaldev_input' (string) input.device = '/dev/input/event4' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_45e_d2_noserial_if0' (string) input.product = 'Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel' (string) linux.device_file = '/dev/input/event4' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2/2-1/2-1:1.0/input/input7/event4' (string) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1_if0' info.bus = 'usb' (string) info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2/2-0:1.0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2/2-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 0 (0x0) (int) usb.serial = '0000:00:13.1' (string) usb.speed = 12.0 (12) (double) usb.speed_bcd = 4608 (0x1200) (int) usb.vendor = 'Linux 2.6.24-17-generic ohci_hcd' (string) usb.vendor_id = 0 (0x0) (int) usb.version = 1.1 (1.1) (double) usb.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4387' info.linux.driver = 'ohci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB600 USB (OHCI0)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4387' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0' (string) pci.product = 'SB600 USB (OHCI0)' (string) pci.product_id = 17287 (0x4387) (int) pci.subsys_product_id = 50449 (0xc511) (int) pci.subsys_vendor = 'Samsung Electronics Co Ltd' (string) pci.subsys_vendor_id = 5197 (0x144d) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4387' (string) info.product = 'OHCI Host Controller' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0' (string) info.vendor = 'Linux 2.6.24-17-generic ohci_hcd' (string) linux.device_file = '/dev/bus/usb/001/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = 'OHCI Host Controller' (string) usb_device.product_id = 0 (0x0) (int) usb_device.serial = '0000:00:13.0' (string) usb_device.speed = 12.0 (12) (double) usb_device.speed_bcd = 4608 (0x1200) (int) usb_device.vendor = 'Linux 2.6.24-17-generic ohci_hcd' (string) usb_device.vendor_id = 0 (0x0) (int) usb_device.version = 1.1 (1.1) (double) usb_device.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/usb_device_45e_db_noserial' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0' (string) info.product = 'Natural Ergonomic Keyboard 4000 V1.0' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_45e_db_noserial' (string) info.vendor = 'Microsoft Corp.' (string) linux.device_file = '/dev/bus/usb/001/003' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1/1-1' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 371 (0x173) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 3 (0x3) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1/1-1' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 2 (0x2) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'Natural Ergonomic Keyboard 4000 V1.0' (string) usb_device.product_id = 219 (0xdb) (int) usb_device.speed = 1.5 (1.5) (double) usb_device.speed_bcd = 336 (0x150) (int) usb_device.vendor = 'Microsoft Corp.' (string) usb_device.vendor_id = 1118 (0x45e) (int) usb_device.version = 2.0 (2) (double) usb_device.version_bcd = 512 (0x200) (int) udi = '/org/freedesktop/Hal/devices/usb_device_45e_db_noserial_if1' info.bus = 'usb' (string) info.linux.driver = 'usbhid' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_45e_db_noserial' (string) info.product = 'USB HID Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_45e_db_noserial_if1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.1' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 371 (0x173) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 3 (0x3) (int) usb.interface.number = 1 (0x1) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 3 (0x3) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.1' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB HID Interface' (string) usb.product_id = 219 (0xdb) (int) usb.speed = 1.5 (1.5) (double) usb.speed_bcd = 336 (0x150) (int) usb.vendor = 'Microsoft Corp.' (string) usb.vendor_id = 1118 (0x45e) (int) usb.version = 2.0 (2) (double) usb.version_bcd = 512 (0x200) (int) udi = '/org/freedesktop/Hal/devices/usb_device_45e_db_noserial_if1_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_45e_db_noserial_if1' (string) info.product = 'Microsoft Natural? Ergonomic Keyboard 4000' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_45e_db_noserial_if1_logicaldev_input' (string) input.device = '/dev/input/event3' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_45e_db_noserial_if1' (string) input.product = 'Microsoft Natural? Ergonomic Keyboard 4000' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'evdev' (string) input.xkb.rules = 'base' (string) input.xkb.variant = '' (string) linux.device_file = '/dev/input/event3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.1/input/input6/event3' (string) udi = '/org/freedesktop/Hal/devices/usb_device_45e_db_noserial_if0' info.bus = 'usb' (string) info.linux.driver = 'usbhid' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_45e_db_noserial' (string) info.product = 'USB HID Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_45e_db_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 371 (0x173) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 3 (0x3) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 1 (0x1) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 3 (0x3) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB HID Interface' (string) usb.product_id = 219 (0xdb) (int) usb.speed = 1.5 (1.5) (double) usb.speed_bcd = 336 (0x150) (int) usb.vendor = 'Microsoft Corp.' (string) usb.vendor_id = 1118 (0x45e) (int) usb.version = 2.0 (2) (double) usb.version_bcd = 512 (0x200) (int) udi = '/org/freedesktop/Hal/devices/usb_device_45e_db_noserial_if0_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_45e_db_noserial_if0' (string) info.product = 'Microsoft Natural? Ergonomic Keyboard 4000' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_45e_db_noserial_if0_logicaldev_input' (string) input.device = '/dev/input/event2' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_45e_db_noserial_if0' (string) input.product = 'Microsoft Natural? Ergonomic Keyboard 4000' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'evdev' (string) input.xkb.rules = 'base' (string) input.xkb.variant = '' (string) linux.device_file = '/dev/input/event2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0/input/input5/event2' (string) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0_if0' info.bus = 'usb' (string) info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1/1-0:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1/1-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 0 (0x0) (int) usb.serial = '0000:00:13.0' (string) usb.speed = 12.0 (12) (double) usb.speed_bcd = 4608 (0x1200) (int) usb.vendor = 'Linux 2.6.24-17-generic ohci_hcd' (string) usb.vendor_id = 0 (0x0) (int) usb.version = 1.1 (1.1) (double) usb.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4380' info.linux.driver = 'ahci' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB600 Non-Raid-5 SATA' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4380' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0' (string) pci.device_class = 1 (0x1) (int) pci.device_protocol = 1 (0x1) (int) pci.device_subclass = 6 (0x6) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0' (string) pci.product = 'SB600 Non-Raid-5 SATA' (string) pci.product_id = 17280 (0x4380) (int) pci.subsys_product_id = 50449 (0xc511) (int) pci.subsys_vendor = 'Samsung Electronics Co Ltd' (string) pci.subsys_vendor_id = 5197 (0x144d) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4380' (string) info.product = 'SCSI Host Adapter' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0/host0' (string) scsi_host.host = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_scsi_device_lun0' info.linux.driver = 'sd' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 0 (0x0) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'SAMSUNG HM120JI' (string) scsi.target = 0 (0x0) (int) scsi.type = 'disk' (string) scsi.vendor = 'ATA' (string) udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HM120JI_S0UWJD0P400853' block.device = '/dev/sda' (string) block.is_volume = false (bool) block.major = 8 (0x8) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HM120JI_S0UWJD0P400853' (string) info.capabilities = {'storage', 'block'} (string list) info.category = 'storage' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_scsi_device_lun0' (string) info.product = 'SAMSUNG HM120JI' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HM120JI_S0UWJD0P400853' (string) info.vendor = 'ATA' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/block/sda' (string) storage.automount_enabled_hint = false (bool) storage.bus = 'scsi' (string) storage.drive_type = 'disk' (string) storage.firmware_version = 'YF10' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = false (bool) storage.model = 'SAMSUNG HM120JI' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = 'mbr' (string) storage.removable = false (bool) storage.removable.media_available = true (bool) storage.removable.media_size = 120034123776 (0x1bf2976000) (uint64) storage.requires_eject = false (bool) storage.serial = '1ATA_SAMSUNG_HM120JI_S0UWJD0P400853' (string) storage.size = 120034123776 (0x1bf2976000) (uint64) storage.vendor = 'ATA' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_09ce5624_daae_4983_ba0b_e17220ea0d86' block.device = '/dev/sda6' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 6 (0x6) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HM120JI_S0UWJD0P400853' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HM120JI_S0UWJD0P400853' (string) info.product = 'Volume (ext3)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_09ce5624_daae_4983_ba0b_e17220ea0d86' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/block/sda/sda6' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'ext3' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/home' (string) volume.num_blocks = 148536864 (0x8da7e20) (int) volume.partition.media_size = 120034123776 (0x1bf2976000) (uint64) volume.partition.number = 6 (0x6) (int) volume.partition.start = 40098304512 (0x9560b9200) (uint64) volume.size = 76050874368 (0x11b4fc4000) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = '09ce5624-daae-4983-ba0b-e17220ea0d86' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_0277e21d_5c98_470e_83c4_1e213e3739d2' block.device = '/dev/sda5' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 5 (0x5) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HM120JI_S0UWJD0P400853' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HM120JI_S0UWJD0P400853' (string) info.product = 'Volume (swap)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_0277e21d_5c98_470e_83c4_1e213e3739d2' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/block/sda/sda5' (string) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'swap' (string) volume.fsusage = 'other' (string) volume.fsversion = '2' (string) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount_point = '' (string) volume.num_blocks = 7582617 (0x73b399) (int) volume.partition.media_size = 120034123776 (0x1bf2976000) (uint64) volume.partition.number = 5 (0x5) (int) volume.partition.start = 116149211136 (0x1b0b085000) (uint64) volume.size = 3882299904 (0xe7673200) (uint64) volume.uuid = '0277e21d-5c98-470e-83c4-1e213e3739d2' (string) udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024' block.device = '/dev/sda2' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 2 (0x2) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HM120JI_S0UWJD0P400853' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HM120JI_S0UWJD0P400853' (string) info.product = 'Volume' (string) info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/block/sda/sda2' (string) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = '' (string) volume.fsusage = '' (string) volume.fsversion = '' (string) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount_point = '' (string) volume.num_blocks = 2 (0x2) (int) volume.partition.media_size = 120034123776 (0x1bf2976000) (uint64) volume.partition.number = 2 (0x2) (int) volume.partition.start = 40098240000 (0x9560a9600) (uint64) volume.size = 1024 (0x400) (uint64) volume.uuid = '' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_bab9dd82_0a23_4d9a_9062_eb67a6a1f0d8' block.device = '/dev/sda1' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 1 (0x1) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HM120JI_S0UWJD0P400853' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HM120JI_S0UWJD0P400853' (string) info.product = 'Volume (ext3)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_bab9dd82_0a23_4d9a_9062_eb67a6a1f0d8' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/block/sda/sda1' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'ext3' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/' (string) volume.num_blocks = 78316812 (0x4ab050c) (int) volume.partition.flags = {'boot'} (string list) volume.partition.label = '' (string) volume.partition.media_size = 120034123776 (0x1bf2976000) (uint64) volume.partition.number = 1 (0x1) (int) volume.partition.scheme = 'mbr' (string) volume.partition.start = 32256 (0x7e00) (uint64) volume.partition.type = '0x83' (string) volume.partition.uuid = '' (string) volume.size = 40098207744 (0x9560a1800) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = 'bab9dd82-0a23-4d9a-9062-eb67a6a1f0d8' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/class/scsi_generic/sg0' (string) scsi_generic.device = '/dev/sg0' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_7936' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Unknown (0x7936)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_7936' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0' (string) pci.product_id = 31030 (0x7936) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pci_168c_1c' info.linux.driver = 'ath_pci' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_7936' (string) info.product = 'AR242x 802.11abg Wireless PCI Express Adapter' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_168c_1c' (string) info.vendor = 'Atheros Communications Inc.' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/0000:05:00.0' (string) pci.device_class = 2 (0x2) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/0000:05:00.0' (string) pci.product = 'AR242x 802.11abg Wireless PCI Express Adapter' (string) pci.product_id = 28 (0x1c) (int) pci.subsys_product_id = 28936 (0x7108) (int) pci.subsys_vendor = 'Askey Computer Corp.' (string) pci.subsys_vendor_id = 5199 (0x144f) (int) pci.vendor = 'Atheros Communications Inc.' (string) pci.vendor_id = 5772 (0x168c) (int) udi = '/org/freedesktop/Hal/devices/net_00_1b_9e_07_fa_d7_0' info.capabilities = {'net', 'net.80211control'} (string list) info.category = 'net.80211control' (string) info.parent = '/org/freedesktop/Hal/devices/pci_168c_1c' (string) info.product = 'Networking Wireless Control Interface' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_1b_9e_07_fa_d7_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/0000:05:00.0/net/wifi0' (string) net.address = '00:1b:9e:07:fa:d7' (string) net.arp_proto_hw_id = 801 (0x321) (int) net.interface = 'wifi0' (string) net.linux.ifindex = 3 (0x3) (int) net.originating_device = '/org/freedesktop/Hal/devices/pci_168c_1c' (string) net.physical_device = '/org/freedesktop/Hal/devices/pci_168c_1c' (string) udi = '/org/freedesktop/Hal/devices/net_00_1b_9e_07_fa_d7' info.capabilities = {'net', 'net.80211'} (string list) info.category = 'net.80211' (string) info.parent = '/org/freedesktop/Hal/devices/pci_168c_1c' (string) info.product = 'WLAN Interface' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_1b_9e_07_fa_d7' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/0000:05:00.0/net/ath0' (string) net.80211.mac_address = 118615440087 (0x1b9e07fad7) (uint64) net.address = '00:1b:9e:07:fa:d7' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'ath0' (string) net.linux.ifindex = 4 (0x4) (int) net.originating_device = '/org/freedesktop/Hal/devices/pci_168c_1c' (string) net.physical_device = '/org/freedesktop/Hal/devices/pci_168c_1c' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_7935' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Unknown (0x7935)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_7935' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0' (string) pci.product_id = 31029 (0x7935) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_7932' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Unknown (0x7932)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_7932' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string) pci.product_id = 31026 (0x7932) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_7942' info.linux.driver = 'fglrx_pci' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_7932' (string) info.product = 'Radeon Xpress 1250' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_7942' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:05.0' (string) pci.device_class = 3 (0x3) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:05.0' (string) pci.product = 'Radeon Xpress 1250' (string) pci.product_id = 31042 (0x7942) (int) pci.subsys_product_id = 50449 (0xc511) (int) pci.subsys_vendor = 'Samsung Electronics Co Ltd' (string) pci.subsys_vendor_id = 5197 (0x144d) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_7930' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Unknown (0x7930)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_7930' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.product_id = 31024 (0x7930) (int) pci.subsys_product_id = 50449 (0xc511) (int) pci.subsys_vendor = 'Samsung Electronics Co Ltd' (string) pci.subsys_vendor_id = 5197 (0x144d) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) Dumped 112 device(s) from the Global Device List. ------------------------------------------------