Do I have to downgrade my system from Dingo to Cosmic in order to test this in Cosmic, to keep my bug from being closed?

May 20, 2019 7:02 AM, "Ubuntu Kernel Bot" <email address hidden> wrote:

> This bug is awaiting verification that the kernel in -proposed solves
> the problem. Please test the kernel and update this bug with the
> results. If the problem is solved, change the tag 'verification-needed-
> cosmic' to 'verification-done-cosmic'. If the problem still exists,
> change the tag 'verification-needed-cosmic' to 'verification-failed-
> cosmic'.
> 
> If verification is not done by 5 working days from today, this fix will
> be dropped from the source code, and this bug will be closed.
> 
> See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how
> to enable and use -proposed. Thank you!
> 
> ** Tags added: verification-needed-cosmic
> 
> -- 
> You received this bug notification because you are subscribed to the bug
> report.
> https://bugs.launchpad.net/bugs/1824259
> 
> Title:
> Headphone jack switch sense is inverted: plugging in headphones
> disables headphone output
> 
> Status in linux package in Ubuntu:
> Fix Committed
> Status in linux source package in Bionic:
> Fix Committed
> Status in linux source package in Cosmic:
> Fix Committed
> Status in linux source package in Disco:
> Fix Committed
> 
> Bug description:
> [Impact]
> On the LattePanda board, the headphone detection signal is not correct, it is
> inverted: plugging in headphones disables headphone output
> 
> [Fix]
> In the codec driver, there already is a fixup, just set the inv_jd1_1 to true.
> 
> [Test Case]
> It is tested by the bug reporter, please refer to:
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1824259/comments/23
> 
> [Regression Risk]
> Low. This fix is specific to a board which is defined by DMI strings.
> 
> My machine is a LattePanda board, which uses a "chtrt5645" device as a sound card. It has a single
> headphone output jack, which I think is a TRRS jack, with a mic input, such as is normally used on
> phones.
> 
> When I don't have headphones plugged in, the system thinks headphones
> *are* plugged in. Gnome Control Center shows my audio device as being
> headphones. If I insert a headphone connector partway into the jack, I
> can even get sound in the headphones.
> 
> But if I plug the headphones all the way in, the system decided that I
> have *un*plugged the headphones, and switches output over to
> "Speaker". The system doesn't actually have a speaker, only a
> headphone jack. And when the system switches over to "Speaker", I get
> no sound out of the headphones, even if I open "pavucontrol" and swap
> over to "Headphones (unplugged)" on the "Output Devices" tab.
> 
> This is what "pacmd"'s "list-cards" command says with my headphones
> *unplugged*:
> 
> 2 card(s) available.
> index: 0
> name: <alsa_card.pci-0000_00_02.0-platform-hdmi-lpe-audio>
> driver: <module-alsa-card.c>
> owner module: 7
> properties:
> alsa.card = "1"
> alsa.card_name = "Intel HDMI/DP LPE Audio"
> alsa.long_card_name = "Intel HDMI/DP LPE Audio"
> alsa.driver_name = "snd_hdmi_lpe_audio"
> device.bus_path = "pci-0000:00:02.0-platform-hdmi-lpe-audio"
> sysfs.path = "/devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card1"
> device.bus = "pci"
> device.vendor.id = "8086"
> device.vendor.name = "Intel Corporation"
> device.product.id = "22b0"
> device.product.name = "Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration
> Registers"
> device.string = "1"
> device.description = "Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration
> Registers"
> module-udev-detect.discovered = "1"
> device.icon_name = "audio-card-pci"
> profiles:
> output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
> output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
> output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
> output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
> output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
> output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
> output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
> output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
> output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
> off: Off (priority 0, available: unknown)
> active profile: <off>
> ports:
> hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
> properties:
> device.icon_name = "video-display"
> hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
> properties:
> device.icon_name = "video-display"
> hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
> properties:
> device.icon_name = "video-display"
> index: 1
> name: <alsa_card.platform-cht-bsw-rt5645>
> driver: <module-alsa-card.c>
> owner module: 8
> properties:
> alsa.card = "0"
> alsa.card_name = "chtrt5645"
> alsa.long_card_name = "AMICorporation-Defaultstring-Defaultstring-CherryTrailCR"
> alsa.driver_name = "snd_soc_sst_cht_bsw_rt5645"
> device.bus_path = "platform-cht-bsw-rt5645"
> sysfs.path = "/devices/pci0000:00/808622A8:00/cht-bsw-rt5645/sound/card0"
> device.form_factor = "internal"
> device.string = "0"
> device.description = "Built-in Audio"
> module-udev-detect.discovered = "1"
> device.icon_name = "audio-card"
> profiles:
> HiFi: Default (priority 8000, available: unknown)
> off: Off (priority 0, available: unknown)
> active profile: <HiFi>
> sinks:
> alsa_output.platform-cht-bsw-rt5645.HiFi__hw_chtrt5645__sink/#0: Built-in Audio Headphones +
> Speaker
> sources:
> alsa_output.platform-cht-bsw-rt5645.HiFi__hw_chtrt5645__sink.monitor/#0: Monitor of Built-in Audio
> Headphones + Speaker
> alsa_input.platform-cht-bsw-rt5645.HiFi__hw_chtrt5645__source/#1: Built-in Audio Headset Microphone
> + Internal Analog Microphone
> ports:
> [Out] Headphones: Headphones (priority 100, latency offset 0 usec, available: yes)
> properties:
> 
> [Out] Speaker: Speaker (priority 100, latency offset 0 usec, available: no)
> properties:
> 
> [In] HSMic: Headset Microphone (priority 100, latency offset 0 usec, available: yes)
> properties:
> 
> [In] Mic: Internal Analog Microphone (priority 150, latency offset 0 usec, available: no)
> properties:
> 
> When I plug in the headphones, the entry for card 1 changes to:
> 
> index: 1
> name: <alsa_card.platform-cht-bsw-rt5645>
> driver: <module-alsa-card.c>
> owner module: 8
> properties:
> alsa.card = "0"
> alsa.card_name = "chtrt5645"
> alsa.long_card_name = "AMICorporation-Defaultstring-Defaultstring-CherryTrailCR"
> alsa.driver_name = "snd_soc_sst_cht_bsw_rt5645"
> device.bus_path = "platform-cht-bsw-rt5645"
> sysfs.path = "/devices/pci0000:00/808622A8:00/cht-bsw-rt5645/sound/card0"
> device.form_factor = "internal"
> device.string = "0"
> device.description = "Built-in Audio"
> module-udev-detect.discovered = "1"
> device.icon_name = "audio-card"
> profiles:
> HiFi: Default (priority 8000, available: unknown)
> off: Off (priority 0, available: unknown)
> active profile: <HiFi>
> sinks:
> alsa_output.platform-cht-bsw-rt5645.HiFi__hw_chtrt5645__sink/#0: Built-in Audio Headphones +
> Speaker
> sources:
> alsa_output.platform-cht-bsw-rt5645.HiFi__hw_chtrt5645__sink.monitor/#0: Monitor of Built-in Audio
> Headphones + Speaker
> alsa_input.platform-cht-bsw-rt5645.HiFi__hw_chtrt5645__source/#1: Built-in Audio Headset Microphone
> + Internal Analog Microphone
> ports:
> [Out] Headphones: Headphones (priority 100, latency offset 0 usec, available: no)
> properties:
> 
> [Out] Speaker: Speaker (priority 100, latency offset 0 usec, available: unknown)
> properties:
> 
> [In] HSMic: Headset Microphone (priority 100, latency offset 0 usec, available: no)
> properties:
> 
> [In] Mic: Internal Analog Microphone (priority 150, latency offset 0 usec, available: unknown)
> properties:
> 
> Note that the "Headphones" port is now "available: no".
> 
> PulseAudio is getting all these ports from Alsa's UCM (Use Case
> Manager) system, which has a bunch of config files that live in
> /usr/share/alsa/ucm. I tried editing
> /usr/share/alsa/ucm/chtrt5645/HiFi.conf to swap the enable and disable
> procedures for the headphones and the speakers, in hopes of convincing
> it to route audio out the headphone jack, but that didn't work.
> 
> This problem has affected me since at least Ubuntu 18.04. I've
> upgraded through 18.10 and to 19.04 today. All three releases have the
> same problem.
> 
> 1. How is the PulseAudio/ALSA system determining whether headphones
> are plugged in or not?
> 
> 2. How do I invert the sense of that test?
> 
> ProblemType: Bug
> DistroRelease: Ubuntu 19.04
> Package: libasound2 1.1.8-1
> ProcVersionSignature: Ubuntu 5.0.0-8.9-generic 5.0.1
> Uname: Linux 5.0.0-8-generic x86_64
> ApportVersion: 2.20.10-0ubuntu26
> Architecture: amd64
> CurrentDesktop: ubuntu:GNOME
> Date: Wed Apr 10 19:21:09 2019
> InstallationDate: Installed on 2018-12-08 (123 days ago)
> InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725)
> ProcEnviron:
> TERM=xterm-256color
> PATH=(custom, no user)
> XDG_RUNTIME_DIR=<set>
> LANG=en_US.UTF-8
> SHELL=/bin/bash
> SourcePackage: alsa-lib
> UpgradeStatus: Upgraded to disco on 2019-04-11 (0 days ago)
> ---
> ProblemType: Bug
> ApportVersion: 2.20.10-0ubuntu27
> Architecture: amd64
> AudioDevicesInUse:
> USER PID ACCESS COMMAND
> /dev/snd/controlC0: anovak 3022 F.... pulseaudio
> DistroRelease: Ubuntu 19.04
> InstallationDate: Installed on 2018-12-08 (125 days ago)
> InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725)
> Lsusb:
> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 001 Device 003: ID 0bda:8152 Realtek Semiconductor Corp. RTL8152 Fast Ethernet Adapter
> Bus 001 Device 004: ID 2341:8036 Arduino SA Leonardo (CDC ACM, HID)
> Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> MachineType: Default string Default string
> Package: linux (not installed)
> ProcEnviron:
> TERM=xterm-256color
> PATH=(custom, no user)
> XDG_RUNTIME_DIR=<set>
> LANG=en_US.UTF-8
> SHELL=/bin/bash
> ProcFB: 0 inteldrmfb
> ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-8-generic
> root=UUID=a40848aa-7225-4844-805d-e726c496e2a2 ro quiet splash vt.handoff=1
> ProcVersionSignature: Ubuntu 5.0.0-8.9-generic 5.0.1
> RelatedPackageVersions:
> linux-restricted-modules-5.0.0-8-generic N/A
> linux-backports-modules-5.0.0-8-generic N/A
> linux-firmware 1.178
> RfKill:
> 0: hci0: Bluetooth
> Soft blocked: no
> Hard blocked: no
> Tags: disco
> Uname: Linux 5.0.0-8-generic x86_64
> UnreportableReason: This report is about a package that is not installed.
> UpgradeStatus: Upgraded to disco on 2019-04-11 (2 days ago)
> UserGroups: adm cdrom dip docker libvirt lpadmin plugdev pulse-access sambashare sudo
> _MarkForUpload: False
> dmi.bios.date: 05/15/2018
> dmi.bios.vendor: American Megatrends Inc.
> dmi.bios.version: DF-BI-7-S70CR200-CC55F-022-B
> dmi.board.asset.tag: Default string
> dmi.board.name: Cherry Trail CR
> dmi.board.vendor: AMI Corporation
> dmi.board.version: Default string
> dmi.chassis.asset.tag: Default string
> dmi.chassis.type: 9
> dmi.chassis.vendor: Default string
> dmi.chassis.version: Default string
> dmi.modalias:
> dmi:bvnAmericanMegatrendsInc.:bvrDF-BI-7-S70CR200-CC55F-022-B:bd05/15/2018:svnDefaultstring:pnDefaul
> string:pvrDefaultstring:rvnAMICorporation:rnCherryTrailCR:rvrDefaultstring:cvnDefaultstring:ct9:cvrD
> faultstring:
> dmi.product.family: Tablet
> dmi.product.name: Default string
> dmi.product.sku: Default string
> dmi.product.version: Default string
> dmi.sys.vendor: Default string
> 
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1824259/+subscriptions