Sent SIGTERM to all processes Sent SIGKILL to all processes [ 121.484386] kexec_core: Starting new kernel [ 137.402019250,5] OPAL: Switch to big-endian OS [ 140.374847718,5] OPAL: Switch to little-endian OS [ 0.000000] opal: OPAL detected ! [ 0.000000] radix-mmu: Page sizes from device-tree: [ 0.000000] radix-mmu: Page size shift = 12 AP=0x0 [ 0.000000] radix-mmu: Page size shift = 16 AP=0x5 [ 0.000000] radix-mmu: Page size shift = 21 AP=0x1 [ 0.000000] radix-mmu: Page size shift = 30 AP=0x2 [ 0.000000] radix-mmu: Initializing Radix MMU [ 0.000000] radix-mmu: Partition table (ptrval) [ 0.000000] radix-mmu: Mapped 0x0000000000000000-0x0000004000000000 with 1.00 GiB pages [ 0.000000] radix-mmu: Mapped 0x0000200000000000-0x0000204000000000 with 1.00 GiB pages [ 0.000000] radix-mmu: Process table (ptrval) and radix root for kernel: (ptrval) [ 0.000000] Linux version 4.15.0-21-generic (buildd@bos02-ppc64el-001) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #22~lp1770003+build.1-Ubuntu SMP Thu May 10 21:34:00 UTC 2018 (Ubuntu 4.15.0-21.22~lp1770003+build.1-generic 4.15.17) [ 0.000000] Found initrd at 0xc000000003ba0000:0xc000000007221241 [ 0.000000] OPAL: Found memory mapped LPC bus on chip 0 [ 0.000000] Using PowerNV machine description [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] CPU maps initialized for 4 threads per core [ 0.000000] ----------------------------------------------------- [ 0.000000] ppc64_pft_size = 0x0 [ 0.000000] phys_mem_size = 0x8000000000 [ 0.000000] dcache_bsize = 0x80 [ 0.000000] icache_bsize = 0x80 [ 0.000000] cpu_features = 0x000040eb8f5fb1a7 [ 0.000000] possible = 0x00007ffbfffff1af [ 0.000000] always = 0x00000000000001a0 [ 0.000000] cpu_user_features = 0xdc0065c2 0xaee00000 [ 0.000000] mmu_features = 0x3c006041 [ 0.000000] firmware_features = 0x0000000110000000 [ 0.000000] ----------------------------------------------------- [ 0.000000] cma: Reserved 26224 MiB at 0x0000203995000000 [ 0.000000] numa: NODE_DATA [mem 0x3fffff3c80-0x3fffffffff] [ 0.000000] numa: NODE_DATA [mem 0x203fff2d1c80-0x203fff2ddfff] [ 0.000000] rfi-flush: fallback displacement flush available [ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0000000) [ 0.000000] PCI host bridge /pciex@600c3c0000000 (primary) ranges: [ 0.000000] MEM 0x000600c000000000..0x000600c07ffeffff -> 0x0000000080000000 [ 0.000000] MEM 0x0006000000000000..0x0006003fffffffff -> 0x0006000000000000 (M64 #1..31) [ 0.000000] Using M64 #31 as default window [ 0.000000] 512 (511) PE's M32: 0x80000000 [segment=0x400000] [ 0.000000] M64: 0x4000000000 [segment=0x20000000] [ 0.000000] Allocated bitmap for 4088 MSIs (base IRQ 0xfe000) [ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0100000) [ 0.000000] PCI host bridge /pciex@600c3c0100000 ranges: [ 0.000000] MEM 0x000600c080000000..0x000600c0fffeffff -> 0x0000000080000000 [ 0.000000] MEM 0x0006004000000000..0x0006007fffffffff -> 0x0006004000000000 (M64 #1..15) [ 0.000000] Using M64 #15 as default window [ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000] [ 0.000000] M64: 0x4000000000 [segment=0x40000000] [ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfd800) [ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0200000) [ 0.000000] PCI host bridge /pciex@600c3c0200000 ranges: [ 0.000000] MEM 0x000600c100000000..0x000600c17ffeffff -> 0x0000000080000000 [ 0.000000] MEM 0x0006008000000000..0x000600bfffffffff -> 0x0006008000000000 (M64 #1..15) [ 0.000000] Using M64 #15 as default window [ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000] [ 0.000000] M64: 0x4000000000 [segment=0x40000000] [ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfd000) [ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0300000) [ 0.000000] PCI host bridge /pciex@600c3c0300000 ranges: [ 0.000000] MEM 0x000600c180000000..0x000600c1fffeffff -> 0x0000000080000000 [ 0.000000] MEM 0x0006020000000000..0x0006023fffffffff -> 0x0006020000000000 (M64 #1..31) [ 0.000000] Using M64 #31 as default window [ 0.000000] 512 (511) PE's M32: 0x80000000 [segment=0x400000] [ 0.000000] M64: 0x4000000000 [segment=0x20000000] [ 0.000000] Allocated bitmap for 4088 MSIs (base IRQ 0xfc000) [ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0400000) [ 0.000000] PCI host bridge /pciex@600c3c0400000 ranges: [ 0.000000] MEM 0x000600c200000000..0x000600c27ffeffff -> 0x0000000080000000 [ 0.000000] MEM 0x0006024000000000..0x0006027fffffffff -> 0x0006024000000000 (M64 #1..15) [ 0.000000] Using M64 #15 as default window [ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000] [ 0.000000] M64: 0x4000000000 [segment=0x40000000] [ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfb800) [ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0500000) [ 0.000000] PCI host bridge /pciex@600c3c0500000 ranges: [ 0.000000] MEM 0x000600c280000000..0x000600c2fffeffff -> 0x0000000080000000 [ 0.000000] MEM 0x0006028000000000..0x000602bfffffffff -> 0x0006028000000000 (M64 #1..15) [ 0.000000] Using M64 #15 as default window [ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000] [ 0.000000] M64: 0x4000000000 [segment=0x40000000] [ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfb000) [ 0.000000] Initializing IODA2 PHB (/pciex@620c3c0000000) [ 0.000000] PCI host bridge /pciex@620c3c0000000 ranges: [ 0.000000] MEM 0x000620c000000000..0x000620c07ffeffff -> 0x0000000080000000 [ 0.000000] MEM 0x0006200000000000..0x0006203fffffffff -> 0x0006200000000000 (M64 #1..31) [ 0.000000] Using M64 #31 as default window [ 0.000000] 512 (511) PE's M32: 0x80000000 [segment=0x400000] [ 0.000000] M64: 0x4000000000 [segment=0x20000000] [ 0.000000] Allocated bitmap for 4088 MSIs (base IRQ 0x1fe000) [ 0.000000] Initializing IODA2 PHB (/pciex@620c3c0100000) [ 0.000000] PCI host bridge /pciex@620c3c0100000 ranges: [ 0.000000] MEM 0x000620c080000000..0x000620c0fffeffff -> 0x0000000080000000 [ 0.000000] MEM 0x0006204000000000..0x0006207fffffffff -> 0x0006204000000000 (M64 #1..15) [ 0.000000] Using M64 #15 as default window [ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000] [ 0.000000] M64: 0x4000000000 [segment=0x40000000] [ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0x1fd800) [ 0.000000] Initializing IODA2 PHB (/pciex@620c3c0200000) [ 0.000000] PCI host bridge /pciex@620c3c0200000 ranges: [ 0.000000] MEM 0x000620c100000000..0x000620c17ffeffff -> 0x0000000080000000 [ 0.000000] MEM 0x0006208000000000..0x000620bfffffffff -> 0x0006208000000000 (M64 #1..15) [ 0.000000] Using M64 #15 as default window [ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000] [ 0.000000] M64: 0x4000000000 [segment=0x40000000] [ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0x1fd000) [ 0.000000] Initializing IODA2 PHB (/pciex@620c3c0300000) [ 0.000000] PCI host bridge /pciex@620c3c0300000 ranges: [ 0.000000] MEM 0x000620c180000000..0x000620c1fffeffff -> 0x0000000080000000 [ 0.000000] MEM 0x0006220000000000..0x0006223fffffffff -> 0x0006220000000000 (M64 #1..31) [ 0.000000] Using M64 #31 as default window [ 0.000000] 512 (511) PE's M32: 0x80000000 [segment=0x400000] [ 0.000000] M64: 0x4000000000 [segment=0x20000000] [ 0.000000] Allocated bitmap for 4088 MSIs (base IRQ 0x1fc000) [ 0.000000] OPAL nvram setup, 589824 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000203fffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000003fffffffff] [ 0.000000] node 8: [mem 0x0000200000000000-0x0000203fffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000003fffffffff] [ 0.000000] Initmem setup node 8 [mem 0x0000200000000000-0x0000203fffffffff] [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 4 pages/cpu @ (ptrval) s171032 r0 d91112 u262144 [ 0.000000] Built 2 zonelists, mobility grouping on. Total pages: 8380416 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: root=UUID=8dd94e94-015c-43ed-9ab8-d83a6e560675 ro qla2xxx.logging=0x1e400000 [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 520192 bytes [ 0.000000] log_buf_len min size: 131072 bytes [ 0.000000] log_buf_len: 1048576 bytes [ 0.000000] early log buf free: 119260(90%) [ 0.000000] Memory: 509054848K/536870912K available (13376K kernel code, 2048K rwdata, 3648K rodata, 4800K init, 3038K bss, 962688K reserved, 26853376K cma-reserved) [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=128, Nodes=9 [ 0.000000] ftrace: allocating 34852 entries in 13 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=2048 to nr_cpu_ids=128. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=128 [ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 [ 0.000000] xive: Interrupt handling initialized with native backend [ 0.000000] xive: Using priority 7 for all interrupts [ 0.000000] xive: Using 64kB queues [ 0.000003] time_init: 56 bit decrementer (max: 7fffffffffffff) [ 0.004173] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x761537d007, max_idle_ns: 440795202126 ns [ 0.015204] clocksource: timebase mult[1f40000] shift[24] registered [ 0.021009] Console: colour dummy device 80x25 [ 0.025254] console [hvc0] enabled [ 0.025254] console [hvc0] enabled [ 0.031917] bootconsole [udbg0] disabled [ 0.031917] bootconsole [udbg0] disabled [ 0.040470] mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl [ 0.051263] pid_max: default: 131072 minimum: 1024 [ 0.057401] Security Framework initialized [ 0.060045] Yama: becoming mindful. [ 0.064681] AppArmor: AppArmor initialized [ 0.082448] Dentry cache hash table entries: 16777216 (order: 11, 134217728 bytes) [ 0.094931] Inode-cache hash table entries: 8388608 (order: 10, 67108864 bytes) [ 0.100806] Mount-cache hash table entries: 262144 (order: 5, 2097152 bytes) [ 0.107527] Mountpoint-cache hash table entries: 262144 (order: 5, 2097152 bytes) [ 0.117365] EEH: PowerNV platform initialized [ 0.120025] POWER9 performance monitor hardware support registered [ 0.125618] Hierarchical SRCU implementation. [ 0.133162] smp: Bringing up secondary CPUs ... [ 0.502021] smp: Brought up 2 nodes, 128 CPUs [ 0.504687] numa: Node 0 CPUs: 0-63 [ 0.507456] numa: Node 8 CPUs: 64-127 [ 0.511617] Using shared cache scheduler topology [ 0.536945] devtmpfs: initialized [ 0.581778] evm: security.selinux [ 0.583044] evm: security.SMACK64 [ 0.587198] evm: security.SMACK64EXEC [ 0.589973] evm: security.SMACK64TRANSMUTE [ 0.594133] evm: security.SMACK64MMAP [ 0.598295] evm: security.apparmor [ 0.601072] evm: security.ima [ 0.603851] evm: security.capability [ 0.609064] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.617753] futex hash table entries: 32768 (order: 6, 4194304 bytes) [ 0.633590] pinctrl core: initialized pinctrl subsystem [ 0.638242] NET: Registered protocol family 16 [ 0.641937] EEH: No capable adapters found [ 0.646201] audit: initializing netlink subsys (disabled) [ 0.651625] audit: type=2000 audit(1526045903.572:1): state=initialized audit_enabled=0 res=1 [ 0.659860] cpuidle: using governor ladder [ 0.664148] cpuidle: using governor menu [ 0.668482] pstore: using zlib compression [ 0.672315] pstore: Registered nvram as persistent store backend [ 0.733115] PCI: Probing PCI hardware [ 0.733207] PCI host bridge to bus 0000:00 [ 0.733239] pci_bus 0000:00: root bus resource [mem 0x600c000000000-0x600c07ffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.733320] pci_bus 0000:00: root bus resource [mem 0x6000000000000-0x6003fbfffffff 64bit pref] [ 0.733379] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.733538] pci 0000:00:00.0: Disabling memory decoding and releasing memory resources. [ 0.733592] pci 0000:00:00.0: disabling bridge mem windows [ 0.734111] pci 0000:01:00.0: Disabling memory decoding and releasing memory resources. [ 0.734404] pci 0000:01:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0007ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.743082] pci 0000:01:00.0: VF(n) BAR4 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR4 for 8 VFs) [ 0.752836] pci 0000:01:00.0: VF BAR0: [mem 0x00000000-0x01ffffff 64bit pref] (expanded to 512 VFs for PE alignment) [ 0.763835] pci 0000:01:00.0: VF BAR4: [mem 0x00000000-0x03ffffff 64bit pref] (expanded to 512 VFs for PE alignment) [ 0.773825] pci 0000:01:00.1: Disabling memory decoding and releasing memory resources. [ 0.782086] pci 0000:01:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0007ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.791623] pci 0000:01:00.1: VF(n) BAR4 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR4 for 8 VFs) [ 0.802748] pci 0000:01:00.1: VF BAR0: [mem 0x00000000-0x01ffffff 64bit pref] (expanded to 512 VFs for PE alignment) [ 0.812381] pci 0000:01:00.1: VF BAR4: [mem 0x00000000-0x03ffffff 64bit pref] (expanded to 512 VFs for PE alignment) [ 0.823738] pci 0000:01:00.2: Disabling memory decoding and releasing memory resources. [ 0.830627] pci 0000:01:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0007ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.841534] pci 0000:01:00.2: VF(n) BAR4 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR4 for 8 VFs) [ 0.851293] pci 0000:01:00.2: VF BAR0: [mem 0x00000000-0x01ffffff 64bit pref] (expanded to 512 VFs for PE alignment) [ 0.862295] pci 0000:01:00.2: VF BAR4: [mem 0x00000000-0x03ffffff 64bit pref] (expanded to 512 VFs for PE alignment) [ 0.872281] pci 0000:01:00.3: Disabling memory decoding and releasing memory resources. [ 0.880545] pci 0000:01:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0007ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.890079] pci 0000:01:00.3: VF(n) BAR4 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR4 for 8 VFs) [ 0.901213] pci 0000:01:00.3: VF BAR0: [mem 0x00000000-0x01ffffff 64bit pref] (expanded to 512 VFs for PE alignment) [ 0.910833] pci 0000:01:00.3: VF BAR4: [mem 0x00000000-0x03ffffff 64bit pref] (expanded to 512 VFs for PE alignment) [ 0.922001] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.926570] PCI host bridge to bus 0001:00 [ 0.930246] pci_bus 0001:00: root bus resource [mem 0x600c080000000-0x600c0fffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.941338] pci_bus 0001:00: root bus resource [mem 0x6004000000000-0x6007f7fffffff 64bit pref] [ 0.949664] pci_bus 0001:00: root bus resource [bus 00-ff] [ 0.955308] pci 0001:00:00.0: Disabling memory decoding and releasing memory resources. [ 0.963525] pci 0001:00:00.0: disabling bridge mem windows [ 0.969480] pci 0001:01:00.0: Disabling memory decoding and releasing memory resources. [ 0.977397] pci 0001:01:00.0: disabling bridge mem windows [ 0.983391] pci 0001:01:00.1: Disabling memory decoding and releasing memory resources. [ 0.989883] pci 0001:01:00.1: BAR0 [mem size 0x00002000]: requesting alignment to 0x10000 [ 0.998539] pci 0001:01:00.2: Disabling memory decoding and releasing memory resources. [ 1.006517] pci 0001:01:00.2: BAR0 [mem size 0x00002000]: requesting alignment to 0x10000 [ 1.015191] pci 0001:01:00.3: Disabling memory decoding and releasing memory resources. [ 1.023156] pci 0001:01:00.3: BAR0 [mem size 0x00002000]: requesting alignment to 0x10000 [ 1.031827] pci 0001:01:00.4: Disabling memory decoding and releasing memory resources. [ 1.038419] pci 0001:01:00.4: BAR0 [mem size 0x00002000]: requesting alignment to 0x10000 [ 1.046915] pci 0001:00:00.0: PCI bridge to [bus 01-09] [ 1.052727] pci 0001:02:01.0: Disabling memory decoding and releasing memory resources. [ 1.060600] pci 0001:02:01.0: disabling bridge mem windows [ 1.066547] pci 0001:02:08.0: Disabling memory decoding and releasing memory resources. [ 1.073088] pci 0001:02:08.0: disabling bridge mem windows [ 1.079024] pci 0001:02:09.0: Disabling memory decoding and releasing memory resources. [ 1.086945] pci 0001:02:09.0: disabling bridge mem windows [ 1.092759] pci 0001:01:00.0: PCI bridge to [bus 02-09] [ 1.099410] pci 0001:03:00.0: Disabling memory decoding and releasing memory resources. [ 1.106364] pci 0001:03:00.0: BAR1 [mem size 0x00004000 64bit]: requesting alignment to 0x10000 [ 1.115059] pci 0001:03:00.1: Disabling memory decoding and releasing memory resources. [ 1.123001] pci 0001:03:00.1: BAR1 [mem size 0x00004000 64bit]: requesting alignment to 0x10000 [ 1.131515] pci 0001:02:01.0: PCI bridge to [bus 03] [ 1.135674] pci 0001:02:08.0: PCI bridge to [bus 04-08] [ 1.141378] pci 0001:09:00.0: Disabling memory decoding and releasing memory resources. [ 1.149353] pci 0001:09:00.0: BAR3 [mem size 0x00008000 64bit pref]: requesting alignment to 0x10000 [ 1.157960] pci 0001:09:00.0: VF(n) BAR0 space: [mem 0x00000000-0x001fffff 64bit pref] (contains BAR0 for 32 VFs) [ 1.168803] pci 0001:09:00.0: VF(n) BAR3 space: [mem 0x00000000-0x001fffff 64bit pref] (contains BAR3 for 32 VFs) [ 1.178808] pci 0001:09:00.0: VF BAR0: [mem 0x00000000-0x00ffffff 64bit pref] (expanded to 256 VFs for PE alignment) [ 1.189558] pci 0001:09:00.0: VF BAR3: [mem 0x00000000-0x00ffffff 64bit pref] (expanded to 256 VFs for PE alignment) [ 1.199596] pci 0001:09:00.1: Disabling memory decoding and releasing memory resources. [ 1.207594] pci 0001:09:00.1: BAR3 [mem size 0x00008000 64bit pref]: requesting alignment to 0x10000 [ 1.217561] pci 0001:09:00.1: VF(n) BAR0 space: [mem 0x00000000-0x001fffff 64bit pref] (contains BAR0 for 32 VFs) [ 1.227051] pci 0001:09:00.1: VF(n) BAR3 space: [mem 0x00000000-0x001fffff 64bit pref] (contains BAR3 for 32 VFs) [ 1.237049] pci 0001:09:00.1: VF BAR0: [mem 0x00000000-0x00ffffff 64bit pref] (expanded to 256 VFs for PE alignment) [ 1.247804] pci 0001:09:00.1: VF BAR3: [mem 0x00000000-0x00ffffff 64bit pref] (expanded to 256 VFs for PE alignment) [ 1.257858] pci 0001:09:00.2: Disabling memory decoding and releasing memory resources. [ 1.265836] pci 0001:09:00.2: BAR3 [mem size 0x00008000 64bit pref]: requesting alignment to 0x10000 [ 1.275804] pci 0001:09:00.2: VF(n) BAR0 space: [mem 0x00000000-0x001fffff 64bit pref] (contains BAR0 for 32 VFs) [ 1.285295] pci 0001:09:00.2: VF(n) BAR3 space: [mem 0x00000000-0x001fffff 64bit pref] (contains BAR3 for 32 VFs) [ 1.296675] pci 0001:09:00.2: VF BAR0: [mem 0x00000000-0x00ffffff 64bit pref] (expanded to 256 VFs for PE alignment) [ 1.306055] pci 0001:09:00.2: VF BAR3: [mem 0x00000000-0x00ffffff 64bit pref] (expanded to 256 VFs for PE alignment) [ 1.317463] pci 0001:09:00.3: Disabling memory decoding and releasing memory resources. [ 1.324090] pci 0001:09:00.3: BAR3 [mem size 0x00008000 64bit pref]: requesting alignment to 0x10000 [ 1.334046] pci 0001:09:00.3: VF(n) BAR0 space: [mem 0x00000000-0x001fffff 64bit pref] (contains BAR0 for 32 VFs) [ 1.343537] pci 0001:09:00.3: VF(n) BAR3 space: [mem 0x00000000-0x001fffff 64bit pref] (contains BAR3 for 32 VFs) [ 1.354917] pci 0001:09:00.3: VF BAR0: [mem 0x00000000-0x00ffffff 64bit pref] (expanded to 256 VFs for PE alignment) [ 1.364298] pci 0001:09:00.3: VF BAR3: [mem 0x00000000-0x00ffffff 64bit pref] (expanded to 256 VFs for PE alignment) [ 1.375463] pci 0001:02:09.0: PCI bridge to [bus 09] [ 1.379770] PCI host bridge to bus 0002:00 [ 1.383704] pci_bus 0002:00: root bus resource [mem 0x600c100000000-0x600c17ffeffff] (bus address [0x80000000-0xfffeffff]) [ 1.394798] pci_bus 0002:00: root bus resource [mem 0x6008000000000-0x600bf7fffffff 64bit pref] [ 1.404501] pci_bus 0002:00: root bus resource [bus 00-ff] [ 1.408765] pci 0002:00:00.0: Disabling memory decoding and releasing memory resources. [ 1.416989] pci 0002:00:00.0: disabling bridge mem windows [ 1.422788] pci 0002:00:00.0: PCI bridge to [bus 01] [ 1.428162] PCI host bridge to bus 0003:00 [ 1.432238] pci_bus 0003:00: root bus resource [mem 0x600c180000000-0x600c1fffeffff] (bus address [0x80000000-0xfffeffff]) [ 1.443335] pci_bus 0003:00: root bus resource [mem 0x6020000000000-0x6023fbfffffff 64bit pref] [ 1.451662] pci_bus 0003:00: root bus resource [bus 00-ff] [ 1.457304] pci 0003:00:00.0: Disabling memory decoding and releasing memory resources. [ 1.465523] pci 0003:00:00.0: disabling bridge mem windows [ 1.470115] pci 0003:01:00.0: Disabling memory decoding and releasing memory resources. [ 1.478006] pci 0003:01:00.0: BAR2 [mem size 0x00000400 64bit]: requesting alignment to 0x10000 [ 1.486514] pci 0003:00:00.0: PCI bridge to [bus 01] [ 1.491997] PCI host bridge to bus 0004:00 [ 1.496028] pci_bus 0004:00: root bus resource [mem 0x600c200000000-0x600c27ffeffff] (bus address [0x80000000-0xfffeffff]) [ 1.507123] pci_bus 0004:00: root bus resource [mem 0x6024000000000-0x6027f7fffffff 64bit pref] [ 1.515448] pci_bus 0004:00: root bus resource [bus 00-ff] [ 1.521090] pci 0004:00:00.0: Disabling memory decoding and releasing memory resources. [ 1.529309] pci 0004:00:00.0: disabling bridge mem windows [ 1.535261] pci 0004:01:00.0: Disabling memory decoding and releasing memory resources. [ 1.543180] pci 0004:01:00.0: disabling bridge mem windows [ 1.547559] pci 0004:00:00.0: PCI bridge to [bus 01-02] [ 1.553222] pci 0004:02:00.0: Disabling memory decoding and releasing memory resources. [ 1.561370] pci 0004:01:00.0: PCI bridge to [bus 02] [ 1.566879] PCI host bridge to bus 0005:00 [ 1.569531] pci_bus 0005:00: root bus resource [mem 0x600c280000000-0x600c2fffeffff] (bus address [0x80000000-0xfffeffff]) [ 1.580619] pci_bus 0005:00: root bus resource [mem 0x6028000000000-0x602bf7fffffff 64bit pref] [ 1.590321] pci_bus 0005:00: root bus resource [bus 00-ff] [ 1.595974] pci 0005:00:00.0: Disabling memory decoding and releasing memory resources. [ 1.602818] pci 0005:00:00.0: disabling bridge mem windows [ 1.608781] pci 0005:01:00.0: Disabling memory decoding and releasing memory resources. [ 1.616683] pci 0005:01:00.0: BAR2 [mem size 0x00002000 64bit]: requesting alignment to 0x10000 [ 1.625208] pci 0005:00:00.0: PCI bridge to [bus 01] [ 1.630676] PCI host bridge to bus 0030:00 [ 1.634702] pci_bus 0030:00: root bus resource [mem 0x620c000000000-0x620c07ffeffff] (bus address [0x80000000-0xfffeffff]) [ 1.645796] pci_bus 0030:00: root bus resource [mem 0x6200000000000-0x6203fbfffffff 64bit pref] [ 1.654123] pci_bus 0030:00: root bus resource [bus 00-ff] [ 1.659778] pci 0030:00:00.0: Disabling memory decoding and releasing memory resources. [ 1.667991] pci 0030:00:00.0: disabling bridge mem windows [ 1.673822] pci 0030:00:00.0: PCI bridge to [bus 01-ff] [ 1.677794] PCI host bridge to bus 0031:00 [ 1.681852] pci_bus 0031:00: root bus resource [mem 0x620c080000000-0x620c0fffeffff] (bus address [0x80000000-0xfffeffff]) [ 1.692942] pci_bus 0031:00: root bus resource [mem 0x6204000000000-0x6207f7fffffff 64bit pref] [ 1.701271] pci_bus 0031:00: root bus resource [bus 00-ff] [ 1.706920] pci 0031:00:00.0: Disabling memory decoding and releasing memory resources. [ 1.715135] pci 0031:00:00.0: disabling bridge mem windows [ 1.720976] pci 0031:00:00.0: PCI bridge to [bus 01-ff] [ 1.726312] PCI host bridge to bus 0032:00 [ 1.730387] pci_bus 0032:00: root bus resource [mem 0x620c100000000-0x620c17ffeffff] (bus address [0x80000000-0xfffeffff]) [ 1.741479] pci_bus 0032:00: root bus resource [mem 0x6208000000000-0x620bf7fffffff 64bit pref] [ 1.749806] pci_bus 0032:00: root bus resource [bus 00-ff] [ 1.755471] pci 0032:00:00.0: Disabling memory decoding and releasing memory resources. [ 1.763668] pci 0032:00:00.0: disabling bridge mem windows [ 1.769685] pci 0032:01:00.0: Disabling memory decoding and releasing memory resources. [ 1.776160] pci 0032:01:00.0: disabling bridge mem windows [ 1.782238] pci 0032:01:00.1: Disabling memory decoding and releasing memory resources. [ 1.790021] pci 0032:01:00.1: BAR0 [mem size 0x00002000]: requesting alignment to 0x10000 [ 1.798746] pci 0032:01:00.2: Disabling memory decoding and releasing memory resources. [ 1.806658] pci 0032:01:00.2: BAR0 [mem size 0x00002000]: requesting alignment to 0x10000 [ 1.815387] pci 0032:01:00.3: Disabling memory decoding and releasing memory resources. [ 1.821920] pci 0032:01:00.3: BAR0 [mem size 0x00002000]: requesting alignment to 0x10000 [ 1.830642] pci 0032:01:00.4: Disabling memory decoding and releasing memory resources. [ 1.838553] pci 0032:01:00.4: BAR0 [mem size 0x00002000]: requesting alignment to 0x10000 [ 1.847084] pci 0032:00:00.0: PCI bridge to [bus 01-09] [ 1.852915] pci 0032:02:01.0: Disabling memory decoding and releasing memory resources. [ 1.859361] pci 0032:02:01.0: disabling bridge mem windows [ 1.865391] pci 0032:02:08.0: Disabling memory decoding and releasing memory resources. [ 1.873224] pci 0032:02:08.0: disabling bridge mem windows [ 1.879244] pci 0032:02:09.0: Disabling memory decoding and releasing memory resources. [ 1.887089] pci 0032:02:09.0: disabling bridge mem windows [ 1.892947] pci 0032:01:00.0: PCI bridge to [bus 02-09] [ 1.898236] pci 0032:03:00.0: Disabling memory decoding and releasing memory resources. [ 1.905453] pci 0032:02:01.0: PCI bridge to [bus 03] [ 1.910811] pci 0032:02:08.0: PCI bridge to [bus 04-08] [ 1.915180] pci 0032:09:00.0: Disabling memory decoding and releasing memory resources. [ 1.923487] pci 0032:02:09.0: PCI bridge to [bus 09] [ 1.928858] PCI host bridge to bus 0033:00 [ 1.932845] pci_bus 0033:00: root bus resource [mem 0x620c180000000-0x620c1fffeffff] (bus address [0x80000000-0xfffeffff]) [ 1.943939] pci_bus 0033:00: root bus resource [mem 0x6220000000000-0x6223fbfffffff 64bit pref] [ 1.952265] pci_bus 0033:00: root bus resource [bus 00-ff] [ 1.957933] pci 0033:00:00.0: Disabling memory decoding and releasing memory resources. [ 1.966130] pci 0033:00:00.0: disabling bridge mem windows [ 1.971147] pci 0033:01:00.0: Disabling memory decoding and releasing memory resources. [ 1.978621] pci 0033:01:00.0: BAR0 [mem size 0x00004000 64bit]: requesting alignment to 0x10000 [ 1.987349] pci 0033:00:00.0: PCI bridge to [bus 01] [ 1.992603] pci 0000:00:00.0: BAR 15: assigned [mem 0x6000000000000-0x600001fffffff 64bit pref] [ 2.000802] pci 0000:00:00.0: BAR 14: assigned [mem 0x600c000000000-0x600c0003fffff] [ 2.009125] pci 0000:01:00.0: BAR 11: assigned [mem 0x6000000000000-0x6000003ffffff 64bit pref] [ 2.017457] pci 0000:01:00.1: BAR 11: assigned [mem 0x6000004000000-0x6000007ffffff 64bit pref] [ 2.025777] pci 0000:01:00.2: BAR 11: assigned [mem 0x6000008000000-0x600000bffffff 64bit pref] [ 2.035470] pci 0000:01:00.3: BAR 11: assigned [mem 0x600000c000000-0x600000fffffff 64bit pref] [ 2.043800] pci 0000:01:00.0: BAR 7: assigned [mem 0x6000010000000-0x6000011ffffff 64bit pref] [ 2.052120] pci 0000:01:00.1: BAR 7: assigned [mem 0x6000012000000-0x6000013ffffff 64bit pref] [ 2.060439] pci 0000:01:00.2: BAR 7: assigned [mem 0x6000014000000-0x6000015ffffff 64bit pref] [ 2.068761] pci 0000:01:00.3: BAR 7: assigned [mem 0x6000016000000-0x6000017ffffff 64bit pref] [ 2.078458] pci 0000:01:00.0: BAR 0: assigned [mem 0x6000018000000-0x60000187fffff 64bit pref] [ 2.086795] pci 0000:01:00.0: BAR 2: assigned [mem 0x6000018800000-0x6000018ffffff 64bit pref] [ 2.095118] pci 0000:01:00.1: BAR 0: assigned [mem 0x6000019000000-0x60000197fffff 64bit pref] [ 2.103442] pci 0000:01:00.1: BAR 2: assigned [mem 0x6000019800000-0x6000019ffffff 64bit pref] [ 2.111762] pci 0000:01:00.2: BAR 0: assigned [mem 0x600001a000000-0x600001a7fffff 64bit pref] [ 2.121454] pci 0000:01:00.2: BAR 2: assigned [mem 0x600001a800000-0x600001affffff 64bit pref] [ 2.129785] pci 0000:01:00.3: BAR 0: assigned [mem 0x600001b000000-0x600001b7fffff 64bit pref] [ 2.138106] pci 0000:01:00.3: BAR 2: assigned [mem 0x600001b800000-0x600001bffffff 64bit pref] [ 2.146426] pci 0000:01:00.0: BAR 6: assigned [mem 0x600c000000000-0x600c00007ffff pref] [ 2.154723] pci 0000:01:00.1: BAR 6: assigned [mem 0x600c000080000-0x600c0000fffff pref] [ 2.163045] pci 0000:01:00.2: BAR 6: assigned [mem 0x600c000100000-0x600c00017ffff pref] [ 2.171362] pci 0000:01:00.3: BAR 6: assigned [mem 0x600c000180000-0x600c0001fffff pref] [ 2.178303] pci 0000:01:00.0: BAR 4: assigned [mem 0x600001c000000-0x600001c00ffff 64bit pref] [ 2.188018] pci 0000:01:00.1: BAR 4: assigned [mem 0x600001c010000-0x600001c01ffff 64bit pref] [ 2.196349] pci 0000:01:00.2: BAR 4: assigned [mem 0x600001c020000-0x600001c02ffff 64bit pref] [ 2.204668] pci 0000:01:00.3: BAR 4: assigned [mem 0x600001c030000-0x600001c03ffff 64bit pref] [ 2.212993] pci 0000:00 : [PE# 1fe] Secondary bus 0 associated with PE#1fe [ 2.220276] pci 0000:01 : [PE# 00] Secondary bus 1 associated with PE#0 [ 2.227181] pci 0000:01 : [PE# 00] Setting up 32-bit TCE table at 0..80000000 [ 2.240507] IOMMU table initialized, virtual merging enabled [ 2.240702] pci 0000:01 : [PE# 00] Setting up window#0 0..7fffffff pg=1000 [ 2.247648] pci 0000:01 : [PE# 00] Enabling 64-bit DMA bypass [ 2.253193] iommu: Adding device 0000:01:00.0 to group 0 [ 2.258730] iommu: Adding device 0000:01:00.1 to group 0 [ 2.264278] iommu: Adding device 0000:01:00.2 to group 0 [ 2.269825] iommu: Adding device 0000:01:00.3 to group 0 [ 2.275370] pci 0000:00:00.0: PCI bridge to [bus 01] [ 2.279547] pci 0000:00:00.0: bridge window [mem 0x600c000000000-0x600c07fefffff] [ 2.287852] pci 0000:00:00.0: bridge window [mem 0x6000000000000-0x6003fbff0ffff 64bit pref] [ 2.296283] pci 0001:00:00.0: BAR 15: assigned [mem 0x6004000000000-0x600403fffffff 64bit pref] [ 2.304499] pci 0001:00:00.0: BAR 14: assigned [mem 0x600c080000000-0x600c0817fffff] [ 2.312814] pci 0001:01:00.0: BAR 15: assigned [mem 0x6004000000000-0x600403fffffff 64bit pref] [ 2.321138] pci 0001:01:00.0: BAR 14: assigned [mem 0x600c080000000-0x600c080ffffff] [ 2.328070] pci 0001:01:00.0: BAR 0: assigned [mem 0x600c081000000-0x600c08103ffff] [ 2.336391] pci 0001:01:00.1: BAR 0: assigned [mem 0x600c081040000-0x600c081041fff] [ 2.343331] pci 0001:01:00.2: BAR 0: assigned [mem 0x600c081050000-0x600c081051fff] [ 2.351645] pci 0001:01:00.3: BAR 0: assigned [mem 0x600c081060000-0x600c081061fff] [ 2.358581] pci 0001:01:00.4: BAR 0: assigned [mem 0x600c081070000-0x600c081071fff] [ 2.366895] pci 0001:01:00.0: BAR 13: no space for [io size 0x2000] [ 2.372451] pci 0001:01:00.0: BAR 13: failed to assign [io size 0x2000] [ 2.379375] pci 0001:02:09.0: BAR 15: assigned [mem 0x6004000000000-0x600403fffffff 64bit pref] [ 2.389077] pci 0001:02:01.0: BAR 14: assigned [mem 0x600c080000000-0x600c0807fffff] [ 2.396025] pci 0001:02:09.0: BAR 14: assigned [mem 0x600c080800000-0x600c080ffffff] [ 2.404334] pci 0001:02:01.0: BAR 13: no space for [io size 0x1000] [ 2.409889] pci 0001:02:01.0: BAR 13: failed to assign [io size 0x1000] [ 2.416814] pci 0001:02:09.0: BAR 13: no space for [io size 0x1000] [ 2.423746] pci 0001:02:09.0: BAR 13: failed to assign [io size 0x1000] [ 2.429302] pci 0001:03:00.0: BAR 3: assigned [mem 0x600c080000000-0x600c0800fffff 64bit] [ 2.437633] pci 0001:03:00.1: BAR 3: assigned [mem 0x600c080100000-0x600c0801fffff 64bit] [ 2.445953] pci 0001:03:00.0: BAR 6: assigned [mem 0x600c080200000-0x600c08023ffff pref] [ 2.454253] pci 0001:03:00.1: BAR 6: assigned [mem 0x600c080240000-0x600c08027ffff pref] [ 2.462578] pci 0001:03:00.0: BAR 1: assigned [mem 0x600c080280000-0x600c080283fff 64bit] [ 2.470913] pci 0001:03:00.1: BAR 1: assigned [mem 0x600c080290000-0x600c080293fff 64bit] [ 2.479232] pci 0001:03:00.0: BAR 0: no space for [io size 0x0100] [ 2.484771] pci 0001:03:00.0: BAR 0: failed to assign [io size 0x0100] [ 2.491699] pci 0001:03:00.1: BAR 0: no space for [io size 0x0100] [ 2.497256] pci 0001:03:00.1: BAR 0: failed to assign [io size 0x0100] [ 2.504183] pci 0001:00 : [PE# fe] Secondary bus 0 associated with PE#fe [ 2.511451] pci 0001:03 : [PE# fd] Secondary bus 3 associated with PE#fd [ 2.518393] pci 0001:03 : [PE# fd] Setting up 32-bit TCE table at 0..80000000 [ 2.531573] pci 0001:03 : [PE# fd] Setting up window#0 0..7fffffff pg=1000 [ 2.533308] pci 0001:03 : [PE# fd] Enabling 64-bit DMA bypass [ 2.538860] iommu: Adding device 0001:03:00.0 to group 1 [ 2.544396] iommu: Adding device 0001:03:00.1 to group 1 [ 2.549942] pci 0001:02:01.0: PCI bridge to [bus 03] [ 2.554118] pci 0001:02:01.0: bridge window [mem 0x600c080000000-0x600c0807fffff] [ 2.562432] pci 0001:02:08.0: PCI bridge to [bus 04-08] [ 2.567992] pci 0001:09:00.0: BAR 7: assigned [mem 0x6004000000000-0x6004000ffffff 64bit pref] [ 2.576305] pci 0001:09:00.0: BAR 10: assigned [mem 0x6004001000000-0x6004001ffffff 64bit pref] [ 2.584625] pci 0001:09:00.1: BAR 7: assigned [mem 0x6004002000000-0x6004002ffffff 64bit pref] [ 2.592943] pci 0001:09:00.1: BAR 10: assigned [mem 0x6004003000000-0x6004003ffffff 64bit pref] [ 2.601263] pci 0001:09:00.2: BAR 7: assigned [mem 0x6004004000000-0x6004004ffffff 64bit pref] [ 2.610966] pci 0001:09:00.2: BAR 10: assigned [mem 0x6004005000000-0x6004005ffffff 64bit pref] [ 2.619290] pci 0001:09:00.3: BAR 7: assigned [mem 0x6004006000000-0x6004006ffffff 64bit pref] [ 2.627612] pci 0001:09:00.3: BAR 10: assigned [mem 0x6004007000000-0x6004007ffffff 64bit pref] [ 2.635930] pci 0001:09:00.0: BAR 0: assigned [mem 0x6004008000000-0x60040087fffff 64bit pref] [ 2.644264] pci 0001:09:00.1: BAR 0: assigned [mem 0x6004008800000-0x6004008ffffff 64bit pref] [ 2.653963] pci 0001:09:00.2: BAR 0: assigned [mem 0x6004009000000-0x60040097fffff 64bit pref] [ 2.662293] pci 0001:09:00.3: BAR 0: assigned [mem 0x6004009800000-0x6004009ffffff 64bit pref] [ 2.670615] pci 0001:09:00.0: BAR 6: assigned [mem 0x600c080800000-0x600c08087ffff pref] [ 2.678908] pci 0001:09:00.1: BAR 6: assigned [mem 0x600c080880000-0x600c0808fffff pref] [ 2.687227] pci 0001:09:00.2: BAR 6: assigned [mem 0x600c080900000-0x600c08097ffff pref] [ 2.694170] pci 0001:09:00.3: BAR 6: assigned [mem 0x600c080980000-0x600c0809fffff pref] [ 2.702483] pci 0001:09:00.0: BAR 3: assigned [mem 0x600400a000000-0x600400a007fff 64bit pref] [ 2.710828] pci 0001:09:00.1: BAR 3: assigned [mem 0x600400a010000-0x600400a017fff 64bit pref] [ 2.720527] pci 0001:09:00.2: BAR 3: assigned [mem 0x600400a020000-0x600400a027fff 64bit pref] [ 2.728854] pci 0001:09:00.3: BAR 3: assigned [mem 0x600400a030000-0x600400a037fff 64bit pref] [ 2.737195] pci 0001:09 : [PE# 00] Secondary bus 9 associated with PE#0 [ 2.744426] pci 0001:09 : [PE# 00] Setting up 32-bit TCE table at 0..80000000 [ 2.756224] pci 0001:09 : [PE# 00] Setting up window#0 0..7fffffff pg=1000 [ 2.759340] pci 0001:09 : [PE# 00] Enabling 64-bit DMA bypass [ 2.764893] iommu: Adding device 0001:09:00.0 to group 2 [ 2.770430] iommu: Adding device 0001:09:00.1 to group 2 [ 2.775975] iommu: Adding device 0001:09:00.2 to group 2 [ 2.780145] iommu: Adding device 0001:09:00.3 to group 2 [ 2.785681] pci 0001:02:09.0: PCI bridge to [bus 09] [ 2.791233] pci 0001:02:09.0: bridge window [mem 0x600c080800000-0x600c080ffffff] [ 2.798178] pci 0001:02:09.0: bridge window [mem 0x6004000000000-0x600403fffffff 64bit pref] [ 2.806500] pci 0001:02 : [PE# fc] Secondary bus 2 associated with PE#fc [ 2.815131] pci 0001:01:00.0: PCI bridge to [bus 02-09] [ 2.818982] pci 0001:01:00.0: bridge window [mem 0x600c080000000-0x600c0ffefffff] [ 2.827285] pci 0001:01:00.0: bridge window [mem 0x6004000000000-0x6007f7ff0ffff 64bit pref] [ 2.835622] pci 0001:01 : [PE# fb] Secondary bus 1 associated with PE#fb [ 2.842886] pci 0001:01 : [PE# fb] Setting up 32-bit TCE table at 0..80000000 [ 2.854693] pci 0001:01 : [PE# fb] Setting up window#0 0..7fffffff pg=1000 [ 2.857794] pci 0001:01 : [PE# fb] Enabling 64-bit DMA bypass [ 2.863349] iommu: Adding device 0001:01:00.0 to group 3 [ 2.868888] iommu: Adding device 0001:01:00.1 to group 3 [ 2.874434] iommu: Adding device 0001:01:00.2 to group 3 [ 2.878606] iommu: Adding device 0001:01:00.3 to group 3 [ 2.884146] iommu: Adding device 0001:01:00.4 to group 3 [ 2.889688] pci 0001:00:00.0: PCI bridge to [bus 01-09] [ 2.895239] pci 0001:00:00.0: bridge window [mem 0x600c080000000-0x600c0ffefffff] [ 2.902178] pci 0001:00:00.0: bridge window [mem 0x6004000000000-0x6007f7ff0ffff 64bit pref] [ 2.910577] pci 0001:01:00.0: BAR 13: no space for [io size 0x2000] [ 2.917421] pci 0001:01:00.0: BAR 13: failed to assign [io size 0x2000] [ 2.924359] pci 0001:02:01.0: BAR 13: no space for [io size 0x1000] [ 2.929912] pci 0001:02:01.0: BAR 13: failed to assign [io size 0x1000] [ 2.936835] pci 0001:02:09.0: BAR 13: no space for [io size 0x1000] [ 2.943777] pci 0001:02:09.0: BAR 13: failed to assign [io size 0x1000] [ 2.951123] pci 0001:03:00.0: BAR 0: no space for [io size 0x0100] [ 2.956259] pci 0001:03:00.0: BAR 0: failed to assign [io size 0x0100] [ 2.963183] pci 0001:03:00.1: BAR 0: no space for [io size 0x0100] [ 2.968738] pci 0001:03:00.1: BAR 0: failed to assign [io size 0x0100] [ 2.975670] pci 0001:02:01.0: PCI bridge to [bus 03] [ 2.981215] pci 0001:02:01.0: bridge window [mem 0x600c080000000-0x600c0807fffff] [ 2.988165] pci 0001:02:08.0: PCI bridge to [bus 04-08] [ 2.993727] pci 0001:02:09.0: PCI bridge to [bus 09] [ 2.997865] pci 0001:02:09.0: bridge window [mem 0x600c080800000-0x600c080ffffff] [ 3.006177] pci 0001:02:09.0: bridge window [mem 0x6004000000000-0x600403fffffff 64bit pref] [ 3.014505] pci 0001:01:00.0: PCI bridge to [bus 02-09] [ 3.020043] pci 0001:01:00.0: bridge window [mem 0x600c080000000-0x600c0ffefffff] [ 3.026989] pci 0001:01:00.0: bridge window [mem 0x6004000000000-0x6007f7ff0ffff 64bit pref] [ 3.036688] pci 0001:00:00.0: PCI bridge to [bus 01-09] [ 3.040853] pci 0001:00:00.0: bridge window [mem 0x600c080000000-0x600c0ffefffff] [ 3.049163] pci 0001:00:00.0: bridge window [mem 0x6004000000000-0x6007f7ff0ffff 64bit pref] [ 3.057573] pci 0001:01:00.0: BAR 13: no space for [io size 0x2000] [ 3.064417] pci 0001:01:00.0: BAR 13: failed to assign [io size 0x2000] [ 3.069968] pci 0001:02:01.0: BAR 13: no space for [io size 0x1000] [ 3.076893] pci 0001:02:01.0: BAR 13: failed to assign [io size 0x1000] [ 3.083831] pci 0001:02:09.0: BAR 13: no space for [io size 0x1000] [ 3.089383] pci 0001:02:09.0: BAR 13: failed to assign [io size 0x1000] [ 3.096316] pci 0001:03:00.0: BAR 0: no space for [io size 0x0100] [ 3.103242] pci 0001:03:00.0: BAR 0: failed to assign [io size 0x0100] [ 3.108799] pci 0001:03:00.1: BAR 0: no space for [io size 0x0100] [ 3.115724] pci 0001:03:00.1: BAR 0: failed to assign [io size 0x0100] [ 3.122659] pci 0001:02:01.0: PCI bridge to [bus 03] [ 3.126833] pci 0001:02:01.0: bridge window [mem 0x600c080000000-0x600c0807fffff] [ 3.135145] pci 0001:02:08.0: PCI bridge to [bus 04-08] [ 3.139341] pci 0001:02:09.0: PCI bridge to [bus 09] [ 3.144851] pci 0001:02:09.0: bridge window [mem 0x600c080800000-0x600c080ffffff] [ 3.153169] pci 0001:02:09.0: bridge window [mem 0x6004000000000-0x600403fffffff 64bit pref] [ 3.161503] pci 0001:01:00.0: PCI bridge to [bus 02-09] [ 3.165657] pci 0001:01:00.0: bridge window [mem 0x600c080000000-0x600c0ffefffff] [ 3.173968] pci 0001:01:00.0: bridge window [mem 0x6004000000000-0x6007f7ff0ffff 64bit pref] [ 3.182307] pci 0001:00:00.0: PCI bridge to [bus 01-09] [ 3.187836] pci 0001:00:00.0: bridge window [mem 0x600c080000000-0x600c0ffefffff] [ 3.194780] pci 0001:00:00.0: bridge window [mem 0x6004000000000-0x6007f7ff0ffff 64bit pref] [ 3.204555] pci 0001:01:00.0: BAR 13: no space for [io size 0x2000] [ 3.210032] pci 0001:01:00.0: BAR 13: failed to assign [io size 0x2000] [ 3.216954] pci 0001:02:01.0: BAR 13: no space for [io size 0x1000] [ 3.223886] pci 0001:02:01.0: BAR 13: failed to assign [io size 0x1000] [ 3.229447] pci 0001:02:09.0: BAR 13: no space for [io size 0x1000] [ 3.236368] pci 0001:02:09.0: BAR 13: failed to assign [io size 0x1000] [ 3.243305] pci 0001:03:00.0: BAR 0: no space for [io size 0x0100] [ 3.248857] pci 0001:03:00.0: BAR 0: failed to assign [io size 0x0100] [ 3.255787] pci 0001:03:00.1: BAR 0: no space for [io size 0x0100] [ 3.261342] pci 0001:03:00.1: BAR 0: failed to assign [io size 0x0100] [ 3.268263] pci 0001:02:01.0: PCI bridge to [bus 03] [ 3.273816] pci 0001:02:01.0: bridge window [mem 0x600c080000000-0x600c0807fffff] [ 3.280763] pci 0001:02:08.0: PCI bridge to [bus 04-08] [ 3.286321] pci 0001:02:09.0: PCI bridge to [bus 09] [ 3.291844] pci 0001:02:09.0: bridge window [mem 0x600c080800000-0x600c080ffffff] [ 3.298785] pci 0001:02:09.0: bridge window [mem 0x6004000000000-0x600403fffffff 64bit pref] [ 3.307105] pci 0001:01:00.0: PCI bridge to [bus 02-09] [ 3.312647] pci 0001:01:00.0: bridge window [mem 0x600c080000000-0x600c0ffefffff] [ 3.320962] pci 0001:01:00.0: bridge window [mem 0x6004000000000-0x6007f7ff0ffff 64bit pref] [ 3.329294] pci 0001:00:00.0: PCI bridge to [bus 01-09] [ 3.333450] pci 0001:00:00.0: bridge window [mem 0x600c080000000-0x600c0ffefffff] [ 3.341765] pci 0001:00:00.0: bridge window [mem 0x6004000000000-0x6007f7ff0ffff 64bit pref] [ 3.350095] pci_bus 0001:00: Automatically enabled pci realloc, if you have problem, try booting with pci=realloc=off [ 3.361227] pci 0002:00 : [PE# fe] Secondary bus 0 associated with PE#fe [ 3.368444] pci 0002:00:00.0: PCI bridge to [bus 01] [ 3.372321] pci 0003:00:00.0: BAR 14: assigned [mem 0x600c180000000-0x600c1803fffff] [ 3.380588] pci 0003:01:00.0: BAR 0: assigned [mem 0x600c180000000-0x600c1800fffff 64bit] [ 3.388922] pci 0003:01:00.0: BAR 6: assigned [mem 0x600c180100000-0x600c18017ffff pref] [ 3.397229] pci 0003:01:00.0: BAR 2: assigned [mem 0x600c180180000-0x600c1801803ff 64bit] [ 3.405566] pci 0003:01:00.0: BAR 4: no space for [io size 0x0100] [ 3.411103] pci 0003:01:00.0: BAR 4: failed to assign [io size 0x0100] [ 3.418033] pci 0003:00 : [PE# 1fe] Secondary bus 0 associated with PE#1fe [ 3.425303] pci 0003:01 : [PE# 1fd] Secondary bus 1 associated with PE#1fd [ 3.432245] pci 0003:01 : [PE# 1fd] Setting up 32-bit TCE table at 0..80000000 [ 3.445546] pci 0003:01 : [PE# 1fd] Setting up window#0 0..7fffffff pg=1000 [ 3.447155] pci 0003:01 : [PE# 1fd] Enabling 64-bit DMA bypass [ 3.452709] iommu: Adding device 0003:01:00.0 to group 4 [ 3.458247] pci 0003:00:00.0: PCI bridge to [bus 01] [ 3.463798] pci 0003:00:00.0: bridge window [mem 0x600c180000000-0x600c1ffefffff] [ 3.470744] pci_bus 0003:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 3.480477] pci 0004:00:00.0: BAR 14: assigned [mem 0x600c200000000-0x600c2017fffff] [ 3.487378] pci 0004:01:00.0: BAR 14: assigned [mem 0x600c200000000-0x600c2017fffff] [ 3.495689] pci 0004:01:00.0: BAR 13: no space for [io size 0x1000] [ 3.501242] pci 0004:01:00.0: BAR 13: failed to assign [io size 0x1000] [ 3.508170] pci 0004:02:00.0: BAR 0: assigned [mem 0x600c200000000-0x600c200ffffff] [ 3.516494] pci 0004:02:00.0: BAR 1: assigned [mem 0x600c201000000-0x600c20101ffff] [ 3.523437] pci 0004:02:00.0: BAR 2: no space for [io size 0x0080] [ 3.530358] pci 0004:02:00.0: BAR 2: failed to assign [io size 0x0080] [ 3.535911] pci 0004:00 : [PE# fe] Secondary bus 0 associated with PE#fe [ 3.543176] pci 0004:02 : [PE# fd] Secondary bus 2..2 associated with PE#fd [ 3.551503] pci 0004:02 : [PE# fd] Setting up 32-bit TCE table at 0..80000000 [ 3.563425] pci 0004:02 : [PE# fd] Setting up window#0 0..7fffffff pg=1000 [ 3.565026] pci 0004:02 : [PE# fd] Enabling 64-bit DMA bypass [ 3.571962] iommu: Adding device 0004:02:00.0 to group 5 [ 3.576125] pci 0004:01:00.0: PCI bridge to [bus 02] [ 3.581669] pci 0004:01:00.0: bridge window [mem 0x600c200000000-0x600c27fefffff] [ 3.589997] pci 0004:01 : [PE# fc] Secondary bus 1 associated with PE#fc [ 3.597251] pci 0004:00:00.0: PCI bridge to [bus 01-02] [ 3.601092] pci 0004:00:00.0: bridge window [mem 0x600c200000000-0x600c27fefffff] [ 3.609407] pci_bus 0004:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 3.617761] pci 0005:00:00.0: BAR 14: assigned [mem 0x600c280000000-0x600c2807fffff] [ 3.626043] pci 0005:01:00.0: BAR 0: assigned [mem 0x600c280000000-0x600c28000ffff 64bit] [ 3.634376] pci 0005:01:00.0: BAR 2: assigned [mem 0x600c280010000-0x600c280011fff 64bit] [ 3.642699] pci 0005:00 : [PE# fe] Secondary bus 0 associated with PE#fe [ 3.649951] pci 0005:01 : [PE# fd] Secondary bus 1 associated with PE#fd [ 3.656891] pci 0005:01 : [PE# fd] Setting up 32-bit TCE table at 0..80000000 [ 3.668824] pci 0005:01 : [PE# fd] Setting up window#0 0..7fffffff pg=1000 [ 3.670421] pci 0005:01 : [PE# fd] Enabling 64-bit DMA bypass [ 3.677350] iommu: Adding device 0005:01:00.0 to group 6 [ 3.682899] pci 0005:00:00.0: PCI bridge to [bus 01] [ 3.687070] pci 0005:00:00.0: bridge window [mem 0x600c280000000-0x600c2ffefffff] [ 3.695418] pci 0030:00 : [PE# 1fe] Secondary bus 0 associated with PE#1fe [ 3.702653] pci 0030:00:00.0: PCI bridge to [bus 01-ff] [ 3.707909] pci 0031:00 : [PE# fe] Secondary bus 0 associated with PE#fe [ 3.715126] pci 0031:00:00.0: PCI bridge to [bus 01-ff] [ 3.719099] pci 0032:00:00.0: BAR 15: assigned [mem 0x6208000000000-0x62080ffffffff 64bit pref] [ 3.728657] pci 0032:00:00.0: BAR 14: assigned [mem 0x620c100000000-0x620c1017fffff] [ 3.735603] pci 0032:01:00.0: BAR 15: assigned [mem 0x6208000000000-0x62080ffffffff 64bit pref] [ 3.743924] pci 0032:01:00.0: BAR 14: assigned [mem 0x620c100000000-0x620c100ffffff] [ 3.752234] pci 0032:01:00.0: BAR 0: assigned [mem 0x620c101000000-0x620c10103ffff] [ 3.759177] pci 0032:01:00.1: BAR 0: assigned [mem 0x620c101040000-0x620c101041fff] [ 3.767493] pci 0032:01:00.2: BAR 0: assigned [mem 0x620c101050000-0x620c101051fff] [ 3.774434] pci 0032:01:00.3: BAR 0: assigned [mem 0x620c101060000-0x620c101061fff] [ 3.782748] pci 0032:01:00.4: BAR 0: assigned [mem 0x620c101070000-0x620c101071fff] [ 3.789688] pci 0032:01:00.0: BAR 13: no space for [io size 0x2000] [ 3.796607] pci 0032:01:00.0: BAR 13: failed to assign [io size 0x2000] [ 3.803541] pci 0032:01:00.0: BAR 13: no space for [io size 0x2000] [ 3.809094] pci 0032:01:00.0: BAR 13: failed to assign [io size 0x2000] [ 3.816022] pci 0032:02:01.0: BAR 15: assigned [mem 0x6208000000000-0x620803fffffff 64bit pref] [ 3.824351] pci 0032:02:09.0: BAR 15: assigned [mem 0x6208040000000-0x620807fffffff 64bit pref] [ 3.834051] pci 0032:02:01.0: BAR 14: assigned [mem 0x620c100000000-0x620c1007fffff] [ 3.840990] pci 0032:02:09.0: BAR 14: assigned [mem 0x620c100800000-0x620c100ffffff] [ 3.849305] pci 0032:02:01.0: BAR 13: no space for [io size 0x1000] [ 3.854857] pci 0032:02:01.0: BAR 13: failed to assign [io size 0x1000] [ 3.861781] pci 0032:02:09.0: BAR 13: no space for [io size 0x1000] [ 3.868718] pci 0032:02:09.0: BAR 13: failed to assign [io size 0x1000] [ 3.875652] pci 0032:02:01.0: BAR 13: no space for [io size 0x1000] [ 3.881207] pci 0032:02:01.0: BAR 13: failed to assign [io size 0x1000] [ 3.888132] pci 0032:02:09.0: BAR 13: no space for [io size 0x1000] [ 3.895063] pci 0032:02:09.0: BAR 13: failed to assign [io size 0x1000] [ 3.900622] pci 0032:03:00.0: BAR 6: assigned [mem 0x620c100000000-0x620c1000fffff pref] [ 3.908930] pci 0032:03:00.0: BAR 1: assigned [mem 0x620c100100000-0x620c10010ffff 64bit] [ 3.917268] pci 0032:03:00.0: BAR 0: no space for [io size 0x0100] [ 3.924187] pci 0032:03:00.0: BAR 0: failed to assign [io size 0x0100] [ 3.929741] pci 0032:00 : [PE# fe] Secondary bus 0 associated with PE#fe [ 3.937009] pci 0032:03 : [PE# fd] Secondary bus 3 associated with PE#fd [ 3.943944] pci 0032:03 : [PE# fd] Setting up 32-bit TCE table at 0..80000000 [ 3.957294] pci 0032:03 : [PE# fd] Setting up window#0 0..7fffffff pg=1000 [ 3.958972] pci 0032:03 : [PE# fd] Enabling 64-bit DMA bypass [ 3.964413] iommu: Adding device 0032:03:00.0 to group 7 [ 3.969945] pci 0032:02:01.0: PCI bridge to [bus 03] [ 3.975504] pci 0032:02:01.0: bridge window [mem 0x620c100000000-0x620c1007fffff] [ 3.982444] pci 0032:02:01.0: bridge window [mem 0x6208000000000-0x620803fffffff 64bit pref] [ 3.990763] pci 0032:02:08.0: PCI bridge to [bus 04-08] [ 3.996318] pci 0032:09:00.0: BAR 6: assigned [mem 0x620c100800000-0x620c1008fffff pref] [ 4.004617] pci 0032:09:00.0: BAR 1: assigned [mem 0x620c100900000-0x620c10090ffff 64bit] [ 4.012956] pci 0032:09:00.0: BAR 0: no space for [io size 0x0100] [ 4.018488] pci 0032:09:00.0: BAR 0: failed to assign [io size 0x0100] [ 4.025424] pci 0032:09 : [PE# fc] Secondary bus 9 associated with PE#fc [ 4.032708] pci 0032:09 : [PE# fc] Setting up 32-bit TCE table at 0..80000000 [ 4.046049] pci 0032:09 : [PE# fc] Setting up window#0 0..7fffffff pg=1000 [ 4.047608] pci 0032:09 : [PE# fc] Enabling 64-bit DMA bypass [ 4.053165] iommu: Adding device 0032:09:00.0 to group 8 [ 4.058698] pci 0032:02:09.0: PCI bridge to [bus 09] [ 4.062874] pci 0032:02:09.0: bridge window [mem 0x620c100800000-0x620c100ffffff] [ 4.071186] pci 0032:02:09.0: bridge window [mem 0x6208040000000-0x620807fffffff 64bit pref] [ 4.079520] pci 0032:02 : [PE# fb] Secondary bus 2 associated with PE#fb [ 4.086771] pci 0032:01:00.0: PCI bridge to [bus 02-09] [ 4.091991] pci 0032:01:00.0: bridge window [mem 0x620c100000000-0x620c17fefffff] [ 4.098924] pci 0032:01:00.0: bridge window [mem 0x6208000000000-0x620bf7ff0ffff 64bit pref] [ 4.108635] pci 0032:01 : [PE# fa] Secondary bus 1 associated with PE#fa [ 4.115906] pci 0032:01 : [PE# fa] Setting up 32-bit TCE table at 0..80000000 [ 4.127862] pci 0032:01 : [PE# fa] Setting up window#0 0..7fffffff pg=1000 [ 4.129425] pci 0032:01 : [PE# fa] Enabling 64-bit DMA bypass [ 4.136362] iommu: Adding device 0032:01:00.0 to group 9 [ 4.140531] iommu: Adding device 0032:01:00.1 to group 9 [ 4.146062] iommu: Adding device 0032:01:00.2 to group 9 [ 4.151609] iommu: Adding device 0032:01:00.3 to group 9 [ 4.157159] iommu: Adding device 0032:01:00.4 to group 9 [ 4.162705] pci 0032:00:00.0: PCI bridge to [bus 01-09] [ 4.166876] pci 0032:00:00.0: bridge window [mem 0x620c100000000-0x620c17fefffff] [ 4.175186] pci 0032:00:00.0: bridge window [mem 0x6208000000000-0x620bf7ff0ffff 64bit pref] [ 4.183519] pci_bus 0032:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 4.193265] pci 0033:00:00.0: BAR 15: assigned [mem 0x6220000000000-0x622001fffffff 64bit pref] [ 4.201538] pci 0033:00:00.0: BAR 14: assigned [mem 0x620c180000000-0x620c1803fffff] [ 4.208474] pci 0033:01:00.0: BAR 4: assigned [mem 0x6220000000000-0x62200000fffff 64bit pref] [ 4.218274] pci 0033:01:00.0: BAR 0: assigned [mem 0x620c180000000-0x620c180003fff 64bit] [ 4.226537] pci 0033:00 : [PE# 1fe] Secondary bus 0 associated with PE#1fe [ 4.233767] pci 0033:01 : [PE# 00] Secondary bus 1 associated with PE#0 [ 4.240702] pci 0033:01 : [PE# 00] Setting up 32-bit TCE table at 0..80000000 [ 4.252657] pci 0033:01 : [PE# 00] Setting up window#0 0..7fffffff pg=1000 [ 4.254233] pci 0033:01 : [PE# 00] Enabling 64-bit DMA bypass [ 4.261168] iommu: Adding device 0033:01:00.0 to group 10 [ 4.266712] pci 0033:00:00.0: PCI bridge to [bus 01] [ 4.270879] pci 0033:00:00.0: bridge window [mem 0x620c180000000-0x620c1ffefffff] [ 4.279194] pci 0033:00:00.0: bridge window [mem 0x6220000000000-0x6223fbff0ffff 64bit pref] [ 4.293008] cpuidle-powernv: Default stop: psscr = 0x0000000000000330,mask=0x00000000003003ff [ 4.295835] cpuidle-powernv: Deepest stop: psscr = 0x0000000000300331,mask=0x00000000003003ff [ 4.304151] cpuidle-powernv: Requested Level (RL) value of first deep stop = 0xf [ 4.314399] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 4.318019] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 4.327755] SCSI subsystem initialized [ 4.329424] pci 0004:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 4.337451] pci 0004:02:00.0: vgaarb: bridge control possible [ 4.342986] pci 0004:02:00.0: vgaarb: setting as boot device (VGA legacy resources not available) [ 4.351299] vgaarb: loaded [ 4.354121] usbcore: registered new interface driver usbfs [ 4.359627] usbcore: registered new interface driver hub [ 4.365495] usbcore: registered new device driver usb [ 4.369374] pps_core: LinuxPPS API ver. 1 registered [ 4.374868] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 4.384582] PTP clock support registered [ 4.387768] EDAC MC: Ver: 3.0.0 [ 4.392023] NetLabel: Initializing [ 4.394284] NetLabel: domain hash size = 128 [ 4.398452] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 4.404024] NetLabel: unlabeled traffic allowed by default [ 4.410206] clocksource: Switched to clocksource timebase [ 4.440225] VFS: Disk quotas dquot_6.6.0 [ 4.440493] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes) [ 4.440987] AppArmor: AppArmor Filesystem Enabled [ 4.444734] NET: Registered protocol family 2 [ 4.445125] TCP established hash table entries: 524288 (order: 6, 4194304 bytes) [ 4.447246] TCP bind hash table entries: 65536 (order: 4, 1048576 bytes) [ 4.449951] TCP: Hash tables configured (established 524288 bind 65536) [ 4.455577] UDP hash table entries: 65536 (order: 5, 2097152 bytes) [ 4.462868] UDP-Lite hash table entries: 65536 (order: 5, 2097152 bytes) [ 4.470239] NET: Registered protocol family 1 [ 4.473460] pci 0005:00:00.0: enabling device (0101 -> 0103) [ 4.478889] pci 0005:01:00.0: enabling device (0140 -> 0142) [ 4.484613] Unpacking initramfs... [ 5.787063] Freeing initrd memory: 55808K [ 5.789681] nest_capp0_imc performance monitor hardware support registered [ 5.792168] core_imc performance monitor hardware support registered [ 5.792277] nest_mba0_imc performance monitor hardware support registered [ 5.792359] nest_mba1_imc performance monitor hardware support registered [ 5.792440] nest_mba4_imc performance monitor hardware support registered [ 5.792522] nest_mba5_imc performance monitor hardware support registered [ 5.792615] nest_mcs01_imc performance monitor hardware support registered [ 5.792723] nest_mcs23_imc performance monitor hardware support registered [ 5.792834] nest_nx_imc performance monitor hardware support registered [ 5.792921] nest_phb0_imc performance monitor hardware support registered [ 5.793006] nest_phb1_imc performance monitor hardware support registered [ 5.793093] nest_phb2_imc performance monitor hardware support registered [ 5.793233] nest_phb3_imc performance monitor hardware support registered [ 5.793360] nest_powerbus0_imc performance monitor hardware support registered [ 5.796308] thread_imc performance monitor hardware support registered [ 5.796414] nest_xlink1_imc performance monitor hardware support registered [ 5.809770] Initialise system trusted keyrings [ 5.809817] Key type blacklist registered [ 5.809942] workingset: timestamp_bits=38 max_order=23 bucket_order=0 [ 5.812727] zbud: loaded [ 5.815834] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 5.816599] fuse init (API version 7.26) [ 5.819330] Key type asymmetric registered [ 5.819356] Asymmetric key parser 'x509' registered [ 5.819600] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 5.819900] io scheduler noop registered [ 5.819925] io scheduler deadline registered [ 5.820368] io scheduler cfq registered (default) [ 5.822299] pci 0004:00:00.0: enabling device (0101 -> 0103) [ 5.822351] pci 0004:01:00.0: enabling device (0141 -> 0143) [ 5.822398] pci 0004:02:00.0: enabling device (0141 -> 0143) [ 5.822445] Using unsupported 1024x768 vga at 600c200010000, depth=32, pitch=4096 [ 5.905079] Console: switching to colour frame buffer device 128x48 [ 5.987826] fb0: Open Firmware frame buffer device on /pciex@600c3c0400000/pci@0/pci@0/vga@0 [ 5.988095] hvc0: raw protocol on /ibm,opal/consoles/serial@0 (boot console) [ 5.988143] hvc0: No interrupts property, using OPAL event [ 5.988577] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 5.992097] Linux agpgart interface v0.103 [ 6.006762] loop: module loaded [ 6.007067] libphy: Fixed MDIO Bus: probed [ 6.007092] tun: Universal TUN/TAP device driver, 1.6 [ 6.007168] PPP generic driver version 2.4.2 [ 6.007293] VFIO - User Level meta-driver version: 0.3 [ 6.007495] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.007556] ehci-pci: EHCI PCI platform driver [ 6.007610] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.007651] ohci-pci: OHCI PCI platform driver [ 6.007703] uhci_hcd: USB Universal Host Controller Interface driver [ 6.007951] xhci_hcd 0005:01:00.0: xHCI Host Controller [ 6.008049] xhci_hcd 0005:01:00.0: new USB bus registered, assigned bus number 1 [ 6.008176] xhci_hcd 0005:01:00.0: Using 64-bit DMA iommu bypass [ 6.008282] xhci_hcd 0005:01:00.0: hcc params 0x0270f06d hci version 0x96 quirks 0x04000000 [ 6.008913] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.008954] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.009001] usb usb1: Product: xHCI Host Controller [ 6.009032] usb usb1: Manufacturer: Linux 4.15.0-21-generic xhci-hcd [ 6.009071] usb usb1: SerialNumber: 0005:01:00.0 [ 6.009267] hub 1-0:1.0: USB hub found [ 6.009305] hub 1-0:1.0: 4 ports detected [ 6.009555] xhci_hcd 0005:01:00.0: xHCI Host Controller [ 6.009591] xhci_hcd 0005:01:00.0: new USB bus registered, assigned bus number 2 [ 6.009671] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 6.009761] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 6.009801] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.009847] usb usb2: Product: xHCI Host Controller [ 6.009879] usb usb2: Manufacturer: Linux 4.15.0-21-generic xhci-hcd [ 6.009918] usb usb2: SerialNumber: 0005:01:00.0 [ 6.010104] hub 2-0:1.0: USB hub found [ 6.010151] hub 2-0:1.0: 4 ports detected [ 6.010938] mousedev: PS/2 mouse device common for all mice [ 6.011569] rtc-opal opal-rtc: rtc core: registered rtc-opal as rtc0 [ 6.011622] i2c /dev entries driver [ 6.014510] device-mapper: ueent: version 1.0.3 [ 6.014805] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 6.014868] powernv-cpufreq: cpufreq pstate min 96 nominal 36 max 29 [ 6.014906] powernv-cpufreq: Workload Optimized Frequency is disabled in the platform [ 6.026466] ledtrig-cpu: registered to indicate activity on CPUs [ 6.027692] NET: Registered protocol family 10 [ 6.033860] Segment Routing with IPv6 [ 6.033909] NET: Registered protocol family 17 [ 6.033984] Key type dns_resolver registered [ 6.034247] registered taskstats version 1 [ 6.034287] Loading compiled-in X.509 certificates [ 6.037756] Loaded X.509 cert 'Build time autogenerated kernel key: 5cc70b1012e4ee61c331f996a10d4c2a036c483d' [ 6.038000] zswap: loaded using pool lzo/zbud [ 6.042609] Key type big_key registered [ 6.042636] Key type trusted registered [ 6.044650] Key type encrypted registered [ 6.044676] AppArmor: AppArmor sha1 policy hashing enabled [ 6.044709] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 6.044794] evm: HMAC attrs: 0x1 [ 6.046039] rtc-opal opal-rtc: setting system clock to 2018-05-11 13:38:29 UTC (1526045909) [ 6.046544] integrity: Unable to open file: /etc/keys/x509_ima.der (-2) [ 6.046547] integrity: Unable to open file: /etc/keys/x509_evm.der (-2) [ 6.048243] Freeing unused kernel memory: 4800K [ 6.048297] This architecture does not have kernel memory protection. Loading, please wait... startinersion 237 [ 6.223613] synth uevent: /devices/vio: failed to send uevent [ 6.223616] vio vio: uevent: failed to send synthetic uevent [ 6.342129] usb 1-3: new high-speed USB device number 2 using xhci_hcd [ 6.491146] usb 1-3: New USB device found, idVendor=0557, idProduct=7000 [ 6.491183] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.497795] hub 1-3:1.0: USB hub found [ 6.498142] hub 1-3:1.0: 4 ports detected [ 6.626122] usb 1-4: new high-speed USB device number 3 using xhci_hcd [ 6.775138] u[ 6.874124] ulow-speed USB device number 4 us[ 7.006756] usb 1-3.1: New USB device found, idVendor=0557, idProduct=2419 [ 7.006794] usb 1-3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.023660] Adaptec aacraid driver 1.2.1[50877]-custom [ 7.023800] pci 0003:00:00.0: enabling device (0101 -> 0103) [ 7.023840] aacraid 0003:01:00.0: enabling device (0140 -> 0142) [ 7.025505] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 2.1.14 7.025557] i40e: Copyright (c) 2013 - 2014 Intel Corporation. [ 7.028171] nvme nvme0: pci function 0033:01:00.0 [ 7.028300] pci 0033:00:00.0: enabling device (0101 -> 0103) [ 7.028347] nvme 0033:01:00.0: enabling device (0140 -> 0142) [ 7.028400] nvme 0033:01:00.0: Using 64-bit DMA iommu bypass [ 7.030786] mpt3sas version 17.100.00.00 loaded [ 7.031191] pci 0032:00:00.0: enabling device (0101 -> 0103) [ 7.031236] pci 0032:01:00.0: enabling device (0141 -> 0143) [ 7.031278] pci 0032:02:01.0: enabling device (0141 -> 0143) [ 7.031318] mpt3sas 0032:03:00.0: enabling device (0140 -> 0142) [ 7.031359] mpt3sas 0032:03:00.0: Using 64-bit DMA iommu bypass [ 7.031397] mpt3sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (536035776 kB) [ 7.032763] pci 0001:00:00.0: enabling device (0101 -> 0103) [ 7.032816] pci 0001:01:00.0: enabling device (0141 -> 0143) [ 7.032855] pci 0001:02:09.0: enabling device (0141 -> 0143) [ 7.032893] i40e 0001:09:00.0: enabling device (0140 -> 0142) [ 7.032930] i40e 0001:09:00.0: Using 64-bit DMA iommu bypass [ 7.034026] hidraw: raw HID events driver (C) Jiri Kosina [ 7.040895] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.712.30-0 (2014/02/10) [ 7.041023] bnx2x 0000:01:00.0: msix capability found [ 7.041071] pci 0000:00:00.0: enabling device (0101 -> 0103) [ 7.041106] bnx2x 0000:01:00.0: enabling device (0140 -> 0142) [ 7.041208] bnx2x 0000:01:00.0: Using 64-bit DMA iommu bypass [ 7.041296] bnx2x 0000:01:00.0: part number 394D4342-34383735-30345430-473030 [ 7.044264] usbcore: registered new interface driver usbhid [ 7.044290] usbhid: USB HID core driver [ 7.046186] input: HID 0557:2419 as /devices/pci0005:00/0005:00:00.0/0005:01:00.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:0557:2419.0001/input/input0 [ 7.046937] i40e 0001:09:00.0: fw 5.1.40981 api 1.5 nvm 5.05 0x800029e1 1.1313.0 [ 7.063857] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.00.00.02-k-debug. [ 7.094635] mpt3sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 7.094698] mpt3sas_cm0: MSI-X vectors supported: 96, no of cores: 128, max_msix_vectors: -1 [ 7.097514] mpt3sas0-msix0: PCI-MSI-X enabled: IRQ 81 [ 7.097543] mpt3sas0-msix1: PCI-MSI-X enabled: IRQ 82 [ 7.097570] mpt3sas0-msix2: PCI-MSI-X enabled: IRQ 83 [ 7.097597] mpt3sas0-msix3: PCI-MSI-X enabled: IRQ 84 [ 7.097624] mpt3sas0-msix4: PCI-MSI-X enabled: IRQ 85 [ 7.097651] mpt3sas0-msix5: PCI-MSI-X enabled: IRQ 86 [ 7.097678] mpt3sas0-msix6: PCI-MSI-X enabled: IRQ 87 [ 7.097704] mpt3sas0-msix7: PCI-MSI-X enabled: IRQ 88 [ 7.097731] mpt3sas0-msix8: PCI-MSI-X enabled: IRQ 89 [ 7.097758] mpt3sas0-msix9: PCI-MSI-X enabled: IRQ 90 [ 7.097785] mpt3sas0-msix10: PCI-MSI-X enabled: IRQ 91 [ 7.097811] mpt3sas0-msix11: PCI-MSI-X enabled: IRQ 92 [ 7.097839] mpt3sas0-msix12: PCI-MSI-X enabled: IRQ 93 [ 7.097865] mpt3sas0-msix13: PCI-MSI-X enabled: IRQ 94 [ 7.097892] mpt3sas0-msix14: PCI-MSI-X enabled: IRQ 95 [ 7.097919] mpt3sas0-msix15: PCI-MSI-X enabled: IRQ 105 [ 7.097946] mpt3sas0-msix16: PCI-MSI-X enabled: IRQ 106 [ 7.097973] mpt3sas0-msix17: PCI-MSI-X enabled: IRQ 107 [ 7.097999] mpt3sas0-msix18: PCI-MSI-X enabled: IRQ 108 [ 7.098026] mpt3sas0-msix19: PCI-MSI-X enabled: IRQ 109 [ 7.098053] mpt3sas0-msix20: PCI-MSI-X enabled: IRQ 110 [ 7.098079] mpt3sas0-msix21: PCI-MSI-X enabled: IRQ 111 [ 7.098106] mpt3sas0-msix22: PCI-MSI-X enabled: IRQ 112 [ 7.098138] mpt3sas0-msix23: PCI-MSI-X enabled: IRQ 113 [ 7.098164] mpt3sas0-msix24: PCI-MSI-X enabled: IRQ 114 [ 7.098191] mpt3sas0-msix25: PCI-MSI-X enabled: IRQ 115 [ 7.098218] mpt3sas0-msix26: PCI-MSI-X enabled: IRQ 116 [ 7.098245] mpt3sas0-msix27: PCI-MSI-X enabled: IRQ 117 [ 7.098272] mpt3sas0-msix28: PCI-MSI-X enabled: IRQ 118 [ 7.098299] mpt3sas0-msix29: PCI-MSI-X enabled: IRQ 119 [ 7.098325] mpt3sas0-msix30: PCI-MSI-X enabled: IRQ 120 [ 7.098352] mpt3sas0-msix31: PCI-MSI-X enabled: IRQ 121 [ 7.098379] mpt3sas0-msix32: PCI-MSI-X enabled: IRQ 122 [ 7.098405] mpt3sas0-msix33: PCI-MSI-X enabled: IRQ 123 [ 7.098432] mpt3sas0-msix34: PCI-MSI-X enabled: IRQ 124 [ 7.098459] mpt3sas0-msix35: PCI-MSI-X enabled: IRQ 125 [ 7.098485] mpt3sas0-msix36: PCI-MSI-X enabled: IRQ 126 [ 7.098512] mpt3sas0-msix37: PCI-MSI-X enabled: IRQ 127 [ 7.098539] mpt3sas0-msix38: PCI-MSI-X enabled: IRQ 128 [ 7.098565] mpt3sas0-msix39: PCI-MSI-X enabled: IRQ 129 [ 7.098592] mpt3sas0-msix40: PCI-MSI-X enabled: IRQ 130 [ 7.098763] mpt3sas0-msix41: PCI-MSI-X enabled: IRQ 131 [ 7.104312] mpt3sas0-msix42: PCI-MSI-X enabled: IRQ 132 [ 7.108476] mpt3sas0-msix43: PCI-MSI-X enabled: IRQ 133 [ 7.110203] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0005:01:00.0-3.1/input0 [ 7.110361] input: HID 0557:2419 as /devices/pci0005:00/0005:00:00.0/0005:01:00.0/usb1/1-3/1-3.1/1-3.1:1.1/0003:0557:2419.0002/input/input1 [ 7.110476] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0005:01:00.0-3.1/input1 [ 7.150076] mpt3sas0-msix44: PCI-MSI-X enabled: IRQ 134 [ 7.154240] mpt3sas0-msix45: PCI-MSI-X enabled: IRQ 135 [ 7.159776] mpt3sas0-msix46: PCI-MSI-X enabled: IRQ 136 [ 7.165324] mpt3sas0-msix47: PCI-MSI-X enabled: IRQ 137 [ 7.170875] mpt3sas0-msix48: PCI-MSI-X enabled: IRQ 138 [ 7.175037] mpt3sas0-msix49: PCI-MSI-X enabled: IRQ 139 [ 7.180577] mpt3sas0-msix50: PCI-MSI-X enabled: IRQ 140 [ 7.186128] mpt3sas0-msix51: PCI-MSI-X enabled: IRQ 141 [ 7.191673] mpt3sas0-msix52: PCI-MSI-X enabled: IRQ 142 [ 7.195840] mpt3sas0-msix53: PCI-MSI-X enabled: IRQ 143 [ 7.201381] mpt3sas0-msix54: PCI-MSI-X enabled: IRQ 144 [ 7.206926] mpt3sas0-msix55: PCI-MSI-X enabled: IRQ 145 [ 7.212476] mpt3sas0-msix56: PCI-MSI-X enabled: IRQ 146 [ 7.216639] mpt3sas0-msix57: PCI-MSI-X enabled: IRQ 147 [ 7.222180] mpt3sas0-msix58: PCI-MSI-X enabled: IRQ 148 [ 7.227727] mpt3sas0-msix59: PCI-MSI-X enabled: IRQ 149 [ 7.233274] mpt3sas0-msix60: PCI-MSI-X enabled: IRQ 150 [ 7.237441] mpt3sas0-msix61: PCI-MSI-X enabled: IRQ 151 [ 7.242996] mpt3sas0-msix62: PCI-MSI-X enabled: IRQ 152 [ 7.248534] mpt3sas0-msix63: PCI-MSI-X enabled: IRQ 153 [ 7.254077] mpt3sas0-msix64: PCI-MSI-X enabled: IRQ 154 [ 7.258246] mpt3sas0-msix65: PCI-MSI-X enabled: IRQ 155 [ 7.263785] mpt3sas0-msix66: PCI-MSI-X enabled: IRQ 156 [ 7.269333] mpt3sas0-msix67: PCI-MSI-X enabled: IRQ 157 [ 7.274877] mpt3sas0-msix68: PCI-MSI-X enabled: IRQ 158 [ 7.279044] mpt3sas0-msix69: PCI-MSI-X enabled: IRQ 159 [ 7.284583] mpt3sas0-msix70: PCI-MSI-X enabled: IRQ 160 [ 7.290134] mpt3sas0-msix71: PCI-MSI-X enabled: IRQ 161 [ 7.295701] mpt3sas0-msix72: PCI-MSI-X enabled: IRQ 162 [ 7.299914] mpt3sas0-msix73: PCI-MSI-X enabled: IRQ 163 [ 7.305397] mpt3sas0-msix74: PCI-MSI-X enabled: IRQ 164 [ 7.310935] mpt3sas0-msix75: PCI-MSI-X enabled: IRQ 165 [ 7.316478] mpt3sas0-msix76: PCI-MSI-X enabled: IRQ 166 [ 7.320646] mpt3sas0-msix77: PCI-MSI-X enabled: IRQ 167 [ 7.326185] mpt3sas0-msix78: PCI-MSI-X enabled: IRQ 168 [ 7.331730] mpt3sas0-msix79: PCI-MSI-X enabled: IRQ 169 [ 7.337280] mpt3sas0-msix80: PCI-MSI-X enabled: IRQ 170 [ 7.341444] mpt3sas0-msix81: PCI-MSI-X enabled: IRQ 171 [ 7.346987] mpt3sas0-msix82: PCI-MSI-X enabled: IRQ 172 [ 7.352536] mpt3sas0-msix83: PCI-MSI-X enabled: IRQ 173 [ 7.354476] aacraid: Comm Interface type3 enabled [ 7.355403] bnx2x 0000:01:00.0: VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update [ 7.356091] i40e 0001:09:00.0: MAC address: 0c:c4:7a:f4:1e:28 [ 7.364318] i40e 0001:09:00.0 eth0: NIC Link is Up, 1000 Mbps Full Duplex, Flow Control: None [ 7.366018] i40e 0001:09:00.0: PCI-Express: Speed 5.0GT/s Width x8 [ 7.366020] i40e 0001:09:00.0: PCI-Express bandwidth available for this device may be insufficient for optimal performance. [ 7.366021] i40e 0001:09:00.0: Please move the device to a different PCI-e link with more lanes and/or higher transfer rate. [ 7.366593] i40e 0001:09:00.0: Features: PF-id[0] VFs: 32 VSIs: 34 QP: 119 RSS FD_ATR FD_SB NTUPLE DCB VxLAN Geneve PTP VEPA [ 7.366608] AAC0: kernel 4.0-0[0] Mar 12 2018 [ 7.366609] AAC0: monitor 0.0-0[0] [ 7.366610] AAC0: bios 0.13-209[32000] [ 7.366611] AAC0: serial 10F447 [ 7.366612] AAC0: Non-DASD support enabled. [ 7.366613] AAC0: 64bit support enabled. [ 7.366615] aacraid 0003:01:00.0: Using 64-bit DMA iommu bypass [ 7.366619] aacraid 0003:01:00.0: 64 Bit DAC enabled [ 7.368395] scsi host0: aacraid [ 7.368482] pci 0001:02:01.0: enabling device (0141 -> 0143) [ 7.368491] qla2xxx 0001:03:00.0: enabling device (0140 -> 0142) [ 7.370210] qla2xxx [0001:03:00.0]-001a: : MSI-X vector count: 32. [ 7.370212] qla2xxx [0001:03:00.0]-001d: : Found an ISP2532 irq 41 iobase 0x000000006baeaf0e. [ 7.370215] qla2xxx 0001:03:00.0: Using 64-bit DMA iommu bypass [ 7.370297] [drm] platform has no IO space, trying MMIO [ 7.370306] [drm] Using P2A bridge for configuration [ 7.370309] [drm] AST 2500 detected [ 7.370312] [drm] Analog VGA only [ 7.370322] [drm] dram MCLK=800 Mhz type=7 bus_width=16 size=01000000 [ 7.370374] [TTM] Zone kernel: Available graphics memory: 268017888 kiB [ 7.370375] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 7.370375] [TTM] Initializing pool allocator [ 7.370379] [TTM] Initializing DMA pool allocator [ 7.378100] fb: switching to astdrmfb from OFfb vga [ 7.378146] i40e 0001:09:00.1: enabling device (0140 -> 0142) [ 7.378151] i40e 0001:09:00.1: Using 64-bit DMA iommu bypass [ 7.386101] scsi 0:2:0:0: Direct-Access SEAGATE ST2000NM0045 N003 PQ: 0 ANSI: 6 [ 7.387608] sd 0:2:0:0: Attached scsi generic sg0 type 0 [ 7.389451] sd 0:2:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 7.390462] sd 0:2:0:0: [sda] Write Protect is off [ 7.390860] i40e 0001:09:00.1: fw 5.1.40981 api 1.5 nvm 5.05 0x800029e1 1.1313.0 [ 7.392238] sd 0:2:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 7.397981] sda: sda1 sda2 [ 7.402781] sd 0:2:0:0: [sda] Attached SCSI disk [ 7.609081] mpt3sas0-msix84: PCI-MSI-X enabled: IRQ 174 [ 7.609082] mpt3sas0-msix85: PCI-MSI-X enabled: IRQ 175 [ 7.609083] mpt3sas0-msix86: PCI-MSI-X enabled: IRQ 176 [ 7.609083] mpt3sas0-msix87: PCI-MSI-X enabled: IRQ 177 [ 7.609084] mpt3sas0-msix88: PCI-MSI-X enabled: IRQ 178 [ 7.609085] mpt3sas0-msix89: PCI-MSI-X enabled: IRQ 179 [ 7.609086] mpt3sas0-msix90: PCI-MSI-X enabled: IRQ 180 [ 7.609086] mpt3sas0-msix91: PCI-MSI-X enabled: IRQ 181 [ 7.609087] mpt3sas0-msix92: PCI-MSI-X enabled: IRQ 182 [ 7.609088] mpt3sas0-msix93: PCI-MSI-X enabled: IRQ 183 [ 7.609088] mpt3sas0-msix94: PCI-MSI-X enabled: IRQ 184 [ 7.609089] mpt3sas0-msix95: PCI-MSI-X enabled: IRQ 185 [ 7.609092] mpt3sas_cm0: iomem(0x000620c100100000), mapped(0x000000006dc4bff0), size(65536) [ 7.609093] mpt3sas_cm0: ioport(0x0000000000000000), size(0) [ 7.666858] mpt3sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 7.699091] Console: switching to colour dummy device 80x25 [ 7.699472] scsi 0:2:1:0: Direct-Access SEAGATE ST2000NM0045 N003 PQ: 0 ANSI: 6 [ 7.700778] mpt3sas_cm0: Allocated physical memory: size(25990 kB) [ 7.700780] mpt3sas_cm0: Current Controller Queue Depth(6512),Max Controller Queue Depth(6528) [ 7.700780] mpt3sas_cm0: Scatter Gather Elements per IO(128) [ 7.723459] sd 0:2:1:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 7.724491] sd 0:2:1:0: [sdb] Write Protect is off [ 7.726265] sd 0:2:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 7.726966] sd 0:2:1:0: Attached scsi generic sg1 type 0 [ 7.731673] sdb: sdb1 sdb2 sdb3 [ 7.736562] sd 0:2:1:0: [sdb] Attached SCSI disk [ 7.747371] mpt3sas_cm0: LSISAS3216: FWVersion(15.00.00.00), ChipRevision(0x01), BiosVersion(00.00.00.00) [ 7.747372] mpt3sas_cm0: Protocol=( [ 7.747373] Initiator [ 7.747374] ,Target [ 7.747374] ), [ 7.747375] Capabilities=( [ 7.747375] TLR [ 7.747376] ,EEDP [ 7.747376] ,Snapshot Buffer [ 7.747377] ,Diag Trace Buffer [ 7.747377] ,Task Set Full [ 7.747378] ,NCQ [ 7.747378] ) [ 7.747417] scsi host1: Fusion MPT SAS Host [ 7.747762] scsi 0:2:10:0: Direct-Access SEAGATE ST4000NM0075 KT02 PQ: 0 ANSI: 6 [ 7.747825] mpt3sas_cm0: sending port enable !! [ 7.747972] pci 0032:02:09.0: enabling device (0141 -> 0143) [ 7.747984] mpt3sas 0032:09:00.0: enabling device (0140 -> 0142) [ 7.747995] mpt3sas 0032:09:00.0: Using 64-bit DMA iommu bypass [ 7.748002] mpt3sas_cm1: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (536035776 kB) [ 7.748184] random: crng init done [ 7.750318] mpt3sas_cm0: host_add: handle(0x0001), sas_addr(0x500062b200f40c80), phys(16) [ 7.766127] mpt3sas_cm0: port enable: SUCCESS [ 7.805835] mpt3sas_cm1: CurrentHostPageSize is 0: Setting default host page size to 4k [ 7.805857] mpt3sas_cm1: MSI-X vectors supported: 96, no of cores: 128, max_msix_vectors: -1 [ 7.808746] mpt3sas1-msix0: PCI-MSI-X enabled: IRQ 489 [ 7.808746] mpt3sas1-msix1: PCI-MSI-X enabled: IRQ 490 [ 7.808747] mpt3sas1-msix2: PCI-MSI-X enabled: IRQ 491 [ 7.808748] mpt3sas1-msix3: PCI-MSI-X enabled: IRQ 492 [ 7.808748] mpt3sas1-msix4: PCI-MSI-X enabled: IRQ 493 [ 7.808749] mpt3sas1-msix5: PCI-MSI-X enabled: IRQ 494 [ 7.808749] mpt3sas1-msix6: PCI-MSI-X enabled: IRQ 495 [ 7.808750] mpt3sas1-msix7: PCI-MSI-X enabled: IRQ 514 [ 7.808750] mpt3sas1-msix8: PCI-MSI-X enabled: IRQ 515 [ 7.808751] mpt3sas1-msix9: PCI-MSI-X enabled: IRQ 516 [ 7.808752] mpt3sas1-msix10: PCI-MSI-X enabled: IRQ 517 [ 7.808752] mpt3sas1-msix11: PCI-MSI-X enabled: IRQ 23 [ 7.808752] mpt3sas1-msix12: PCI-MSI-X enabled: IRQ 30 [ 7.808753] mpt3sas1-msix13: PCI-MSI-X enabled: IRQ 31 [ 7.808753] mpt3sas1-msix14: PCI-MSI-X enabled: IRQ 32 [ 7.808754] mpt3sas1-msix15: PCI-MSI-X enabled: IRQ 33 [ 7.808754] mpt3sas1-msix16: PCI-MSI-X enabled: IRQ 34 [ 7.808755] mpt3sas1-msix17: PCI-MSI-X enabled: IRQ 35 [ 7.808755] mpt3sas1-msix18: PCI-MSI-X enabled: IRQ 36 [ 7.808756] mpt3sas1-msix19: PCI-MSI-X enabled: IRQ 37 [ 7.808756] mpt3sas1-msix20: PCI-MSI-X enabled: IRQ 38 [ 7.808756] mpt3sas1-msix21: PCI-MSI-X enabled: IRQ 39 [ 7.808757] mpt3sas1-msix22: PCI-MSI-X enabled: IRQ 43 [ 7.808757] mpt3sas1-msix23: PCI-MSI-X enabled: IRQ 44 [ 7.808758] mpt3sas1-msix24: PCI-MSI-X enabled: IRQ 45 [ 7.808758] mpt3sas1-msix25: PCI-MSI-X enabled: IRQ 46 [ 7.808759] mpt3sas1-msix26: PCI-MSI-X enabled: IRQ 47 [ 7.808759] mpt3sas1-msix27: PCI-MSI-X enabled: IRQ 518 [ 7.808760] mpt3sas1-msix28: PCI-MSI-X enabled: IRQ 519 [ 7.808760] mpt3sas1-msix29: PCI-MSI-X enabled: IRQ 520 [ 7.808761] mpt3sas1-msix30: PCI-MSI-X enabled: IRQ 521 [ 7.808761] mpt3sas1-msix31: PCI-MSI-X enabled: IRQ 522 [ 7.808762] mpt3sas1-msix32: PCI-MSI-X enabled: IRQ 523 [ 7.808762] mpt3sas1-msix33: PCI-MSI-X enabled: IRQ 524 [ 7.808762] mpt3sas1-msix34: PCI-MSI-X enabled: IRQ 525 [ 7.808763] mpt3sas1-msix35: PCI-MSI-X enabled: IRQ 526 [ 7.808763] mpt3sas1-msix36: PCI-MSI-X enabled: IRQ 527 [ 7.808764] mpt3sas1-msix37: PCI-MSI-X enabled: IRQ 528 [ 7.808764] mpt3sas1-msix38: PCI-MSI-X enabled: IRQ 529 [ 7.808765] mpt3sas1-msix39: PCI-MSI-X enabled: IRQ 530 [ 7.808765] mpt3sas1-msix40: PCI-MSI-X enabled: IRQ 531 [ 7.808766] mpt3sas1-msix41: PCI-MSI-X enabled: IRQ 532 [ 7.808766] mpt3sas1-msix42: PCI-MSI-X enabled: IRQ 533 [ 7.808767] mpt3sas1-msix43: PCI-MSI-X enabled: IRQ 534 [ 7.808767] mpt3sas1-msix44: PCI-MSI-X enabled: IRQ 535 [ 7.808768] mpt3sas1-msix45: PCI-MSI-X enabled: IRQ 536 [ 7.808768] mpt3sas1-msix46: PCI-MSI-X enabled: IRQ 537 [ 7.808769] mpt3sas1-msix47: PCI-MSI-X enabled: IRQ 538 [ 7.808769] mpt3sas1-msix48: PCI-MSI-X enabled: IRQ 539 [ 7.808770] mpt3sas1-msix49: PCI-MSI-X enabled: IRQ 540 [ 7.808770] mpt3sas1-msix50: PCI-MSI-X enabled: IRQ 541 [ 7.808771] mpt3sas1-msix51: PCI-MSI-X enabled: IRQ 542 [ 7.808771] mpt3sas1-msix52: PCI-MSI-X enabled: IRQ 543 [ 7.808772] mpt3sas1-msix53: PCI-MSI-X enabled: IRQ 544 [ 7.808772] mpt3sas1-msix54: PCI-MSI-X enabled: IRQ 545 [ 7.808773] mpt3sas1-msix55: PCI-MSI-X enabled: IRQ 546 [ 7.808773] mpt3sas1-msix56: PCI-MSI-X enabled: IRQ 547 [ 7.808774] mpt3sas1-msix57: PCI-MSI-X enabled: IRQ 548 [ 7.808774] mpt3sas1-msix58: PCI-MSI-X enabled: IRQ 549 [ 7.808775] mpt3sas1-msix59: PCI-MSI-X enabled: IRQ 550 [ 7.808775] mpt3sas1-msix60: PCI-MSI-X enabled: IRQ 551 [ 7.808776] mpt3sas1-msix61: PCI-MSI-X enabled: IRQ 552 [ 7.808776] mpt3sas1-msix62: PCI-MSI-X enabled: IRQ 553 [ 7.808777] mpt3sas1-msix63: PCI-MSI-X enabled: IRQ 554 [ 7.808777] mpt3sas1-msix64: PCI-MSI-X enabled: IRQ 555 [ 7.808778] mpt3sas1-msix65: PCI-MSI-X enabled: IRQ 556 [ 7.808778] mpt3sas1-msix66: PCI-MSI-X enabled: IRQ 557 [ 7.808779] mpt3sas1-msix67: PCI-MSI-X enabled: IRQ 558 [ 7.808779] mpt3sas1-msix68: PCI-MSI-X enabled: IRQ 559 [ 7.808780] mpt3sas1-msix69: PCI-MSI-X enabled: IRQ 560 [ 7.808780] mpt3sas1-msix70: PCI-MSI-X enabled: IRQ 561 [ 7.808781] mpt3sas1-msix71: PCI-MSI-X enabled: IRQ 562 [ 7.808781] mpt3sas1-msix72: PCI-MSI-X enabled: IRQ 563 [ 7.808782] mpt3sas1-msix73: PCI-MSI-X enabled: IRQ 564 [ 7.808782] mpt3sas1-msix74: PCI-MSI-X enabled: IRQ 565 [ 7.808783] mpt3sas1-msix75: PCI-MSI-X enabled: IRQ 566 [ 7.808783] mpt3sas1-msix76: PCI-MSI-X enabled: IRQ 567 [ 7.808784] mpt3sas1-msix77: PCI-MSI-X enabled: IRQ 568 [ 7.808784] mpt3sas1-msix78: PCI-MSI-X enabled: IRQ 569 [ 7.808785] mpt3sas1-msix79: PCI-MSI-X enabled: IRQ 570 [ 7.808785] mpt3sas1-msix80: PCI-MSI-X enabled: IRQ 571 [ 7.808786] mpt3sas1-msix81: PCI-MSI-X enabled: IRQ 572 [ 7.808786] mpt3sas1-msix82: PCI-MSI-X enabled: IRQ 573 [ 7.808787] mpt3sas1-msix83: PCI-MSI-X enabled: IRQ 574 [ 7.808788] mpt3sas1-msix84: PCI-MSI-X enabled: IRQ 575 [ 7.808788] mpt3sas1-msix85: PCI-MSI-X enabled: IRQ 576 [ 7.808789] mpt3sas1-msix86: PCI-MSI-X enabled: IRQ 577 [ 7.808789] mpt3sas1-msix87: PCI-MSI-X enabled: IRQ 578 [ 7.808790] mpt3sas1-msix88: PCI-MSI-X enabled: IRQ 579 [ 7.808790] mpt3sas1-msix89: PCI-MSI-X enabled: IRQ 580 [ 7.808791] mpt3sas1-msix90: PCI-MSI-X enabled: IRQ 581 [ 7.808791] mpt3sas1-msix91: PCI-MSI-X enabled: IRQ 582 [ 7.808792] mpt3sas1-msix92: PCI-MSI-X enabled: IRQ 583 [ 7.808792] mpt3sas1-msix93: PCI-MSI-X enabled: IRQ 584 [ 7.808793] mpt3sas1-msix94: PCI-MSI-X enabled: IRQ 585 [ 7.808794] mpt3sas1-msix95: PCI-MSI-X enabled: IRQ 586 [ 7.808795] mpt3sas_cm1: iomem(0x000620c100900000), mapped(0x00000000d48d5961), size(65536) [ 7.808796] mpt3sas_cm1: ioport(0x0000000000000000), size(0) [ 7.812195] sd 0:2:10:0: [sdc] 976754646 4096-byte logical blocks: (4.00 TB/3.64 TiB) [ 7.812908] sd 0:2:10:0: [sdc] Write Protect is off [ 7.814135] sd 0:2:10:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 7.815708] sd 0:2:10:0: Attached scsi generic sg2 type 0 [ 7.819116] sdc: sdc1 sdc2 [ 7.823120] sd 0:2:10:0: [sdc] Attached SCSI disk [ 7.840672] scsi 0:2:11:0: Direct-Access SEAGATE ST4000NM0075 KT02 PQ: 0 ANSI: 6 [ 7.859229] sd 0:2:11:0: [sdd] 976754646 4096-byte logical blocks: (4.00 TB/3.64 TiB) [ 7.859926] sd 0:2:11:0: [sdd] Write Protect is off [ 7.861135] sd 0:2:11:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 7.864251] sd 0:2:11:0: Attached scsi generic sg3 type 0 [ 7.866555] mpt3sas_cm1: CurrentHostPageSize is 0: Setting default host page size to 4k [ 7.869667] sd 0:2:11:0: [sdd] Attached SCSI disk [ 7.883658] scsi 0:3:123:0: Enclosure ADAPTEC Smart Adapter 4.00 PQ: 0 ANSI: 5 [ 7.900442] mpt3sas_cm1: Allocated physical memory: size(25736 kB) [ 7.900443] mpt3sas_cm1: Current Controller Queue Depth(6448),Max Controller Queue Depth(6464) [ 7.900444] mpt3sas_cm1: Scatter Gather Elements per IO(128) [ 7.904460] scsi 0:3:123:0: Attached scsi generic sg4 type 13 [ 7.910122] ses 0:3:123:0: Attached Enclosure device [ 7.947015] mpt3sas_cm1: LSISAS3216: FWVersion(13.30.01.00), ChipRevision(0x01), BiosVersion(00.00.00.00) [ 7.947016] mpt3sas_cm1: Protocol=( [ 7.947017] Initiator [ 7.947018] ,Target [ 7.947018] ), [ 7.947019] Capabilities=( [ 7.947019] TLR [ 7.947020] ,EEDP [ 7.947021] ,Snapshot Buffer [ 7.947021] ,Diag Trace Buffer [ 7.947022] ,Task Set Full [ 7.947022] ,NCQ [ 7.947022] ) [ 7.947060] scsi host3: Fusion MPT SAS Host [ 7.947510] mpt3sas_cm1: sending port enable !! [ 7.950607] mpt3sas_cm1: host_add: handle(0x0001), sas_addr(0x500062b200f3d100), phys(16) [ 7.966134] mpt3sas_cm1: port enable: SUCCESS [ 8.011923] i40e 0001:09:00.1: MAC address: 0c:c4:7a:f4:1e:29 [ 8.020324] i40e 0001:09:00.1 eth2: NIC Link is Up, 10 Gbps Full Duplex, Flow Control: None [ 8.035157] i40e 0001:09:00.1: PCI-Express: Speed 5.0GT/s Width x8 [ 8.035158] i40e 0001:09:00.1: PCI-Express bandwidth available for this device may be insufficient for optimal performance. [ 8.035159] i40e 0001:09:00.1: Please move the device to a different PCI-e link with more lanes and/or higher transfer rate. [ 8.035690] i40e 0001:09:00.1: Features: PF-id[1] VFs: 32 VSIs: 34 QP: 119 RSS FD_ATR FD_SB NTUPLE DCB VxLAN Geneve PTP VEPA [ 8.230331] scsi host2: qla2xxx [ 8.230336] qla2xxx [0001:03:00.0]-4800:2: DPC handler sleeping. [ 8.240119] qla2xxx [0001:03:00.0]-00fb:2: QLogic QLE2562 - PCI-Express Dual Channel 8Gb Fibre Channel HBA. [ 8.240125] qla2xxx [0001:03:00.0]-00fc:2: ISP2532: PCIe (5.0GT/s x8) @ 0001:03:00.0 hdma+ host#=2 fw=8.07.00 (90d5). [ 8.646485] bnx2x 0000:01:00.1: msix capability found [ 8.651911] bnx2x 0000:01:00.1: enabling device (0140 -> 0142) [ 8.657527] bnx2x 0000:01:00.1: Using 64-bit DMA iommu bypass [ 8.677877] Console: switching to colour frame buffer device 128x48 [ 8.690103] bnx2x 0000:01:00.1: part number 394D4342-34383735-30345430-473030 [ 8.690307] ast 0004:02:00.0: fb0: astdrmfb frame buffer device [ 8.690354] i40e 0001:09:00.2: enabling device (0140 -> 0142) [ 8.690389] i40e 0001:09:00.2: Using 64-bit DMA iommu bypass [ 8.694591] qla2xxx 0001:03:00.1: enabling device (0140 -> 0142) [ 8.699091] qla2xxx [0001:03:00.1]-001a: : MSI-X vector count: 32. [ 8.705979] qla2xxx [0001:03:00.1]-001d: : Found an ISP2532 irq 42 iobase 0x00000000507ae35c. [ 8.714304] qla2xxx 0001:03:00.1: Using 64-bit DMA iommu bypass [ 8.721698] i40e 0001:09:00.2: fw 5.1.40981 api 1.5 nvm 5.05 0x800029e1 1.1313.0 [ 8.728187] [drm] Initialized ast 0.1.0 20120228 for 0004:02:00.0 on minor 0 [ 8.977670] qla2xxx [0001:03:00.0]-580c:2: LIP reset occurred (f700). [ 8.977718] qla2xxx [0001:03:00.0]-480b:2: Reset marker scheduled. [ 8.977749] qla2xxx [0001:03:00.0]-480c:2: Reset marker end. [ 8.977794] qla2xxx [0001:03:00.0]-480f:2: Loop resync scheduled. [ 8.981305] qla2xxx [0001:03:00.0]-5809:2: LIP occurred (f700). [ 8.981494] qla2xxx [0001:03:00.0]-580c:2: LIP reset occurred (f7f7). [ 8.984747] qla2xxx [0001:03:00.0]-18b7:2: Format 0 : Number of VPs setup 254, number of VPs acquired 1. [ 8.984790] qla2xxx [0001:03:00.0]-18b8:2: Primary port id 0000ef. [ 9.007774] qla2xxx [0001:03:00.0]-580e:2: Asynchronous P2P MODE received. [ 9.025737] qla2xxx [0001:03:00.0]-18b9:2: Format 1: VP[0] enabled - status 0 - with port id 050500. [ 9.025779] qla2xxx [0001:03:00.0]-5875:2: Format 1: Remote WWPN 20:05:00:05:1e:02:da:3e. [ 9.025815] qla2xxx [0001:03:00.0]-5875:2: Format 1: WWPN 21:00:00:24:ff:91:27:de. [ 9.028159] qla2xxx [0001:03:00.0]-500a:2: LOOP UP detected (4 Gbps). [ 9.028204] qla2xxx [0001:03:00.0]-5812:2: Port database changed ffff 0006 0000. [ 9.041739] bnx2x 0000:01:00.1: VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update [ 9.046809] i40e 0001:09:00.2: MAC address: 0c:c4:7a:f4:1e:2a [ 9.056810] i40e 0001:09:00.2: PCI-Express: Speed 5.0GT/s Width x8 [ 9.056843] i40e 0001:09:00.2: PCI-Express bandwidth available for this device may be insufficient for optimal performance. [ 9.056891] i40e 0001:09:00.2: Please move the device to a different PCI-e link with more lanes and/or higher transfer rate. [ 9.057474] i40e 0001:09:00.2: Features: PF-id[2] VFs: 32 VSIs: 34 QP: 119 RSS FD_ATR FD_SB NTUPLE DCB VxLAN Geneve PTP VEPA [ 9.057566] i40e 0001:09:00.3: enabling device (0140 -> 0142) [ 9.057602] i40e 0001:09:00.3: Using 64-bit DMA iommu bypass [ 9.072695] i40e 0001:09:00.3: fw 5.1.40981 api 1.5 nvm 5.05 0x800029e1 1.1313.0 [ 9.393280] i40e 0001:09:00.3: MAC address: 0c:c4:7a:f4:1e:2b [ 9.401079] bnx2x 0000:01:00.2: msix capability found [ 9.401132] bnx2x 0000:01:00.2: enabling device (0140 -> 0142) [ 9.401230] bnx2x 0000:01:00.2: Using 64-bit DMA iommu bypass [ 9.401311] bnx2x 0000:01:00.2: part number 394D4342-34383735-30345430-473030 [ 9.403197] i40e 0001:09:00.3: PCI-Express: Speed 5.0GT/s Width x8 [ 9.403228] i40e 0001:09:00.3: PCI-Express bandwidth available for this device may be insufficient for optimal performance. [ 9.403275] i40e 0001:09:00.3: Please move the device to a different PCI-e link with more lanes and/or higher transfer rate. [ 9.403879] i40e 0001:09:00.3: Features: PF-id[3] VFs: 32 VSIs: 34 QP: 119 RSS FD_ATR FD_SB NTUPLE DCB VxLAN Geneve PTP VEPA [ 9.405266] i40e 0001:09:00.0 enP1p9s0f0: renamed from eth0 [ 9.434508] i40e 0001:09:00.1 enP1p9s0f1: renamed from eth2 [ 9.491185] qla2xxx [0001:03:00.0]-8837:2: F/W Ready - OK. [ 9.491251] qla2xxx [0001:03:00.0]-883a:2: fw_state=3 (3, 100, 0, 4 800) curr time=fffee29d. [ 9.491321] qla2xxx [0001:03:00.0]-280e:2: HBA in F P2P topology. [ 9.491352] qla2xxx [0001:03:00.0]-2814:2: Configure loop -- dpc flags = 0x200152e1. [ 9.494986] qla2xxx [0001:03:00.0]-287d:2: NodeName = 20000024ff9127de. [ 9.495017] qla2xxx [0001:03:00.0]-28a5:2: Manufacturer = QLogic Corporation. [ 9.495055] qla2xxx [0001:03:00.0]-28a6:2: Serial no. = RFD1548J28033. [ 9.495085] qla2xxx [0001:03:00.0]-28a7:2: Model Name = QLE2562. [ 9.495115] qla2xxx [0001:03:00.0]-28a8:2: Model Desc = PCI-Express Dual Channel 8Gb Fibre Channel HBA. [ 9.495157] qla2xxx [0001:03:00.0]-28a9:2: Hardware ver = PX2810403-01 R. [ 9.495187] qla2xxx [0001:03:00.0]-28aa:2: Driver ver = 10.00.00.02-k-debug. [ 9.495224] qla2xxx [0001:03:00.0]-28ab:2: Optrom version = 46.51. [ 9.495255] qla2xxx [0001:03:00.0]-28ac:2: Firmware vers = 8.07.00 (90d5). [ 9.495285] qla2xxx [0001:03:00.0]-28ae:2: OS Name and Version = Linux 4.15.0-21-generic #22~lp1770003+build.1-Ubuntu SMP Thu May 10 21:34:00 UTC 2018. [ 9.495343] qla2xxx [0001:03:00.0]-28af:2: CT Payload Length = 0x80000. [ 9.495374] qla2xxx [0001:03:00.0]-28b0:2: Symbolic Name = QLE2562 FW:v8.07.00 DVR:v10.00.00.02-k-debug. [ 9.495415] qla2xxx [0001:03:00.0]-28b1:2: Vendor Id = 77100000. [ 9.495445] qla2xxx [0001:03:00.0]-28b2:2: Port Num = 1000000. [ 9.495460] bnx2x 0000:01:00.3: msix capability found [ 9.495479] bnx2x 0000:01:00.3: enabling device (0140 -> 0142) [ 9.495528] qla2xxx [0001:03:00.0]-28b3:2: Fabric Name = 100000051e02da3e. [ 9.495554] bnx2x 0000:01:00.3: Using 64-bit DMA iommu bypass [ 9.495563] i40e 0001:09:00.2 enP1p9s0f2: renamed from eth3 [ 9.495625] qla2xxx [0001:03:00.0]-28b4:2: BIOS Name = BIOS 3.29 [ 9.495655] qla2xxx [0001:03:00.0]-281b:2: Vendor Identifier = QLGC. [ 9.495685] qla2xxx [0001:03:00.0]-28b5:2: RHBA identifier = 21000024ff9127de. [ 9.495721] bnx2x 0000:01:00.3: part number 394D4342-34383735-30345430-473030 [ 9.496935] qla2xxx [0001:03:00.0]-2816:2: RHBA FDMI v2 failed, CT Reason code: 0x9, CT Explanation 0x0 [ 9.496985] qla2xxx [0001:03:00.0]-2825:2: NodeName = 20000024ff9127de. [ 9.497015] qla2xxx [0001:03:00.0]-2826:2: Manufacturer = QLogic Corporation. [ 9.497051] qla2xxx [0001:03:00.0]-2827:2: Serial no. = RFD1548J28033. [ 9.497089] qla2xxx [0001:03:00.0]-2828:2: Model Name = QLE2562. [ 9.497126] qla2xxx [0001:03:00.0]-2829:2: Model Desc = PCI-Express Dual Channel 8Gb Fibre Channel HBA. [ 9.497178] qla2xxx [0001:03:00.0]-282a:2: Hardware ver = PX2810403-01 R. [ 9.497210] qla2xxx [0001:03:00.0]-282b:2: Driver ver = 10.00.00.02-k-debug. [ 9.497246] qla2xxx [0001:03:00.0]-282c:2: Optrom vers = 3.29. [ 9.497277] qla2xxx [0001:03:00.0]-282d:2: Firmware vers = 8.07.00 (90d5). [ 9.497308] qla2xxx [0001:03:00.0]-282e:2: RHBA identifier = 21000024ff9127de size=220. [ 9.505769] qla2xxx [0001:03:00.0]-2835:2: RHBA exiting normally. [ 9.505802] qla2xxx [0001:03:00.0]-2839:2: FC4_TYPES=01 00. [ 9.505828] qla2xxx [0001:03:00.0]-283a:2: Supported_Speed=1b000000. [ 9.505858] qla2xxx [0001:03:00.0]-283b:2: Current_Speed=8000000. [ 9.505888] qla2xxx [0001:03:00.0]-283c:2: Max_Frame_Size=80000. [ 9.505918] qla2xxx [0001:03:00.0]-284b:2: OS_Device_Name=qla2xxx:host2. [ 9.505948] qla2xxx [0001:03:00.0]-283d:2: HostName=(none). [ 9.505973] qla2xxx [0001:03:00.0]-283e:2: RPA portname 21000024ff9127de, size = 104. [ 9.512502] qla2xxx [0001:03:00.0]-2841:2: RPA exiting normally. [ 9.514280] i40e 0001:09:00.3 enP1p9s0f3: renamed from eth5 [ 9.516928] qla2xxx [0001:03:00.0]-2844:2: RFT_ID exiting normally. [ 9.518236] qla2xxx [0001:03:00.0]-2848:2: RFF_ID exiting normally. [ 9.519433] qla2xxx [0001:03:00.0]-284e:2: RNN_ID exiting normally. [ 9.520729] qla2xxx [0001:03:00.0]-2852:2: RSNN_NN exiting normally. [ 9.520782] qla2xxx [0001:03:00.0]-107ff:2: Async-gpnft hdl=2 FC4Type 8. [ 9.520813] qla2xxx [0001:03:00.0]-2869:2: LOOP READY. [ 9.520837] qla2xxx [0001:03:00.0]-286b:2: qla2x00_configure_loop: exiting normally. [ 9.520874] qla2xxx [0001:03:00.0]-4810:2: Loop resync end. [ 9.520931] qla2xxx [0001:03:00.0]-4800:2: DPC handler sleeping. [ 9.522997] qla2xxx [0001:03:00.0]-107ff:2: Async done-gpnft res 0 FC4Type 8 [ 9.526085] qla2xxx [0001:03:00.0]-107ff:2: qla24xx_async_gpnft_done enter [ 9.533007] qla2xxx [0001:03:00.0]-107ff:2: Async-gnnft hdl=3 FC4Type 8. [ 9.539936] qla2xxx [0001:03:00.0]-107ff:2: Async done-gnnft res 0 FC4Type 8 [ 9.562096] bnx2x 0000:01:00.0 enp1s0f0: renamed from eth1 [ 9.638391] bnx2x 0000:01:00.1 enp1s0f1: renamed from eth4 [ 9.707847] qla2xxx [0001:03:00.0]-480b:2: Reset marker scheduled. [ 9.707880] qla2xxx [0001:03:00.0]-480c:2: Reset marker end. [ 9.707910] qla2xxx [0001:03:00.0]-4800:2: DPC handler sleeping. [ 9.766382] bnx2x 0000:01:00.3 enp1s0f3: renamed from eth2 [ 9.834351] bnx2x 0000:01:00.2 enp1s0f2: renamed from eth0 [ 9.961753] qla2xxx [0001:03:00.0]-5813:2: RSCN database changed -- 0005 0300 0000. [ 9.961808] qla2xxx [0001:03:00.0]-107ff:2: qla24xx_async_gnnft_done enter [ 9.961840] qla2xxx [0001:03:00.0]-107ff:2: qla24xx_async_gnnft_done 3746 50:05:07:68:02:16:5e:37 post new sess [ 9.961888] qla2xxx [0001:03:00.0]-107ff:2: qla24xx_async_gnnft_done 3746 50:05:07:68:02:16:5e:38 post new sess [ 9.961946] qla2xxx [0001:03:00.0]-2867:2: Async-gpnid hdl=4 ID 05:03:00. [ 9.961979] qla2xxx [0001:03:00.0]-4800:2: DPC handler sleeping. [ 9.968415] qla2xxx [0001:03:00.0]-5810:2: Port logout 0000 0007 1700. [ 9.969577] qla2xxx [0001:03:00.0]-5810:2: Port logout 0001 0007 1700. [ 9.969635] qla2xxx [0001:03:00.0]-2866:2: Async done-gpnid fail res 1 rscn gen 0 ID 05:03:00. 00:00:00:00:00:00:00:00 [ 9.969684] qla2xxx [0001:03:00.0]-107ff:2: qla24xx_handle_gpnid_event 3236 port_id: 050300 [ 9.969724] qla2xxx [0001:03:00.0]-107ff:2: qla24xx_create_new_sess 4743 50:05:07:68:02:16:5e:37 enter [ 9.969782] qla2xxx [0001:03:00.0]-28d9:2: Async-gnlist WWPN 50:05:07:68:02:16:5e:37 [ 9.969819] qla2xxx [0001:03:00.0]-28da:2: Async-gnlist - OUT WWPN 50:05:07:68:02:16:5e:37 hndl 5 [ 9.969860] qla2xxx [0001:03:00.0]-107ff:2: qla24xx_create_new_sess 4743 50:05:07:68:02:16:5e:38 enter [ 9.969903] qla2xxx [0001:03:00.0]-28d9:2: Async-gnlist WWPN 50:05:07:68:02:16:5e:38 [ 9.969940] qla2xxx [0001:03:00.0]-28da:2: Async-gnlist - OUT WWPN 50:05:07:68:02:16:5e:38 hndl 6 [ 9.969982] qla2xxx [0001:03:00.0]-4800:2: DPC handler sleeping. [ 9.972108] qla2xxx [0001:03:00.0]-28e7:2: Async done-gnlist res 0 mb[1]=78 mb[2]=c40a [ 9.972146] qla2xxx [0001:03:00.0]-28e1:2: qla24xx_handle_gnl_done_event 469 50:05:07:68:02:16:5e:37 n 3 030900 lid 4096 [ 9.972195] qla2xxx [0001:03:00.0]-28d8:2: qla24xx_fcport_handle_login 50:05:07:68:02:16:5e:37 DS 3 LS 3 P 0 fl 1 confl (null) rscn 0|0 login 0|0 retry 5 lid 4096 scan 2 [ 9.972266] qla2xxx [0001:03:00.0]-28e1:2: qla24xx_handle_gnl_done_event 469 50:05:07:68:02:16:5e:38 n 3 030a00 lid 4096 [ 9.972314] qla2xxx [0001:03:00.0]-28d8:2: qla24xx_fcport_handle_login 50:05:07:68:02:16:5e:38 DS 3 LS 3 P 0 fl 1 confl (null) rscn 0|0 login 0|0 retry 5 lid 4096 scan 2 [ 9.972384] qla2xxx [0001:03:00.0]-2865:2: qla24xx_async_gnl_sp_done 676 21:fa:00:05:1e:02:da:3e post new sess [ 9.972432] qla2xxx [0001:03:00.0]-2865:2: qla24xx_async_gnl_sp_done 676 20:05:00:05:1e:02:da:3e post new sess [ 9.972479] qla2xxx [0001:03:00.0]-2865:2: qla24xx_async_gnl_sp_done 676 21:fc:00:05:1e:02:da:3e post new sess [ 9.972542] qla2xxx [0001:03:00.0]-28e7:2: Async done-gnlist res 0 mb[1]=78 mb[2]=c40a [ 9.972577] qla2xxx [0001:03:00.0]-2865:2: qla24xx_async_gnl_sp_done 676 21:fa:00:05:1e:02:da:3e post new sess [ 9.972624] qla2xxx [0001:03:00.0]-2865:2: qla24xx_async_gnl_sp_done 676 20:05:00:05:1e:02:da:3e post new sess [ 9.972671] qla2xxx [0001:03:00.0]-2865:2: qla24xx_async_gnl_sp_done 676 21:fc:00:05:1e:02:da:3e post new sess [ 9.972723] qla2xxx [0001:03:00.0]-107ff:2: qla24xx_create_new_sess 4743 21:fa:00:05:1e:02:da:3e enter [ 9.972766] qla2xxx [0001:03:00.0]-28d9:2: Async-gnlist WWPN 21:fa:00:05:1e:02:da:3e [ 9.972802] qla2xxx [0001:03:00.0]-28da:2: Async-gnlist - OUT WWPN 21:fa:00:05:1e:02:da:3e hndl 7 [ 9.972843] qla2xxx [0001:03:00.0]-107ff:2: qla24xx_create_new_sess 4743 20:05:00:05:1e:02:da:3e enter [ 9.972886] qla2xxx [0001:03:00.0]-28d9:2: Async-gnlist WWPN 20:05:00:05:1e:02:da:3e [ 9.972922] qla2xxx [0001:03:00.0]-28da:2: Async-gnlist - OUT WWPN 20:05:00:05:1e:02:da:3e hndl 8 [ 9.972963] qla2xxx [0001:03:00.0]-107ff:2: qla24xx_create_new_sess 4743 21:fc:00:05:1e:02:da:3e enter [ 9.973006] qla2xxx [0001:03:00.0]-28d9:2: Async-gnlist WWPN 21:fc:00:05:1e:02:da:3e [ 9.973042] qla2xxx [0001:03:00.0]-28da:2: Async-gnlist - OUT WWPN 21:fc:00:05:1e:02:da:3e hndl 9 [ 9.973083] qla2xxx [0001:03:00.0]-107ff:2: qla24xx_create_new_sess 4743 21:fa:00:05:1e:02:da:3e enter [ 9.973124] qla2xxx [0001:03:00.0]-28d9:2: Async-gnlist WWPN 21:fa:00:05:1e:02:da:3e [ 9.973160] qla2xxx [0001:03:00.0]-107ff:2: qla24xx_create_new_sess 4743 20:05:00:05:1e:02:da:3e enter [ 9.976695] qla2xxx [0001:03:00.0]-28e7:2: Async done-gnlist res 0 mb[1]=78 mb[2]=c40a [ 9.976696] qla2xxx [0001:03:00.0]-28e1:2: qla24xx_handle_gnl_done_event 469 21:fa:00:05:1e:02:da:3e n 3 faffff lid 4096 [ 9.976698] qla2xxx [0001:03:00.0]-28e2:2: qla24xx_handle_gnl_done_event found 21:fa:00:05:1e:02:da:3e CLS [4|3] ID[fffffa|faffff] lid[10|4096] [ 9.976700] qla2xxx [0001:03:00.0]-28e3:2: qla24xx_handle_gnl_done_event 502 21:fa:00:05:1e:02:da:3e post del sess [ 9.976703] qla2xxx [0001:03:00.0]-28e1:2: qla24xx_handle_gnl_done_event 469 20:05:00:05:1e:02:da:3e n 3 feffff lid 4096 [ 9.976705] qla2xxx [0001:03:00.0]-28e2:2: qla24xx_handle_gnl_done_event found 20:05:00:05:1e:02:da:3e CLS [4|3] ID[fffffe|feffff] lid[2046|4096] [ 9.976705] qla2xxx [0001:03:00.0]-28e3:2: qla24xx_handle_gnl_done_event 502 20:05:00:05:1e:02:da:3e post del sess [ 9.976707] qla2xxx [0001:03:00.0]-28e1:2: qla24xx_handle_gnl_done_event 469 21:fc:00:05:1e:02:da:3e n 3 fcffff lid 4096 [ 9.976709] qla2xxx [0001:03:00.0]-28e2:2: qla24xx_handle_gnl_done_event found 21:fc:00:05:1e:02:da:3e CLS [4|3] ID[fffffc|fcffff] lid[2044|4096] [ 9.976710] qla2xxx [0001:03:00.0]-28e3:2: qla24xx_handle_gnl_done_event 502 21:fc:00:05:1e:02:da:3e post del sess [ 9.976711] qla2xxx [0001:03:00.0]-28e7:2: Async done-gnlist res 0 mb[1]=78 mb[2]=c40a [ 9.976713] qla2xxx [0001:03:00.0]-28e7:2: Async done-gnlist res 0 mb[1]=78 mb[2]=c40a [ 9.986407] scsi host4: qla2xxx [ 9.986410] qla2xxx [0001:03:00.1]-4800:4: DPC handler sleeping. [ 9.987230] qla2xxx [0001:03:00.1]-00fb:4: QLogic QLE2562 - PCI-Express Dual Channel 8Gb Fibre Channel HBA. [ 9.987238] qla2xxx [0001:03:00.1]-00fc:4: ISP2532: PCIe (5.0GT/s x8) @ 0001:03:00.1 hdma+ host#=4 fw=8.07.00 (90d5). [ 10.055234] qla2xxx [0001:03:00.0]-5812:2: Port database changed 0002 0004 0600. [ 10.056755] qla2xxx [0001:03:00.0]-5810:2: Port logout 0002 0007 0b00. [ 10.145883] qla2xxx [0001:03:00.0]-28d9:2: Async-gnlist WWPN 20:05:00:05:1e:02:da:3e [ 10.145893] qla2xxx [0001:03:00.0]-290a:2: qlt_unreg_sess sess 00000000b35226d6 for deletion 21:fa:00:05:1e:02:da:3e [ 10.145895] qla2xxx [0001:03:00.0]-28da:2: Async-gnlist - OUT WWPN 20:05:00:05:1e:02:da:3e hndl a [ 10.145897] qla2xxx [0001:03:00.0]-287d:2: FCPort 21:fa:00:05:1e:02:da:3e state transitioned from UNCONFIGURED to LOST - portid=faffff. [ 10.145899] qla2xxx [0001:03:00.0]-107ff:2: qla24xx_create_new_sess 4743 21:fc:00:05:1e:02:da:3e enter [ 10.145901] qla2xxx [0001:03:00.0]-290a:2: qlt_unreg_sess sess 00000000a72cf7ec for deletion 20:05:00:05:1e:02:da:3e [ 10.145904] qla2xxx [0001:03:00.0]-287d:2: FCPort 20:05:00:05:1e:02:da:3e state transitioned from UNCONFIGURED to LOST - portid=feffff. [ 10.145906] qla2xxx [0001:03:00.0]-28d9:2: Async-gnlist WWPN 21:fc:00:05:1e:02:da:3e [ 10.145908] qla2xxx [0001:03:00.0]-290a:2: qlt_unreg_sess sess 00000000b5a578e9 for deletion 21:fc:00:05:1e:02:da:3e [ 10.145910] qla2xxx [0001:03:00.0]-287d:2: FCPort 21:fc:00:05:1e:02:da:3e state transitioned from UNCONFIGURED to LOST - portid=fcffff. [ 10.145913] qla2xxx [0001:03:00.0]-28da:2: Async-gnlist - OUT WWPN 21:fc:00:05:1e:02:da:3e hndl b [ 10.145915] qla2xxx [0001:03:00.0]-480f:2: Loop resync scheduled. [ 10.148081] qla2xxx [0001:03:00.0]-8837:2: F/W Ready - OK. [ 10.149214] qla2xxx [0001:03:00.0]-28e7:2: Async done-gnlist res 0 mb[1]=78 mb[2]=c40a [ 10.149216] qla2xxx [0001:03:00.0]-28e1:2: qla24xx_handle_gnl_done_event 469 20:05:00:05:1e:02:da:3e n 3 feffff lid 4096 [ 10.149218] qla2xxx [0001:03:00.0]-28e2:2: qla24xx_handle_gnl_done_event found 20:05:00:05:1e:02:da:3e CLS [4|7] ID[fffffe|feffff] lid[2046|4096] [ 10.149219] qla2xxx [0001:03:00.0]-28e3:2: qla24xx_handle_gnl_done_event 502 20:05:00:05:1e:02:da:3e post del sess [ 10.149221] qla2xxx [0001:03:00.0]-28e1:2: qla24xx_handle_gnl_done_event 469 21:fc:00:05:1e:02:da:3e n 3 fcffff lid 4096 [ 10.149222] qla2xxx [0001:03:00.0]-28e2:2: qla24xx_handle_gnl_done_event found 21:fc:00:05:1e:02:da:3e CLS [4|7] ID[fffffc|fcffff] lid[2044|4096] [ 10.149223] qla2xxx [0001:03:00.0]-28e3:2: qla24xx_handle_gnl_done_event 502 21:fc:00:05:1e:02:da:3e post del sess [ 10.149225] qla2xxx [0001:03:00.0]-28e7:2: Async done-gnlist res 0 mb[1]=78 mb[2]=c40a [ 10.149249] qla2xxx [0001:03:00.0]-883a:2: fw_state=3 (3, 1c0, 0, 4 800) curr time=fffee341. [ 10.149278] qla2xxx [0001:03:00.0]-280e:2: HBA in F P2P topology. [ 10.149279] qla2xxx [0001:03:00.0]-2814:2: Configure loop -- dpc flags = 0x160. [ 10.152486] qla2xxx [0001:03:00.0]-107ff:2: Async-gpnft hdl=c FC4Type 8. [ 10.152486] qla2xxx [0001:03:00.0]-2869:2: LOOP READY. [ 10.152487] qla2xxx [0001:03:00.0]-286b:2: qla2x00_configure_loop: exiting normally. [ 10.152488] qla2xxx [0001:03:00.0]-4810:2: Loop resync end. [ 10.152490] qla2xxx [0001:03:00.0]-4800:2: DPC handler sleeping. [ 10.153828] qla2xxx [0001:03:00.0]-107ff:2: Async done-gpnft res 0 FC4Type 8 [ 10.153843] qla2xxx [0001:03:00.0]-107ff:2: qla24xx_async_gpnft_done enter [ 10.153847] qla2xxx [0001:03:00.0]-107ff:2: Async-gnnft hdl=d FC4Type 8. [ 10.153848] qla2xxx [0001:03:00.0]-480d:2: Relogin scheduled. [ 10.153849] qla2xxx [0001:03:00.0]-2908:2: qla2x00_relogin 50:05:07:68:02:16:5e:37 DS 3 LS 3 [ 10.153850] qla2xxx [0001:03:00.0]-2908:2: qla2x00_relogin 50:05:07:68:02:16:5e:38 DS 3 LS 3 [ 10.153851] qla2xxx [0001:03:00.0]-2908:2: qla2x00_relogin 21:fa:00:05:1e:02:da:3e DS 0 LS 7 [ 10.153852] qla2xxx [0001:03:00.0]-2908:2: qla2x00_relogin 20:05:00:05:1e:02:da:3e DS 0 LS 7 [ 10.153853] qla2xxx [0001:03:00.0]-2908:2: qla2x00_relogin 21:fc:00:05:1e:02:da:3e DS 0 LS 7 [ 10.153854] qla2xxx [0001:03:00.0]-480e:2: Relogin end. [ 10.153855] qla2xxx [0001:03:00.0]-4800:2: DPC handler sleeping. [ 10.155204] qla2xxx [0001:03:00.0]-107ff:2: Async done-gnnft res 0 FC4Type 8 [ 10.155219] qla2xxx [0001:03:00.0]-107ff:2: qla24xx_async_gnnft_done enter [ 10.155225] qla2xxx [0001:03:00.0]-28d8:2: qla24xx_fcport_handle_login 50:05:07:68:02:16:5e:37 DS 3 LS 3 P 0 fl 1 confl (null) rscn 0|0 login 0|0 retry 6 lid 4096 scan 2 [ 10.155227] qla2xxx [0001:03:00.0]-28d8:2: qla24xx_fcport_handle_login 50:05:07:68:02:16:5e:38 DS 3 LS 3 P 0 fl 1 confl (null) rscn 0|0 login 0|0 retry 6 lid 4096 scan 2 [ 10.155229] qla2xxx [0001:03:00.0]-4800:2: DPC handler sleeping. Begin: Loading essential drivers ... [ 10.682121] raid6: altivecx1 gen() 6313 MB/s [ 10.730123] raid6: altivecx2 gen() 11130 MB/s [ 10.747031] qla2xxx [0001:03:00.1]-580c:4: LIP reset occurred (f700). [ 10.747074] qla2xxx [0001:03:00.1]-480b:4: Reset marker scheduled. [ 10.747105] qla2xxx [0001:03:00.1]-480c:4: Reset marker end. [ 10.747136] qla2xxx [0001:03:00.1]-480f:4: Loop resync scheduled. [ 10.770804] qla2xxx [0001:03:00.1]-580e:4: Asynchronous P2P MODE received. [ 10.778123] raid6: altivecx4 gen() 12484 MB/s [ 10.789950] qla2xxx [0001:03:00.1]-18b9:4: Format 1: VP[0] enabled - status 0 - with port id 050300. [ 10.789993] qla2xxx [0001:03:00.1]-5875:4: Format 1: Remote WWPN 20:03:00:05:1e:02:da:3e. [ 10.790029] qla2xxx [0001:03:00.1]-5875:4: Format 1: WWPN 21:00:00:24:ff:91:27:df. [ 10.792403] qla2xxx [0001:03:00.1]-500a:4: LOOP UP detected (4 Gbps). [ 10.792446] qla2xxx [0001:03:00.1]-5812:4: Port database changed ffff 0006 0000. [ 10.826123] raid6: altivecx8 gen() 11046 MB/s [ 10.874131] raid6: int64x1 gen() 4078 MB/s [ 10.922126] raid6: int64x1 xor() 1489 MB/s [ 10.970126] raid6: int64x2 gen() 7118 MB/s [ 11.018121] raid6: int64x2 xor() 2624 MB/s [ 11.066122] raid6: int64x4 gen() 8604 MB/s [ 11.114120] raid6: int64x4 xor() 3265 MB/s [ 11.162130] raid6: int64x8 gen() 5015 MB/s [ 11.210128] raid6: int64x8 xor() 2051 MB/s [ 11.210156] raid6: using algorithm altivecx4 gen() 12484 MB/s [ 11.210185] raid6: using intx1 recovery algorithm [ 11.211518] xor: measuring software checksum speed [ 11.250118] 8regs : 14544.000 MB/sec [ 11.255166] qla2xxx [0001:03:00.1]-8837:4: F/W Ready - OK. [ 11.255213] qla2xxx [0001:03:00.1]-883a:4: fw_state=3 (3, 100, 0, 4 800) curr time=fffee456. [ 11.255299] qla2xxx [0001:03:00.1]-280e:4: HBA in F P2P topology. [ 11.255329] qla2xxx [0001:03:00.1]-2814:4: Configure loop -- dpc flags = 0x200152e1. [ 11.258226] qla2xxx [0001:03:00.1]-287d:4: NodeName = 20000024ff9127df. [ 11.258257] qla2xxx [0001:03:00.1]-28a5:4: Manufacturer = QLogic Corporation. [ 11.258293] qla2xxx [0001:03:00.1]-28a6:4: Serial no. = RFD1548J28033. [ 11.258323] qla2xxx [0001:03:00.1]-28a7:4: Model Name = QLE2562. [ 11.258353] qla2xxx [0001:03:00.1]-28a8:4: Model Desc = PCI-Express Dual Channel 8Gb Fibre Channel HBA. [ 11.258394] qla2xxx [0001:03:00.1]-28a9:4: Hardware ver = PX2810403-01 R. [ 11.258424] qla2xxx [0001:03:00.1]-28aa:4: Driver ver = 10.00.00.02-k-debug. [ 11.258460] qla2xxx [0001:03:00.1]-28ab:4: Optrom version = 46.51. [ 11.258491] qla2xxx [0001:03:00.1]-28ac:4: Firmware vers = 8.07.00 (90d5). [ 11.258521] qla2xxx [0001:03:00.1]-28ae:4: OS Name and Version = Linux 4.15.0-21-generic #22~lp1770003+build.1-Ubuntu SMP Thu May 10 21:34:00 UTC 2018. [ 11.258579] qla2xxx [0001:03:00.1]-28af:4: CT Payload Length = 0x80000. [ 11.258610] qla2xxx [0001:03:00.1]-28b0:4: Symbolic Name = QLE2562 FW:v8.07.00 DVR:v10.00.00.02-k-debug. [ 11.258651] qla2xxx [0001:03:00.1]-28b1:4: Vendor Id = 77100000. [ 11.258680] qla2xxx [0001:03:00.1]-28b2:4: Port Num = 1000000. [ 11.258710] qla2xxx [0001:03:00.1]-28b3:4: Fabric Name = 100000051e02da3e. [ 11.258740] qla2xxx [0001:03:00.1]-28b4:4: BIOS Name = BIOS 3.29 [ 11.258770] qla2xxx [0001:03:00.1]-281b:4: Vendor Identifier = QLGC. [ 11.258800] qla2xxx [0001:03:00.1]-28b5:4: RHBA identifier = 21000024ff9127df. [ 11.260051] qla2xxx [0001:03:00.1]-2816:4: RHBA FDMI v2 failed, CT Reason code: 0x9, CT Explanation 0x0 [ 11.260093] qla2xxx [0001:03:00.1]-2825:4: NodeName = 20000024ff9127df. [ 11.260123] qla2xxx [0001:03:00.1]-2826:4: Manufacturer = QLogic Corporation. [ 11.260158] qla2xxx [0001:03:00.1]-2827:4: Serial no. = RFD1548J28033. [ 11.260188] qla2xxx [0001:03:00.1]-2828:4: Model Name = QLE2562. [ 11.260217] qla2xxx [0001:03:00.1]-2829:4: Model Desc = PCI-Express Dual Channel 8Gb Fibre Channel HBA. [ 11.260259] qla2xxx [0001:03:00.1]-282a:4: Hardware ver = PX2810403-01 R. [ 11.260288] qla2xxx [0001:03:00.1]-282b:4: Driver ver = 10.00.00.02-k-debug. [ 11.260324] qla2xxx [0001:03:00.1]-282c:4: Optrom vers = 3.29. [ 11.260354] qla2xxx [0001:03:00.1]-282d:4: Firmware vers = 8.07.00 (90d5). [ 11.260384] qla2xxx [0001:03:00.1]-282e:4: RHBA identifier = 21000024ff9127df size=220. [ 11.267969] qla2xxx [0001:03:00.1]-2835:4: RHBA exiting normally. [ 11.268000] qla2xxx [0001:03:00.1]-2839:4: FC4_TYPES=01 00. [ 11.268025] qla2xxx [0001:03:00.1]-283a:4: Supported_Speed=1b000000. [ 11.268054] qla2xxx [0001:03:00.1]-283b:4: Current_Speed=8000000. [ 11.268084] qla2xxx [0001:03:00.1]-283c:4: Max_Frame_Size=80000. [ 11.268114] qla2xxx [0001:03:00.1]-284b:4: OS_Device_Name=qla2xxx:host4. [ 11.268144] qla2xxx [0001:03:00.1]-283d:4: HostName=(none). [ 11.268168] qla2xxx [0001:03:00.1]-283e:4: RPA portname 21000024ff9127df, size = 104. [ 11.274785] qla2xxx [0001:03:00.1]-2841:4: RPA exiting normally. [ 11.280500] qla2xxx [0001:03:00.1]-2844:4: RFT_ID exiting normally. [ 11.282623] qla2xxx [0001:03:00.1]-2848:4: RFF_ID exiting normally. [ 11.283790] qla2xxx [0001:03:00.1]-284e:4: RNN_ID exiting normally. [ 11.285141] qla2xxx [0001:03:00.1]-2852:4: RSNN_NN exiting normally. [ 11.285192] qla2xxx [0001:03:00.1]-107ff:4: Async-gpnft hdl=2 FC4Type 8. [ 11.285222] qla2xxx [0001:03:00.1]-2869:4: LOOP READY. [ 11.285246] qla2xxx [0001:03:00.1]-286b:4: qla2x00_configure_loop: exiting normally. [ 11.285281] qla2xxx [0001:03:00.1]-4810:4: Loop resync end. [ 11.285338] qla2xxx [0001:03:00.1]-4800:4: DPC handler sleeping. [ 11.286528] qla2xxx [0001:03:00.1]-107ff:4: Async done-gpnft res 0 FC4Type 8 [ 11.286578] qla2xxx [0001:03:00.1]-107ff:4: qla24xx_async_gpnft_done enter [ 11.286611] qla2xxx [0001:03:00.1]-107ff:4: Async-gnnft hdl=3 FC4Type 8. [ 11.290122] 8regs_prefetch: 11952.000 MB/sec [ 11.326886] qla2xxx [0001:03:00.1]-107ff:4: Async done-gnnft res 0 FC4Type 8 [ 11.330119] 32regs : 14704.000 MB/sec [ 11.370118] 32regs_prefetch: 12992.000 MB/sec [ 11.410120] altivec : 16784.000 MB/sec [ 11.410143] xor: using function: altivec (16784.000 MB/sec) [ 11.411209] async_tx: api initialized (async) done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... [ 11.447660] qla2xxx [0001:03:00.1]-480b:4: Reset marker scheduled. [ 11.447690] qla2xxx [0001:03:00.1]-480c:4: Reset marker end. [ 11.447720] qla2xxx [0001:03:00.1]-4800:4: DPC handler sleeping. [ 11.471506] Btrfs loaded, crc32c=crc32c-vpmsum Scanning for Btrfs filesystems done. Begin: Will now check root file system ... fsck from util-linux 2.31.1 [/sbin/fsck.ext4 (1) -- /dev/sda2] fsck.ext4 -a -C0 /dev/sda2 /dev/sda2: clean, 79415/122101760 files, 9054079/488376576 blocks done. [ 11.686121] qla2xxx [0001:03:00.1]-5810:4: Port logout 0000 0007 1700. [ 11.686817] qla2xxx [0001:03:00.1]-5810:4: Port logout 0001 0007 1700. [ 11.693985] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 11.834478] qla2xxx [0001:03:00.1]-5812:4: Port database changed 0002 0004 0600. [ 11.836007] qla2xxx [0001:03:00.1]-5810:4: Port logout 0002 0007 0b00. [ 12.030134] qla2xxx [0001:03:00.1]-107ff:4: qla24xx_async_gnnft_done enter [ 12.030179] qla2xxx [0001:03:00.1]-107ff:4: qla24xx_async_gnnft_done 3746 21:00:00:24:ff:91:27:de post new sess [ 12.030228] qla2xxx [0001:03:00.1]-107ff:4: qla24xx_async_gnnft_done 3746 50:05:07:68:02:16:5e:37 post new sess [ 12.030277] qla2xxx [0001:03:00.1]-107ff:4: qla24xx_async_gnnft_done 3746 50:05:07:68:02:16:5e:38 post new sess [ 12.030332] qla2xxx [0001:03:00.1]-480f:4: Loop resync scheduled. [ 12.031409] qla2xxx [0001:03:00.1]-8837:4: F/W Ready - OK. [ 12.031452] qla2xxx [0001:03:00.1]-883a:4: fw_state=3 (3, 1c0, 0, 4 800) curr time=fffee518. [ 12.031520] qla2xxx [0001:03:00.1]-280e:4: HBA in F P2P topology. [ 12.031551] qla2xxx [0001:03:00.1]-2814:4: Configure loop -- dpc flags = 0x60. [ 12.033249] qla2xxx [0001:03:00.1]-107ff:4: Async-gpnft hdl=4 FC4Type 8. [ 12.033280] qla2xxx [0001:03:00.1]-2869:4: LOOP READY. [ 12.033304] qla2xxx [0001:03:00.1]-286b:4: qla2x00_configure_loop: exiting normally. [ 12.033339] qla2xxx [0001:03:00.1]-4810:4: Loop resync end. [ 12.033363] qla2xxx [0001:03:00.1]-4800:4: DPC handler sleeping. [ 12.034703] qla2xxx [0001:03:00.1]-107ff:4: Async done-gpnft res 0 FC4Type 8 [ 12.034754] qla2xxx [0001:03:00.1]-107ff:4: qla24xx_create_new_sess 4743 21:00:00:24:ff:91:27:de enter [ 12.034797] qla2xxx [0001:03:00.1]-28d9:4: Async-gnlist WWPN 21:00:00:24:ff:91:27:de [ 12.034834] qla2xxx [0001:03:00.1]-28da:4: Async-gnlist - OUT WWPN 21:00:00:24:ff:91:27:de hndl 5 [ 12.034876] qla2xxx [0001:03:00.1]-107ff:4: qla24xx_create_new_sess 4743 50:05:07:68:02:16:5e:37 enter [ 12.034918] qla2xxx [0001:03:00.1]-28d9:4: Async-gnlist WWPN 50:05:07:68:02:16:5e:37 [ 12.034954] qla2xxx [0001:03:00.1]-28da:4: Async-gnlist - OUT WWPN 50:05:07:68:02:16:5e:37 hndl 6 [ 12.034996] qla2xxx [0001:03:00.1]-107ff:4: qla24xx_create_new_sess 4743 50:05:07:68:02:16:5e:38 enter [ 12.035053] qla2xxx [0001:03:00.1]-28d9:4: Async-gnlist WWPN 50:05:07:68:02:16:5e:38 [ 12.035089] qla2xxx [0001:03:00.1]-28da:4: Async-gnlist - OUT WWPN 50:05:07:68:02:16:5e:38 hndl 7 [ 12.035131] qla2xxx [0001:03:00.1]-107ff:4: qla24xx_async_gpnft_done enter [ 12.035163] qla2xxx [0001:03:00.1]-107ff:4: Async-gnnft hdl=8 FC4Type 8. [ 12.035193] qla2xxx [0001:03:00.1]-4800:4: DPC handler sleeping. [ 12.037124] qla2xxx [0001:03:00.1]-28e7:4: Async done-gnlist res 0 mb[1]=78 mb[2]=be6a [ 12.037162] qla2xxx [0001:03:00.1]-28e1:4: qla24xx_handle_gnl_done_event 469 21:00:00:24:ff:91:27:de n 3 050500 lid 4096 [ 12.037211] qla2xxx [0001:03:00.1]-28d8:4: qla24xx_fcport_handle_login 21:00:00:24:ff:91:27:de DS 3 LS 3 P 0 fl 1 confl (null) rscn 0|0 login 0|0 retry 5 lid 4096 scan 2 [ 12.037281] qla2xxx [0001:03:00.1]-28e1:4: qla24xx_handle_gnl_done_event 469 50:05:07:68:02:16:5e:37 n 3 030900 lid 4096 [ 12.037329] qla2xxx [0001:03:00.1]-28d8:4: qla24xx_fcport_handle_login 50:05:07:68:02:16:5e:37 DS 3 LS 3 P 0 fl 1 confl (null) rscn 0|0 login 0|0 retry 5 lid 4096 scan 2 [ 12.037399] qla2xxx [0001:03:00.1]-28e1:4: qla24xx_handle_gnl_done_event 469 50:05:07:68:02:16:5e:38 n 3 030a00 lid 4096 [ 12.037447] qla2xxx [0001:03:00.1]-28d8:4: qla24xx_fcport_handle_login 50:05:07:68:02:16:5e:38 DS 3 LS 3 P 0 fl 1 confl (null) rscn 0|0 login 0|0 retry 5 lid 4096 scan 2 [ 12.037517] qla2xxx [0001:03:00.1]-2865:4: qla24xx_async_gnl_sp_done 676 21:fa:00:05:1e:02:da:3e post new sess [ 12.037565] qla2xxx [0001:03:00.1]-2865:4: qla24xx_async_gnl_sp_done 676 20:03:00:05:1e:02:da:3e post new sess [ 12.037612] qla2xxx [0001:03:00.1]-2865:4: qla24xx_async_gnl_sp_done 676 21:fc:00:05:1e:02:da:3e post new sess [ 12.037662] qla2xxx [0001:03:00.1]-107ff:4: qla24xx_create_new_sess 4743 21:fa:00:05:1e:02:da:3e enter [ 12.037704] qla2xxx [0001:03:00.1]-28d9:4: Async-gnlist WWPN 21:fa:00:05:1e:02:da:3e [ 12.037741] qla2xxx [0001:03:00.1]-28da:4: Async-gnlist - OUT WWPN 21:fa:00:05:1e:02:da:3e hndl 9 [ 12.037798] qla2xxx [0001:03:00.1]-107ff:4: qla24xx_create_new_sess 4743 20:03:00:05:1e:02:da:3e enter [ 12.037840] qla2xxx [0001:03:00.1]-28d9:4: Async-gnlist WWPN 20:03:00:05:1e:02:da:3e [ 12.041958] qla2xxx [0001:03:00.1]-28e7:4: Async done-gnlist res 0 mb[1]=78 mb[2]=be6a [ 12.041960] qla2xxx [0001:03:00.1]-28e1:4: qla24xx_handle_gnl_done_event 469 21:fa:00:05:1e:02:da:3e n 3 faffff lid 4096 [ 12.041962] qla2xxx [0001:03:00.1]-28e2:4: qla24xx_handle_gnl_done_event found 21:fa:00:05:1e:02:da:3e CLS [4|3] ID[fffffa|faffff] lid[10|4096] [ 12.041963] qla2xxx [0001:03:00.1]-28e3:4: qla24xx_handle_gnl_done_event 502 21:fa:00:05:1e:02:da:3e post del sess [ 12.041966] qla2xxx [0001:03:00.1]-2865:4: qla24xx_async_gnl_sp_done 676 21:fc:00:05:1e:02:da:3e post new sess [ 12.041968] qla2xxx [0001:03:00.1]-28e7:4: Async done-gnlist res 0 mb[1]=78 mb[2]=be6a [ 12.041969] qla2xxx [0001:03:00.1]-2865:4: qla24xx_async_gnl_sp_done 676 21:fc:00:05:1e:02:da:3e post new sess [ 12.041971] qla2xxx [0001:03:00.1]-28e7:4: Async done-gnlist res 0 mb[1]=78 mb[2]=be6a [ 12.041972] qla2xxx [0001:03:00.1]-2865:4: qla24xx_async_gnl_sp_done 676 21:fc:00:05:1e:02:da:3e post new sess [ 12.041979] qla2xxx [0001:03:00.1]-107ff:4: Async done-gnnft res 0 FC4Type 8 [ 12.136268] qla2xxx [0001:03:00.1]-28da:4: Async-gnlist - OUT WWPN 20:03:00:05:1e:02:da:3e hndl a [ 12.136271] qla2xxx [0001:03:00.1]-290a:4: qlt_unreg_sess sess 00000000219afae7 for deletion 21:fa:00:05:1e:02:da:3e [ 12.136274] qla2xxx [0001:03:00.1]-287d:4: FCPort 21:fa:00:05:1e:02:da:3e state transitioned from UNCONFIGURED to LOST - portid=faffff. [ 12.137419] qla2xxx [0001:03:00.1]-28e7:4: Async done-gnlist res 0 mb[1]=78 mb[2]=be6a [ 12.137421] qla2xxx [0001:03:00.1]-28e1:4: qla24xx_handle_gnl_done_event 469 20:03:00:05:1e:02:da:3e n 3 feffff lid 4096 [ 12.137423] qla2xxx [0001:03:00.1]-28e2:4: qla24xx_handle_gnl_done_event found 20:03:00:05:1e:02:da:3e CLS [4|3] ID[fffffe|feffff] lid[2046|4096] [ 12.137425] qla2xxx [0001:03:00.1]-28e3:4: qla24xx_handle_gnl_done_event 502 20:03:00:05:1e:02:da:3e post del sess [ 12.137427] qla2xxx [0001:03:00.1]-2865:4: qla24xx_async_gnl_sp_done 676 21:fc:00:05:1e:02:da:3e post new sess [ 12.137433] qla2xxx [0001:03:00.1]-290a:4: qlt_unreg_sess sess 000000006626430f for deletion 20:03:00:05:1e:02:da:3e [ 12.137435] qla2xxx [0001:03:00.1]-287d:4: FCPort 20:03:00:05:1e:02:da:3e state transitioned from UNCONFIGURED to LOST - portid=feffff. [ 12.191796] qla2xxx [0001:03:00.0]-5813:2: RSCN database changed -- 0005 0300 0000. [ 12.191809] qla2xxx [0001:03:00.0]-2867:2: Async-gpnid hdl=e ID 05:03:00. [ 12.191813] qla2xxx [0001:03:00.0]-4800:2: DPC handler sleeping. [ 12.193426] qla2xxx [0001:03:00.0]-2866:2: Async done-gpnid good rscn gen 0 ID 05:03:00. 21:00:00:24:ff:91:27:df [ 12.193428] qla2xxx [0001:03:00.0]-107ff:2: qla24xx_handle_gpnid_event 3236 port_id: 050300 [ 12.193430] qla2xxx [0001:03:00.0]-2865:2: qla24xx_handle_gpnid_event 3358 21:00:00:24:ff:91:27:df post new sess [ 12.193437] qla2xxx [0001:03:00.0]-107ff:2: qla24xx_create_new_sess 4743 21:00:00:24:ff:91:27:df enter [ 12.193441] qla2xxx [0001:03:00.0]-107ff:2: Async-gnnid - 21:00:00:24:ff:91:27:df hdl=f loopid=1000 portid 050300. [ 12.193443] qla2xxx [0001:03:00.0]-4800:2: DPC handler sleeping. [ 12.194732] qla2xxx [0001:03:00.0]-284f:2: Async done-gnnid res 0, WWPN 21:00:00:24:ff:91:27:df 20:00:00:24:ff:91:27:df [ 12.194738] qla2xxx [0001:03:00.0]-28d9:2: Async-gnlist WWPN 21:00:00:24:ff:91:27:df [ 12.194740] qla2xxx [0001:03:00.0]-28da:2: Async-gnlist - OUT WWPN 21:00:00:24:ff:91:27:df hndl 10 [ 12.194741] qla2xxx [0001:03:00.0]-4800:2: DPC handler sleeping. [ 12.195891] qla2xxx [0001:03:00.0]-28e7:2: Async done-gnlist res 0 mb[1]=78 mb[2]=c40a [ 12.195894] qla2xxx [0001:03:00.0]-28e1:2: qla24xx_handle_gnl_done_event 469 21:00:00:24:ff:91:27:df n 3 050300 lid 4096 [ 12.195896] qla2xxx [0001:03:00.0]-28d8:2: qla24xx_fcport_handle_login 21:00:00:24:ff:91:27:df DS 3 LS 3 P 0 fl 1 confl (null) rscn 0|0 login 0|0 retry 5 lid 4096 scan 2 [ 12.385865] qla2xxx [0001:03:00.1]-107ff:4: qla24xx_create_new_sess 4743 21:fc:00:05:1e:02:da:3e enter [ 12.385870] qla2xxx [0001:03:00.1]-28d9:4: Async-gnlist WWPN 21:fc:00:05:1e:02:da:3e [ 12.385872] qla2xxx [0001:03:00.1]-28da:4: Async-gnlist - OUT WWPN 21:fc:00:05:1e:02:da:3e hndl b [ 12.385873] qla2xxx [0001:03:00.1]-480d:4: Relogin scheduled. [ 12.385874] qla2xxx [0001:03:00.1]-2908:4: qla2x00_relogin 21:00:00:24:ff:91:27:de DS 3 LS 3 [ 12.385877] qla2xxx [0001:03:00.1]-2902:4: qla24xx_handle_relogin_event 21:00:00:24:ff:91:27:de DS 3 LS 3 P 0 del 2 cnfl (null) rscn 0|0 login 0|0 fl 1 [ 12.385878] qla2xxx [0001:03:00.1]-2908:4: qla2x00_relogin 50:05:07:68:02:16:5e:37 DS 3 LS 3 [ 12.385880] qla2xxx [0001:03:00.1]-2902:4: qla24xx_handle_relogin_event 50:05:07:68:02:16:5e:37 DS 3 LS 3 P 0 del 2 cnfl (null) rscn 0|0 login 0|0 fl 1 [ 12.385881] qla2xxx [0001:03:00.1]-2908:4: qla2x00_relogin 50:05:07:68:02:16:5e:38 DS 3 LS 3 [ 12.385882] qla2xxx [0001:03:00.1]-2902:4: qla24xx_handle_relogin_event 50:05:07:68:02:16:5e:38 DS 3 LS 3 P 0 del 2 cnfl (null) rscn 0|0 login 0|0 fl 1 [ 12.385883] qla2xxx [0001:03:00.1]-2908:4: qla2x00_relogin 21:fa:00:05:1e:02:da:3e DS 0 LS 7 [ 12.385884] qla2xxx [0001:03:00.1]-2902:4: qla24xx_handle_relogin_event 21:fa:00:05:1e:02:da:3e DS 0 LS 7 P 0 del 2 cnfl (null) rscn 0|0 login 0|0 fl 1 [ 12.385887] qla2xxx [0001:03:00.1]-28d8:4: qla24xx_fcport_handle_login 21:fa:00:05:1e:02:da:3e DS 0 LS 7 P 0 fl 1 confl (null) rscn 0|0 login 0|0 retry 30 lid 4096 scan 2 [ 12.385888] qla2xxx [0001:03:00.1]-28bd:4: qla24xx_fcport_handle_login 1180 21:fa:00:05:1e:02:da:3e post gnl [ 12.385889] qla2xxx [0001:03:00.1]-2908:4: qla2x00_relogin 20:03:00:05:1e:02:da:3e DS 0 LS 7 [ 12.385891] qla2xxx [0001:03:00.1]-2902:4: qla24xx_handle_relogin_event 20:03:00:05:1e:02:da:3e DS 0 LS 7 P 0 del 2 cnfl (null) rscn 0|0 login 0|0 fl 1 [ 12.385892] qla2xxx [0001:03:00.1]-28d8:4: qla24xx_fcport_handle_login 20:03:00:05:1e:02:da:3e DS 0 LS 7 P 0 fl 1 confl (null) rscn 0|0 login 0|0 retry 30 lid 4096 scan 2 [ 12.385893] qla2xxx [0001:03:00.1]-28bd:4: qla24xx_fcport_handle_login 1180 20:03:00:05:1e:02:da:3e post gnl [ 12.385894] qla2xxx [0001:03:00.1]-2908:4: qla2x00_relogin 21:fc:00:05:1e:02:da:3e DS 3 LS 3 [ 12.385896] qla2xxx [0001:03:00.1]-2902:4: qla24xx_handle_relogin_event 21:fc:00:05:1e:02:da:3e DS 3 LS 3 P 0 del 2 cnfl (null) rscn 0|0 login 0|0 fl 1 [ 12.385897] qla2xxx [0001:03:00.1]-480e:4: Relogin end. [ 12.385898] qla2xxx [0001:03:00.1]-4800:4: DPC handler sleeping. [ 12.387024] qla2xxx [0001:03:00.1]-28e7:4: Async done-gnlist res 0 mb[1]=78 mb[2]=be6a [ 12.387025] qla2xxx [0001:03:00.1]-28e1:4: qla24xx_handle_gnl_done_event 469 21:fc:00:05:1e:02:da:3e n 3 fcffff lid 4096 [ 12.387027] qla2xxx [0001:03:00.1]-28e2:4: qla24xx_handle_gnl_done_event found 21:fc:00:05:1e:02:da:3e CLS [4|3] ID[fffffc|fcffff] lid[2044|4096] [ 12.387028] qla2xxx [0001:03:00.1]-28e3:4: qla24xx_handle_gnl_done_event 502 21:fc:00:05:1e:02:da:3e post del sess [ 12.387034] qla2xxx [0001:03:00.1]-290a:4: qlt_unreg_sess sess 000000002760e0cd for deletion 21:fc:00:05:1e:02:da:3e [ 12.387036] qla2xxx [0001:03:00.1]-287d:4: FCPort 21:fc:00:05:1e:02:da:3e state transitioned from UNCONFIGURED to LOST - portid=fcffff. [ 12.387042] qla2xxx [0001:03:00.1]-107ff:4: qla24xx_create_new_sess 4743 21:fc:00:05:1e:02:da:3e enter [ 12.387043] qla2xxx [0001:03:00.1]-28d9:4: Async-gnlist WWPN 21:fc:00:05:1e:02:da:3e [ 12.387045] qla2xxx [0001:03:00.1]-28da:4: Async-gnlist - OUT WWPN 21:fc:00:05:1e:02:da:3e hndl c [ 12.387046] qla2xxx [0001:03:00.1]-107ff:4: qla24xx_create_new_sess 4743 21:fc:00:05:1e:02:da:3e enter [ 12.387047] qla2xxx [0001:03:00.1]-28d9:4: Async-gnlist WWPN 21:fc:00:05:1e:02:da:3e [ 12.387048] qla2xxx [0001:03:00.1]-107ff:4: qla24xx_create_new_sess 4743 21:fc:00:05:1e:02:da:3e enter [ 12.387049] qla2xxx [0001:03:00.1]-28d9:4: Async-gnlist WWPN 21:fc:00:05:1e:02:da:3e [ 12.387050] qla2xxx [0001:03:00.1]-107ff:4: qla24xx_async_gnnft_done enter [ 12.387055] qla2xxx [0001:03:00.1]-28d8:4: qla24xx_fcport_handle_login 21:00:00:24:ff:91:27:de DS 3 LS 3 P 0 fl 1 confl (null) rscn 0|0 login 0|0 retry 5 lid 4096 scan 2 [ 12.387057] qla2xxx [0001:03:00.1]-28d8:4: qla24xx_fcport_handle_login 50:05:07:68:02:16:5e:37 DS 3 LS 3 P 0 fl 1 confl (null) rscn 0|0 login 0|0 retry 5 lid 4096 scan 2 [ 12.387059] qla2xxx [0001:03:00.1]-28d8:4: qla24xx_fcport_handle_login 50:05:07:68:02:16:5e:38 DS 3 LS 3 P 0 fl 1 confl (null) rscn 0|0 login 0|0 retry 5 lid 4096 scan 2 [ 12.387061] qla2xxx [0001:03:00.1]-107ff:4: qla24xx_create_new_sess 4743 21:fc:00:05:1e:02:da:3e enter [ 12.387062] qla2xxx [0001:03:00.1]-28d9:4: Async-gnlist WWPN 21:fc:00:05:1e:02:da:3e [ 12.387063] qla2xxx [0001:03:00.1]-28d9:4: Async-gnlist WWPN 21:fa:00:05:1e:02:da:3e [ 12.387065] qla2xxx [0001:03:00.1]-28da:4: Async-gnlist - OUT WWPN 21:fa:00:05:1e:02:da:3e hndl d [ 12.387065] qla2xxx [0001:03:00.1]-28d9:4: Async-gnlist WWPN 20:03:00:05:1e:02:da:3e [ 12.387067] qla2xxx [0001:03:00.1]-28da:4: Async-gnlist - OUT WWPN 20:03:00:05:1e:02:da:3e hndl e [ 12.387068] qla2xxx [0001:03:00.1]-4800:4: DPC handler sleeping. [ 12.389335] qla2xxx [0001:03:00.1]-28e7:4: Async done-gnlist res 0 mb[1]=78 mb[2]=be6a [ 12.389337] qla2xxx [0001:03:00.1]-28e1:4: qla24xx_handle_gnl_done_event 469 21:fc:00:05:1e:02:da:3e n 3 fcffff lid 4096 [ 12.389339] qla2xxx [0001:03:00.1]-28e2:4: qla24xx_handle_gnl_done_event found 21:fc:00:05:1e:02:da:3e CLS [4|7] ID[fffffc|fcffff] lid[2044|4096] [ 12.389339] qla2xxx [0001:03:00.1]-28e3:4: qla24xx_handle_gnl_done_event 502 21:fc:00:05:1e:02:da:3e post del sess [ 12.389342] qla2xxx [0001:03:00.1]-28e1:4: qla24xx_handle_gnl_done_event 469 21:fa:00:05:1e:02:da:3e n 3 faffff lid 4096 [ 12.389343] qla2xxx [0001:03:00.1]-28e2:4: qla24xx_handle_gnl_done_event found 21:fa:00:05:1e:02:da:3e CLS [4|7] ID[fffffa|faffff] lid[10|4096] [ 12.389344] qla2xxx [0001:03:00.1]-28e3:4: qla24xx_handle_gnl_done_event 502 21:fa:00:05:1e:02:da:3e post del sess [ 12.389346] qla2xxx [0001:03:00.1]-28e1:4: qla24xx_handle_gnl_done_event 469 20:03:00:05:1e:02:da:3e n 3 feffff lid 4096 [ 12.389348] qla2xxx [0001:03:00.1]-28e2:4: qla24xx_handle_gnl_done_event found 20:03:00:05:1e:02:da:3e CLS [4|7] ID[fffffe|feffff] lid[2046|4096] [ 12.389348] qla2xxx [0001:03:00.1]-28e3:4: qla24xx_handle_gnl_done_event 502 20:03:00:05:1e:02:da:3e post del sess [ 12.389353] qla2xxx [0001:03:00.1]-290a:4: qlt_unreg_sess sess 000000002760e0cd for deletion 21:fc:00:05:1e:02:da:3e [ 12.389355] qla2xxx [0001:03:00.1]-290a:4: qlt_unreg_sess sess 00000000219afae7 for deletion 21:fa:00:05:1e:02:da:3e [ 12.389356] qla2xxx [0001:03:00.1]-290a:4: qlt_unreg_sess sess 000000006626430f for deletion 20:03:00:05:1e:02:da:3e [ 12.389362] qla2xxx [0001:03:00.1]-4800:4: DPC handler sleeping. [ 12.390483] qla2xxx [0001:03:00.1]-28e7:4: Async done-gnlist res 0 mb[1]=78 mb[2]=be6a [ 12.390484] qla2xxx [0001:03:00.1]-28e7:4: Async done-gnlist res 0 mb[1]=78 mb[2]=be6a [ 13.054133] qla2xxx [0001:03:00.1]-4800:4: DPC handler sleeping. [ 13.233199] ip_tables: (C) 2000-2006 Netfilter Core Team [ 13.252625] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 13.253427] systemd[1]: Detected architecture ppc64-le. Welcome to Ubuntu 18.04 LTS! [ 13.279522] systemd[1]: Set hostname to . [ 14.078134] qla2xxx [0001:03:00.1]-480d:4: Relogin scheduled. [ 14.078177] qla2xxx [0001:03:00.1]-2908:4: qla2x00_relogin 21:00:00:24:ff:91:27:de DS 3 LS 3 [ 14.078222] qla2xxx [0001:03:00.1]-2902:4: qla24xx_handle_relogin_event 21:00:00:24:ff:91:27:de DS 3 LS 3 P 0 del 2 cnfl (null) rscn 0|0 login 0|0 fl 1 [ 14.078287] qla2xxx [0001:03:00.1]-2908:4: qla2x00_relogin 50:05:07:68:02:16:5e:37 DS 3 LS 3 [ 14.078344] qla2xxx [0001:03:00.1]-2902:4: qla24xx_handle_relogin_event 50:05:07:68:02:16:5e:37 DS 3 LS 3 P 0 del 2 cnfl (null) rscn 0|0 login 0|0 fl 1 [ 14.078408] qla2xxx [0001:03:00.1]-2908:4: qla2x00_relogin 50:05:07:68:02:16:5e:38 DS 3 LS 3 [ 14.078451] qla2xxx [0001:03:00.1]-2902:4: qla24xx_handle_relogin_event 50:05:07:68:02:16:5e:38 DS 3 LS 3 P 0 del 2 cnfl (null) rscn 0|0 login 0|0 fl 1 [ 14.078515] qla2xxx [0001:03:00.1]-2908:4: qla2x00_relogin 21:fa:00:05:1e:02:da:3e DS 0 LS 7 [ 14.078557] qla2xxx [0001:03:00.1]-2908:4: qla2x00_relogin 20:03:00:05:1e:02:da:3e DS 0 LS 7 [ 14.078598] qla2xxx [0001:03:00.1]-2908:4: qla2x00_relogin 21:fc:00:05:1e:02:da:3e DS 0 LS 7 [ 14.078640] qla2xxx [0001:03:00.1]-2902:4: qla24xx_handle_relogin_event 21:fc:00:05:1e:02:da:3e DS 0 LS 7 P 0 del 2 cnfl (null) rscn 0|0 login 0|0 fl 1 [ 14.078705] qla2xxx [0001:03:00.1]-28d8:4: qla24xx_fcport_handle_login 21:fc:00:05:1e:02:da:3e DS 0 LS 7 P 0 fl 1 confl (null) rscn 0|0 login 0|0 retry 30 lid 4096 scan 2 [ 14.078776] qla2xxx [0001:03:00.1]-28bd:4: qla24xx_fcport_handle_login 1180 21:fc:00:05:1e:02:da:3e post gnl [ 14.078823] qla2xxx [0001:03:00.1]-480e:4: Relogin end. [ 14.078847] qla2xxx [0001:03:00.1]-4800:4: DPC handler sleeping. [ 14.587638] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 14.588639] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 14.589314] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 14.589520] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ OK ] Listening on Device-mapper event daemon FIFOs. [ 14.589759] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 14.589948] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 14.590148] systemd[1]: Listening on LVM2 poll daemon socket. [ OK ] Listening on LVM2 poll daemon socket. [ OK ] Reached target Slices. [ OK ] Listening on Syslog Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ OK ] Listening on Journal Socket. Mounting POSIX Message Queue File System... Mounting Huge Pages File System... [ OK ] Listening on udev Control Socket. Starting Set the console keyboard layout... Starting Create list of required st…ce nodes for the current kernel... Starting udev Coldplug all Devices... Starting Remount Root and Kernel File Systems... [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point. [ OK ] Listening on LVM2 metadata daemon socket. Starting Monitoring of LVM2 mirrors…ng dmeventd or progress polling... [ OK ] Reached target User and Group Name Lookups. [ OK ] Created slice system-serial\x2dgetty.slice. Starting Load Kernel Modules... Starting Uncomplicated firewall... [ OK ] Listening on Journal Audit Socket. Starting Journal Service... [ OK ] Started Read required files in advance. Mounting Kernel Debug File System... [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Started Create list of required sta…vice nodes for the current kernel. Starting Create Static Device Nodes in /dev... [ OK ] Started Uncomplicated firewall. [ 14.947162] synth uevent: /devices/vio: failed to send uevent [ 14.947167] vio vio: uevent: failed to send synthetic uevent [ OK ] Started udev Coldplug all Devices. Starting udev Wait for Complete Device Initialization... [ 15.102134] qla2xxx [0001:03:00.1]-28d9:4: Async-gnlist WWPN 21:fc:00:05:1e:02:da:3e [ 15.102182] qla2xxx [0001:03:00.1]-28da:4: Async-gnlist - OUT WWPN 21:fc:00:05:1e:02:da:3e hndl f [ 15.102226] qla2xxx [0001:03:00.1]-4800:4: DPC handler sleeping. [ 15.103336] qla2xxx [0001:03:00.1]-28e7:4: Async done-gnlist res 0 mb[1]=78 mb[2]=be6a [ 15.103381] qla2xxx [0001:03:00.1]-28e1:4: qla24xx_handle_gnl_done_event 469 21:fc:00:05:1e:02:da:3e n 3 fcffff lid 4096 [ 15.103431] qla2xxx [0001:03:00.1]-28e2:4: qla24xx_handle_gnl_done_event found 21:fc:00:05:1e:02:da:3e CLS [4|7] ID[fffffc|fcffff] lid[2044|4096] [ 15.103490] qla2xxx [0001:03:00.1]-28e3:4: qla24xx_handle_gnl_done_event 502 21:fc:00:05:1e:02:da:3e post del sess [ 15.103547] qla2xxx [0001:03:00.1]-290a:4: qlt_unreg_sess sess 000000002760e0cd for deletion 21:fc:00:05:1e:02:da:3e [ 15.103603] qla2xxx [0001:03:00.1]-480d:4: Relogin scheduled. [ 15.103651] qla2xxx [0001:03:00.1]-2908:4: qla2x00_relogin 21:00:00:24:ff:91:27:de DS 3 LS 3 [ 15.103695] qla2xxx [0001:03:00.1]-2902:4: qla24xx_handle_relogin_event 21:00:00:24:ff:91:27:de DS 3 LS 3 P 0 del 2 cnfl (null) rscn 0|0 login 0|0 fl 1 [ 15.103760] qla2xxx [0001:03:00.1]-2908:4: qla2x00_relogin 50:05:07:68:02:16:5e:37 DS 3 LS 3 [ 15.103803] qla2xxx [0001:03:00.1]-2902:4: qla24xx_handle_relogin_event 50:05:07:68:02:16:5e:37 DS 3 LS 3 P 0 del 2 cnfl (null) rscn 0|0 login 0|0 fl 1 [ 15.103868] qla2xxx [0001:03:00.1]-2908:4: qla2x00_relogin 50:05:07:68:02:16:5e:38 DS 3 LS 3 [ 15.103910] qla2xxx [0001:03:00.1]-2902:4: qla24xx_handle_relogin_event 50:05:07:68:02:16:5e:38 DS 3 LS 3 P 0 del 2 cnfl (null) rscn 0|0 login 0|0 fl 1 [ 15.103974] qla2xxx [0001:03:00.1]-2908:4: qla2x00_relogin 21:fa:00:05:1e:02:da:3e DS 0 LS 7 [ 15.104016] qla2xxx [0001:03:00.1]-2908:4: qla2x00_relogin 20:03:00:05:1e:02:da:3e DS 0 LS 7 [ 15.104057] qla2xxx [0001:03:00.1]-2908:4: qla2x00_relogin 21:fc:00:05:1e:02:da:3e DS 0 LS 7 [ 15.104099] qla2xxx [0001:03:00.1]-2902:4: qla24xx_handle_relogin_event 21:fc:00:05:1e:02:da:3e DS 0 LS 7 P 0 del 2 cnfl (null) rscn 0|0 login 0|0 fl 1 [ 15.104165] qla2xxx [0001:03:00.1]-28d8:4: qla24xx_fcport_handle_login 21:fc:00:05:1e:02:da:3e DS 0 LS 7 P 0 fl 1 confl (null) rscn 0|0 login 0|0 retry 30 lid 4096 scan 2 [ 15.104235] qla2xxx [0001:03:00.1]-28bd:4: qla24xx_fcport_handle_login 1180 21:fc:00:05:1e:02:da:3e post gnl [ 15.104283] qla2xxx [0001:03:00.1]-480e:4: Relogin end. [ 15.104307] qla2xxx [0001:03:00.1]-4800:4: DPC handler sleeping. [ 15.150713] Loading iSCSI transport class v2.0-870. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted Kernel Debug File System. [ 15.332759] iscsi: registered transport (tcp) [ OK ] Started Journal Service. [ OK ] Started Create Static Device Nodes in /dev. [ 15.617500] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ OK ] Started Remount Root and Kernel File Systems. Activating swap /swapfile... Starting Load/Save Random Seed... Starting udev Kernel Device Manager... Starting Flush Journal to Persistent Storage... [ 15.718734] iscsi: registered transport (iser) [ OK ] Started Load Kernel Modules. Mounting Kernel Configuration File System... Starting Apply Kernel Variables... Mounting FUSE Control File System... [ OK ] Mounted Kernel Configuration File System. [ OK ] Mounted FUSE Control File System. [ OK ] Started Load/Save Random Seed. [ 15.761554] Adding 2097088k swap on /swapfile. Priority:-2 extents:6 across:2260928k FS [ OK ] Activated swap /swapfile. [ OK ] Reached target Swap. [ 15.819590] systemd-journald[1575]: Received request to flush runtime journal from PID 1 [ OK ] Started Apply Kernel Variables. [ OK ] Started udev Kernel Device Manager. [ OK ] Found device /dev/hvc0. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Started Set the console keyboard layout. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Local Encrypted Volumes. [ OK ] Created slice system-lvm2\x2dpvscan.slice. [ OK ] Started udev Wait for Complete Device Initialization. Starting Device-Mapper Multipath Device Controller... [ OK ] Started Device-Mapper Multipath Device Controller. [ OK ] Started LVM2 metadata daemon. Starting LVM2 PV scan on device 8:19... [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Monitoring of LVM2 mirrors,…sing dmeventd or progress polling. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... Starting AppArmor initialization... Starting Tell Plymouth To Write Out Runtime Data... Starting Set console font and keymap... Starting ebtables ruleset management... [ OK ] Started Tell Plymouth To Write Out Runtime Data. [ OK ] Started Set console font and keymap. [ OK ] Started Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started LVM2 PV scan on device 8:19. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started ebtables ruleset management. [ OK ] Reached target Network (Pre). Starting Network Service... [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ OK ] Started Network Service. Starting Wait for Network to be Configured... Starting Network Name Resolution... [ OK ] Started Network Name Resolution. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Reached target Network. [ OK ] Started AppArmor initialization. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Started Daily apt download activities. Starting LXD - unix socket. [ OK ] Started Message of the Day. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on ACPID Listen Socket. [ OK ] Started ACPI Events Check. [ OK ] Reached target Paths. [ OK ] Listening on UUID daemon activation socket. [ OK ] Started Daily apt upgrade and clean activities. Starting Socket activation for snappy daemon. [ OK ] Started Discard unused blocks once a week. [ OK ] Reached target Timers. [ OK ] Listening on LXD - unix socket. [ OK ] Listening on Socket activation for snappy daemon. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Dispatcher daemon for systemd-networkd... [ OK ] Started Unattended Upgrades Shutdown. Starting LXD - container startup/shutdown... [ OK ] Started D-Bus System Message Bus. [ OK ] Started Regular background program processing daemon. Starting Snappy daemon... Starting IBM Power Raid dump daemon... [ OK ] Started FUSE filesystem for LXC. Starting Login Service... [ OK ] Started Set the CPU Frequency Scaling governor. [ OK ] Started OPAL PRD daemon. Starting System Logging Service... [ OK ] Started Deferred execution scheduler. Starting Accounts Service... [ OK ] Started irqbalance daemon. [ OK ] Started Wait for Network to be Configured. [ OK ] Reached target Network is Online. Starting iSCSI initiator daemon (iscsid)... Starting OpenBSD Secure Shell server... [ OK ] Started IBM Power Raid dump daemon. [ OK ] Started Login Service. Starting IBM Power Raid update daemon... Starting IBM Power Raid init daemon... [ OK ] Started IBM Power Raid update daemon. [ OK ] Started IBM Power Raid init daemon. [ OK ] Reached target IBM Power Raid utilities. [ OK ] Started System Logging Service. [ OK ] Started iSCSI initiator daemon (iscsid). [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. Starting LSB: automatic crash report generation... Starting Permit User Sessions... Starting Availability of block devices... [ OK ] Started Permit User Sessions. [ OK ] Started Availability of block devices. Starting Hold until boot process finishes up... Starting Terminate Plymouth Boot Screen... Starting Authorization Manager... [ OK ] Started Hold until boot process finishes up. Starting Set console scheme... [ OK ] Started Serial Getty on hvc0. [ OK ] Started Terminate Plymouth Boot Screen. [ OK ] Started Set console scheme. [ OK ] Created slice system-getty.slice. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ OK ] Started Authorization Manager. [ OK ] Started Accounts Service. [ OK ] Started LXD - container startup/shutdown. [ OK ] Started LSB: automatic crash report generation. [ OK ] Started Snappy daemon. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started Dispatcher daemon for systemd-networkd. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. [ OK ] Started Stop ureadahead data collection 45s after completed startup. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. Ubuntu 18.04 LTS ltc-boston113 hvc0 ltc-boston113 login: root Password: Last login: Fri May 11 08:31:00 CDT 2018 on hvc0 Welcome to Ubuntu 18.04 LTS (GNU/Linux 4.15.0-21-generic ppc64le) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage System information as of Fri May 11 08:38:58 CDT 2018 System load: 11.63 Processes: 1143 Usage of /: 0.2% of 1.79TB Users logged in: 0 Memory usage: 1% IP address for enP1p9s0f0: 9.40.193.115 Swap usage: 0% * Meltdown, Spectre and Ubuntu: What are the attack vectors, how the fixes work, and everything else you need to know - https://ubu.one/u2Know 0 packages can be updated. 0 updates are security updates. root@ltc-boston113:~# lsscsi [0:2:0:0] disk SEAGATE ST2000NM0045 N003 /dev/sda [0:2:1:0] disk SEAGATE ST2000NM0045 N003 /dev/sdb [0:2:10:0] disk SEAGATE ST4000NM0075 KT02 /dev/sdc [0:2:11:0] disk SEAGATE ST4000NM0075 KT02 /dev/sdd [0:3:123:0] enclosu ADAPTEC Smart Adapter 4.00 - root@ltc-boston113:~#