[ 0.000000] microcode: microcode updated early to revision 0x2d, date = 2018-02-07 [ 0.000000] Linux version 4.15.0-13-generic (buildd@lgw01-amd64-023) (gcc version 7.3.0 (Ubuntu 7.3.0-11ubuntu1)) #14-Ubuntu SMP Sat Mar 17 13:44:27 UTC 2018 (Ubuntu 4.15.0-13.14-generic 4.15.10) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-13-generic.efi.signed root=UUID=d4f27b9e-0cff-49e1-8392-a41aa520bd85 ro noprompt persistent quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000e7369fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e736a000-0x00000000e73b2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000e73b3000-0x00000000e73bafff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000e73bb000-0x00000000e760bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e760c000-0x00000000e760cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e760d000-0x00000000e760dfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e760e000-0x00000000e760efff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000e760f000-0x00000000e760ffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000e7610000-0x00000000e7619fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000e761a000-0x00000000e761dfff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000e761e000-0x00000000e762ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e7630000-0x00000000e763dfff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000e763e000-0x00000000e7640fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e7641000-0x00000000e7683fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000e7684000-0x00000000e77fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004177fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.00 by American Megatrends [ 0.000000] efi: SMBIOS=0xe763fc18 ACPI=0xe73b3000 ACPI 2.0=0xe73b3000 MPS=0xfcbd0 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./HM65-MXM, BIOS P1.10 09/16/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x417800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask C00000000 write-back [ 0.000000] 1 base 400000000 mask FE0000000 write-back [ 0.000000] 2 base 0E8000000 mask FF8000000 uncachable [ 0.000000] 3 base 0F0000000 mask FF0000000 uncachable [ 0.000000] 4 base 417800000 mask FFF800000 uncachable [ 0.000000] 5 base 418000000 mask FF8000000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 16376M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 512M num_reg: 8 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xe8000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xe7800 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fceb0-0x000fcebf] mapped at [ (ptrval)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576 [ 0.000000] BRK [0x2a773e000, 0x2a773efff] PGTABLE [ 0.000000] BRK [0x2a773f000, 0x2a773ffff] PGTABLE [ 0.000000] BRK [0x2a7740000, 0x2a7740fff] PGTABLE [ 0.000000] BRK [0x2a7741000, 0x2a7741fff] PGTABLE [ 0.000000] BRK [0x2a7742000, 0x2a7742fff] PGTABLE [ 0.000000] BRK [0x2a7743000, 0x2a7743fff] PGTABLE [ 0.000000] BRK [0x2a7744000, 0x2a7744fff] PGTABLE [ 0.000000] BRK [0x2a7745000, 0x2a7745fff] PGTABLE [ 0.000000] BRK [0x2a7746000, 0x2a7746fff] PGTABLE [ 0.000000] BRK [0x2a7747000, 0x2a7747fff] PGTABLE [ 0.000000] BRK [0x2a7748000, 0x2a7748fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3086b000-0x3442cfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000E73B3000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000E73B3068 000054 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000E73BA7F8 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000E73B3150 0076A2 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000E7611F80 000040 [ 0.000000] ACPI: APIC 0x00000000E73BA8F0 000072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000E73BA968 000102 (v01 AMICPU PROC 00000001 MSFT 03000001) [ 0.000000] ACPI: MCFG 0x00000000E73BAA70 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: AAFT 0x00000000E73BAAB0 0000BA (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000E73BAB70 000038 (v01 ALASKA A M I 01072009 AMI. 00000004) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000004177fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x4177ca000-0x4177f4fff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000004177fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000e7369fff] [ 0.000000] node 0: [mem 0x00000000e760c000-0x00000000e760cfff] [ 0.000000] node 0: [mem 0x00000000e7684000-0x00000000e77fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000004177fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000004177fffff] [ 0.000000] On node 0 totalpages: 4189318 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 28 pages reserved [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14740 pages used for memmap [ 0.000000] DMA32 zone: 943335 pages, LIFO batch:31 [ 0.000000] Normal zone: 50656 pages used for memmap [ 0.000000] Normal zone: 3241984 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 97 pages [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe736a000-0xe73b2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe73b3000-0xe73bafff] [ 0.000000] PM: Registered nosave memory: [mem 0xe73bb000-0xe760bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xe760d000-0xe760dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xe760e000-0xe760efff] [ 0.000000] PM: Registered nosave memory: [mem 0xe760f000-0xe760ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe7610000-0xe7619fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe761a000-0xe761dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xe761e000-0xe762ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe7630000-0xe763dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xe763e000-0xe7640fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe7641000-0xe7683fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe7800000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xe7800000-0xfed1bfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4123830 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-13-generic.efi.signed root=UUID=d4f27b9e-0cff-49e1-8392-a41aa520bd85 ro noprompt persistent quiet splash vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16314960K/16757272K available (12300K kernel code, 2473K rwdata, 4224K rodata, 2404K init, 2416K bss, 442312K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39197 entries in 154 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 2494.239 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.47 BogoMIPS (lpj=9976956) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.032515] Security Framework initialized [ 0.032516] Yama: becoming mindful. [ 0.032530] AppArmor: AppArmor initialized [ 0.034787] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.035927] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.035982] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.036023] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.036225] CPU: Physical Processor ID: 0 [ 0.036225] CPU: Processor Core ID: 0 [ 0.036231] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.036231] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.036235] mce: CPU supports 7 MCE banks [ 0.036243] CPU0: Thermal monitoring enabled (TM1) [ 0.036251] process: using mwait in idle threads [ 0.036253] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.036254] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.036255] Spectre V2 : Mitigation: Full generic retpoline [ 0.036256] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.036257] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.036373] Freeing SMP alternatives memory: 36K [ 0.040714] TSC deadline timer enabled [ 0.040717] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.040787] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.040809] ... version: 3 [ 0.040810] ... bit width: 48 [ 0.040810] ... generic registers: 4 [ 0.040811] ... value mask: 0000ffffffffffff [ 0.040812] ... max period: 00007fffffffffff [ 0.040812] ... fixed-purpose events: 3 [ 0.040813] ... event mask: 000000070000000f [ 0.040848] Hierarchical SRCU implementation. [ 0.041735] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.041751] smp: Bringing up secondary CPUs ... [ 0.041828] x86: Booting SMP configuration: [ 0.041829] .... node #0, CPUs: #1 #2 #3 [ 0.048058] smp: Brought up 1 node, 4 CPUs [ 0.048058] smpboot: Max logical packages: 1 [ 0.048058] smpboot: Total of 4 processors activated (19953.91 BogoMIPS) [ 0.051011] devtmpfs: initialized [ 0.051011] x86/mm: Memory block size: 128MB [ 0.053074] evm: security.selinux [ 0.053075] evm: security.SMACK64 [ 0.053076] evm: security.SMACK64EXEC [ 0.053076] evm: security.SMACK64TRANSMUTE [ 0.053077] evm: security.SMACK64MMAP [ 0.053077] evm: security.apparmor [ 0.053078] evm: security.ima [ 0.053078] evm: security.capability [ 0.053094] PM: Registering ACPI NVS region [mem 0xe736a000-0xe73b2fff] (299008 bytes) [ 0.053094] PM: Registering ACPI NVS region [mem 0xe7610000-0xe7619fff] (40960 bytes) [ 0.053094] PM: Registering ACPI NVS region [mem 0xe7641000-0xe7683fff] (274432 bytes) [ 0.053094] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.053094] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.053094] pinctrl core: initialized pinctrl subsystem [ 0.053094] RTC time: 17:50:45, date: 03/28/18 [ 0.053094] NET: Registered protocol family 16 [ 0.053094] audit: initializing netlink subsys (disabled) [ 0.053094] audit: type=2000 audit(1522259445.052:1): state=initialized audit_enabled=0 res=1 [ 0.053094] cpuidle: using governor ladder [ 0.053094] cpuidle: using governor menu [ 0.053094] ACPI: bus type PCI registered [ 0.053094] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.053094] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.053094] PCI: not using MMCONFIG [ 0.053094] PCI: Using configuration type 1 for base access [ 0.053094] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.053391] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.053391] ACPI: Added _OSI(Module Device) [ 0.053391] ACPI: Added _OSI(Processor Device) [ 0.053391] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.053391] ACPI: Added _OSI(Processor Aggregator Device) [ 0.053391] ACPI: Executed 1 blocks of module-level executable AML code [ 0.060003] ACPI: Dynamic OEM Table Load: [ 0.060003] ACPI: SSDT 0xFFFF889A449AA000 00038C (v01 AMI IST 00000001 MSFT 03000001) [ 0.060003] ACPI: Dynamic OEM Table Load: [ 0.060003] ACPI: SSDT 0xFFFF889A44A29600 000084 (v01 AMI CST 00000001 MSFT 03000001) [ 0.060003] ACPI: Interpreter enabled [ 0.060003] ACPI: (supports S0 S1 S3 S4 S5) [ 0.060003] ACPI: Using IOAPIC for interrupt routing [ 0.060003] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.060003] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.060003] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.060003] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.060003] ACPI: GPE 0x1B active on init [ 0.060004] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.060298] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.066147] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.066153] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.066385] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug] [ 0.066603] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] [ 0.066614] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.067006] PCI host bridge to bus 0000:00 [ 0.067008] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.067010] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.067011] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.067013] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.067014] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.067016] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.067017] pci_bus 0000:00: root bus resource [mem 0xe8000000-0xf7ffffff window] [ 0.067019] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.067027] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.067133] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.067169] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.067302] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.067341] pci 0000:00:16.0: reg 0x10: [mem 0xf7408000-0xf740800f 64bit] [ 0.067453] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.067557] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.067590] pci 0000:00:1a.0: reg 0x10: [mem 0xf7407000-0xf74073ff] [ 0.067718] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.067817] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.067851] pci 0000:00:1b.0: reg 0x10: [mem 0xf7400000-0xf7403fff 64bit] [ 0.067964] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.068063] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.068199] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.068302] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.068435] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.068537] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 0.068672] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.068774] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.068907] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.069007] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.069142] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.069248] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.069281] pci 0000:00:1d.0: reg 0x10: [mem 0xf7406000-0xf74063ff] [ 0.069410] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.069504] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.069737] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.069772] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.069783] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.069796] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.069809] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.069823] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.069836] pci 0000:00:1f.2: reg 0x24: [mem 0xf7405000-0xf74057ff] [ 0.069913] pci 0000:00:1f.2: PME# supported from D3hot [ 0.070002] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.070033] pci 0000:00:1f.3: reg 0x10: [mem 0xf7404000-0xf74040ff 64bit] [ 0.070070] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.070228] pci 0000:01:00.0: [10de:0df4] type 00 class 0x030000 [ 0.070244] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] [ 0.070253] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref] [ 0.070262] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.070269] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.070275] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref] [ 0.070280] pci 0000:01:00.0: enabling Extended Tags [ 0.070290] pci 0000:01:00.0: BAR 3: assigned to efifb [ 0.070435] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300 [ 0.070449] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff] [ 0.070483] pci 0000:01:00.1: enabling Extended Tags [ 0.084038] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.084046] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.084053] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.084061] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.084152] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.084249] pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.084301] pci 0000:03:00.0: reg 0x10: [mem 0xf7300000-0xf7301fff 64bit] [ 0.084494] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.100046] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.100060] pci 0000:00:1c.1: bridge window [mem 0xf7300000-0xf73fffff] [ 0.100176] pci 0000:04:00.0: [168c:002e] type 00 class 0x028000 [ 0.100226] pci 0000:04:00.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit] [ 0.100399] pci 0000:04:00.0: supports D1 [ 0.100400] pci 0000:04:00.0: PME# supported from D0 D1 D3hot [ 0.116045] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.116059] pci 0000:00:1c.2: bridge window [mem 0xf7200000-0xf72fffff] [ 0.116178] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 0.116221] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.116263] pci 0000:05:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref] [ 0.116290] pci 0000:05:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref] [ 0.116435] pci 0000:05:00.0: supports D1 D2 [ 0.116436] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.132045] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.132055] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.132073] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref] [ 0.132182] pci 0000:06:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.132232] pci 0000:06:00.0: reg 0x10: [mem 0xf7100000-0xf7101fff 64bit] [ 0.132424] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.148044] pci 0000:00:1c.4: PCI bridge to [bus 06] [ 0.148058] pci 0000:00:1c.4: bridge window [mem 0xf7100000-0xf71fffff] [ 0.148712] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.148787] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.148860] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.148933] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.149006] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.149079] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.149152] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.149225] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.152005] SCSI subsystem initialized [ 0.152018] libata version 3.00 loaded. [ 0.152025] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.152025] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.152025] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.152025] vgaarb: loaded [ 0.152031] ACPI: bus type USB registered [ 0.152045] usbcore: registered new interface driver usbfs [ 0.152051] usbcore: registered new interface driver hub [ 0.152069] usbcore: registered new device driver usb [ 0.152102] EDAC MC: Ver: 3.0.0 [ 0.152117] Registered efivars operations [ 0.184272] PCI: Using ACPI for IRQ routing [ 0.187055] PCI: pci_cache_line_size set to 64 bytes [ 0.187128] e820: reserve RAM buffer [mem 0xe736a000-0xe7ffffff] [ 0.187130] e820: reserve RAM buffer [mem 0xe760d000-0xe7ffffff] [ 0.187132] e820: reserve RAM buffer [mem 0xe7800000-0xe7ffffff] [ 0.187133] e820: reserve RAM buffer [mem 0x417800000-0x417ffffff] [ 0.187224] NetLabel: Initializing [ 0.187225] NetLabel: domain hash size = 128 [ 0.187225] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.187241] NetLabel: unlabeled traffic allowed by default [ 0.187256] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.187256] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.188003] clocksource: Switched to clocksource hpet [ 0.198778] VFS: Disk quotas dquot_6.6.0 [ 0.198795] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.198891] AppArmor: AppArmor Filesystem Enabled [ 0.198917] pnp: PnP ACPI init [ 0.199108] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved [ 0.199110] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.199112] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.199113] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.199115] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.199121] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.199229] system 00:01: [io 0x0290-0x02cf] has been reserved [ 0.199234] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.199412] pnp 00:02: Plug and Play ACPI device, IDs NTN0530 (active) [ 0.199440] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.199502] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.199506] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.199802] system 00:05: [io 0x0400-0x0453] has been reserved [ 0.199804] system 00:05: [io 0x0458-0x047f] has been reserved [ 0.199806] system 00:05: [io 0x1180-0x119f] has been reserved [ 0.199807] system 00:05: [io 0x0500-0x057f] has been reserved [ 0.199809] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.199811] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved [ 0.199813] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.199815] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.199819] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.199895] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.199900] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.200188] pnp: PnP ACPI: found 7 devices [ 0.206674] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.206740] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.206743] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.206746] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.206748] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.206752] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.206768] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.206775] pci 0000:00:1c.1: bridge window [mem 0xf7300000-0xf73fffff] [ 0.206786] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.206793] pci 0000:00:1c.2: bridge window [mem 0xf7200000-0xf72fffff] [ 0.206805] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.206808] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.206818] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref] [ 0.206826] pci 0000:00:1c.4: PCI bridge to [bus 06] [ 0.206833] pci 0000:00:1c.4: bridge window [mem 0xf7100000-0xf71fffff] [ 0.206845] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.206847] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.206848] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.206850] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.206851] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.206853] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.206854] pci_bus 0000:00: resource 10 [mem 0xe8000000-0xf7ffffff window] [ 0.206856] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.206857] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff] [ 0.206859] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.206860] pci_bus 0000:03: resource 1 [mem 0xf7300000-0xf73fffff] [ 0.206862] pci_bus 0000:04: resource 1 [mem 0xf7200000-0xf72fffff] [ 0.206864] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 0.206865] pci_bus 0000:05: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref] [ 0.206867] pci_bus 0000:06: resource 1 [mem 0xf7100000-0xf71fffff] [ 0.206958] NET: Registered protocol family 2 [ 0.207162] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.207377] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.207499] TCP: Hash tables configured (established 131072 bind 65536) [ 0.207545] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.207596] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.207677] NET: Registered protocol family 1 [ 2.204035] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 4.204035] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 4.204232] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 4.204547] PCI: CLS 64 bytes, default 64 [ 4.204591] Unpacking initramfs... [ 5.117225] Freeing initrd memory: 61192K [ 5.117258] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 5.117262] software IO TLB [mem 0xe336a000-0xe736a000] (64MB) mapped at [000000004393d817-000000008edf273e] [ 5.117510] Scanning for low memory corruption every 60 seconds [ 5.118128] Initialise system trusted keyrings [ 5.118137] Key type blacklist registered [ 5.118175] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 5.119252] zbud: loaded [ 5.119711] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 5.119837] fuse init (API version 7.26) [ 5.121268] Key type asymmetric registered [ 5.121269] Asymmetric key parser 'x509' registered [ 5.121303] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 5.121336] io scheduler noop registered [ 5.121337] io scheduler deadline registered [ 5.121378] io scheduler cfq registered (default) [ 5.122420] pcieport 0000:00:01.0: Signaling PME with IRQ 24 [ 5.122455] pcieport 0000:00:1c.0: Signaling PME with IRQ 25 [ 5.122482] pcieport 0000:00:1c.1: Signaling PME with IRQ 26 [ 5.122509] pcieport 0000:00:1c.2: Signaling PME with IRQ 27 [ 5.122535] pcieport 0000:00:1c.3: Signaling PME with IRQ 28 [ 5.122562] pcieport 0000:00:1c.4: Signaling PME with IRQ 29 [ 5.122628] efifb: probing for efifb [ 5.122643] efifb: framebuffer at 0xf1000000, using 3072k, total 3072k [ 5.122644] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 5.122644] efifb: scrolling: redraw [ 5.122646] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 5.122746] Console: switching to colour frame buffer device 128x48 [ 5.122762] fb0: EFI VGA frame buffer device [ 5.122770] intel_idle: MWAIT substates: 0x21120 [ 5.122771] intel_idle: v0.4.1 model 0x2A [ 5.122912] intel_idle: lapic_timer_reliable_states 0xffffffff [ 5.122985] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 5.122996] ACPI: Power Button [PWRB] [ 5.123029] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 5.123060] ACPI: Power Button [PWRF] [ 5.123779] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 5.125714] Linux agpgart interface v0.103 [ 5.127117] loop: module loaded [ 5.127360] libphy: Fixed MDIO Bus: probed [ 5.127361] tun: Universal TUN/TAP device driver, 1.6 [ 5.127426] PPP generic driver version 2.4.2 [ 5.127472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.127475] ehci-pci: EHCI PCI platform driver [ 5.127591] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.127597] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.127612] ehci-pci 0000:00:1a.0: debug port 2 [ 5.131522] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 5.131537] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7407000 [ 5.144072] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.144165] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.144167] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.144169] usb usb1: Product: EHCI Host Controller [ 5.144170] usb usb1: Manufacturer: Linux 4.15.0-13-generic ehci_hcd [ 5.144171] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.144351] hub 1-0:1.0: USB hub found [ 5.144359] hub 1-0:1.0: 2 ports detected [ 5.144568] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.144572] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.144586] ehci-pci 0000:00:1d.0: debug port 2 [ 5.148489] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 5.148499] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7406000 [ 5.164076] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.164164] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.164166] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.164167] usb usb2: Product: EHCI Host Controller [ 5.164169] usb usb2: Manufacturer: Linux 4.15.0-13-generic ehci_hcd [ 5.164170] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.164346] hub 2-0:1.0: USB hub found [ 5.164353] hub 2-0:1.0: 2 ports detected [ 5.164464] ehci-platform: EHCI generic platform driver [ 5.164472] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.164475] ohci-pci: OHCI PCI platform driver [ 5.164484] ohci-platform: OHCI generic platform driver [ 5.164490] uhci_hcd: USB Universal Host Controller Interface driver [ 5.164573] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 5.164578] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3 [ 5.164741] xhci_hcd 0000:03:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004 [ 5.164987] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.164989] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.164990] usb usb3: Product: xHCI Host Controller [ 5.164992] usb usb3: Manufacturer: Linux 4.15.0-13-generic xhci-hcd [ 5.164993] usb usb3: SerialNumber: 0000:03:00.0 [ 5.165157] hub 3-0:1.0: USB hub found [ 5.165167] hub 3-0:1.0: 2 ports detected [ 5.165262] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 5.165265] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 5.168166] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.168182] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 5.168184] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.168186] usb usb4: Product: xHCI Host Controller [ 5.168187] usb usb4: Manufacturer: Linux 4.15.0-13-generic xhci-hcd [ 5.168188] usb usb4: SerialNumber: 0000:03:00.0 [ 5.168353] hub 4-0:1.0: USB hub found [ 5.168364] hub 4-0:1.0: 2 ports detected [ 5.168525] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 5.168530] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5 [ 5.168690] xhci_hcd 0000:06:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004 [ 5.168928] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.168930] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.168932] usb usb5: Product: xHCI Host Controller [ 5.168933] usb usb5: Manufacturer: Linux 4.15.0-13-generic xhci-hcd [ 5.168934] usb usb5: SerialNumber: 0000:06:00.0 [ 5.169101] hub 5-0:1.0: USB hub found [ 5.169112] hub 5-0:1.0: 2 ports detected [ 5.169201] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 5.169204] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6 [ 5.172117] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.172136] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 5.172138] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.172139] usb usb6: Product: xHCI Host Controller [ 5.172140] usb usb6: Manufacturer: Linux 4.15.0-13-generic xhci-hcd [ 5.172142] usb usb6: SerialNumber: 0000:06:00.0 [ 5.172308] hub 6-0:1.0: USB hub found [ 5.172319] hub 6-0:1.0: 2 ports detected [ 5.172440] i8042: PNP: No PS/2 controller found. [ 5.172640] mousedev: PS/2 mouse device common for all mice [ 5.172870] rtc_cmos 00:03: RTC can wake from S4 [ 5.173027] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 5.173058] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 5.173065] i2c /dev entries driver [ 5.173118] device-mapper: uevent: version 1.0.3 [ 5.173189] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 5.173194] intel_pstate: Intel P-state driver initializing [ 5.173400] ledtrig-cpu: registered to indicate activity on CPUs [ 5.173402] EFI Variables Facility v0.08 2004-May-17 [ 5.204677] NET: Registered protocol family 10 [ 5.208544] Segment Routing with IPv6 [ 5.208565] NET: Registered protocol family 17 [ 5.208613] Key type dns_resolver registered [ 5.208857] RAS: Correctable Errors collector initialized. [ 5.208884] microcode: sig=0x206a7, pf=0x10, revision=0x2d [ 5.208947] microcode: Microcode Update Driver: v2.2. [ 5.208954] sched_clock: Marking stable (5208939743, 0)->(5207627182, 1312561) [ 5.209164] registered taskstats version 1 [ 5.209171] Loading compiled-in X.509 certificates [ 5.211429] Loaded X.509 cert 'Build time autogenerated kernel key: db5373f8f110b2f912cb35c385d05910a922395e' [ 5.223490] Couldn't get size: 0x800000000000000e [ 5.223493] MODSIGN: Couldn't get UEFI db list [ 5.237681] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring [ 5.243730] Couldn't get size: 0x800000000000000e [ 5.243732] MODSIGN: Couldn't get UEFI dbx list [ 5.243754] zswap: loaded using pool lzo/zbud [ 5.246898] Key type big_key registered [ 5.246902] Key type trusted registered [ 5.248401] Key type encrypted registered [ 5.248404] AppArmor: AppArmor sha1 policy hashing enabled [ 5.248407] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 5.248430] evm: HMAC attrs: 0x1 [ 5.248841] Magic number: 10:676:846 [ 5.248954] rtc_cmos 00:03: setting system clock to 2018-03-28 17:50:51 UTC (1522259451) [ 5.249004] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 5.249005] EDD information not available. [ 5.251722] Freeing unused kernel memory: 2404K [ 5.251723] Write protecting the kernel read-only data: 20480k [ 5.252186] Freeing unused kernel memory: 2008K [ 5.255604] Freeing unused kernel memory: 1920K [ 5.261554] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 5.261554] x86/mm: Checking user space page tables [ 5.267181] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 5.337462] ACPI: Video Device [XVS0] (multi-head: yes rom: no post: no) [ 5.337624] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input2 [ 5.346717] ipmi message handler version 39.2 [ 5.349152] ipmi device interface [ 5.351610] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 5.352733] ahci 0000:00:1f.2: version 3.0 [ 5.352900] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 5.353171] r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0x000000003c5f17bf, bc:5f:f4:2c:f6:c1, XID 0c200000 IRQ 40 [ 5.353174] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 5.363010] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl SATA mode [ 5.363013] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 5.385231] nvidia: loading out-of-tree module taints kernel. [ 5.385241] nvidia: module license 'NVIDIA' taints kernel. [ 5.385242] Disabling lock debugging due to kernel taint [ 5.387331] r8169 0000:05:00.0 enp5s0: renamed from eth0 [ 5.390578] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 5.396705] scsi host0: ahci [ 5.396829] scsi host1: ahci [ 5.396936] scsi host2: ahci [ 5.397038] scsi host3: ahci [ 5.397134] nvidia-nvlink: Nvlink Core is being initialized, major device number 242 [ 5.397149] scsi host4: ahci [ 5.397390] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 5.397462] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.42 Sat Mar 3 04:10:22 PST 2018 (using threaded interrupts) [ 5.397750] scsi host5: ahci [ 5.397810] ata1: SATA max UDMA/133 abar m2048@0xf7405000 port 0xf7405100 irq 41 [ 5.397815] ata2: SATA max UDMA/133 abar m2048@0xf7405000 port 0xf7405180 irq 41 [ 5.397818] ata3: SATA max UDMA/133 abar m2048@0xf7405000 port 0xf7405200 irq 41 [ 5.397821] ata4: SATA max UDMA/133 abar m2048@0xf7405000 port 0xf7405280 irq 41 [ 5.397822] ata5: DUMMY [ 5.397823] ata6: DUMMY [ 5.399214] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.42 Sat Mar 3 03:30:48 PST 2018 [ 5.399851] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 5.399853] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0 [ 5.480066] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.500080] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.636544] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 5.636551] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.636878] hub 1-1:1.0: USB hub found [ 5.636999] hub 1-1:1.0: 6 ports detected [ 5.656897] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 5.656899] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.657155] hub 2-1:1.0: USB hub found [ 5.657220] hub 2-1:1.0: 6 ports detected [ 5.711037] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.712623] ata1.00: supports DRM functions and may not be fully accessible [ 5.713125] ata1.00: NCQ Send/Recv Log not supported [ 5.713131] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT01B6Q, max UDMA/133 [ 5.713136] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 5.714560] ata1.00: supports DRM functions and may not be fully accessible [ 5.715028] ata1.00: NCQ Send/Recv Log not supported [ 5.716151] ata1.00: configured for UDMA/133 [ 5.716459] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5 [ 5.716784] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.716826] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 5.716837] sd 0:0:0:0: [sda] Write Protect is off [ 5.716839] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.716856] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.718418] sda: sda1 sda2 sda3 sda4 [ 5.720511] sd 0:0:0:0: [sda] supports TCG Opal [ 5.720517] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.944102] usb 2-1.2: new low-speed USB device number 3 using ehci-pci [ 6.031193] ata2: SATA link down (SStatus 0 SControl 300) [ 6.072814] usb 2-1.2: New USB device found, idVendor=045e, idProduct=00dd [ 6.072821] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.072826] usb 2-1.2: Product: Comfort Curve Keyboard 2000 [ 6.072830] usb 2-1.2: Manufacturer: Microsoft [ 6.079087] hidraw: raw HID events driver (C) Jiri Kosina [ 6.099392] usbcore: registered new interface driver usbhid [ 6.099393] usbhid: USB HID core driver [ 6.102312] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:045E:00DD.0001/input/input3 [ 6.140109] tsc: Refined TSC clocksource calibration: 2494.333 MHz [ 6.140129] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45085418, max_idle_ns: 440795285711 ns [ 6.152111] usb 2-1.3: new full-speed USB device number 4 using ehci-pci [ 6.160266] hid-generic 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.0-1.2/input0 [ 6.160452] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:045E:00DD.0002/input/input4 [ 6.220261] hid-generic 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.0-1.2/input1 [ 6.264192] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c52b [ 6.264199] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.264204] usb 2-1.3: Product: USB Receiver [ 6.264208] usb 2-1.3: Manufacturer: Logitech [ 6.272497] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input2 [ 6.347108] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.349516] ata3.00: ATAPI: Slimtype BD E DL4ETS, QAB1, max UDMA/100 [ 6.351876] ata3.00: configured for UDMA/100 [ 6.355102] scsi 2:0:0:0: CD-ROM Slimtype BD E DL4ETS QAB1 PQ: 0 ANSI: 5 [ 6.403090] input: Logitech Performance MX as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.2/0003:046D:C52B.0005/0003:046D:101A.0006/input/input5 [ 6.403240] logitech-hidpp-device 0003:046D:101A.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Performance MX] on usb-0000:00:1d.0-1.3:1 [ 6.420990] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy [ 6.420995] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 6.421169] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 6.421252] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 6.735292] ata4: SATA link down (SStatus 0 SControl 300) [ 7.014283] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 7.150345] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.164258] clocksource: Switched to clocksource tsc [ 7.341310] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 7.360334] systemd[1]: Detected architecture x86-64. [ 7.361970] systemd[1]: Set hostname to . [ 7.476377] systemd[1]: Created slice System Slice. [ 7.476484] systemd[1]: Listening on Network Service Netlink Socket. [ 7.476530] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 7.476593] systemd[1]: Listening on udev Control Socket. [ 7.476649] systemd[1]: Listening on udev Kernel Socket. [ 7.476691] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.476756] systemd[1]: Listening on Journal Socket. [ 7.505289] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 7.505335] RPC: Registered named UNIX socket transport module. [ 7.505336] RPC: Registered udp transport module. [ 7.505337] RPC: Registered tcp transport module. [ 7.505338] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.521896] lp: driver loaded but no devices found [ 7.525621] ppdev: user-space parallel port driver [ 7.583115] systemd-journald[276]: Received request to flush runtime journal from PID 1 [ 7.807973] nuvoton-cir 00:02: found NCT6776F or compatible: chip id: 0xc3 0x33 [ 7.813259] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.817325] lirc_dev: IR Remote Control driver registered, major 240 [ 7.819735] IR LIRC bridge handler initialized [ 7.864435] Registered IR keymap rc-rc6-mce [ 7.872093] IR RC6 protocol handler initialized [ 7.887182] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 238 [ 7.902632] rc rc0: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:02/rc/rc0 [ 7.902701] input: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:02/rc/rc0/input6 [ 7.907735] lirc lirc0: lirc_dev: driver ir-lirc-codec (nuvoton-cir) registered at minor = 0 [ 7.907763] nuvoton-cir 00:02: driver has been successfully loaded [ 7.943319] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.946560] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.007329] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 8.007333] cfg80211: failed to load regulatory.db [ 8.014131] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 8.014133] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 8.014134] RAPL PMU: hw unit of domain package 2^-16 Joules [ 8.014135] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 8.098607] ACPI Warning: \_SB.PCI0.P0P1.XVS0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100) [ 8.110576] AVX version of gcm_enc/dec engaged. [ 8.110577] AES CTR mode by8 optimization enabled [ 8.111924] ath9k 0000:04:00.0: enabling device (0000 -> 0002) [ 8.142852] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 8.143261] snd_hda_intel 0000:01:00.1: Disabling MSI [ 8.143267] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 8.205509] ath: EEPROM regdomain: 0x60 [ 8.205511] ath: EEPROM indicates we should expect a direct regpair map [ 8.205513] ath: Country alpha2 being used: 00 [ 8.205514] ath: Regpair used: 0x60 [ 8.212793] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 8.212798] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 8.212800] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 8.212801] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 8.212803] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 8.212804] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 8.212807] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 8.212811] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 8.212812] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 8.217513] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window] [ 8.217680] caller os_map_kernel_space.part.7+0xda/0x120 [nvidia] mapping multiple BARs [ 8.239805] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 8.239872] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 8.239939] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 8.239998] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 8.240077] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 8.240137] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 8.240201] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 8.270905] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 8.271473] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffa13b42540000, irq=18 [ 8.511485] random: crng init done [ 8.603451] intel_rapl: Found RAPL domain package [ 8.603452] intel_rapl: Found RAPL domain core [ 8.603453] intel_rapl: Found RAPL domain uncore [ 8.603457] intel_rapl: RAPL package 0 domain package locked by BIOS [ 8.635346] gpio_ich: GPIO from 436 to 511 on gpio_ich [ 8.731038] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0 [ 8.744669] Adding 7812092k swap on /dev/sda3. Priority:-2 extents:1 across:7812092k SSFS [ 8.853822] NVRM: Your system is not currently configured to drive a VGA console on the primary VGA device. The NVIDIA Linux graphics driver requires the use of a text-mode VGA console. Use of other console drivers including, but not limited to, vesafb, may result in corruption and stability problems, and is not supported. [ 8.874282] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 8.964932] audit: type=1400 audit(1522259455.211:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=761 comm="apparmor_parser" [ 8.964937] audit: type=1400 audit(1522259455.211:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=760 comm="apparmor_parser" [ 8.967235] audit: type=1400 audit(1522259455.211:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=763 comm="apparmor_parser" [ 8.967240] audit: type=1400 audit(1522259455.211:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=763 comm="apparmor_parser" [ 8.967242] audit: type=1400 audit(1522259455.211:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=763 comm="apparmor_parser" [ 8.967245] audit: type=1400 audit(1522259455.211:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=763 comm="apparmor_parser" [ 8.967953] audit: type=1400 audit(1522259455.211:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4206/usr/lib/snapd/snap-confine" pid=764 comm="apparmor_parser" [ 8.967957] audit: type=1400 audit(1522259455.211:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4206/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=764 comm="apparmor_parser" [ 8.967960] audit: type=1400 audit(1522259455.211:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4206/usr/lib/snapd/snap-confine//snap_update_ns" pid=764 comm="apparmor_parser" [ 8.968457] audit: type=1400 audit(1522259455.215:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=762 comm="apparmor_parser" [ 9.474610] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 9.623973] r8169 0000:05:00.0 enp5s0: link down [ 9.626004] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 9.631055] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 9.865416] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14 [ 9.865540] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15 [ 9.865630] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16 [ 9.865726] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17 [ 10.221335] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window] [ 10.221504] caller os_map_kernel_space.part.7+0xda/0x120 [nvidia] mapping multiple BARs [ 10.707661] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window] [ 10.707827] caller os_map_kernel_space.part.7+0xda/0x120 [nvidia] mapping multiple BARs [ 10.899426] nvidia-modeset: Allocated GPU:0 (GPU-ed5309ee-dc18-a709-4efe-f9c98a278022) @ PCI:0000:01:00.0 [ 11.972740] r8169 0000:05:00.0 enp5s0: link up [ 11.972761] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready [ 53.922471] snd_hda_codec_hdmi hdaudioC1D1: HDMI: invalid ELD data byte 8 [ 56.710620] logitech-hidpp-device 0003:046D:101A.0006: HID++ 1.0 device connected. [ 59.962069] rfkill: input handler disabled [ 470.565189] PM: suspend entry (deep) [ 470.565191] PM: Syncing filesystems ... done. [ 470.699384] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 470.701612] OOM killer disabled. [ 470.701613] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 470.702898] Suspending console(s) (use no_console_suspend to debug) [ 470.703448] nuvoton-cir 00:02: disabled [ 470.728330] snd_hda_codec_hdmi hdaudioC1D1: HDMI: invalid ELD data byte 0 [ 470.732355] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 470.732455] sd 0:0:0:0: [sda] Stopping disk [ 470.953935] ACPI: Preparing to enter system sleep state S3 [ 471.369164] PM: Saving platform NVS memory [ 471.370091] Disabling non-boot CPUs ... [ 471.385366] IRQ 43: no longer affine to CPU1 [ 471.386408] smpboot: CPU 1 is now offline [ 471.406544] smpboot: CPU 2 is now offline [ 471.428925] IRQ 16: no longer affine to CPU3 [ 471.428934] IRQ 24: no longer affine to CPU3 [ 471.428942] IRQ 28: no longer affine to CPU3 [ 471.429055] IRQ 30: no longer affine to CPU3 [ 471.429271] IRQ 33: no longer affine to CPU3 [ 471.429380] IRQ 34: no longer affine to CPU3 [ 471.430627] smpboot: CPU 3 is now offline [ 471.432733] ACPI: Low-level resume complete [ 471.432788] PM: Restoring platform NVS memory [ 471.433843] Enabling non-boot CPUs ... [ 471.433886] x86: Booting SMP configuration: [ 471.433887] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 471.436514] TSC synchronization [CPU#0 -> CPU#1]: [ 471.436515] Measured 256602354 cycles TSC warp between CPUs, turning off TSC clock. [ 471.436519] tsc: Marking TSC unstable due to check_tsc_sync_source failed [ 471.436524] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'. [ 471.436526] sched_clock: Marking unstable (471138193985, 296315988)<-(471435211608, 1312561) [ 471.539605] cache: parent cpu1 should not be sleeping [ 471.437117] CPU1 is up [ 471.540113] clocksource: Switched to clocksource hpet [ 471.438509] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 471.438509] cache: parent cpu2 should not be sleeping [ 471.438509] CPU2 is up [ 471.438509] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 471.438509] cache: parent cpu3 should not be sleeping [ 471.438509] CPU3 is up [ 471.441643] ACPI: Waking up from system sleep state S3 [ 471.465709] nuvoton-cir 00:02: activated [ 471.526978] sd 0:0:0:0: [sda] Starting disk [ 471.689171] OOM killer enabled. [ 471.689172] Restarting tasks ... done. [ 471.696860] PM: suspend exit [ 471.711188] rfkill: input handler enabled [ 471.768352] usb 1-1.3: new high-speed USB device number 3 using ehci-pci [ 471.830796] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 471.830828] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 471.830852] ata2: SATA link down (SStatus 0 SControl 300) [ 471.830878] ata4: SATA link down (SStatus 0 SControl 300) [ 471.831072] ata1.00: supports DRM functions and may not be fully accessible [ 471.833042] ata3.00: configured for UDMA/100 [ 471.849548] ata1.00: NCQ Send/Recv Log not supported [ 471.850635] ata1.00: supports DRM functions and may not be fully accessible [ 471.850979] ata1.00: NCQ Send/Recv Log not supported [ 471.851786] ata1.00: configured for UDMA/133 [ 471.884988] rfkill: input handler disabled [ 471.886379] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 472.032260] r8169 0000:05:00.0 enp5s0: link down [ 472.032403] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 472.035708] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 472.129951] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0138 [ 472.129955] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 472.129958] usb 1-1.3: Product: USB2.0-CRW [ 472.129959] usb 1-1.3: Manufacturer: Generic [ 472.129961] usb 1-1.3: SerialNumber: 20090516388200000 [ 472.176299] usbcore: registered new interface driver usb-storage [ 472.179477] usbcore: registered new interface driver uas [ 472.184404] ums-realtek 1-1.3:1.0: USB Mass Storage device detected [ 472.214918] scsi host6: usb-storage 1-1.3:1.0 [ 472.215049] usbcore: registered new interface driver ums-realtek [ 472.235681] usb 1-1.3: USB disconnect, device number 3 [ 474.353313] do_IRQ: 3.40 No irq handler for vector [ 509.625730] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 509.630005] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 794.657661] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 794.658353] r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0x000000003c5f17bf, bc:5f:f4:2c:f6:c1, XID 0c200000 IRQ 40 [ 794.658357] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 794.661266] r8169 0000:05:00.0 enp5s0: renamed from eth0 [ 794.702585] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 794.848231] r8169 0000:05:00.0 enp5s0: link down [ 794.848613] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 797.150443] r8169 0000:05:00.0 enp5s0: link up [ 797.150464] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready [ 8606.822205] perf: interrupt took too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [14148.801684] perf: interrupt took too long (3191 > 3135), lowering kernel.perf_event_max_sample_rate to 62500 [15484.563246] PM: suspend entry (deep) [15484.563248] PM: Syncing filesystems ... done. [15484.740365] Freezing user space processes ... (elapsed 0.002 seconds) done. [15484.742766] OOM killer disabled. [15484.742767] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [15484.744209] Suspending console(s) (use no_console_suspend to debug) [15484.745027] nuvoton-cir 00:02: disabled [15484.768401] sd 0:0:0:0: [sda] Synchronizing SCSI cache [15484.768540] sd 0:0:0:0: [sda] Stopping disk [15484.772341] snd_hda_codec_hdmi hdaudioC1D1: HDMI: invalid ELD data byte 0 [15484.998018] ACPI: Preparing to enter system sleep state S3 [15485.621195] PM: Saving platform NVS memory [15485.622151] Disabling non-boot CPUs ... [15485.637133] IRQ 43: no longer affine to CPU1 [15485.638189] smpboot: CPU 1 is now offline [15485.658876] smpboot: CPU 2 is now offline [15485.676993] IRQ 16: no longer affine to CPU3 [15485.678043] smpboot: CPU 3 is now offline [15485.678090] ACPI: Low-level resume complete [15485.678090] PM: Restoring platform NVS memory [15485.678090] Enabling non-boot CPUs ... [15485.678090] x86: Booting SMP configuration: [15485.678090] smpboot: Booting Node 0 Processor 1 APIC 0x2 [15485.679940] cache: parent cpu1 should not be sleeping [15485.680365] CPU1 is up [15485.680449] smpboot: Booting Node 0 Processor 2 APIC 0x1 [15485.681289] cache: parent cpu2 should not be sleeping [15485.681732] CPU2 is up [15485.681852] smpboot: Booting Node 0 Processor 3 APIC 0x3 [15485.682633] cache: parent cpu3 should not be sleeping [15485.683094] CPU3 is up [15485.686778] ACPI: Waking up from system sleep state S3 [15485.716921] nuvoton-cir 00:02: activated [15485.728407] sd 0:0:0:0: [sda] Starting disk [15485.888805] OOM killer enabled. [15485.888807] Restarting tasks ... [15485.902814] rfkill: input handler enabled [15485.906378] done. [15485.906427] PM: suspend exit [15485.980375] usb 1-1.3: new high-speed USB device number 4 using ehci-pci [15486.052368] snd_hda_codec_hdmi hdaudioC1D1: HDMI: invalid ELD data byte 12 [15486.074766] ata4: SATA link down (SStatus 0 SControl 300) [15486.074792] ata2: SATA link down (SStatus 0 SControl 300) [15486.076514] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [15486.076611] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [15486.076820] ata1.00: supports DRM functions and may not be fully accessible [15486.078679] ata3.00: configured for UDMA/100 [15486.095697] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [15486.096430] ata1.00: NCQ Send/Recv Log not supported [15486.097526] ata1.00: supports DRM functions and may not be fully accessible [15486.097985] ata1.00: NCQ Send/Recv Log not supported [15486.098807] ata1.00: configured for UDMA/133 [15486.098856] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [15486.126247] rfkill: input handler disabled [15486.235492] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0138 [15486.235495] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [15486.235497] usb 1-1.3: Product: USB2.0-CRW [15486.235499] usb 1-1.3: Manufacturer: Generic [15486.235501] usb 1-1.3: SerialNumber: 20090516388200000 [15486.241311] ums-realtek 1-1.3:1.0: USB Mass Storage device detected [15486.248259] r8169 0000:05:00.0 enp5s0: link down [15486.248501] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [15486.265867] scsi host6: usb-storage 1-1.3:1.0 [15486.483725] usb 1-1.3: USB disconnect, device number 4 [15488.623583] do_IRQ: 2.34 No irq handler for vector [15776.894420] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [15776.895135] r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0x000000003c5f17bf, bc:5f:f4:2c:f6:c1, XID 0c200000 IRQ 40 [15776.895138] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [15776.898244] r8169 0000:05:00.0 enp5s0: renamed from eth0 [15776.924710] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [15777.068255] r8169 0000:05:00.0 enp5s0: link down [15777.068265] r8169 0000:05:00.0 enp5s0: link down [15777.068474] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [15779.899255] r8169 0000:05:00.0 enp5s0: link up [15779.899275] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready