[ 0.000000] Linux version 4.15.0-12-generic (buildd@lgw01-amd64-002) (gcc version 7.3.0 (Ubuntu 7.3.0-5ubuntu1)) #13-Ubuntu SMP Thu Mar 8 06:24:47 UTC 2018 (Ubuntu 4.15.0-12.13-generic 4.15.7) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-12-generic root=UUID=bc171dce-b703-44f6-8244-22b6b3b1dc33 ro video=SVIDEO-1:d consoleblank=300 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf67ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf680000-0x00000000bf68ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf690000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: FUJITSU SIEMENS ESPRIMO Mobile U9200/S11D, BIOS 1.11 - 067 - 1566 04/22/2008 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 000000000 mask F00000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 0BF700000 mask FFFF00000 uncachable [ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 4087M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 5 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xbf700000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbf680 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f77a0-0x000f77af] mapped at [ (ptrval)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576 [ 0.000000] BRK [0x139d3e000, 0x139d3efff] PGTABLE [ 0.000000] BRK [0x139d3f000, 0x139d3ffff] PGTABLE [ 0.000000] BRK [0x139d40000, 0x139d40fff] PGTABLE [ 0.000000] BRK [0x139d41000, 0x139d41fff] PGTABLE [ 0.000000] BRK [0x139d42000, 0x139d42fff] PGTABLE [ 0.000000] BRK [0x139d43000, 0x139d43fff] PGTABLE [ 0.000000] BRK [0x139d44000, 0x139d44fff] PGTABLE [ 0.000000] BRK [0x139d45000, 0x139d45fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x317a9000-0x34bcbfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F7710 000024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 0x00000000BF686FBB 00008C (v01 FSC PC 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 0x00000000BF68ED0C 0000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 0x00000000BF688502 006796 (v02 IEC___ S11_____ 06040000 INTL 20050624) [ 0.000000] ACPI: FACS 0x00000000BF68FFC0 000040 [ 0.000000] ACPI: FACS 0x00000000BF68FFC0 000040 [ 0.000000] ACPI: APIC 0x00000000BF68EE00 000068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: HPET 0x00000000BF68EE68 000038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 0x00000000BF68EEA0 00003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: SLIT 0x00000000BF68EEDC 00003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: TCPA 0x00000000BF68EF18 000032 (v01 Intel CRESTLN 06040000 00005A52) [ 0.000000] ACPI: TMOR 0x00000000BF68EF4A 000026 (v01 PTLTD 06040000 PTL 00000003) [ 0.000000] ACPI: APIC 0x00000000BF68EF70 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 0x00000000BF68EFD8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 0x00000000BF688225 0002DD (v01 SataRe SataAhci 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 0x00000000BF6875D3 00025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 0x00000000BF68752D 0000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 0x00000000BF687047 0004E6 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x13ffd5000-0x13fffffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bf67ffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff] [ 0.000000] On node 0 totalpages: 1046046 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12186 pages used for memmap [ 0.000000] DMA32 zone: 779904 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] Reserving Intel graphics memory at 0x00000000bf800000-0x00000000bfffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff] [ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf680000-0xbf68ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf690000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfed13fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u1048576 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1029679 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-12-generic root=UUID=bc171dce-b703-44f6-8244-22b6b3b1dc33 ro video=SVIDEO-1:d consoleblank=300 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3970680K/4184184K available (12300K kernel code, 2472K rwdata, 4224K rodata, 2404K init, 2416K bss, 213504K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39194 entries in 154 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x678F (20170831/psloop-247) [ 0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.000000] HPET config register value = 0xFFFFFFFF. Disabling HPET [ 0.004000] APIC: Switch to symmetric I/O mode setup [ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.024000] tsc: Fast TSC calibration using PIT [ 0.028000] tsc: Detected 2493.589 MHz processor [ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4987.17 BogoMIPS (lpj=9974356) [ 0.028000] pid_max: default: 32768 minimum: 301 [ 0.028000] Security Framework initialized [ 0.028000] Yama: becoming mindful. [ 0.028000] AppArmor: AppArmor initialized [ 0.033252] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.034307] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.034360] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.034398] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.034727] CPU: Physical Processor ID: 0 [ 0.034730] CPU: Processor Core ID: 0 [ 0.034733] mce: CPU supports 6 MCE banks [ 0.034745] process: using mwait in idle threads [ 0.034751] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.034753] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.034757] Spectre V2 : Mitigation: Full generic retpoline [ 0.034916] Freeing SMP alternatives memory: 36K [ 0.044000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz (family: 0x6, model: 0x17, stepping: 0x6) [ 0.044000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.044000] ... version: 2 [ 0.044000] ... bit width: 40 [ 0.044000] ... generic registers: 2 [ 0.044000] ... value mask: 000000ffffffffff [ 0.044000] ... max period: 000000007fffffff [ 0.044000] ... fixed-purpose events: 3 [ 0.044000] ... event mask: 0000000700000003 [ 0.044000] Hierarchical SRCU implementation. [ 0.044000] smp: Bringing up secondary CPUs ... [ 0.044000] x86: Booting SMP configuration: [ 0.044000] .... node #0, CPUs: #1 [ 0.044104] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.044152] smp: Brought up 1 node, 2 CPUs [ 0.044152] smpboot: Max logical packages: 1 [ 0.044152] smpboot: Total of 2 processors activated (9974.35 BogoMIPS) [ 0.048067] devtmpfs: initialized [ 0.048095] x86/mm: Memory block size: 128MB [ 0.048299] evm: security.selinux [ 0.048303] evm: security.SMACK64 [ 0.048305] evm: security.SMACK64EXEC [ 0.048307] evm: security.SMACK64TRANSMUTE [ 0.048310] evm: security.SMACK64MMAP [ 0.048312] evm: security.apparmor [ 0.048314] evm: security.ima [ 0.048316] evm: security.capability [ 0.048386] PM: Registering ACPI NVS region [mem 0xbf680000-0xbf68ffff] (65536 bytes) [ 0.048450] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.048450] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.048450] pinctrl core: initialized pinctrl subsystem [ 0.048450] RTC time: 0:46:57, date: 03/24/18 [ 0.048450] NET: Registered protocol family 16 [ 0.048450] audit: initializing netlink subsys (disabled) [ 0.048452] audit: type=2000 audit(1521852417.048:1): state=initialized audit_enabled=0 res=1 [ 0.048452] cpuidle: using governor ladder [ 0.048452] cpuidle: using governor menu [ 0.048452] Simple Boot Flag at 0x36 set to 0x1 [ 0.048452] ACPI: bus type PCI registered [ 0.048452] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.048452] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.048452] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.048452] PCI: Using configuration type 1 for base access [ 0.049669] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.049669] ACPI: Added _OSI(Module Device) [ 0.049669] ACPI: Added _OSI(Processor Device) [ 0.052006] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.052009] ACPI: Added _OSI(Processor Aggregator Device) [ 0.054085] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.055987] ACPI: Dynamic OEM Table Load: [ 0.056004] ACPI: SSDT 0xFFFF8BFBBA558000 0002BC (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.056362] ACPI: Dynamic OEM Table Load: [ 0.056371] ACPI: SSDT 0xFFFF8BFBBA4F8800 0005EA (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.057040] ACPI: Dynamic OEM Table Load: [ 0.057048] ACPI: SSDT 0xFFFF8BFBBA535900 0000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.057260] ACPI: Dynamic OEM Table Load: [ 0.057268] ACPI: SSDT 0xFFFF8BFBBA575CC0 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.057840] ACPI: EC: EC started [ 0.057844] ACPI: EC: interrupt blocked [ 0.059560] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC [ 0.059565] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.059570] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions [ 0.059573] ACPI: Interpreter enabled [ 0.059596] ACPI: (supports S0 S3 S4 S5) [ 0.059599] ACPI: Using IOAPIC for interrupt routing [ 0.059631] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.060000] ACPI: GPE 0x18 active on init [ 0.060000] ACPI: Enabled 11 GPEs in block 00 to 1F [ 1.088104] acpi SADDLEST:00: ACPI dock station (docks/bays count: 1) [ 1.096507] ACPI: Power Resource [FN00] (on) [ 1.632634] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.632644] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.632652] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 1.633433] PCI host bridge to bus 0000:00 [ 1.633439] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.633443] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.633446] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.633451] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 1.633455] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 1.633459] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 1.633463] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 1.633468] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.633480] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000 [ 1.633618] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000 [ 1.633632] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfc0fffff 64bit] [ 1.633639] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.633644] pci 0000:00:02.0: reg 0x20: [io 0x1c00-0x1c07] [ 1.633766] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000 [ 1.633777] pci 0000:00:02.1: reg 0x10: [mem 0xfc100000-0xfc1fffff 64bit] [ 1.633929] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300 [ 1.633985] pci 0000:00:1a.0: reg 0x20: [io 0x1840-0x185f] [ 1.634119] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300 [ 1.634174] pci 0000:00:1a.1: reg 0x20: [io 0x1860-0x187f] [ 1.634318] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320 [ 1.634344] pci 0000:00:1a.7: reg 0x10: [mem 0xfc406000-0xfc4063ff] [ 1.634443] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 1.634557] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300 [ 1.634582] pci 0000:00:1b.0: reg 0x10: [mem 0xfc400000-0xfc403fff 64bit] [ 1.634667] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.634789] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 [ 1.634883] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.635006] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400 [ 1.635106] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.635228] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400 [ 1.635322] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 1.635445] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 [ 1.635501] pci 0000:00:1d.0: reg 0x20: [io 0x1880-0x189f] [ 1.635635] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 [ 1.635690] pci 0000:00:1d.1: reg 0x20: [io 0x18a0-0x18bf] [ 1.635822] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300 [ 1.635877] pci 0000:00:1d.2: reg 0x20: [io 0x18c0-0x18df] [ 1.636023] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 [ 1.636049] pci 0000:00:1d.7: reg 0x10: [mem 0xfc406400-0xfc4067ff] [ 1.636148] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.636258] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 1.636431] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100 [ 1.636534] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 1.636541] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 1.636550] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 1.636556] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 000f) [ 1.636562] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0300 (mask 000f) [ 1.636701] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a [ 1.636722] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] [ 1.636733] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] [ 1.636744] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007] [ 1.636754] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003] [ 1.636765] pci 0000:00:1f.1: reg 0x20: [io 0x1830-0x183f] [ 1.636789] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.636793] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.636797] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 1.636801] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.636916] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601 [ 1.636939] pci 0000:00:1f.2: reg 0x10: [io 0x1c18-0x1c1f] [ 1.636948] pci 0000:00:1f.2: reg 0x14: [io 0x1c0c-0x1c0f] [ 1.636958] pci 0000:00:1f.2: reg 0x18: [io 0x1c10-0x1c17] [ 1.636967] pci 0000:00:1f.2: reg 0x1c: [io 0x1c08-0x1c0b] [ 1.636976] pci 0000:00:1f.2: reg 0x20: [io 0x1c20-0x1c3f] [ 1.636986] pci 0000:00:1f.2: reg 0x24: [mem 0xfc405000-0xfc4057ff] [ 1.637037] pci 0000:00:1f.2: PME# supported from D3hot [ 1.637145] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500 [ 1.637164] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff] [ 1.637199] pci 0000:00:1f.3: reg 0x20: [io 0x18e0-0x18ff] [ 1.637390] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 1.637397] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 1.637401] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff] [ 1.637408] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 1.637511] pci 0000:04:00.0: [11ab:4363] type 00 class 0x020000 [ 1.637550] pci 0000:04:00.0: reg 0x10: [mem 0xf8000000-0xf8003fff 64bit] [ 1.637564] pci 0000:04:00.0: reg 0x18: [io 0x3000-0x30ff] [ 1.637614] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 1.637697] pci 0000:04:00.0: supports D1 D2 [ 1.637699] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.648022] pci 0000:00:1c.1: PCI bridge to [bus 04-05] [ 1.648029] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 1.648033] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff] [ 1.648040] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 1.648145] pci 0000:06:00.0: [8086:4229] type 00 class 0x028000 [ 1.648196] pci 0000:06:00.0: reg 0x10: [mem 0xfa000000-0xfa001fff 64bit] [ 1.648364] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.660027] pci 0000:00:1c.2: PCI bridge to [bus 06-07] [ 1.660034] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 1.660039] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff] [ 1.660045] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref] [ 1.660184] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode) [ 1.660198] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 1.660200] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 1.660202] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 1.660204] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 1.660205] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 1.660207] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 1.660209] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode) [ 1.660414] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 1.660512] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 1.660610] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 1.660706] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 1.660802] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 1.660900] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 1.661000] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 1.661098] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 1.661759] ACPI Warning: GPE type mismatch (level/edge) (20170831/evxface-826) [ 1.661766] ACPI: EC: interrupt unblocked [ 1.661776] ACPI: EC: event unblocked [ 1.661785] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 1.661789] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events [ 1.662070] SCSI subsystem initialized [ 1.662084] libata version 3.00 loaded. [ 1.662084] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 1.662084] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.662084] pci 0000:00:02.0: vgaarb: bridge control possible [ 1.662084] vgaarb: loaded [ 1.662084] ACPI: bus type USB registered [ 1.662084] usbcore: registered new interface driver usbfs [ 1.662084] usbcore: registered new interface driver hub [ 1.662084] usbcore: registered new device driver usb [ 1.662084] EDAC MC: Ver: 3.0.0 [ 1.662084] PCI: Using ACPI for IRQ routing [ 1.671762] PCI: pci_cache_line_size set to 64 bytes [ 1.671826] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 1.671827] e820: reserve RAM buffer [mem 0xbf680000-0xbfffffff] [ 1.671940] NetLabel: Initializing [ 1.671943] NetLabel: domain hash size = 128 [ 1.671946] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.671969] NetLabel: unlabeled traffic allowed by default [ 1.672127] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.672136] hpet clockevent registered [ 1.672142] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 1.672148] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.672154] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 1.674170] clocksource: Switched to clocksource hpet [ 1.690006] VFS: Disk quotas dquot_6.6.0 [ 1.690040] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.690210] AppArmor: AppArmor Filesystem Enabled [ 1.690265] pnp: PnP ACPI init [ 2.240335] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.240341] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved [ 2.240345] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 2.240349] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 2.240353] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 2.240357] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.240361] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 2.240365] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 2.240375] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.240820] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved [ 2.240829] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 2.240898] system 00:02: [io 0x0200-0x020f] has been reserved [ 2.240903] system 00:02: [io 0x0400-0x040f] has been reserved [ 2.240907] system 00:02: [io 0x0680-0x069f] has been reserved [ 2.240911] system 00:02: [io 0x0800-0x080f] has been reserved [ 2.240915] system 00:02: [io 0x1000-0x107f] has been reserved [ 2.240919] system 00:02: [io 0x1180-0x11bf] has been reserved [ 2.240923] system 00:02: [io 0x1640-0x164f] has been reserved [ 2.240927] system 00:02: [io 0xfe00] has been reserved [ 2.240934] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.241008] system 00:03: [io 0x06a0-0x06af] has been reserved [ 2.241013] system 00:03: [io 0x06b0-0x06ff] has been reserved [ 2.241020] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.241059] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.241524] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.242178] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active) [ 2.242217] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 2.242247] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active) [ 2.242270] pnp: PnP ACPI: found 9 devices [ 2.249190] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 2.249243] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff] [ 2.249251] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 2.249256] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 2.249264] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff] [ 2.249270] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 2.249280] pci 0000:04:00.0: BAR 6: assigned [mem 0xf8020000-0xf803ffff pref] [ 2.249285] pci 0000:00:1c.1: PCI bridge to [bus 04-05] [ 2.249289] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 2.249297] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff] [ 2.249302] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 2.249312] pci 0000:00:1c.2: PCI bridge to [bus 06-07] [ 2.249316] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 2.249323] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff] [ 2.249329] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref] [ 2.249339] pci 0000:00:1e.0: PCI bridge to [bus 08] [ 2.249354] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 2.249356] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 2.249357] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 2.249359] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 2.249361] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 2.249362] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 2.249364] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff window] [ 2.249366] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 2.249368] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff] [ 2.249369] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref] [ 2.249371] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] [ 2.249373] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff] [ 2.249375] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref] [ 2.249376] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff] [ 2.249378] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff] [ 2.249380] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref] [ 2.249382] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7 window] [ 2.249383] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff window] [ 2.249385] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff window] [ 2.249387] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000d3fff window] [ 2.249388] pci_bus 0000:08: resource 8 [mem 0x000d4000-0x000d7fff window] [ 2.249390] pci_bus 0000:08: resource 9 [mem 0x000d8000-0x000dbfff window] [ 2.249392] pci_bus 0000:08: resource 10 [mem 0xc0000000-0xfebfffff window] [ 2.249512] NET: Registered protocol family 2 [ 2.249888] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 2.250058] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 2.250342] TCP: Hash tables configured (established 32768 bind 32768) [ 2.250424] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 2.250465] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 2.250550] NET: Registered protocol family 1 [ 2.250569] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.252873] PCI: CLS 64 bytes, default 64 [ 2.252925] Unpacking initramfs... [ 3.196685] Freeing initrd memory: 53388K [ 3.196705] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.196712] software IO TLB [mem 0xbb680000-0xbf680000] (64MB) mapped at [0000000075ae05bb-00000000f69351b0] [ 3.196900] Scanning for low memory corruption every 60 seconds [ 3.197696] Initialise system trusted keyrings [ 3.197714] Key type blacklist registered [ 3.197814] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 3.199592] zbud: loaded [ 3.200200] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.200382] fuse init (API version 7.26) [ 3.202172] Key type asymmetric registered [ 3.202176] Asymmetric key parser 'x509' registered [ 3.202224] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 3.202269] io scheduler noop registered [ 3.202273] io scheduler deadline registered [ 3.202335] io scheduler cfq registered (default) [ 3.202471] pcieport 0000:00:1c.0: enabling device (0000 -> 0003) [ 3.203133] pcieport 0000:00:1c.2: enabling device (0000 -> 0003) [ 3.203492] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 3.203495] vesafb: scrolling: redraw [ 3.203499] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 3.203517] vesafb: framebuffer at 0xd0000000, mapped to 0x0000000066c3930b, using 3072k, total 3072k [ 3.227494] Console: switching to colour frame buffer device 128x48 [ 3.251601] fb0: VESA VGA frame buffer device [ 3.251815] intel_idle: does not run on family 6 model 23 [ 3.256103] ACPI: AC Adapter [ADP1] (on-line) [ 3.256372] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 3.256769] ACPI: Lid Switch [LID0] [ 3.256975] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 3.257360] ACPI: Sleep Button [SLPB] [ 3.257568] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 3.257954] ACPI: Power Button [PWRB] [ 3.258175] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 3.258525] ACPI: Power Button [PWRF] [ 3.259079] Monitor-Mwait will be used to enter C-1 state [ 3.259088] Monitor-Mwait will be used to enter C-2 state [ 3.259094] tsc: Marking TSC unstable due to TSC halts in idle [ 3.261231] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 3.261832] thermal LNXTHERM:00: registered as thermal_zone0 [ 3.262088] ACPI: Thermal Zone [TZ00] (27 C) [ 3.262575] ACPI: Invalid active1 threshold [ 3.262955] thermal LNXTHERM:01: registered as thermal_zone1 [ 3.263211] ACPI: Thermal Zone [TZ01] (48 C) [ 3.263561] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 3.284389] 00:05: ttyS0 at I/O 0x3f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.388590] Linux agpgart interface v0.103 [ 3.391038] loop: module loaded [ 3.391423] ata_piix 0000:00:1f.1: version 2.13 [ 3.392484] scsi host0: ata_piix [ 3.403350] scsi host1: ata_piix [ 3.413850] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14 [ 3.424364] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15 [ 3.434846] libphy: Fixed MDIO Bus: probed [ 3.445085] tun: Universal TUN/TAP device driver, 1.6 [ 3.455476] PPP generic driver version 2.4.2 [ 3.456556] ACPI: Battery Slot [BAT0] (battery present) [ 3.464056] ACPI: Battery Slot [BAT1] (battery absent) [ 3.486110] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.496272] ehci-pci: EHCI PCI platform driver [ 3.506624] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 3.517007] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 3.527236] ehci-pci 0000:00:1a.7: debug port 1 [ 3.541140] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 3.541151] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfc406000 [ 3.564025] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 3.574116] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.584346] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.594565] usb usb1: Product: EHCI Host Controller [ 3.604957] usb usb1: Manufacturer: Linux 4.15.0-12-generic ehci_hcd [ 3.615389] usb usb1: SerialNumber: 0000:00:1a.7 [ 3.625846] hub 1-0:1.0: USB hub found [ 3.636095] hub 1-0:1.0: 4 ports detected [ 3.646557] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 3.656618] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 3.666720] ehci-pci 0000:00:1d.7: debug port 1 [ 3.680514] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 3.680523] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfc406400 [ 3.704027] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.713785] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.723484] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.733050] usb usb2: Product: EHCI Host Controller [ 3.742421] usb usb2: Manufacturer: Linux 4.15.0-12-generic ehci_hcd [ 3.751741] usb usb2: SerialNumber: 0000:00:1d.7 [ 3.760981] hub 2-0:1.0: USB hub found [ 3.769923] hub 2-0:1.0: 6 ports detected [ 3.778883] ehci-platform: EHCI generic platform driver [ 3.787687] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.796309] ohci-pci: OHCI PCI platform driver [ 3.804624] ohci-platform: OHCI generic platform driver [ 3.812887] uhci_hcd: USB Universal Host Controller Interface driver [ 3.821407] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.829764] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 3.838217] uhci_hcd 0000:00:1a.0: detected 2 ports [ 3.846568] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840 [ 3.854880] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.863164] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.871402] usb usb3: Product: UHCI Host Controller [ 3.879625] usb usb3: Manufacturer: Linux 4.15.0-12-generic uhci_hcd [ 3.888008] usb usb3: SerialNumber: 0000:00:1a.0 [ 3.896594] hub 3-0:1.0: USB hub found [ 3.904945] hub 3-0:1.0: 2 ports detected [ 3.913633] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.922033] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 3.930540] uhci_hcd 0000:00:1a.1: detected 2 ports [ 3.938961] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001860 [ 3.947382] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.956017] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.964600] usb usb4: Product: UHCI Host Controller [ 3.973107] usb usb4: Manufacturer: Linux 4.15.0-12-generic uhci_hcd [ 3.981716] usb usb4: SerialNumber: 0000:00:1a.1 [ 3.981747] usb 1-2: new high-speed USB device number 2 using ehci-pci [ 3.999138] hub 4-0:1.0: USB hub found [ 4.007808] hub 4-0:1.0: 2 ports detected [ 4.016712] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.025331] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 4.034023] uhci_hcd 0000:00:1d.0: detected 2 ports [ 4.042572] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 4.051122] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.059734] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.068394] usb usb5: Product: UHCI Host Controller [ 4.077109] usb usb5: Manufacturer: Linux 4.15.0-12-generic uhci_hcd [ 4.085875] usb usb5: SerialNumber: 0000:00:1d.0 [ 4.094684] hub 5-0:1.0: USB hub found [ 4.103325] hub 5-0:1.0: 2 ports detected [ 4.112233] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.120985] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 4.129794] uhci_hcd 0000:00:1d.1: detected 2 ports [ 4.129800] usb 2-5: new high-speed USB device number 2 using ehci-pci [ 4.147428] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0 [ 4.156265] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.165156] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.174104] usb usb6: Product: UHCI Host Controller [ 4.183050] usb usb6: Manufacturer: Linux 4.15.0-12-generic uhci_hcd [ 4.192165] usb usb6: SerialNumber: 0000:00:1d.1 [ 4.201527] hub 6-0:1.0: USB hub found [ 4.210456] hub 6-0:1.0: 2 ports detected [ 4.219587] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.228457] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f19190519, max_idle_ns: 440795255180 ns [ 4.237721] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 4.247084] uhci_hcd 0000:00:1d.2: detected 2 ports [ 4.256319] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 4.265654] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.275054] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.275070] usb 1-2: New USB device found, idVendor=05e3, idProduct=0715 [ 4.275072] usb 1-2: New USB device strings: Mfr=3, Product=4, SerialNumber=2 [ 4.275073] usb 1-2: Product: USB Storage [ 4.275075] usb 1-2: Manufacturer: Generic [ 4.275076] usb 1-2: SerialNumber: 000000009412 [ 4.305124] usb 2-5: New USB device found, idVendor=0af0, idProduct=7601 [ 4.305125] usb 2-5: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 4.305127] usb 2-5: Product: Globetrotter HSUPA Modem [ 4.305128] usb 2-5: Manufacturer: Option N.V. [ 4.367972] usb usb7: Product: UHCI Host Controller [ 4.377104] usb usb7: Manufacturer: Linux 4.15.0-12-generic uhci_hcd [ 4.386303] usb usb7: SerialNumber: 0000:00:1d.2 [ 4.395492] hub 7-0:1.0: USB hub found [ 4.404483] hub 7-0:1.0: 2 ports detected [ 4.413574] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 4.426739] i8042: Detected active multiplexing controller, rev 1.1 [ 4.438432] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.447684] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 4.456941] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 4.466012] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 4.474970] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 4.484211] mousedev: PS/2 mouse device common for all mice [ 4.493359] rtc_cmos 00:04: RTC can wake from S4 [ 4.502316] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 4.511123] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 4.520014] i2c /dev entries driver [ 4.528856] device-mapper: uevent: version 1.0.3 [ 4.537760] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 4.546984] ledtrig-cpu: registered to indicate activity on CPUs [ 4.556677] NET: Registered protocol family 10 [ 4.568809] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 4.579365] Segment Routing with IPv6 [ 4.588777] NET: Registered protocol family 17 [ 4.598156] Key type dns_resolver registered [ 4.607575] RAS: Correctable Errors collector initialized. [ 4.616869] microcode: sig=0x10676, pf=0x80, revision=0x607 [ 4.626195] microcode: Microcode Update Driver: v2.2. [ 4.626429] registered taskstats version 1 [ 4.644717] Loading compiled-in X.509 certificates [ 4.656715] Loaded X.509 cert 'Build time autogenerated kernel key: 3d411d4fb36e828d33eb6011b15d74e32ae21608' [ 4.666489] zswap: loaded using pool lzo/zbud [ 4.679615] Key type big_key registered [ 4.689043] Key type trusted registered [ 4.699803] Key type encrypted registered [ 4.708796] AppArmor: AppArmor sha1 policy hashing enabled [ 4.718239] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 4.727383] evm: HMAC attrs: 0x1 [ 4.736696] Magic number: 10:18:760 [ 4.745742] rtc_cmos 00:04: setting system clock to 2018-03-24 00:47:02 UTC (1521852422) [ 4.755546] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 4.764707] EDD information not available. [ 4.778128] Freeing unused kernel memory: 2404K [ 4.787411] Write protecting the kernel read-only data: 20480k [ 4.797918] Freeing unused kernel memory: 2008K [ 4.812396] Freeing unused kernel memory: 1920K [ 4.830956] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.840256] x86/mm: Checking user space page tables [ 4.858090] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 5.067631] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 5.077536] acpi device:05: registered as cooling_device3 [ 5.090059] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input9 [ 5.110851] sky2: driver version 1.30 [ 5.125154] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3 [ 5.136067] sky2 0000:04:00.0 eth0: addr 00:a0:d1:cd:97:e5 [ 5.153389] usb-storage 1-2:1.0: USB Mass Storage device detected [ 5.167059] ahci 0000:00:1f.2: version 3.0 [ 5.167363] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 5.177721] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part [ 5.188670] scsi host2: usb-storage 1-2:1.0 [ 5.199100] usbcore: registered new interface driver usb-storage [ 5.209522] scsi host3: ahci [ 5.228025] scsi host4: ahci [ 5.239094] scsi host5: ahci [ 5.249052] ata3: SATA max UDMA/133 abar m2048@0xfc405000 port 0xfc405100 irq 25 [ 5.258154] sky2 0000:04:00.0 enp4s0: renamed from eth0 [ 5.269095] ata4: SATA max UDMA/133 abar m2048@0xfc405000 port 0xfc405180 irq 25 [ 5.279134] ata5: SATA max UDMA/133 abar m2048@0xfc405000 port 0xfc405200 irq 25 [ 5.291201] usbcore: registered new interface driver uas [ 5.335996] pci 0000:00:00.0: Intel 965GM Chipset [ 5.345670] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 5.357072] pci 0000:00:00.0: detected 8192K stolen memory [ 5.366833] [drm] Memory usable by graphics device = 512M [ 5.376535] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 5.376536] fb: switching to inteldrmfb from VESA VGA [ 5.386286] Console: switching to colour dummy device 80x25 [ 5.386428] [drm] Replacing VGA console driver [ 5.386489] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.386493] [drm] Driver supports precise vblank timestamp query. [ 5.386502] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window] [ 5.386511] caller pci_map_rom+0x5d/0xf0 mapping multiple BARs [ 5.387277] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 5.511835] [drm] forcing SVIDEO-1 connector off [ 5.521966] [drm] RC6 disabled, disabling runtime PM support [ 5.521977] [drm] initialized overlay support [ 5.522304] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0 [ 5.557227] fbcon: inteldrmfb (fb0) is primary device [ 5.602558] ata4: SATA link down (SStatus 0 SControl 300) [ 5.602580] ata5: SATA link down (SStatus 0 SControl 300) [ 5.602607] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.603173] ata3.00: unexpected _GTF length (8) [ 5.660539] ata3.00: ATA-8: WDC WD1200BEVS-22UST0, 01.01A01, max UDMA/133 [ 5.660541] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 5.661305] ata3.00: unexpected _GTF length (8) [ 5.661513] ata3.00: configured for UDMA/133 [ 5.661756] scsi 3:0:0:0: Direct-Access ATA WDC WD1200BEVS-2 1A01 PQ: 0 ANSI: 5 [ 5.662036] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 5.662159] sd 3:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 5.662174] sd 3:0:0:0: [sda] Write Protect is off [ 5.662176] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.662199] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.702765] sda: sda1 sda2 < sda5 sda6 sda7 > [ 5.703336] sd 3:0:0:0: [sda] Attached SCSI disk [ 6.007680] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04753/0x200000/0x0/0x0, board id: 0, fw id: 189075 [ 6.040307] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13 [ 6.210713] scsi 2:0:0:0: Direct-Access Generic STORAGE DEVICE 9412 PQ: 0 ANSI: 0 [ 6.211032] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 6.212329] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 6.253498] Console: switching to colour frame buffer device 160x50 [ 6.273512] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 7.240046] raid6: sse2x1 gen() 3871 MB/s [ 7.288036] raid6: sse2x1 xor() 4389 MB/s [ 7.336033] raid6: sse2x2 gen() 4360 MB/s [ 7.384032] raid6: sse2x2 xor() 5332 MB/s [ 7.432037] raid6: sse2x4 gen() 7840 MB/s [ 7.480032] raid6: sse2x4 xor() 5775 MB/s [ 7.481391] raid6: using algorithm sse2x4 gen() 7840 MB/s [ 7.482752] raid6: .... xor() 5775 MB/s, rmw enabled [ 7.484107] raid6: using ssse3x2 recovery algorithm [ 7.486853] xor: measuring software checksum speed [ 7.528007] prefetch64-sse: 10567.000 MB/sec [ 7.568007] generic_sse: 9387.000 MB/sec [ 7.569354] xor: using function: prefetch64-sse (10567.000 MB/sec) [ 7.571970] async_tx: api initialized (async) [ 7.632434] Btrfs loaded, crc32c=crc32c-generic [ 8.147893] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 9.115239] random: crng init done [ 9.825908] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.957448] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 9.980114] systemd[1]: Detected architecture x86-64. [ 10.051245] systemd[1]: Set hostname to . [ 12.060437] systemd[1]: Created slice System Slice. [ 12.064242] systemd[1]: Listening on LVM2 metadata daemon socket. [ 12.067928] systemd[1]: Listening on Journal Socket. [ 12.072599] systemd[1]: Mounting POSIX Message Queue File System... [ 12.077091] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 12.080689] systemd[1]: Listening on Journal Audit Socket. [ 12.085456] systemd[1]: Mounting Kernel Debug File System... [ 12.845606] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 13.094628] Loading iSCSI transport class v2.0-870. [ 13.148780] systemd-journald[390]: Received request to flush runtime journal from PID 1 [ 13.466435] iscsi: registered transport (tcp) [ 13.683486] iscsi: registered transport (iser) [ 15.557790] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.896406] parport_pc 00:06: reported by Plug and Play ACPI [ 15.896474] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE] [ 16.364967] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\PMIO) (20170831/utaddress-247) [ 16.364975] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 16.364978] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20170831/utaddress-247) [ 16.364982] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 16.364984] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20170831/utaddress-247) [ 16.364988] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 16.364988] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 16.454423] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 16.459280] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 16.704030] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 16.704033] cfg80211: failed to load regulatory.db [ 17.144568] sky2 0000:04:00.0 enp4s0: enabling interface [ 17.144678] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready [ 17.425904] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree: [ 17.425905] iwl4965: Copyright(c) 2003-2011 Intel Corporation [ 17.425970] iwl4965 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control [ 17.425981] iwl4965 0000:06:00.0: enabling device (0104 -> 0106) [ 17.426122] iwl4965 0000:06:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 [ 17.463395] iwl4965 0000:06:00.0: device EEPROM VER=0x36, CALIB=0x5 [ 17.464172] iwl4965 0000:06:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 17.482264] snd_hda_intel 0000:00:1b.0: enabling device (0104 -> 0106) [ 17.604255] iwl4965 0000:06:00.0: loaded firmware version 228.61.2.24 [ 17.740508] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs' [ 17.855977] snd_hda_codec_realtek hdaudioC0D0: ALC262: SKU not ready 0x598301f0 [ 17.856391] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line [ 17.856394] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 17.856396] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 17.856398] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 17.856399] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 17.856401] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19 [ 17.856403] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x1a [ 17.856405] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 17.864655] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 17.864727] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 17.864792] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 17.864853] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 18.003258] hso: /build/linux-LL9XfP/linux-4.15.0/drivers/net/usb/hso.c: Option Wireless [ 18.030950] usbcore: registered new interface driver hso [ 18.644515] intel_powerclamp: No package C-state available [ 18.688243] intel_powerclamp: No package C-state available [ 19.377399] audit: type=1400 audit(1521852437.128:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=530 comm="apparmor_parser" [ 19.377403] audit: type=1400 audit(1521852437.128:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=530 comm="apparmor_parser" [ 19.377406] audit: type=1400 audit(1521852437.128:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=530 comm="apparmor_parser" [ 19.377409] audit: type=1400 audit(1521852437.128:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=530 comm="apparmor_parser" [ 19.442309] audit: type=1400 audit(1521852437.192:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=549 comm="apparmor_parser" [ 19.471235] audit: type=1400 audit(1521852437.220:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=531 comm="apparmor_parser" [ 19.471238] audit: type=1400 audit(1521852437.220:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=531 comm="apparmor_parser" [ 19.471241] audit: type=1400 audit(1521852437.220:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=531 comm="apparmor_parser" [ 19.471243] audit: type=1400 audit(1521852437.220:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=531 comm="apparmor_parser" [ 19.528040] audit: type=1400 audit(1521852437.276:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=550 comm="apparmor_parser" [ 20.150049] sky2 0000:04:00.0 enp4s0: Link is up at 1000 Mbps, full duplex, flow control both [ 20.150068] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready [ 20.232847] ppdev: user-space parallel port driver [ 20.341675] iwl4965 0000:06:00.0 wlp6s0: renamed from wlan0 [ 20.978037] Adding 4182012k swap on /dev/sda7. Priority:-2 extents:1 across:4182012k FS [ 21.180716] new mount options do not match the existing superblock, will be ignored [ 28.869361] atkbd serio0: Unknown key pressed (translated set 2, code 0x83 on isa0060/serio0). [ 28.869368] atkbd serio0: Use 'setkeycodes e003 ' to make it known. [ 29.172066] usb 1-3: new high-speed USB device number 3 using ehci-pci [ 29.417366] usb 1-3: New USB device found, idVendor=05c8, idProduct=0103 [ 29.417373] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 29.417378] usb 1-3: Product: FO13FF-65-1 PC-CAM [ 29.417384] usb 1-3: Manufacturer: Foxlink [ 29.417389] usb 1-3: SerialNumber: 1.09 [ 29.476448] media: Linux media interface: v0.10 [ 29.500983] Linux video capture interface: v2.00 [ 29.543508] uvcvideo: Found UVC 1.00 device FO13FF-65-1 PC-CAM (05c8:0103) [ 29.547083] uvcvideo 1-3:1.0: Entity type for entity Extension 5 was not initialized! [ 29.547086] uvcvideo 1-3:1.0: Entity type for entity Extension 4 was not initialized! [ 29.547088] uvcvideo 1-3:1.0: Entity type for entity Processing 3 was not initialized! [ 29.547091] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized! [ 29.547205] input: FO13FF-65-1 PC-CAM: FO13FF-65-1 as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input18 [ 29.547301] usbcore: registered new interface driver uvcvideo [ 29.547302] USB Video Class driver (1.1.1) [ 117.345390] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 581.848795] PM: suspend entry (deep) [ 581.848798] PM: Syncing filesystems ... done. [ 582.057871] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 582.059093] OOM killer disabled. [ 582.059094] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 582.060077] Suspending console(s) (use no_console_suspend to debug) [ 582.072063] sd 3:0:0:0: [sda] Synchronizing SCSI cache [ 582.100200] sd 3:0:0:0: [sda] Stopping disk [ 582.103091] parport_pc 00:06: disabled [ 582.103438] serial 00:05: disabled [ 582.668825] ACPI: Preparing to enter system sleep state S3 [ 582.669017] ACPI: EC: event blocked [ 582.669017] ACPI: EC: EC stopped [ 582.669018] PM: Saving platform NVS memory [ 582.669105] Disabling non-boot CPUs ... [ 582.684362] IRQ 24: no longer affine to CPU1 [ 582.685370] smpboot: CPU 1 is now offline [ 582.685400] ACPI: Low-level resume complete [ 582.685400] ACPI: EC: EC started [ 582.685400] PM: Restoring platform NVS memory [ 582.685400] Force enabled HPET at resume [ 582.685400] Enabling non-boot CPUs ... [ 582.685400] x86: Booting SMP configuration: [ 582.685400] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 582.687996] cache: parent cpu1 should not be sleeping [ 582.688484] CPU1 is up [ 582.692604] ACPI: Waking up from system sleep state S3 [ 582.852062] pci_raw_set_power_state: 5 callbacks suppressed [ 582.852065] sky2 0000:04:00.0: Refused to change power state, currently in D3 [ 582.868090] usb usb3: root hub lost power or was reset [ 582.868159] usb usb4: root hub lost power or was reset [ 582.868357] usb usb5: root hub lost power or was reset [ 582.868423] usb usb6: root hub lost power or was reset [ 582.868487] usb usb7: root hub lost power or was reset [ 582.871497] iwl4965 0000:06:00.0: RF_KILL bit toggled to disable radio. [ 582.873241] sd 3:0:0:0: [sda] Starting disk [ 582.904076] ACPI: EC: event unblocked [ 582.905145] serial 00:05: activated [ 582.906237] parport_pc 00:06: activated [ 583.116068] usb 1-2: reset high-speed USB device number 2 using ehci-pci [ 583.186926] ata5: SATA link down (SStatus 0 SControl 300) [ 583.186941] ata4: SATA link down (SStatus 0 SControl 300) [ 583.400061] usb 1-3: reset high-speed USB device number 3 using ehci-pci [ 584.204079] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 584.260933] ata3.00: unexpected _GTF length (8) [ 584.276158] ata3.00: unexpected _GTF length (8) [ 584.276382] ata3.00: configured for UDMA/133 [ 585.793486] OOM killer enabled. [ 585.793487] Restarting tasks ... done. [ 585.840230] usb 2-5: USB disconnect, device number 2 [ 586.144733] video LNXVIDEO:00: Restoring backlight state [ 586.144835] PM: suspend exit [ 586.252056] usb 2-5: new high-speed USB device number 3 using ehci-pci [ 586.419279] usb 2-5: New USB device found, idVendor=0af0, idProduct=7601 [ 586.419287] usb 2-5: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 586.419295] usb 2-5: Product: Globetrotter HSUPA Modem [ 586.419301] usb 2-5: Manufacturer: Option N.V. [ 826.757003] PM: suspend entry (deep) [ 826.757007] PM: Syncing filesystems ... done. [ 827.047381] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 827.048694] OOM killer disabled. [ 827.048694] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 827.049863] Suspending console(s) (use no_console_suspend to debug) [ 827.068114] sd 3:0:0:0: [sda] Synchronizing SCSI cache [ 827.091887] parport_pc 00:06: disabled [ 827.092213] serial 00:05: disabled [ 827.102904] sd 3:0:0:0: [sda] Stopping disk [ 827.528809] ACPI: Preparing to enter system sleep state S3 [ 827.528997] ACPI: EC: event blocked [ 827.528997] ACPI: EC: EC stopped [ 827.528998] PM: Saving platform NVS memory [ 827.529082] Disabling non-boot CPUs ... [ 827.544298] IRQ 25: no longer affine to CPU1 [ 827.545312] smpboot: CPU 1 is now offline [ 827.545488] ACPI: Low-level resume complete [ 827.545488] ACPI: EC: EC started [ 827.545488] PM: Restoring platform NVS memory [ 827.545488] Force enabled HPET at resume [ 827.545488] Enabling non-boot CPUs ... [ 827.545488] x86: Booting SMP configuration: [ 827.545488] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 827.547608] cache: parent cpu1 should not be sleeping [ 827.547891] CPU1 is up [ 827.550942] ACPI: Waking up from system sleep state S3 [ 827.552174] sky2 0000:04:00.0: Refused to change power state, currently in D3 [ 827.613294] usb usb3: root hub lost power or was reset [ 827.613336] usb usb4: root hub lost power or was reset [ 827.613507] usb usb5: root hub lost power or was reset [ 827.613576] usb usb6: root hub lost power or was reset [ 827.613641] usb usb7: root hub lost power or was reset [ 827.613729] sky2 0000:04:00.0: ignoring stuck error report bit [ 827.613748] sky2 0000:04:00.0: enp4s0: phy I/O error [ 827.613750] sky2 0000:04:00.0: enp4s0: phy I/O error [ 827.613752] sky2 0000:04:00.0: enp4s0: phy I/O error [ 827.613754] sky2 0000:04:00.0: enp4s0: phy I/O error [ 827.613756] sky2 0000:04:00.0: enp4s0: phy I/O error [ 827.613759] sky2 0000:04:00.0: enp4s0: phy I/O error [ 827.613761] sky2 0000:04:00.0: enp4s0: phy I/O error [ 827.613763] sky2 0000:04:00.0: enp4s0: phy I/O error [ 827.613765] sky2 0000:04:00.0: enp4s0: phy I/O error [ 827.613767] sky2 0000:04:00.0: enp4s0: phy I/O error [ 827.613769] sky2 0000:04:00.0: enp4s0: phy I/O error [ 827.613772] sky2 0000:04:00.0: enp4s0: phy I/O error [ 827.613774] sky2 0000:04:00.0: enp4s0: phy I/O error [ 827.613776] sky2 0000:04:00.0: enp4s0: phy I/O error [ 827.613778] sky2 0000:04:00.0: enp4s0: phy I/O error [ 827.613780] sky2 0000:04:00.0: enp4s0: phy I/O error [ 827.613782] sky2 0000:04:00.0: enp4s0: phy I/O error [ 827.613897] iwl4965 0000:06:00.0: RF_KILL bit toggled to disable radio. [ 827.615365] sd 3:0:0:0: [sda] Starting disk [ 827.644114] ACPI: EC: event unblocked [ 827.645151] serial 00:05: activated [ 827.646331] parport_pc 00:06: activated [ 827.860045] usb 1-2: reset high-speed USB device number 2 using ehci-pci [ 827.931003] ata5: SATA link down (SStatus 0 SControl 300) [ 827.931020] ata4: SATA link down (SStatus 0 SControl 300) [ 828.148036] usb 1-3: reset high-speed USB device number 3 using ehci-pci [ 829.132050] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 829.141571] ata3.00: unexpected _GTF length (8) [ 829.155735] ata3.00: unexpected _GTF length (8) [ 829.156010] ata3.00: configured for UDMA/133 [ 830.553981] OOM killer enabled. [ 830.553982] Restarting tasks ... [ 830.554108] usb 2-5: USB disconnect, device number 3 [ 830.555105] done. [ 831.056716] video LNXVIDEO:00: Restoring backlight state [ 831.056818] PM: suspend exit [ 831.100043] usb 2-5: new high-speed USB device number 4 using ehci-pci [ 831.267201] usb 2-5: New USB device found, idVendor=0af0, idProduct=7601 [ 831.267209] usb 2-5: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 831.267215] usb 2-5: Product: Globetrotter HSUPA Modem [ 831.267220] usb 2-5: Manufacturer: Option N.V. [ 1235.299545] PM: suspend entry (deep) [ 1235.299547] PM: Syncing filesystems ... done. [ 1235.357658] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 1235.358922] OOM killer disabled. [ 1235.358923] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1235.360124] Suspending console(s) (use no_console_suspend to debug) [ 1235.380243] sd 3:0:0:0: [sda] Synchronizing SCSI cache [ 1235.380459] sd 3:0:0:0: [sda] Stopping disk [ 1235.402480] parport_pc 00:06: disabled [ 1235.403057] serial 00:05: disabled [ 1235.403333] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.403337] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.403342] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.403346] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.403351] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.403355] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.403359] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.403363] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.403368] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.829511] ACPI: Preparing to enter system sleep state S3 [ 1235.829827] ACPI: EC: event blocked [ 1235.829828] ACPI: EC: EC stopped [ 1235.829829] PM: Saving platform NVS memory [ 1235.829944] Disabling non-boot CPUs ... [ 1235.845521] smpboot: CPU 1 is now offline [ 1235.845756] ACPI: Low-level resume complete [ 1235.845756] ACPI: EC: EC started [ 1235.845756] PM: Restoring platform NVS memory [ 1235.845756] Force enabled HPET at resume [ 1235.845756] Enabling non-boot CPUs ... [ 1235.845756] x86: Booting SMP configuration: [ 1235.845756] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 1235.847821] cache: parent cpu1 should not be sleeping [ 1235.848170] CPU1 is up [ 1235.851193] ACPI: Waking up from system sleep state S3 [ 1235.852466] sky2 0000:04:00.0: Refused to change power state, currently in D3 [ 1235.913621] usb usb3: root hub lost power or was reset [ 1235.913691] usb usb4: root hub lost power or was reset [ 1235.916088] usb usb5: root hub lost power or was reset [ 1235.916155] usb usb6: root hub lost power or was reset [ 1235.916218] usb usb7: root hub lost power or was reset [ 1235.916303] sky2 0000:04:00.0: ignoring stuck error report bit [ 1235.916321] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.916323] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.916326] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.916328] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.916330] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.916332] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.916335] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.916337] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.916339] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.916341] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.916343] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.916345] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.916347] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.916349] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.916351] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.916353] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.916356] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1235.916628] iwl4965 0000:06:00.0: RF_KILL bit toggled to disable radio. [ 1235.920354] sd 3:0:0:0: [sda] Starting disk [ 1235.944086] ACPI: button: The lid device is not compliant to SW_LID. [ 1235.944110] ACPI: EC: event unblocked [ 1235.945148] serial 00:05: activated [ 1235.946327] parport_pc 00:06: activated [ 1236.160049] usb 1-2: reset high-speed USB device number 2 using ehci-pci [ 1236.234958] ata4: SATA link down (SStatus 0 SControl 300) [ 1236.234974] ata5: SATA link down (SStatus 0 SControl 300) [ 1236.448056] usb 1-3: reset high-speed USB device number 3 using ehci-pci [ 1237.372065] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1237.390654] ata3.00: unexpected _GTF length (8) [ 1237.405651] ata3.00: unexpected _GTF length (8) [ 1237.405902] ata3.00: configured for UDMA/133 [ 1238.866004] OOM killer enabled. [ 1238.866005] Restarting tasks ... done. [ 1238.872072] usb 2-5: USB disconnect, device number 4 [ 1239.404464] video LNXVIDEO:00: Restoring backlight state [ 1239.404570] PM: suspend exit [ 1239.432028] usb 2-5: new high-speed USB device number 5 using ehci-pci [ 1239.599176] usb 2-5: New USB device found, idVendor=0af0, idProduct=7601 [ 1239.599188] usb 2-5: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 1239.599193] usb 2-5: Product: Globetrotter HSUPA Modem [ 1239.599199] usb 2-5: Manufacturer: Option N.V. [ 1416.319875] sky2 0000:04:00.0 enp4s0: disabling interface [ 1416.319910] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1416.320941] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1416.321975] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1416.322976] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1416.323973] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1416.324588] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1416.325104] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1416.325621] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1416.326135] sky2 0000:04:00.0: enp4s0: phy I/O error [ 1421.781480] sky2: driver version 1.30 [ 1421.781533] sky2 0000:04:00.0: enabling device (0000 -> 0003) [ 1421.781667] sky2 0000:04:00.0: unsupported chip type 0xff [ 1421.782292] sky2: probe of 0000:04:00.0 failed with error -95 [ 1491.268088] usb 2-3: new high-speed USB device number 6 using ehci-pci [ 1491.437248] usb 2-3: New USB device found, idVendor=0b95, idProduct=772b [ 1491.437255] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1491.437261] usb 2-3: Product: AX88772B [ 1491.437266] usb 2-3: Manufacturer: ASIX Elec. Corp. [ 1491.437273] usb 2-3: SerialNumber: 000001 [ 1491.929839] asix 2-3:1.0 eth0: register 'asix' at usb-0000:00:1d.7-3, ASIX AX88772B USB 2.0 Ethernet, 00:60:6e:42:48:b1 [ 1491.929941] usbcore: registered new interface driver asix [ 1491.948512] asix 2-3:1.0 enx00606e4248b1: renamed from eth0 [ 1554.172035] IPv6: ADDRCONF(NETDEV_UP): enx00606e4248b1: link is not ready [ 1554.347972] IPv6: ADDRCONF(NETDEV_CHANGE): enx00606e4248b1: link becomes ready [ 1554.351704] asix 2-3:1.0 enx00606e4248b1: link up, 100Mbps, full-duplex, lpa 0xC5E1