[ 0.000000] microcode: microcode updated early to revision 0x1f, date = 2018-02-07 [ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x4ef with crng_init=0 [ 0.000000] Linux version 4.13.0-38-generic (buildd@lgw01-amd64-042) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3.2)) #43-Ubuntu SMP Wed Mar 14 15:20:44 UTC 2018 (Ubuntu 4.13.0-38.43-generic 4.13.16) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-38-generic.efi.signed root=UUID=8496cc43-27ca-48ea-ad12-21119c1e7263 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009cfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000cf97dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf97e000-0x00000000cfb7ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cfb80000-0x00000000d6a0afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d6a0b000-0x00000000d6c0afff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000d6c0b000-0x00000000dae9efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e5fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000041e600000-0x000000041effffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by Lenovo [ 0.000000] efi: ACPI 2.0=0xdaffe014 ACPI=0xdaffe000 SMBIOS=0xdae9e000 [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 2349NL4/2349NL4, BIOS G1ETB4WW (2.74 ) 09/25/2017 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x41e600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FE0000000 write-back [ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 6 base 100000000 mask F00000000 write-back [ 0.000000] 7 base 200000000 mask E00000000 write-back [ 0.000000] 8 base 400000000 mask FE0000000 write-back [ 0.000000] 9 base 41F000000 mask FFF000000 uncachable [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff95a180096000] 96000 size 24576 [ 0.000000] BRK [0x315f2e000, 0x315f2efff] PGTABLE [ 0.000000] BRK [0x315f2f000, 0x315f2ffff] PGTABLE [ 0.000000] BRK [0x315f30000, 0x315f30fff] PGTABLE [ 0.000000] BRK [0x315f31000, 0x315f31fff] PGTABLE [ 0.000000] BRK [0x315f32000, 0x315f32fff] PGTABLE [ 0.000000] BRK [0x315f33000, 0x315f33fff] PGTABLE [ 0.000000] BRK [0x315f34000, 0x315f34fff] PGTABLE [ 0.000000] BRK [0x315f35000, 0x315f35fff] PGTABLE [ 0.000000] BRK [0x315f36000, 0x315f36fff] PGTABLE [ 0.000000] BRK [0x315f37000, 0x315f37fff] PGTABLE [ 0.000000] BRK [0x315f38000, 0x315f38fff] PGTABLE [ 0.000000] BRK [0x315f39000, 0x315f39fff] PGTABLE [ 0.000000] Secure boot could not be determined [ 0.000000] RAMDISK: [mem 0x319dd000-0x34ce5fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000DAFFE014 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x00000000DAFFE170 0000CC (v01 LENOVO TP-G1 00002740 PTL 00000002) [ 0.000000] ACPI: FACP 0x00000000DAFE6000 00010C (v05 LENOVO TP-G1 00002740 PTL 00000002) [ 0.000000] ACPI: DSDT 0x00000000DAFE8000 0103F7 (v01 LENOVO TP-G1 00002740 INTL 20061109) [ 0.000000] ACPI: FACS 0x00000000DAF5A000 000040 [ 0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LENOVO TP-G1 00002740 PTL 00000001) [ 0.000000] ACPI: TCPA 0x00000000DAFFC000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.000000] ACPI: SSDT 0x00000000DAFFB000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000DAFFA000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000DAFF9000 000797 (v01 LENOVO SataAhci 00001000 INTL 20061109) [ 0.000000] ACPI: HPET 0x00000000DAFE4000 000038 (v01 LENOVO TP-G1 00002740 PTL 00000002) [ 0.000000] ACPI: APIC 0x00000000DAFE3000 000098 (v01 LENOVO TP-G1 00002740 PTL 00000002) [ 0.000000] ACPI: MCFG 0x00000000DAFE2000 00003C (v01 LENOVO TP-G1 00002740 PTL 00000002) [ 0.000000] ACPI: ECDT 0x00000000DAFE1000 000052 (v01 LENOVO TP-G1 00002740 PTL 00000002) [ 0.000000] ACPI: FPDT 0x00000000DAFE0000 000064 (v01 LENOVO TP-G1 00002740 PTL 00000002) [ 0.000000] ACPI: ASF! 0x00000000DAFE7000 0000A5 (v32 LENOVO TP-G1 00002740 PTL 00000002) [ 0.000000] ACPI: UEFI 0x00000000DAFDF000 00003E (v01 LENOVO TP-G1 00002740 PTL 00000002) [ 0.000000] ACPI: UEFI 0x00000000DAFDE000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: POAT 0x00000000DAFDD000 000055 (v03 LENOVO TP-G1 00002740 PTL 00000002) [ 0.000000] ACPI: SSDT 0x00000000DAFDC000 000C51 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000DAFDB000 000A83 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: DMAR 0x00000000DAFDA000 0000B8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: UEFI 0x00000000DAFD9000 000292 (v01 LENOVO TP-G1 00002740 PTL 00000002) [ 0.000000] ACPI: DBG2 0x00000000DAFD8000 0000E9 (v00 LENOVO TP-G1 00002740 PTL 00000002) [ 0.000000] ACPI: BGRT 0x00000000DAFD7000 000038 (v00 LENOVO TP-G1 00002740 PTL 00000002) [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T430 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041e5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x41e5c8000-0x41e5f2fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000041e5fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff] [ 0.000000] node 0: [mem 0x000000000009d000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff] [ 0.000000] node 0: [mem 0x0000000040005000-0x00000000cf97dfff] [ 0.000000] node 0: [mem 0x00000000cfb80000-0x00000000d6a0afff] [ 0.000000] node 0: [mem 0x00000000dafff000-0x00000000daffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000041e5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041e5fffff] [ 0.000000] On node 0 totalpages: 4148133 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 24 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13657 pages used for memmap [ 0.000000] DMA32 zone: 873993 pages, LIFO batch:31 [ 0.000000] Normal zone: 51096 pages used for memmap [ 0.000000] Normal zone: 3270144 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000dba00000-0x00000000df9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] efi_bgrt: Ignoring BGRT: invalid version 0 (expected 1) [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000bffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf97e000-0xcfb7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd6a0b000-0xd6c0afff] [ 0.000000] PM: Registered nosave memory: [mem 0xd6c0b000-0xdae9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf80f7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf80f7fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 45 pages/cpu @ffff95a59e200000 s146520 r8192 d29608 u262144 [ 0.000000] pcpu-alloc: s146520 r8192 d29608 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4083292 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-38-generic.efi.signed root=UUID=8496cc43-27ca-48ea-ad12-21119c1e7263 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16109796K/16592532K available (12300K kernel code, 2482K rwdata, 4000K rodata, 2376K init, 2372K bss, 482736K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 37838 entries in 148 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2594.111 MHz processor [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.22 BogoMIPS (lpj=10376444) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] ACPI: Core revision 20170531 [ 0.015006] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.016171] Security Framework initialized [ 0.016173] Yama: becoming mindful. [ 0.016194] AppArmor: AppArmor initialized [ 0.022016] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.023291] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.023342] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.023386] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.023582] CPU: Physical Processor ID: 0 [ 0.023583] CPU: Processor Core ID: 0 [ 0.023588] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.023588] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.023590] FEATURE SPEC_CTRL Present [ 0.023592] mce: CPU supports 7 MCE banks [ 0.023600] CPU0: Thermal monitoring enabled (TM1) [ 0.023607] process: using mwait in idle threads [ 0.023610] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.023611] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.023613] Spectre V2 mitigation: Mitigation: Full generic retpoline [ 0.023614] Spectre V2 mitigation: Speculation control IBPB supported IBRS supported [ 0.023614] Spectre V2 mitigation: Retpoline compiled kernel. Defaulting IBRS to disabled [ 0.023729] Freeing SMP alternatives memory: 36K [ 0.027391] smpboot: Max logical packages: 4 [ 0.027402] DMAR: Host address width 36 [ 0.027404] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.027409] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.027410] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.027413] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.027413] DMAR: RMRR base: 0x000000da475000 end: 0x000000da48bfff [ 0.027415] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff [ 0.027417] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.027418] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.027419] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.027701] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.027703] x2apic enabled [ 0.027708] Switched APIC routing to cluster x2apic. [ 0.028000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.063868] TSC deadline timer enabled [ 0.063871] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.063941] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.063962] ... version: 3 [ 0.063962] ... bit width: 48 [ 0.063963] ... generic registers: 4 [ 0.063964] ... value mask: 0000ffffffffffff [ 0.063964] ... max period: 00007fffffffffff [ 0.063965] ... fixed-purpose events: 3 [ 0.063965] ... event mask: 000000070000000f [ 0.064000] Hierarchical SRCU implementation. [ 0.064000] smp: Bringing up secondary CPUs ... [ 0.064000] x86: Booting SMP configuration: [ 0.064000] .... node #0, CPUs: #1 [ 0.064000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.064000] #2 #3 [ 0.068053] smp: Brought up 1 node, 4 CPUs [ 0.068053] smpboot: Total of 4 processors activated (20752.88 BogoMIPS) [ 0.070883] devtmpfs: initialized [ 0.070883] x86/mm: Memory block size: 128MB [ 0.072711] evm: security.selinux [ 0.072712] evm: security.SMACK64 [ 0.072712] evm: security.SMACK64EXEC [ 0.072713] evm: security.SMACK64TRANSMUTE [ 0.072713] evm: security.SMACK64MMAP [ 0.072714] evm: security.ima [ 0.072714] evm: security.capability [ 0.072727] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes) [ 0.072727] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.072727] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.072727] pinctrl core: initialized pinctrl subsystem [ 0.072727] RTC time: 8:24:37, date: 04/04/18 [ 0.072727] NET: Registered protocol family 16 [ 0.072727] cpuidle: using governor ladder [ 0.072727] cpuidle: using governor menu [ 0.072727] PCCT header not found. [ 0.072727] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.072727] ACPI: bus type PCI registered [ 0.072727] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.072727] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.072727] PCI: not using MMCONFIG [ 0.072727] PCI: Using configuration type 1 for base access [ 0.072727] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.073131] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.073131] ACPI: Added _OSI(Module Device) [ 0.073131] ACPI: Added _OSI(Processor Device) [ 0.073131] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.073131] ACPI: Added _OSI(Processor Aggregator Device) [ 0.073131] ACPI: Deleted _OSI(Windows 2012) [ 0.073131] ACPI: EC: EC started [ 0.073131] ACPI: EC: interrupt blocked [ 0.073131] ACPI: \: Used as first EC [ 0.073131] ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.073131] ACPI: \: Used as boot ECDT EC to handle transactions [ 0.078565] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.082528] ACPI: Dynamic OEM Table Load: [ 0.082537] ACPI: SSDT 0xFFFF95A58B45E000 000A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.082841] ACPI: Dynamic OEM Table Load: [ 0.082847] ACPI: SSDT 0xFFFF95A58B571800 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.083076] ACPI: Dynamic OEM Table Load: [ 0.083081] ACPI: SSDT 0xFFFF95A58B5A9600 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.083725] ACPI: Interpreter enabled [ 0.083743] ACPI: (supports S0 S3 S4 S5) [ 0.083744] ACPI: Using IOAPIC for interrupt routing [ 0.083762] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.084120] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.084128] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.084353] ACPI: GPE 0x16 active on init [ 0.084363] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.087200] ACPI: Power Resource [PUBS] (on) [ 0.087781] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) [ 0.088630] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2) [ 0.091006] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.091074] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.091137] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.091200] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.091263] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.091326] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.091388] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.091450] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.091535] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.091539] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.091638] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability] [ 0.091681] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.091683] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] [ 0.091685] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.091686] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.091838] PCI host bridge to bus 0000:00 [ 0.091840] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.091842] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.091843] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.091844] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.091846] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.091847] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.091848] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.091849] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.091852] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.091853] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.091855] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.091856] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.091857] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.091858] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.091860] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.091861] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window] [ 0.091862] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] [ 0.091864] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.091872] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.091949] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 [ 0.091960] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.091966] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.091971] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 0.092060] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.092085] pci 0000:00:14.0: reg 0x10: [mem 0xf1520000-0xf152ffff 64bit] [ 0.092155] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.092216] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.092242] pci 0000:00:16.0: reg 0x10: [mem 0xf1535000-0xf153500f 64bit] [ 0.092316] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.092378] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.092398] pci 0000:00:19.0: reg 0x10: [mem 0xf1500000-0xf151ffff] [ 0.092406] pci 0000:00:19.0: reg 0x14: [mem 0xf153b000-0xf153bfff] [ 0.092415] pci 0000:00:19.0: reg 0x18: [io 0x5080-0x509f] [ 0.092475] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.092533] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.092555] pci 0000:00:1a.0: reg 0x10: [mem 0xf153a000-0xf153a3ff] [ 0.092638] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.092700] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.092722] pci 0000:00:1b.0: reg 0x10: [mem 0xf1530000-0xf1533fff 64bit] [ 0.092797] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.092868] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.093007] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.093085] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.093223] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.093303] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.093326] pci 0000:00:1d.0: reg 0x10: [mem 0xf1539000-0xf15393ff] [ 0.093410] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.093471] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 [ 0.093630] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.093649] pci 0000:00:1f.2: reg 0x10: [io 0x50a8-0x50af] [ 0.093657] pci 0000:00:1f.2: reg 0x14: [io 0x50b4-0x50b7] [ 0.093664] pci 0000:00:1f.2: reg 0x18: [io 0x50a0-0x50a7] [ 0.093672] pci 0000:00:1f.2: reg 0x1c: [io 0x50b0-0x50b3] [ 0.093680] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f] [ 0.093688] pci 0000:00:1f.2: reg 0x24: [mem 0xf1538000-0xf15387ff] [ 0.093729] pci 0000:00:1f.2: PME# supported from D3hot [ 0.093783] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.093803] pci 0000:00:1f.3: reg 0x10: [mem 0xf1534000-0xf15340ff 64bit] [ 0.093823] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.094081] pci 0000:02:00.0: [1180:e822] type 00 class 0x088001 [ 0.094109] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. [ 0.094147] pci 0000:02:00.0: reg 0x10: [mem 0xf0d00000-0xf0d000ff] [ 0.094373] pci 0000:02:00.0: supports D1 D2 [ 0.094374] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.104248] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.104252] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.104256] pci 0000:00:1c.0: bridge window [mem 0xf0d00000-0xf14fffff] [ 0.104265] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.104471] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000 [ 0.104713] pci 0000:03:00.0: reg 0x10: [mem 0xf0c00000-0xf0c01fff 64bit] [ 0.105490] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.116151] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.116160] pci 0000:00:1c.1: bridge window [mem 0xf0c00000-0xf0cfffff] [ 0.117128] ACPI: EC: interrupt unblocked [ 0.117137] ACPI: EC: event unblocked [ 0.117143] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.117144] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events [ 0.117334] SCSI subsystem initialized [ 0.117366] libata version 3.00 loaded. [ 0.117366] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none [ 0.117366] pci 0000:00:02.0: vgaarb: setting as boot device [ 0.117366] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.117366] vgaarb: loaded [ 0.117366] ACPI: bus type USB registered [ 0.117366] usbcore: registered new interface driver usbfs [ 0.117366] usbcore: registered new interface driver hub [ 0.117366] usbcore: registered new device driver usb [ 0.117366] EDAC MC: Ver: 3.0.0 [ 0.117366] Registered efivars operations [ 0.133088] PCI: Using ACPI for IRQ routing [ 0.133599] PCI: pci_cache_line_size set to 64 bytes [ 0.133995] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff] [ 0.133996] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.133997] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.133998] e820: reserve RAM buffer [mem 0xcf97e000-0xcfffffff] [ 0.133999] e820: reserve RAM buffer [mem 0xd6a0b000-0xd7ffffff] [ 0.134000] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.134001] e820: reserve RAM buffer [mem 0x41e600000-0x41fffffff] [ 0.134082] NetLabel: Initializing [ 0.134083] NetLabel: domain hash size = 128 [ 0.134083] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.134097] NetLabel: unlabeled traffic allowed by default [ 0.136051] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.136057] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.140002] clocksource: Switched to clocksource hpet [ 0.150104] VFS: Disk quotas dquot_6.6.0 [ 0.150125] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.150218] AppArmor: AppArmor Filesystem Enabled [ 0.150264] pnp: PnP ACPI init [ 0.150627] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.150629] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.150631] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved [ 0.150633] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.150634] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.150638] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.150725] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] [ 0.150743] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.150744] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.150746] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.150747] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.150749] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.150751] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved [ 0.150753] system 00:01: [mem 0xfffff000-0xffffffff] has been reserved [ 0.150754] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.150756] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.150757] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.150759] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.150760] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.150763] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.150809] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.150828] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.150845] pnp 00:04: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active) [ 0.150887] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) [ 0.151268] pnp: PnP ACPI: found 6 devices [ 0.157852] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.157886] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.157893] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.157899] pci 0000:00:1c.0: bridge window [mem 0xf0d00000-0xf14fffff] [ 0.157904] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.157913] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.157919] pci 0000:00:1c.1: bridge window [mem 0xf0c00000-0xf0cfffff] [ 0.157931] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.157933] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.157934] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.157936] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.157937] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.157938] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.157940] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.157941] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.157943] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.157944] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.157945] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.157947] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.157948] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.157950] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.157951] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.157952] pci_bus 0000:00: resource 19 [mem 0xdfa00000-0xfebfffff window] [ 0.157954] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed4bfff window] [ 0.157956] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.157957] pci_bus 0000:02: resource 1 [mem 0xf0d00000-0xf14fffff] [ 0.157958] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.157960] pci_bus 0000:03: resource 1 [mem 0xf0c00000-0xf0cfffff] [ 0.158045] NET: Registered protocol family 2 [ 0.158212] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.158405] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.158516] TCP: Hash tables configured (established 131072 bind 65536) [ 0.158554] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.158592] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.158663] NET: Registered protocol family 1 [ 0.158675] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.159329] PCI: CLS 64 bytes, default 64 [ 0.159370] Unpacking initramfs... [ 0.894426] Freeing initrd memory: 52260K [ 0.894483] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.894485] software IO TLB [mem 0xc95df000-0xcd5df000] (64MB) mapped at [ffff95a2495df000-ffff95a24d5defff] [ 0.894737] Scanning for low memory corruption every 60 seconds [ 0.895052] audit: initializing netlink subsys (disabled) [ 0.895093] audit: type=2000 audit(1522830277.895:1): state=initialized audit_enabled=0 res=1 [ 0.895401] Initialise system trusted keyrings [ 0.895409] Key type blacklist registered [ 0.895446] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.896492] zbud: loaded [ 0.896948] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.897088] fuse init (API version 7.26) [ 0.898612] Key type asymmetric registered [ 0.898614] Asymmetric key parser 'x509' registered [ 0.898648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.898685] io scheduler noop registered [ 0.898686] io scheduler deadline registered [ 0.898708] io scheduler cfq registered (default) [ 0.899157] efifb: probing for efifb [ 0.899169] efifb: framebuffer at 0xe0000000, using 8128k, total 8128k [ 0.899170] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.899171] efifb: scrolling: redraw [ 0.899172] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.899275] Console: switching to colour frame buffer device 240x67 [ 0.899304] fb0: EFI VGA frame buffer device [ 0.899310] intel_idle: MWAIT substates: 0x21120 [ 0.899311] intel_idle: v0.4.1 model 0x3A [ 0.899456] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.899739] ACPI: AC Adapter [AC] (on-line) [ 0.899896] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.900076] ACPI: Lid Switch [LID] [ 0.900109] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.900135] ACPI: Sleep Button [SLPB] [ 0.900175] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.900198] ACPI: Power Button [PWRF] [ 0.901050] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 0.901397] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.901398] ACPI: Thermal Zone [THM0] (52 C) [ 0.901426] GHES: HEST is not enabled! [ 0.901550] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.903099] Linux agpgart interface v0.103 [ 0.909214] ACPI: Battery Slot [BAT0] (battery present) [ 0.916106] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) [ 1.014410] loop: module loaded [ 1.014550] libphy: Fixed MDIO Bus: probed [ 1.014551] tun: Universal TUN/TAP device driver, 1.6 [ 1.014589] PPP generic driver version 2.4.2 [ 1.014627] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.014629] ehci-pci: EHCI PCI platform driver [ 1.014726] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.014732] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.014747] ehci-pci 0000:00:1a.0: debug port 2 [ 1.018666] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.018686] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf153a000 [ 1.032027] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.032067] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.032069] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.032070] usb usb1: Product: EHCI Host Controller [ 1.032072] usb usb1: Manufacturer: Linux 4.13.0-38-generic ehci_hcd [ 1.032073] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.032201] hub 1-0:1.0: USB hub found [ 1.032206] hub 1-0:1.0: 3 ports detected [ 1.032400] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.032404] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.032417] ehci-pci 0000:00:1d.0: debug port 2 [ 1.036302] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.036315] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf1539000 [ 1.052023] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.052056] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.052057] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.052058] usb usb2: Product: EHCI Host Controller [ 1.052060] usb usb2: Manufacturer: Linux 4.13.0-38-generic ehci_hcd [ 1.052061] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.052181] hub 2-0:1.0: USB hub found [ 1.052186] hub 2-0:1.0: 3 ports detected [ 1.052291] ehci-platform: EHCI generic platform driver [ 1.052300] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.052306] ohci-pci: OHCI PCI platform driver [ 1.052313] ohci-platform: OHCI generic platform driver [ 1.052318] uhci_hcd: USB Universal Host Controller Interface driver [ 1.052404] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.052408] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.053501] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930 [ 1.053506] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.053590] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.053592] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.053593] usb usb3: Product: xHCI Host Controller [ 1.053594] usb usb3: Manufacturer: Linux 4.13.0-38-generic xhci-hcd [ 1.053595] usb usb3: SerialNumber: 0000:00:14.0 [ 1.053709] hub 3-0:1.0: USB hub found [ 1.053720] hub 3-0:1.0: 4 ports detected [ 1.054047] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.054050] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.054082] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.054083] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.054085] usb usb4: Product: xHCI Host Controller [ 1.054086] usb usb4: Manufacturer: Linux 4.13.0-38-generic xhci-hcd [ 1.054087] usb usb4: SerialNumber: 0000:00:14.0 [ 1.054208] hub 4-0:1.0: USB hub found [ 1.054218] hub 4-0:1.0: 4 ports detected [ 1.054602] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.056449] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.056453] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.056615] mousedev: PS/2 mouse device common for all mice [ 1.056940] rtc_cmos 00:02: RTC can wake from S4 [ 1.057074] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.057106] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.057110] i2c /dev entries driver [ 1.057157] device-mapper: uevent: version 1.0.3 [ 1.057222] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.057227] intel_pstate: Intel P-state driver initializing [ 1.057385] ledtrig-cpu: registered to indicate activity on CPUs [ 1.057389] EFI Variables Facility v0.08 2004-May-17 [ 1.058406] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.074291] NET: Registered protocol family 10 [ 1.077460] Segment Routing with IPv6 [ 1.077476] NET: Registered protocol family 17 [ 1.077483] Key type dns_resolver registered [ 1.077688] RAS: Correctable Errors collector initialized. [ 1.077713] microcode: sig=0x306a9, pf=0x10, revision=0x1f [ 1.077768] microcode: Microcode Update Driver: v2.2. [ 1.077817] sched_clock: Marking stable (1077765270, 0)->(1096159189, -18393919) [ 1.077996] registered taskstats version 1 [ 1.078005] Loading compiled-in X.509 certificates [ 1.079978] Loaded X.509 cert 'Build time autogenerated kernel key: 4f0e518fe6e203292fbf35df5fac675bae7fc15a' [ 1.080338] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring [ 1.080356] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring [ 1.080370] Loaded UEFI:db cert 'Lenovo Ltd.: ThinkPad Product CA 2012: 838b1f54c1550463f45f98700640f11069265949' linked to secondary sys keyring [ 1.082248] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring [ 1.082486] zswap: loaded using pool lzo/zbud [ 1.085079] Key type big_key registered [ 1.085082] Key type trusted registered [ 1.086351] Key type encrypted registered [ 1.086354] AppArmor: AppArmor sha1 policy hashing enabled [ 1.308154] evm: HMAC attrs: 0x1 [ 1.308472] Magic number: 14:507:421 [ 1.308624] rtc_cmos 00:02: setting system clock to 2018-04-04 08:24:38 UTC (1522830278) [ 1.308749] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.308750] EDD information not available. [ 1.308789] PM: Hibernation image not present or could not be loaded. [ 1.310717] Freeing unused kernel memory: 2376K [ 1.310718] Write protecting the kernel read-only data: 18432k [ 1.311147] Freeing unused kernel memory: 2024K [ 1.311327] Freeing unused kernel memory: 96K [ 1.312910] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.312910] x86/mm: Checking user space page tables [ 1.314293] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.360027] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.380027] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.390269] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 1.390374] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 1.394409] pps_core: LinuxPPS API ver. 1 registered [ 1.394410] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.395988] PTP clock support registered [ 1.399072] sdhci: Secure Digital Host Controller Interface driver [ 1.399073] sdhci: Copyright(c) Pierre Ossman [ 1.400225] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7) [ 1.402138] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.402139] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.402296] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.405331] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA [ 1.506646] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.508885] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.508887] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.509373] hub 1-1:1.0: USB hub found [ 1.509595] hub 1-1:1.0: 6 ports detected [ 1.528401] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.528405] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.528772] hub 2-1:1.0: USB hub found [ 1.528847] hub 2-1:1.0: 8 ports detected [ 1.605535] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:09:43:d1 [ 1.605537] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.605579] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF [ 1.605605] ahci 0000:00:1f.2: version 3.0 [ 1.605800] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode [ 1.605804] ahci 0000:00:1f.2: flags: 64bit ncq ilck pm led clo pio slum part ems apst [ 1.606279] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 1.616519] scsi host0: ahci [ 1.616667] scsi host1: ahci [ 1.616806] scsi host2: ahci [ 1.616890] scsi host3: ahci [ 1.616972] scsi host4: ahci [ 1.617047] scsi host5: ahci [ 1.617089] ata1: SATA max UDMA/133 abar m2048@0xf1538000 port 0xf1538100 irq 28 [ 1.617092] ata2: SATA max UDMA/133 abar m2048@0xf1538000 port 0xf1538180 irq 28 [ 1.617093] ata3: DUMMY [ 1.617094] ata4: DUMMY [ 1.617095] ata5: DUMMY [ 1.617096] ata6: DUMMY [ 1.617176] i915 0000:00:02.0: enabling device (0006 -> 0007) [ 1.617502] [drm] Memory usable by graphics device = 2048M [ 1.617504] checking generic (e0000000 7f0000) vs hw (e0000000 10000000) [ 1.617505] fb: switching to inteldrmfb from EFI VGA [ 1.617532] Console: switching to colour dummy device 80x25 [ 1.617617] [drm] Replacing VGA console driver [ 1.623302] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.623303] [drm] Driver supports precise vblank timestamp query. [ 1.624356] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=mem [ 1.694947] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0 [ 1.695366] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 1.696365] acpi device:00: registered as cooling_device4 [ 1.696447] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 1.796025] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 1.816044] usb 2-1.8: new high-speed USB device number 3 using ehci-pci [ 1.911670] usb 1-1.1: New USB device found, idVendor=17ef, idProduct=1003 [ 1.911675] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.911678] usb 1-1.1: Product: Integrated Smart Card Reader [ 1.911681] usb 1-1.1: Manufacturer: Lenovo [ 1.916030] tsc: Refined TSC clocksource calibration: 2594.108 MHz [ 1.916049] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647e07037, max_idle_ns: 440795273876 ns [ 1.924729] usb 2-1.8: New USB device found, idVendor=17ef, idProduct=100a [ 1.924730] usb 2-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.925029] hub 2-1.8:1.0: USB hub found [ 1.925098] hub 2-1.8:1.0: 7 ports detected [ 1.931035] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.931064] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.932033] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.932038] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.932232] ata1.00: supports DRM functions and may not be fully accessible [ 1.932984] ata1.00: ATA-10: Crucial_CT1050MX300SSD1, M0CR040, max UDMA/133 [ 1.932985] ata1.00: 2051200368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.935189] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 1.935372] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 1.936033] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.936037] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.936270] ata1.00: supports DRM functions and may not be fully accessible [ 1.937253] ata2.00: ATAPI: HL-DT-ST DVDRAM GT80N, LT20, max UDMA/133 [ 1.938935] ata1.00: configured for UDMA/133 [ 1.939144] scsi 0:0:0:0: Direct-Access ATA Crucial_CT1050MX R040 PQ: 0 ANSI: 5 [ 1.941024] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 1.941224] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 1.943188] ata2.00: configured for UDMA/133 [ 1.968332] ata1.00: Enabling discard_zeroes_data [ 1.968426] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.968550] sd 0:0:0:0: [sda] 2051200368 512-byte logical blocks: (1.05 TB/978 GiB) [ 1.968577] sd 0:0:0:0: [sda] Write Protect is off [ 1.968578] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.968605] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.968893] ata1.00: Enabling discard_zeroes_data [ 1.969437] sda: sda1 < sda5 > sda2 sda3 [ 1.969636] ata1.00: Enabling discard_zeroes_data [ 1.970016] sd 0:0:0:0: [sda] supports TCG Opal [ 1.970017] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.970300] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT80N LT20 PQ: 0 ANSI: 5 [ 1.996018] usb 1-1.3: new full-speed USB device number 4 using ehci-pci [ 1.998245] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.998247] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.998387] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.998453] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.103314] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] [ 2.106158] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020 [ 2.106160] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.106162] usb 1-1.3: Product: Biometric Coprocessor [ 2.106163] usb 1-1.3: Manufacturer: Auth [ 2.160025] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262 [ 2.160031] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 2.184097] usb 1-1.6: new high-speed USB device number 5 using ehci-pci [ 2.199822] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 2.212098] usb 2-1.8.1: new full-speed USB device number 4 using ehci-pci [ 2.300684] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2db [ 2.300686] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.300688] usb 1-1.6: Product: Integrated Camera [ 2.300689] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. [ 2.328236] usb 2-1.8.1: New USB device found, idVendor=b58e, idProduct=9e84 [ 2.328238] usb 2-1.8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.328239] usb 2-1.8.1: Product: Yeti Stereo Microphone [ 2.328240] usb 2-1.8.1: Manufacturer: Blue Microphones [ 2.408014] usb 2-1.8.2: new full-speed USB device number 5 using ehci-pci [ 2.419699] fbcon: inteldrmfb (fb0) is primary device [ 2.419755] Console: switching to colour frame buffer device 240x67 [ 2.419781] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.537369] usb 2-1.8.2: New USB device found, idVendor=413c, idProduct=1003 [ 2.537374] usb 2-1.8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.537377] usb 2-1.8.2: Product: Dell USB Keyboard Hub [ 2.537380] usb 2-1.8.2: Manufacturer: Dell [ 2.538195] hub 2-1.8.2:1.0: USB hub found [ 2.538352] hub 2-1.8.2:1.0: 3 ports detected [ 2.583438] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 2.616019] usb 2-1.8.4: new low-speed USB device number 6 using ehci-pci [ 2.710827] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.737855] usb 2-1.8.4: New USB device found, idVendor=045e, idProduct=008c [ 2.737857] usb 2-1.8.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.737987] usb 2-1.8.4: Product: Microsoft Wireless Optical Mouse® 1.0A [ 2.737988] usb 2-1.8.4: Manufacturer: Microsoft [ 2.750320] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) [ 2.768144] systemd[1]: Detected architecture x86-64. [ 2.768373] systemd[1]: Set hostname to . [ 2.823591] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 2.833244] usb 2-1.8.2.1: new full-speed USB device number 7 using ehci-pci [ 2.880542] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 2.880643] systemd[1]: Listening on LVM2 poll daemon socket. [ 2.880685] systemd[1]: Listening on udev Kernel Socket. [ 2.880712] systemd[1]: Listening on LVM2 metadata daemon socket. [ 2.880748] systemd[1]: Listening on udev Control Socket. [ 2.880783] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.880803] systemd[1]: Reached target Libvirt guests shutdown. [ 2.903263] lp: driver loaded but no devices found [ 2.906928] ppdev: user-space parallel port driver [ 2.913526] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 2.942391] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.945722] usb 2-1.8.2.1: New USB device found, idVendor=413c, idProduct=2010 [ 2.945725] usb 2-1.8.2.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 2.945727] usb 2-1.8.2.1: Product: Dell USB Keyboard [ 2.945729] usb 2-1.8.2.1: Manufacturer: Dell [ 2.960234] clocksource: Switched to clocksource tsc [ 3.036115] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 [ 3.050606] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 3.111645] hidraw: raw HID events driver (C) Jiri Kosina [ 3.139121] usbcore: registered new interface driver usbhid [ 3.139122] usbhid: USB HID core driver [ 3.145937] input: Microsoft Microsoft Wireless Optical Mouse® 1.0A as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.4/2-1.8.4:1.0/0003:045E:008C.0001/input/input8 [ 3.146231] hid-generic 0003:045E:008C.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:1d.0-1.8.4/input0 [ 3.146486] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2.1/2-1.8.2.1:1.0/0003:413C:2010.0002/input/input9 [ 3.178583] systemd-journald[476]: Received request to flush runtime journal from PID 1 [ 3.208130] hid-generic 0003:413C:2010.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.8.2.1/input0 [ 3.208372] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2.1/2-1.8.2.1:1.1/0003:413C:2010.0003/input/input10 [ 3.269313] Adding 1762796k swap on /swapfile. Priority:-1 extents:5 across:1795564k SSFS [ 3.270430] hid-generic 0003:413C:2010.0003: input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.8.2.1/input1 [ 3.435190] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.483376] media: Linux media interface: v0.10 [ 3.505492] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPC.PMIO) (20170531/utaddress-247) [ 3.505499] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.505502] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170531/utaddress-247) [ 3.505506] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.505508] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170531/utaddress-247) [ 3.505511] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.505512] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170531/utaddress-247) [ 3.505516] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.505517] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 3.516667] Linux video capture interface: v2.00 [ 3.547672] Intel(R) Wireless WiFi driver for Linux [ 3.547674] Copyright(c) 2003- 2015 Intel Corporation [ 3.547897] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.563404] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 3.567742] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2db) [ 3.584129] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! [ 3.584132] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! [ 3.584134] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! [ 3.584135] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! [ 3.598737] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 3.598739] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 3.598740] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 3.598743] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 [ 3.601509] Non-volatile memory driver v1.3 [ 3.610741] iwlwifi 0000:03:00.0: reporting RF_KILL (radio disabled) [ 3.611137] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio. [ 3.624244] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input11 [ 3.627762] usbcore: registered new interface driver uvcvideo [ 3.627763] USB Video Class driver (1.1.1) [ 3.643982] thinkpad_acpi: ThinkPad ACPI Extras v0.25 [ 3.643983] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 3.643984] thinkpad_acpi: ThinkPad BIOS G1ETB4WW (2.74 ), EC unknown [ 3.643985] thinkpad_acpi: Lenovo ThinkPad T430, model 2349NL4 [ 3.645846] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 3.649165] thinkpad_acpi: radio switch found; radios are disabled [ 3.649191] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 3.649192] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 3.653924] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 3.655696] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input12 [ 3.657254] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 3.693738] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 3.716689] usbcore: registered new interface driver snd-usb-audio [ 3.718576] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3202: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 3.718579] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.718582] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) [ 3.718583] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 3.718584] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 3.718587] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 3.718589] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 [ 3.718590] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 3.750664] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 3.750727] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 3.750792] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 3.750844] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 3.750900] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 3.750952] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 3.751005] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 3.810192] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 3.810194] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 3.810195] RAPL PMU: hw unit of domain package 2^-16 Joules [ 3.810195] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 3.858822] AVX version of gcm_enc/dec engaged. [ 3.858823] AES CTR mode by8 optimization enabled [ 3.995234] intel_rapl: Found RAPL domain package [ 3.995236] intel_rapl: Found RAPL domain core [ 3.995237] intel_rapl: Found RAPL domain uncore [ 3.995242] intel_rapl: RAPL package 0 domain package locked by BIOS [ 4.057171] random: crng init done [ 4.259521] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0 [ 4.282712] spl: loading out-of-tree module taints kernel. [ 4.293404] SPL: Loaded module v0.6.5.11-1ubuntu1 [ 4.295952] znvpair: module license 'CDDL' taints kernel. [ 4.295953] Disabling lock debugging due to kernel taint [ 4.348755] ZFS: Loaded module v0.6.5.11-1ubuntu3, ZFS pool version 5000, ZFS filesystem version 5 [ 5.326751] SPL: using hostid 0x00000000 [ 5.505392] audit: type=1400 audit(1522830282.696:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4327/usr/lib/snapd/snap-confine" pid=2381 comm="apparmor_parser" [ 5.505397] audit: type=1400 audit(1522830282.696:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4327/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2381 comm="apparmor_parser" [ 5.505743] audit: type=1400 audit(1522830282.697:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=2384 comm="apparmor_parser" [ 5.506856] audit: type=1400 audit(1522830282.698:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=2380 comm="apparmor_parser" [ 5.506860] audit: type=1400 audit(1522830282.698:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2380 comm="apparmor_parser" [ 5.506863] audit: type=1400 audit(1522830282.698:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=2380 comm="apparmor_parser" [ 5.506865] audit: type=1400 audit(1522830282.698:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2380 comm="apparmor_parser" [ 5.509404] audit: type=1400 audit(1522830282.700:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=2390 comm="apparmor_parser" [ 5.509409] audit: type=1400 audit(1522830282.700:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2390 comm="apparmor_parser" [ 6.233639] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 6.464207] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 6.467685] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 6.522567] Ebtables v2.0 registered [ 7.507013] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 7.507814] virbr0: port 1(virbr0-nic) entered blocking state [ 7.507816] virbr0: port 1(virbr0-nic) entered disabled state [ 7.507847] device virbr0-nic entered promiscuous mode [ 7.619582] virbr0: port 1(virbr0-nic) entered blocking state [ 7.619584] virbr0: port 1(virbr0-nic) entered listening state [ 7.654300] virbr0: port 1(virbr0-nic) entered disabled state [ 11.997796] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 11.997849] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 12.117335] e1000e: enp0s25 NIC Link is Down [ 12.348489] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 12.363104] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 17.132902] e1000e: enp0s25 NIC Link is Down [ 17.364436] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 20.863210] rfkill: input handler disabled [ 22.781822] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 22.781862] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 22.892572] e1000e: enp0s25 NIC Link is Down [ 23.120306] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 23.141330] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 27.133286] e1000e: enp0s25 NIC Link is Down [ 27.360411] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 32.829807] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 32.829864] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 32.957275] e1000e: enp0s25 NIC Link is Down [ 33.184435] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 33.196742] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 37.132968] e1000e: enp0s25 NIC Link is Down [ 37.360402] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 40.247107] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio. [ 40.247114] iwlwifi 0000:03:00.0: reporting RF_KILL (radio enabled) [ 40.265664] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 40.566831] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 40.652099] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 40.701455] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 42.813914] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 42.813969] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 42.937648] e1000e: enp0s25 NIC Link is Down [ 43.164427] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 43.180021] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 44.337271] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 44.639829] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 44.723386] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 44.777821] wlp3s0: authenticate with cc:b2:55:8e:2e:b0 [ 44.781011] wlp3s0: send auth to cc:b2:55:8e:2e:b0 (try 1/3) [ 44.883868] wlp3s0: authenticated [ 44.888055] wlp3s0: associate with cc:b2:55:8e:2e:b0 (try 1/3) [ 44.891912] wlp3s0: RX AssocResp from cc:b2:55:8e:2e:b0 (capab=0x431 status=0 aid=3) [ 44.894670] wlp3s0: associated [ 44.894748] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 46.919019] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio. [ 46.919026] iwlwifi 0000:03:00.0: reporting RF_KILL (radio disabled) [ 46.920290] wlp3s0: deauthenticating from cc:b2:55:8e:2e:b0 by local choice (Reason: 3=DEAUTH_LEAVING) [ 46.926797] iwlwifi 0000:03:00.0: Not sending command - RF KILL [ 46.926803] wlp3s0: HW problem - can not stop rx aggregation for cc:b2:55:8e:2e:b0 tid 0 [ 46.928835] iwlwifi 0000:03:00.0: Not sending command - RF KILL [ 46.928839] wlp3s0: failed to remove key (0, cc:b2:55:8e:2e:b0) from hardware (-5) [ 46.944249] iwlwifi 0000:03:00.0: Not sending command - RF KILL [ 46.944256] iwlwifi 0000:03:00.0: Not sending command - RF KILL [ 46.944273] iwlwifi 0000:03:00.0: Not sending command - RF KILL [ 46.944281] iwlwifi 0000:03:00.0: Not sending command - RF KILL [ 46.944291] iwlwifi 0000:03:00.0: Not sending command - RF KILL [ 46.944328] iwlwifi 0000:03:00.0: Not sending command - RF KILL [ 46.944331] wlp3s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-5) [ 46.944590] iwlwifi 0000:03:00.0: Not sending command - RF KILL [ 46.944625] iwlwifi 0000:03:00.0: Not sending command - RF KILL [ 47.141042] e1000e: enp0s25 NIC Link is Down [ 47.368470] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 52.957843] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 52.957921] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 53.085023] e1000e: enp0s25 NIC Link is Down [ 53.312387] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 53.319281] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 58.133365] e1000e: enp0s25 NIC Link is Down [ 58.364416] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 63.805793] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 63.805846] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 63.921258] e1000e: enp0s25 NIC Link is Down [ 64.152433] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 64.170225] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 68.149150] e1000e: enp0s25 NIC Link is Down [ 68.376449] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 73.821845] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 73.821897] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 73.941072] e1000e: enp0s25 NIC Link is Down [ 74.172430] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 74.191945] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 78.149384] e1000e: enp0s25 NIC Link is Down [ 78.380437] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 80.080146] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio. [ 80.080154] iwlwifi 0000:03:00.0: reporting RF_KILL (radio enabled) [ 80.098710] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 80.399597] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 80.484622] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 80.545399] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 83.805717] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 84.048821] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 84.062843] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 84.362918] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 84.446558] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 84.588992] e1000e: enp0s25 NIC Link is Down [ 84.816406] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 84.843028] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 84.846380] wlp3s0: authenticate with cc:b2:55:8e:2e:b0 [ 84.848442] wlp3s0: send auth to cc:b2:55:8e:2e:b0 (try 1/3) [ 84.850816] wlp3s0: authenticated [ 84.852022] wlp3s0: associate with cc:b2:55:8e:2e:b0 (try 1/3) [ 84.855862] wlp3s0: RX AssocResp from cc:b2:55:8e:2e:b0 (capab=0x431 status=0 aid=4) [ 84.858219] wlp3s0: associated [ 84.858282] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 89.128601] e1000e: enp0s25 NIC Link is Down [ 89.356476] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 93.101557] kauditd_printk_skb: 36 callbacks suppressed [ 93.101559] audit: type=1400 audit(1522830370.292:47): apparmor="DENIED" operation="open" profile="snap.firefox.firefox" name="/proc/3721/net/arp" pid=3721 comm=4C696E6B204D6F6E69746F72 requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 93.457638] audit: type=1400 audit(1522830370.649:48): apparmor="DENIED" operation="open" profile="snap.firefox.firefox" name="/etc/ld.so.conf" pid=3721 comm="firefox" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 94.325488] audit: type=1400 audit(1522830371.516:49): apparmor="DENIED" operation="open" profile="snap.firefox.firefox" name="/etc/ld.so.conf" pid=3721 comm="firefox" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 94.941794] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 94.941836] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 95.067544] e1000e: enp0s25 NIC Link is Down [ 95.296208] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 95.311201] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 100.180329] e1000e: enp0s25 NIC Link is Down [ 100.407801] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 105.820431] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 105.820484] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 105.936128] e1000e: enp0s25 NIC Link is Down [ 106.162743] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 106.184313] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 110.125308] e1000e: enp0s25 NIC Link is Down [ 110.352322] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 115.926353] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 115.926396] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 116.045783] e1000e: enp0s25 NIC Link is Down [ 116.272726] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 116.295523] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 121.136821] e1000e: enp0s25 NIC Link is Down [ 121.364073] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 126.805327] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 126.805367] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 126.920833] e1000e: enp0s25 NIC Link is Down [ 127.147772] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 127.168765] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 131.135548] e1000e: enp0s25 NIC Link is Down [ 131.363677] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 136.789152] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 136.789202] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 136.908387] e1000e: enp0s25 NIC Link is Down [ 137.135759] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 137.158012] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 141.139381] e1000e: enp0s25 NIC Link is Down [ 141.367594] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 146.773007] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 146.773059] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 146.888195] e1000e: enp0s25 NIC Link is Down [ 147.115513] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 147.139253] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 151.140211] e1000e: enp0s25 NIC Link is Down [ 151.367585] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 156.884864] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 156.884902] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 157.007211] e1000e: enp0s25 NIC Link is Down [ 157.235324] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 157.243577] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 161.111659] e1000e: enp0s25 NIC Link is Down [ 161.339347] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 166.845341] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 166.845408] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 166.964048] e1000e: enp0s25 NIC Link is Down [ 167.190565] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 167.213427] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 171.084724] e1000e: enp0s25 NIC Link is Down [ 171.312354] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 176.770680] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 176.770725] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 176.890164] e1000e: enp0s25 NIC Link is Down [ 177.116730] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 177.139730] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 181.060946] e1000e: enp0s25 NIC Link is Down [ 181.288014] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 186.732235] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 186.732287] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 186.858837] e1000e: enp0s25 NIC Link is Down [ 187.086337] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 187.093700] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 191.061974] e1000e: enp0s25 NIC Link is Down [ 191.288654] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 196.736942] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 196.736996] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 196.854815] e1000e: enp0s25 NIC Link is Down [ 197.086477] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 197.109417] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 201.047423] e1000e: enp0s25 NIC Link is Down [ 201.278463] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 206.679469] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 206.679524] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 206.798661] e1000e: enp0s25 NIC Link is Down [ 207.029746] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 207.054557] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 211.027353] e1000e: enp0s25 NIC Link is Down [ 211.254758] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 216.720639] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 216.720683] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 216.839582] e1000e: enp0s25 NIC Link is Down [ 217.071015] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 217.091461] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 221.036995] e1000e: enp0s25 NIC Link is Down [ 221.264221] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 226.706518] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 226.706583] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 226.826078] e1000e: enp0s25 NIC Link is Down [ 227.055338] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 227.076234] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 231.047537] e1000e: enp0s25 NIC Link is Down [ 231.276005] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 236.966280] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 236.966336] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 237.081890] e1000e: enp0s25 NIC Link is Down [ 237.309923] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 237.333977] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 242.089386] e1000e: enp0s25 NIC Link is Down [ 242.317696] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 248.004181] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 248.004231] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 248.131816] e1000e: enp0s25 NIC Link is Down [ 248.359461] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 248.368752] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 253.116567] e1000e: enp0s25 NIC Link is Down [ 253.343973] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 258.772605] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 258.772747] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 258.899308] e1000e: enp0s25 NIC Link is Down [ 259.127446] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 259.142106] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 263.139867] e1000e: enp0s25 NIC Link is Down [ 263.367868] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 269.022384] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 269.022436] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 269.141267] e1000e: enp0s25 NIC Link is Down [ 269.368937] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 269.392324] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 274.136451] e1000e: enp0s25 NIC Link is Down [ 274.364300] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 280.036965] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 280.037014] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 280.156145] e1000e: enp0s25 NIC Link is Down [ 280.383765] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 280.408155] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 285.159289] e1000e: enp0s25 NIC Link is Down [ 285.386167] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 290.825243] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 290.825285] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 290.944337] e1000e: enp0s25 NIC Link is Down [ 291.171742] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 291.190005] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 295.138681] e1000e: enp0s25 NIC Link is Down [ 295.366238] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 300.838094] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 300.838157] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 300.957531] e1000e: enp0s25 NIC Link is Down [ 301.184697] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 301.204712] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 305.136394] e1000e: enp0s25 NIC Link is Down [ 305.363736] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 310.820282] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 310.820331] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 310.935624] e1000e: enp0s25 NIC Link is Down [ 311.162919] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 311.185800] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 315.155342] e1000e: enp0s25 NIC Link is Down [ 315.382550] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 320.995714] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 320.995760] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 321.122626] e1000e: enp0s25 NIC Link is Down [ 321.350396] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 321.363112] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 326.134962] e1000e: enp0s25 NIC Link is Down [ 326.362246] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 332.004189] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 332.004234] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 332.127121] e1000e: enp0s25 NIC Link is Down [ 332.358643] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 332.369584] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 337.138839] e1000e: enp0s25 NIC Link is Down [ 337.367075] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 342.789139] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 342.789193] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 342.904402] e1000e: enp0s25 NIC Link is Down [ 343.131782] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 343.158197] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 347.141107] e1000e: enp0s25 NIC Link is Down [ 347.368266] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 352.838429] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 352.838484] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 352.957444] e1000e: enp0s25 NIC Link is Down [ 353.189151] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 353.212313] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 357.138219] e1000e: enp0s25 NIC Link is Down [ 357.365795] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 362.824181] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 362.824231] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 362.947561] e1000e: enp0s25 NIC Link is Down [ 363.178803] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 363.196444] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 367.160175] e1000e: enp0s25 NIC Link is Down [ 367.387515] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 372.970021] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 372.970077] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 373.092917] e1000e: enp0s25 NIC Link is Down [ 373.320623] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 373.334262] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 378.146213] e1000e: enp0s25 NIC Link is Down [ 378.373625] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 385.004540] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 385.004594] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 385.131792] e1000e: enp0s25 NIC Link is Down [ 385.359208] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 385.368696] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 390.149043] e1000e: enp0s25 NIC Link is Down [ 390.376230] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 396.014829] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 396.014879] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 396.130344] e1000e: enp0s25 NIC Link is Down [ 396.361526] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 396.385135] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 401.151478] e1000e: enp0s25 NIC Link is Down [ 401.378720] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 406.833382] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 406.833434] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 406.960837] e1000e: enp0s25 NIC Link is Down [ 407.187926] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 407.202853] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 411.149623] e1000e: enp0s25 NIC Link is Down [ 411.376922] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 417.011691] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 417.011745] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 417.139095] e1000e: enp0s25 NIC Link is Down [ 417.366403] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 417.379821] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 422.153623] e1000e: enp0s25 NIC Link is Down [ 422.381231] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 428.016952] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 428.017003] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 428.139864] e1000e: enp0s25 NIC Link is Down [ 428.367473] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 428.384972] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 433.150816] e1000e: enp0s25 NIC Link is Down [ 433.377985] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 438.798030] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 438.798083] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 438.917580] e1000e: enp0s25 NIC Link is Down [ 439.144564] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 439.166533] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 443.160121] e1000e: enp0s25 NIC Link is Down [ 443.387678] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 449.003941] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 449.003993] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 449.123270] e1000e: enp0s25 NIC Link is Down [ 449.354568] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 449.374425] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 454.142340] e1000e: enp0s25 NIC Link is Down [ 454.369671] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 460.010371] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 460.010421] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 460.137450] e1000e: enp0s25 NIC Link is Down [ 460.364945] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 460.379995] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 465.141029] e1000e: enp0s25 NIC Link is Down [ 465.368384] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 470.825393] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 470.825450] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 470.952287] e1000e: enp0s25 NIC Link is Down [ 471.184007] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 471.197955] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 475.144346] e1000e: enp0s25 NIC Link is Down [ 475.375769] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 481.001043] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 481.001095] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 481.128137] e1000e: enp0s25 NIC Link is Down [ 481.355553] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 481.368412] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 486.144100] e1000e: enp0s25 NIC Link is Down [ 486.371321] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 491.816758] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 491.816815] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 491.936318] e1000e: enp0s25 NIC Link is Down [ 492.163409] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 492.185643] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 496.155532] e1000e: enp0s25 NIC Link is Down [ 496.383314] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 501.992956] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 501.993010] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 502.112316] e1000e: enp0s25 NIC Link is Down [ 502.339435] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 502.357762] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 507.140391] e1000e: enp0s25 NIC Link is Down [ 507.367662] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 512.841373] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 512.841429] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 512.960882] e1000e: enp0s25 NIC Link is Down [ 513.187864] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 513.207399] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 517.156731] e1000e: enp0s25 NIC Link is Down [ 517.384102] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 522.826007] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 522.826057] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 522.940829] e1000e: enp0s25 NIC Link is Down [ 523.168539] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 523.191487] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 527.145408] e1000e: enp0s25 NIC Link is Down [ 527.372697] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 532.842677] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 532.842734] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 532.958206] e1000e: enp0s25 NIC Link is Down [ 533.185223] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 533.205910] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 537.158256] e1000e: enp0s25 NIC Link is Down [ 537.389674] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 542.827585] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 542.827638] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 542.947001] e1000e: enp0s25 NIC Link is Down [ 543.178230] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 543.193170] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 547.147132] e1000e: enp0s25 NIC Link is Down [ 547.374613] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 552.844677] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 552.844736] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 552.972051] e1000e: enp0s25 NIC Link is Down [ 553.199886] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 553.207402] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 557.164316] e1000e: enp0s25 NIC Link is Down [ 557.395664] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 562.829783] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 562.829837] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 562.944914] e1000e: enp0s25 NIC Link is Down [ 563.172343] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 563.194518] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 567.145552] e1000e: enp0s25 NIC Link is Down [ 567.372942] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 572.847008] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 572.847060] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 572.962057] e1000e: enp0s25 NIC Link is Down [ 573.189681] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 573.210712] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 577.150746] e1000e: enp0s25 NIC Link is Down [ 577.378162] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 582.832243] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 582.832283] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 582.942692] e1000e: enp0s25 NIC Link is Down [ 583.170876] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 583.197501] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 587.152187] e1000e: enp0s25 NIC Link is Down [ 587.379453] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 592.881644] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 592.881692] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 593.000727] e1000e: enp0s25 NIC Link is Down [ 593.228320] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 593.253138] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 597.149580] e1000e: enp0s25 NIC Link is Down [ 597.376842] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 602.867131] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 602.867188] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 602.986734] e1000e: enp0s25 NIC Link is Down [ 603.213851] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 603.237791] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 607.149998] e1000e: enp0s25 NIC Link is Down [ 607.378307] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 612.852546] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 612.852596] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 612.967647] e1000e: enp0s25 NIC Link is Down [ 613.195192] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 613.215030] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 617.168383] e1000e: enp0s25 NIC Link is Down [ 617.395765] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 622.838092] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 622.838153] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 622.957512] e1000e: enp0s25 NIC Link is Down [ 623.184867] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 623.206144] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 627.153991] e1000e: enp0s25 NIC Link is Down [ 627.385346] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 632.855669] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 632.855724] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 632.971320] e1000e: enp0s25 NIC Link is Down [ 633.198294] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 633.216383] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 637.159553] e1000e: enp0s25 NIC Link is Down [ 637.390874] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 643.065318] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 643.065370] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 643.181057] e1000e: enp0s25 NIC Link is Down [ 643.408038] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 643.430412] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 648.176436] e1000e: enp0s25 NIC Link is Down [ 648.404741] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 653.851173] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 653.851509] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 653.970630] e1000e: enp0s25 NIC Link is Down [ 654.205733] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 654.227740] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 658.174889] e1000e: enp0s25 NIC Link is Down [ 658.402252] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready