[ 0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-11-12 [ 0.000000] Linux version 5.3.0-62-generic (buildd@lcy01-amd64-018) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #56-Ubuntu SMP Tue Jun 23 11:20:52 UTC 2020 (Ubuntu 5.3.0-62.56-generic 5.3.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-62-generic root=UUID=28bbf48e-a2b3-40d0-8c46-1017917537ed ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009ef27fff] usable [ 0.000000] BIOS-e820: [mem 0x000000009ef28000-0x000000009f2ecfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009f2ed000-0x00000000a3b8ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a3b90000-0x00000000a43c0fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a43c1000-0x00000000a43e8fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000a43e9000-0x00000000a4d1cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a4d1d000-0x00000000a4ffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a4fff000-0x00000000a4ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a5800000-0x00000000a7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000156ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x9dce8018-0x9dcf8057] usable ==> usable [ 0.000000] e820: update [mem 0x9dce8018-0x9dcf8057] usable ==> usable [ 0.000000] e820: update [mem 0x9f2f3018-0x9f2ff057] usable ==> usable [ 0.000000] e820: update [mem 0x9f2f3018-0x9f2ff057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000009dce8017] usable [ 0.000000] reserve setup_data: [mem 0x000000009dce8018-0x000000009dcf8057] usable [ 0.000000] reserve setup_data: [mem 0x000000009dcf8058-0x000000009ef27fff] usable [ 0.000000] reserve setup_data: [mem 0x000000009ef28000-0x000000009f2ecfff] reserved [ 0.000000] reserve setup_data: [mem 0x000000009f2ed000-0x000000009f2f3017] usable [ 0.000000] reserve setup_data: [mem 0x000000009f2f3018-0x000000009f2ff057] usable [ 0.000000] reserve setup_data: [mem 0x000000009f2ff058-0x00000000a3b8ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000a3b90000-0x00000000a43c0fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000a43c1000-0x00000000a43e8fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000a43e9000-0x00000000a4d1cfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000a4d1d000-0x00000000a4ffefff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000a4fff000-0x00000000a4ffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000a5800000-0x00000000a7ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x0000000156ffffff] usable [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ACPI=0xa43c9000 ACPI 2.0=0xa43c9000 ESRT=0xa4eead98 SMBIOS=0xf05b0 MPS=0xfd950 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Dell Inc. Inspiron 3543/0RG2FR, BIOS A07 10/16/2015 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1995.383 MHz processor [ 0.002781] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002783] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.002791] last_pfn = 0x157000 max_arch_pfn = 0x400000000 [ 0.002796] MTRR default type: uncachable [ 0.002797] MTRR fixed ranges enabled: [ 0.002798] 00000-9FFFF write-back [ 0.002799] A0000-BFFFF uncachable [ 0.002800] C0000-DFFFF write-protect [ 0.002801] E0000-E7FFF write-through [ 0.002801] E8000-FFFFF write-protect [ 0.002802] MTRR variable ranges enabled: [ 0.002804] 0 base 0000000000 mask 7F80000000 write-back [ 0.002805] 1 base 0080000000 mask 7FE0000000 write-back [ 0.002806] 2 base 00A0000000 mask 7FFC000000 write-back [ 0.002807] 3 base 00A4000000 mask 7FFF000000 write-back [ 0.002808] 4 base 0100000000 mask 7FC0000000 write-back [ 0.002808] 5 base 0140000000 mask 7FF0000000 write-back [ 0.002809] 6 base 0150000000 mask 7FFC000000 write-back [ 0.002810] 7 base 0154000000 mask 7FFE000000 write-back [ 0.002811] 8 base 0156000000 mask 7FFF000000 write-back [ 0.002812] 9 disabled [ 0.003169] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.003317] e820: update [mem 0xa5000000-0xffffffff] usable ==> reserved [ 0.003322] last_pfn = 0xa5000 max_arch_pfn = 0x400000000 [ 0.013182] found SMP MP-table at [mem 0x000fdb60-0x000fdb6f] [ 0.013197] esrt: Reserving ESRT space from 0x00000000a4eead98 to 0x00000000a4eeadd0. [ 0.013207] check: Scanning 1 areas for low memory corruption [ 0.013211] Using GB pages for direct mapping [ 0.013213] BRK [0x36c01000, 0x36c01fff] PGTABLE [ 0.013214] BRK [0x36c02000, 0x36c02fff] PGTABLE [ 0.013215] BRK [0x36c03000, 0x36c03fff] PGTABLE [ 0.013243] BRK [0x36c04000, 0x36c04fff] PGTABLE [ 0.013245] BRK [0x36c05000, 0x36c05fff] PGTABLE [ 0.013451] BRK [0x36c06000, 0x36c06fff] PGTABLE [ 0.013504] BRK [0x36c07000, 0x36c07fff] PGTABLE [ 0.013549] BRK [0x36c08000, 0x36c08fff] PGTABLE [ 0.013584] RAMDISK: [mem 0x3d242000-0x3fffdfff] [ 0.013592] ACPI: Early table checksum verification disabled [ 0.013596] ACPI: RSDP 0x00000000A43C9000 000024 (v02 DELL ) [ 0.013600] ACPI: XSDT 0x00000000A43C9098 0000B4 (v01 DELL WN09 01072009 AMI 00010013) [ 0.013606] ACPI: FACP 0x00000000A43E0130 00010C (v05 DELL WN09 01072009 AMI 00010013) [ 0.013612] ACPI: DSDT 0x00000000A43C91E0 016F4C (v02 DELL WN09 01072009 INTL 20120913) [ 0.013615] ACPI: FACS 0x00000000A4D17F80 000040 [ 0.013618] ACPI: APIC 0x00000000A43E0240 000084 (v03 DELL WN09 01072009 AMI 00010013) [ 0.013621] ACPI: FPDT 0x00000000A43E02C8 000044 (v01 DELL WN09 01072009 AMI 00010013) [ 0.013624] ACPI: FIDT 0x00000000A43E0310 00009C (v01 DELL WN09 01072009 AMI 00010013) [ 0.013627] ACPI: MCFG 0x00000000A43E03B0 00003C (v01 DELL WN09 01072009 MSFT 00000097) [ 0.013630] ACPI: HPET 0x00000000A43E03F0 000038 (v01 DELL WN09 01072009 AMI. 00000005) [ 0.013634] ACPI: SSDT 0x00000000A43E0428 000315 (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.013637] ACPI: UEFI 0x00000000A43E0740 000042 (v01 00000000 00000000) [ 0.013640] ACPI: SSDT 0x00000000A43E0788 000194 (v01 Intel zpodd 00001000 INTL 20120913) [ 0.013643] ACPI: LPIT 0x00000000A43E0920 000094 (v01 00000000 00000000) [ 0.013647] ACPI: SSDT 0x00000000A43E09B8 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913) [ 0.013650] ACPI: ASF! 0x00000000A43E1638 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.013653] ACPI: SSDT 0x00000000A43E16D8 000539 (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.013656] ACPI: SSDT 0x00000000A43E1C18 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.013659] ACPI: SSDT 0x00000000A43E2790 005C44 (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.013663] ACPI: DMAR 0x00000000A43E83D8 0000D4 (v01 DELL WN09 00000001 INTL 00000001) [ 0.013666] ACPI: CSRT 0x00000000A43E84B0 0000C4 (v01 DELL WN09 00000001 INTL 20100528) [ 0.013669] ACPI: BGRT 0x00000000A43E8578 000038 (v01 DELL WN09 01072009 AMI 00010013) [ 0.013678] ACPI: Local APIC address 0xfee00000 [ 0.013782] No NUMA configuration found [ 0.013783] Faking a node at [mem 0x0000000000000000-0x0000000156ffffff] [ 0.013795] NODE_DATA(0) allocated [mem 0x156fd3000-0x156ffdfff] [ 0.014037] Zone ranges: [ 0.014039] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.014040] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.014041] Normal [mem 0x0000000100000000-0x0000000156ffffff] [ 0.014042] Device empty [ 0.014043] Movable zone start for each node [ 0.014047] Early memory node ranges [ 0.014048] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.014049] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.014050] node 0: [mem 0x0000000000100000-0x000000009ef27fff] [ 0.014051] node 0: [mem 0x000000009f2ed000-0x00000000a3b8ffff] [ 0.014051] node 0: [mem 0x00000000a4fff000-0x00000000a4ffffff] [ 0.014052] node 0: [mem 0x0000000100000000-0x0000000156ffffff] [ 0.014369] Zeroed struct page in unavailable ranges: 22679 pages [ 0.014370] Initmem setup node 0 [mem 0x0000000000001000-0x0000000156ffffff] [ 0.014372] On node 0 totalpages: 1025897 [ 0.014373] DMA zone: 64 pages used for memmap [ 0.014374] DMA zone: 24 pages reserved [ 0.014375] DMA zone: 3997 pages, LIFO batch:0 [ 0.014436] DMA32 zone: 10400 pages used for memmap [ 0.014437] DMA32 zone: 665548 pages, LIFO batch:63 [ 0.027207] Normal zone: 5568 pages used for memmap [ 0.027209] Normal zone: 356352 pages, LIFO batch:63 [ 0.032666] Reserving Intel graphics memory at [mem 0xa6000000-0xa7ffffff] [ 0.032742] ACPI: PM-Timer IO Port: 0x1808 [ 0.032744] ACPI: Local APIC address 0xfee00000 [ 0.032751] ACPI: LAPIC_NMI (acpi_id[0x01] low level lint[0x72]) [ 0.032752] ACPI: NMI not connected to LINT 1! [ 0.032753] ACPI: LAPIC_NMI (acpi_id[0x02] res dfl lint[0x0]) [ 0.032753] ACPI: NMI not connected to LINT 1! [ 0.032754] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0xc1]) [ 0.032754] ACPI: NMI not connected to LINT 1! [ 0.032755] ACPI: LAPIC_NMI (acpi_id[0x04] low level lint[0x0]) [ 0.032756] ACPI: NMI not connected to LINT 1! [ 0.032767] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.032769] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.032771] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.032772] ACPI: IRQ0 used by override. [ 0.032773] ACPI: IRQ9 used by override. [ 0.032775] Using ACPI (MADT) for SMP configuration information [ 0.032777] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.032786] e820: update [mem 0xa179c000-0xa17c9fff] usable ==> reserved [ 0.032798] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.032821] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.032823] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.032825] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.032826] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.032827] PM: Registered nosave memory: [mem 0x9dce8000-0x9dce8fff] [ 0.032829] PM: Registered nosave memory: [mem 0x9dcf8000-0x9dcf8fff] [ 0.032831] PM: Registered nosave memory: [mem 0x9ef28000-0x9f2ecfff] [ 0.032833] PM: Registered nosave memory: [mem 0x9f2f3000-0x9f2f3fff] [ 0.032835] PM: Registered nosave memory: [mem 0x9f2ff000-0x9f2fffff] [ 0.032836] PM: Registered nosave memory: [mem 0xa179c000-0xa17c9fff] [ 0.032838] PM: Registered nosave memory: [mem 0xa3b90000-0xa43c0fff] [ 0.032839] PM: Registered nosave memory: [mem 0xa43c1000-0xa43e8fff] [ 0.032840] PM: Registered nosave memory: [mem 0xa43e9000-0xa4d1cfff] [ 0.032840] PM: Registered nosave memory: [mem 0xa4d1d000-0xa4ffefff] [ 0.032842] PM: Registered nosave memory: [mem 0xa5000000-0xa57fffff] [ 0.032843] PM: Registered nosave memory: [mem 0xa5800000-0xa7ffffff] [ 0.032843] PM: Registered nosave memory: [mem 0xa8000000-0xf7ffffff] [ 0.032844] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.032845] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.032845] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.032846] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.032846] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.032847] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.032848] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.032848] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.032849] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.032849] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.032850] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.032852] [mem 0xa8000000-0xf7ffffff] available for PCI devices [ 0.032853] Booting paravirtualized kernel on bare hardware [ 0.032857] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.032864] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.033186] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288 [ 0.033193] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152 [ 0.033194] pcpu-alloc: [0] 0 1 2 3 [ 0.033231] Built 1 zonelists, mobility grouping on. Total pages: 1009841 [ 0.033231] Policy zone: Normal [ 0.033233] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-62-generic root=UUID=28bbf48e-a2b3-40d0-8c46-1017917537ed ro quiet splash vt.handoff=7 [ 0.033716] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.033905] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.033959] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.040201] Calgary: detecting Calgary via BIOS EBDA area [ 0.040203] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.056299] Memory: 3798260K/4103588K available (14339K kernel code, 2388K rwdata, 4732K rodata, 2680K init, 5040K bss, 305328K reserved, 0K cma-reserved) [ 0.056308] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0 [ 0.056466] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.056484] Kernel/User page tables isolation: enabled [ 0.056501] ftrace: allocating 43625 entries in 171 pages [ 0.076646] rcu: Hierarchical RCU implementation. [ 0.076647] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.076648] Tasks RCU enabled. [ 0.076649] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.076650] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.080670] NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16 [ 0.080997] random: crng done (trusting CPU's manufacturer) [ 0.081028] vt handoff: transparent VT on vt#7 [ 0.081035] Console: colour dummy device 80x25 [ 0.081040] printk: console [tty0] enabled [ 0.081059] ACPI: Core revision 20190703 [ 0.081248] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.081259] APIC: Switch to symmetric I/O mode setup [ 0.081261] DMAR: Host address width 39 [ 0.081263] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.081268] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e [ 0.081269] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.081273] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.081274] DMAR: RMRR base: 0x000000a4efb000 end: 0x000000a4f09fff [ 0.081275] DMAR: RMRR base: 0x000000a5800000 end: 0x000000a7ffffff [ 0.081276] DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA [ 0.081278] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.081279] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.081280] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.081280] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.081982] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.081983] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.082609] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.101261] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x398649fe205, max_idle_ns: 881590824548 ns [ 0.101266] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.76 BogoMIPS (lpj=7981532) [ 0.101268] pid_max: default: 32768 minimum: 301 [ 0.104807] LSM: Security Framework initializing [ 0.104818] Yama: becoming mindful. [ 0.104855] AppArmor: AppArmor initialized [ 0.104905] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.104917] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.105105] *** VALIDATE proc *** [ 0.105165] *** VALIDATE cgroup1 *** [ 0.105166] *** VALIDATE cgroup2 *** [ 0.105237] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.105251] process: using mwait in idle threads [ 0.105254] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.105255] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.105266] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.105268] Spectre V2 : Mitigation: Full generic retpoline [ 0.105268] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.105269] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.105270] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.105271] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.105273] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.105277] SRBDS: Mitigation: Microcode [ 0.105277] MDS: Mitigation: Clear CPU buffers [ 0.105560] Freeing SMP alternatives memory: 36K [ 0.109362] smpboot: CPU0: Intel(R) Core(TM) i3-5005U CPU @ 2.00GHz (family: 0x6, model: 0x3d, stepping: 0x4) [ 0.109515] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.109535] ... version: 3 [ 0.109536] ... bit width: 48 [ 0.109536] ... generic registers: 4 [ 0.109537] ... value mask: 0000ffffffffffff [ 0.109537] ... max period: 00007fffffffffff [ 0.109538] ... fixed-purpose events: 3 [ 0.109539] ... event mask: 000000070000000f [ 0.109583] rcu: Hierarchical SRCU implementation. [ 0.110636] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.110719] smp: Bringing up secondary CPUs ... [ 0.110834] x86: Booting SMP configuration: [ 0.110835] .... node #0, CPUs: #1 #2 [ 0.113888] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.113888] #3 [ 0.113893] smp: Brought up 1 node, 4 CPUs [ 0.113893] smpboot: Max logical packages: 1 [ 0.113893] smpboot: Total of 4 processors activated (15963.06 BogoMIPS) [ 0.114958] devtmpfs: initialized [ 0.114958] x86/mm: Memory block size: 128MB [ 0.114958] PM: Registering ACPI NVS region [mem 0xa43e9000-0xa4d1cfff] (9650176 bytes) [ 0.117457] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.117457] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.117457] pinctrl core: initialized pinctrl subsystem [ 0.117471] PM: RTC time: 02:18:44, date: 2021-09-11 [ 0.117595] NET: Registered protocol family 16 [ 0.117708] audit: initializing netlink subsys (disabled) [ 0.117715] audit: type=2000 audit(1631326724.036:1): state=initialized audit_enabled=0 res=1 [ 0.117715] EISA bus registered [ 0.117715] cpuidle: using governor ladder [ 0.117715] cpuidle: using governor menu [ 0.117715] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.117715] ACPI: bus type PCI registered [ 0.117715] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.117715] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.117715] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.117715] PCI: Using configuration type 1 for base access [ 0.117715] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.118801] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.118801] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.121390] ACPI: Added _OSI(Module Device) [ 0.121391] ACPI: Added _OSI(Processor Device) [ 0.121392] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.121393] ACPI: Added _OSI(Processor Aggregator Device) [ 0.121394] ACPI: Added _OSI(Linux-Dell-Video) [ 0.121395] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.121396] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.153252] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.156655] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.166219] ACPI: Dynamic OEM Table Load: [ 0.166226] ACPI: SSDT 0xFFFF91FCD1482C00 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.168040] ACPI: Dynamic OEM Table Load: [ 0.168045] ACPI: SSDT 0xFFFF91FCD1A3A000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.169923] ACPI: Dynamic OEM Table Load: [ 0.169927] ACPI: SSDT 0xFFFF91FCD1494200 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.173975] ACPI: Interpreter enabled [ 0.174012] ACPI: (supports S0 S3 S4 S5) [ 0.174013] ACPI: Using IOAPIC for interrupt routing [ 0.174061] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.175111] ACPI: Enabled 9 GPEs in block 00 to 7F [ 0.179542] ACPI: Power Resource [PG00] (on) [ 0.180140] ACPI: Power Resource [PG01] (on) [ 0.180737] ACPI: Power Resource [PG02] (on) [ 0.182887] ACPI: Power Resource [WRST] (off) [ 0.183373] ACPI: Power Resource [WRST] (off) [ 0.183866] ACPI: Power Resource [WRST] (off) [ 0.184360] ACPI: Power Resource [WRST] (off) [ 0.184873] ACPI: Power Resource [WRST] (off) [ 0.185379] ACPI: Power Resource [WRST] (off) [ 0.185887] ACPI: Power Resource [WRST] (off) [ 0.186372] ACPI: Power Resource [WRST] (off) [ 0.205619] ACPI: Power Resource [FN00] (off) [ 0.205725] ACPI: Power Resource [FN01] (off) [ 0.205827] ACPI: Power Resource [FN02] (off) [ 0.205926] ACPI: Power Resource [FN03] (off) [ 0.206024] ACPI: Power Resource [FN04] (off) [ 0.207560] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.207567] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.208614] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.208615] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.209481] PCI host bridge to bus 0000:00 [ 0.209484] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.209485] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.209486] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.209488] pci_bus 0000:00: root bus resource [mem 0xa8000000-0xdfffffff window] [ 0.209489] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfe113fff window] [ 0.209490] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.209502] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.209636] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.209649] pci 0000:00:02.0: reg 0x10: [mem 0xa9000000-0xa9ffffff 64bit] [ 0.209656] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.209660] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.209676] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.209833] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.209843] pci 0000:00:03.0: reg 0x10: [mem 0xaa214000-0xaa217fff 64bit] [ 0.209994] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.210013] pci 0000:00:14.0: reg 0x10: [mem 0xaa200000-0xaa20ffff 64bit] [ 0.210074] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.210183] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.210205] pci 0000:00:16.0: reg 0x10: [mem 0xaa21c000-0xaa21c01f 64bit] [ 0.210276] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.210447] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 0.210464] pci 0000:00:1b.0: reg 0x10: [mem 0xaa210000-0xaa213fff 64bit] [ 0.210517] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.210671] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400 [ 0.210814] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.211015] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400 [ 0.211098] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.211298] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400 [ 0.211381] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.211579] pci 0000:00:1c.4: [8086:9c98] type 01 class 0x060400 [ 0.211670] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.211872] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 [ 0.211894] pci 0000:00:1d.0: reg 0x10: [mem 0xaa21a000-0xaa21a3ff] [ 0.211982] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.212095] pci 0000:00:1f.0: [8086:9cc5] type 00 class 0x060100 [ 0.212313] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.212329] pci 0000:00:1f.2: reg 0x10: [io 0x40b0-0x40b7] [ 0.212336] pci 0000:00:1f.2: reg 0x14: [io 0x40a0-0x40a3] [ 0.212342] pci 0000:00:1f.2: reg 0x18: [io 0x4090-0x4097] [ 0.212349] pci 0000:00:1f.2: reg 0x1c: [io 0x4080-0x4083] [ 0.212355] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] [ 0.212362] pci 0000:00:1f.2: reg 0x24: [mem 0xaa219000-0xaa2197ff] [ 0.212398] pci 0000:00:1f.2: PME# supported from D3hot [ 0.212500] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.212516] pci 0000:00:1f.3: reg 0x10: [mem 0xaa218000-0xaa2180ff 64bit] [ 0.212535] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f] [ 0.212720] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.212810] pci 0000:06:00.0: [168c:0036] type 00 class 0x028000 [ 0.212858] pci 0000:06:00.0: reg 0x10: [mem 0xaa100000-0xaa17ffff 64bit] [ 0.212914] pci 0000:06:00.0: reg 0x30: [mem 0xaa180000-0xaa18ffff pref] [ 0.213043] pci 0000:06:00.0: supports D1 D2 [ 0.213045] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.213254] pci 0000:00:1c.2: PCI bridge to [bus 06] [ 0.213258] pci 0000:00:1c.2: bridge window [mem 0xaa100000-0xaa1fffff] [ 0.213364] pci 0000:07:00.0: [10ec:8136] type 00 class 0x020000 [ 0.213398] pci 0000:07:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.213430] pci 0000:07:00.0: reg 0x18: [mem 0xaa000000-0xaa000fff 64bit] [ 0.213452] pci 0000:07:00.0: reg 0x20: [mem 0xc0000000-0xc0003fff 64bit pref] [ 0.213566] pci 0000:07:00.0: supports D1 D2 [ 0.213567] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.213768] pci 0000:00:1c.3: PCI bridge to [bus 07] [ 0.213771] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 0.213774] pci 0000:00:1c.3: bridge window [mem 0xaa000000-0xaa0fffff] [ 0.213778] pci 0000:00:1c.3: bridge window [mem 0xc0000000-0xc00fffff 64bit pref] [ 0.213844] pci 0000:00:1c.4: PCI bridge to [bus 08] [ 0.218640] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.218721] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.218801] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.218880] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.218959] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.219039] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.219118] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.219196] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.226445] SCSI subsystem initialized [ 0.226445] libata version 3.00 loaded. [ 0.226445] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.226445] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.226445] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.226445] vgaarb: loaded [ 0.226445] ACPI: bus type USB registered [ 0.226445] usbcore: registered new interface driver usbfs [ 0.226445] usbcore: registered new interface driver hub [ 0.226445] usbcore: registered new device driver usb [ 0.283351] pps_core: LinuxPPS API ver. 1 registered [ 0.283351] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.283354] PTP clock support registered [ 0.285285] EDAC MC: Ver: 3.0.0 [ 0.285364] Registered efivars operations [ 0.285364] PCI: Using ACPI for IRQ routing [ 0.286630] PCI: pci_cache_line_size set to 64 bytes [ 0.286683] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.286686] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.286687] e820: reserve RAM buffer [mem 0x9dce8018-0x9fffffff] [ 0.286688] e820: reserve RAM buffer [mem 0x9ef28000-0x9fffffff] [ 0.286689] e820: reserve RAM buffer [mem 0x9f2f3018-0x9fffffff] [ 0.286690] e820: reserve RAM buffer [mem 0xa179c000-0xa3ffffff] [ 0.286691] e820: reserve RAM buffer [mem 0xa3b90000-0xa3ffffff] [ 0.286691] e820: reserve RAM buffer [mem 0xa5000000-0xa7ffffff] [ 0.286692] e820: reserve RAM buffer [mem 0x157000000-0x157ffffff] [ 0.286802] NetLabel: Initializing [ 0.286803] NetLabel: domain hash size = 128 [ 0.286803] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.286824] NetLabel: unlabeled traffic allowed by default [ 0.289964] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.289971] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.291998] clocksource: Switched to clocksource tsc-early [ 0.303550] VFS: Disk quotas dquot_6.6.0 [ 0.303568] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.303599] *** VALIDATE hugetlbfs *** [ 0.303694] AppArmor: AppArmor Filesystem Enabled [ 0.303730] pnp: PnP ACPI init [ 0.304008] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.304010] system 00:00: [io 0xffff] has been reserved [ 0.304011] system 00:00: [io 0xffff] has been reserved [ 0.304013] system 00:00: [io 0xffff] has been reserved [ 0.304014] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.304015] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.304021] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.304082] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.304134] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.304137] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.304187] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.304189] system 00:03: [mem 0xfe800000-0xfe802fff] has been reserved [ 0.304192] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.304228] pnp 00:04: Plug and Play ACPI device, IDs DLL065a SYN0600 SYN0002 PNP0f13 (active) [ 0.304257] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.304538] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.304540] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.304541] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.304542] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.304544] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.304545] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.304547] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.304548] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.304550] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.304551] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.304553] system 00:06: [mem 0xa8010000-0xa801ffff] has been reserved [ 0.304554] system 00:06: [mem 0xa8000000-0xa800ffff] has been reserved [ 0.304558] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.305395] system 00:07: [mem 0xfe102000-0xfe102fff] has been reserved [ 0.305397] system 00:07: [mem 0xfe104000-0xfe104fff] has been reserved [ 0.305398] system 00:07: [mem 0xfe106000-0xfe106fff] has been reserved [ 0.305400] system 00:07: [mem 0xfe10e000-0xfe10efff] has been reserved [ 0.305404] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.310795] pnp: PnP ACPI: found 8 devices [ 0.312190] thermal_sys: Registered thermal governor 'fair_share' [ 0.312191] thermal_sys: Registered thermal governor 'bang_bang' [ 0.312191] thermal_sys: Registered thermal governor 'step_wise' [ 0.312192] thermal_sys: Registered thermal governor 'user_space' [ 0.312193] thermal_sys: Registered thermal governor 'power_allocator' [ 0.316682] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.316721] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.316724] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 0.316725] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000 [ 0.316733] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa8100000-0xa82fffff] [ 0.316739] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa8300000-0xa84fffff 64bit pref] [ 0.316741] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.316743] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.316746] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.316750] pci 0000:00:1c.0: bridge window [mem 0xa8100000-0xa82fffff] [ 0.316753] pci 0000:00:1c.0: bridge window [mem 0xa8300000-0xa84fffff 64bit pref] [ 0.316758] pci 0000:00:1c.2: PCI bridge to [bus 06] [ 0.316761] pci 0000:00:1c.2: bridge window [mem 0xaa100000-0xaa1fffff] [ 0.316769] pci 0000:00:1c.3: PCI bridge to [bus 07] [ 0.316771] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 0.316775] pci 0000:00:1c.3: bridge window [mem 0xaa000000-0xaa0fffff] [ 0.316778] pci 0000:00:1c.3: bridge window [mem 0xc0000000-0xc00fffff 64bit pref] [ 0.316782] pci 0000:00:1c.4: PCI bridge to [bus 08] [ 0.316793] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.316795] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.316796] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.316797] pci_bus 0000:00: resource 7 [mem 0xa8000000-0xdfffffff window] [ 0.316798] pci_bus 0000:00: resource 8 [mem 0xfe000000-0xfe113fff window] [ 0.316800] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 0.316801] pci_bus 0000:04: resource 1 [mem 0xa8100000-0xa82fffff] [ 0.316802] pci_bus 0000:04: resource 2 [mem 0xa8300000-0xa84fffff 64bit pref] [ 0.316803] pci_bus 0000:06: resource 1 [mem 0xaa100000-0xaa1fffff] [ 0.316804] pci_bus 0000:07: resource 0 [io 0x3000-0x3fff] [ 0.316806] pci_bus 0000:07: resource 1 [mem 0xaa000000-0xaa0fffff] [ 0.316807] pci_bus 0000:07: resource 2 [mem 0xc0000000-0xc00fffff 64bit pref] [ 0.316994] NET: Registered protocol family 2 [ 0.317137] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.317173] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.317274] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.317325] TCP: Hash tables configured (established 32768 bind 32768) [ 0.317365] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.317381] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.317458] NET: Registered protocol family 1 [ 0.317462] NET: Registered protocol family 44 [ 0.317473] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.341393] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 23087 usecs [ 0.341416] PCI: CLS 64 bytes, default 64 [ 0.341464] Trying to unpack rootfs image as initramfs... [ 0.477596] Initramfs unpacking failed: Decoding failed [ 0.484625] Freeing initrd memory: 46832K [ 0.484725] DMAR: ACPI device "INTL9C60:00" under DMAR at fed91000 as 00:15.0 [ 0.505292] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.505294] software IO TLB: mapped [mem 0x97303000-0x9b303000] (64MB) [ 0.505513] check: Scanning for low memory corruption every 60 seconds [ 0.507687] Initialise system trusted keyrings [ 0.507700] Key type blacklist registered [ 0.507734] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 0.509289] zbud: loaded [ 0.509711] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.509877] fuse: init (API version 7.31) [ 0.509995] Platform Keyring initialized [ 0.516557] Key type asymmetric registered [ 0.516558] Asymmetric key parser 'x509' registered [ 0.516570] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.516622] io scheduler mq-deadline registered [ 0.517009] pcieport 0000:00:1c.0: PME: Signaling with IRQ 42 [ 0.517035] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 0.517292] pcieport 0000:00:1c.2: PME: Signaling with IRQ 43 [ 0.517489] pcieport 0000:00:1c.3: PME: Signaling with IRQ 44 [ 0.517678] pcieport 0000:00:1c.4: PME: Signaling with IRQ 45 [ 0.517758] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.517833] efifb: probing for efifb [ 0.517862] efifb: showing boot graphics [ 0.518510] efifb: framebuffer at 0xb0000000, using 4128k, total 4128k [ 0.518511] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 0.518512] efifb: scrolling: redraw [ 0.518513] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.518571] fbcon: Deferring console take-over [ 0.518572] fb0: EFI VGA frame buffer device [ 0.518580] intel_idle: MWAIT substates: 0x11142120 [ 0.518581] intel_idle: v0.4.1 model 0x3D [ 0.518828] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.519020] ACPI: AC Adapter [AC] (off-line) [ 0.519096] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.519104] ACPI: Sleep Button [SLPB] [ 0.519137] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.519149] ACPI: Lid Switch [LID0] [ 0.519183] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 0.519191] ACPI: Power Button [PWRB] [ 0.519222] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.519228] ACPI: Power Button [PWRF] [ 0.545799] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.545801] ACPI: Thermal Zone [THM] (37 C) [ 0.546389] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.546390] ACPI: Thermal Zone [TZ00] (28 C) [ 0.546731] thermal LNXTHERM:02: registered as thermal_zone2 [ 0.546731] ACPI: Thermal Zone [TZ01] (30 C) [ 0.546921] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.548758] Linux agpgart interface v0.103 [ 0.550770] loop: module loaded [ 0.551013] libphy: Fixed MDIO Bus: probed [ 0.551014] tun: Universal TUN/TAP device driver, 1.6 [ 0.551045] PPP generic driver version 2.4.2 [ 0.551084] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.551088] ehci-pci: EHCI PCI platform driver [ 0.551283] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.551290] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.551301] ehci-pci 0000:00:1d.0: debug port 2 [ 0.555210] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.555227] ehci-pci 0000:00:1d.0: irq 23, io mem 0xaa21a000 [ 0.569329] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.569402] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 0.569404] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.569405] usb usb1: Product: EHCI Host Controller [ 0.569406] usb usb1: Manufacturer: Linux 5.3.0-62-generic ehci_hcd [ 0.569407] usb usb1: SerialNumber: 0000:00:1d.0 [ 0.569826] hub 1-0:1.0: USB hub found [ 0.569832] hub 1-0:1.0: 2 ports detected [ 0.570837] ehci-platform: EHCI generic platform driver [ 0.570859] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.570862] ohci-pci: OHCI PCI platform driver [ 0.570874] ohci-platform: OHCI generic platform driver [ 0.570884] uhci_hcd: USB Universal Host Controller Interface driver [ 0.571197] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.571203] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.572247] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810 [ 0.572252] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.572399] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 0.572401] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.572402] usb usb2: Product: xHCI Host Controller [ 0.572403] usb usb2: Manufacturer: Linux 5.3.0-62-generic xhci-hcd [ 0.572404] usb usb2: SerialNumber: 0000:00:14.0 [ 0.572511] hub 2-0:1.0: USB hub found [ 0.572523] hub 2-0:1.0: 11 ports detected [ 0.576303] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.576307] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.576309] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.576344] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 0.576346] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.576347] usb usb3: Product: xHCI Host Controller [ 0.576348] usb usb3: Manufacturer: Linux 5.3.0-62-generic xhci-hcd [ 0.576349] usb usb3: SerialNumber: 0000:00:14.0 [ 0.576445] hub 3-0:1.0: USB hub found [ 0.576454] hub 3-0:1.0: 4 ports detected [ 0.578190] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.581997] battery: ACPI: Battery Slot [BAT0] (battery present) [ 0.582721] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.582725] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.582837] mousedev: PS/2 mouse device common for all mice [ 0.582997] rtc_cmos 00:01: RTC can wake from S4 [ 0.583163] rtc_cmos 00:01: registered as rtc0 [ 0.583178] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.583185] i2c /dev entries driver [ 0.583274] device-mapper: uevent: version 1.0.3 [ 0.583332] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 0.583351] platform eisa.0: Probing EISA bus 0 [ 0.583352] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.583354] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.583355] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.583356] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.583357] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.583358] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.583359] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.583360] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.583361] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.583362] platform eisa.0: EISA: Detected 0 cards [ 0.583371] intel_pstate: Intel P-state driver initializing [ 0.583621] ledtrig-cpu: registered to indicate activity on CPUs [ 0.583625] EFI Variables Facility v0.08 2004-May-17 [ 0.586932] NET: Registered protocol family 10 [ 0.597534] Segment Routing with IPv6 [ 0.597565] NET: Registered protocol family 17 [ 0.597605] Key type dns_resolver registered [ 0.597872] RAS: Correctable Errors collector initialized. [ 0.597910] microcode: sig=0x306d4, pf=0x40, revision=0x2f [ 0.597961] microcode: Microcode Update Driver: v2.2. [ 0.597979] sched_clock: Marking stable (597554479, 401365)->(609659397, -11703553) [ 0.598139] registered taskstats version 1 [ 0.598148] Loading compiled-in X.509 certificates [ 0.600786] Loaded X.509 cert 'Build time autogenerated kernel key: bc521b7fbd8368b0ea31f199f1c5acbe7836c238' [ 0.600831] zswap: loaded using pool lzo/zbud [ 0.606313] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.611451] Key type big_key registered [ 0.616381] Key type encrypted registered [ 0.616385] AppArmor: AppArmor sha1 policy hashing enabled [ 0.616571] integrity: Loading X.509 certificate: UEFI:db [ 0.616612] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.616612] integrity: Loading X.509 certificate: UEFI:db [ 0.616637] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.617171] ima: No TPM chip found, activating TPM-bypass! [ 0.617177] ima: Allocated hash algorithm: sha1 [ 0.617183] No architecture policies found [ 0.617192] evm: Initialising EVM extended attributes: [ 0.617193] evm: security.selinux [ 0.617193] evm: security.SMACK64 [ 0.617194] evm: security.SMACK64EXEC [ 0.617194] evm: security.SMACK64TRANSMUTE [ 0.617195] evm: security.SMACK64MMAP [ 0.617195] evm: security.apparmor [ 0.617196] evm: security.ima [ 0.617197] evm: security.capability [ 0.617197] evm: HMAC attrs: 0x1 [ 0.618377] PM: Magic number: 5:325:308 [ 0.618379] PM: hash matches drivers/base/power/main.c:644 [ 0.618411] tty tty37: hash matches [ 0.618502] rtc_cmos 00:01: setting system clock to 2021-09-11T02:18:44 UTC (1631326724) [ 0.620015] Freeing unused decrypted memory: 2040K [ 0.620562] Freeing unused kernel image memory: 2680K [ 0.641364] Write protecting the kernel read-only data: 22528k [ 0.641919] Freeing unused kernel image memory: 2008K [ 0.642228] Freeing unused kernel image memory: 1412K [ 0.654987] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.654989] x86/mm: Checking user space page tables [ 0.667417] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.667419] Run /init as init process [ 0.781119] hidraw: raw HID events driver (C) Jiri Kosina [ 0.783700] i2c_hid i2c-DLL0654:00: i2c-DLL0654:00 supply vdd not found, using dummy regulator [ 0.783719] i2c_hid i2c-DLL0654:00: i2c-DLL0654:00 supply vddl not found, using dummy regulator [ 0.811335] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 0.817217] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.817243] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.850589] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control [ 0.853040] ahci 0000:00:1f.2: version 3.0 [ 0.854631] libphy: r8169: probed [ 0.855140] r8169 0000:07:00.0 eth0: RTL8106e, 20:47:47:55:49:01, XID 449, IRQ 47 [ 0.862464] input: DLL0654:00 06CB:2985 Mouse as /devices/pci0000:00/INT3433:00/i2c-1/i2c-DLL0654:00/0018:06CB:2985.0001/input/input7 [ 0.862646] hid-generic 0018:06CB:2985.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL0654:00 06CB:2985] on i2c-DLL0654:00 [ 0.865497] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 0.865501] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 0.865954] mc: Linux media interface: v0.10 [ 0.866244] scsi host0: ahci [ 0.866677] scsi host1: ahci [ 0.866768] ata1: SATA max UDMA/133 abar m2048@0xaa219000 port 0xaa219100 irq 48 [ 0.866771] ata2: SATA max UDMA/133 abar m2048@0xaa219000 port 0xaa219180 irq 48 [ 0.867521] r8169 0000:07:00.0 enp7s0: renamed from eth0 [ 0.886924] videodev: Linux video capture interface: v2.00 [ 0.909301] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.913332] usb 2-1: new low-speed USB device number 2 using xhci_hcd [ 0.995688] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: s3203_ver5, fw id: 1712843 [ 1.056237] input: Synaptics s3203_ver5 as /devices/pci0000:00/INT3433:00/i2c-1/i2c-DLL0654:00/0018:06CB:2985.0001/input/input9 [ 1.056391] hid-rmi 0018:06CB:2985.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL0654:00 06CB:2985] on i2c-DLL0654:00 [ 1.065667] usb 1-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.03 [ 1.065669] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.065970] hub 1-1:1.0: USB hub found [ 1.066023] hub 1-1:1.0: 8 ports detected [ 1.068156] usb 2-1: New USB device found, idVendor=1bcf, idProduct=08a0, bcdDevice= 1.02 [ 1.068158] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.078055] input: HID 1bcf:08a0 Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:1BCF:08A0.0002/input/input10 [ 1.078175] input: HID 1bcf:08a0 Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:1BCF:08A0.0002/input/input11 [ 1.137465] input: HID 1bcf:08a0 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:1BCF:08A0.0002/input/input12 [ 1.137582] hid-generic 0003:1BCF:08A0.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [HID 1bcf:08a0] on usb-0000:00:14.0-1/input0 [ 1.137624] usbcore: registered new interface driver usbhid [ 1.137625] usbhid: USB HID core driver [ 1.185696] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.185712] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.188527] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C0, max UDMA/100 [ 1.191748] ata1.00: LPM support broken, forcing max_power [ 1.191969] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30004, max UDMA/133 [ 1.191971] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32) [ 1.193310] ata2.00: configured for UDMA/100 [ 1.198080] ata1.00: LPM support broken, forcing max_power [ 1.198307] ata1.00: configured for UDMA/133 [ 1.208722] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0004 PQ: 0 ANSI: 5 [ 1.209134] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.209239] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.209242] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.209260] sd 0:0:0:0: [sda] Write Protect is off [ 1.209262] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.209302] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.210349] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU90N A1C0 PQ: 0 ANSI: 5 [ 1.266973] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.266975] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.267294] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.267383] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.272351] sda: sda1 sda2 [ 1.273041] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.353330] usb 1-1.5: new high-speed USB device number 3 using ehci-pci [ 1.521324] tsc: Refined TSC clocksource calibration: 1995.380 MHz [ 1.521334] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39864456686, max_idle_ns: 881590680204 ns [ 1.521380] clocksource: Switched to clocksource tsc [ 1.542990] usb 1-1.5: New USB device found, idVendor=0c45, idProduct=670b, bcdDevice=32.62 [ 1.542992] usb 1-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 1.542994] usb 1-1.5: Product: Integrated_Webcam_HD [ 1.542995] usb 1-1.5: Manufacturer: CN0VFVY97248761FBC89A00 [ 1.629335] usb 1-1.6: new full-speed USB device number 4 using ehci-pci [ 1.726151] fbcon: Taking over console [ 1.726246] Console: switching to colour frame buffer device 170x48 [ 1.742624] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.01 [ 1.742627] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.808933] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 1.821309] usb 1-1.8: new high-speed USB device number 5 using ehci-pci [ 1.930165] usb 1-1.8: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60 [ 1.930168] usb 1-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.930169] usb 1-1.8: Product: USB2.0-CRW [ 1.930170] usb 1-1.8: Manufacturer: Generic [ 1.930171] usb 1-1.8: SerialNumber: 20100201396000000 [ 3.565119] systemd[1]: Inserted module 'autofs4' [ 3.740514] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 3.757410] systemd[1]: Detected architecture x86-64. [ 3.759973] systemd[1]: Set hostname to . [ 3.776090] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 6.251283] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 6.442907] systemd[1]: /etc/systemd/system/teamviewerd.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly. [ 7.605914] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 7.606089] systemd[1]: Listening on Syslog Socket. [ 7.606107] systemd[1]: Reached target Remote File Systems. [ 7.606308] systemd[1]: Listening on Journal Audit Socket. [ 8.135892] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 8.730672] systemd-journald[322]: Received request to flush runtime journal from PID 1 [ 8.768233] lp: driver loaded but no devices found [ 8.833323] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 8.855838] ppdev: user-space parallel port driver [ 16.977467] INT3435:00: ttyS4 at MMIO 0xfe10d000 (irq = 13, base_baud = 6250000) is a 16550A [ 17.011153] input: DELL Wireless hotkeys as /devices/virtual/input/input13 [ 17.053451] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels [ 17.123806] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3) [ 17.161163] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS [ 17.198035] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input14 [ 17.720731] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 17.720733] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 17.720734] RAPL PMU: hw unit of domain package 2^-14 Joules [ 17.720735] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 17.720736] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 20.437385] usbcore: registered new interface driver rtsx_usb [ 20.948830] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670b) [ 20.998036] uvcvideo 1-1.5:1.0: Entity type for entity Extension 4 was not initialized! [ 20.998038] uvcvideo 1-1.5:1.0: Entity type for entity Extension 3 was not initialized! [ 20.998040] uvcvideo 1-1.5:1.0: Entity type for entity Processing 2 was not initialized! [ 20.998041] uvcvideo 1-1.5:1.0: Entity type for entity Camera 1 was not initialized! [ 20.998125] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input15 [ 20.998205] usbcore: registered new interface driver uvcvideo [ 20.998206] USB Video Class driver (1.1.1) [ 21.098099] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 21.101410] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 21.822450] cryptd: max_cpu_qlen set to 1000 [ 22.097726] Bluetooth: Core ver 2.22 [ 22.097748] NET: Registered protocol family 31 [ 22.097749] Bluetooth: HCI device and connection manager initialized [ 22.097753] Bluetooth: HCI socket layer initialized [ 22.097755] Bluetooth: L2CAP socket layer initialized [ 22.097758] Bluetooth: SCO socket layer initialized [ 22.767906] AVX2 version of gcm_enc/dec engaged. [ 22.767907] AES CTR mode by8 optimization enabled [ 22.895286] ath9k 0000:06:00.0: enabling device (0000 -> 0002) [ 22.895448] ath: phy0: WB335 1-ANT card detected [ 22.895449] ath: phy0: Set BT/WLAN RX diversity capability [ 22.904954] ath: phy0: Enable LNA combining [ 22.906209] ath: phy0: ASPM enabled: 0x43 [ 22.906211] ath: EEPROM regdomain: 0x60 [ 22.906212] ath: EEPROM indicates we should expect a direct regpair map [ 22.906213] ath: Country alpha2 being used: 00 [ 22.906214] ath: Regpair used: 0x60 [ 22.907184] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 22.907724] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffb92cc1000000, irq=18 [ 23.227941] ath9k 0000:06:00.0 wlp6s0: renamed from wlan0 [ 23.391584] usbcore: registered new interface driver btusb [ 24.367600] checking generic (b0000000 408000) vs hw (b0000000 10000000) [ 24.367602] fb0: switching to inteldrmfb from EFI VGA [ 24.367858] Console: switching to colour dummy device 80x25 [ 24.367953] i915 0000:00:02.0: vgaarb: deactivate vga console [ 24.369536] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 24.369537] [drm] Driver supports precise vblank timestamp query. [ 24.370051] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 24.383062] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0 [ 24.385848] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 24.386156] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16 [ 24.389053] fbcon: i915drmfb (fb0) is primary device [ 24.389146] Console: switching to colour frame buffer device 170x48 [ 24.389169] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 24.878920] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 24.879144] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 25.009676] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3234: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 25.009679] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 25.009680] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 25.009681] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 25.009682] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 25.009684] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x19 [ 25.009685] snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x1a [ 25.009686] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 25.055934] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 25.135014] usbcore: registered new interface driver ath3k [ 25.388555] usb 1-1.6: USB disconnect, device number 4 [ 25.554071] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 25.627595] usb 1-1.6: new full-speed USB device number 6 using ehci-pci [ 25.732157] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18 [ 25.732259] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19 [ 25.732356] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20 [ 25.732453] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21 [ 25.732544] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22 [ 26.388363] intel_rapl_common: Found RAPL domain package [ 26.388365] intel_rapl_common: Found RAPL domain core [ 26.388366] intel_rapl_common: Found RAPL domain uncore [ 26.388368] intel_rapl_common: Found RAPL domain dram [ 26.388370] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 26.388376] intel_rapl_common: RAPL package-0 domain dram locked by BIOS [ 30.882438] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.02 [ 30.882440] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 31.641608] audit: type=1400 audit(1631326755.518:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=867 comm="apparmor_parser" [ 31.641616] audit: type=1400 audit(1631326755.518:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=867 comm="apparmor_parser" [ 31.664202] audit: type=1400 audit(1631326755.538:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=869 comm="apparmor_parser" [ 31.664205] audit: type=1400 audit(1631326755.538:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=869 comm="apparmor_parser" [ 31.664208] audit: type=1400 audit(1631326755.538:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=869 comm="apparmor_parser" [ 31.755694] audit: type=1400 audit(1631326755.630:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=884 comm="apparmor_parser" [ 31.915305] audit: type=1400 audit(1631326755.790:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=885 comm="apparmor_parser" [ 31.931683] audit: type=1400 audit(1631326755.806:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=868 comm="apparmor_parser" [ 31.931688] audit: type=1400 audit(1631326755.806:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=868 comm="apparmor_parser" [ 31.931692] audit: type=1400 audit(1631326755.806:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=868 comm="apparmor_parser" [ 47.596674] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 47.596676] Bluetooth: BNEP filters: protocol multicast [ 47.596681] Bluetooth: BNEP socket layer initialized [ 52.862984] RTL8208 Fast Ethernet r8169-700:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-700:00, irq=IGNORE) [ 53.122135] r8169 0000:07:00.0 enp7s0: Link is Down [ 55.203792] wlp6s0: authenticate with 34:0a:33:ef:59:4e [ 55.216287] wlp6s0: send auth to 34:0a:33:ef:59:4e (try 1/3) [ 55.218208] wlp6s0: authenticated [ 55.221338] wlp6s0: associate with 34:0a:33:ef:59:4e (try 1/3) [ 55.225126] wlp6s0: RX AssocResp from 34:0a:33:ef:59:4e (capab=0x411 status=0 aid=4) [ 55.225257] wlp6s0: associated [ 55.343462] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready [ 80.052172] rfkill: input handler disabled [ 100.437425] rfkill: input handler enabled [ 101.490432] Bluetooth: RFCOMM TTY layer initialized [ 101.490442] Bluetooth: RFCOMM socket layer initialized [ 101.490453] Bluetooth: RFCOMM ver 1.11 [ 114.100238] rfkill: input handler disabled [ 125.833461] PM: suspend entry (deep) [ 127.192191] Filesystems sync: 1.358 seconds [ 127.192661] Freezing user space processes ... (elapsed 0.047 seconds) done. [ 127.240293] OOM killer disabled. [ 127.240295] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 127.241781] printk: Suspending console(s) (use no_console_suspend to debug) [ 127.242561] wlp6s0: deauthenticating from 34:0a:33:ef:59:4e by local choice (Reason: 3=DEAUTH_LEAVING) [ 127.412268] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 127.434218] sd 0:0:0:0: [sda] Stopping disk [ 128.580833] ACPI: Preparing to enter system sleep state S3 [ 128.595329] PM: Saving platform NVS memory [ 128.595480] Disabling non-boot CPUs ... [ 128.596103] IRQ 48: no longer affine to CPU1 [ 128.597145] smpboot: CPU 1 is now offline [ 128.600338] IRQ 56: no longer affine to CPU2 [ 128.601347] smpboot: CPU 2 is now offline [ 128.604930] IRQ 23: no longer affine to CPU3 [ 128.604938] IRQ 44: no longer affine to CPU3 [ 128.604941] IRQ 45: no longer affine to CPU3 [ 128.604944] IRQ 46: no longer affine to CPU3 [ 128.605965] smpboot: CPU 3 is now offline [ 128.609647] ACPI: Low-level resume complete [ 128.609719] PM: Restoring platform NVS memory [ 128.619394] Enabling non-boot CPUs ... [ 128.619456] x86: Booting SMP configuration: [ 128.619457] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 128.622489] CPU1 is up [ 128.622532] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 128.623506] CPU2 is up [ 128.623543] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 128.624588] CPU3 is up [ 128.627928] ACPI: Waking up from system sleep state S3 [ 128.746788] ath: phy0: ASPM enabled: 0x43 [ 128.749234] sd 0:0:0:0: [sda] Starting disk [ 129.001637] usb 1-1.5: reset high-speed USB device number 3 using ehci-pci [ 129.065377] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 129.070642] ata2.00: configured for UDMA/100 [ 129.133908] usb 2-1: reset low-speed USB device number 2 using xhci_hcd [ 129.189663] usb 1-1.6: reset full-speed USB device number 6 using ehci-pci [ 129.297960] usb 1-1.6: device firmware changed [ 129.377644] usb 1-1.8: reset high-speed USB device number 5 using ehci-pci [ 129.493319] OOM killer enabled. [ 129.493322] Restarting tasks ... [ 129.496722] pci_bus 0000:04: Allocating resources [ 129.496743] pci_bus 0000:06: Allocating resources [ 129.496764] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 [ 129.496775] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000 [ 129.496789] pci_bus 0000:07: Allocating resources [ 129.496817] pci_bus 0000:08: Allocating resources [ 129.496824] pcieport 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000 [ 129.496832] pcieport 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000 [ 129.496838] pcieport 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000 add_align 100000 [ 129.496877] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xa8500000-0xa86fffff 64bit pref] [ 129.496887] pcieport 0000:00:1c.4: BAR 14: assigned [mem 0xa8700000-0xa88fffff] [ 129.496904] pcieport 0000:00:1c.4: BAR 15: assigned [mem 0xa8900000-0xa8afffff 64bit pref] [ 129.496915] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x5000-0x5fff] [ 129.496925] pcieport 0000:00:1c.4: BAR 13: assigned [io 0x6000-0x6fff] [ 129.500779] pci_bus 0000:04: Allocating resources [ 129.500799] pci_bus 0000:06: Allocating resources [ 129.500822] pci_bus 0000:07: Allocating resources [ 129.500850] pci_bus 0000:08: Allocating resources [ 129.510165] usb 1-1.6: USB disconnect, device number 6 [ 129.515662] done. [ 129.627927] usb 1-1.6: new full-speed USB device number 7 using ehci-pci [ 129.735450] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.01 [ 129.735454] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 129.792437] usb 1-1.6: USB disconnect, device number 7 [ 129.811778] PM: suspend exit [ 130.029561] usb 1-1.6: new full-speed USB device number 8 using ehci-pci [ 130.696789] wlp6s0: authenticate with 34:0a:33:ef:59:4e [ 130.712588] wlp6s0: send auth to 34:0a:33:ef:59:4e (try 1/3) [ 130.714515] wlp6s0: authenticated [ 130.718508] wlp6s0: associate with 34:0a:33:ef:59:4e (try 1/3) [ 130.722323] wlp6s0: RX AssocResp from 34:0a:33:ef:59:4e (capab=0x411 status=0 aid=4) [ 130.722461] wlp6s0: associated [ 131.037544] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 131.043600] ata1.00: LPM support broken, forcing max_power [ 131.050101] ata1.00: LPM support broken, forcing max_power [ 131.050494] ata1.00: configured for UDMA/133 [ 131.414341] wlp6s0: deauthenticating from 34:0a:33:ef:59:4e by local choice (Reason: 3=DEAUTH_LEAVING) [ 131.511620] RTL8208 Fast Ethernet r8169-700:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-700:00, irq=IGNORE) [ 131.770327] r8169 0000:07:00.0 enp7s0: Link is Down [ 132.959299] atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0). [ 132.959302] atkbd serio0: Use 'setkeycodes e00d ' to make it known. [ 133.192369] wlp6s0: authenticate with 34:0a:33:ef:59:4e [ 133.204924] wlp6s0: send auth to 34:0a:33:ef:59:4e (try 1/3) [ 133.206825] wlp6s0: authenticated [ 133.209483] wlp6s0: associate with 34:0a:33:ef:59:4e (try 1/3) [ 133.213306] wlp6s0: RX AssocResp from 34:0a:33:ef:59:4e (capab=0x411 status=0 aid=4) [ 133.213439] wlp6s0: associated [ 133.221308] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready [ 135.326756] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.02 [ 135.326761] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5170.640663] perf: interrupt took too long (2522 > 2500), lowering kernel.perf_event_max_sample_rate to 79250 [ 6410.073991] perf: interrupt took too long (3164 > 3152), lowering kernel.perf_event_max_sample_rate to 63000 [ 8650.955974] perf: interrupt took too long (3966 > 3955), lowering kernel.perf_event_max_sample_rate to 50250 [11348.785871] usb 2-1: reset low-speed USB device number 2 using xhci_hcd [11365.644911] usb 2-1: USB disconnect, device number 2 [11366.081492] usb 2-1: new low-speed USB device number 3 using xhci_hcd [11366.240348] usb 2-1: New USB device found, idVendor=1bcf, idProduct=08a0, bcdDevice= 1.02 [11366.240353] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [11366.247702] input: HID 1bcf:08a0 Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:1BCF:08A0.0003/input/input25 [11366.305744] input: HID 1bcf:08a0 Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:1BCF:08A0.0003/input/input26 [11366.306162] input: HID 1bcf:08a0 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:1BCF:08A0.0003/input/input27 [11366.306467] hid-generic 0003:1BCF:08A0.0003: input,hiddev0,hidraw1: USB HID v1.10 Mouse [HID 1bcf:08a0] on usb-0000:00:14.0-1/input0 [13874.817198] perf: interrupt took too long (4962 > 4957), lowering kernel.perf_event_max_sample_rate to 40250 [19793.928955] kauditd_printk_skb: 42 callbacks suppressed [19793.928957] audit: type=1400 audit(1631348389.182:54): apparmor="DENIED" operation="capable" profile="/snap/core/11606/usr/lib/snapd/snap-confine" pid=20913 comm="snap-confine" capability=4 capname="fsetid" [19797.712817] audit: type=1400 audit(1631348392.966:55): apparmor="DENIED" operation="mknod" profile="snap.pinta.pinta" name="/dev/shm/mono.20913" pid=20913 comm="mono" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000 [19801.975347] audit: type=1326 audit(1631348397.226:56): auid=1000 uid=1000 gid=1000 ses=3 pid=20913 comm="mono" exe="/snap/pinta/11/usr/bin/mono-sgen" sig=0 arch=c000003e syscall=314 compat=0 ip=0x7f6df556489d code=0x50000 [20098.869308] audit: type=1400 audit(1631348694.121:57): apparmor="DENIED" operation="mknod" profile="snap.pinta.pinta" name="/dev/shm/mono.21199" pid=21199 comm="mono" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000 [20100.536569] audit: type=1326 audit(1631348695.789:58): auid=1000 uid=1000 gid=1000 ses=3 pid=21199 comm="mono" exe="/snap/pinta/11/usr/bin/mono-sgen" sig=0 arch=c000003e syscall=314 compat=0 ip=0x7fb5e299f89d code=0x50000 [21507.443448] perf: interrupt took too long (6226 > 6202), lowering kernel.perf_event_max_sample_rate to 32000 [22245.073044] audit: type=1400 audit(1631350840.344:59): apparmor="DENIED" operation="mknod" profile="snap.wps-office-multilang.wps" name="/dev/shm/Hmq3yv" pid=23537 comm="wps" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000 [22245.783846] audit: type=1400 audit(1631350841.056:60): apparmor="DENIED" operation="create" profile="snap.wps-office-multilang.wps" pid=23537 comm="wps" family="inet" sock_type="stream" protocol=0 requested_mask="create" denied_mask="create" [22245.783900] audit: type=1400 audit(1631350841.056:61): apparmor="DENIED" operation="create" profile="snap.wps-office-multilang.wps" pid=23537 comm="wps" family="inet" sock_type="stream" protocol=0 requested_mask="create" denied_mask="create" [22245.818580] audit: type=1326 audit(1631350841.088:62): auid=1000 uid=1000 gid=1000 ses=3 pid=23537 comm="wps" exe="/snap/wps-office-multilang/1/opt/kingsoft/wps-office/office6/wps" sig=0 arch=c000003e syscall=41 compat=0 ip=0x7f8a2b75e6a7 code=0x50000 [22245.849295] audit: type=1400 audit(1631350841.120:63): apparmor="DENIED" operation="open" profile="snap.wps-office-multilang.wps" name="/etc/host.conf" pid=23537 comm="wps" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [22245.849338] audit: type=1400 audit(1631350841.120:64): apparmor="DENIED" operation="open" profile="snap.wps-office-multilang.wps" name="/run/systemd/resolve/stub-resolv.conf" pid=23537 comm="wps" requested_mask="r" denied_mask="r" fsuid=1000 ouid=102 [22245.849684] audit: type=1400 audit(1631350841.120:65): apparmor="DENIED" operation="open" profile="snap.wps-office-multilang.wps" name="/etc/hosts" pid=23537 comm="wps" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [22245.851665] audit: type=1400 audit(1631350841.124:66): apparmor="DENIED" operation="open" profile="snap.wps-office-multilang.wps" name="/run/systemd/resolve/stub-resolv.conf" pid=23537 comm="wps" requested_mask="r" denied_mask="r" fsuid=1000 ouid=102 [22245.851698] audit: type=1400 audit(1631350841.124:67): apparmor="DENIED" operation="create" profile="snap.wps-office-multilang.wps" pid=23537 comm="wps" family="inet" sock_type="dgram" protocol=0 requested_mask="create" denied_mask="create" [22245.851718] audit: type=1400 audit(1631350841.124:68): apparmor="DENIED" operation="create" profile="snap.wps-office-multilang.wps" pid=23537 comm="wps" family="inet" sock_type="dgram" protocol=0 requested_mask="create" denied_mask="create" [22547.764665] PM: suspend entry (deep) [22548.441736] Filesystems sync: 0.677 seconds [22548.513777] Freezing user space processes ... (elapsed 0.091 seconds) done. [22548.604812] OOM killer disabled. [22548.604813] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [22548.606422] printk: Suspending console(s) (use no_console_suspend to debug) [22548.607261] wlp6s0: deauthenticating from 34:0a:33:ef:59:4e by local choice (Reason: 3=DEAUTH_LEAVING) [22548.764825] sd 0:0:0:0: [sda] Synchronizing SCSI cache [22548.764928] sd 0:0:0:0: [sda] Stopping disk [22549.929348] ACPI: Preparing to enter system sleep state S3 [22549.942270] PM: Saving platform NVS memory [22549.942346] Disabling non-boot CPUs ... [22549.942669] IRQ 48: no longer affine to CPU1 [22549.943675] smpboot: CPU 1 is now offline [22549.945452] IRQ 56: no longer affine to CPU2 [22549.946456] smpboot: CPU 2 is now offline [22549.948370] IRQ 23: no longer affine to CPU3 [22549.948374] IRQ 42: no longer affine to CPU3 [22549.948376] IRQ 43: no longer affine to CPU3 [22549.948379] IRQ 45: no longer affine to CPU3 [22549.949401] smpboot: CPU 3 is now offline [22549.951843] ACPI: Low-level resume complete [22549.951914] PM: Restoring platform NVS memory [22549.961252] Enabling non-boot CPUs ... [22549.961313] x86: Booting SMP configuration: [22549.961315] smpboot: Booting Node 0 Processor 1 APIC 0x2 [22549.964101] CPU1 is up [22549.964143] smpboot: Booting Node 0 Processor 2 APIC 0x1 [22549.965065] CPU2 is up [22549.965097] smpboot: Booting Node 0 Processor 3 APIC 0x3 [22549.965920] CPU3 is up [22549.967547] ACPI: Waking up from system sleep state S3 [22550.087135] ath: phy0: ASPM enabled: 0x43 [22550.090957] sd 0:0:0:0: [sda] Starting disk [22550.338101] usb 1-1.8: reset high-speed USB device number 5 using ehci-pci [22550.405069] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [22550.409929] ata2.00: configured for UDMA/100 [22550.474305] usb 2-1: reset low-speed USB device number 3 using xhci_hcd [22550.526108] usb 1-1.6: reset full-speed USB device number 8 using ehci-pci [22550.634397] usb 1-1.6: device firmware changed [22550.714082] usb 1-1.5: reset high-speed USB device number 3 using ehci-pci [22552.442074] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [22552.448153] ata1.00: LPM support broken, forcing max_power [22552.454650] ata1.00: LPM support broken, forcing max_power [22552.455015] ata1.00: configured for UDMA/133 [22552.485672] OOM killer enabled. [22552.485674] Restarting tasks ... [22552.494724] pci_bus 0000:04: Allocating resources [22552.494735] pci_bus 0000:06: Allocating resources [22552.494751] pci_bus 0000:07: Allocating resources [22552.494773] pci_bus 0000:08: Allocating resources [22552.496050] pci_bus 0000:04: Allocating resources [22552.496060] pci_bus 0000:06: Allocating resources [22552.496076] pci_bus 0000:07: Allocating resources [22552.496096] pci_bus 0000:08: Allocating resources [22552.501394] done. [22552.575269] usb 1-1.6: USB disconnect, device number 8 [22552.658087] usb 1-1.6: new full-speed USB device number 9 using ehci-pci [22552.771353] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.01 [22552.771356] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [22552.808965] PM: suspend exit [22554.395447] atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0). [22554.395449] atkbd serio0: Use 'setkeycodes e00d ' to make it known. [22554.408246] wlp6s0: authenticate with 34:0a:33:ef:59:4e [22554.424884] wlp6s0: send auth to 34:0a:33:ef:59:4e (try 1/3) [22554.426828] wlp6s0: authenticated [22554.430053] wlp6s0: associate with 34:0a:33:ef:59:4e (try 1/3) [22554.434078] wlp6s0: RX AssocResp from 34:0a:33:ef:59:4e (capab=0x411 status=0 aid=4) [22554.434218] wlp6s0: associated [22554.700457] usb 1-1.6: USB disconnect, device number 9 [22554.929998] usb 1-1.6: new full-speed USB device number 10 using ehci-pci [22556.812700] wlp6s0: deauthenticating from 34:0a:33:ef:59:4e by local choice (Reason: 3=DEAUTH_LEAVING) [22556.838940] RTL8208 Fast Ethernet r8169-700:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-700:00, irq=IGNORE) [22557.094864] r8169 0000:07:00.0 enp7s0: Link is Down [22559.652462] wlp6s0: authenticate with 34:0a:33:ef:59:4e [22559.665232] wlp6s0: send auth to 34:0a:33:ef:59:4e (try 1/3) [22559.669109] wlp6s0: authenticated [22559.669981] wlp6s0: associate with 34:0a:33:ef:59:4e (try 1/3) [22559.675426] wlp6s0: RX AssocResp from 34:0a:33:ef:59:4e (capab=0x411 status=0 aid=4) [22559.675567] wlp6s0: associated [22559.683755] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready [22560.235126] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.02 [22560.235128] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [27782.784576] PM: suspend entry (deep) [27783.060845] Filesystems sync: 0.276 seconds [27783.148354] Freezing user space processes ... (elapsed 0.023 seconds) done. [27783.172229] OOM killer disabled. [27783.172230] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [27783.173845] printk: Suspending console(s) (use no_console_suspend to debug) [27783.174530] wlp6s0: deauthenticating from 34:0a:33:ef:59:4e by local choice (Reason: 3=DEAUTH_LEAVING) [27783.332157] sd 0:0:0:0: [sda] Synchronizing SCSI cache [27783.332261] sd 0:0:0:0: [sda] Stopping disk [27784.460747] ACPI: Preparing to enter system sleep state S3 [27784.474918] PM: Saving platform NVS memory [27784.475068] Disabling non-boot CPUs ... [27784.475712] IRQ 48: no longer affine to CPU1 [27784.476765] smpboot: CPU 1 is now offline [27784.478446] IRQ 56: no longer affine to CPU2 [27784.479768] smpboot: CPU 2 is now offline [27784.481321] IRQ 18: no longer affine to CPU3 [27784.481325] IRQ 42: no longer affine to CPU3 [27784.481327] IRQ 43: no longer affine to CPU3 [27784.481329] IRQ 45: no longer affine to CPU3 [27784.481332] IRQ 46: no longer affine to CPU3 [27784.482339] smpboot: CPU 3 is now offline [27784.484702] ACPI: Low-level resume complete [27784.484772] PM: Restoring platform NVS memory [27784.494345] Enabling non-boot CPUs ... [27784.494410] x86: Booting SMP configuration: [27784.494411] smpboot: Booting Node 0 Processor 1 APIC 0x2 [27784.497452] CPU1 is up [27784.497516] smpboot: Booting Node 0 Processor 2 APIC 0x1 [27784.498496] CPU2 is up [27784.498532] smpboot: Booting Node 0 Processor 3 APIC 0x3 [27784.499577] CPU3 is up [27784.502902] ACPI: Waking up from system sleep state S3 [27784.622643] ath: phy0: ASPM enabled: 0x43 [27784.624749] sd 0:0:0:0: [sda] Starting disk [27784.869579] usb 1-1.8: reset high-speed USB device number 5 using ehci-pci [27784.941276] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [27784.946120] ata2.00: configured for UDMA/100 [27785.009790] usb 2-1: reset low-speed USB device number 3 using xhci_hcd [27785.057564] usb 1-1.5: reset high-speed USB device number 3 using ehci-pci [27785.245569] usb 1-1.6: reset full-speed USB device number 10 using ehci-pci [27785.353981] usb 1-1.6: device firmware changed [27786.917610] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [27786.923690] ata1.00: LPM support broken, forcing max_power [27786.930209] ata1.00: LPM support broken, forcing max_power [27786.930597] ata1.00: configured for UDMA/133 [27787.185875] OOM killer enabled. [27787.185878] Restarting tasks ... [27787.195931] pci_bus 0000:04: Allocating resources [27787.195943] pci_bus 0000:06: Allocating resources [27787.195958] pci_bus 0000:07: Allocating resources [27787.195977] pci_bus 0000:08: Allocating resources [27787.197224] pci_bus 0000:04: Allocating resources [27787.197237] pci_bus 0000:06: Allocating resources [27787.197252] pci_bus 0000:07: Allocating resources [27787.197272] pci_bus 0000:08: Allocating resources [27787.202258] done. [27787.274774] usb 1-1.6: USB disconnect, device number 10 [27787.357612] usb 1-1.6: new full-speed USB device number 11 using ehci-pci [27787.466968] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.01 [27787.466974] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [27787.515290] PM: suspend exit [27788.722033] usb 1-1.6: USB disconnect, device number 11 [27788.887180] wlp6s0: authenticate with 34:0a:33:ef:59:4e [27788.904788] wlp6s0: send auth to 34:0a:33:ef:59:4e (try 1/3) [27788.906692] wlp6s0: authenticated [27788.909620] wlp6s0: associate with 34:0a:33:ef:59:4e (try 1/3) [27788.914919] wlp6s0: RX AssocResp from 34:0a:33:ef:59:4e (capab=0x411 status=0 aid=3) [27788.915052] wlp6s0: associated [27788.949616] usb 1-1.6: new full-speed USB device number 12 using ehci-pci [27789.103533] atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0). [27789.103537] atkbd serio0: Use 'setkeycodes e00d ' to make it known. [27790.963492] wlp6s0: deauthenticating from 34:0a:33:ef:59:4e by local choice (Reason: 3=DEAUTH_LEAVING) [27791.059253] RTL8208 Fast Ethernet r8169-700:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-700:00, irq=IGNORE) [27791.314560] r8169 0000:07:00.0 enp7s0: Link is Down [27793.630668] wlp6s0: authenticate with 34:0a:33:ef:59:4e [27793.643340] wlp6s0: send auth to 34:0a:33:ef:59:4e (try 1/3) [27793.645257] wlp6s0: authenticated [27793.649787] wlp6s0: associate with 34:0a:33:ef:59:4e (try 1/3) [27793.653625] wlp6s0: RX AssocResp from 34:0a:33:ef:59:4e (capab=0x411 status=0 aid=3) [27793.653818] wlp6s0: associated [27793.661818] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready [27794.095088] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.02 [27794.095094] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0