[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.0.19-02543-g73f2949c2dd9 (autobuild@deb.libre.computer) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP PREEMPT_DYNAMIC Tue Feb 14 05:59:27 UTC 2023 [ 0.000000] Machine model: Libre Computer ROC-RK3328-CC [ 0.000000] efi: EFI v2.90 by Das U-Boot [ 0.000000] efi: RTPROP=0xfbede040 SMBIOS=0xfbeda000 RNG=0xb7dd7040 MEMRESERVE=0xb7dd6040 [ 0.000000] random: crng init done [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000200000-0x00000000feffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000fbed9fff] [ 0.000000] node 0: [mem 0x00000000fbeda000-0x00000000fbedafff] [ 0.000000] node 0: [mem 0x00000000fbedb000-0x00000000fbeddfff] [ 0.000000] node 0: [mem 0x00000000fbede000-0x00000000fbedefff] [ 0.000000] node 0: [mem 0x00000000fbedf000-0x00000000fbedffff] [ 0.000000] node 0: [mem 0x00000000fbee0000-0x00000000fbee1fff] [ 0.000000] node 0: [mem 0x00000000fbee2000-0x00000000fbee2fff] [ 0.000000] node 0: [mem 0x00000000fbee3000-0x00000000fbee6fff] [ 0.000000] node 0: [mem 0x00000000fbee7000-0x00000000fef0ffff] [ 0.000000] node 0: [mem 0x00000000fef10000-0x00000000fef1ffff] [ 0.000000] node 0: [mem 0x00000000fef20000-0x00000000feffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000feffffff] [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges [ 0.000000] On node 0, zone DMA: 4096 pages in unavailable ranges [ 0.000000] cma: Reserved 384 MiB at 0x00000000dfe00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 20 pages/cpu s43240 r8192 d30488 u81920 [ 0.000000] pcpu-alloc: s43240 r8192 d30488 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1027656 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.0.19-02543-g73f2949c2dd9 root=UUID=21d20927-f521-453e-b2a4-f4285f9554ea ro noquiet splash vt.handoff=7 [ 0.000000] Unknown kernel command line parameters "noquiet splash BOOT_IMAGE=/boot/vmlinuz-6.0.19-02543-g73f2949c2dd9", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 3647356K/4175872K available (15616K kernel code, 1980K rwdata, 6312K rodata, 3776K init, 788K bss, 135300K reserved, 393216K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Dynamic Preempt: full [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001778] Console: colour dummy device 80x25 [ 0.002785] printk: console [tty0] enabled [ 0.002845] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.002891] pid_max: default: 32768 minimum: 301 [ 0.003007] LSM: Security Framework initializing [ 0.003047] Yama: becoming mindful. [ 0.003227] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.003284] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.005400] cblist_init_generic: Setting adjustable number of callback queues. [ 0.005454] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.005584] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.005837] rcu: Hierarchical SRCU implementation. [ 0.005862] rcu: Max phase no-delay instances is 1000. [ 0.008791] Remapping and enabling EFI services. [ 0.009262] smp: Bringing up secondary CPUs ... [ 0.009961] Detected VIPT I-cache on CPU1 [ 0.010131] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.010952] Detected VIPT I-cache on CPU2 [ 0.011114] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.011881] Detected VIPT I-cache on CPU3 [ 0.012045] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.012177] smp: Brought up 1 node, 4 CPUs [ 0.012304] SMP: Total of 4 processors activated. [ 0.012327] CPU features: detected: 32-bit EL0 Support [ 0.012347] CPU features: detected: 32-bit EL1 Support [ 0.012373] CPU features: detected: CRC32 instructions [ 0.013266] CPU: All CPU(s) started at EL2 [ 0.013328] alternatives: patching kernel code [ 0.015656] devtmpfs: initialized [ 0.030099] Registered cp15_barrier emulation handler [ 0.030151] Registered setend emulation handler [ 0.030442] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.030492] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.045025] pinctrl core: initialized pinctrl subsystem [ 0.045431] regulator-dummy: no parameters, enabled [ 0.045916] SMBIOS 3.0 present. [ 0.045971] DMI: libre-computer roc-rk3328-cc/roc-rk3328-cc, BIOS 2022.10+ 10/01/2022 [ 0.046710] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.048425] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.048952] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.049346] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.049472] audit: initializing netlink subsys (disabled) [ 0.049748] audit: type=2000 audit(0.048:1): state=initialized audit_enabled=0 res=1 [ 0.051188] thermal_sys: Registered thermal governor 'fair_share' [ 0.051207] thermal_sys: Registered thermal governor 'step_wise' [ 0.051239] thermal_sys: Registered thermal governor 'power_allocator' [ 0.051670] cpuidle: using governor menu [ 0.052002] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.052178] ASID allocator initialised with 32768 entries [ 0.070305] platform ff3c0000.hdmi: Fixing up cyclic dependency with ff370000.vop [ 0.085060] rockchip-gpio ff210000.gpio0: probed /pinctrl/gpio0@ff210000 [ 0.086055] rockchip-gpio ff220000.gpio1: probed /pinctrl/gpio1@ff220000 [ 0.086832] rockchip-gpio ff230000.gpio2: probed /pinctrl/gpio2@ff230000 [ 0.087603] rockchip-gpio ff240000.gpio3: probed /pinctrl/gpio3@ff240000 [ 0.093530] KASLR enabled [ 0.107527] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.107573] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.107603] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.107628] HugeTLB: 508 KiB vmemmap can be freed for a 32.0 MiB page [ 0.107656] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.107681] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.107710] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.107734] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.177381] raid6: neonx8 gen() 1070 MB/s [ 0.245524] raid6: neonx4 gen() 1097 MB/s [ 0.313712] raid6: neonx2 gen() 1022 MB/s [ 0.381796] raid6: neonx1 gen() 903 MB/s [ 0.449918] raid6: int64x8 gen() 745 MB/s [ 0.518013] raid6: int64x4 gen() 825 MB/s [ 0.586116] raid6: int64x2 gen() 706 MB/s [ 0.654216] raid6: int64x1 gen() 526 MB/s [ 0.654241] raid6: using algorithm neonx4 gen() 1097 MB/s [ 0.722315] raid6: .... xor() 792 MB/s, rmw enabled [ 0.722339] raid6: using neon recovery algorithm [ 0.722673] fbcon: Taking over console [ 0.723196] dc_12v: 12000 mV, enabled [ 0.723410] reg-fixed-voltage dc-12v: dc_12v supplying 12000000uV [ 0.723666] vcc_sys: will resolve supply early: vin [ 0.723680] reg-fixed-voltage vcc-sys: Looking up vin-supply from device tree [ 0.723699] vcc_sys: supplied by dc_12v [ 0.723713] dc_12v: could not add device link regulator.2: -ENOENT [ 0.723773] vcc_sys: 5000 mV, enabled [ 0.723941] reg-fixed-voltage vcc-sys: vcc_sys supplying 5000000uV [ 0.724134] vcc_phy: no parameters, enabled [ 0.724294] reg-fixed-voltage vcc-phy-regulator: vcc_phy supplying 0uV [ 0.724942] iommu: Default domain type: Passthrough [ 0.725475] SCSI subsystem initialized [ 0.725722] libata version 3.00 loaded. [ 0.726050] usbcore: registered new interface driver usbfs [ 0.726134] usbcore: registered new interface driver hub [ 0.726202] usbcore: registered new device driver usb [ 0.726946] pps_core: LinuxPPS API ver. 1 registered [ 0.726975] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.727031] PTP clock support registered [ 0.727299] EDAC MC: Ver: 3.0.0 [ 0.728368] Registered efivars operations [ 0.728955] FPGA manager framework [ 0.729139] Advanced Linux Sound Architecture Driver Initialized. [ 0.730123] NetLabel: Initializing [ 0.730150] NetLabel: domain hash size = 128 [ 0.730171] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.730288] NetLabel: unlabeled traffic allowed by default [ 0.730906] clocksource: Switched to clocksource arch_sys_counter [ 0.731230] VFS: Disk quotas dquot_6.6.0 [ 0.731318] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.731604] FS-Cache: Loaded [ 0.742155] NET: Registered PF_INET protocol family [ 0.742446] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.748269] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.748447] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.748500] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.748936] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.749696] TCP: Hash tables configured (established 32768 bind 32768) [ 0.750032] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear) [ 0.750194] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.750366] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.750707] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.751375] RPC: Registered named UNIX socket transport module. [ 0.751417] RPC: Registered udp transport module. [ 0.751439] RPC: Registered tcp transport module. [ 0.751461] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.751490] NET: Registered PF_XDP protocol family [ 0.751526] PCI: CLS 0 bytes, default 64 [ 0.751794] Trying to unpack rootfs image as initramfs... [ 0.764102] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.765244] kvm [1]: IPA Size Limit: 40 bits [ 0.767825] kvm [1]: vgic interrupt IRQ9 [ 0.768024] kvm [1]: Hyp mode initialized successfully [ 0.770220] Initialise system trusted keyrings [ 0.770565] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.781724] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.782751] NFS: Registering the id_resolver key type [ 0.782828] Key type id_resolver registered [ 0.782853] Key type id_legacy registered [ 0.783064] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.783100] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.784564] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [ 0.786715] 9p: Installing v9fs 9p2000 file system support [ 0.861129] xor: measuring software checksum speed [ 0.869296] 8regs : 1221 MB/sec [ 0.877192] 32regs : 1261 MB/sec [ 0.885466] arm64_neon : 1202 MB/sec [ 0.885509] xor: using function: 32regs (1261 MB/sec) [ 0.885546] Key type asymmetric registered [ 0.885569] Asymmetric key parser 'x509' registered [ 1.169321] Freeing initrd memory: 25720K [ 1.191348] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 1.191501] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.191717] io scheduler mq-deadline registered [ 1.191750] io scheduler kyber registered [ 1.191822] io scheduler bfq registered [ 1.197918] phy phy-ff450000.syscon:usb2phy@100.0: Looking up phy-supply from device tree [ 1.197949] phy phy-ff450000.syscon:usb2phy@100.0: Looking up phy-supply property in node /syscon@ff450000/usb2phy@100/otg-port failed [ 1.198231] phy phy-ff450000.syscon:usb2phy@100.1: Looking up phy-supply from device tree [ 1.198251] phy phy-ff450000.syscon:usb2phy@100.1: Looking up phy-supply property in node /syscon@ff450000/usb2phy@100/host-port failed [ 1.219828] dma-pl330 ff1f0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.219885] dma-pl330 ff1f0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 [ 1.230782] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.246555] loop: module loaded [ 1.247598] Loading iSCSI transport class v2.0-870. [ 1.248293] iscsi: registered transport (tcp) [ 1.250690] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 1.250975] db_root: cannot open: /etc/target [ 1.255799] tun: Universal TUN/TAP device driver, 1.6 [ 1.257820] VFIO - User Level meta-driver version: 0.3 [ 1.261465] dwc2 ff580000.usb: Looking up vusb_d-supply from device tree [ 1.261494] dwc2 ff580000.usb: Looking up vusb_d-supply property in node /usb@ff580000 failed [ 1.261527] dwc2 ff580000.usb: supply vusb_d not found, using dummy regulator [ 1.261724] dwc2 ff580000.usb: Looking up vusb_a-supply from device tree [ 1.261742] dwc2 ff580000.usb: Looking up vusb_a-supply property in node /usb@ff580000 failed [ 1.261768] dwc2 ff580000.usb: supply vusb_a not found, using dummy regulator [ 1.261988] dwc2 ff580000.usb: Looking up vbus-supply from device tree [ 1.262007] dwc2 ff580000.usb: Looking up vbus-supply property in node /usb@ff580000 failed [ 1.274536] dwc2 ff580000.usb: DWC OTG Controller [ 1.274597] dwc2 ff580000.usb: new USB bus registered, assigned bus number 1 [ 1.274669] dwc2 ff580000.usb: irq 29, io mem 0xff580000 [ 1.274989] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00 [ 1.275033] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.275069] usb usb1: Product: DWC OTG Controller [ 1.275095] usb usb1: Manufacturer: Linux 6.0.19-02543-g73f2949c2dd9 dwc2_hsotg [ 1.275129] usb usb1: SerialNumber: ff580000.usb [ 1.275829] hub 1-0:1.0: USB hub found [ 1.275897] hub 1-0:1.0: 1 port detected [ 1.276719] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.276755] ehci-pci: EHCI PCI platform driver [ 1.276848] ehci-platform: EHCI generic platform driver [ 1.277257] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.277307] ohci-pci: OHCI PCI platform driver [ 1.277392] ohci-platform: OHCI generic platform driver [ 1.278520] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.278587] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.278794] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 [ 1.278941] xhci-hcd xhci-hcd.0.auto: irq 28, io mem 0xff600000 [ 1.279226] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.279268] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3 [ 1.279316] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 1.279572] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00 [ 1.279615] ehci-platform ff5c0000.usb: EHCI Host Controller [ 1.279616] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.279629] usb usb2: Product: xHCI Host Controller [ 1.279640] ohci-platform ff5d0000.usb: Generic Platform OHCI controller [ 1.279667] usb usb2: Manufacturer: Linux 6.0.19-02543-g73f2949c2dd9 xhci-hcd [ 1.279722] usb usb2: SerialNumber: xhci-hcd.0.auto [ 1.280438] hub 2-0:1.0: USB hub found [ 1.280514] hub 2-0:1.0: 1 port detected [ 1.281058] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.281255] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.00 [ 1.281297] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.281334] usb usb3: Product: xHCI Host Controller [ 1.281360] usb usb3: Manufacturer: Linux 6.0.19-02543-g73f2949c2dd9 xhci-hcd [ 1.281391] usb usb3: SerialNumber: xhci-hcd.0.auto [ 1.282031] hub 3-0:1.0: USB hub found [ 1.282098] hub 3-0:1.0: 1 port detected [ 1.282581] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 4 [ 1.282603] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 5 [ 1.282763] ehci-platform ff5c0000.usb: irq 30, io mem 0xff5c0000 [ 1.282774] usbcore: registered new interface driver usb-storage [ 1.282791] ohci-platform ff5d0000.usb: irq 31, io mem 0xff5d0000 [ 1.284641] i2c_dev: i2c /dev entries driver [ 1.289059] rk808 1-0018: chip id: 0x8050 [ 1.294943] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00 [ 1.295226] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00 [ 1.295271] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.295307] usb usb4: Product: EHCI Host Controller [ 1.295333] usb usb4: Manufacturer: Linux 6.0.19-02543-g73f2949c2dd9 ehci_hcd [ 1.295364] usb usb4: SerialNumber: ff5c0000.usb [ 1.296080] hub 4-0:1.0: USB hub found [ 1.296172] hub 4-0:1.0: 1 port detected [ 1.296387] rk808-regulator rk808-regulator: there is no dvs0 gpio [ 1.296451] rk808-regulator rk808-regulator: there is no dvs1 gpio [ 1.298337] vdd_logic: will resolve supply early: vcc1 [ 1.298355] rk808 1-0018: Looking up vcc1-supply from device tree [ 1.298381] vdd_logic: supplied by vcc_sys [ 1.298397] vcc_sys: could not add device link regulator.4: -ENOENT [ 1.298973] vdd_logic: 712 <--> 1450 mV at 1100 mV, enabled [ 1.300545] vdd_arm: will resolve supply early: vcc2 [ 1.300562] rk808 1-0018: Looking up vcc2-supply from device tree [ 1.300584] vdd_arm: supplied by vcc_sys [ 1.300597] vcc_sys: could not add device link regulator.5: -ENOENT [ 1.300694] vdd_arm: 712 <--> 1450 mV at 1100 mV, enabled [ 1.300957] vcc_ddr: will resolve supply early: vcc3 [ 1.300971] rk808 1-0018: Looking up vcc3-supply from device tree [ 1.300990] vcc_ddr: supplied by vcc_sys [ 1.301002] vcc_sys: could not add device link regulator.6: -ENOENT [ 1.301062] vcc_ddr: at 5000 mV, enabled [ 1.302246] vcc_io: will resolve supply early: vcc4 [ 1.302261] rk808 1-0018: Looking up vcc4-supply from device tree [ 1.302281] vcc_io: supplied by vcc_sys [ 1.302294] vcc_sys: could not add device link regulator.7: -ENOENT [ 1.302358] vcc_io: 3300 mV, enabled [ 1.304370] vcc_18: will resolve supply early: vcc5 [ 1.304390] rk808 1-0018: Looking up vcc5-supply from device tree [ 1.304415] vcc_18: supplied by vcc_io [ 1.304431] vcc_io: could not add device link regulator.8: -ENOENT [ 1.306785] vcc_18: 1800 mV, enabled [ 1.308862] vcc18_emmc: will resolve supply early: vcc5 [ 1.308879] rk808 1-0018: Looking up vcc5-supply from device tree [ 1.308904] vcc18_emmc: supplied by vcc_io [ 1.308923] vcc_io: could not add device link regulator.9: -ENOENT [ 1.311252] vcc18_emmc: 1800 mV, enabled [ 1.313285] vdd_10: will resolve supply early: vcc6 [ 1.313302] rk808 1-0018: Looking up vcc6-supply from device tree [ 1.313326] vdd_10: supplied by vcc_io [ 1.313339] vcc_io: could not add device link regulator.10: -ENOENT [ 1.315654] vdd_10: 1000 mV, enabled [ 1.321184] rockchip-thermal ff250000.tsadc: Missing tshut mode property, using default (cru) [ 1.321242] rockchip-thermal ff250000.tsadc: Missing tshut-polarity property, using default (low) [ 1.323513] dw_wdt ff1a0000.watchdog: No valid TOPs array specified [ 1.325616] cpu cpu0: Looking up cpu-supply from device tree [ 1.327580] cpu cpu0: EM: created perf domain [ 1.330521] sdhci: Secure Digital Host Controller Interface driver [ 1.330566] sdhci: Copyright(c) Pierre Ossman [ 1.331635] Synopsys Designware Multimedia Card Interface Driver [ 1.332302] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.332461] dwmmc_rockchip ff520000.mmc: IDMAC supports 32-bit address mode. [ 1.332506] dwmmc_rockchip ff520000.mmc: Using internal DMA controller. [ 1.332523] dwmmc_rockchip ff520000.mmc: Version ID is 270a [ 1.332568] dwmmc_rockchip ff520000.mmc: DW MMC controller at irq 44,32 bit host data width,256 deep fifo [ 1.332653] dwmmc_rockchip ff520000.mmc: Looking up vmmc-supply from device tree [ 1.332774] dwmmc_rockchip ff520000.mmc: Looking up vqmmc-supply from device tree [ 1.334918] ledtrig-cpu: registered to indicate activity on CPUs [ 1.335982] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 1.336059] hid: raw HID events driver (C) Jiri Kosina [ 1.336165] usbcore: registered new interface driver usbhid [ 1.336178] usbhid: USB HID core driver [ 1.338774] NET: Registered PF_PACKET protocol family [ 1.339130] 9pnet: Installing 9P2000 support [ 1.339203] Key type dns_resolver registered [ 1.339619] registered taskstats version 1 [ 1.339650] Loading compiled-in X.509 certificates [ 1.341825] zswap: loaded using pool zstd/z3fold [ 1.342457] Key type .fscrypt registered [ 1.342483] Key type fscrypt-provisioning registered [ 1.343172] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.00 [ 1.343211] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.343227] usb usb5: Product: Generic Platform OHCI controller [ 1.343239] usb usb5: Manufacturer: Linux 6.0.19-02543-g73f2949c2dd9 ohci_hcd [ 1.343251] usb usb5: SerialNumber: ff5d0000.usb [ 1.343300] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes [ 1.343748] hub 5-0:1.0: USB hub found [ 1.343808] hub 5-0:1.0: 1 port detected [ 1.346347] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 1.360755] vcc_sd: will resolve supply early: vin [ 1.360773] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree [ 1.360789] vcc_sd: supplied by vcc_io [ 1.360797] vcc_io: could not add device link regulator.11: -ENOENT [ 1.360843] vcc_sd: 3300 mV, enabled [ 1.360956] reg-fixed-voltage sdmmc-regulator: vcc_sd supplying 3300000uV [ 1.361228] vcc_host1_5v: will resolve supply early: vin [ 1.361238] reg-fixed-voltage vcc-host1-5v-regulator: Looking up vin-supply from device tree [ 1.361249] vcc_host1_5v: supplied by vcc_sys [ 1.361256] vcc_sys: could not add device link regulator.12: -ENOENT [ 1.361298] vcc_host1_5v: at 5000 mV, enabled [ 1.361422] reg-fixed-voltage vcc-host1-5v-regulator: vcc_host1_5v supplying 0uV [ 1.362937] of_cfs_init [ 1.362994] of_cfs_init: OK [ 1.364214] ALSA device list: [ 1.364238] No soundcards found. [ 1.365687] Freeing unused kernel memory: 3776K [ 1.375008] Run /init as init process [ 1.375038] with arguments: [ 1.375041] /init [ 1.375044] noquiet [ 1.375047] splash [ 1.375049] with environment: [ 1.375051] HOME=/ [ 1.375054] TERM=linux [ 1.375057] BOOT_IMAGE=/boot/vmlinuz-6.0.19-02543-g73f2949c2dd9 [ 1.550993] usb 4-1: new high-speed USB device number 2 using ehci-platform [ 1.575008] usb 1-1: new full-speed USB device number 2 using dwc2 [ 1.724878] usb 4-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01 [ 1.724919] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.724934] usb 4-1: Product: 802.11 n WLAN [ 1.724945] usb 4-1: Manufacturer: Ralink [ 1.724956] usb 4-1: SerialNumber: 1.0 [ 1.785177] usb 1-1: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 [ 1.785220] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.785235] usb 1-1: Product: USB Receiver [ 1.785246] usb 1-1: Manufacturer: Logitech [ 1.788199] input: Logitech USB Receiver as /devices/platform/ff580000.usb/usb1/1-1/1-1:1.0/0003:046D:C534.0001/input/input0 [ 1.851483] gpio-syscon ff100000.syscon:gpio: can't read the data register offset! [ 1.852075] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-ff580000.usb-1/input0 [ 1.861746] input: Logitech USB Receiver Mouse as /devices/platform/ff580000.usb/usb1/1-1/1-1:1.1/0003:046D:C534.0002/input/input1 [ 1.862100] input: Logitech USB Receiver Consumer Control as /devices/platform/ff580000.usb/usb1/1-1/1-1:1.1/0003:046D:C534.0002/input/input2 [ 1.868731] dwmmc_rockchip ff520000.mmc: Busy; trying anyway [ 1.886458] phy phy-ff430000.phy.2: Looking up phy-supply from device tree [ 1.886483] phy phy-ff430000.phy.2: Looking up phy-supply property in node /phy@ff430000 failed [ 1.894649] vcc_sdio: 1800 <--> 3300 mV at 1800 mV, enabled [ 1.905174] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio1-supply from device tree [ 1.905349] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio2-supply from device tree [ 1.906110] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio3-supply from device tree [ 1.906294] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio4-supply from device tree [ 1.907097] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio5-supply from device tree [ 1.907206] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio6-supply from device tree [ 1.907252] rockchip-iodomain ff100000.syscon:io-domains: Looking up pmuio-supply from device tree [ 1.909133] dwmmc_rockchip ff500000.mmc: IDMAC supports 32-bit address mode. [ 1.909188] dwmmc_rockchip ff500000.mmc: Using internal DMA controller. [ 1.909205] dwmmc_rockchip ff500000.mmc: Version ID is 270a [ 1.909252] dwmmc_rockchip ff500000.mmc: DW MMC controller at irq 46,32 bit host data width,256 deep fifo [ 1.909377] dwmmc_rockchip ff500000.mmc: Looking up vmmc-supply from device tree [ 1.916311] dwmmc_rockchip ff500000.mmc: Looking up vqmmc-supply from device tree [ 1.916729] vcc_sdio: ramp_delay not set [ 1.924852] input: Logitech USB Receiver System Control as /devices/platform/ff580000.usb/usb1/1-1/1-1:1.1/0003:046D:C534.0002/input/input3 [ 1.926373] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-ff580000.usb-1/input1 [ 1.926994] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 1.937714] rk808-rtc rk808-rtc: registered as rtc0 [ 1.942836] rk808-rtc rk808-rtc: setting system clock to 2016-01-21T08:50:29 UTC (1453366229) [ 1.969377] vcc_sdio: ramp_delay not set [ 1.973635] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found [ 1.973671] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found [ 1.973778] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock [ 1.973807] rk_gmac-dwmac ff540000.ethernet: Looking up phy-supply from device tree [ 1.973972] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input). [ 1.973995] rk_gmac-dwmac ff540000.ethernet: TX delay(0x24). [ 1.974009] rk_gmac-dwmac ff540000.ethernet: RX delay(0x18). [ 1.974026] rk_gmac-dwmac ff540000.ethernet: integrated PHY? (no). [ 1.974071] rk_gmac-dwmac ff540000.ethernet: cannot get clock clk_mac_speed [ 1.974084] rk_gmac-dwmac ff540000.ethernet: clock input from PHY [ 1.992003] mmc_host mmc1: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0) [ 2.009103] rk_gmac-dwmac ff540000.ethernet: init for RGMII [ 2.015033] rk_gmac-dwmac ff540000.ethernet: User ID: 0x10, Synopsys ID: 0x35 [ 2.015077] rk_gmac-dwmac ff540000.ethernet: DWMAC1000 [ 2.015091] rk_gmac-dwmac ff540000.ethernet: DMA HW capability register supported [ 2.015105] rk_gmac-dwmac ff540000.ethernet: RX Checksum Offload Engine supported [ 2.015118] rk_gmac-dwmac ff540000.ethernet: COE Type 2 [ 2.015130] rk_gmac-dwmac ff540000.ethernet: TX Checksum insertion supported [ 2.015142] rk_gmac-dwmac ff540000.ethernet: Wake-Up On Lan supported [ 2.024442] rk_gmac-dwmac ff540000.ethernet: Normal descriptors [ 2.024475] rk_gmac-dwmac ff540000.ethernet: Ring mode enabled [ 2.024488] rk_gmac-dwmac ff540000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 2.038595] rockchip-vop ff370000.vop: Adding to iommu group 2 [ 2.038646] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA [ 2.119210] rockchip-drm display-subsystem: bound ff370000.vop (ops vop_component_ops [rockchipdrm]) [ 2.119366] dwhdmi-rockchip ff3c0000.hdmi: Looking up avdd-0v9-supply from device tree [ 2.119379] dwhdmi-rockchip ff3c0000.hdmi: Looking up avdd-0v9-supply property in node /hdmi@ff3c0000 failed [ 2.119411] dwhdmi-rockchip ff3c0000.hdmi: supply avdd-0v9 not found, using dummy regulator [ 2.132196] dwhdmi-rockchip ff3c0000.hdmi: Looking up avdd-1v8-supply from device tree [ 2.132238] dwhdmi-rockchip ff3c0000.hdmi: Looking up avdd-1v8-supply property in node /hdmi@ff3c0000 failed [ 2.132287] dwhdmi-rockchip ff3c0000.hdmi: supply avdd-1v8 not found, using dummy regulator [ 2.132825] dwhdmi-rockchip ff3c0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (inno_dw_hdmi_phy2) [ 2.133350] dwmmc_rockchip ff500000.mmc: Successfully tuned phase to 11 [ 2.133411] mmc1: new ultra high speed SDR104 SDHC card at address 5048 [ 2.141934] mmcblk1: mmc1:5048 SK32G 29.7 GiB [ 2.144513] mmcblk1: p1 p2 [ 2.173371] dwhdmi-rockchip ff3c0000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.174151] rockchip-drm display-subsystem: bound ff3c0000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm]) [ 2.176002] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 [ 2.200133] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL) [ 2.200199] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL) [ 2.363682] BTRFS: device label writable devid 1 transid 1358 /dev/mmcblk1p2 scanned by systemd-udevd (176) [ 2.368776] mmc_host mmc0: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000) [ 2.382713] mmc_host mmc0: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0) [ 2.475201] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-ff580000.usb-1/input0 [ 2.496243] Console: switching to colour frame buffer device 240x67 [ 2.526871] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device [ 2.628733] logitech-djreceiver 0003:046D:C534.0002: hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-ff580000.usb-1/input1 [ 2.690021] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 1 [ 2.692029] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2 [ 2.709691] input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/platform/ff580000.usb/usb1/1-1/1-1:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input6 [ 2.713877] hid-generic 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-ff580000.usb-1/input1:1 [ 2.715216] input: Logitech Wireless Mouse PID:4054 Mouse as /devices/platform/ff580000.usb/usb1/1-1/1-1:1.1/0003:046D:C534.0002/0003:046D:4054.0004/input/input11 [ 2.716286] hid-generic 0003:046D:4054.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-ff580000.usb-1/input1:2 [ 2.905233] dwmmc_rockchip ff520000.mmc: Busy; trying anyway [ 2.922467] input: Logitech Wireless Keyboard PID:4023 as /devices/platform/ff580000.usb/usb1/1-1/1-1:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input15 [ 2.923318] logitech-hidpp-device 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-ff580000.usb-1/input1:1 [ 2.966211] input: Logitech Wireless Mouse as /devices/platform/ff580000.usb/usb1/1-1/1-1:1.1/0003:046D:C534.0002/0003:046D:4054.0004/input/input16 [ 2.966762] logitech-hidpp-device 0003:046D:4054.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-ff580000.usb-1/input1:2 [ 3.042995] device-mapper: uevent: version 1.0.3 [ 3.043395] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 3.237778] BTRFS info (device mmcblk1p2): using crc32c (crc32c-generic) checksum algorithm [ 3.237921] BTRFS info (device mmcblk1p2): disk space caching is enabled [ 3.254124] BTRFS info (device mmcblk1p2): enabling ssd optimizations [ 3.254230] BTRFS info (device mmcblk1p2): start tree-log replay [ 3.405344] mmc_host mmc0: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000) [ 3.419010] mmc_host mmc0: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0) [ 3.942599] dwmmc_rockchip ff520000.mmc: Busy; trying anyway [ 4.442708] mmc_host mmc0: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000) [ 4.455008] mmc_host mmc0: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0) [ 4.530261] systemd[1]: System time before build time, advancing clock. [ 4.593496] NET: Registered PF_INET6 protocol family [ 4.614386] Segment Routing with IPv6 [ 4.619868] RPL Segment Routing with IPv6 [ 4.630904] In-situ OAM (IOAM) with IPv6 [ 4.692304] systemd[1]: systemd 249.11-0ubuntu3.7 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 4.710055] systemd[1]: Detected architecture arm64. [ 4.753682] systemd[1]: Hostname set to . [ 4.988235] dwmmc_rockchip ff520000.mmc: Busy; trying anyway [ 5.493774] mmc_host mmc0: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000) [ 5.525840] systemd[1]: Condition check resulted in System Slice being skipped. [ 5.543237] systemd[1]: Queued start job for default target Graphical Interface. [ 5.581291] systemd[1]: Created slice Slice /system/modprobe. [ 5.600380] systemd[1]: Created slice Slice /system/postgresql. [ 5.615478] systemd[1]: Created slice Slice /system/systemd-fsck. [ 5.630424] systemd[1]: Created slice Slice /system/systemd-growfs. [ 5.644166] systemd[1]: Created slice User and Session Slice. [ 5.656936] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.670170] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.682681] systemd[1]: Reached target Remote File Systems. [ 5.694745] systemd[1]: Reached target Slice Units. [ 5.706639] systemd[1]: Reached target Mounting snaps. [ 5.718556] systemd[1]: Reached target Local Verity Protected Volumes. [ 5.730554] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 5.742676] systemd[1]: Listening on LVM2 poll daemon socket. [ 5.758329] systemd[1]: Listening on Syslog Socket. [ 5.769823] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.780825] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 5.792782] systemd[1]: Listening on Journal Audit Socket. [ 5.803993] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.815424] systemd[1]: Listening on Journal Socket. [ 5.827338] systemd[1]: Listening on udev Control Socket. [ 5.838345] systemd[1]: Listening on udev Kernel Socket. [ 5.871324] systemd[1]: Mounting Huge Pages File System... [ 5.888996] systemd[1]: Mounting POSIX Message Queue File System... [ 5.905489] systemd[1]: Mounting Kernel Debug File System... [ 5.916513] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 5.930303] systemd[1]: Starting Journal Service... [ 5.945972] systemd[1]: Finished Availability of block devices. [ 5.987640] systemd[1]: Starting Set the console keyboard layout... [ 6.009516] systemd[1]: Starting Create List of Static Device Nodes... [ 6.027306] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 6.044673] systemd[1]: Starting Load Kernel Module chromeos_pstore... [ 6.061197] systemd[1]: Starting Load Kernel Module configfs... [ 6.119629] systemd[1]: Starting Load Kernel Module drm... [ 6.140390] systemd[1]: Starting Load Kernel Module efi_pstore... [ 6.163829] systemd[1]: Starting Load Kernel Module fuse... [ 6.184336] fuse: init (API version 7.36) [ 6.185412] systemd[1]: Starting Load Kernel Module pstore_blk... [ 6.215553] systemd[1]: Starting Load Kernel Module pstore_zone... [ 6.237731] systemd[1]: Starting Load Kernel Module ramoops... [ 6.255644] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 6.267673] systemd[1]: Starting Load Kernel Modules... [ 6.281949] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.297629] systemd[1]: Starting Coldplug All udev Devices... [ 6.323844] systemd[1]: Started Journal Service. [ 6.326496] BTRFS info (device mmcblk1p2: state M): use zstd compression, level 3 [ 6.615474] systemd-journald[413]: Received client request to flush runtime journal. [ 6.704863] systemd-journald[413]: File /var/log/journal/587cb20f4ee5408e8efd3abd2224b741/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 7.380025] loop0: detected capacity change from 0 to 8 [ 7.390527] loop1: detected capacity change from 0 to 303512 [ 7.407980] loop2: detected capacity change from 0 to 118496 [ 7.431418] loop3: detected capacity change from 0 to 121016 [ 7.444917] loop4: detected capacity change from 0 to 138336 [ 7.462764] loop5: detected capacity change from 0 to 109552 [ 7.480766] loop6: detected capacity change from 0 to 310088 [ 7.501080] loop7: detected capacity change from 0 to 785984 [ 7.517053] loop8: detected capacity change from 0 to 677120 [ 7.539762] loop9: detected capacity change from 0 to 917008 [ 7.546183] loop10: detected capacity change from 0 to 187776 [ 7.564761] loop11: detected capacity change from 0 to 90696 [ 7.585473] loop12: detected capacity change from 0 to 90856 [ 7.604664] loop13: detected capacity change from 0 to 88456 [ 7.623976] loop14: detected capacity change from 0 to 552 [ 7.647297] loop15: detected capacity change from 0 to 824 [ 8.820640] mc: Linux media interface: v0.10 [ 8.831090] lima ff300000.gpu: Looking up mali-supply from device tree [ 8.831113] lima ff300000.gpu: Looking up mali-supply property in node /gpu@ff300000 failed [ 8.847314] lima ff300000.gpu: gp - mali450 version major 0 minor 0 [ 8.847392] lima ff300000.gpu: pp0 - mali450 version major 0 minor 0 [ 8.847455] lima ff300000.gpu: pp1 - mali450 version major 0 minor 0 [ 8.847493] lima ff300000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus [ 8.847503] lima ff300000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus [ 8.853998] videodev: Linux video capture interface: v2.00 [ 8.886337] lima ff300000.gpu: bus rate = 163840000 [ 8.886365] lima ff300000.gpu: mod rate = 163840000 [ 8.886484] lima ff300000.gpu: Looking up mali-supply from device tree [ 8.886504] lima ff300000.gpu: Looking up mali-supply property in node /gpu@ff300000 failed [ 8.886543] lima ff300000.gpu: error -ENODEV: _opp_set_regulators: no regulator (mali) found [ 8.926353] [drm] Initialized lima 1.1.0 20191231 for ff300000.gpu on minor 1 [ 9.050426] Registered IR keymap rc-cec [ 9.062971] rockchip_vdec: module is from the staging directory, the quality is unknown, you have been warned. [ 9.066863] rkvdec ff360000.video-codec: Adding to iommu group 1 [ 9.069880] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA [ 9.070401] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned. [ 9.079273] rc rc0: dw_hdmi as /devices/platform/ff3c0000.hdmi/rc/rc0 [ 9.080473] input: dw_hdmi as /devices/platform/ff3c0000.hdmi/rc/rc0/input17 [ 9.082128] hantro-vpu ff350000.video-codec: Adding to iommu group 0 [ 9.082170] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA [ 9.082859] hantro-vpu ff350000.video-codec: registered rockchip,rk3328-vpu-dec as /dev/video1 [ 9.089914] rk3328-codec ff410000.codec: spk_depop_time use default value. [ 9.308221] input: rk805 pwrkey as /devices/platform/ff160000.i2c/i2c-1/1-0018/rk805-pwrkey/input/input18 [ 9.329151] Registered IR keymap rc-empty [ 9.329246] rc rc1: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc1 [ 9.339105] rc rc1: lirc_dev: driver gpio_ir_recv registered at minor = 0, raw IR receiver, no transmitter [ 9.438354] input: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc1/input19 [ 9.512344] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 9.542225] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.965090] Adding 1048572k swap on /swapfile. Priority:-2 extents:2 across:2053292k FS [ 10.287211] usb 4-1: reset high-speed USB device number 2 using ehci-platform [ 10.523204] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected [ 10.581693] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected [ 10.582308] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 10.591185] usbcore: registered new interface driver rt2800usb [ 10.611147] rt2800usb 4-1:1.0 wlx70f11c1f8436: renamed from wlan0 [ 14.002220] rk_gmac-dwmac ff540000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 14.045471] rk_gmac-dwmac ff540000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet] (irq=POLL) [ 14.055011] rk_gmac-dwmac ff540000.ethernet eth0: No Safety Features support found [ 14.055049] rk_gmac-dwmac ff540000.ethernet eth0: PTP not supported by HW [ 14.056965] rk_gmac-dwmac ff540000.ethernet eth0: configuring for phy/rgmii link mode [ 14.153531] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 14.160124] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 16.587705] systemd-journald[413]: File /var/log/journal/587cb20f4ee5408e8efd3abd2224b741/user-1000.journal corrupted or uncleanly shut down, renaming and replacing. [ 18.932372] loop16: detected capacity change from 0 to 8 [ 20.714484] hdmi-audio-codec hdmi-audio-codec.4.auto: Only one simultaneous stream supported! [ 20.714510] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -22 [ 20.714526] ff000000.i2s-i2s-hifi: __soc_pcm_open() failed (-22) [ 20.725650] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.725677] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.725691] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.725755] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.725765] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.725774] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.725838] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.725847] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.725856] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.725907] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.725915] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.725923] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.726014] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.726023] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.726032] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.753366] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.753407] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.753424] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.753560] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.753582] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.753595] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.753711] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.753731] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.753744] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.753843] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.753860] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.753870] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.754238] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.754311] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.754337] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.768561] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.768593] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.768608] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.769028] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.769055] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.769069] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.769367] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.769398] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.769411] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.769685] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.769710] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.769722] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.770032] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.770054] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.770066] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.775868] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.775902] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.775917] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.776308] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.776338] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.776352] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.776770] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.776805] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.776820] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.784181] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.784219] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.784237] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.784616] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.784643] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.784656] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.786273] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.786305] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.786333] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.786424] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.786437] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.786450] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.786525] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.786535] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.786547] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.786610] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.786620] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.786631] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.786691] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.786700] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.786713] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.787874] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.787906] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.787936] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.788135] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.788162] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.788184] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.788292] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.788309] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.788324] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.788393] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.788406] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.788419] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.788488] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.788498] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.788509] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.789935] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.790004] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.790032] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.790302] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.790330] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.790352] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.790619] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.790643] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.790664] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.800268] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.800618] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.800672] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.803231] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.803264] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.803292] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.813266] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.813295] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.813334] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.813664] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.813694] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.813719] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.814111] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.814140] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.814163] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.814485] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.814512] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.814533] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 20.814862] hdmi-audio-codec hdmi-audio-codec.4.auto: Not able to map channels to speakers (-22) [ 20.815015] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 [ 20.815047] ff000000.i2s-i2s-hifi: ASoC: __soc_pcm_hw_params() failed (-22) [ 25.114973] audit: type=1326 audit(1678915565.420:2): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=1579 comm="cupsd" exe="/snap/cups/873/sbin/cupsd" sig=0 arch=c00000b7 syscall=55 compat=0 ip=0xffffa2d0cee8 code=0x50000 [ 27.418174] audit: type=1326 audit(1678915567.724:3): auid=1000 uid=1000 gid=1000 ses=2 pid=1701 comm="snapd-desktop-i" exe="/snap/snapd-desktop-integration/58/usr/bin/snapd-desktop-integration" sig=0 arch=c00000b7 syscall=274 compat=0 ip=0xffff9ea51a68 code=0x50000 [ 27.956864] audit: type=1326 audit(1678915568.264:4): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=1580 comm="cups-proxyd" exe="/snap/cups/873/sbin/cups-proxyd" sig=0 arch=c00000b7 syscall=274 compat=0 ip=0xffff88fba8c4 code=0x50000 [ 28.603549] audit: type=1326 audit(1678915568.912:5): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=1579 comm="cupsd" exe="/snap/cups/873/sbin/cupsd" sig=0 arch=c00000b7 syscall=55 compat=0 ip=0xffffa2d0cee8 code=0x50000 [ 30.962764] audit: type=1326 audit(1678915571.268:6): auid=1000 uid=1000 gid=1000 ses=2 pid=1878 comm="snapd-desktop-i" exe="/snap/snapd-desktop-integration/58/usr/bin/snapd-desktop-integration" sig=0 arch=c00000b7 syscall=274 compat=0 ip=0xffff840f1a68 code=0x50000 [ 36.343567] logitech-hidpp-device 0003:046D:4054.0004: HID++ 4.5 device connected. [ 36.819903] rfkill: input handler disabled [ 73.599141] logitech-hidpp-device 0003:046D:4023.0003: HID++ 2.0 device connected. [ 105.537096] usb 4-1: USB disconnect, device number 2 [ 111.802982] usb 4-1: new high-speed USB device number 3 using ehci-platform [ 111.959749] usb 4-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [ 111.959794] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 111.959818] usb 4-1: Product: USB 2.0 Hub [ 111.961300] hub 4-1:1.0: USB hub found [ 111.961522] hub 4-1:1.0: 4 ports detected [ 112.351078] usb 4-1.1: new high-speed USB device number 4 using ehci-platform [ 112.560691] usb 4-1.1: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00 [ 112.560737] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 112.560760] usb 4-1.1: Product: 802.11n NIC [ 112.560777] usb 4-1.1: Manufacturer: Realtek [ 112.560795] usb 4-1.1: SerialNumber: 100723CED59D [ 112.645476] r8188eu: module is from the staging directory, the quality is unknown, you have been warned. [ 112.650130] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0) [ 112.679087] EEPROM ID = 0x8129 [ 112.681362] usbcore: registered new interface driver r8188eu [ 112.775842] r8188eu 4-1.1:1.0 wlx100723ced59d: renamed from wlan0 [ 112.853962] r8188eu 4-1.1:1.0: Firmware Version 11, SubVersion 1, Signature 0x88e1 [ 113.283787] MAC Address = 10:07:23:ce:d5:9d [ 138.183061] usb 4-1.2: new high-speed USB device number 5 using ehci-platform [ 138.398125] usb 4-1.2: New USB device found, idVendor=0bda, idProduct=8172, bcdDevice= 2.00 [ 138.398171] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 138.398194] usb 4-1.2: Product: RTL8191S WLAN Adapter [ 138.398212] usb 4-1.2: Manufacturer: Manufacturer Realtek [ 138.398230] usb 4-1.2: SerialNumber: 00e04c000001 [ 138.475783] r8712u: module is from the staging directory, the quality is unknown, you have been warned. [ 138.479231] r8712u: register rtl8712_netdev_ops to netdev_ops [ 138.479258] usb 4-1.2: r8712u: USB_SPEED_HIGH with 4 endpoints [ 138.480031] usb 4-1.2: r8712u: Boot from EFUSE: Autoload OK [ 139.379376] usb 4-1.2: r8712u: CustomerID = 0x0000 [ 139.379418] usb 4-1.2: r8712u: MAC Address from efuse = 00:02:72:36:3e:62 [ 139.379442] usb 4-1.2: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin" [ 139.380824] usbcore: registered new interface driver r8712u [ 139.470266] r8712u 4-1.2:1.0 wlx000272363e62: renamed from wlan0 [ 140.295628] r8712u 4-1.2:1.0 wlx000272363e62: 1 RCR=0x153f00e [ 140.296483] r8712u 4-1.2:1.0 wlx000272363e62: 2 RCR=0x553f00e [ 262.083000] usb 4-1.4: new high-speed USB device number 6 using ehci-platform [ 262.309138] usb 4-1.4: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01 [ 262.309185] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 262.309209] usb 4-1.4: Product: 802.11 n WLAN [ 262.309226] usb 4-1.4: Manufacturer: Ralink [ 262.309244] usb 4-1.4: SerialNumber: 1.0 [ 262.503011] usb 4-1.4: reset high-speed USB device number 6 using ehci-platform [ 262.722254] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected [ 262.776918] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0005 detected [ 262.777476] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 262.919708] rt2800usb 4-1.4:1.0 wlx70f11c1f8436: renamed from wlan0 [ 262.987832] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 262.992790] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 290.689598] usb 4-1.4: USB disconnect, device number 6 [ 292.737597] usb 4-1.2: USB disconnect, device number 5 [ 363.794819] IPv6: ADDRCONF(NETDEV_CHANGE): wlx100723ced59d: link becomes ready [ 483.104128] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 483.104224] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 508.703635] rk_gmac-dwmac ff540000.ethernet eth0: Link is Down [ 509.727833] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 838.201931] IPv6: ADDRCONF(NETDEV_CHANGE): wlx100723ced59d: link becomes ready [ 982.940558] rk_gmac-dwmac ff540000.ethernet eth0: Link is Down [ 984.989720] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 1606.520999] rk_gmac-dwmac ff540000.ethernet eth0: Link is Down [ 1609.596965] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 1624.952184] rk_gmac-dwmac ff540000.ethernet eth0: Link is Down [ 1627.000314] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 1650.554629] rk_gmac-dwmac ff540000.ethernet eth0: Link is Down [ 1652.598769] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 1696.626739] rk_gmac-dwmac ff540000.ethernet eth0: Link is Down [ 1698.674786] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 1721.204557] rk_gmac-dwmac ff540000.ethernet eth0: Link is Down [ 1724.272589] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 2236.613234] usb 4-1.4: new high-speed USB device number 7 using ehci-platform [ 2236.839256] usb 4-1.4: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01 [ 2236.839302] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2236.839325] usb 4-1.4: Product: 802.11 n WLAN [ 2236.839342] usb 4-1.4: Manufacturer: Ralink [ 2236.839360] usb 4-1.4: SerialNumber: 1.0 [ 2237.041204] usb 4-1.4: reset high-speed USB device number 7 using ehci-platform [ 2237.260227] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected [ 2237.314756] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 0005 detected [ 2237.315146] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' [ 2237.446039] rt2800usb 4-1.4:1.0 wlx70f11c1f8436: renamed from wlan0 [ 2237.512274] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 2237.512421] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 2244.548846] usb 4-1.3: new high-speed USB device number 8 using ehci-platform [ 2244.767838] usb 4-1.3: New USB device found, idVendor=0bda, idProduct=8172, bcdDevice= 2.00 [ 2244.767863] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2244.767871] usb 4-1.3: Product: RTL8191S WLAN Adapter [ 2244.767877] usb 4-1.3: Manufacturer: Manufacturer Realtek [ 2244.767883] usb 4-1.3: SerialNumber: 00e04c000001 [ 2244.769134] r8712u: register rtl8712_netdev_ops to netdev_ops [ 2244.769159] usb 4-1.3: r8712u: USB_SPEED_HIGH with 4 endpoints [ 2244.776486] usb 4-1.3: r8712u: Boot from EFUSE: Autoload OK [ 2245.673369] usb 4-1.3: r8712u: CustomerID = 0x0000 [ 2245.673410] usb 4-1.3: r8712u: MAC Address from efuse = 00:02:72:36:3e:62 [ 2245.673435] usb 4-1.3: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin" [ 2245.805302] r8712u 4-1.3:1.0 wlx000272363e62: renamed from wlan0 [ 2246.617426] r8712u 4-1.3:1.0 wlx000272363e62: 1 RCR=0x153f00e [ 2246.618364] r8712u 4-1.3:1.0 wlx000272363e62: 2 RCR=0x553f00e [ 2269.249318] IPv6: ADDRCONF(NETDEV_CHANGE): wlx100723ced59d: link becomes ready [ 2326.742745] wlx70f11c1f8436: authenticate with 9c:3d:cf:27:57:68 [ 2326.761031] wlx70f11c1f8436: bad VHT capabilities, disabling VHT [ 2326.785671] wlx70f11c1f8436: send auth to 9c:3d:cf:27:57:68 (try 1/3) [ 2326.787394] wlx70f11c1f8436: authenticated [ 2326.797156] wlx70f11c1f8436: associating to AP 9c:3d:cf:27:57:68 with corrupt probe response [ 2326.825120] wlx70f11c1f8436: associate with 9c:3d:cf:27:57:68 (try 1/3) [ 2326.829132] wlx70f11c1f8436: RX AssocResp from 9c:3d:cf:27:57:68 (capab=0xc11 status=0 aid=6) [ 2326.850665] wlx70f11c1f8436: associated [ 2327.125524] IPv6: ADDRCONF(NETDEV_CHANGE): wlx70f11c1f8436: link becomes ready [ 2360.257851] IPv6: ADDRCONF(NETDEV_CHANGE): wlx000272363e62: link becomes ready [ 2751.310176] rk_gmac-dwmac ff540000.ethernet eth0: Link is Down [ 2753.358735] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 2775.889982] rk_gmac-dwmac ff540000.ethernet eth0: Link is Down [ 2778.962978] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 3581.807820] rk_gmac-dwmac ff540000.ethernet eth0: Link is Down [ 3650.499304] usb 4-1.2: new high-speed USB device number 9 using ehci-platform [ 3650.712239] usb 4-1.2: New USB device found, idVendor=14cd, idProduct=1212, bcdDevice= 1.00 [ 3650.712263] usb 4-1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=2 [ 3650.712270] usb 4-1.2: Product: Mass Storage Device [ 3650.712275] usb 4-1.2: Manufacturer: Generic [ 3650.712280] usb 4-1.2: SerialNumber: 121220160204 [ 3650.713069] usb-storage 4-1.2:1.0: USB Mass Storage device detected [ 3650.713732] scsi host0: usb-storage 4-1.2:1.0 [ 3650.798546] usbcore: registered new interface driver uas [ 3651.727569] scsi 0:0:0:0: Direct-Access Mass Storage Device 1.00 PQ: 0 ANSI: 0 CCS [ 3651.946502] sd 0:0:0:0: [sda] 123596800 512-byte logical blocks: (63.3 GB/58.9 GiB) [ 3651.948421] sd 0:0:0:0: [sda] Write Protect is off [ 3651.948454] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 3651.949271] sd 0:0:0:0: [sda] No Caching mode page found [ 3651.949298] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 3651.965784] sda: sda1 sda2 sda3 sda4 [ 3651.968198] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 3663.929572] EXT4-fs (sda4): mounted filesystem with ordered data mode. Quota mode: none.