[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[    0.000000]  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000002fd90000 (usable)
[    0.000000]  BIOS-e820: 000000002fd90000 - 000000002fda0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000002fda0000 - 000000002fda1000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000002fda1000 - 0000000030000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] last_pfn = 0x2fd90 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FE0000000 write-back
[    0.000000]   1 base 020000000 mask FF0000000 write-back
[    0.000000]   2 base 02FE00000 mask FFFE00000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009dc00 (usable)
[    0.000000]  modified: 000000000009dc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000d2000 - 00000000000d4000 (reserved)
[    0.000000]  modified: 00000000000dc000 - 00000000000e0000 (reserved)
[    0.000000]  modified: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000002fd90000 (usable)
[    0.000000]  modified: 000000002fd90000 - 000000002fda0000 (ACPI data)
[    0.000000]  modified: 000000002fda0000 - 000000002fda1000 (ACPI NVS)
[    0.000000]  modified: 000000002fda1000 - 0000000030000000 (reserved)
[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-000000002fd90000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 002fc00000 page 2M
[    0.000000]  002fc00000 - 002fd90000 page 4k
[    0.000000] kernel direct mapping tables up to 2fd90000 @ 7000-c000
[    0.000000] RAMDISK: 236f7000 - 23e6bdf3
[    0.000000] ACPI: RSDP 000f88d0 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 2fd9a82c 0005C (v01 FSC    PC       06040000  LTP 00000000)
[    0.000000] ACPI: FACP 2fd9fcd2 000F4 (v03 SiS    671MX    06040000 PTL  000F4240)
[    0.000000] ACPI: DSDT 2fd9c1ba 03AA4 (v01 IEC___ Z17M2.0_ 06040000 MSFT 03000000)
[    0.000000] ACPI: FACS 2fda0fc0 00040
[    0.000000] ACPI: SLIC 2fd9fdc6 00176 (v01 FSC    PC       06040000 PTL_ 00000000)
[    0.000000] ACPI: APIC 2fd9ff3c 00050 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: MCFG 2fd9ff8c 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
[    0.000000] ACPI: HPET 2fd9ffc8 00038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
[    0.000000] ACPI: SSDT 2fd9bca2 00518 (v01  PmRef  Cpu0Cst 00003001 INTL 20050228)
[    0.000000] ACPI: SSDT 2fd9a888 0141A (v01  PmRef    CpuPm 00003000 INTL 20050228)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 765MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 2fd90000
[    0.000000]   low ram: 0 - 2fd90000
[    0.000000]   node 0 low ram: 00000000 - 2fd90000
[    0.000000]   node 0 bootmap 00008000 - 0000dfb4
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 002fd90000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008d9e98]    TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[    0.000000]   #4 [00236f7000 - 0023e6bdf3]          RAMDISK ==> [00236f7000 - 0023e6bdf3]
[    0.000000]   #5 [000009dc00 - 0000100000]    BIOS reserved ==> [000009dc00 - 0000100000]
[    0.000000]   #6 [00008da000 - 00008dd148]              BRK ==> [00008da000 - 00008dd148]
[    0.000000]   #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #8 [0000008000 - 000000e000]          BOOTMAP ==> [0000008000 - 000000e000]
[    0.000000] found SMP MP-table at [c00f8950] f8950
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0002fd90
[    0.000000]   HighMem  0x0002fd90 -> 0x0002fd90
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0002fd90
[    0.000000] On node 0 totalpages: 195881
[    0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3961 pages, LIFO batch:0
[    0.000000]   Normal zone: 1500 pages used for memmap
[    0.000000]   Normal zone: 190388 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10398201 base: 0xfed00000
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[    0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[    0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:b0000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36024 r0 d21320 u4194304
[    0.000000] pcpu-alloc: s36024 r0 d21320 u4194304 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 194349
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=04f7d350-d413-4049-898b-a5cf35b6cf89 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 3919680 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 756556k/783936k available (4673k kernel code, 26564k reserved, 2122k data, 656k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf0590000 - 0xff7fe000   ( 242 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xefd90000   ( 765 MB)
[    0.000000]       .init : 0xc07a3000 - 0xc0847000   ( 656 kB)
[    0.000000]       .data : 0xc0590613 - 0xc07a2e48   (2122 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0590613   (4673 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:256
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2266.630 MHz processor.
[    0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4533.26 BogoMIPS (lpj=9066520)
[    0.004020] Security Framework initialized
[    0.008017] AppArmor: AppArmor initialized
[    0.008024] Mount-cache hash table entries: 512
[    0.008138] Initializing cgroup subsys ns
[    0.008142] Initializing cgroup subsys cpuacct
[    0.008147] Initializing cgroup subsys memory
[    0.008154] Initializing cgroup subsys devices
[    0.008157] Initializing cgroup subsys freezer
[    0.008159] Initializing cgroup subsys net_cls
[    0.008180] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.008182] CPU: L2 cache: 1024K
[    0.008187] mce: CPU supports 6 MCE banks
[    0.008196] CPU0: Thermal monitoring enabled (TM2)
[    0.008200] using mwait in idle threads.
[    0.008204] Performance Events: Core2 events, Intel PMU driver.
[    0.008215] ... version:                2
[    0.008217] ... bit width:              40
[    0.008218] ... generic registers:      2
[    0.008220] ... value mask:             000000ffffffffff
[    0.008222] ... max period:             000000007fffffff
[    0.008224] ... fixed-purpose events:   3
[    0.008225] ... event mask:             0000000700000003
[    0.008230] Checking 'hlt' instruction... OK.
[    0.024892] SMP alternatives: switching to UP code
[    0.032063] Freeing SMP alternatives: 19k freed
[    0.032079] ACPI: Core revision 20090903
[    0.044009] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.044016] ftrace: allocating 21771 entries in 43 pages
[    0.048077] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.048330] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.088919] CPU0: Intel(R) Celeron(R) CPU          570  @ 2.26GHz stepping 01
[    0.092001] Brought up 1 CPUs
[    0.092001] Total of 1 processors activated (4533.26 BogoMIPS).
[    0.092001] CPU0 attaching NULL sched-domain.
[    0.092001] devtmpfs: initialized
[    0.092001] regulator: core version 0.5
[    0.092001] Time: 14:59:07  Date: 04/17/10
[    0.092001] NET: Registered protocol family 16
[    0.092001] EISA bus registered
[    0.092001] ACPI: bus type pci registered
[    0.092001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 3
[    0.092001] PCI: MCFG area at e0000000 reserved in E820
[    0.092001] PCI: Using MMCONFIG for extended config space
[    0.092001] PCI: Using configuration type 1 for base access
[    0.092001] bio: create slab <bio-0> at 0
[    0.092001] ACPI: EC: Look up EC in DSDT
[    0.093433] ACPI: Interpreter enabled
[    0.093442] ACPI: (supports S0 S1 S3 S4 S5)
[    0.093459] ACPI: Using IOAPIC for interrupt routing
[    0.093765] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[    0.097886] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.098820] ACPI: No dock devices found.
[    0.099476] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.099526] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd3ffffff]
[    0.099692] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7]
[    0.099699] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7]
[    0.099705] pci 0000:00:02.5: reg 18 io port: [0x170-0x177]
[    0.099712] pci 0000:00:02.5: reg 1c io port: [0x374-0x377]
[    0.099719] pci 0000:00:02.5: reg 20 io port: [0x1000-0x100f]
[    0.099749] pci 0000:00:02.5: PME# supported from D3cold
[    0.099753] pci 0000:00:02.5: PME# disabled
[    0.099779] pci 0000:00:03.0: reg 10 32bit mmio: [0xd4204000-0xd4204fff]
[    0.099831] pci 0000:00:03.1: reg 10 32bit mmio: [0xd4205000-0xd4205fff]
[    0.099903] pci 0000:00:03.3: reg 10 32bit mmio: [0xd4206000-0xd4206fff]
[    0.099954] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[    0.099958] pci 0000:00:03.3: PME# disabled
[    0.100009] pci 0000:00:04.0: reg 10 32bit mmio: [0xd4407000-0xd440707f]
[    0.100016] pci 0000:00:04.0: reg 14 io port: [0x1080-0x10ff]
[    0.100057] pci 0000:00:04.0: supports D1 D2
[    0.100060] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.100064] pci 0000:00:04.0: PME# disabled
[    0.100097] pci 0000:00:05.0: reg 10 io port: [0x1058-0x105f]
[    0.100104] pci 0000:00:05.0: reg 14 io port: [0x104c-0x104f]
[    0.100111] pci 0000:00:05.0: reg 18 io port: [0x1050-0x1057]
[    0.100117] pci 0000:00:05.0: reg 1c io port: [0x1048-0x104b]
[    0.100124] pci 0000:00:05.0: reg 20 io port: [0x1020-0x102f]
[    0.100153] pci 0000:00:05.0: PME# supported from D3cold
[    0.100157] pci 0000:00:05.0: PME# disabled
[    0.100246] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.100250] pci 0000:00:06.0: PME# disabled
[    0.100346] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.100350] pci 0000:00:07.0: PME# disabled
[    0.100400] pci 0000:00:0f.0: reg 10 32bit mmio: [0xd4200000-0xd4203fff]
[    0.100447] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
[    0.100451] pci 0000:00:0f.0: PME# disabled
[    0.100543] pci 0000:00:1f.0: PME# supported from D0 D3hot D3cold
[    0.100548] pci 0000:00:1f.0: PME# disabled
[    0.100595] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xc0000000-0xcfffffff]
[    0.100600] pci 0000:01:00.0: reg 14 32bit mmio: [0xd4000000-0xd401ffff]
[    0.100606] pci 0000:01:00.0: reg 18 io port: [0x9000-0x907f]
[    0.100637] pci 0000:01:00.0: supports D1 D2
[    0.100675] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[    0.100679] pci 0000:00:01.0: bridge 32bit mmio: [0xd4000000-0xd40fffff]
[    0.100683] pci 0000:00:01.0: bridge 32bit mmio pref: [0xc0000000-0xcfffffff]
[    0.100753] pci 0000:02:00.0: reg 10 64bit mmio: [0xd4100000-0xd410ffff]
[    0.100917] pci 0000:00:06.0: bridge 32bit mmio: [0xd4100000-0xd41fffff]
[    0.100976] pci 0000:00:07.0: bridge io port: [0x3000-0x4fff]
[    0.100980] pci 0000:00:07.0: bridge 32bit mmio: [0xdc000000-0xdfffffff]
[    0.101058] pci_bus 0000:00: on NUMA node 0
[    0.101062] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.107967] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11)
[    0.108078] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11)
[    0.108174] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11)
[    0.108268] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 7 9 10 11)
[    0.108386] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11)
[    0.108478] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11)
[    0.108576] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *7 9 10 11)
[    0.108670] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[    0.108789] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.108791] vgaarb: loaded
[    0.108903] SCSI subsystem initialized
[    0.108966] libata version 3.00 loaded.
[    0.109033] usbcore: registered new interface driver usbfs
[    0.109054] usbcore: registered new interface driver hub
[    0.109076] usbcore: registered new device driver usb
[    0.109188] ACPI: WMI: Mapper loaded
[    0.109190] PCI: Using ACPI for IRQ routing
[    0.109326] NetLabel: Initializing
[    0.109328] NetLabel:  domain hash size = 128
[    0.109329] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.109341] NetLabel:  unlabeled traffic allowed by default
[    0.109374] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.109379] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.112013] Switching to clocksource tsc
[    0.113869] AppArmor: AppArmor Filesystem Enabled
[    0.113892] pnp: PnP ACPI init
[    0.113915] ACPI: bus type pnp registered
[    0.116653] pnp: PnP ACPI: found 10 devices
[    0.116655] ACPI: ACPI bus type pnp unregistered
[    0.116660] PnPBIOS: Disabled by ACPI PNP
[    0.116672] system 00:04: ioport range 0x8000-0x80be has been reserved
[    0.116675] system 00:04: ioport range 0x8100-0x812f has been reserved
[    0.116678] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[    0.116680] system 00:04: ioport range 0xfe00-0xfe00 has been reserved
[    0.116683] system 00:04: ioport range 0x200-0x20f has been reserved
[    0.116685] system 00:04: ioport range 0x260-0x261 has been reserved
[    0.116688] system 00:04: ioport range 0x400-0x40f has been reserved
[    0.116691] system 00:04: iomem range 0xe0000000-0xefffffff has been reserved
[    0.116694] system 00:04: iomem range 0xfec00000-0xfecfffff could not be reserved
[    0.116696] system 00:04: iomem range 0xfee00000-0xfeefffff could not be reserved
[    0.116699] system 00:04: iomem range 0xffb80000-0xffbfffff has been reserved
[    0.116702] system 00:04: iomem range 0xffc00000-0xffc00fff has been reserved
[    0.116704] system 00:04: iomem range 0xffe00000-0xffe00fff has been reserved
[    0.116707] system 00:04: iomem range 0xffe80000-0xffefffff has been reserved
[    0.151395] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.151399] pci 0000:00:01.0:   IO window: 0x9000-0x9fff
[    0.151404] pci 0000:00:01.0:   MEM window: 0xd4000000-0xd40fffff
[    0.151409] pci 0000:00:01.0:   PREFETCH window: 0xc0000000-0xcfffffff
[    0.151415] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02
[    0.151417] pci 0000:00:06.0:   IO window: disabled
[    0.151422] pci 0000:00:06.0:   MEM window: 0xd4100000-0xd41fffff
[    0.151427] pci 0000:00:06.0:   PREFETCH window: disabled
[    0.151433] pci 0000:00:07.0: PCI bridge, secondary bus 0000:4d
[    0.151436] pci 0000:00:07.0:   IO window: 0x3000-0x4fff
[    0.151442] pci 0000:00:07.0:   MEM window: 0xdc000000-0xdfffffff
[    0.151446] pci 0000:00:07.0:   PREFETCH window: 0x00000030000000-0x000000301fffff
[    0.151453] pci 0000:00:1f.0: PCI bridge, secondary bus 0000:04
[    0.151455] pci 0000:00:1f.0:   IO window: disabled
[    0.151460] pci 0000:00:1f.0:   MEM window: disabled
[    0.151464] pci 0000:00:1f.0:   PREFETCH window: disabled
[    0.151480] pci 0000:00:01.0: setting latency timer to 64
[    0.151492]   alloc irq_desc for 16 on node -1
[    0.151495]   alloc kstat_irqs on node -1
[    0.151500] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.151505] pci 0000:00:06.0: setting latency timer to 64
[    0.151514] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.151518] pci 0000:00:07.0: setting latency timer to 64
[    0.151529] pci 0000:00:1f.0: setting latency timer to 64
[    0.151534] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.151536] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.151538] pci_bus 0000:01: resource 0 io:  [0x9000-0x9fff]
[    0.151541] pci_bus 0000:01: resource 1 mem: [0xd4000000-0xd40fffff]
[    0.151543] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[    0.151545] pci_bus 0000:02: resource 1 mem: [0xd4100000-0xd41fffff]
[    0.151548] pci_bus 0000:4d: resource 0 io:  [0x3000-0x4fff]
[    0.151550] pci_bus 0000:4d: resource 1 mem: [0xdc000000-0xdfffffff]
[    0.151552] pci_bus 0000:4d: resource 2 pref mem [0x30000000-0x301fffff]
[    0.151590] NET: Registered protocol family 2
[    0.151672] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.151978] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.152767] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.153379] TCP: Hash tables configured (established 131072 bind 65536)
[    0.153382] TCP reno registered
[    0.153548] NET: Registered protocol family 1
[    0.153656] pci 0000:01:00.0: Boot video device
[    0.153960] cpufreq-nforce2: No nForce2 chipset.
[    0.153993] Scanning for low memory corruption every 60 seconds
[    0.154122] audit: initializing netlink socket (disabled)
[    0.154146] type=2000 audit(1271516346.151:1): initialized
[    0.162945] Trying to unpack rootfs image as initramfs...
[    0.172351] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.177558] VFS: Disk quotas dquot_6.5.2
[    0.177615] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.178114] fuse init (API version 7.13)
[    0.178186] msgmni has been set to 1478
[    0.184343] alg: No test for stdrng (krng)
[    0.184458] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.184462] io scheduler noop registered
[    0.184463] io scheduler anticipatory registered
[    0.184465] io scheduler deadline registered
[    0.184502] io scheduler cfq registered (default)
[    0.184677]   alloc irq_desc for 24 on node -1
[    0.184679]   alloc kstat_irqs on node -1
[    0.184694] pcieport 0000:00:06.0: irq 24 for MSI/MSI-X
[    0.184705] pcieport 0000:00:06.0: setting latency timer to 64
[    0.184838]   alloc irq_desc for 25 on node -1
[    0.184839]   alloc kstat_irqs on node -1
[    0.184847] pcieport 0000:00:07.0: irq 25 for MSI/MSI-X
[    0.184856] pcieport 0000:00:07.0: setting latency timer to 64
[    0.184979]   alloc irq_desc for 26 on node -1
[    0.184981]   alloc kstat_irqs on node -1
[    0.184988] pcieport 0000:00:1f.0: irq 26 for MSI/MSI-X
[    0.184997] pcieport 0000:00:1f.0: setting latency timer to 64
[    0.185065] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.185118] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.186032] ACPI: AC Adapter [ADP0] (on-line)
[    0.186103] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.186840] ACPI: Lid Switch [LID0]
[    0.186886] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.186889] ACPI: Power Button [PWRB]
[    0.186927] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.186931] ACPI: Sleep Button [SLPB]
[    0.186964] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.186966] ACPI: Power Button [PWRF]
[    0.192001] Monitor-Mwait will be used to enter C-1 state
[    0.192064] Monitor-Mwait will be used to enter C-2 state
[    0.192070] Marking TSC unstable due to TSC halts in idle
[    0.192146] processor LNXCPU:00: registered as cooling_device0
[    0.192421] Switching to clocksource hpet
[    0.195637] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.201113] brd: module loaded
[    0.201510] loop: module loaded
[    0.201614] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    0.201766] pata_sis 0000:00:02.5: version 0.5.2
[    0.201793] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.202035] scsi0 : pata_sis
[    0.202119] isapnp: Scanning for PnP cards...
[    0.207719] scsi1 : pata_sis
[    0.208055] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1000 irq 14
[    0.208057] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1008 irq 15
[    0.208110]   alloc irq_desc for 17 on node -1
[    0.208112]   alloc kstat_irqs on node -1
[    0.208119] pata_acpi 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.208153] pata_acpi 0000:00:05.0: PCI INT A disabled
[    0.208437] Fixed MDIO Bus: probed
[    0.208468] PPP generic driver version 2.4.2
[    0.208524] tun: Universal TUN/TAP device driver, 1.6
[    0.208526] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.208594] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.208610]   alloc irq_desc for 22 on node -1
[    0.208612]   alloc kstat_irqs on node -1
[    0.208615] ehci_hcd 0000:00:03.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.208637] ehci_hcd 0000:00:03.3: EHCI Host Controller
[    0.208664] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[    0.208692] ehci_hcd 0000:00:03.3: debug port 1
[    0.208715] ehci_hcd 0000:00:03.3: irq 22, io mem 0xd4206000
[    0.255682] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[    0.255832] usb usb1: configuration #1 chosen from 1 choice
[    0.255859] hub 1-0:1.0: USB hub found
[    0.255869] hub 1-0:1.0: 8 ports detected
[    0.255928] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.255951]   alloc irq_desc for 20 on node -1
[    0.255953]   alloc kstat_irqs on node -1
[    0.255960] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.255980] ohci_hcd 0000:00:03.0: OHCI Host Controller
[    0.256035] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[    0.256057] ohci_hcd 0000:00:03.0: irq 20, io mem 0xd4204000
[    0.354459] usb usb2: configuration #1 chosen from 1 choice
[    0.354491] hub 2-0:1.0: USB hub found
[    0.354505] hub 2-0:1.0: 4 ports detected
[    0.354563]   alloc irq_desc for 21 on node -1
[    0.354566]   alloc kstat_irqs on node -1
[    0.354574] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.354602] ohci_hcd 0000:00:03.1: OHCI Host Controller
[    0.354643] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[    0.354673] ohci_hcd 0000:00:03.1: irq 21, io mem 0xd4205000
[    0.372300] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T40N, JW02, max UDMA/33
[    0.380323] ACPI: Battery Slot [BAT0] (battery present)
[    0.388408] ata1.00: configured for UDMA/33
[    0.456247] usb usb3: configuration #1 chosen from 1 choice
[    0.456275] hub 3-0:1.0: USB hub found
[    0.456289] hub 3-0:1.0: 4 ports detected
[    0.456361] uhci_hcd: USB Universal Host Controller Interface driver
[    0.456475] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.464998] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.467621] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.467634] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.467681] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.467699] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.467721] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.467872] mice: PS/2 mouse device common for all mice
[    0.468042] rtc_cmos 00:02: RTC can wake from S4
[    0.468085] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.468107] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    0.468234] device-mapper: uevent: version 1.0.3
[    0.471300] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.471374] device-mapper: multipath: version 1.1.0 loaded
[    0.471377] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.476338] EISA: Probing bus 0 at eisa.0
[    0.476349] Cannot allocate resource for EISA slot 1
[    0.476355] Cannot allocate resource for EISA slot 3
[    0.476356] Cannot allocate resource for EISA slot 4
[    0.476367] Cannot allocate resource for EISA slot 8
[    0.476369] EISA: Detected 0 cards.
[    0.476479] cpuidle: using governor ladder
[    0.476520] cpuidle: using governor menu
[    0.476875] TCP cubic registered
[    0.477003] NET: Registered protocol family 10
[    0.477365] lo: Disabled Privacy Extensions
[    0.477588] NET: Registered protocol family 17
[    0.477653] Using IPI No-Shortcut mode
[    0.477753] PM: Resume from disk failed.
[    0.477770] registered taskstats version 1
[    0.478049]   Magic number: 6:192:991
[    0.478153] rtc_cmos 00:02: setting system clock to 2010-04-17 14:59:07 UTC (1271516347)
[    0.478156] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.478158] EDD information not available.
[    0.544515] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    0.557825] Freeing initrd memory: 7635k freed
[    0.607021] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    0.737620] isapnp: No Plug & Play device found
[    0.741765] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T40N  JW02 PQ: 0 ANSI: 5
[    0.752941] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.752944] Uniform CD-ROM driver Revision: 3.20
[    0.753080] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    0.753149] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    0.753237] ata2: port disabled. ignoring.
[    0.753260] Freeing unused kernel memory: 656k freed
[    0.753671] Write protecting the kernel text: 4676k
[    0.753692] Write protecting the kernel read-only data: 1840k
[    0.771860] udev: starting version 151
[    0.813486] usb 1-1: configuration #1 chosen from 1 choice
[    0.813794] hub 1-1:1.0: USB hub found
[    0.814131] hub 1-1:1.0: 4 ports detected
[    0.921582] sata_sis 0000:00:05.0: version 1.0
[    0.921599] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.921605] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode
[    0.930211] scsi2 : sata_sis
[    0.939107] scsi3 : sata_sis
[    0.939628] ata3: PATA max UDMA/133 cmd 0x1058 ctl 0x104c bmdma 0x1020 irq 17
[    0.939631] ata4: PATA max UDMA/133 cmd 0x1050 ctl 0x1048 bmdma 0x1028 irq 17
[    1.084270] usb 1-1.3: new high speed USB device using ehci_hcd and address 3
[    1.315245] usb 1-1.3: configuration #1 chosen from 1 choice
[    1.324487] ata3.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133
[    1.324491] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.340458] ata3.00: configured for UDMA/133
[    1.340591] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
[    1.340753] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.341049] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.341089] sd 2:0:0:0: [sda] Write Protect is off
[    1.341091] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.341111] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.341239]  sda:
[    1.388280] usb 1-1.4: new low speed USB device using ehci_hcd and address 4
[    1.484478] usb 1-1.4: configuration #1 chosen from 1 choice
[    1.694660]  sda1 sda2 < sda5 >
[    1.722722] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.728711] usbcore: registered new interface driver hiddev
[    1.731187] input: Microsoft Comfort Optical Mouse 1000 as /devices/pci0000:00/0000:00:03.3/usb1/1-1/1-1.4/1-1.4:1.0/input/input6
[    1.731369] generic-usb 0003:045E:00F6.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Comfort Optical Mouse 1000] on usb-0000:00:03.3-1.4/input0
[    1.731396] usbcore: registered new interface driver usbhid
[    1.731485] usbhid: v2.6:USB HID core driver
[    2.024602] EXT4-fs (sda1): mounted filesystem with ordered data mode
[   16.184781] Adding 2241028k swap on /dev/sda5.  Priority:-1 extents:1 across:2241028k 
[   16.205109] udev: starting version 151
[   16.329703] lp: driver loaded but no devices found
[   16.422519] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   16.437661] sis190 Gigabit Ethernet driver 1.3 loaded.
[   16.437692]   alloc irq_desc for 19 on node -1
[   16.437695]   alloc kstat_irqs on node -1
[   16.437704] sis190 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   16.437718] sis190 0000:00:04.0: setting latency timer to 64
[   16.437741] 0000:00:04.0: Read MAC address from EEPROM
[   16.450231] Linux agpgart interface v0.103
[   16.524066] 0000:00:04.0: Atheros PHY transceiver at address 1.
[   16.653824] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[   16.654000] acpi device:02: registered as cooling_device1
[   16.654085] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input7
[   16.654146] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   16.659718] cfg80211: Calling CRDA to update world regulatory domain
[   16.713071] cfg80211: World regulatory domain updated:
[   16.713075] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   16.713077] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.713080] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   16.713082] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   16.713084] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.713086] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.776279] type=1505 audit(1271516363.797:2):  operation="profile_load" pid=532 name="/sbin/dhclient3"
[   16.776896] type=1505 audit(1271516363.797:3):  operation="profile_load" pid=532 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   16.777225] type=1505 audit(1271516363.797:4):  operation="profile_load" pid=532 name="/usr/lib/connman/scripts/dhclient-script"
[   16.819600] ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   16.819615] ath5k 0000:02:00.0: setting latency timer to 64
[   16.819659] ath5k 0000:02:00.0: registered as 'phy1'
[   17.361109] phy0: Selected rate control algorithm 'minstrel'
[   17.361643] Registered led device: rt73usb-phy0::radio
[   17.361658] Registered led device: rt73usb-phy0::assoc
[   17.361672] Registered led device: rt73usb-phy0::quality
[   17.362326] usbcore: registered new interface driver rt73usb
[   17.384105] udev: renamed network interface wlan0 to wlan2
[   17.476943] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04751/0x200000
[   17.535779] type=1505 audit(1271516364.553:5):  operation="profile_load" pid=655 name="/usr/share/gdm/guest-session/Xsession"
[   17.536104] 0000:00:04.0: Using transceiver at address 1 as default.
[   17.537617] type=1505 audit(1271516364.557:6):  operation="profile_replace" pid=656 name="/sbin/dhclient3"
[   17.538746] type=1505 audit(1271516364.557:7):  operation="profile_replace" pid=656 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   17.539084] type=1505 audit(1271516364.557:8):  operation="profile_replace" pid=656 name="/usr/lib/connman/scripts/dhclient-script"
[   17.546478] ath: EEPROM regdomain: 0x30
[   17.546482] ath: EEPROM indicates we should expect a direct regpair map
[   17.546486] ath: Country alpha2 being used: AM
[   17.546487] ath: Regpair used: 0x30
[   17.547611] type=1505 audit(1271516364.565:9):  operation="profile_load" pid=657 name="/usr/bin/evince"
[   17.548194] phy1: Selected rate control algorithm 'minstrel'
[   17.549241] ath5k phy1: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   17.549250] cfg80211: Calling CRDA for country: AM
[   17.552557] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[   17.567471] cfg80211: Regulatory domain changed to country: AM
[   17.567477] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   17.567480] 	(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   17.567482] 	(5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm)
[   17.567484] 	(5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm)
[   17.568796] 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f08ae000 (IRQ: 19), 00:1e:33:09:41:82
[   17.568799] eth0: RGMII mode.
[   17.568805] eth0: Enabling Auto-negotiation.
[   17.576900] udev: renamed network interface wlan0 to wlan1
[   17.589404] type=1505 audit(1271516364.609:10):  operation="profile_load" pid=657 name="/usr/bin/evince-previewer"
[   17.594435] type=1505 audit(1271516364.613:11):  operation="profile_load" pid=657 name="/usr/bin/evince-thumbnailer"
[   17.600209] agpgart-sis 0000:00:00.0: SiS chipset [1039/0671]
[   17.608804] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000
[   17.608868]   alloc irq_desc for 18 on node -1
[   17.608871]   alloc kstat_irqs on node -1
[   17.608880] HDA Intel 0000:00:0f.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   17.608921] HDA Intel 0000:00:0f.0: setting latency timer to 64
[   17.715432] rt73usb 1-1.3:1.0: firmware: requesting rt73.bin
[   17.722541] hda_codec: ALC268: BIOS auto-probing.
[   17.723012] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0f.0/input/input9
[   17.846885] ADDRCONF(NETDEV_UP): wlan2: link is not ready
[   17.849817] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.933936] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   18.253123] ppdev: user-space parallel port driver
[   21.959970] [drm] Initialized drm 1.1.0 20060810
[   21.962741] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   21.962749] pci 0000:01:00.0: setting latency timer to 64
[   21.963770] [drm] Initialized sis 1.3.0 20070626 for 0000:01:00.0 on minor 0
[   21.964713] agpgart-sis 0000:00:00.0: AGP 3.5 bridge
[   21.964740] agpgart-sis 0000:00:00.0: putting AGP V3 device into 4x mode
[   21.964821] pci 0000:01:00.0: putting AGP V3 device into 4x mode
[   24.509105] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[   27.872020] eth0: auto-negotiating...
[   30.350456] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[   30.355422] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[   30.357889] wlan2: direct probe responded
[   30.357902] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[   30.359746] wlan2: authenticated
[   30.359775] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[   30.362259] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[   30.362264] wlan2: associated
[   30.374915] ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready
[   33.711133] wlan2: disassociated from 00:0c:f6:44:dc:ae (Reason: 16)
[   33.728505] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[   34.820742] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[   34.825286] wlan2: direct probe responded
[   34.825293] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[   34.826889] wlan2: authenticated
[   34.826916] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[   34.830401] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[   34.830406] wlan2: associated
[   37.896019] eth0: auto-negotiating...
[   38.184905] wlan2: disassociated from 00:0c:f6:44:dc:ae (Reason: 16)
[   38.229628] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[   39.483015] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[   39.487719] wlan2: direct probe responded
[   39.487726] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[   39.490677] wlan2: authenticated
[   39.490704] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[   39.496151] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[   39.496155] wlan2: associated
[   41.328014] wlan2: no IPv6 routers present
[   42.850133] wlan2: disassociated from 00:0c:f6:44:dc:ae (Reason: 16)
[   42.864900] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[   43.953659] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[   43.958327] wlan2: direct probe responded
[   43.958334] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[   43.960118] wlan2: authenticated
[   43.960249] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[   43.962945] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[   43.962949] wlan2: associated
[   47.309813] wlan2: disassociated from 00:0c:f6:44:dc:ae (Reason: 16)
[   47.324546] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[   47.920020] eth0: auto-negotiating...
[   48.413679] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[   48.418223] wlan2: direct probe responded
[   48.418230] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[   48.419969] wlan2: authenticated
[   48.419995] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[   48.422440] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[   48.422443] wlan2: associated
[   51.769334] wlan2: disassociated from 00:0c:f6:44:dc:ae (Reason: 16)
[   51.784313] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[   52.874698] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[   52.879242] wlan2: direct probe responded
[   52.879249] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[   52.881108] wlan2: authenticated
[   52.881135] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[   52.884587] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[   52.884592] wlan2: associated
[   56.238975] wlan2: disassociated from 00:0c:f6:44:dc:ae (Reason: 16)
[   56.253961] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[   57.342470] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[   57.347203] wlan2: direct probe responded
[   57.347210] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[   57.348744] wlan2: authenticated
[   57.348770] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[   57.351252] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[   57.351256] wlan2: associated
[   57.944039] eth0: auto-negotiating...
[   60.721627] wlan2: disassociated from 00:0c:f6:44:dc:ae (Reason: 16)
[   60.737735] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[   61.832868] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[   61.838536] wlan2: direct probe responded
[   61.838542] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[   61.840214] wlan2: authenticated
[   61.840244] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[   61.843511] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[   61.843516] wlan2: associated
[   65.198164] wlan2: disassociated from 00:0c:f6:44:dc:ae (Reason: 16)
[   65.213008] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[   66.330383] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[   66.335175] wlan2: direct probe responded
[   66.335181] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[   66.340530] wlan2: authenticated
[   66.340561] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[   66.343924] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[   66.343929] wlan2: associated
[   67.968061] eth0: auto-negotiating...
[   69.697667] wlan2: disassociated from 00:0c:f6:44:dc:ae (Reason: 16)
[   69.712776] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[   70.830405] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[   70.835157] wlan2: direct probe responded
[   70.835164] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[   70.840055] wlan2: authenticated
[   70.840101] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[   70.842432] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[   70.842436] wlan2: associated
[   74.187183] wlan2: disassociated from 00:0c:f6:44:dc:ae (Reason: 16)
[   74.202042] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[   75.290050] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[   75.294597] wlan2: direct probe responded
[   75.294604] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[   75.297056] wlan2: authenticated
[   75.297078] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[   75.301318] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[   75.301322] wlan2: associated
[   76.202353] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[   77.992018] eth0: auto-negotiating...
[   88.016020] eth0: auto-negotiating...
[   93.320365] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[   93.521902] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[   93.720046] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 2)
[   93.724417] wlan2: direct probe responded
[   93.724420] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[   93.726143] wlan2: authenticated
[   93.726161] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[   93.728655] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[   93.728658] wlan2: associated
[   97.075682] wlan2: disassociated from 00:0c:f6:44:dc:ae (Reason: 16)
[   97.091536] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[   98.040030] eth0: auto-negotiating...
[   98.181726] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[   98.188143] wlan2: direct probe responded
[   98.188151] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[   98.190439] wlan2: authenticated
[   98.190467] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[   98.194180] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[   98.194185] wlan2: associated
[  101.745287] wlan2: disassociated from 00:0c:f6:44:dc:ae (Reason: 16)
[  101.760188] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[  102.847571] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[  102.852354] wlan2: direct probe responded
[  102.852360] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[  102.853960] wlan2: authenticated
[  102.853984] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[  102.856472] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[  102.856477] wlan2: associated
[  106.204125] wlan2: disassociated from 00:0c:f6:44:dc:ae (Reason: 16)
[  106.219336] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[  107.307589] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[  107.313998] wlan2: direct probe responded
[  107.314004] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[  107.316242] wlan2: authenticated
[  107.316268] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[  107.319484] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[  107.319489] wlan2: associated
[  108.064040] eth0: auto-negotiating...
[  110.663724] wlan2: disassociated from 00:0c:f6:44:dc:ae (Reason: 16)
[  110.678858] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[  111.763485] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[  111.768890] wlan2: direct probe responded
[  111.768896] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[  111.771249] wlan2: authenticated
[  111.771272] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[  111.774517] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[  111.774522] wlan2: associated
[  115.123270] wlan2: disassociated from 00:0c:f6:44:dc:ae (Reason: 16)
[  115.138118] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[  116.227374] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[  116.232196] wlan2: direct probe responded
[  116.232202] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[  116.234273] wlan2: authenticated
[  116.234299] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[  116.237658] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[  116.237663] wlan2: associated
[  118.088039] eth0: auto-negotiating...
[  119.593540] wlan2: disassociated from 00:0c:f6:44:dc:ae (Reason: 16)
[  119.608390] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[  120.699397] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[  120.896060] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 2)
[  120.902594] wlan2: direct probe responded
[  120.902601] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[  120.904553] wlan2: authenticated
[  120.904579] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[  120.908260] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[  120.908265] wlan2: associated
[  124.262415] wlan2: disassociated from 00:0c:f6:44:dc:ae (Reason: 16)
[  124.277541] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[  125.402670] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[  125.408340] wlan2: direct probe responded
[  125.408347] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[  125.409955] wlan2: authenticated
[  125.409982] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[  125.412453] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[  125.412457] wlan2: associated
[  128.112017] eth0: auto-negotiating...
[  128.761965] wlan2: disassociated from 00:0c:f6:44:dc:ae (Reason: 16)
[  128.777060] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[  129.883071] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[  129.887732] wlan2: direct probe responded
[  129.887739] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[  129.890005] wlan2: authenticated
[  129.890033] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[  129.892480] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[  129.892485] wlan2: associated
[  133.251602] wlan2: disassociated from 00:0c:f6:44:dc:ae (Reason: 16)
[  133.268596] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[  134.369969] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[  134.374783] wlan2: direct probe responded
[  134.374790] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[  134.376367] wlan2: authenticated
[  134.376392] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[  134.379886] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[  134.379891] wlan2: associated
[  137.731252] wlan2: disassociated from 00:0c:f6:44:dc:ae (Reason: 16)
[  137.752117] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[  138.136026] eth0: auto-negotiating...
[  138.845002] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[  138.850529] wlan2: direct probe responded
[  138.850536] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[  138.853671] wlan2: authenticated
[  138.854300] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[  138.858893] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[  138.858897] wlan2: associated
[  139.204675] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[  145.040397] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[  145.243197] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[  145.256740] wlan2: direct probe responded
[  145.256745] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[  145.260223] wlan2: authenticated
[  145.260249] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[  145.262747] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[  145.262753] wlan2: associated
[  148.160057] eth0: auto-negotiating...
[  148.615766] wlan2: disassociated from 00:0c:f6:44:dc:ae (Reason: 16)
[  148.634739] wlan2: deauthenticating from 00:0c:f6:44:dc:ae by local choice (reason=3)
[  149.732714] wlan2: direct probe to AP 00:0c:f6:44:dc:ae (try 1)
[  149.738255] wlan2: direct probe responded
[  149.738261] wlan2: authenticate with AP 00:0c:f6:44:dc:ae (try 1)
[  149.740179] wlan2: authenticated
[  149.740229] wlan2: associate with AP 00:0c:f6:44:dc:ae (try 1)
[  149.742507] wlan2: RX AssocResp from 00:0c:f6:44:dc:ae (capab=0x431 status=0 aid=2)
[  149.742511] wlan2: associated
[  158.220057] eth0: auto-negotiating...
[  168.244057] eth0: auto-negotiating...