X.Org X Server 1.10.1 Release Date: 2011-04-15 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-29-server i686 Ubuntu Current Operating System: Linux avelino-pc 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=e7fd3660-38f3-4e41-a268-252c12eaff97 ro quiet splash vt.handoff=7 Build Date: 19 April 2011 03:33:17PM xorg-server 2:1.10.1-1ubuntu1 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.20.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 20 17:57:34 2011 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (--) PCI:*(0:1:0:0) 1039:6351:1734:1110 rev 16, Mem @ 0xc0000000/268435456, 0xd4000000/131072, I/O @ 0x00009000/128 (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.0.0 (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.0.0 (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.0.0 (==) AIGLX enabled (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.13.0 (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.0.0 (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.2.0 (II) Loading /usr/lib/xorg/modules/drivers/sis671_drv.so (II) Module sis671: vendor="X.Org Foundation" compiled for 1.10.1, module version = 0.8.0 (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620, SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H, SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre), SIS[M]661[F|M]X/[M]741[GX]/[M]760[GX]/[M]761[GX]/662, SIS340, [M]670/[M]770[GX], [M]671/[M]771[GX] (II) SIS: driver for XGI chipsets: Volari Z7 (XG20), Volari V3XT/V5/V8/Duo (XG40/XG42) (--) using VT number 8 (WW) Falling back to old probe method for sis671 (--) Chipset [M]671/[M]771[GX] found (II) Loading /usr/lib/xorg/modules/drivers/sis671_drv.so (II) SIS(0): SiS driver (2006/10/17-1, compiled for X.org 1.10.1.0) (II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer and others (II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml (II) SIS(0): *** for documentation, updates and a Premium Version. (II) SIS(0): RandR rotation support not available in this version. (II) SIS(0): Dynamic modelist support not available in this version. (II) SIS(0): Screen growing support not available in this version. (II) SIS(0): Advanced Xv video blitter not available in this version. (II) SIS(0): Advanced MergedFB support not available in this version. (--) SIS(0): sisfb not found (--) SIS(0): Relocated I/O registers at 0x9000 (==) SIS(0): Depth 24, (--) framebuffer bpp 32 (==) SIS(0): RGB weight 888 (==) SIS(0): Default visual is TrueColor (WW) SIS(0): Could not find/read video BIOS (==) SIS(0): Color HW cursor is enabled (II) SIS(0): Using VRAM command queue, size 512k (==) SIS(0): Hotkey display switching is enabled (==) SIS(0): SiSCtrl utility interface is disabled (II) SIS(0): For information on SiSCtrl, see http://www.winischhofer.at/linuxsispart1.shtml#sisctrl (==) SIS(0): X server will not keep DPI constant for all screen sizes (**) SIS(0): DRI disabled (II) SIS(0): Checking OS for SSE support is not supported in this version of X.org (II) SIS(0): If your OS supports SSE, set the option "UseSSE" to "on". (--) SIS(0): 131072K shared video RAM (UMA) (--) SIS(0): DRAM type: DDR SDRAM (--) SIS(0): Memory clock: 596.582 MHz (--) SIS(0): DRAM bus width: 64 bit (--) SIS(0): Linear framebuffer at 0xC0000000 (--) SIS(0): MMIO registers at 0xD4000000 (size 64K) (--) SIS(0): VideoRAM: 131072 KB (II) SIS(0): Using 130496K of framebuffer memory at offset 0K (--) SIS(0): Detected SiS307LV video bridge (Charter/UMC-1, ID 7; Rev 0xe1) (--) SIS(0): CRT1/VGA detected (--) SIS(0): Detected LCD/plasma panel (1280x800, 11, non-exp., RGB24 [ec2205]) (==) SIS(0): Using gamma correction (1.0, 1.0, 1.0) (II) SIS(0): CRT1 gamma correction is enabled (II) SIS(0): Separate Xv gamma correction for CRT1 is disabled (II) SIS(0): CRT2 gamma correction is enabled (--) SIS(0): Memory bandwidth at 32 bpp is 1193.16 MHz (--) SIS(0): Bandwidth reserved for CRT2 is 85 Mhz (--) SIS(0): Bandwidth available for CRT1 is 1108.16 MHz (--) SIS(0): Detected LCD PanelDelayCompensation 0x06 (for LCD=CRT2) (--) SIS(0): Detected LCD PanelDelayCompensation 0x00 (for LCD=CRT1) (--) SIS(0): 302LV/302ELV: Using EMI 0x680d7038 (LCD) (--) SIS(0): CRT1 DDC supported (--) SIS(0): CRT1 DDC level: 2 (--) SIS(0): CRT1 DDC monitor info: ******************************************* (II) SIS(0): Manufacturer: BNQ Model: 7688 Serial#: 2234 (II) SIS(0): Year: 2005 Week: 16 (II) SIS(0): EDID Version: 1.3 (II) SIS(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V (II) SIS(0): Sync: Separate Composite (II) SIS(0): Max Image Size [cm]: horiz.: 34 vert.: 27 (II) SIS(0): Gamma: 2.20 (II) SIS(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) SIS(0): First detailed timing is preferred mode (II) SIS(0): redX: 0.640 redY: 0.340 greenX: 0.290 greenY: 0.609 (II) SIS(0): blueX: 0.140 blueY: 0.069 whiteX: 0.310 whiteY: 0.330 (II) SIS(0): Supported established timings: (II) SIS(0): 720x400@70Hz (II) SIS(0): 640x480@60Hz (II) SIS(0): 640x480@67Hz (II) SIS(0): 640x480@72Hz (II) SIS(0): 640x480@75Hz (II) SIS(0): 800x600@60Hz (II) SIS(0): 800x600@72Hz (II) SIS(0): 800x600@75Hz (II) SIS(0): 832x624@75Hz (II) SIS(0): 1024x768@60Hz (II) SIS(0): 1024x768@70Hz (II) SIS(0): 1024x768@75Hz (II) SIS(0): 1280x1024@75Hz (II) SIS(0): 1152x864@75Hz (II) SIS(0): Manufacturer's mask: 0 (II) SIS(0): Supported standard timings: (II) SIS(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) SIS(0): #1: hsize: 1280 vsize 1024 refresh: 76 vid: 36993 (II) SIS(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) SIS(0): #3: hsize: 1280 vsize 1024 refresh: 72 vid: 35969 (II) SIS(0): Supported detailed timing: (II) SIS(0): clock: 108.0 MHz Image Size: 376 x 301 mm (II) SIS(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 (II) SIS(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 (II) SIS(0): Supported detailed timing: (II) SIS(0): clock: 25.2 MHz Image Size: 376 x 301 mm (II) SIS(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0 (II) SIS(0): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449 v_border: 0 (II) SIS(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 145 MHz (II) SIS(0): Monitor name: BenQ FP71G (II) SIS(0): EDID (in hex): (II) SIS(0): 98c1f2090100000098c1f20900000000 (II) SIS(0): 8cb21d08b7534500ffffffff00000000 (II) SIS(0): 01000000a871f209b7534500b44f1e08 (II) SIS(0): 80701f0800000000e8c482bff47f1f08 (II) SIS(0): 20000000005d270000000000ba060c08 (II) SIS(0): 007f1f080800000058000000e8c482bf (II) SIS(0): fcd31f0051c582bf01000000ffffffff (II) SIS(0): 93ad1e0800c582bf88c582bfb3070e08 (--) SIS(0): According to DDC size, CRT1 aspect ratio is 1.26:1 (normal) (--) SIS(0): End of CRT1 DDC monitor info ************************************* (--) SIS(0): CRT2 DDC probing failed (--) SIS(0): Failed to read DDC data for CRT2 (II) SIS(0): *************************** CRT1 setup *************************** (==) SIS(0): Min pixel clock is 10 MHz (--) SIS(0): Max pixel clock is 340 MHz (II) SIS(0): Replaced entire mode list with built-in modes (II) SIS(0): Using fake widescreen modes for CRT1 VGA devices (II) SIS(0): [Use option "ForceCRT1VGAAspect" to overrule] (II) SIS(0): Substituting missing CRT1 monitor HSync range by DDC data (II) SIS(0): Substituting missing CRT1 monitor VRefresh range by DDC data (II) SIS(0): "Unknown reason" in the following list means that the mode (II) SIS(0): is not supported on the chipset/bridge/current output device. (II) SIS(0): Monitor0: Using hsync range of 31.00-83.00 kHz (II) SIS(0): Monitor0: Using vrefresh range of 56.00-76.00 Hz (II) SIS(0): Clock range: 10.00 to 340.00 MHz (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (hsync out of range) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (hsync out of range) (II) SIS(0): Not using default mode "640x480" (hsync out of range) (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range) (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range) (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range) (II) SIS(0): Not using default mode "1024x768" (hsync out of range) (II) SIS(0): Not using default mode "1280x1024" (vrefresh out of range) (II) SIS(0): Not using default mode "1280x1024" (hsync out of range) (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size) (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size) (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size) (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size) (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size) (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size) (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size) (II) SIS(0): Not using default mode "1920x1440" (height too large for virtual size) (II) SIS(0): Not using default mode "1920x1440" (height too large for virtual size) (II) SIS(0): Not using default mode "1920x1440" (height too large for virtual size) (II) SIS(0): Not using default mode "1920x1440" (height too large for virtual size) (II) SIS(0): Not using default mode "1920x1440" (height too large for virtual size) (II) SIS(0): Not using default mode "1920x1440" (height too large for virtual size) (II) SIS(0): Not using default mode "2048x1536" (height too large for virtual size) (II) SIS(0): Not using default mode "2048x1536" (height too large for virtual size) (II) SIS(0): Not using default mode "2048x1536" (height too large for virtual size) (II) SIS(0): Not using default mode "2048x1536" (height too large for virtual size) (II) SIS(0): Not using default mode "2048x1536" (height too large for virtual size) (II) SIS(0): Not using default mode "1280x800" (hsync out of range) (II) SIS(0): Modes for CRT1: ************************************************** (**) SIS(0): Virtual size is 2560x1024 (pitch 2560) (**) SIS(0): *Default mode "1280x1024": 135.2 MHz, 80.1 kHz, 75.1 Hz (II) SIS(0): Modeline "1280x1024"x75.1 135.22 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.1 kHz) (**) SIS(0): *Default mode "1280x1024": 107.9 MHz, 63.9 kHz, 59.9 Hz (II) SIS(0): Modeline "1280x1024"x59.9 107.86 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (63.9 kHz) (**) SIS(0): *Default mode "1280x800": 135.2 MHz, 80.1 kHz, 75.1 Hz (II) SIS(0): Modeline "1280x800"x75.1 135.22 1280 1296 1440 1688 800 931 935 1066 +hsync +vsync (80.1 kHz) (**) SIS(0): *Default mode "1280x800": 107.9 MHz, 63.9 kHz, 59.9 Hz (II) SIS(0): Modeline "1280x800"x59.9 107.86 1280 1328 1440 1688 800 931 935 1066 +hsync +vsync (63.9 kHz) (**) SIS(0): *Default mode "1024x768": 78.7 MHz, 60.0 kHz, 75.0 Hz (II) SIS(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (**) SIS(0): *Default mode "1024x768": 75.2 MHz, 56.6 kHz, 70.2 Hz (II) SIS(0): Modeline "1024x768"x70.2 75.17 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.6 kHz) (**) SIS(0): *Default mode "1024x768": 65.1 MHz, 48.5 kHz, 60.1 Hz (II) SIS(0): Modeline "1024x768"x60.1 65.15 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.5 kHz) (**) SIS(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) SIS(0): Modeline "800x600"x75.0 49.52 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (**) SIS(0): *Default mode "800x600": 50.1 MHz, 48.2 kHz, 72.4 Hz (II) SIS(0): Modeline "800x600"x72.4 50.11 800 856 976 1040 600 637 643 666 +hsync +vsync (48.2 kHz) (**) SIS(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) SIS(0): Modeline "800x600"x60.3 39.97 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (**) SIS(0): *Default mode "800x600": 36.1 MHz, 35.2 kHz, 56.3 Hz (II) SIS(0): Modeline "800x600"x56.3 36.06 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (**) SIS(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) SIS(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (**) SIS(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz (II) SIS(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) (**) SIS(0): *Default mode "640x480": 25.1 MHz, 31.3 kHz, 59.7 Hz (II) SIS(0): Modeline "640x480"x59.7 25.06 640 656 752 800 480 490 492 525 -hsync -vsync (31.3 kHz) (II) SIS(0): *************************** CRT2 setup *************************** (--) SIS(0): Memory bandwidth at 32 bpp is 1193.16 MHz (--) SIS(0): Bandwidth reserved for CRT2 is 110 MHz (==) SIS(0): Min pixel clock for CRT2 is 10 MHz (==) SIS(0): Max pixel clock for CRT2 is 109 MHz (II) SIS(0): Replaced entire mode list for CRT2 with built-in modes (II) SIS(0): Correcting missing CRT2 monitor HSync range (II) SIS(0): Correcting missing CRT2 monitor VRefresh range (II) SIS(0): CRT2: Using hsync range of 30.00-80.00 kHz (II) SIS(0): CRT2: Using vrefresh range of 59.00-61.00 Hz (II) SIS(0): CRT2: Using vrefresh value of 71.00 Hz (II) SIS(0): Clock range: 10.00 to 110.00 MHz (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (hsync out of range) (II) SIS(0): Not using default mode "640x480" (hsync out of range) (II) SIS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range) (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range) (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range) (II) SIS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) SIS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) SIS(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan) (II) SIS(0): Not using default mode "1280x1024" (unknown reason) (II) SIS(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan) (II) SIS(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan) (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size) (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size) (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size) (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size) (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size) (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size) (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size) (II) SIS(0): Not using default mode "1920x1440" (height too large for virtual size) (II) SIS(0): Not using default mode "1920x1440" (height too large for virtual size) (II) SIS(0): Not using default mode "1920x1440" (height too large for virtual size) (II) SIS(0): Not using default mode "1920x1440" (height too large for virtual size) (II) SIS(0): Not using default mode "1920x1440" (height too large for virtual size) (II) SIS(0): Not using default mode "1920x1440" (height too large for virtual size) (II) SIS(0): Not using default mode "2048x1536" (height too large for virtual size) (II) SIS(0): Not using default mode "2048x1536" (height too large for virtual size) (II) SIS(0): Not using default mode "2048x1536" (height too large for virtual size) (II) SIS(0): Not using default mode "2048x1536" (height too large for virtual size) (II) SIS(0): Not using default mode "2048x1536" (height too large for virtual size) (II) SIS(0): Not using default mode "1280x800" (bad mode clock/interlace/doublescan) (II) SIS(0): Not using default mode "1280x800" (bad mode clock/interlace/doublescan) (II) SIS(0): Modes for CRT2: ************************************************** (**) SIS(0): Virtual size is 2560x1024 (pitch 2560) (**) SIS(0): *Default mode "1280x800" (1280x800) (**) SIS(0): *Default mode "1024x768" (1024x768) (**) SIS(0): *Default mode "800x600" (800x600) (**) SIS(0): *Default mode "640x480" (640x480) (II) SIS(0): MergedFB: Generating mode list (II) SIS(0): Merged 1280x1024 and 1280x800 to 2560x1024 (75) (**) SIS(0): MergedFB: DPI set to (100, 100) (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.0.0 (II) Loading /usr/lib/xorg/modules/libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.2.1 (--) Depth 24 pixmap format is 32 bpp (II) Loading /usr/lib/xorg/modules/libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.1.0 (II) Loading /usr/lib/xorg/modules/libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.0.0 (II) SIS(0): initializing int10 (II) SIS(0): Primary V_BIOS segment is: 0xc000 (II) SIS(0): VESA BIOS detected (II) SIS(0): Setting MergedFB mode 2560x1024 (II) SIS(0): DGA: MetaMode 2560x1024 not suitable for DGA (WW) SIS(0): No DGA-suitable modes found, disabling DGA (II) SIS(0): Framebuffer from (0,0) to (2559,13047) (II) SIS(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles 8x8 color pattern filled rectangles Solid Lines Dashed Lines Setting up tile and stipple cache: 32 128x128 slots 32 256x256 slots 16 512x512 slots 32 8x8 color pattern slots (--) SIS(0): CPU frequency 1833.00Mhz (II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods: (--) SIS(0): Checked libc memcpy()... 313.5 MiB/s (--) SIS(0): Checked built-in-1 memcpy()... 313.5 MiB/s (--) SIS(0): Checked built-in-2 memcpy()... 80.5 MiB/s (--) SIS(0): Checked MMX memcpy()... 314.1 MiB/s (--) SIS(0): Checked MMX2 memcpy()... 313.6 MiB/s (--) SIS(0): Using MMX method for aligned data transfers to video RAM (--) SIS(0): Using MMX method for unaligned data transfers to video RAM (==) SIS(0): Backing store disabled (==) SIS(0): Silken mouse enabled (==) SIS(0): DPMS enabled (--) SIS(0): Hardware supports one video overlay (II) SIS(0): Using SiS300/315/330/340/350 series HW Xv by default on CRT1 (EE) SIS(0): [MC] AddMap (AGP) failed (II) SIS(0): Default Xv adaptor is Video Overlay (II) SIS(0): SiS Pseudo-Xinerama extension initialized (II) SIS(0): Initialized SISCTRL extension version 0.1 (II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1 (==) RandR enabled (II) AIGLX: Screen 0 is not DRI2 capable (II) AIGLX: Screen 0 is not DRI capable (II) AIGLX: Trying DRI driver /usr/lib/dri/swrast_dri.so (II) AIGLX: Loaded and initialized swrast (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm (II) config/udev: Adding input device Power Button (/dev/input/event3) (**) Power Button: Applying InputClass "evdev keyboard catchall" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.10.0.902, module version = 2.6.0 (II) Using input driver 'evdev' for 'Power Button' (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event3" (--) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (II) XKB: reuse xkmfile /var/lib/xkb/server-8F12297C8ADF2DCAF94655EF02F153CE34CF92F1.xkm (II) config/udev: Adding input device Video Bus (/dev/input/event6) (**) Video Bus: Applying InputClass "evdev keyboard catchall" (II) Using input driver 'evdev' for 'Video Bus' (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event6" (--) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (II) config/udev: Adding input device Power Button (/dev/input/event1) (**) Power Button: Applying InputClass "evdev keyboard catchall" (II) Using input driver 'evdev' for 'Power Button' (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event1" (--) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (II) config/udev: Adding input device Lid Switch (/dev/input/event0) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Sleep Button (/dev/input/event2) (**) Sleep Button: Applying InputClass "evdev keyboard catchall" (II) Using input driver 'evdev' for 'Sleep Button' (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (**) Sleep Button: always reports core events (**) Sleep Button: Device: "/dev/input/event2" (--) Sleep Button: Found keys (II) Sleep Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD) (II) config/udev: Adding input device PS/2+USB Mouse (/dev/input/event5) (**) PS/2+USB Mouse: Applying InputClass "evdev pointer catchall" (II) Using input driver 'evdev' for 'PS/2+USB Mouse' (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (**) PS/2+USB Mouse: always reports core events (**) PS/2+USB Mouse: Device: "/dev/input/event5" (--) PS/2+USB Mouse: Found 9 mouse buttons (--) PS/2+USB Mouse: Found scroll wheel(s) (--) PS/2+USB Mouse: Found relative axes (--) PS/2+USB Mouse: Found x and y relative axes (II) PS/2+USB Mouse: Configuring as mouse (II) PS/2+USB Mouse: Adding scrollwheel support (**) PS/2+USB Mouse: YAxisMapping: buttons 4 and 5 (**) PS/2+USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "PS/2+USB Mouse" (type: MOUSE) (II) PS/2+USB Mouse: initialized for relative axes. (**) PS/2+USB Mouse: (accel) keeping acceleration scheme 1 (**) PS/2+USB Mouse: (accel) acceleration profile 0 (**) PS/2+USB Mouse: (accel) acceleration factor: 2.000 (**) PS/2+USB Mouse: (accel) acceleration threshold: 4 (II) config/udev: Adding input device PS/2+USB Mouse (/dev/input/mouse0) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device HDA SIS966 Mic (/dev/input/event8) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device HDA SIS966 Headphone (/dev/input/event9) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4) (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4" (--) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7) (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.10.0.902, module version = 1.3.99 (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so (**) SynPS/2 Synaptics TouchPad: always reports core events (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15 (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple (--) SynPS/2 Synaptics TouchPad: touchpad found (**) SynPS/2 Synaptics TouchPad: always reports core events (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD) (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75 (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040 (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 (II) SynPS/2 Synaptics TouchPad: failed to open grail, no gesture support (--) SynPS/2 Synaptics TouchPad: touchpad found (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1) (II) No input driver/identifier specified (ignoring) (II) Power Button: Close (II) Unloading evdev (II) Video Bus: Close (II) Unloading evdev (II) Power Button: Close (II) Unloading evdev (II) Sleep Button: Close (II) Unloading evdev (II) PS/2+USB Mouse: Close (II) Unloading evdev (II) AT Translated Set 2 keyboard: Close (II) Unloading evdev (II) Unloading synaptics (WW) SIS(0): xf86UnMapVidMem: cannot find region for [0xb75bf000,0x10000] (WW) SIS(0): xf86UnMapVidMem: cannot find region for [0xa75bf000,0x8000000] ddxSigGiveUp: Closing log