2008-10-26 05:34:30 |
lcn_mustard |
bug |
|
|
added bug |
2008-10-26 05:39:37 |
lcn_mustard |
description |
Binary package hint: xserver-xorg-video-s3virge
Well, first boot with live cd or in hd instalation, only works in safe mode ( low resolution ).
The xorg 7.3 with xserver-xorg-video-s3virge only works in vesa mode and crash with all others configurations. The videos are so slow.
I tried $ dpkg-reconfigure xserver-xorg but didnt work, and that's the copy gerates:
-------------------------------------------------------
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
Boardname "vesa"
Busid "PCI:1:0:0"
Driver "vesa"
Screen 0
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Plug 'n' Play"
Modelname "Plug 'n' Play"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
Gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 640 480
Modes "640x480@60"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
EndSection
Section "Module"
Load "glx"
Load "GLcore"
Load "v4l"
EndSection
Section "ServerFlags"
EndSection
------------------------------------------------------------------
I must remove xorg 7.3 and install 7.1 with corresponding xserver-xorg-video-s3virge,type-handlig of debian etch sources, but I lost dpkg 1.14.13, dpkg-dev 1.14.13 openoffice 2.4 and I can't install any program with breaks in his code neither upgrade dkpg 1.13.25 to 1.14.13.
So how i can install pci ViRGE 86C325 video card with a good driver s3virge and not vesa?
In fact, now the system works very well but I need some programs and I can't install.
Monitor 14" Provew. Motherboard abit kt7a-raid.
Very thanks! Luciana!
My xorg.conf by made manually for me in xorg 7.1:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Module"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
Option "XkbVariant" "abnt2"
Option "XkbOptions" "abnt2"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS1"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "s3virge"
#Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Option "DPMS" "true"
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 49.0 - 85
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
EndSection |
Binary package hint: xserver-xorg-video-s3virge
Well, first boot with live cd or in hd instalation ( Ubuntu 8.04 Hardy Heron ), only works in safe mode ( low resolution ).
The xorg 7.3 with xserver-xorg-video-s3virge only works in vesa mode and crash with all others configurations. The videos are so slow.
I tried $ dpkg-reconfigure xserver-xorg but didnt work, and that's the copy gerates:
-------------------------------------------------------
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
Boardname "vesa"
Busid "PCI:1:0:0"
Driver "vesa"
Screen 0
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Plug 'n' Play"
Modelname "Plug 'n' Play"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
Gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 640 480
Modes "640x480@60"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
EndSection
Section "Module"
Load "glx"
Load "GLcore"
Load "v4l"
EndSection
Section "ServerFlags"
EndSection
------------------------------------------------------------------
I must remove xorg 7.3 and install 7.1 with corresponding xserver-xorg-video-s3virge,type-handlig of debian etch sources, but I lost dpkg 1.14.13, dpkg-dev 1.14.13 openoffice 2.4 and I can't install any program with breaks in his code neither upgrade dkpg 1.13.25 to 1.14.13.
So how i can install pci ViRGE 86C325 video card with a good driver s3virge and not vesa?
In fact, now the system works very well but I need some programs and I can't install.
Monitor 14" Provew. Motherboard abit kt7a-raid. Ubuntu 8.04 Hardy Heron
Very thanks! Luciana!
My xorg.conf by made manually for me in xorg 7.1:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Module"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
Option "XkbVariant" "abnt2"
Option "XkbOptions" "abnt2"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS1"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "s3virge"
#Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Option "DPMS" "true"
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 49.0 - 85
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
EndSection |
|
2008-10-26 05:41:15 |
lcn_mustard |
description |
Binary package hint: xserver-xorg-video-s3virge
Well, first boot with live cd or in hd instalation ( Ubuntu 8.04 Hardy Heron ), only works in safe mode ( low resolution ).
The xorg 7.3 with xserver-xorg-video-s3virge only works in vesa mode and crash with all others configurations. The videos are so slow.
I tried $ dpkg-reconfigure xserver-xorg but didnt work, and that's the copy gerates:
-------------------------------------------------------
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
Boardname "vesa"
Busid "PCI:1:0:0"
Driver "vesa"
Screen 0
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Plug 'n' Play"
Modelname "Plug 'n' Play"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
Gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 640 480
Modes "640x480@60"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
EndSection
Section "Module"
Load "glx"
Load "GLcore"
Load "v4l"
EndSection
Section "ServerFlags"
EndSection
------------------------------------------------------------------
I must remove xorg 7.3 and install 7.1 with corresponding xserver-xorg-video-s3virge,type-handlig of debian etch sources, but I lost dpkg 1.14.13, dpkg-dev 1.14.13 openoffice 2.4 and I can't install any program with breaks in his code neither upgrade dkpg 1.13.25 to 1.14.13.
So how i can install pci ViRGE 86C325 video card with a good driver s3virge and not vesa?
In fact, now the system works very well but I need some programs and I can't install.
Monitor 14" Provew. Motherboard abit kt7a-raid. Ubuntu 8.04 Hardy Heron
Very thanks! Luciana!
My xorg.conf by made manually for me in xorg 7.1:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Module"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
Option "XkbVariant" "abnt2"
Option "XkbOptions" "abnt2"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS1"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "s3virge"
#Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Option "DPMS" "true"
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 49.0 - 85
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
EndSection |
Binary package hint: xserver-xorg-video-s3virge
Well, first boot with live cd or in hd instalation ( Ubuntu 8.04 Hardy Heron ), only works in safe mode ( low resolution ).
The xorg 7.3 with xserver-xorg-video-s3virge only works in vesa mode and system crash with all others configurations and I need reset them. The videos are so slow.
I tried $ dpkg-reconfigure xserver-xorg but didnt work, and that's the copy gerates:
-------------------------------------------------------
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
Boardname "vesa"
Busid "PCI:1:0:0"
Driver "vesa"
Screen 0
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Plug 'n' Play"
Modelname "Plug 'n' Play"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
Gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 640 480
Modes "640x480@60"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
EndSection
Section "Module"
Load "glx"
Load "GLcore"
Load "v4l"
EndSection
Section "ServerFlags"
EndSection
------------------------------------------------------------------
I must remove xorg 7.3 and install 7.1 with corresponding xserver-xorg-video-s3virge,type-handlig of debian etch sources, but I lost dpkg 1.14.13, dpkg-dev 1.14.13 openoffice 2.4 and I can't install any program with breaks in his code neither upgrade dkpg 1.13.25 to 1.14.13.
So how i can install pci ViRGE 86C325 video card with a good driver s3virge and not vesa?
In fact, now the system works very well but I need some programs and I can't install.
Monitor 14" Provew. Motherboard abit kt7a-raid. Ubuntu 8.04 Hardy Heron
Very thanks! Luciana!
My xorg.conf by made manually for me in xorg 7.1:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Module"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
Option "XkbVariant" "abnt2"
Option "XkbOptions" "abnt2"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS1"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "s3virge"
#Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Option "DPMS" "true"
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 49.0 - 85
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
EndSection |
|
2008-10-26 05:41:15 |
lcn_mustard |
title |
xorg crash with xorg 7.3 with s3virge driver |
system crash with xorg 7.3 with s3virge driver |
|
2008-11-07 09:25:54 |
Bryce Harrington |
xserver-xorg-video-s3virge: status |
New |
Incomplete |
|
2008-11-07 22:36:21 |
lcn_mustard |
bug |
|
|
added attachment 'lspci -vvnn_lcnrj' (lspci -vvnn_lcnrj) |
2008-11-07 22:36:21 |
lcn_mustard |
bug |
|
|
added attachment 'var-log-Xorg.0.log_lcnrj' (var-log-Xorg.0.log_lcnrj) |
2008-11-07 22:36:21 |
lcn_mustard |
bug |
|
|
added attachment 'xorg_made_by_lcnrj' (xorg_made_by_lcnrj) |
2008-11-09 00:14:02 |
lcn_mustard |
description |
Binary package hint: xserver-xorg-video-s3virge
Well, first boot with live cd or in hd instalation ( Ubuntu 8.04 Hardy Heron ), only works in safe mode ( low resolution ).
The xorg 7.3 with xserver-xorg-video-s3virge only works in vesa mode and system crash with all others configurations and I need reset them. The videos are so slow.
I tried $ dpkg-reconfigure xserver-xorg but didnt work, and that's the copy gerates:
-------------------------------------------------------
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
Boardname "vesa"
Busid "PCI:1:0:0"
Driver "vesa"
Screen 0
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Plug 'n' Play"
Modelname "Plug 'n' Play"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
Gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 640 480
Modes "640x480@60"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
EndSection
Section "Module"
Load "glx"
Load "GLcore"
Load "v4l"
EndSection
Section "ServerFlags"
EndSection
------------------------------------------------------------------
I must remove xorg 7.3 and install 7.1 with corresponding xserver-xorg-video-s3virge,type-handlig of debian etch sources, but I lost dpkg 1.14.13, dpkg-dev 1.14.13 openoffice 2.4 and I can't install any program with breaks in his code neither upgrade dkpg 1.13.25 to 1.14.13.
So how i can install pci ViRGE 86C325 video card with a good driver s3virge and not vesa?
In fact, now the system works very well but I need some programs and I can't install.
Monitor 14" Provew. Motherboard abit kt7a-raid. Ubuntu 8.04 Hardy Heron
Very thanks! Luciana!
My xorg.conf by made manually for me in xorg 7.1:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Module"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
Option "XkbVariant" "abnt2"
Option "XkbOptions" "abnt2"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS1"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "s3virge"
#Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Option "DPMS" "true"
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 49.0 - 85
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
EndSection |
Binary package hint: xserver-xorg-video-s3virge
Well, first boot with live cd or in hd instalation ( Ubuntu 8.04 Hardy Heron ), only works in safe mode ( low resolution ).
The xorg 7.3 with xserver-xorg-video-s3virge only works in vesa mode and system crash with all others configurations and I need reset them. The videos are so slow.
I tried $ dpkg-reconfigure xserver-xorg but didnt work, and that's the copy gerates:
-------------------------------------------------------
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
Boardname "vesa"
Busid "PCI:1:0:0"
Driver "vesa"
Screen 0
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Plug 'n' Play"
Modelname "Plug 'n' Play"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
Gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 640 480
Modes "640x480@60"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
EndSection
Section "Module"
Load "glx"
Load "GLcore"
Load "v4l"
EndSection
Section "ServerFlags"
EndSection
------------------------------------------------------------------
I must remove xorg 7.3 and install 7.1 with corresponding xserver-xorg-video-s3virge,type-handlig of debian etch sources, but I lost dpkg 1.14.13, dpkg-dev 1.14.13 openoffice 2.4 and I can't install any program with breaks in his code neither upgrade dkpg 1.13.25 to 1.14.13.
So how i can install pci ViRGE 86C325 video card with a good driver s3virge and not vesa?
In fact, now the system works very well but I need some programs and I can't install.
Monitor 14" Provew. Motherboard abit kt7a-raid. Ubuntu 8.04 Hardy Heron
Very thanks! Luciana!
My xorg.conf by made me manually in xorg 7.1:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Module"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
Option "XkbVariant" "abnt2"
Option "XkbOptions" "abnt2"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS1"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "s3virge"
#Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Option "DPMS" "true"
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 49.0 - 85
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
EndSection |
|
2008-11-09 00:18:10 |
lcn_mustard |
bug |
|
|
added attachment 'sudo lspci -vvnn_lcnrj_2' (sudo lspci -vvnn) |
2008-11-09 00:24:19 |
lcn_mustard |
bug |
|
|
added attachment 'sudo_var-log-Xorg.0.log_lcnrj 2' (sudo_var-log-Xorg.0.log_lcnrj_2) |
2009-01-17 10:33:22 |
Bryce Harrington |
description |
Binary package hint: xserver-xorg-video-s3virge
Well, first boot with live cd or in hd instalation ( Ubuntu 8.04 Hardy Heron ), only works in safe mode ( low resolution ).
The xorg 7.3 with xserver-xorg-video-s3virge only works in vesa mode and system crash with all others configurations and I need reset them. The videos are so slow.
I tried $ dpkg-reconfigure xserver-xorg but didnt work, and that's the copy gerates:
-------------------------------------------------------
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
Boardname "vesa"
Busid "PCI:1:0:0"
Driver "vesa"
Screen 0
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Plug 'n' Play"
Modelname "Plug 'n' Play"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
Gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 640 480
Modes "640x480@60"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
EndSection
Section "Module"
Load "glx"
Load "GLcore"
Load "v4l"
EndSection
Section "ServerFlags"
EndSection
------------------------------------------------------------------
I must remove xorg 7.3 and install 7.1 with corresponding xserver-xorg-video-s3virge,type-handlig of debian etch sources, but I lost dpkg 1.14.13, dpkg-dev 1.14.13 openoffice 2.4 and I can't install any program with breaks in his code neither upgrade dkpg 1.13.25 to 1.14.13.
So how i can install pci ViRGE 86C325 video card with a good driver s3virge and not vesa?
In fact, now the system works very well but I need some programs and I can't install.
Monitor 14" Provew. Motherboard abit kt7a-raid. Ubuntu 8.04 Hardy Heron
Very thanks! Luciana!
My xorg.conf by made me manually in xorg 7.1:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Module"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
Option "XkbVariant" "abnt2"
Option "XkbOptions" "abnt2"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS1"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "s3virge"
#Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Option "DPMS" "true"
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 49.0 - 85
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
EndSection |
Binary package hint: xserver-xorg-video-s3virge
Well, first boot with live cd or in hd instalation ( Ubuntu 8.04 Hardy Heron ), only works in safe mode ( low resolution ).
The xorg 7.3 with xserver-xorg-video-s3virge only works in vesa mode and system crash with all others configurations and I need reset them. The videos are so slow.
I tried $ dpkg-reconfigure xserver-xorg but didnt work, and that's the copy gerates:
-------------------------------------------------------
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
Boardname "vesa"
Busid "PCI:1:0:0"
Driver "vesa"
Screen 0
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Plug 'n' Play"
Modelname "Plug 'n' Play"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
Gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 640 480
Modes "640x480@60"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
EndSection
Section "Module"
Load "glx"
Load "GLcore"
Load "v4l"
EndSection
Section "ServerFlags"
EndSection
------------------------------------------------------------------
I must remove xorg 7.3 and install 7.1 with corresponding xserver-xorg-video-s3virge,type-handlig of debian etch sources, but I lost dpkg 1.14.13, dpkg-dev 1.14.13 openoffice 2.4 and I can't install any program with breaks in his code neither upgrade dkpg 1.13.25 to 1.14.13.
So how i can install pci ViRGE 86C325 video card with a good driver s3virge and not vesa?
In fact, now the system works very well but I need some programs and I can't install.
Monitor 14" Provew. Motherboard abit kt7a-raid. Ubuntu 8.04 Hardy Heron
Very thanks! Luciana!
My xorg.conf by made me manually in xorg 7.1:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Module"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
Option "XkbVariant" "abnt2"
Option "XkbOptions" "abnt2"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS1"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "s3virge"
#Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Option "DPMS" "true"
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 49.0 - 85
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
EndSection
[lspci]
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] [1106:0305] (rev 03)
Subsystem: ABIT Computer Corp. KT7/KT7-RAID/KT7A/KT7A-RAID Mainboard [147b:a401]
00:0f.0 VGA compatible controller [0300]: S3 Inc. 86c325 [ViRGE] [5333:5631] (rev 06) (prog-if 00 [VGA controller])
Subsystem: HighPoint Technologies, Inc. HPT370A [1103:0001]
|
|
2009-09-02 23:37:34 |
Bryce Harrington |
tags |
ubuntu-hardy-s3virge-xorg |
hardy ubuntu-hardy-s3virge-xorg |
|
2010-12-11 04:18:18 |
Launchpad Janitor |
xserver-xorg-video-s3virge (Ubuntu): status |
Incomplete |
Expired |
|