[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35-24-generic (buildd@vernadsky) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #42-Ubuntu SMP Thu Dec 2 01:41:57 UTC 2010 (Ubuntu 2.6.35-24.42-generic 2.6.35.8) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000002bef0000 (usable) [ 0.000000] BIOS-e820: 000000002bef0000 - 000000002befb000 (ACPI data) [ 0.000000] BIOS-e820: 000000002befb000 - 000000002bf00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000002bf00000 - 000000002c000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI present. [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x2bef0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 020000000 mask FF8000000 write-back [ 0.000000] 2 base 028000000 mask FFC000000 write-back [ 0.000000] 3 base 02BF00000 mask FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (reserved) [ 0.000000] modified: 0000000000001000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d0000 - 00000000000d8000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000002bef0000 (usable) [ 0.000000] modified: 000000002bef0000 - 000000002befb000 (ACPI data) [ 0.000000] modified: 000000002befb000 - 000000002bf00000 (ACPI NVS) [ 0.000000] modified: 000000002bf00000 - 000000002c000000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] found SMP MP-table at [c00f7d10] f7d10 [ 0.000000] init_memory_mapping: 0000000000000000-000000002bef0000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 002bc00000 page 2M [ 0.000000] 002bc00000 - 002bef0000 page 4k [ 0.000000] kernel direct mapping tables up to 2bef0000 @ 15000-1a000 [ 0.000000] RAMDISK: 20530000 - 20f74000 [ 0.000000] ACPI: RSDP 000f7ce0 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 2bef6133 00028 (v01 PTLTD RSDT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 2befaf8c 00074 (v01 PN800 PTLTW 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 2bef615b 04E31 (v01 FIC sisiP 06040000 MSFT 0100000E) [ 0.000000] ACPI: FACS 2befbfc0 00040 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 702MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 2bef0000 [ 0.000000] low ram: 0 - 2bef0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0002bef0 [ 0.000000] HighMem empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x00000002 [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0002bef0 [ 0.000000] On node 0 totalpages: 179840 [ 0.000000] free_area_init_node: node 0, pgdat c07ffd00, node_mem_map c1001020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3952 pages, LIFO batch:0 [ 0.000000] Normal zone: 1374 pages used for memmap [ 0.000000] Normal zone: 174482 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: No APIC-table, disabling MPS [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] early_res array is doubled to 64 at [16000 - 167ff] [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000 [ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 2c000000 (gap: 2c000000:d3f80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36416 r0 d20928 u4194304 [ 0.000000] pcpu-alloc: s36416 r0 d20928 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 178434 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-24-generic root=UUID=3bd7211c-464f-4628-9386-b802b45124a3 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 3599020 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Subtract (44 early reservations) [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE [ 0.000000] #2 [0000100000 - 00009a2adc] TEXT DATA BSS [ 0.000000] #3 [0020530000 - 0020f74000] RAMDISK [ 0.000000] #4 [00009a3000 - 00009a6143] BRK [ 0.000000] #5 [00000f7d20 - 0000100000] BIOS reserved [ 0.000000] #6 [00000f7d10 - 00000f7d20] MP-table mpf [ 0.000000] #7 [000009f800 - 000009f830] BIOS reserved [ 0.000000] #8 [000009f830 - 00000f7d10] BIOS reserved [ 0.000000] #9 [000009f830 - 000009f830] MP-table mpc [ 0.000000] #10 [0000010000 - 0000011000] TRAMPOLINE [ 0.000000] #11 [0000011000 - 0000015000] ACPI WAKEUP [ 0.000000] #12 [0000015000 - 0000016000] PGTABLE [ 0.000000] #13 [0001000000 - 0001001000] BOOTMEM [ 0.000000] #14 [0001001000 - 0001581000] BOOTMEM [ 0.000000] #15 [0001581000 - 0001581004] BOOTMEM [ 0.000000] #16 [0001581040 - 0001581100] BOOTMEM [ 0.000000] #17 [0001581100 - 0001581144] BOOTMEM [ 0.000000] #18 [0001581180 - 0001584180] BOOTMEM [ 0.000000] #19 [0001584180 - 00015842d0] BOOTMEM [ 0.000000] #20 [0001584300 - 0001584340] BOOTMEM [ 0.000000] #21 [0001584340 - 0001584380] BOOTMEM [ 0.000000] #22 [0001584380 - 00015843c0] BOOTMEM [ 0.000000] #23 [00015843c0 - 0001584400] BOOTMEM [ 0.000000] #24 [0001584400 - 0001584440] BOOTMEM [ 0.000000] #25 [0001584440 - 0001584480] BOOTMEM [ 0.000000] #26 [0001584480 - 00015844c0] BOOTMEM [ 0.000000] #27 [00015844c0 - 0001584500] BOOTMEM [ 0.000000] #28 [0001584500 - 0001584540] BOOTMEM [ 0.000000] #29 [0001584540 - 0001584550] BOOTMEM [ 0.000000] #30 [0001584580 - 0001584590] BOOTMEM [ 0.000000] #31 [00015845c0 - 000158462a] BOOTMEM [ 0.000000] #32 [0001584640 - 00015846aa] BOOTMEM [ 0.000000] #33 [0001800000 - 000180e000] BOOTMEM [ 0.000000] #34 [00015866c0 - 00015866c4] BOOTMEM [ 0.000000] #35 [0001586700 - 0001586704] BOOTMEM [ 0.000000] #36 [0001586740 - 0001586744] BOOTMEM [ 0.000000] #37 [0001586780 - 0001586784] BOOTMEM [ 0.000000] #38 [00015867c0 - 0001586870] BOOTMEM [ 0.000000] #39 [0001586880 - 0001586928] BOOTMEM [ 0.000000] #40 [0001586940 - 000158a940] BOOTMEM [ 0.000000] #41 [000158a940 - 000160a940] BOOTMEM [ 0.000000] #42 [000160a940 - 000164a940] BOOTMEM [ 0.000000] #43 [000180e000 - 0001b7caac] BOOTMEM [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 689948k/719808k available (4931k kernel code, 29412k reserved, 2333k data, 688k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xec6f0000 - 0xff7fe000 ( 305 MB) [ 0.000000] lowmem : 0xc0000000 - 0xebef0000 ( 702 MB) [ 0.000000] .init : 0xc0819000 - 0xc08c5000 ( 688 kB) [ 0.000000] .data : 0xc05d0ebe - 0xc08184e8 (2333 kB) [ 0.000000] .text : 0xc0100000 - 0xc05d0ebe (4931 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1496.031 MHz processor. [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 2992.06 BogoMIPS (lpj=5984124) [ 0.004016] pid_max: default: 32768 minimum: 301 [ 0.004043] Security Framework initialized [ 0.004081] AppArmor: AppArmor initialized [ 0.004085] Yama: becoming mindful. [ 0.004186] Mount-cache hash table entries: 512 [ 0.004389] Initializing cgroup subsys ns [ 0.004396] Initializing cgroup subsys cpuacct [ 0.004403] Initializing cgroup subsys memory [ 0.004417] Initializing cgroup subsys devices [ 0.004422] Initializing cgroup subsys freezer [ 0.004426] Initializing cgroup subsys net_cls [ 0.004475] mce: CPU supports 5 MCE banks [ 0.004498] Performance Events: [ 0.004502] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.004505] no hardware sampling interrupt available. [ 0.004508] p6 PMU driver. [ 0.004523] ... version: 0 [ 0.004526] ... bit width: 32 [ 0.004529] ... generic registers: 2 [ 0.004532] ... value mask: 00000000ffffffff [ 0.004535] ... max period: 000000007fffffff [ 0.004538] ... fixed-purpose events: 0 [ 0.004541] ... event mask: 0000000000000003 [ 0.006030] SMP alternatives: switching to UP code [ 0.018198] Freeing SMP alternatives: 24k freed [ 0.018224] ACPI: Core revision 20100428 [ 0.026671] ACPI: setting ELCR to 0200 (from 0c80) [ 0.028014] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.028023] ftrace: allocating 21756 entries in 43 pages [ 0.032160] weird, boot CPU (#0) not listed by the BIOS. [ 0.032166] SMP motherboard not detected. [ 0.032170] Local APIC not detected. Using dummy APIC emulation. [ 0.032172] SMP disabled [ 0.032420] Brought up 1 CPUs [ 0.032426] Total of 1 processors activated (2992.06 BogoMIPS). [ 0.036284] devtmpfs: initialized [ 0.038901] regulator: core version 0.5 [ 0.038943] Time: 14:28:57 Date: 05/09/11 [ 0.039007] NET: Registered protocol family 16 [ 0.039199] EISA bus registered [ 0.039213] ACPI: bus type pci registered [ 0.040344] PCI: PCI BIOS revision 2.10 entry at 0xfd90c, last bus=1 [ 0.040349] PCI: Using configuration type 1 for base access [ 0.041830] bio: create slab at 0 [ 0.042831] ACPI: EC: Look up EC in DSDT [ 0.249597] ACPI: Interpreter enabled [ 0.249607] ACPI: (supports S0 S3 S4 S5) [ 0.249635] ACPI: Using PIC for interrupt routing [ 0.256990] ACPI: Power Resource [FN10] (off) [ 0.257051] ACPI: Power Resource [FN11] (off) [ 0.257243] ACPI: No dock devices found. [ 0.257251] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.257408] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.257679] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.257684] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.257688] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.257692] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000c3fff] (ignored) [ 0.257696] pci_root PNP0A03:00: host bridge window [mem 0x000c4000-0x000c7fff] (ignored) [ 0.257700] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000cbfff] (ignored) [ 0.257704] pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored) [ 0.257709] pci_root PNP0A03:00: host bridge window [mem 0x30000000-0xfff7ffff] (ignored) [ 0.257742] pci 0000:00:00.0: reg 10: [mem 0xd8000000-0xdfffffff pref] [ 0.258076] pci 0000:00:01.0: supports D1 [ 0.258112] pci 0000:00:06.0: reg 10: [mem 0xd0002000-0xd0003fff] [ 0.258196] pci 0000:00:0c.0: reg 10: [mem 0x00000000-0x00000fff] [ 0.258217] pci 0000:00:0c.0: supports D1 D2 [ 0.258221] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.258227] pci 0000:00:0c.0: PME# disabled [ 0.258280] pci 0000:00:10.0: reg 20: [io 0x1020-0x103f] [ 0.258309] pci 0000:00:10.0: supports D1 D2 [ 0.258313] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.258318] pci 0000:00:10.0: PME# disabled [ 0.258367] pci 0000:00:10.1: reg 20: [io 0x1040-0x105f] [ 0.258396] pci 0000:00:10.1: supports D1 D2 [ 0.258399] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.258405] pci 0000:00:10.1: PME# disabled [ 0.258437] pci 0000:00:10.3: reg 10: [mem 0xd0000000-0xd00000ff] [ 0.258484] pci 0000:00:10.3: supports D1 D2 [ 0.258488] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.258493] pci 0000:00:10.3: PME# disabled [ 0.258560] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.258570] pci 0000:00:11.0: quirk: [io 0x4000-0x407f] claimed by vt8235 PM [ 0.258575] pci 0000:00:11.0: quirk: [io 0x8100-0x810f] claimed by vt8235 SMB [ 0.258644] pci 0000:00:11.1: reg 20: [io 0x1000-0x100f] [ 0.258709] pci 0000:00:11.5: reg 10: [io 0x1400-0x14ff] [ 0.258758] pci 0000:00:11.5: supports D1 D2 [ 0.258791] pci 0000:00:11.6: reg 10: [io 0x1800-0x18ff] [ 0.258870] pci 0000:00:12.0: reg 10: [io 0x1c00-0x1cff] [ 0.258878] pci 0000:00:12.0: reg 14: [mem 0xd0000400-0xd00004ff] [ 0.258922] pci 0000:00:12.0: supports D1 D2 [ 0.258925] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.258931] pci 0000:00:12.0: PME# disabled [ 0.259006] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf3ffffff pref] [ 0.259014] pci 0000:01:00.0: reg 14: [mem 0xd1000000-0xd1ffffff] [ 0.259036] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.259058] pci 0000:01:00.0: supports D1 D2 [ 0.259100] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.259106] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.259113] pci 0000:00:01.0: bridge window [mem 0xd1000000-0xd1ffffff] [ 0.259119] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf3ffffff pref] [ 0.259166] pci_bus 0000:00: on NUMA node 0 [ 0.259173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.269272] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *7, disabled. [ 0.269412] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *10, disabled. [ 0.269547] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled. [ 0.269677] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *11, disabled. [ 0.269852] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7) [ 0.270033] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10) [ 0.270181] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11) *0, disabled. [ 0.270367] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11) [ 0.270431] HEST: Table is not found! [ 0.270594] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.270598] vgaarb: loaded [ 0.270860] SCSI subsystem initialized [ 0.270983] libata version 3.00 loaded. [ 0.271073] usbcore: registered new interface driver usbfs [ 0.271092] usbcore: registered new interface driver hub [ 0.271137] usbcore: registered new device driver usb [ 0.271349] ACPI: WMI: Mapper loaded [ 0.271353] PCI: Using ACPI for IRQ routing [ 0.271361] PCI: pci_cache_line_size set to 64 bytes [ 0.271443] reserve RAM buffer: 0000000000002000 - 000000000000ffff [ 0.271448] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.271452] reserve RAM buffer: 000000002bef0000 - 000000002bffffff [ 0.271630] NetLabel: Initializing [ 0.271634] NetLabel: domain hash size = 128 [ 0.271636] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.271658] NetLabel: unlabeled traffic allowed by default [ 0.271734] Switching to clocksource tsc [ 0.285996] AppArmor: AppArmor Filesystem Enabled [ 0.286049] pnp: PnP ACPI init [ 0.286097] ACPI: bus type pnp registered [ 0.287053] ERROR: Unable to locate IOAPIC for GSI 8 [ 0.287203] ERROR: Unable to locate IOAPIC for GSI 13 [ 0.287916] ERROR: Unable to locate IOAPIC for GSI 12 [ 0.287997] ERROR: Unable to locate IOAPIC for GSI 1 [ 0.289145] pnp: PnP ACPI: found 9 devices [ 0.289149] ACPI: ACPI bus type pnp unregistered [ 0.289157] PnPBIOS: Disabled by ACPI PNP [ 0.289183] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.289188] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.289193] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.289197] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.289202] system 00:05: [mem 0xfff00000-0xffffffff] could not be reserved [ 0.289206] system 00:05: [mem 0xffee0000-0xffefffff] has been reserved [ 0.289211] system 00:05: [mem 0xff780000-0xff7fffff] has been reserved [ 0.289222] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.289227] system 00:06: [io 0xfe10-0xfe11] has been reserved [ 0.289231] system 00:06: [io 0xfe00] has been reserved [ 0.289235] system 00:06: [io 0x4000-0x407f] has been reserved [ 0.289240] system 00:06: [io 0x8100-0x811f] could not be reserved [ 0.326130] pci 0000:00:0c.0: BAR 15: assigned [mem 0x2c000000-0x2fffffff pref] [ 0.326136] pci 0000:00:0c.0: BAR 16: assigned [mem 0x30000000-0x33ffffff] [ 0.326141] pci 0000:00:0c.0: BAR 0: assigned [mem 0x34000000-0x34000fff] [ 0.326150] pci 0000:00:0c.0: BAR 0: set to [mem 0x34000000-0x34000fff] (PCI address [0x34000000-0x34000fff] [ 0.326155] pci 0000:00:0c.0: BAR 13: assigned [io 0x2000-0x20ff] [ 0.326160] pci 0000:00:0c.0: BAR 14: assigned [io 0x2400-0x24ff] [ 0.326165] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x10000) [ 0.326170] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.326173] pci 0000:00:01.0: bridge window [io disabled] [ 0.326180] pci 0000:00:01.0: bridge window [mem 0xd1000000-0xd1ffffff] [ 0.326186] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf3ffffff pref] [ 0.326194] pci 0000:00:0c.0: CardBus bridge to [bus 02-05] [ 0.326198] pci 0000:00:0c.0: bridge window [io 0x2000-0x20ff] [ 0.326204] pci 0000:00:0c.0: bridge window [io 0x2400-0x24ff] [ 0.326211] pci 0000:00:0c.0: bridge window [mem 0x2c000000-0x2fffffff pref] [ 0.326217] pci 0000:00:0c.0: bridge window [mem 0x30000000-0x33ffffff] [ 0.326241] pci 0000:00:01.0: setting latency timer to 64 [ 0.326624] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 0.326630] PCI: setting IRQ 10 as level-triggered [ 0.326638] pci 0000:00:0c.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 0.326648] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.326652] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.326656] pci_bus 0000:01: resource 1 [mem 0xd1000000-0xd1ffffff] [ 0.326660] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf3ffffff pref] [ 0.326664] pci_bus 0000:02: resource 0 [io 0x2000-0x20ff] [ 0.326667] pci_bus 0000:02: resource 1 [io 0x2400-0x24ff] [ 0.326671] pci_bus 0000:02: resource 2 [mem 0x2c000000-0x2fffffff pref] [ 0.326675] pci_bus 0000:02: resource 3 [mem 0x30000000-0x33ffffff] [ 0.326753] NET: Registered protocol family 2 [ 0.326868] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.327294] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.329540] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.330792] TCP: Hash tables configured (established 131072 bind 65536) [ 0.330799] TCP reno registered [ 0.330809] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.330854] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.331095] NET: Registered protocol family 1 [ 0.331150] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.331246] pci 0000:01:00.0: Boot video device [ 0.331251] PCI: CLS 32 bytes, default 64 [ 0.331608] cpufreq-nforce2: No nForce2 chipset. [ 0.331650] Scanning for low memory corruption every 60 seconds [ 0.331994] audit: initializing netlink socket (disabled) [ 0.332022] type=2000 audit(1304951337.328:1): initialized [ 0.348001] Trying to unpack rootfs image as initramfs... [ 0.364982] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.376691] VFS: Disk quotas dquot_6.5.2 [ 0.376885] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.378123] fuse init (API version 7.14) [ 0.378303] msgmni has been set to 1347 [ 0.385134] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.385142] io scheduler noop registered [ 0.385145] io scheduler deadline registered [ 0.385183] io scheduler cfq registered (default) [ 0.385416] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.385450] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.386512] ACPI: AC Adapter [ACAD] (on-line) [ 0.386656] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.386667] ACPI: Power Button [PWRB] [ 0.386735] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.386785] ACPI: Lid Switch [LID] [ 0.386857] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.386862] ACPI: Power Button [PWRF] [ 0.387048] ACPI: Fan [FN1] (off) [ 0.387181] ACPI: Fan [FN2] (off) [ 0.387362] ACPI: acpi_idle registered with cpuidle [ 0.387492] Marking TSC unstable due to TSC halts in idle [ 0.396452] Switching to clocksource acpi_pm [ 0.430239] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.430259] ACPI: Thermal Zone [THRM] (40 C) [ 0.430503] ERST: Table is not found! [ 0.430824] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.433108] brd: module loaded [ 0.433932] loop: module loaded [ 0.434469] pata_acpi 0000:00:11.1: power state changed by ACPI to D0 [ 0.434515] pata_acpi 0000:00:11.1: power state changed by ACPI to D0 [ 0.434838] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7 [ 0.434843] PCI: setting IRQ 7 as level-triggered [ 0.434852] pata_acpi 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 7 (level, low) -> IRQ 7 [ 0.434860] pata_acpi 0000:00:11.1: VIA VLink IRQ fixup, from 0 to 7 [ 0.434953] pata_acpi 0000:00:11.1: PCI INT A disabled [ 0.435474] Fixed MDIO Bus: probed [ 0.435539] PPP generic driver version 2.4.2 [ 0.435654] tun: Universal TUN/TAP device driver, 1.6 [ 0.435657] tun: (C) 1999-2004 Max Krasnyansky [ 0.435785] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.440242] isapnp: Scanning for PnP cards... [ 0.452064] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.452072] PCI: setting IRQ 11 as level-triggered [ 0.452082] ehci_hcd 0000:00:10.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.452126] ehci_hcd 0000:00:10.3: EHCI Host Controller [ 0.452292] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 [ 0.452357] ehci_hcd 0000:00:10.3: irq 11, io mem 0xd0000000 [ 0.503922] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00 [ 0.504286] hub 1-0:1.0: USB hub found [ 0.504296] hub 1-0:1.0: 4 ports detected [ 0.504430] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.504460] uhci_hcd: USB Universal Host Controller Interface driver [ 0.504567] uhci_hcd 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 7 (level, low) -> IRQ 7 [ 0.504583] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.504660] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 0.504700] uhci_hcd 0000:00:10.0: irq 7, io base 0x00001020 [ 0.504907] hub 2-0:1.0: USB hub found [ 0.504914] hub 2-0:1.0: 2 ports detected [ 0.505006] uhci_hcd 0000:00:10.1: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 0.505017] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.505078] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 0.505109] uhci_hcd 0000:00:10.1: irq 10, io base 0x00001040 [ 0.505321] hub 3-0:1.0: USB hub found [ 0.505330] hub 3-0:1.0: 2 ports detected [ 0.505502] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.506606] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.506999] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.507015] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.507073] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.507104] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.507142] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.507331] mice: PS/2 mouse device common for all mice [ 0.507574] rtc_cmos 00:02: RTC can wake from S4 [ 0.507646] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.507679] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.507903] device-mapper: uevent: version 1.0.3 [ 0.511386] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 0.512235] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.520150] device-mapper: multipath: version 1.1.1 loaded [ 0.520158] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.528333] EISA: Probing bus 0 at eisa.0 [ 0.528347] Cannot allocate resource for EISA slot 1 [ 0.528351] Cannot allocate resource for EISA slot 2 [ 0.528359] Cannot allocate resource for EISA slot 4 [ 0.528380] EISA: Detected 0 cards. [ 0.536157] cpuidle: using governor ladder [ 0.536222] cpuidle: using governor menu [ 0.536779] TCP cubic registered [ 0.537049] NET: Registered protocol family 10 [ 0.537649] lo: Disabled Privacy Extensions [ 0.538001] NET: Registered protocol family 17 [ 0.547595] ACPI Warning for \_PR_.CPU0._PSS: Return type mismatch - found Integer, expected Package (20100428/nspredef-1053) [ 0.547609] ACPI: Invalid _PSS data [ 0.547632] Using IPI No-Shortcut mode [ 0.547877] PM: Resume from disk failed. [ 0.547898] registered taskstats version 1 [ 0.548258] Magic number: 11:80:485 [ 0.548464] rtc_cmos 00:02: setting system clock to 2011-05-09 14:28:57 UTC (1304951337) [ 0.548470] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.548472] EDD information not available. [ 0.548722] ACPI: Battery Slot [BAT0] (battery present) [ 0.880107] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 1.140231] isapnp: No Plug & Play device found [ 1.223614] Freeing initrd memory: 10512k freed [ 1.239864] Freeing unused kernel memory: 688k freed [ 1.241056] Write protecting the kernel text: 4932k [ 1.241116] Write protecting the kernel read-only data: 1980k [ 1.271734] udev[65]: starting version 163 [ 1.617724] pata_via 0000:00:11.1: version 0.3.4 [ 1.617848] pata_via 0000:00:11.1: power state changed by ACPI to D0 [ 1.617894] pata_via 0000:00:11.1: power state changed by ACPI to D0 [ 1.617910] pata_via 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 7 (level, low) -> IRQ 7 [ 1.652139] scsi0 : pata_via [ 1.673395] scsi1 : pata_via [ 1.674805] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1000 irq 14 [ 1.674810] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1008 irq 15 [ 1.676430] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 1.676505] via-rhine 0000:00:12.0: PCI INT A -> Link[LNKA] -> GSI 7 (level, low) -> IRQ 7 [ 1.697937] eth0: VIA Rhine II at 0xd0000400, 00:40:ca:d2:f4:a6, IRQ 7. [ 1.698653] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1. [ 1.699383] Initializing USB Mass Storage driver... [ 1.699571] scsi2 : usb-storage 1-3:1.0 [ 1.699818] usbcore: registered new interface driver usb-storage [ 1.699821] USB Mass Storage support registered. [ 1.836584] ata1.00: ATA-5: TOSHIBA MK3021GAS, GA124A, max UDMA/100 [ 1.836590] ata1.00: 58605120 sectors, multi 16: LBA [ 1.836627] ata1.00: limited to UDMA/33 due to 40-wire cable [ 1.844434] ata1.00: configured for UDMA/33 [ 1.844667] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3021GA GA12 PQ: 0 ANSI: 5 [ 1.844959] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.845529] sd 0:0:0:0: [sda] 58605120 512-byte logical blocks: (30.0 GB/27.9 GiB) [ 1.845608] sd 0:0:0:0: [sda] Write Protect is off [ 1.845612] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.845646] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.845905] sda: [ 2.000635] ata2.00: ATAPI: QSI CD-RW/DVD-ROM SBW242C, UQ81, max UDMA/33 [ 2.016319] ata2.00: configured for UDMA/33 [ 2.017187] scsi 1:0:0:0: CD-ROM QSI CDRW/DVD SBW242C UQ81 PQ: 0 ANSI: 5 [ 2.020635] sr0: scsi3-mmc drive: 1x/24x writer cd/rw xa/form2 cdda tray [ 2.020643] Uniform CD-ROM driver Revision: 3.20 [ 2.021344] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.021594] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.253535] sda1 sda2 < sda5 > [ 2.283481] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.593662] scsi 2:0:0:0: Direct-Access Generic Compact Flash 0.00 PQ: 0 ANSI: 2 [ 4.594243] scsi 2:0:0:1: Direct-Access Generic SD/MMC 0.00 PQ: 0 ANSI: 2 [ 4.594743] scsi 2:0:0:2: Direct-Access Generic MS/MS-PRO 0.00 PQ: 0 ANSI: 2 [ 4.595241] scsi 2:0:0:3: Direct-Access Generic SM/xD-Picture 0.00 PQ: 0 ANSI: 2 [ 4.597096] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 4.598161] sd 2:0:0:1: Attached scsi generic sg3 type 0 [ 4.599244] sd 2:0:0:2: Attached scsi generic sg4 type 0 [ 4.600396] sd 2:0:0:3: Attached scsi generic sg5 type 0 [ 4.613731] sd 2:0:0:0: [sdb] 15662304 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 4.618215] sd 2:0:0:0: [sdb] Write Protect is off [ 4.618224] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 4.618229] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 4.623880] sd 2:0:0:1: [sdc] Attached SCSI removable disk [ 4.627093] sd 2:0:0:2: [sdd] Attached SCSI removable disk [ 4.627734] sd 2:0:0:3: [sde] Attached SCSI removable disk [ 4.629352] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 4.629368] sdb: sdb1 sdb2 < sdb5 > [ 4.633849] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 4.633860] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 4.745946] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 8.850278] Adding 385020k swap on /dev/sdb5. Priority:-1 extents:1 across:385020k [ 8.989568] udev[329]: starting version 163 [ 9.135489] lp: driver loaded but no devices found [ 9.450474] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 9.538155] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.569455] udev[351]: renamed network interface eth0 to eth1 [ 9.760237] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:11/LNXVIDEO:00/input/input4 [ 9.760361] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 9.795410] Linux agpgart interface v0.103 [ 9.863178] yenta_cardbus 0000:00:0c.0: CardBus bridge found [1734:1078] [ 9.863205] yenta_cardbus 0000:00:0c.0: Using CSCINT to route CSC interrupts to PCI [ 9.863209] yenta_cardbus 0000:00:0c.0: Routing CardBus interrupts to PCI [ 9.863217] yenta_cardbus 0000:00:0c.0: TI: mfunc 0x01021002, devctl 0x44 [ 10.136596] yenta_cardbus 0000:00:0c.0: ISA IRQ mask 0x0078, PCI irq 10 [ 10.136601] yenta_cardbus 0000:00:0c.0: Socket status: 30000006 [ 10.151709] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input5 [ 10.167623] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input6 [ 10.243259] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset [ 10.316829] type=1400 audit(1304951347.266:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=584 comm="apparmor_parser" [ 10.317719] type=1400 audit(1304951347.266:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=584 comm="apparmor_parser" [ 10.318227] type=1400 audit(1304951347.266:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=584 comm="apparmor_parser" [ 10.349247] irda_init() [ 10.349284] NET: Registered protocol family 23 [ 10.421544] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd8000000 [ 10.458751] cfg80211: Calling CRDA to update world regulatory domain [ 10.583822] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377 [ 10.586088] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7 [ 10.587010] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 10.587779] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: [ 10.602343] cfg80211: World regulatory domain updated: [ 10.602351] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.602356] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.602361] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.602365] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.602369] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.602373] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.638226] clean. [ 10.638439] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd7fff 0xe0000-0xfffff [ 10.638518] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 10.638592] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean. [ 10.638670] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 11.097446] rt2500pci 0000:00:06.0: enabling device (0010 -> 0012) [ 11.097852] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 11.097860] rt2500pci 0000:00:06.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 11.267209] type=1400 audit(1304951348.214:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=797 comm="apparmor_parser" [ 11.304616] type=1400 audit(1304951348.254:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=800 comm="apparmor_parser" [ 11.305529] type=1400 audit(1304951348.254:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=800 comm="apparmor_parser" [ 11.306041] type=1400 audit(1304951348.254:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=800 comm="apparmor_parser" [ 11.363368] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 11.425247] type=1400 audit(1304951348.374:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=804 comm="apparmor_parser" [ 11.468318] phy0: Selected rate control algorithm 'minstrel' [ 11.469982] Registered led device: rt2500pci-phy0::radio [ 11.470145] Registered led device: rt2500pci-phy0::quality [ 11.470382] VIA 82xx Modem 0000:00:11.6: power state changed by ACPI to D0 [ 11.470451] VIA 82xx Modem 0000:00:11.6: power state changed by ACPI to D0 [ 11.470459] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001) [ 11.470473] VIA 82xx Modem 0000:00:11.6: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 11.470482] VIA 82xx Modem 0000:00:11.6: VIA VLink IRQ fixup, from 255 to 11 [ 11.478500] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64 [ 11.504391] type=1400 audit(1304951348.454:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=804 comm="apparmor_parser" [ 11.559347] type=1400 audit(1304951348.506:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=804 comm="apparmor_parser" [ 11.985989] VIA 82xx Audio 0000:00:11.5: power state changed by ACPI to D0 [ 11.986061] VIA 82xx Audio 0000:00:11.5: power state changed by ACPI to D0 [ 11.986078] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 11.986087] VIA 82xx Audio 0000:00:11.5: VIA VLink IRQ fixup, from 255 to 11 [ 11.986262] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 12.864879] ppdev: user-space parallel port driver [ 12.898921] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 18.707395] [drm] Initialized drm 1.1.0 20060810 [ 19.130237] pci 0000:01:00.0: power state changed by ACPI to D0 [ 19.130857] pci 0000:01:00.0: power state changed by ACPI to D0 [ 19.130875] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 7 (level, low) -> IRQ 7 [ 19.132938] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0 [ 20.697170] agpgart-via 0000:00:00.0: AGP 3.5 bridge [ 20.697206] agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x [ 20.697215] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode [ 20.697311] pci 0000:01:00.0: putting AGP V2 device into 4x mode [ 22.296048] eth1: no IPv6 routers present [ 23.305210] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0 [ 30.738179] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0 [ 85.404053] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 86.364376] scsi3 : usb-storage 1-4:1.0 [ 87.369674] scsi 3:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 0 CCS [ 87.373902] sd 3:0:0:0: Attached scsi generic sg6 type 0 [ 87.383284] sd 3:0:0:0: [sdf] 7864320 512-byte logical blocks: (4.02 GB/3.75 GiB) [ 87.384421] sd 3:0:0:0: [sdf] Write Protect is off [ 87.384430] sd 3:0:0:0: [sdf] Mode Sense: 43 00 00 00 [ 87.384434] sd 3:0:0:0: [sdf] Assuming drive cache: write through [ 87.388237] sd 3:0:0:0: [sdf] Assuming drive cache: write through [ 87.388258] sdf: sdf1 [ 87.394423] sd 3:0:0:0: [sdf] Assuming drive cache: write through [ 87.394436] sd 3:0:0:0: [sdf] Attached SCSI removable disk