X.Org X Server 1.10.1 Release Date: 2011-04-15 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux ibbo-tablet 2.6.38-9-generic #43-Ubuntu SMP Thu Apr 28 15:25:15 UTC 2011 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-9-generic root=UUID=55990f72-8858-4bd5-810a-4edb0e2c9054 ro quiet splash vt.handoff=7 Build Date: 21 May 2011 11:38:35AM xorg-server 2:1.10.1-1ubuntu1.1 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.20.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 5 20:21:20 2011 (==) Using system config directory "/usr/share/X11/xorg.conf.d" (==) No Layout section. Using the first Screen section. (==) No screen section available. Using defaults. (**) |-->Screen "Default Screen Section" (0) (**) | |-->Monitor "" (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (--) PCI:*(0:0:2:0) 8086:27a2:1179:0021 rev 3, Mem @ 0xffd80000/524288, 0xe0000000/268435456, 0xffd40000/262144, I/O @ 0x0000cff8/8 (--) PCI: (0:0:2:1) 8086:27a6:1179:0021 rev 3, Mem @ 0x8a000000/524288 (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.0.0 (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.0.0 (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.0.0 (==) AIGLX enabled (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.13.0 (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.0.0 (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.2.0 (==) Matched intel as autoconfigured driver 0 (==) Matched vesa as autoconfigured driver 1 (==) Matched fbdev as autoconfigured driver 2 (==) Assigned the driver to the xf86ConfigLayout (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.10.1, module version = 2.14.0 (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.10.0, module version = 2.3.0 (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so (II) Module fbdev: vendor="X.Org Foundation" compiled for 1.10.0, module version = 0.4.2 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge (II) VESA: driver for VESA chipsets: vesa (II) FBDEV: driver for framebuffer: fbdev (++) using VT number 7 (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so (WW) Falling back to old probe method for vesa (WW) Falling back to old probe method for fbdev (II) Loading /usr/lib/xorg/modules/libfbdevhw.so (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 1.10.1, module version = 0.0.2 (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM (--) intel(0): Chipset: "945GM" (**) intel(0): Relaxed fencing disabled (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (==) intel(0): video overlay key set to 0x101fe (II) intel(0): Output LVDS1 has no monitor section (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 (II) intel(0): Output VGA1 has no monitor section (II) intel(0): Output DVI1 has no monitor section (II) intel(0): EDID for output LVDS1 (II) intel(0): Manufacturer: LCD Model: 831 Serial#: 16843009 (II) intel(0): Year: 2007 Week: 18 (II) intel(0): EDID Version: 1.2 (II) intel(0): Digital Display Input (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 16 (II) intel(0): Gamma: 2.20 (II) intel(0): No DPMS capabilities specified (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) intel(0): First detailed timing is preferred mode (II) intel(0): redX: 0.602 redY: 0.336 greenX: 0.296 greenY: 0.546 (II) intel(0): blueX: 0.148 blueY: 0.126 whiteX: 0.313 whiteY: 0.329 (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported standard timings: (II) intel(0): #0: hsize: 1280 vsize 1280 refresh: 60 vid: 129 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 68.9 MHz Image Size: 261 x 163 mm (II) intel(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0 (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0 (II) intel(0): Ranges: V min: 59 V max: 61 Hz, H min: 47 H max: 51 kHz, PixClock max 85 MHz (II) intel(0): Monitor name: LTD121KX3K (II) intel(0): Serial No: QOR7E100311 (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff003064310801010101 (II) intel(0): 12110102801a10780a0f159a564b8b26 (II) intel(0): 20505400000081000101010101010101 (II) intel(0): 010101010101ee1a0080502010301030 (II) intel(0): 130005a310000018000000fd003b3d2f (II) intel(0): 3308000a202020202020000000fc004c (II) intel(0): 54443132314b58334b0a2020000000ff (II) intel(0): 00514f5237453130303331310a2000e0 (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Printing probed modes for output LVDS1 (II) intel(0): Modeline "1280x800"x60.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID for output VGA1 (II) intel(0): EDID for output DVI1 (II) intel(0): Output LVDS1 connected (II) intel(0): Output VGA1 disconnected (II) intel(0): Output DVI1 disconnected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS1 using initial mode 1280x800 (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. (II) intel(0): Kernel page flipping support detected, enabling (**) intel(0): Display dimensions: (260, 160) mm (**) intel(0): DPI set to (125, 126) (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.0.0 (II) Unloading vesa (II) Unloading fbdev (II) Unloading fbdevhw (==) Depth 24 pixmap format is 32 bpp (==) intel(0): VideoRam: 262144 KB (II) intel(0): [DRI2] Setup complete (II) intel(0): [DRI2] DRI driver: i915 (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (II) put_image (II) get_image (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (==) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: DRI2 Enabled (==) intel(0): hotplug detection: "enabled" (--) RandR disabled (II) AIGLX: Trying DRI driver /usr/lib/dri/i915_dri.so (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_INTEL_swap_event (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects (II) AIGLX: Loaded and initialized i915 (II) GLX: Initialized DRI2 GL provider for screen 0 (II) intel(0): Setting screen physical size to 338 x 211 (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm (II) config/udev: Adding input device Power Button (/dev/input/event2) (**) Power Button: Applying InputClass "evdev keyboard catchall" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.10.0.902, module version = 2.6.0 (II) Using input driver 'evdev' for 'Power Button' (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event2" (--) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (II) XKB: reuse xkmfile /var/lib/xkb/server-2B4266AA55228AE7D9557A18F1965DBA19850816.xkm (II) config/udev: Adding input device Video Bus (/dev/input/event4) (**) Video Bus: Applying InputClass "evdev keyboard catchall" (II) Using input driver 'evdev' for 'Video Bus' (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event4" (--) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (II) config/udev: Adding input device Power Button (/dev/input/event1) (**) Power Button: Applying InputClass "evdev keyboard catchall" (II) Using input driver 'evdev' for 'Power Button' (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event1" (--) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (II) config/udev: Adding input device Lid Switch (/dev/input/event0) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event8) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3" (--) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event6) (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall" (II) Using input driver 'evdev' for 'PS/2 Mouse' (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (**) PS/2 Mouse: always reports core events (**) PS/2 Mouse: Device: "/dev/input/event6" (--) PS/2 Mouse: Found 3 mouse buttons (--) PS/2 Mouse: Found relative axes (--) PS/2 Mouse: Found x and y relative axes (II) PS/2 Mouse: Configuring as mouse (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5 (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE) (II) PS/2 Mouse: initialized for relative axes. (**) PS/2 Mouse: (accel) keeping acceleration scheme 1 (**) PS/2 Mouse: (accel) acceleration profile 0 (**) PS/2 Mouse: (accel) acceleration factor: 2.000 (**) PS/2 Mouse: (accel) acceleration threshold: 4 (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event7) (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall" (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall" (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.10.0.902, module version = 1.3.99 (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint' (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so (**) AlpsPS/2 ALPS GlidePoint: always reports core events (--) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (--) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (--) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127 (--) AlpsPS/2 ALPS GlidePoint: buttons: left right middle (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 16 (--) AlpsPS/2 ALPS GlidePoint: touchpad found (**) AlpsPS/2 ALPS GlidePoint: always reports core events (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD) (**) AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5 (**) AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75 (**) AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156 (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1 (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1 (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000 (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4 (II) AlpsPS/2 ALPS GlidePoint: failed to open grail, no gesture support (--) AlpsPS/2 ALPS GlidePoint: touchpad found (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Serial Wacom Tablet (/dev/ttyS4) (**) Serial Wacom Tablet: Applying InputClass "Wacom serial class" (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so (II) Module wacom: vendor="X.Org Foundation" compiled for 1.10.0, module version = 0.10.11 (II) Using input driver 'wacom' for 'Serial Wacom Tablet' (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so (**) Serial Wacom Tablet: always reports core events (II) Serial Wacom Tablet: type not specified, assuming 'stylus'. (II) Serial Wacom Tablet: other types will be automatically added. (II) Serial Wacom Tablet stylus: serial tablet id 0x90. (--) Serial Wacom Tablet stylus: using pressure threshold of 27 for button 1 (--) Serial Wacom Tablet stylus: Wacom General ISDV4 tablet maxX=26112 maxY=16320 maxZ=127 resX=100000 resY=100000 tilt=disabled (II) Serial Wacom Tablet stylus: hotplugging dependent devices. (**) Serial Wacom Tablet eraser: Applying InputClass "Wacom serial class" (II) Using input driver 'wacom' for 'Serial Wacom Tablet eraser' (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so (**) Serial Wacom Tablet eraser: always reports core events (--) Serial Wacom Tablet eraser: Wacom General ISDV4 tablet maxX=26112 maxY=16320 maxZ=127 resX=100000 resY=100000 tilt=disabled (II) XINPUT: Adding extended input device "Serial Wacom Tablet eraser" (type: ERASER) (--) Serial Wacom Tablet eraser: top X=0 top Y=0 bottom X=26112 bottom Y=16320 resol X=100000 resol Y=100000 (**) Serial Wacom Tablet eraser: (accel) keeping acceleration scheme 1 (**) Serial Wacom Tablet eraser: (accel) acceleration profile 0 (**) Serial Wacom Tablet eraser: (accel) acceleration factor: 2.000 (**) Serial Wacom Tablet eraser: (accel) acceleration threshold: 4 (II) Serial Wacom Tablet stylus: hotplugging completed. (II) XINPUT: Adding extended input device "Serial Wacom Tablet stylus" (type: STYLUS) (--) Serial Wacom Tablet stylus: top X=0 top Y=0 bottom X=26112 bottom Y=16320 resol X=100000 resol Y=100000 (**) Serial Wacom Tablet stylus: (accel) keeping acceleration scheme 1 (**) Serial Wacom Tablet stylus: (accel) acceleration profile 0 (**) Serial Wacom Tablet stylus: (accel) acceleration factor: 2.000 (**) Serial Wacom Tablet stylus: (accel) acceleration threshold: 4 (II) config/udev: Adding input device Toshiba input device (/dev/input/event5) (**) Toshiba input device: Applying InputClass "evdev keyboard catchall" (II) Using input driver 'evdev' for 'Toshiba input device' (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (**) Toshiba input device: always reports core events (**) Toshiba input device: Device: "/dev/input/event5" (--) Toshiba input device: Found keys (II) Toshiba input device: Configuring as keyboard (II) XINPUT: Adding extended input device "Toshiba input device" (type: KEYBOARD) (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) XKB: reuse xkmfile /var/lib/xkb/server-81EC4871279DB1D73113D19E789F270C19322F52.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-81EC4871279DB1D73113D19E789F270C19322F52.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) intel(0): Allocated new frame buffer 832x1280 stride 4096, tiled (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) intel(0): Allocated new frame buffer 832x1280 stride 4096, tiled (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) intel(0): Allocated new frame buffer 832x1280 stride 4096, tiled (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-81EC4871279DB1D73113D19E789F270C19322F52.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-81EC4871279DB1D73113D19E789F270C19322F52.xkm (II) AIGLX: Suspending AIGLX clients for VT switch (II) AIGLX: Resuming AIGLX clients after VT switch (EE) intel(0): Couldn't create pixmap for fbcon (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) AlpsPS/2 ALPS GlidePoint: failed to open grail, no gesture support (--) AlpsPS/2 ALPS GlidePoint: touchpad found (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) intel(0): Allocated new frame buffer 832x1280 stride 4096, tiled (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) XKB: reuse xkmfile /var/lib/xkb/server-78E5AB1A377F58EA3CA6A9B52BDB51A569C782D6.xkm (II) intel(0): EDID vendor "LCD", prod id 2097 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1280x1280"x60.0 137.38 1280 1368 1504 1728 1280 1281 1284 1325 -hsync +vsync (79.5 kHz)