[ 18.895] X.Org X Server 1.10.0.902 (1.10.1 RC 2) Release Date: 2011-04-08 [ 18.895] X Protocol Version 11, Revision 0 [ 18.895] Build Operating System: Linux 2.6.24-27-server i686 Ubuntu [ 18.895] Current Operating System: Linux miked-Satellite-M45 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686 [ 18.895] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=775dfa52-f4cf-48c0-b5f3-ebe6f6636ef7 ro quiet splash vt.handoff=7 [ 18.895] Build Date: 11 April 2011 07:04:59AM [ 18.895] xorg-server 2:1.10.0.902-1ubuntu1 (For technical support please see http://www.ubuntu.com/support) [ 18.895] Current version of pixman: 0.20.2 [ 18.895] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 18.895] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 18.895] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 19 17:57:07 2011 [ 18.941] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 19.033] (==) No Layout section. Using the first Screen section. [ 19.033] (==) No screen section available. Using defaults. [ 19.033] (**) |-->Screen "Default Screen Section" (0) [ 19.033] (**) | |-->Monitor "" [ 19.043] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 19.043] (==) Automatically adding devices [ 19.043] (==) Automatically enabling devices [ 19.055] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 19.055] Entry deleted from font path. [ 19.055] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 19.055] Entry deleted from font path. [ 19.055] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 19.055] Entry deleted from font path. [ 19.064] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 19.064] Entry deleted from font path. [ 19.064] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 19.064] Entry deleted from font path. [ 19.081] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins [ 19.081] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 19.081] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 19.081] (II) Loader magic: 0x81ffde0 [ 19.081] (II) Module ABI versions: [ 19.081] X.Org ANSI C Emulation: 0.4 [ 19.081] X.Org Video Driver: 10.0 [ 19.081] X.Org XInput driver : 12.3 [ 19.081] X.Org Server Extension : 5.0 [ 19.082] (--) PCI:*(0:0:2:0) 8086:2592:1179:ff10 rev 3, Mem @ 0xd0000000/524288, 0xa0000000/268435456, 0xd0080000/262144, I/O @ 0x0000e000/8 [ 19.082] (--) PCI: (0:0:2:1) 8086:2792:1179:ff10 rev 3, Mem @ 0xd0100000/524288 [ 19.082] (II) Open ACPI successful (/var/run/acpid.socket) [ 19.082] (II) LoadModule: "extmod" [ 19.105] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 19.118] (II) Module extmod: vendor="X.Org Foundation" [ 19.118] compiled for 1.10.0.902, module version = 1.0.0 [ 19.118] Module class: X.Org Server Extension [ 19.118] ABI class: X.Org Server Extension, version 5.0 [ 19.118] (II) Loading extension MIT-SCREEN-SAVER [ 19.118] (II) Loading extension XFree86-VidModeExtension [ 19.118] (II) Loading extension XFree86-DGA [ 19.118] (II) Loading extension DPMS [ 19.118] (II) Loading extension XVideo [ 19.118] (II) Loading extension XVideo-MotionCompensation [ 19.118] (II) Loading extension X-Resource [ 19.118] (II) LoadModule: "dbe" [ 19.118] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 19.127] (II) Module dbe: vendor="X.Org Foundation" [ 19.127] compiled for 1.10.0.902, module version = 1.0.0 [ 19.127] Module class: X.Org Server Extension [ 19.127] ABI class: X.Org Server Extension, version 5.0 [ 19.127] (II) Loading extension DOUBLE-BUFFER [ 19.127] (II) LoadModule: "glx" [ 19.128] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 19.155] (II) Module glx: vendor="X.Org Foundation" [ 19.155] compiled for 1.10.0.902, module version = 1.0.0 [ 19.155] ABI class: X.Org Server Extension, version 5.0 [ 19.158] (==) AIGLX enabled [ 19.158] (II) Loading extension GLX [ 19.158] (II) LoadModule: "record" [ 19.159] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 19.159] (II) Module record: vendor="X.Org Foundation" [ 19.159] compiled for 1.10.0.902, module version = 1.13.0 [ 19.159] Module class: X.Org Server Extension [ 19.159] ABI class: X.Org Server Extension, version 5.0 [ 19.159] (II) Loading extension RECORD [ 19.159] (II) LoadModule: "dri" [ 19.160] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 19.161] (II) Module dri: vendor="X.Org Foundation" [ 19.161] compiled for 1.10.0.902, module version = 1.0.0 [ 19.161] ABI class: X.Org Server Extension, version 5.0 [ 19.161] (II) Loading extension XFree86-DRI [ 19.161] (II) LoadModule: "dri2" [ 19.161] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 19.161] (II) Module dri2: vendor="X.Org Foundation" [ 19.161] compiled for 1.10.0.902, module version = 1.2.0 [ 19.161] ABI class: X.Org Server Extension, version 5.0 [ 19.162] (II) Loading extension DRI2 [ 19.162] (==) Matched intel as autoconfigured driver 0 [ 19.162] (==) Matched vesa as autoconfigured driver 1 [ 19.162] (==) Matched fbdev as autoconfigured driver 2 [ 19.162] (==) Assigned the driver to the xf86ConfigLayout [ 19.162] (II) LoadModule: "intel" [ 19.162] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 19.181] (II) Module intel: vendor="X.Org Foundation" [ 19.181] compiled for 1.10.0.902, module version = 2.14.0 [ 19.181] Module class: X.Org Video Driver [ 19.181] ABI class: X.Org Video Driver, version 10.0 [ 19.181] (II) LoadModule: "vesa" [ 19.181] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 19.185] (II) Module vesa: vendor="X.Org Foundation" [ 19.185] compiled for 1.10.0, module version = 2.3.0 [ 19.185] Module class: X.Org Video Driver [ 19.185] ABI class: X.Org Video Driver, version 10.0 [ 19.185] (II) LoadModule: "fbdev" [ 19.186] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 19.194] (II) Module fbdev: vendor="X.Org Foundation" [ 19.194] compiled for 1.10.0, module version = 0.4.2 [ 19.194] ABI class: X.Org Video Driver, version 10.0 [ 19.194] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge [ 19.195] (II) VESA: driver for VESA chipsets: vesa [ 19.195] (II) FBDEV: driver for framebuffer: fbdev [ 19.195] (++) using VT number 7 [ 19.197] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 19.197] (WW) Falling back to old probe method for vesa [ 19.197] (WW) Falling back to old probe method for fbdev [ 19.197] (II) Loading sub module "fbdevhw" [ 19.197] (II) LoadModule: "fbdevhw" [ 19.197] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 19.221] (II) Module fbdevhw: vendor="X.Org Foundation" [ 19.221] compiled for 1.10.0.902, module version = 0.0.2 [ 19.221] ABI class: X.Org Video Driver, version 10.0 [ 19.221] drmOpenDevice: node name is /dev/dri/card0 [ 19.221] drmOpenDevice: open result is 9, (OK) [ 19.221] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 19.221] drmOpenDevice: node name is /dev/dri/card0 [ 19.221] drmOpenDevice: open result is 9, (OK) [ 19.221] drmOpenByBusid: drmOpenMinor returns 9 [ 19.221] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 19.221] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 19.221] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 19.222] (==) intel(0): RGB weight 888 [ 19.222] (==) intel(0): Default visual is TrueColor [ 19.222] (II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM [ 19.222] (--) intel(0): Chipset: "915GM" [ 19.222] (**) intel(0): Tiling enabled [ 19.222] (**) intel(0): SwapBuffers wait enabled [ 19.222] (==) intel(0): video overlay key set to 0x101fe [ 19.222] (II) intel(0): Output LVDS1 has no monitor section [ 19.324] (II) intel(0): Output VGA1 has no monitor section [ 19.568] (II) intel(0): Output TV1 has no monitor section [ 19.568] (II) intel(0): EDID for output LVDS1 [ 19.568] (II) intel(0): Manufacturer: SEC Model: 3245 Serial#: 0 [ 19.568] (II) intel(0): Year: 2005 Week: 0 [ 19.568] (II) intel(0): EDID Version: 1.3 [ 19.568] (II) intel(0): Digital Display Input [ 19.568] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21 [ 19.568] (II) intel(0): Gamma: 2.20 [ 19.568] (II) intel(0): No DPMS capabilities specified [ 19.568] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 19.568] (II) intel(0): First detailed timing is preferred mode [ 19.568] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550 [ 19.568] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329 [ 19.568] (II) intel(0): Manufacturer's mask: 0 [ 19.568] (II) intel(0): Supported detailed timing: [ 19.568] (II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm [ 19.568] (II) intel(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0 [ 19.568] (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0 [ 19.568] (II) intel(0): Unknown vendor-specific block f [ 19.568] (II) intel(0): SAMSUNG [ 19.568] (II) intel(0): LTN154X3-L07 [ 19.568] (II) intel(0): EDID (in hex): [ 19.568] (II) intel(0): 00ffffffffffff004ca3453200000000 [ 19.568] (II) intel(0): 000f0103802115780a87f594574f8c27 [ 19.568] (II) intel(0): 27505400000001010101010101010101 [ 19.568] (II) intel(0): 010101010101ee1a0080502010301030 [ 19.568] (II) intel(0): 13004bcf100000190000000f00000000 [ 19.568] (II) intel(0): 00000000002387026402000000fe0053 [ 19.568] (II) intel(0): 414d53554e470a2020202020000000fe [ 19.568] (II) intel(0): 004c544e31353458332d4c30370a0061 [ 19.568] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 19.568] (II) intel(0): Printing DDC gathered Modelines: [ 19.568] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 19.568] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 19.568] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 19.568] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 19.568] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 19.568] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 19.569] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 19.569] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 19.569] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 19.569] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 19.569] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 19.569] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 19.569] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 19.569] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 19.569] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 19.569] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) [ 19.569] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) [ 19.569] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 19.569] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 19.569] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 19.569] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 19.569] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 19.569] (II) intel(0): Printing probed modes for output LVDS1 [ 19.569] (II) intel(0): Modeline "1280x800"x60.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 19.569] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 19.569] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 19.569] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 19.569] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 19.672] (II) intel(0): EDID for output VGA1 [ 19.916] (II) intel(0): EDID for output TV1 [ 19.916] (II) intel(0): Output LVDS1 connected [ 19.916] (II) intel(0): Output VGA1 disconnected [ 19.916] (II) intel(0): Output TV1 disconnected [ 19.916] (II) intel(0): Using exact sizes for initial modes [ 19.916] (II) intel(0): Output LVDS1 using initial mode 1280x800 [ 19.916] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 19.916] (II) intel(0): Kernel page flipping support detected, enabling [ 19.916] (**) intel(0): Display dimensions: (330, 210) mm [ 19.916] (**) intel(0): DPI set to (98, 96) [ 19.916] (II) Loading sub module "fb" [ 19.916] (II) LoadModule: "fb" [ 19.916] (II) Loading /usr/lib/xorg/modules/libfb.so [ 20.006] (II) Module fb: vendor="X.Org Foundation" [ 20.006] compiled for 1.10.0.902, module version = 1.0.0 [ 20.006] ABI class: X.Org ANSI C Emulation, version 0.4 [ 20.006] (II) UnloadModule: "vesa" [ 20.006] (II) Unloading vesa [ 20.006] (II) UnloadModule: "fbdev" [ 20.006] (II) Unloading fbdev [ 20.006] (II) UnloadModule: "fbdevhw" [ 20.006] (II) Unloading fbdevhw [ 20.006] (==) Depth 24 pixmap format is 32 bpp [ 20.006] (==) intel(0): VideoRam: 262144 KB [ 20.006] (II) intel(0): [DRI2] Setup complete [ 20.006] (II) intel(0): [DRI2] DRI driver: i915 [ 20.006] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled [ 20.040] (II) UXA(0): Driver registered support for the following operations: [ 20.040] (II) solid [ 20.040] (II) copy [ 20.040] (II) composite (RENDER acceleration) [ 20.040] (II) put_image [ 20.041] (II) get_image [ 20.041] (==) intel(0): Backing store disabled [ 20.041] (==) intel(0): Silken mouse enabled [ 20.042] (II) intel(0): Initializing HW Cursor [ 20.068] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 20.068] (==) intel(0): DPMS enabled [ 20.068] (==) intel(0): Intel XvMC decoder disabled [ 20.068] (II) intel(0): Set up textured video [ 20.068] (II) intel(0): Set up overlay video [ 20.068] (II) intel(0): direct rendering: DRI2 Enabled [ 20.068] (==) intel(0): hotplug detection: "enabled" [ 20.068] (--) RandR disabled [ 20.068] (II) Initializing built-in extension Generic Event Extension [ 20.068] (II) Initializing built-in extension SHAPE [ 20.068] (II) Initializing built-in extension MIT-SHM [ 20.068] (II) Initializing built-in extension XInputExtension [ 20.068] (II) Initializing built-in extension XTEST [ 20.068] (II) Initializing built-in extension BIG-REQUESTS [ 20.068] (II) Initializing built-in extension SYNC [ 20.068] (II) Initializing built-in extension XKEYBOARD [ 20.068] (II) Initializing built-in extension XC-MISC [ 20.068] (II) Initializing built-in extension SECURITY [ 20.068] (II) Initializing built-in extension XINERAMA [ 20.068] (II) Initializing built-in extension XFIXES [ 20.068] (II) Initializing built-in extension RENDER [ 20.068] (II) Initializing built-in extension RANDR [ 20.068] (II) Initializing built-in extension COMPOSITE [ 20.068] (II) Initializing built-in extension DAMAGE [ 20.068] (II) Initializing built-in extension GESTURE [ 20.098] (II) AIGLX: Trying DRI driver /usr/lib/dri/i915_dri.so [ 20.315] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 20.315] (II) AIGLX: enabled GLX_INTEL_swap_event [ 20.315] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 20.315] (II) AIGLX: enabled GLX_SGI_make_current_read [ 20.315] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 20.315] (II) AIGLX: Loaded and initialized i915 [ 20.315] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 20.316] (II) intel(0): Setting screen physical size to 338 x 211 [ 20.490] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 20.514] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 20.514] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.514] (II) LoadModule: "evdev" [ 20.515] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 20.574] (II) Module evdev: vendor="X.Org Foundation" [ 20.574] compiled for 1.10.0.902, module version = 2.6.0 [ 20.574] Module class: X.Org XInput Driver [ 20.574] ABI class: X.Org XInput driver, version 12.3 [ 20.574] (II) Using input driver 'evdev' for 'Power Button' [ 20.574] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 20.575] (**) Power Button: always reports core events [ 20.575] (**) Power Button: Device: "/dev/input/event2" [ 20.575] (--) Power Button: Found keys [ 20.575] (II) Power Button: Configuring as keyboard [ 20.575] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 20.575] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 20.575] (**) Option "xkb_rules" "evdev" [ 20.575] (**) Option "xkb_model" "pc105" [ 20.575] (**) Option "xkb_layout" "us" [ 20.587] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 20.587] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 20.587] (II) Using input driver 'evdev' for 'Video Bus' [ 20.587] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 20.587] (**) Video Bus: always reports core events [ 20.587] (**) Video Bus: Device: "/dev/input/event4" [ 20.587] (--) Video Bus: Found keys [ 20.587] (II) Video Bus: Configuring as keyboard [ 20.587] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4" [ 20.587] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) [ 20.587] (**) Option "xkb_rules" "evdev" [ 20.587] (**) Option "xkb_model" "pc105" [ 20.587] (**) Option "xkb_layout" "us" [ 20.613] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 20.904] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.904] (II) Using input driver 'evdev' for 'Power Button' [ 20.904] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 20.904] (**) Power Button: always reports core events [ 20.904] (**) Power Button: Device: "/dev/input/event1" [ 20.904] (--) Power Button: Found keys [ 20.904] (II) Power Button: Configuring as keyboard [ 20.904] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1" [ 20.904] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 20.905] (**) Option "xkb_rules" "evdev" [ 20.905] (**) Option "xkb_model" "pc105" [ 20.905] (**) Option "xkb_layout" "us" [ 20.905] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 20.905] (II) No input driver/identifier specified (ignoring) [ 20.913] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 20.913] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 20.913] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 20.913] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 20.913] (**) AT Translated Set 2 keyboard: always reports core events [ 20.913] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3" [ 20.913] (--) AT Translated Set 2 keyboard: Found keys [ 20.913] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 20.913] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 20.913] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) [ 20.913] (**) Option "xkb_rules" "evdev" [ 20.913] (**) Option "xkb_model" "pc105" [ 20.913] (**) Option "xkb_layout" "us" [ 20.914] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5) [ 20.914] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 20.914] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 20.914] (II) LoadModule: "synaptics" [ 20.914] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 21.117] (II) Module synaptics: vendor="X.Org Foundation" [ 21.117] compiled for 1.10.0.902, module version = 1.3.99 [ 21.117] Module class: X.Org XInput Driver [ 21.117] ABI class: X.Org XInput driver, version 12.3 [ 21.117] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 21.117] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 21.117] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 21.117] (**) Option "Device" "/dev/input/event5" [ 21.117] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 [ 21.117] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 [ 21.117] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 21.117] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 21.117] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple [ 21.117] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 21.117] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 21.117] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5" [ 21.117] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD) [ 21.117] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 21.117] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75 [ 21.117] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040 [ 21.117] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 21.117] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 21.117] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 21.117] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 21.117] (II) SynPS/2 Synaptics TouchPad: failed to open grail, no gesture support [ 21.117] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 21.118] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 21.118] (II) No input driver/identifier specified (ignoring) [ 24.093] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 24.093] (II) intel(0): Printing DDC gathered Modelines: [ 24.093] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 24.429] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 24.429] (II) intel(0): Printing DDC gathered Modelines: [ 24.429] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 24.762] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 24.762] (II) intel(0): Printing DDC gathered Modelines: [ 24.762] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 25.093] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 25.093] (II) intel(0): Printing DDC gathered Modelines: [ 25.093] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 58.060] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 58.060] (II) intel(0): Printing DDC gathered Modelines: [ 58.060] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 58.546] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 58.546] (II) intel(0): Printing DDC gathered Modelines: [ 58.546] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 58.909] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 58.909] (II) intel(0): Printing DDC gathered Modelines: [ 58.909] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 59.357] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 59.357] (II) intel(0): Printing DDC gathered Modelines: [ 59.357] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 61.454] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 61.454] (II) intel(0): Printing DDC gathered Modelines: [ 61.454] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 68.955] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 68.955] (II) intel(0): Printing DDC gathered Modelines: [ 68.955] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 113.564] (WW) intel(0): I830DRI2FlipEventHandler: Pageflip completion has impossible msc 6139 < target_msc 6140 [ 113.667] (WW) intel(0): I830DRI2FlipEventHandler: Pageflip completion has impossible msc 6145 < target_msc 6146 [ 117.563] (WW) intel(0): I830DRI2FlipEventHandler: Pageflip completion has impossible msc 6379 < target_msc 6380 [ 120.617] (WW) intel(0): I830DRI2FlipEventHandler: Pageflip completion has impossible msc 6563 < target_msc 6564 [ 127.870] (WW) intel(0): I830DRI2FlipEventHandler: Pageflip completion has impossible msc 6928 < target_msc 6929 [ 8574.660] (II) XKB: generating xkmfile /var/lib/xkb/server-9A8405F3FE0A780485714A4B6DD41909C2CF9F83.xkm