[ 98.256] X.Org X Server 1.10.0 Release Date: 2011-2-25 [ 98.256] X Protocol Version 11, Revision 0 [ 98.256] Build Operating System: Linux 2.6.24-27-server i686 Ubuntu [ 98.256] Current Operating System: Linux miki 2.6.38-8-generic #41-Ubuntu SMP Tue Apr 5 19:29:52 UTC 2011 i686 [ 98.256] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=263aecd1-0156-49f9-8d5e-99e8079b240f ro gfxpayload=true quiet splash vt.handoff=7 [ 98.256] Build Date: 01 April 2011 07:09:45AM [ 98.256] xorg-server 2:1.10.0-0ubuntu3 (For technical support please see http://www.ubuntu.com/support) [ 98.256] Current version of pixman: 0.20.2 [ 98.256] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 98.256] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 98.256] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr 9 19:42:55 2011 [ 98.257] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 98.257] (==) No Layout section. Using the first Screen section. [ 98.257] (==) No screen section available. Using defaults. [ 98.257] (**) |-->Screen "Default Screen Section" (0) [ 98.257] (**) | |-->Monitor "" [ 98.257] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 98.257] (==) Automatically adding devices [ 98.257] (==) Automatically enabling devices [ 98.258] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 98.258] Entry deleted from font path. [ 98.258] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins [ 98.258] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 98.258] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 98.258] (II) Loader magic: 0x81ffde0 [ 98.258] (II) Module ABI versions: [ 98.258] X.Org ANSI C Emulation: 0.4 [ 98.258] X.Org Video Driver: 10.0 [ 98.258] X.Org XInput driver : 12.3 [ 98.258] X.Org Server Extension : 5.0 [ 98.259] (--) PCI:*(0:0:2:0) 8086:2592:1025:006a rev 3, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0000000/262144, I/O @ 0x00001800/8 [ 98.259] (--) PCI: (0:0:2:1) 8086:2792:1025:006a rev 3, Mem @ 0x54000000/524288 [ 98.259] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 98.259] (II) LoadModule: "extmod" [ 98.263] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 98.264] (II) Module extmod: vendor="X.Org Foundation" [ 98.264] compiled for 1.10.0, module version = 1.0.0 [ 98.264] Module class: X.Org Server Extension [ 98.264] ABI class: X.Org Server Extension, version 5.0 [ 98.264] (II) Loading extension MIT-SCREEN-SAVER [ 98.264] (II) Loading extension XFree86-VidModeExtension [ 98.264] (II) Loading extension XFree86-DGA [ 98.264] (II) Loading extension DPMS [ 98.264] (II) Loading extension XVideo [ 98.264] (II) Loading extension XVideo-MotionCompensation [ 98.264] (II) Loading extension X-Resource [ 98.264] (II) LoadModule: "dbe" [ 98.264] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 98.264] (II) Module dbe: vendor="X.Org Foundation" [ 98.264] compiled for 1.10.0, module version = 1.0.0 [ 98.264] Module class: X.Org Server Extension [ 98.264] ABI class: X.Org Server Extension, version 5.0 [ 98.264] (II) Loading extension DOUBLE-BUFFER [ 98.264] (II) LoadModule: "glx" [ 98.265] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 98.265] (II) Module glx: vendor="X.Org Foundation" [ 98.265] compiled for 1.10.0, module version = 1.0.0 [ 98.265] ABI class: X.Org Server Extension, version 5.0 [ 98.265] (==) AIGLX enabled [ 98.265] (II) Loading extension GLX [ 98.265] (II) LoadModule: "record" [ 98.266] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 98.266] (II) Module record: vendor="X.Org Foundation" [ 98.266] compiled for 1.10.0, module version = 1.13.0 [ 98.266] Module class: X.Org Server Extension [ 98.266] ABI class: X.Org Server Extension, version 5.0 [ 98.266] (II) Loading extension RECORD [ 98.266] (II) LoadModule: "dri" [ 98.267] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 98.267] (II) Module dri: vendor="X.Org Foundation" [ 98.267] compiled for 1.10.0, module version = 1.0.0 [ 98.267] ABI class: X.Org Server Extension, version 5.0 [ 98.267] (II) Loading extension XFree86-DRI [ 98.267] (II) LoadModule: "dri2" [ 98.267] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 98.273] (II) Module dri2: vendor="X.Org Foundation" [ 98.273] compiled for 1.10.0, module version = 1.2.0 [ 98.274] ABI class: X.Org Server Extension, version 5.0 [ 98.274] (II) Loading extension DRI2 [ 98.274] (==) Matched intel as autoconfigured driver 0 [ 98.274] (==) Matched vesa as autoconfigured driver 1 [ 98.274] (==) Matched fbdev as autoconfigured driver 2 [ 98.274] (==) Assigned the driver to the xf86ConfigLayout [ 98.274] (II) LoadModule: "intel" [ 98.274] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 98.274] (II) Module intel: vendor="X.Org Foundation" [ 98.274] compiled for 1.10.0, module version = 2.14.0 [ 98.274] Module class: X.Org Video Driver [ 98.274] ABI class: X.Org Video Driver, version 10.0 [ 98.274] (II) LoadModule: "vesa" [ 98.275] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 98.275] (II) Module vesa: vendor="X.Org Foundation" [ 98.275] compiled for 1.10.0, module version = 2.3.0 [ 98.275] Module class: X.Org Video Driver [ 98.275] ABI class: X.Org Video Driver, version 10.0 [ 98.275] (II) LoadModule: "fbdev" [ 98.275] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 98.275] (II) Module fbdev: vendor="X.Org Foundation" [ 98.275] compiled for 1.10.0, module version = 0.4.2 [ 98.275] ABI class: X.Org Video Driver, version 10.0 [ 98.278] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge [ 98.279] (II) VESA: driver for VESA chipsets: vesa [ 98.279] (II) FBDEV: driver for framebuffer: fbdev [ 98.279] (++) using VT number 7 [ 98.282] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 98.282] (WW) Falling back to old probe method for vesa [ 98.282] (WW) Falling back to old probe method for fbdev [ 98.282] (II) Loading sub module "fbdevhw" [ 98.282] (II) LoadModule: "fbdevhw" [ 98.282] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 98.283] (II) Module fbdevhw: vendor="X.Org Foundation" [ 98.283] compiled for 1.10.0, module version = 0.0.2 [ 98.283] ABI class: X.Org Video Driver, version 10.0 [ 98.283] drmOpenDevice: node name is /dev/dri/card0 [ 98.283] drmOpenDevice: open result is 8, (OK) [ 98.283] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 98.283] drmOpenDevice: node name is /dev/dri/card0 [ 98.283] drmOpenDevice: open result is 8, (OK) [ 98.283] drmOpenByBusid: drmOpenMinor returns 8 [ 98.283] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 98.283] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 98.283] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 98.283] (==) intel(0): RGB weight 888 [ 98.283] (==) intel(0): Default visual is TrueColor [ 98.283] (II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM [ 98.283] (--) intel(0): Chipset: "915GM" [ 98.283] (**) intel(0): Tiling enabled [ 98.283] (**) intel(0): SwapBuffers wait enabled [ 98.283] (==) intel(0): video overlay key set to 0x101fe [ 98.283] (II) intel(0): Output LVDS1 has no monitor section [ 98.481] (II) intel(0): Output VGA1 has no monitor section [ 98.728] (II) intel(0): Output TV1 has no monitor section [ 98.728] (II) intel(0): EDID for output LVDS1 [ 98.728] (II) intel(0): Manufacturer: CMO Model: 1506 Serial#: 0 [ 98.728] (II) intel(0): Year: 2002 Week: 40 [ 98.728] (II) intel(0): EDID Version: 1.3 [ 98.728] (II) intel(0): Digital Display Input [ 98.728] (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 23 [ 98.728] (II) intel(0): Gamma: 2.20 [ 98.728] (II) intel(0): No DPMS capabilities specified [ 98.728] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 98.728] (II) intel(0): First detailed timing is preferred mode [ 98.728] (II) intel(0): redX: 0.626 redY: 0.354 greenX: 0.294 greenY: 0.589 [ 98.728] (II) intel(0): blueX: 0.144 blueY: 0.097 whiteX: 0.309 whiteY: 0.329 [ 98.728] (II) intel(0): Supported established timings: [ 98.728] (II) intel(0): 1024x768@60Hz [ 98.728] (II) intel(0): Manufacturer's mask: 0 [ 98.728] (II) intel(0): Supported detailed timing: [ 98.728] (II) intel(0): clock: 65.0 MHz Image Size: 304 x 228 mm [ 98.728] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0 [ 98.728] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0 [ 98.728] (II) intel(0): N150X3-L07 [ 98.728] (II) intel(0): CMO [ 98.728] (II) intel(0): N150X3-L07 [ 98.728] (II) intel(0): EDID (in hex): [ 98.728] (II) intel(0): 00ffffffffffff000daf061500000000 [ 98.728] (II) intel(0): 280c0103801e17780a77f1a05a4b9624 [ 98.728] (II) intel(0): 184f5400080001010101010101010101 [ 98.728] (II) intel(0): 01010101010164190040410026301888 [ 98.728] (II) intel(0): 360030e410000018000000fe004e3135 [ 98.728] (II) intel(0): 3058332d4c30370a2020000000fe0043 [ 98.728] (II) intel(0): 4d4f0a202020202020202020000000fe [ 98.728] (II) intel(0): 004e31353058332d4c30370a202000eb [ 98.728] (II) intel(0): EDID vendor "CMO", prod id 5382 [ 98.728] (II) intel(0): Printing DDC gathered Modelines: [ 98.729] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 98.729] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 98.729] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 98.729] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 98.729] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 98.729] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 98.729] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 98.729] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 98.729] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 98.729] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 98.729] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 98.729] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 98.729] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 98.729] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 98.729] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 98.729] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) [ 98.729] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) [ 98.729] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 98.729] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 98.729] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 98.729] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 98.729] (II) intel(0): Printing probed modes for output LVDS1 [ 98.729] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 98.729] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 98.729] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 98.729] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 98.833] (II) intel(0): EDID for output VGA1 [ 99.132] (II) intel(0): EDID for output TV1 [ 99.132] (II) intel(0): Output LVDS1 connected [ 99.132] (II) intel(0): Output VGA1 disconnected [ 99.132] (II) intel(0): Output TV1 disconnected [ 99.132] (II) intel(0): Using exact sizes for initial modes [ 99.132] (II) intel(0): Output LVDS1 using initial mode 1024x768 [ 99.132] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 99.132] (II) intel(0): Kernel page flipping support detected, enabling [ 99.132] (**) intel(0): Display dimensions: (300, 230) mm [ 99.132] (**) intel(0): DPI set to (86, 84) [ 99.132] (II) Loading sub module "fb" [ 99.132] (II) LoadModule: "fb" [ 99.133] (II) Loading /usr/lib/xorg/modules/libfb.so [ 99.133] (II) Module fb: vendor="X.Org Foundation" [ 99.133] compiled for 1.10.0, module version = 1.0.0 [ 99.133] ABI class: X.Org ANSI C Emulation, version 0.4 [ 99.133] (II) UnloadModule: "vesa" [ 99.133] (II) Unloading vesa [ 99.133] (II) UnloadModule: "fbdev" [ 99.133] (II) Unloading fbdev [ 99.133] (II) UnloadModule: "fbdevhw" [ 99.133] (II) Unloading fbdevhw [ 99.133] (==) Depth 24 pixmap format is 32 bpp [ 99.133] (==) intel(0): VideoRam: 262144 KB [ 99.133] (II) intel(0): [DRI2] Setup complete [ 99.133] (II) intel(0): [DRI2] DRI driver: i915 [ 99.133] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled [ 99.133] (II) UXA(0): Driver registered support for the following operations: [ 99.133] (II) solid [ 99.133] (II) copy [ 99.133] (II) composite (RENDER acceleration) [ 99.134] (II) put_image [ 99.134] (II) get_image [ 99.134] (==) intel(0): Backing store disabled [ 99.134] (==) intel(0): Silken mouse enabled [ 99.134] (II) intel(0): Initializing HW Cursor [ 99.172] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 99.172] (==) intel(0): DPMS enabled [ 99.172] (==) intel(0): Intel XvMC decoder disabled [ 99.172] (II) intel(0): Set up textured video [ 99.172] (II) intel(0): Set up overlay video [ 99.172] (II) intel(0): direct rendering: DRI2 Enabled [ 99.172] (==) intel(0): hotplug detection: "enabled" [ 99.173] (--) RandR disabled [ 99.173] (II) Initializing built-in extension Generic Event Extension [ 99.173] (II) Initializing built-in extension SHAPE [ 99.173] (II) Initializing built-in extension MIT-SHM [ 99.173] (II) Initializing built-in extension XInputExtension [ 99.173] (II) Initializing built-in extension XTEST [ 99.173] (II) Initializing built-in extension BIG-REQUESTS [ 99.173] (II) Initializing built-in extension SYNC [ 99.173] (II) Initializing built-in extension XKEYBOARD [ 99.173] (II) Initializing built-in extension XC-MISC [ 99.173] (II) Initializing built-in extension SECURITY [ 99.173] (II) Initializing built-in extension XINERAMA [ 99.173] (II) Initializing built-in extension XFIXES [ 99.173] (II) Initializing built-in extension RENDER [ 99.173] (II) Initializing built-in extension RANDR [ 99.173] (II) Initializing built-in extension COMPOSITE [ 99.173] (II) Initializing built-in extension DAMAGE [ 99.173] (II) Initializing built-in extension GESTURE [ 99.208] (II) AIGLX: Trying DRI driver /usr/lib/dri/i915_dri.so [ 99.217] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 99.217] (II) AIGLX: enabled GLX_INTEL_swap_event [ 99.217] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 99.217] (II) AIGLX: enabled GLX_SGI_make_current_read [ 99.217] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 99.217] (II) AIGLX: Loaded and initialized i915 [ 99.217] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 99.218] (II) intel(0): Setting screen physical size to 270 x 203 [ 99.302] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 99.335] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 99.336] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 99.336] (II) LoadModule: "evdev" [ 99.336] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 99.336] (II) Module evdev: vendor="X.Org Foundation" [ 99.336] compiled for 1.10.0, module version = 2.6.0 [ 99.336] Module class: X.Org XInput Driver [ 99.336] ABI class: X.Org XInput driver, version 12.3 [ 99.337] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 99.337] (**) Power Button: always reports core events [ 99.337] (**) Power Button: Device: "/dev/input/event2" [ 99.337] (--) Power Button: Found keys [ 99.337] (II) Power Button: Configuring as keyboard [ 99.337] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 99.337] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 99.337] (**) Option "xkb_rules" "evdev" [ 99.337] (**) Option "xkb_model" "pc105" [ 99.337] (**) Option "xkb_layout" "us" [ 99.338] (II) config/udev: Adding input device Video Bus (/dev/input/event5) [ 99.338] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 99.338] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 99.338] (**) Video Bus: always reports core events [ 99.338] (**) Video Bus: Device: "/dev/input/event5" [ 99.338] (--) Video Bus: Found keys [ 99.338] (II) Video Bus: Configuring as keyboard [ 99.338] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5" [ 99.338] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) [ 99.338] (**) Option "xkb_rules" "evdev" [ 99.338] (**) Option "xkb_model" "pc105" [ 99.338] (**) Option "xkb_layout" "us" [ 99.581] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 99.581] (II) No input driver/identifier specified (ignoring) [ 99.582] (II) config/udev: Adding input device Sleep Button (/dev/input/event1) [ 99.582] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 99.582] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 99.582] (**) Sleep Button: always reports core events [ 99.582] (**) Sleep Button: Device: "/dev/input/event1" [ 99.582] (--) Sleep Button: Found keys [ 99.582] (II) Sleep Button: Configuring as keyboard [ 99.582] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1" [ 99.582] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD) [ 99.582] (**) Option "xkb_rules" "evdev" [ 99.582] (**) Option "xkb_model" "pc105" [ 99.582] (**) Option "xkb_layout" "us" [ 99.590] (II) config/udev: Adding input device A4Tech PS/2+USB Mouse (/dev/input/event4) [ 99.590] (**) A4Tech PS/2+USB Mouse: Applying InputClass "evdev pointer catchall" [ 99.590] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 99.590] (**) A4Tech PS/2+USB Mouse: always reports core events [ 99.590] (**) A4Tech PS/2+USB Mouse: Device: "/dev/input/event4" [ 99.590] (--) A4Tech PS/2+USB Mouse: Found 12 mouse buttons [ 99.590] (--) A4Tech PS/2+USB Mouse: Found scroll wheel(s) [ 99.590] (--) A4Tech PS/2+USB Mouse: Found relative axes [ 99.590] (--) A4Tech PS/2+USB Mouse: Found x and y relative axes [ 99.590] (II) A4Tech PS/2+USB Mouse: Configuring as mouse [ 99.590] (II) A4Tech PS/2+USB Mouse: Adding scrollwheel support [ 99.590] (**) A4Tech PS/2+USB Mouse: YAxisMapping: buttons 4 and 5 [ 99.590] (**) A4Tech PS/2+USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 99.590] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4/event4" [ 99.590] (II) XINPUT: Adding extended input device "A4Tech PS/2+USB Mouse" (type: MOUSE) [ 99.590] (II) A4Tech PS/2+USB Mouse: initialized for relative axes. [ 99.590] (**) A4Tech PS/2+USB Mouse: (accel) keeping acceleration scheme 1 [ 99.590] (**) A4Tech PS/2+USB Mouse: (accel) acceleration profile 0 [ 99.591] (**) A4Tech PS/2+USB Mouse: (accel) acceleration factor: 2.000 [ 99.591] (**) A4Tech PS/2+USB Mouse: (accel) acceleration threshold: 4 [ 99.591] (II) config/udev: Adding input device A4Tech PS/2+USB Mouse (/dev/input/mouse0) [ 99.596] (II) No input driver/identifier specified (ignoring) [ 99.607] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 99.607] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 99.607] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 99.607] (**) AT Translated Set 2 keyboard: always reports core events [ 99.607] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3" [ 99.607] (--) AT Translated Set 2 keyboard: Found keys [ 99.607] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 99.607] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 99.607] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) [ 99.607] (**) Option "xkb_rules" "evdev" [ 99.607] (**) Option "xkb_model" "pc105" [ 99.607] (**) Option "xkb_layout" "us" [ 99.612] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6) [ 99.612] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 99.612] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 99.612] (II) LoadModule: "synaptics" [ 99.613] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 99.613] (II) Module synaptics: vendor="X.Org Foundation" [ 99.613] compiled for 1.10.0, module version = 1.3.99 [ 99.613] Module class: X.Org XInput Driver [ 99.613] ABI class: X.Org XInput driver, version 12.3 [ 99.613] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 99.613] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 99.613] (**) Option "Device" "/dev/input/event6" [ 99.613] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 [ 99.613] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 [ 99.613] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 99.613] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 99.613] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple scroll-buttons [ 99.613] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 99.613] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 99.613] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input6/event6" [ 99.613] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD) [ 99.613] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 99.613] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75 [ 99.614] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040 [ 99.614] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 99.614] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 99.614] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 99.614] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 99.614] (II) SynPS/2 Synaptics TouchPad: failed to open grail, no gesture support [ 99.614] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 99.614] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1) [ 99.614] (II) No input driver/identifier specified (ignoring) [ 100.694] (II) intel(0): EDID vendor "CMO", prod id 5382 [ 100.694] (II) intel(0): Printing DDC gathered Modelines: [ 100.694] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 101.088] (II) intel(0): EDID vendor "CMO", prod id 5382 [ 101.088] (II) intel(0): Printing DDC gathered Modelines: [ 101.089] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 102.616] (II) intel(0): EDID vendor "CMO", prod id 5382 [ 102.616] (II) intel(0): Printing DDC gathered Modelines: [ 102.616] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 3726.760] (II) XKB: reuse xkmfile /var/lib/xkb/server-50E90A887B36C8C94D6225935AF6A30441666B48.xkm [ 3816.054] (II) XKB: reuse xkmfile /var/lib/xkb/server-50E90A887B36C8C94D6225935AF6A30441666B48.xkm