[ 12.518] X.Org X Server 1.9.0 Release Date: 2010-08-20 [ 12.518] X Protocol Version 11, Revision 0 [ 12.518] Build Operating System: Linux 2.6.24-27-server i686 Ubuntu [ 12.518] Current Operating System: Linux david-HP-530-Notebook-PC 2.6.35-23-generic #40-Ubuntu SMP Wed Nov 17 22:15:35 UTC 2010 i686 [ 12.518] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-23-generic root=UUID=45bb42a0-89a4-4104-ae9a-0da86e30fab4 ro quiet splash [ 12.518] Build Date: 16 September 2010 05:39:22PM [ 12.518] xorg-server 2:1.9.0-0ubuntu7 (For technical support please see http://www.ubuntu.com/support) [ 12.518] Current version of pixman: 0.18.4 [ 12.518] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 12.518] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 12.518] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 26 20:01:13 2010 [ 12.549] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 12.564] (==) No Layout section. Using the first Screen section. [ 12.564] (==) No screen section available. Using defaults. [ 12.564] (**) |-->Screen "Default Screen Section" (0) [ 12.564] (**) | |-->Monitor "" [ 12.564] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 12.564] (==) Automatically adding devices [ 12.564] (==) Automatically enabling devices [ 12.579] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 12.579] Entry deleted from font path. [ 12.597] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins [ 12.597] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 12.597] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 12.597] (II) Loader magic: 0x81f8e00 [ 12.597] (II) Module ABI versions: [ 12.597] X.Org ANSI C Emulation: 0.4 [ 12.597] X.Org Video Driver: 8.0 [ 12.597] X.Org XInput driver : 11.0 [ 12.597] X.Org Server Extension : 4.0 [ 12.598] (--) PCI:*(0:0:2:0) 8086:27ae:103c:30d5 rev 3, Mem @ 0xf0400000/524288, 0xe0000000/268435456, 0xf0480000/262144, I/O @ 0x00003000/8 [ 12.598] (--) PCI: (0:0:2:1) 8086:27a6:103c:30d5 rev 3, Mem @ 0xf0500000/524288 [ 12.599] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 12.599] (II) LoadModule: "extmod" [ 12.600] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 12.612] (II) Module extmod: vendor="X.Org Foundation" [ 12.612] compiled for 1.9.0, module version = 1.0.0 [ 12.612] Module class: X.Org Server Extension [ 12.612] ABI class: X.Org Server Extension, version 4.0 [ 12.612] (II) Loading extension MIT-SCREEN-SAVER [ 12.612] (II) Loading extension XFree86-VidModeExtension [ 12.612] (II) Loading extension XFree86-DGA [ 12.612] (II) Loading extension DPMS [ 12.612] (II) Loading extension XVideo [ 12.612] (II) Loading extension XVideo-MotionCompensation [ 12.612] (II) Loading extension X-Resource [ 12.612] (II) LoadModule: "dbe" [ 12.612] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 12.658] (II) Module dbe: vendor="X.Org Foundation" [ 12.658] compiled for 1.9.0, module version = 1.0.0 [ 12.658] Module class: X.Org Server Extension [ 12.658] ABI class: X.Org Server Extension, version 4.0 [ 12.658] (II) Loading extension DOUBLE-BUFFER [ 12.658] (II) LoadModule: "glx" [ 12.658] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 12.868] (II) Module glx: vendor="X.Org Foundation" [ 12.868] compiled for 1.9.0, module version = 1.0.0 [ 12.868] ABI class: X.Org Server Extension, version 4.0 [ 12.868] (==) AIGLX enabled [ 12.868] (II) Loading extension GLX [ 12.868] (II) LoadModule: "record" [ 12.869] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 12.869] (II) Module record: vendor="X.Org Foundation" [ 12.869] compiled for 1.9.0, module version = 1.13.0 [ 12.869] Module class: X.Org Server Extension [ 12.869] ABI class: X.Org Server Extension, version 4.0 [ 12.869] (II) Loading extension RECORD [ 12.869] (II) LoadModule: "dri" [ 12.870] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 12.886] (II) Module dri: vendor="X.Org Foundation" [ 12.886] compiled for 1.9.0, module version = 1.0.0 [ 12.886] ABI class: X.Org Server Extension, version 4.0 [ 12.886] (II) Loading extension XFree86-DRI [ 12.886] (II) LoadModule: "dri2" [ 12.886] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 12.887] (II) Module dri2: vendor="X.Org Foundation" [ 12.887] compiled for 1.9.0, module version = 1.2.0 [ 12.887] ABI class: X.Org Server Extension, version 4.0 [ 12.887] (II) Loading extension DRI2 [ 12.887] (==) Matched intel as autoconfigured driver 0 [ 12.887] (==) Matched vesa as autoconfigured driver 1 [ 12.887] (==) Matched fbdev as autoconfigured driver 2 [ 12.887] (==) Assigned the driver to the xf86ConfigLayout [ 12.887] (II) LoadModule: "intel" [ 12.892] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 13.116] (II) Module intel: vendor="X.Org Foundation" [ 13.116] compiled for 1.9.0, module version = 2.12.0 [ 13.116] Module class: X.Org Video Driver [ 13.116] ABI class: X.Org Video Driver, version 8.0 [ 13.116] (II) LoadModule: "vesa" [ 13.117] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 13.138] (II) Module vesa: vendor="X.Org Foundation" [ 13.138] compiled for 1.8.99.905, module version = 2.3.0 [ 13.138] Module class: X.Org Video Driver [ 13.138] ABI class: X.Org Video Driver, version 8.0 [ 13.138] (II) LoadModule: "fbdev" [ 13.139] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 13.154] (II) Module fbdev: vendor="X.Org Foundation" [ 13.154] compiled for 1.8.99.905, module version = 0.4.2 [ 13.154] ABI class: X.Org Video Driver, version 8.0 [ 13.154] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge [ 13.155] (II) VESA: driver for VESA chipsets: vesa [ 13.155] (II) FBDEV: driver for framebuffer: fbdev [ 13.155] (++) using VT number 7 [ 13.155] (WW) Falling back to old probe method for vesa [ 13.155] (WW) Falling back to old probe method for fbdev [ 13.156] (II) Loading sub module "fbdevhw" [ 13.156] (II) LoadModule: "fbdevhw" [ 13.156] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 13.169] (II) Module fbdevhw: vendor="X.Org Foundation" [ 13.169] compiled for 1.9.0, module version = 0.0.2 [ 13.169] ABI class: X.Org Video Driver, version 8.0 [ 13.171] drmOpenDevice: node name is /dev/dri/card0 [ 13.171] drmOpenDevice: open result is 8, (OK) [ 13.171] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 13.171] drmOpenDevice: node name is /dev/dri/card0 [ 13.171] drmOpenDevice: open result is 8, (OK) [ 13.171] drmOpenByBusid: drmOpenMinor returns 8 [ 13.171] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 13.171] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 13.171] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 13.171] (==) intel(0): RGB weight 888 [ 13.171] (==) intel(0): Default visual is TrueColor [ 13.171] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME [ 13.171] (--) intel(0): Chipset: "945GME" [ 13.171] (==) intel(0): video overlay key set to 0x101fe [ 13.204] (II) intel(0): Output VGA1 has no monitor section [ 13.204] (II) intel(0): Output LVDS1 has no monitor section [ 13.204] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 [ 13.236] (II) intel(0): EDID for output VGA1 [ 13.236] (II) intel(0): EDID for output LVDS1 [ 13.236] (II) intel(0): Manufacturer: CMO Model: 1526 Serial#: 0 [ 13.236] (II) intel(0): Year: 2006 Week: 9 [ 13.236] (II) intel(0): EDID Version: 1.3 [ 13.236] (II) intel(0): Digital Display Input [ 13.236] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21 [ 13.236] (II) intel(0): Gamma: 2.20 [ 13.236] (II) intel(0): No DPMS capabilities specified [ 13.236] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 13.236] (II) intel(0): First detailed timing is preferred mode [ 13.236] (II) intel(0): redX: 0.604 redY: 0.340 greenX: 0.306 greenY: 0.521 [ 13.236] (II) intel(0): blueX: 0.150 blueY: 0.119 whiteX: 0.314 whiteY: 0.321 [ 13.236] (II) intel(0): Manufacturer's mask: 0 [ 13.236] (II) intel(0): Supported detailed timing: [ 13.236] (II) intel(0): clock: 71.0 MHz Image Size: 331 x 207 mm [ 13.236] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0 [ 13.236] (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0 [ 13.236] (II) intel(0): N154I2-L02 [ 13.236] (II) intel(0): CMO [ 13.236] (II) intel(0): N154I2-L02 [ 13.236] (II) intel(0): EDID (in hex): [ 13.236] (II) intel(0): 00ffffffffffff000daf261500000000 [ 13.236] (II) intel(0): 09100103802115780ac6a99a574e8526 [ 13.236] (II) intel(0): 1e505200000001010101010101010101 [ 13.236] (II) intel(0): 010101010101bc1b00a0502017303020 [ 13.236] (II) intel(0): 36004bcf10000018000000fe004e3135 [ 13.236] (II) intel(0): 3449322d4c30320a2020000000fe0043 [ 13.236] (II) intel(0): 4d4f0a202020202020202020000000fe [ 13.236] (II) intel(0): 004e31353449322d4c30320a20200088 [ 13.237] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 13.237] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 13.237] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 13.237] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 13.237] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 13.237] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 13.237] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 13.237] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 13.237] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 13.237] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 13.237] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 13.237] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 13.237] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 13.237] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 13.237] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) [ 13.237] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) [ 13.237] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 13.237] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 13.237] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 13.237] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 13.237] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 13.237] (II) intel(0): Printing probed modes for output LVDS1 [ 13.237] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 13.237] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 13.237] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 13.237] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 13.237] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 13.237] (II) intel(0): Output VGA1 disconnected [ 13.237] (II) intel(0): Output LVDS1 connected [ 13.237] (II) intel(0): Using exact sizes for initial modes [ 13.237] (II) intel(0): Output LVDS1 using initial mode 1280x800 [ 13.237] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 13.237] (II) intel(0): Kernel page flipping support detected, but forcibly disabled. [ 13.237] (==) intel(0): DPI set to (96, 96) [ 13.237] (II) Loading sub module "fb" [ 13.237] (II) LoadModule: "fb" [ 13.238] (II) Loading /usr/lib/xorg/modules/libfb.so [ 13.241] (II) Module fb: vendor="X.Org Foundation" [ 13.241] compiled for 1.9.0, module version = 1.0.0 [ 13.241] ABI class: X.Org ANSI C Emulation, version 0.4 [ 13.241] (II) UnloadModule: "vesa" [ 13.241] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 13.241] (II) UnloadModule: "fbdev" [ 13.241] (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 13.241] (II) UnloadModule: "fbdevhw" [ 13.241] (II) Unloading /usr/lib/xorg/modules/libfbdevhw.so [ 13.241] (==) Depth 24 pixmap format is 32 bpp [ 13.241] (II) intel(0): [DRI2] Setup complete [ 13.241] (II) intel(0): [DRI2] DRI driver: i915 [ 13.241] (**) intel(0): Tiling enabled [ 13.241] (**) intel(0): SwapBuffers wait enabled [ 13.241] (==) intel(0): VideoRam: 262144 KB [ 13.241] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled [ 13.317] (II) UXA(0): Driver registered support for the following operations: [ 13.317] (II) solid [ 13.317] (II) copy [ 13.317] (II) composite (RENDER acceleration) [ 13.317] (II) put_image [ 13.317] (II) get_image [ 13.317] (==) intel(0): Backing store disabled [ 13.317] (==) intel(0): Silken mouse enabled [ 13.332] (II) intel(0): Initializing HW Cursor [ 13.372] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 13.374] (==) intel(0): DPMS enabled [ 13.374] (==) intel(0): Intel XvMC decoder disabled [ 13.374] (II) intel(0): Set up textured video [ 13.374] (II) intel(0): Set up overlay video [ 13.374] (II) intel(0): direct rendering: DRI2 Enabled [ 13.374] (--) RandR disabled [ 13.374] (II) Initializing built-in extension Generic Event Extension [ 13.374] (II) Initializing built-in extension SHAPE [ 13.374] (II) Initializing built-in extension MIT-SHM [ 13.375] (II) Initializing built-in extension XInputExtension [ 13.375] (II) Initializing built-in extension XTEST [ 13.375] (II) Initializing built-in extension BIG-REQUESTS [ 13.375] (II) Initializing built-in extension SYNC [ 13.375] (II) Initializing built-in extension XKEYBOARD [ 13.375] (II) Initializing built-in extension XC-MISC [ 13.375] (II) Initializing built-in extension SECURITY [ 13.375] (II) Initializing built-in extension XINERAMA [ 13.375] (II) Initializing built-in extension XFIXES [ 13.375] (II) Initializing built-in extension RENDER [ 13.375] (II) Initializing built-in extension RANDR [ 13.375] (II) Initializing built-in extension COMPOSITE [ 13.375] (II) Initializing built-in extension DAMAGE [ 13.375] (II) Initializing built-in extension GESTURE [ 13.583] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 13.583] (II) AIGLX: enabled GLX_INTEL_swap_event [ 13.583] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 13.583] (II) AIGLX: enabled GLX_SGI_make_current_read [ 13.583] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 13.584] (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so [ 13.584] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 13.584] (II) intel(0): Setting screen physical size to 338 x 211 [ 14.172] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 14.188] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 14.189] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 14.189] (II) LoadModule: "evdev" [ 14.189] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 14.255] (II) Module evdev: vendor="X.Org Foundation" [ 14.255] compiled for 1.9.0, module version = 2.3.2 [ 14.255] Module class: X.Org XInput Driver [ 14.255] ABI class: X.Org XInput driver, version 11.0 [ 14.255] (**) Power Button: always reports core events [ 14.255] (**) Power Button: Device: "/dev/input/event2" [ 14.255] (II) Power Button: Found keys [ 14.255] (II) Power Button: Configuring as keyboard [ 14.255] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 14.255] (**) Option "xkb_rules" "evdev" [ 14.255] (**) Option "xkb_model" "pc105" [ 14.255] (**) Option "xkb_layout" "us" [ 14.256] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 14.256] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 14.256] (**) Video Bus: always reports core events [ 14.256] (**) Video Bus: Device: "/dev/input/event4" [ 14.256] (II) Video Bus: Found keys [ 14.256] (II) Video Bus: Configuring as keyboard [ 14.256] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) [ 14.256] (**) Option "xkb_rules" "evdev" [ 14.257] (**) Option "xkb_model" "pc105" [ 14.257] (**) Option "xkb_layout" "us" [ 14.259] (II) config/udev: Adding input device Lid Switch (/dev/input/event1) [ 14.259] (II) No input driver/identifier specified (ignoring) [ 14.259] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 14.259] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 14.259] (**) Sleep Button: always reports core events [ 14.259] (**) Sleep Button: Device: "/dev/input/event0" [ 14.272] (II) Sleep Button: Found keys [ 14.272] (II) Sleep Button: Configuring as keyboard [ 14.272] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD) [ 14.272] (**) Option "xkb_rules" "evdev" [ 14.272] (**) Option "xkb_model" "pc105" [ 14.272] (**) Option "xkb_layout" "us" [ 14.277] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 14.277] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 14.277] (**) AT Translated Set 2 keyboard: always reports core events [ 14.277] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3" [ 14.296] (II) AT Translated Set 2 keyboard: Found keys [ 14.296] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 14.296] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) [ 14.296] (**) Option "xkb_rules" "evdev" [ 14.296] (**) Option "xkb_model" "pc105" [ 14.296] (**) Option "xkb_layout" "us" [ 14.296] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6) [ 14.297] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 14.297] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 14.297] (II) LoadModule: "synaptics" [ 14.297] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 14.303] (II) Module synaptics: vendor="X.Org Foundation" [ 14.304] compiled for 1.9.0, module version = 1.2.2 [ 14.304] Module class: X.Org XInput Driver [ 14.304] ABI class: X.Org XInput driver, version 11.0 [ 14.304] (II) Synaptics touchpad driver version 1.2.2 [ 14.304] (**) Option "Device" "/dev/input/event6" [ 14.368] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 [ 14.368] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 [ 14.368] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 14.368] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0 [ 14.368] (II) SynPS/2 Synaptics TouchPad: buttons: left right [ 14.400] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 14.400] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 14.424] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD) [ 14.424] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 14.424] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0 [ 14.424] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 14.424] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 14.457] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 14.457] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 14.457] (II) No input driver/identifier specified (ignoring) [ 14.461] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event5) [ 14.461] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 14.461] (**) HP WMI hotkeys: always reports core events [ 14.461] (**) HP WMI hotkeys: Device: "/dev/input/event5" [ 14.476] (II) HP WMI hotkeys: Found keys [ 14.476] (II) HP WMI hotkeys: Configuring as keyboard [ 14.476] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD) [ 14.476] (**) Option "xkb_rules" "evdev" [ 14.476] (**) Option "xkb_model" "pc105" [ 14.476] (**) Option "xkb_layout" "us" [ 17.196] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 17.196] (II) intel(0): Printing DDC gathered Modelines: [ 17.196] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 17.228] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 17.228] (II) intel(0): Printing DDC gathered Modelines: [ 17.228] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 17.273] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 17.273] (II) intel(0): Printing DDC gathered Modelines: [ 17.273] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 17.304] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 17.304] (II) intel(0): Printing DDC gathered Modelines: [ 17.304] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 21.509] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 21.509] (II) intel(0): Printing DDC gathered Modelines: [ 21.509] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 32.241] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 32.241] (II) intel(0): Printing DDC gathered Modelines: [ 32.241] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 32.276] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 32.276] (II) intel(0): Printing DDC gathered Modelines: [ 32.276] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 32.308] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 32.308] (II) intel(0): Printing DDC gathered Modelines: [ 32.308] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 32.409] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 32.409] (II) intel(0): Printing DDC gathered Modelines: [ 32.409] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 35.773] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 35.773] (II) intel(0): Printing DDC gathered Modelines: [ 35.773] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 39.825] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 39.825] (II) intel(0): Printing DDC gathered Modelines: [ 39.825] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 62.537] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 62.537] (II) intel(0): Printing DDC gathered Modelines: [ 62.537] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 62.584] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 62.584] (II) intel(0): Printing DDC gathered Modelines: [ 62.584] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 89.212] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 89.212] (II) intel(0): Printing DDC gathered Modelines: [ 89.212] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 89.244] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 89.244] (II) intel(0): Printing DDC gathered Modelines: [ 89.244] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 117.728] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 117.728] (II) intel(0): Printing DDC gathered Modelines: [ 117.728] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 117.760] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 117.760] (II) intel(0): Printing DDC gathered Modelines: [ 117.760] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 149.544] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 149.544] (II) intel(0): Printing DDC gathered Modelines: [ 149.544] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 149.584] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 149.584] (II) intel(0): Printing DDC gathered Modelines: [ 149.584] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 321.184] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 321.184] (II) intel(0): Printing DDC gathered Modelines: [ 321.184] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 321.216] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 321.216] (II) intel(0): Printing DDC gathered Modelines: [ 321.216] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 541.216] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 541.216] (II) intel(0): Printing DDC gathered Modelines: [ 541.216] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 541.248] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 541.248] (II) intel(0): Printing DDC gathered Modelines: [ 541.248] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 607.436] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 607.436] (II) intel(0): Printing DDC gathered Modelines: [ 607.436] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 607.468] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 607.468] (II) intel(0): Printing DDC gathered Modelines: [ 607.468] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 665.177] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 665.177] (II) intel(0): Printing DDC gathered Modelines: [ 665.177] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 665.208] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 665.208] (II) intel(0): Printing DDC gathered Modelines: [ 665.208] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 10248.097] (II) AIGLX: Suspending AIGLX clients for VT switch [ 10252.327] (II) Open ACPI successful (/var/run/acpid.socket) [ 10252.327] (II) AIGLX: Resuming AIGLX clients after VT switch [ 10252.327] (EE) intel(0): Couldn't create pixmap for fbcon [ 10252.380] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 10252.380] (II) intel(0): Printing DDC gathered Modelines: [ 10252.380] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 10252.450] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 10252.508] (II) Power Button: Device reopened after 1 attempts. [ 10252.517] (II) Video Bus: Device reopened after 1 attempts. [ 10252.529] (II) Sleep Button: Device reopened after 1 attempts. [ 10252.537] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 10252.576] (II) HP WMI hotkeys: Device reopened after 1 attempts. [ 16433.041] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 16433.189] (II) intel(0): Printing DDC gathered Modelines: [ 16433.189] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 18239.189] (II) AIGLX: Suspending AIGLX clients for VT switch [ 18243.448] (II) Open ACPI successful (/var/run/acpid.socket) [ 18243.448] (II) AIGLX: Resuming AIGLX clients after VT switch [ 18243.448] (EE) intel(0): Couldn't create pixmap for fbcon [ 18243.504] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 18243.504] (II) intel(0): Printing DDC gathered Modelines: [ 18243.504] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 18243.597] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 18243.677] (II) Power Button: Device reopened after 1 attempts. [ 18243.685] (II) Video Bus: Device reopened after 1 attempts. [ 18243.697] (II) Sleep Button: Device reopened after 1 attempts. [ 18243.709] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 18243.722] (II) HP WMI hotkeys: Device reopened after 1 attempts. [ 18251.420] (II) AIGLX: Suspending AIGLX clients for VT switch [ 18254.683] (II) Open ACPI successful (/var/run/acpid.socket) [ 18254.683] (II) AIGLX: Resuming AIGLX clients after VT switch [ 18254.683] (EE) intel(0): Couldn't create pixmap for fbcon [ 18254.737] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 18254.737] (II) intel(0): Printing DDC gathered Modelines: [ 18254.737] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 18254.765] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 18254.881] (II) Power Button: Device reopened after 1 attempts. [ 18254.897] (II) Video Bus: Device reopened after 1 attempts. [ 18254.909] (II) Sleep Button: Device reopened after 1 attempts. [ 18254.921] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 18254.929] (II) HP WMI hotkeys: Device reopened after 1 attempts. [ 23587.016] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 23587.016] (II) intel(0): Printing DDC gathered Modelines: [ 23587.016] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 25389.948] (II) AIGLX: Suspending AIGLX clients for VT switch [ 25394.179] (II) Open ACPI successful (/var/run/acpid.socket) [ 25394.179] (II) AIGLX: Resuming AIGLX clients after VT switch [ 25394.179] (EE) intel(0): Couldn't create pixmap for fbcon [ 25394.235] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 25394.235] (II) intel(0): Printing DDC gathered Modelines: [ 25394.235] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 25394.310] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 25394.360] (II) Power Button: Device reopened after 1 attempts. [ 25394.374] (II) Video Bus: Device reopened after 1 attempts. [ 25394.380] (II) Sleep Button: Device reopened after 1 attempts. [ 25394.388] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 25394.416] (II) HP WMI hotkeys: Device reopened after 1 attempts. [ 27346.000] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 27346.000] (II) intel(0): Printing DDC gathered Modelines: [ 27346.000] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 29150.241] (II) AIGLX: Suspending AIGLX clients for VT switch [ 29154.455] (II) Open ACPI successful (/var/run/acpid.socket) [ 29154.455] (II) AIGLX: Resuming AIGLX clients after VT switch [ 29154.455] (EE) intel(0): Couldn't create pixmap for fbcon [ 29154.512] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 29154.512] (II) intel(0): Printing DDC gathered Modelines: [ 29154.512] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 29154.557] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 29154.641] (II) Power Button: Device reopened after 1 attempts. [ 29154.649] (II) Video Bus: Device reopened after 1 attempts. [ 29154.661] (II) Sleep Button: Device reopened after 1 attempts. [ 29154.673] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 29154.685] (II) HP WMI hotkeys: Device reopened after 1 attempts. [ 29740.740] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 29740.740] (II) intel(0): Printing DDC gathered Modelines: [ 29740.740] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 30290.396] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 30290.396] (II) intel(0): Printing DDC gathered Modelines: [ 30290.396] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 38285.636] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 38285.652] (II) intel(0): Printing DDC gathered Modelines: [ 38285.652] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 40090.369] (II) AIGLX: Suspending AIGLX clients for VT switch [ 40094.566] (II) Open ACPI successful (/var/run/acpid.socket) [ 40094.566] (II) AIGLX: Resuming AIGLX clients after VT switch [ 40094.567] (EE) intel(0): Couldn't create pixmap for fbcon [ 40094.633] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 40094.633] (II) intel(0): Printing DDC gathered Modelines: [ 40094.633] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 40094.740] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 40094.841] (II) Power Button: Device reopened after 1 attempts. [ 40094.853] (II) Video Bus: Device reopened after 1 attempts. [ 40094.861] (II) Sleep Button: Device reopened after 1 attempts. [ 40094.873] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 40094.882] (II) HP WMI hotkeys: Device reopened after 1 attempts. [ 44764.537] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 44764.537] (II) intel(0): Printing DDC gathered Modelines: [ 44764.537] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 46569.036] (II) AIGLX: Suspending AIGLX clients for VT switch [ 46573.323] (II) Open ACPI successful (/var/run/acpid.socket) [ 46573.323] (II) AIGLX: Resuming AIGLX clients after VT switch [ 46573.323] (EE) intel(0): Couldn't create pixmap for fbcon [ 46573.380] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 46573.380] (II) intel(0): Printing DDC gathered Modelines: [ 46573.380] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 46573.468] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 46573.533] (II) Power Button: Device reopened after 1 attempts. [ 46573.548] (II) Video Bus: Device reopened after 1 attempts. [ 46573.564] (II) Sleep Button: Device reopened after 1 attempts. [ 46573.576] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 46573.592] (II) HP WMI hotkeys: Device reopened after 1 attempts. [ 49186.292] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 49186.292] (II) intel(0): Printing DDC gathered Modelines: [ 49186.292] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 50989.797] (II) AIGLX: Suspending AIGLX clients for VT switch [ 50994.034] (II) Open ACPI successful (/var/run/acpid.socket) [ 50994.034] (II) AIGLX: Resuming AIGLX clients after VT switch [ 50994.035] (EE) intel(0): Couldn't create pixmap for fbcon [ 50994.088] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 50994.088] (II) intel(0): Printing DDC gathered Modelines: [ 50994.088] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 50994.153] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 50994.237] (II) Power Button: Device reopened after 1 attempts. [ 50994.249] (II) Video Bus: Device reopened after 1 attempts. [ 50994.257] (II) Sleep Button: Device reopened after 1 attempts. [ 50994.265] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 50994.277] (II) HP WMI hotkeys: Device reopened after 1 attempts. [ 52565.468] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 52565.468] (II) intel(0): Printing DDC gathered Modelines: [ 52565.468] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 54368.792] (II) AIGLX: Suspending AIGLX clients for VT switch [ 54372.951] (II) Open ACPI successful (/var/run/acpid.socket) [ 54372.951] (II) AIGLX: Resuming AIGLX clients after VT switch [ 54372.951] (EE) intel(0): Couldn't create pixmap for fbcon [ 54373.004] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 54373.004] (II) intel(0): Printing DDC gathered Modelines: [ 54373.004] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 54373.089] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 54373.161] (II) Power Button: Device reopened after 1 attempts. [ 54373.169] (II) Video Bus: Device reopened after 1 attempts. [ 54373.181] (II) Sleep Button: Device reopened after 1 attempts. [ 54373.189] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 54373.201] (II) HP WMI hotkeys: Device reopened after 1 attempts. [ 54377.232] (II) AIGLX: Suspending AIGLX clients for VT switch [ 54380.934] (II) Open ACPI successful (/var/run/acpid.socket) [ 54380.934] (II) AIGLX: Resuming AIGLX clients after VT switch [ 54380.934] (EE) intel(0): Couldn't create pixmap for fbcon [ 54381.001] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 54381.001] (II) intel(0): Printing DDC gathered Modelines: [ 54381.001] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 54381.061] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 54381.141] (II) Power Button: Device reopened after 1 attempts. [ 54381.153] (II) Video Bus: Device reopened after 1 attempts. [ 54381.161] (II) Sleep Button: Device reopened after 1 attempts. [ 54381.173] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 54381.185] (II) HP WMI hotkeys: Device reopened after 1 attempts. [ 55738.088] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 55738.088] (II) intel(0): Printing DDC gathered Modelines: [ 55738.088] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 57541.880] (II) AIGLX: Suspending AIGLX clients for VT switch [ 57546.115] (II) Open ACPI successful (/var/run/acpid.socket) [ 57546.115] (II) AIGLX: Resuming AIGLX clients after VT switch [ 57546.115] (EE) intel(0): Couldn't create pixmap for fbcon [ 57546.172] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 57546.172] (II) intel(0): Printing DDC gathered Modelines: [ 57546.172] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 57546.213] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 57546.297] (II) Power Button: Device reopened after 1 attempts. [ 57546.309] (II) Video Bus: Device reopened after 1 attempts. [ 57546.321] (II) Sleep Button: Device reopened after 1 attempts. [ 57546.333] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 57546.349] (II) HP WMI hotkeys: Device reopened after 1 attempts. [ 57552.596] (II) AIGLX: Suspending AIGLX clients for VT switch [ 57555.652] (II) Open ACPI successful (/var/run/acpid.socket) [ 57555.652] (II) AIGLX: Resuming AIGLX clients after VT switch [ 57555.653] (EE) intel(0): Couldn't create pixmap for fbcon [ 57555.708] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 57555.708] (II) intel(0): Printing DDC gathered Modelines: [ 57555.708] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 57555.745] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 57555.821] (II) Power Button: Device reopened after 1 attempts. [ 57555.829] (II) Video Bus: Device reopened after 1 attempts. [ 57555.841] (II) Sleep Button: Device reopened after 1 attempts. [ 57555.853] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 57555.865] (II) HP WMI hotkeys: Device reopened after 1 attempts. [ 58928.220] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 58928.220] (II) intel(0): Printing DDC gathered Modelines: [ 58928.220] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 59275.532] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 59275.532] (II) intel(0): Printing DDC gathered Modelines: [ 59275.532] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 61532.656] (II) AIGLX: Suspending AIGLX clients for VT switch [ 61536.951] (II) Open ACPI successful (/var/run/acpid.socket) [ 61536.951] (II) AIGLX: Resuming AIGLX clients after VT switch [ 61536.951] (EE) intel(0): Couldn't create pixmap for fbcon [ 61537.025] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 61537.025] (II) intel(0): Printing DDC gathered Modelines: [ 61537.025] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 61537.064] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 61537.160] (II) Power Button: Device reopened after 1 attempts. [ 61537.172] (II) Video Bus: Device reopened after 1 attempts. [ 61537.188] (II) Sleep Button: Device reopened after 1 attempts. [ 61537.200] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 61537.212] (II) HP WMI hotkeys: Device reopened after 1 attempts. [ 63031.844] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 63031.844] (II) intel(0): Printing DDC gathered Modelines: [ 63031.844] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 64835.125] (II) AIGLX: Suspending AIGLX clients for VT switch [ 64839.421] (II) Open ACPI successful (/var/run/acpid.socket) [ 64839.421] (II) AIGLX: Resuming AIGLX clients after VT switch [ 64839.421] (EE) intel(0): Couldn't create pixmap for fbcon [ 64839.464] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 64839.464] (II) intel(0): Printing DDC gathered Modelines: [ 64839.464] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 64839.524] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 64839.589] (II) Power Button: Device reopened after 1 attempts. [ 64839.597] (II) Video Bus: Device reopened after 1 attempts. [ 64839.605] (II) Sleep Button: Device reopened after 1 attempts. [ 64839.617] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 64839.653] (II) HP WMI hotkeys: Device reopened after 1 attempts. [ 64843.596] (II) AIGLX: Suspending AIGLX clients for VT switch [ 64846.554] (II) Open ACPI successful (/var/run/acpid.socket) [ 64846.554] (II) AIGLX: Resuming AIGLX clients after VT switch [ 64846.554] (EE) intel(0): Couldn't create pixmap for fbcon [ 64846.621] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 64846.621] (II) intel(0): Printing DDC gathered Modelines: [ 64846.621] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 64846.677] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 64846.761] (II) Power Button: Device reopened after 1 attempts. [ 64846.773] (II) Video Bus: Device reopened after 1 attempts. [ 64846.781] (II) Sleep Button: Device reopened after 1 attempts. [ 64846.793] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 64846.801] (II) HP WMI hotkeys: Device reopened after 1 attempts. [ 64879.772] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 64879.772] (II) intel(0): Printing DDC gathered Modelines: [ 64879.772] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 64879.804] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 64879.804] (II) intel(0): Printing DDC gathered Modelines: [ 64879.804] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 71001.776] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 71001.776] (II) intel(0): Printing DDC gathered Modelines: [ 71001.776] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 72804.817] (II) AIGLX: Suspending AIGLX clients for VT switch [ 72809.069] (II) Open ACPI successful (/var/run/acpid.socket) [ 72809.069] (II) AIGLX: Resuming AIGLX clients after VT switch [ 72809.069] (EE) intel(0): Couldn't create pixmap for fbcon [ 72809.124] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 72809.124] (II) intel(0): Printing DDC gathered Modelines: [ 72809.124] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 72809.161] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 72809.241] (II) Power Button: Device reopened after 1 attempts. [ 72809.252] (II) Video Bus: Device reopened after 1 attempts. [ 72809.268] (II) Sleep Button: Device reopened after 1 attempts. [ 72809.280] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 72809.292] (II) HP WMI hotkeys: Device reopened after 1 attempts. [ 72812.645] (II) AIGLX: Suspending AIGLX clients for VT switch [ 72816.783] (II) Open ACPI successful (/var/run/acpid.socket) [ 72816.783] (II) AIGLX: Resuming AIGLX clients after VT switch [ 72816.783] (EE) intel(0): Couldn't create pixmap for fbcon [ 72816.840] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 72816.840] (II) intel(0): Printing DDC gathered Modelines: [ 72816.840] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 72816.893] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 72816.966] (II) Power Button: Device reopened after 1 attempts. [ 72816.973] (II) Video Bus: Device reopened after 1 attempts. [ 72816.981] (II) Sleep Button: Device reopened after 1 attempts. [ 72816.989] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 72817.005] (II) HP WMI hotkeys: Device reopened after 1 attempts. [ 82018.955] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 82018.970] (II) intel(0): Printing DDC gathered Modelines: [ 82018.970] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 85217.360] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 85217.360] (II) intel(0): Printing DDC gathered Modelines: [ 85217.360] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 87022.913] (II) AIGLX: Suspending AIGLX clients for VT switch [ 87027.099] (II) Open ACPI successful (/var/run/acpid.socket) [ 87027.099] (II) AIGLX: Resuming AIGLX clients after VT switch [ 87027.099] (EE) intel(0): Couldn't create pixmap for fbcon [ 87027.158] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 87027.158] (II) intel(0): Printing DDC gathered Modelines: [ 87027.158] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 87027.249] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 87027.339] (II) Power Button: Device reopened after 1 attempts. [ 87027.349] (II) Video Bus: Device reopened after 1 attempts. [ 87027.357] (II) Sleep Button: Device reopened after 1 attempts. [ 87027.365] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 87027.373] (II) HP WMI hotkeys: Device reopened after 1 attempts. [ 88219.540] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 88219.540] (II) intel(0): Printing DDC gathered Modelines: [ 88219.540] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 88739.612] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 88739.612] (II) intel(0): Printing DDC gathered Modelines: [ 88739.612] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 98326.816] (II) AIGLX: Suspending AIGLX clients for VT switch [ 98331.115] (II) Open ACPI successful (/var/run/acpid.socket) [ 98331.116] (II) AIGLX: Resuming AIGLX clients after VT switch [ 98331.116] (EE) intel(0): Couldn't create pixmap for fbcon [ 98331.168] (II) intel(0): EDID vendor "CMO", prod id 5414 [ 98331.168] (II) intel(0): Printing DDC gathered Modelines: [ 98331.168] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [ 98331.233] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 98331.308] (II) Power Button: Device reopened after 1 attempts. [ 98331.320] (II) Video Bus: Device reopened after 1 attempts. [ 98331.336] (II) Sleep Button: Device reopened after 1 attempts. [ 98331.428] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 98331.440] (II) HP WMI hotkeys: Device reopened after 1 attempts. [102148.637] (II) intel(0): EDID vendor "CMO", prod id 5414 [102148.651] (II) intel(0): Printing DDC gathered Modelines: [102148.652] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [102529.566] (II) intel(0): EDID vendor "CMO", prod id 5414 [102529.566] (II) intel(0): Printing DDC gathered Modelines: [102529.566] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [103378.990] (II) intel(0): EDID vendor "CMO", prod id 5414 [103379.251] (II) intel(0): Printing DDC gathered Modelines: [103379.251] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [105184.592] (II) AIGLX: Suspending AIGLX clients for VT switch [105188.807] (II) Open ACPI successful (/var/run/acpid.socket) [105188.807] (II) AIGLX: Resuming AIGLX clients after VT switch [105188.807] (EE) intel(0): Couldn't create pixmap for fbcon [105188.945] (II) intel(0): EDID vendor "CMO", prod id 5414 [105188.945] (II) intel(0): Printing DDC gathered Modelines: [105188.945] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [105188.993] (--) SynPS/2 Synaptics TouchPad: touchpad found [105189.093] (II) Power Button: Device reopened after 1 attempts. [105189.101] (II) Video Bus: Device reopened after 1 attempts. [105189.111] (II) Sleep Button: Device reopened after 1 attempts. [105189.117] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [105189.125] (II) HP WMI hotkeys: Device reopened after 1 attempts. [107075.783] (II) intel(0): EDID vendor "CMO", prod id 5414 [107075.783] (II) intel(0): Printing DDC gathered Modelines: [107075.783] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [107076.327] (II) intel(0): EDID vendor "CMO", prod id 5414 [107076.327] (II) intel(0): Printing DDC gathered Modelines: [107076.327] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [107076.670] (EE) intel(0): Failed to set tiling on frontbuffer. [107076.670] (II) intel(0): Allocated new frame buffer 2560x1024 stride 10240, untiled [107109.582] (II) intel(0): EDID vendor "CMO", prod id 5414 [107109.582] (II) intel(0): Printing DDC gathered Modelines: [107109.582] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [107109.746] (II) intel(0): EDID vendor "CMO", prod id 5414 [107109.746] (II) intel(0): Printing DDC gathered Modelines: [107109.746] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [107164.706] (II) intel(0): EDID vendor "CMO", prod id 5414 [107164.706] (II) intel(0): Printing DDC gathered Modelines: [107164.706] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [107260.826] (II) intel(0): EDID vendor "CMO", prod id 5414 [107260.826] (II) intel(0): Printing DDC gathered Modelines: [107260.826] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [107267.562] (II) intel(0): EDID vendor "CMO", prod id 5414 [107267.562] (II) intel(0): Printing DDC gathered Modelines: [107267.562] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [107267.706] (II) intel(0): EDID vendor "CMO", prod id 5414 [107267.706] (II) intel(0): Printing DDC gathered Modelines: [107267.706] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [107268.016] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled [107282.855] (II) intel(0): EDID vendor "CMO", prod id 5414 [107282.855] (II) intel(0): Printing DDC gathered Modelines: [107282.855] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [107298.282] (II) intel(0): EDID vendor "CMO", prod id 5414 [107298.282] (II) intel(0): Printing DDC gathered Modelines: [107298.282] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [107301.562] (II) intel(0): EDID vendor "CMO", prod id 5414 [107301.562] (II) intel(0): Printing DDC gathered Modelines: [107301.562] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [107301.710] (II) intel(0): EDID vendor "CMO", prod id 5414 [107301.710] (II) intel(0): Printing DDC gathered Modelines: [107301.710] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [107301.799] (EE) intel(0): Failed to set tiling on frontbuffer. [107301.799] (II) intel(0): Allocated new frame buffer 2560x1024 stride 10240, untiled [107321.891] (II) intel(0): EDID vendor "CMO", prod id 5414 [107321.891] (II) intel(0): Printing DDC gathered Modelines: [107321.891] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [108442.076] (II) intel(0): EDID vendor "CMO", prod id 5414 [108442.076] (II) intel(0): Printing DDC gathered Modelines: [108442.076] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [108442.116] (II) intel(0): EDID vendor "CMO", prod id 5414 [108442.116] (II) intel(0): Printing DDC gathered Modelines: [108442.116] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [108442.147] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled [108472.609] (II) intel(0): EDID vendor "CMO", prod id 5414 [108472.609] (II) intel(0): Printing DDC gathered Modelines: [108472.609] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [109318.325] (II) intel(0): EDID vendor "CMO", prod id 5414 [109318.325] (II) intel(0): Printing DDC gathered Modelines: [109318.325] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [109349.742] (II) intel(0): EDID vendor "CMO", prod id 5414 [109349.742] (II) intel(0): Printing DDC gathered Modelines: [109349.742] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [109349.870] (II) intel(0): EDID vendor "CMO", prod id 5414 [109349.870] (II) intel(0): Printing DDC gathered Modelines: [109349.870] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [109349.952] (EE) intel(0): Failed to set tiling on frontbuffer. [109349.952] (II) intel(0): Allocated new frame buffer 2560x1024 stride 10240, untiled [109358.290] (II) intel(0): EDID vendor "CMO", prod id 5414 [109358.290] (II) intel(0): Printing DDC gathered Modelines: [109358.290] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [109358.434] (II) intel(0): EDID vendor "CMO", prod id 5414 [109358.434] (II) intel(0): Printing DDC gathered Modelines: [109358.434] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) [109372.577] (II) intel(0): EDID vendor "CMO", prod id 5414 [109372.577] (II) intel(0): Printing DDC gathered Modelines: [109372.577] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)