Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000005) is beyond end of object (20100428/exoparg2-418)
[64836.008810] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C20E] (Node f7023510), AE_AML_PACKAGE_LIMIT
[64836.008841] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C002.C0DD.C318._STM] (Node f7026378), AE_AML_PACKAGE_LIMIT
[64836.008948] ata1: ACPI set timing mode failed (status=0x300b)
[64836.149066] PM: resume of drv:usb dev:usb2 complete after 141.773 msecs
[64836.149093] PM: resume of drv:hub dev:2-0:1.0 complete after 141.792 msecs
[64836.285444] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[64836.285449] ata1.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
[64836.301388] ata1.00: configured for MWDMA2
[64839.129056] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[64839.131905] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[64839.131910] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[64839.141533] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[64839.141541] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[64839.145729] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[64839.145734] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[64839.145945] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[64839.145953] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[64839.147106] ata3.00: configured for UDMA/133
[64839.162673] ata3.00: configured for UDMA/133
[64839.162679] ata3: EH complete
[64839.182719] PM: resume of drv:sd dev:2:0:0:0 complete after 3175.378 msecs
[64839.182742] PM: resume of drv:scsi_disk dev:2:0:0:0 complete after 3031.916 msecs
[64839.182752] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 3175.381 msecs
[64839.332048] PM: resume of drv:pcmcia_socket dev:pcmcia_socket0 complete after 137.132 msecs
[64839.332184] PM: resume of devices complete after 3329.161 msecs
[64839.332471] PM: resume devices took 3.332 seconds
[64839.332513] PM: Finishing wakeup.
[64839.332515] Restarting tasks ... done.
[64839.361428] video LNXVIDEO:00: Restoring backlight state
[64839.421301] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[64839.464039] Skipping EDID probe due to cached edid
[64839.517063] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[64839.538557] ADDRCONF(NETDEV_UP): eth0: link is not ready
[64840.645284] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[64840.994918] EXT4-fs (sda3): re-mounted. Opts: commit=0
[64842.273743] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[64842.479465] EXT4-fs (sda3): re-mounted. Opts: commit=0
[64843.334139] PM: Syncing filesystems ... done.
[64843.337227] PM: Preparing system for mem sleep
[64843.620219] Freezing user space processes ... (elapsed 0.01 seconds) done.
[64843.637084] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[64843.652066] PM: Entering mem sleep
[64843.652103] Suspending console(s) (use no_console_suspend to debug)
[64843.652850] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[64843.652969] sd 2:0:0:0: [sda] Stopping disk
[64843.695559] ACPI handle has no context!
[64843.695815] e100 0000:02:08.0: PME# enabled
[64843.695825] e100 0000:02:08.0: wake-up capability enabled by ACPI
[64843.696168] ata_piix 0000:00:1f.1: PCI INT A disabled
[64843.696203] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[64843.696214] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[64843.696460] i915 0000:00:02.0: PCI INT A disabled
[64843.800130] HDA Intel 0000:00:1b.0: PCI INT A disabled
[64843.836043] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3
[64843.836050] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 139.811 msecs
[64844.073618] PM: suspend of drv:sd dev:2:0:0:0 complete after 420.773 msecs
[64844.073634] PM: suspend of drv:scsi dev:target2:0:0 complete after 420.717 msecs
[64844.073646] PM: suspend of drv:scsi dev:host2 complete after 420.643 msecs
[64844.104019] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 407.961 msecs
[64844.104033] PM: suspend of drv: dev:pci0000:00 complete after 407.779 msecs
[64844.104047] PM: suspend of devices complete after 451.515 msecs
[64844.104050] PM: suspend devices took 0.452 seconds
[64844.120268] PM: late suspend of devices complete after 16.214 msecs
[64844.120526] ACPI: Preparing to enter system sleep state S3
[64844.120686] PM: Saving platform NVS memory
[64844.124752] Disabling non-boot CPUs ...
[64844.232035] CPU 1 is now offline
[64844.232039] SMP alternatives: switching to UP code
[64844.237380] Extended CMOS year: 2000
[64844.237380] Back to C!
[64844.237380] PM: Restoring platform NVS memory
[64844.237380] CPU0: Thermal monitoring handled by SMI
[64844.237380] Extended CMOS year: 2000
[64844.237380] Enabling non-boot CPUs ...
[64844.237380] SMP alternatives: switching to SMP code
[64844.242633] Booting Node 0 Processor 1 APIC 0x1
[64844.236936] Initializing CPU#1
[64844.236936] CPU1: Thermal monitoring handled by SMI
[64844.356534] CPU1 is up
[64844.357060] ACPI: Waking up from system sleep state S3
[64844.493363] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[64844.493395] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xf0500000)
[64844.493400] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[64844.493426] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[64844.493448] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[64844.493455] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[64844.493490] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x4010a)
[64844.493503] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x3fb13fa1)
[64844.493509] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0x3f903f80)
[64844.493515] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040)
[64844.493526] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[64844.493534] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[64844.493586] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x4020a)
[64844.493599] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x3fd13fc1)
[64844.493605] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf000f000)
[64844.493611] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050)
[64844.493622] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[64844.493630] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[64844.493670] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
[64844.493685] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x3021)
[64844.493699] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[64844.493724] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x105)
[64844.493744] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xf0584000)
[64844.493754] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[64844.493789] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x43f14001)
[64844.493795] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xf030f010)
[64844.493801] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x228000f0, writing 0x22802020)
[64844.493814] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)
[64844.493882] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[64844.493897] ata_piix 0000:00:1f.1: restoring config space at offset 0x8 (was 0xc01, writing 0x3041)
[64844.493912] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[64844.493942] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0xfec01000, writing 0xf0585000)
[64844.493949] ahci 0000:00:1f.2: restoring config space at offset 0x8 (was 0x1301, writing 0x3071)
[64844.493963] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[64844.494060] iwl3945 0000:10:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[64844.494128] iwl3945 0000:10:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0000000)
[64844.494141] iwl3945 0000:10:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[64844.494161] iwl3945 0000:10:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406)
[64844.494287] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010b)
[64844.494294] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xe (was 0x0, writing 0x28fc)
[64844.494301] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xd (was 0x0, writing 0x2800)
[64844.494307] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xc (was 0x0, writing 0x24fc)
[64844.494314] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xb (was 0x0, writing 0x2400)
[64844.494321] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xa (was 0x0, writing 0x47fff000)
[64844.494328] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x9 (was 0x0, writing 0x44000000)
[64844.494335] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x8 (was 0x0, writing 0x43fff000)
[64844.494342] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x7 (was 0x0, writing 0x40000000)
[64844.494349] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302)
[64844.494357] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0100000)
[64844.494364] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a810)
[64844.494373] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007)
[64844.494421] e100 0000:02:08.0: restoring config space at offset 0xf (was 0x38080100, writing 0x38080105)
[64844.494440] e100 0000:02:08.0: restoring config space at offset 0x5 (was 0x1, writing 0x2001)
[64844.494446] e100 0000:02:08.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0101000)
[64844.494452] e100 0000:02:08.0: restoring config space at offset 0x3 (was 0x0, writing 0x4010)
[64844.494460] e100 0000:02:08.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900007)
[64844.494985] PM: early resume of devices complete after 1.760 msecs
[64844.496315] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[64844.497001] i915 0000:00:02.0: setting latency timer to 64
[64844.498444] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[64844.498481] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[64844.498515] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[64844.498548] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[64844.498560] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[64844.498569] HDA Intel 0000:00:1b.0: setting latency timer to 64
[64844.498623] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[64844.498673] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[64844.498680] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[64844.498708] usb usb2: root hub lost power or was reset
[64844.498734] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[64844.498742] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[64844.498789] pci 0000:00:1e.0: setting latency timer to 64
[64844.498806] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[64844.498812] ata_piix 0000:00:1f.1: setting latency timer to 64
[64844.498845] ahci 0000:00:1f.2: setting latency timer to 64
[64844.498914] e100 0000:02:08.0: wake-up capability disabled by ACPI
[64844.498921] e100 0000:02:08.0: PME# disabled
[64844.498973] sd 2:0:0:0: [sda] Starting disk
[64844.499191] ata2: port disabled. ignoring.
[64844.500524] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000005) is beyond end of object (20100428/exoparg2-418)
[64844.500534] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C20E] (Node f7023510), AE_AML_PACKAGE_LIMIT
[64844.500565] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C002.C0DD.C318._STM] (Node f7026378), AE_AML_PACKAGE_LIMIT
[64844.500669] ata1: ACPI set timing mode failed (status=0x300b)
[64844.641068] PM: resume of drv:usb dev:usb2 complete after 142.128 msecs
[64844.641096] PM: resume of drv:hub dev:2-0:1.0 complete after 142.150 msecs
[64844.777457] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[64844.777462] ata1.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
[64844.793408] ata1.00: configured for MWDMA2
[64846.333061] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[64846.335890] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[64846.335895] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[64846.342607] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[64846.342615] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[64846.346800] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[64846.346805] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[64846.347011] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[64846.347019] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[64846.348170] ata3.00: configured for UDMA/133
[64846.366648] ata3.00: configured for UDMA/133
[64846.366654] ata3: EH complete
[64846.383791] PM: resume of drv:sd dev:2:0:0:0 complete after 1884.814 msecs
[64846.383814] PM: resume of drv:scsi_disk dev:2:0:0:0 complete after 1740.985 msecs
[64846.383824] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 1884.842 msecs
[64846.532047] PM: resume of drv:pcmcia_socket dev:pcmcia_socket0 complete after 136.091 msecs
[64846.532183] PM: resume of devices complete after 2037.152 msecs
[64846.532468] PM: resume devices took 2.040 seconds
[64846.532510] PM: Finishing wakeup.
[64846.532512] Restarting tasks ... done.
[64846.549192] video LNXVIDEO:00: Restoring backlight state
[64846.554218] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[64846.621091] Skipping EDID probe due to cached edid
[64846.681120] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[64846.702279] ADDRCONF(NETDEV_UP): eth0: link is not ready
[64847.700421] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[64847.882345] EXT4-fs (sda3): re-mounted. Opts: commit=0
[64848.355994] wlan0: authenticate with 00:22:75:59:09:f2 (try 1)
[64848.360718] wlan0: authenticated
[64848.360782] wlan0: associate with 00:22:75:59:09:f2 (try 1)
[64848.374118] wlan0: RX AssocResp from 00:22:75:59:09:f2 (capab=0x431 status=0 aid=1)
[64848.374126] wlan0: associated
[64848.375970] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[64859.008035] wlan0: no IPv6 routers present
[64879.772074] Skipping EDID probe due to cached edid
[64879.804071] Skipping EDID probe due to cached edid
[71001.776093] Skipping EDID probe due to cached edid
[72803.454827] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[72803.463350] EXT4-fs (sda3): re-mounted. Opts: commit=0
[72804.124115] wlan0: deauthenticating from 00:22:75:59:09:f2 by local choice (reason=3)
[72804.171199] cfg80211: All devices are disconnected, going to restore regulatory settings
[72804.171210] cfg80211: Restoring regulatory settings
[72804.171216] cfg80211: Calling CRDA to update world regulatory domain
[72804.184396] cfg80211: World regulatory domain updated:
[72804.184404]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72804.184411]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[72804.184418]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[72804.184424]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[72804.184430]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[72804.184437]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[72804.584697] PM: Syncing filesystems ... done.
[72804.587772] PM: Preparing system for mem sleep
[72804.840234] Freezing user space processes ... (elapsed 0.01 seconds) done.
[72804.856079] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[72804.872055] PM: Entering mem sleep
[72804.872086] Suspending console(s) (use no_console_suspend to debug)
[72804.872844] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[72804.872954] sd 2:0:0:0: [sda] Stopping disk
[72804.915381] ACPI handle has no context!
[72804.915634] e100 0000:02:08.0: PME# enabled
[72804.915659] e100 0000:02:08.0: wake-up capability enabled by ACPI
[72804.915815] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[72804.915848] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[72804.916141] i915 0000:00:02.0: PCI INT A disabled
[72804.916289] ata_piix 0000:00:1f.1: PCI INT A disabled
[72805.016146] HDA Intel 0000:00:1b.0: PCI INT A disabled
[72805.052043] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3
[72805.052050] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 136.129 msecs
[72805.298184] PM: suspend of drv:sd dev:2:0:0:0 complete after 425.346 msecs
[72805.298199] PM: suspend of drv:scsi dev:target2:0:0 complete after 425.287 msecs
[72805.298212] PM: suspend of drv:scsi dev:host2 complete after 425.203 msecs
[72805.329017] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 413.320 msecs
[72805.329029] PM: suspend of drv: dev:pci0000:00 complete after 412.868 msecs
[72805.329042] PM: suspend of devices complete after 456.517 msecs
[72805.329045] PM: suspend devices took 0.456 seconds
[72805.345267] PM: late suspend of devices complete after 16.217 msecs
[72805.345587] ACPI: Preparing to enter system sleep state S3
[72805.345893] PM: Saving platform NVS memory
[72805.350145] Disabling non-boot CPUs ...
[72805.456035] CPU 1 is now offline
[72805.456040] SMP alternatives: switching to UP code
[72805.461478] Extended CMOS year: 2000
[72805.461478] Back to C!
[72805.461478] PM: Restoring platform NVS memory
[72805.461478] CPU0: Thermal monitoring handled by SMI
[72805.461478] Extended CMOS year: 2000
[72805.461478] Enabling non-boot CPUs ...
[72805.461478] SMP alternatives: switching to SMP code
[72805.466653] Booting Node 0 Processor 1 APIC 0x1
[72805.461007] Initializing CPU#1
[72805.461007] CPU1: Thermal monitoring handled by SMI
[72805.580539] CPU1 is up
[72805.583311] ACPI: Waking up from system sleep state S3
[72805.717362] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[72805.717394] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xf0500000)
[72805.717399] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[72805.717425] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[72805.717447] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[72805.717455] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[72805.717489] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x4010a)
[72805.717503] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x3fb13fa1)
[72805.717509] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0x3f903f80)
[72805.717515] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x20004040)
[72805.717525] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[72805.717533] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[72805.717585] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x4020a)
[72805.717598] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x3fd13fc1)
[72805.717604] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf000f000)
[72805.717610] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x20005050)
[72805.717621] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[72805.717629] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[72805.717669] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
[72805.717684] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x3021)
[72805.717698] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[72805.717722] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x105)
[72805.717743] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xf0584000)
[72805.717752] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[72805.717787] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x43f14001)
[72805.717793] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xf030f010)
[72805.717799] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x228000f0, writing 0x22802020)
[72805.717812] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)
[72805.717879] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[72805.717893] ata_piix 0000:00:1f.1: restoring config space at offset 0x8 (was 0xc01, writing 0x3041)
[72805.717908] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[72805.717939] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0xfec01000, writing 0xf0585000)
[72805.717945] ahci 0000:00:1f.2: restoring config space at offset 0x8 (was 0x1301, writing 0x3071)
[72805.717960] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[72805.718056] iwl3945 0000:10:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[72805.718123] iwl3945 0000:10:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0000000)
[72805.718137] iwl3945 0000:10:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[72805.718156] iwl3945 0000:10:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406)
[72805.718281] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010b)
[72805.718288] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xe (was 0x0, writing 0x28fc)
[72805.718295] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xd (was 0x0, writing 0x2800)
[72805.718302] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xc (was 0x0, writing 0x24fc)
[72805.718309] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xb (was 0x0, writing 0x2400)
[72805.718315] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xa (was 0x0, writing 0x47fff000)
[72805.718322] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x9 (was 0x0, writing 0x44000000)
[72805.718329] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x8 (was 0x0, writing 0x43fff000)
[72805.718336] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x7 (was 0x0, writing 0x40000000)
[72805.718343] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302)
[72805.718351] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0100000)
[72805.718358] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a810)
[72805.718367] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007)
[72805.718415] e100 0000:02:08.0: restoring config space at offset 0xf (was 0x38080100, writing 0x38080105)
[72805.718434] e100 0000:02:08.0: restoring config space at offset 0x5 (was 0x1, writing 0x2001)
[72805.718440] e100 0000:02:08.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0101000)
[72805.718446] e100 0000:02:08.0: restoring config space at offset 0x3 (was 0x0, writing 0x4010)
[72805.718453] e100 0000:02:08.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900007)
[72805.718978] PM: early resume of devices complete after 1.753 msecs
[72805.721843] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[72805.721849] i915 0000:00:02.0: setting latency timer to 64
[72805.722721] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[72805.722883] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[72805.722893] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[72805.722932] usb usb2: root hub lost power or was reset
[72805.722969] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[72805.722977] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[72805.723061] pci 0000:00:1e.0: setting latency timer to 64
[72805.723073] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[72805.723138] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[72805.723144] ata_piix 0000:00:1f.1: setting latency timer to 64
[72805.723152] ahci 0000:00:1f.2: setting latency timer to 64
[72805.723200] ata2: port disabled. ignoring.
[72805.723295] sd 2:0:0:0: [sda] Starting disk
[72805.723453] e100 0000:02:08.0: wake-up capability disabled by ACPI
[72805.723460] e100 0000:02:08.0: PME# disabled
[72805.725022] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000005) is beyond end of object (20100428/exoparg2-418)
[72805.725032] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C20E] (Node f7023510), AE_AML_PACKAGE_LIMIT
[72805.725064] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C002.C0DD.C318._STM] (Node f7026378), AE_AML_PACKAGE_LIMIT
[72805.725151] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[72805.725167] ata1: ACPI set timing mode failed (status=0x300b)
[72805.725884] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[72805.725894] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[72805.725903] HDA Intel 0000:00:1b.0: setting latency timer to 64
[72805.725968] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[72805.864062] PM: resume of drv:usb dev:usb2 complete after 141.249 msecs
[72805.864089] PM: resume of drv:hub dev:2-0:1.0 complete after 141.275 msecs
[72806.001452] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[72806.001456] ata1.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
[72806.017415] ata1.00: configured for MWDMA2
[72808.845056] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[72808.847894] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[72808.847899] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[72808.854632] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[72808.854640] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[72808.858826] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[72808.858831] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[72808.859042] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[72808.859050] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[72808.860205] ata3.00: configured for UDMA/133
[72808.878671] ata3.00: configured for UDMA/133
[72808.878677] ata3: EH complete
[72808.895818] PM: resume of drv:sd dev:2:0:0:0 complete after 3172.588 msecs
[72808.895841] PM: resume of drv:scsi_disk dev:2:0:0:0 complete after 3030.061 msecs
[72808.895850] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 3172.604 msecs
[72809.044046] PM: resume of drv:pcmcia_socket dev:pcmcia_socket0 complete after 138.230 msecs
[72809.044180] PM: resume of devices complete after 3325.160 msecs
[72809.044461] PM: resume devices took 3.328 seconds
[72809.044502] PM: Finishing wakeup.
[72809.044504] Restarting tasks ... done.
[72809.064208] video LNXVIDEO:00: Restoring backlight state
[72809.069179] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[72809.124094] Skipping EDID probe due to cached edid
[72809.213087] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[72809.238068] ADDRCONF(NETDEV_UP): eth0: link is not ready
[72809.451269] cfg80211: Found new beacon on frequency: 5180 MHz (Ch 36) on phy0
[72810.021176] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[72810.202693] EXT4-fs (sda3): re-mounted. Opts: commit=0
[72810.360871] cfg80211: Found new beacon on frequency: 5765 MHz (Ch 153) on phy0
[72810.547364] cfg80211: Found new beacon on frequency: 5805 MHz (Ch 161) on phy0
[72811.481380] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[72811.627042] EXT4-fs (sda3): re-mounted. Opts: commit=0
[72811.854313] cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0
[72812.451054] PM: Syncing filesystems ... done.
[72812.454266] PM: Preparing system for mem sleep
[72812.669233] Freezing user space processes ... (elapsed 0.01 seconds) done.
[72812.684078] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[72812.700058] PM: Entering mem sleep
[72812.700091] Suspending console(s) (use no_console_suspend to debug)
[72812.700841] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[72812.700918] sd 2:0:0:0: [sda] Stopping disk
[72812.743454] ACPI handle has no context!
[72812.743708] e100 0000:02:08.0: PME# enabled
[72812.743719] e100 0000:02:08.0: wake-up capability enabled by ACPI
[72812.744006] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[72812.744019] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[72812.744095] ata_piix 0000:00:1f.1: PCI INT A disabled
[72812.744487] i915 0000:00:02.0: PCI INT A disabled
[72812.848144] HDA Intel 0000:00:1b.0: PCI INT A disabled
[72812.885043] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3
[72812.885050] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 140.942 msecs
[72813.111025] PM: suspend of drv:sd dev:2:0:0:0 complete after 410.189 msecs
[72813.111042] PM: suspend of drv:scsi dev:target2:0:0 complete after 410.112 msecs
[72813.111054] PM: suspend of drv:scsi dev:host2 complete after 410.068 msecs
[72813.140020] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 396.059 msecs
[72813.140033] PM: suspend of drv: dev:pci0000:00 complete after 395.487 msecs
[72813.140047] PM: suspend of devices complete after 439.519 msecs
[72813.140050] PM: suspend devices took 0.440 seconds
[72813.157265] PM: late suspend of devices complete after 17.210 msecs
[72813.157521] ACPI: Preparing to enter system sleep state S3
[72813.157680] PM: Saving platform NVS memory
[72813.159733] Disabling non-boot CPUs ...
[72813.160998] CPU 1 is now offline
[72813.161000] SMP alternatives: switching to UP code
[72813.166367] Extended CMOS year: 2000
[72813.166367] Back to C!
[72813.166367] PM: Restoring platform NVS memory
[72813.166367] CPU0: Thermal monitoring handled by SMI
[72813.166367] Extended CMOS year: 2000
[72813.166367] Enabling non-boot CPUs ...
[72813.166367] SMP alternatives: switching to SMP code
[72813.171535] Booting Node 0 Processor 1 APIC 0x1
[72813.165922] Initializing CPU#1
[72813.165922] CPU1: Thermal monitoring handled by SMI
[72813.276539] CPU1 is up
[72813.277035] ACPI: Waking up from system sleep state S3
[72813.413364] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[72813.413396] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xf0500000)
[72813.413401] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[72813.413427] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[72813.413449] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[72813.413457] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[72813.413492] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x4010a)
[72813.413505] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x3fb13fa1)
[72813.413511] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0x3f903f80)
[72813.413517] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040)
[72813.413528] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[72813.413536] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[72813.413587] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x4020a)
[72813.413601] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x3fd13fc1)
[72813.413607] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf000f000)
[72813.413613] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050)
[72813.413624] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[72813.413631] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[72813.413671] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
[72813.413686] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x3021)
[72813.413701] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[72813.413724] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x105)
[72813.413745] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xf0584000)
[72813.413754] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[72813.413789] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x43f14001)
[72813.413795] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xf030f010)
[72813.413801] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x228000f0, writing 0x22802020)
[72813.413815] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)
[72813.413883] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[72813.413898] ata_piix 0000:00:1f.1: restoring config space at offset 0x8 (was 0xc01, writing 0x3041)
[72813.413912] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[72813.413943] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0xfec01000, writing 0xf0585000)
[72813.413949] ahci 0000:00:1f.2: restoring config space at offset 0x8 (was 0x1301, writing 0x3071)
[72813.413964] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[72813.414060] iwl3945 0000:10:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[72813.414128] iwl3945 0000:10:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0000000)
[72813.414142] iwl3945 0000:10:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[72813.414162] iwl3945 0000:10:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406)
[72813.414288] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010b)
[72813.414295] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xe (was 0x0, writing 0x28fc)
[72813.414302] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xd (was 0x0, writing 0x2800)
[72813.414309] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xc (was 0x0, writing 0x24fc)
[72813.414315] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xb (was 0x0, writing 0x2400)
[72813.414322] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xa (was 0x0, writing 0x47fff000)
[72813.414329] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x9 (was 0x0, writing 0x44000000)
[72813.414336] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x8 (was 0x0, writing 0x43fff000)
[72813.414343] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x7 (was 0x0, writing 0x40000000)
[72813.414350] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302)
[72813.414359] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0100000)
[72813.414366] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a810)
[72813.414375] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007)
[72813.414422] e100 0000:02:08.0: restoring config space at offset 0xf (was 0x38080100, writing 0x38080105)
[72813.414442] e100 0000:02:08.0: restoring config space at offset 0x5 (was 0x1, writing 0x2001)
[72813.414448] e100 0000:02:08.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0101000)
[72813.414454] e100 0000:02:08.0: restoring config space at offset 0x3 (was 0x0, writing 0x4010)
[72813.414461] e100 0000:02:08.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900007)
[72813.414986] PM: early resume of devices complete after 1.760 msecs
[72813.415819] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[72813.417462] i915 0000:00:02.0: setting latency timer to 64
[72813.418636] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[72813.418785] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[72813.418792] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[72813.418797] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[72813.418801] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[72813.418828] pci 0000:00:1e.0: setting latency timer to 64
[72813.418831] usb usb2: root hub lost power or was reset
[72813.418853] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[72813.418929] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[72813.418940] ata_piix 0000:00:1f.1: setting latency timer to 64
[72813.418993] ata2: port disabled. ignoring.
[72813.419035] ahci 0000:00:1f.2: setting latency timer to 64
[72813.419195] e100 0000:02:08.0: wake-up capability disabled by ACPI
[72813.419201] e100 0000:02:08.0: PME# disabled
[72813.420283] sd 2:0:0:0: [sda] Starting disk
[72813.420667] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000005) is beyond end of object (20100428/exoparg2-418)
[72813.420677] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C20E] (Node f7023510), AE_AML_PACKAGE_LIMIT
[72813.420708] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C002.C0DD.C318._STM] (Node f7026378), AE_AML_PACKAGE_LIMIT
[72813.420844] ata1: ACPI set timing mode failed (status=0x300b)
[72813.420853] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[72813.421501] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[72813.421511] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[72813.421519] HDA Intel 0000:00:1b.0: setting latency timer to 64
[72813.421567] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[72813.561064] PM: resume of drv:usb dev:usb2 complete after 142.201 msecs
[72813.561091] PM: resume of drv:hub dev:2-0:1.0 complete after 142.141 msecs
[72813.753451] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[72813.753456] ata1.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
[72813.769393] ata1.00: configured for MWDMA2
[72816.541056] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[72816.543892] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[72816.543897] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[72816.553650] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[72816.553658] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[72816.557819] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[72816.557824] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[72816.558046] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[72816.558054] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[72816.559209] ata3.00: configured for UDMA/133
[72816.574680] ata3.00: configured for UDMA/133
[72816.574686] ata3: EH complete
[72816.594837] PM: resume of drv:sd dev:2:0:0:0 complete after 3175.734 msecs
[72816.594860] PM: resume of drv:scsi_disk dev:2:0:0:0 complete after 3032.035 msecs
[72816.594870] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 3175.760 msecs
[72816.744046] PM: resume of drv:pcmcia_socket dev:pcmcia_socket0 complete after 139.126 msecs
[72816.744184] PM: resume of devices complete after 3329.156 msecs
[72816.744463] PM: resume devices took 3.332 seconds
[72816.744504] PM: Finishing wakeup.
[72816.744506] Restarting tasks ... done.
[72816.766655] video LNXVIDEO:00: Restoring backlight state
[72816.783836] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[72816.840063] Skipping EDID probe due to cached edid
[72816.906059] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[72816.927090] ADDRCONF(NETDEV_UP): eth0: link is not ready
[72817.680734] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[72817.837253] EXT4-fs (sda3): re-mounted. Opts: commit=0
[72820.031737] iwl3945 0000:10:00.0: Failed to get channel info for channel 2 [1]
[72820.033696] wlan0: authenticate with ec:44:76:80:65:0d (try 1)
[72820.034629] wlan0: authenticated
[72820.034683] wlan0: associate with ec:44:76:80:65:0d (try 1)
[72820.036452] wlan0: RX AssocResp from ec:44:76:80:65:0d (capab=0x11 status=0 aid=2)
[72820.036458] wlan0: associated
[72820.038573] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[72820.038719] cfg80211: Calling CRDA for country: AU
[72820.046826] cfg80211: Received country IE:
[72820.046833] cfg80211: Regulatory domain: AU
[72820.046837]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72820.046844]     (5170000 KHz - 5330000 KHz @ 40000 KHz), (10000 mBi, 1700 mBm)
[72820.046850]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (10000 mBi, 3000 mBm)
[72820.046855] cfg80211: CRDA thinks this should applied:
[72820.046859] cfg80211: Regulatory domain: AU
[72820.046863]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72820.046869]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[72820.046875]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
[72820.046882]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
[72820.046888]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[72820.046892] cfg80211: We intersect both of these and get:
[72820.046897] cfg80211: Regulatory domain: 98
[72820.046900]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72820.046907]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[72820.046913]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[72820.046919]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[72820.046928] cfg80211: Leaving channel 2412 MHz intact on phy0 - no rule found in band on Country IE
[72820.046934] cfg80211: Leaving channel 2417 MHz intact on phy0 - no rule found in band on Country IE
[72820.046939] cfg80211: Leaving channel 2422 MHz intact on phy0 - no rule found in band on Country IE
[72820.046945] cfg80211: Leaving channel 2427 MHz intact on phy0 - no rule found in band on Country IE
[72820.046951] cfg80211: Leaving channel 2432 MHz intact on phy0 - no rule found in band on Country IE
[72820.046957] cfg80211: Leaving channel 2437 MHz intact on phy0 - no rule found in band on Country IE
[72820.046963] cfg80211: Leaving channel 2442 MHz intact on phy0 - no rule found in band on Country IE
[72820.046968] cfg80211: Leaving channel 2447 MHz intact on phy0 - no rule found in band on Country IE
[72820.046974] cfg80211: Leaving channel 2452 MHz intact on phy0 - no rule found in band on Country IE
[72820.046980] cfg80211: Leaving channel 2457 MHz intact on phy0 - no rule found in band on Country IE
[72820.046986] cfg80211: Leaving channel 2462 MHz intact on phy0 - no rule found in band on Country IE
[72820.046995] cfg80211: Current regulatory domain updated by AP to: AU
[72820.046999]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72820.047005]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[72820.047012]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[72820.047018]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[72822.113326] wlan0: deauthenticating from ec:44:76:80:65:0d by local choice (reason=3)
[72822.124504] cfg80211: All devices are disconnected, going to restore regulatory settings
[72822.124514] cfg80211: Restoring regulatory settings
[72822.124522] cfg80211: Calling CRDA to update world regulatory domain
[72822.132988] cfg80211: World regulatory domain updated:
[72822.132995]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72822.133002]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[72822.133014]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[72822.133020]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[72822.133026]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[72822.133032]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[72823.514705] wlan0: authenticate with ec:44:76:80:65:0d (try 1)
[72823.518434] wlan0: authenticated
[72823.518500] wlan0: associate with ec:44:76:80:65:0d (try 1)
[72823.520121] wlan0: RX AssocResp from ec:44:76:80:65:0d (capab=0x11 status=0 aid=2)
[72823.520128] wlan0: associated
[72823.522544] cfg80211: Calling CRDA for country: AU
[72823.529777] cfg80211: Received country IE:
[72823.529784] cfg80211: Regulatory domain: AU
[72823.529788]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72823.529795]     (5170000 KHz - 5330000 KHz @ 40000 KHz), (10000 mBi, 1700 mBm)
[72823.529802]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (10000 mBi, 3000 mBm)
[72823.529806] cfg80211: CRDA thinks this should applied:
[72823.529811] cfg80211: Regulatory domain: AU
[72823.529814]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72823.529821]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[72823.529827]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
[72823.529833]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
[72823.529840]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[72823.529844] cfg80211: We intersect both of these and get:
[72823.529848] cfg80211: Regulatory domain: 98
[72823.529852]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72823.529859]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[72823.529865]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[72823.529871]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[72823.529879] cfg80211: Leaving channel 2412 MHz intact on phy0 - no rule found in band on Country IE
[72823.529885] cfg80211: Leaving channel 2417 MHz intact on phy0 - no rule found in band on Country IE
[72823.529891] cfg80211: Leaving channel 2422 MHz intact on phy0 - no rule found in band on Country IE
[72823.529897] cfg80211: Leaving channel 2427 MHz intact on phy0 - no rule found in band on Country IE
[72823.529903] cfg80211: Leaving channel 2432 MHz intact on phy0 - no rule found in band on Country IE
[72823.529909] cfg80211: Leaving channel 2437 MHz intact on phy0 - no rule found in band on Country IE
[72823.529914] cfg80211: Leaving channel 2442 MHz intact on phy0 - no rule found in band on Country IE
[72823.529920] cfg80211: Leaving channel 2447 MHz intact on phy0 - no rule found in band on Country IE
[72823.529926] cfg80211: Leaving channel 2452 MHz intact on phy0 - no rule found in band on Country IE
[72823.529932] cfg80211: Leaving channel 2457 MHz intact on phy0 - no rule found in band on Country IE
[72823.529938] cfg80211: Leaving channel 2462 MHz intact on phy0 - no rule found in band on Country IE
[72823.529947] cfg80211: Current regulatory domain updated by AP to: AU
[72823.529951]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72823.529957]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[72823.529964]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[72823.529970]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[72830.640040] wlan0: no IPv6 routers present
[72856.091354] wlan0: deauthenticating from ec:44:76:80:65:0d by local choice (reason=3)
[72856.100514] cfg80211: All devices are disconnected, going to restore regulatory settings
[72856.100524] cfg80211: Restoring regulatory settings
[72856.100530] cfg80211: Calling CRDA to update world regulatory domain
[72856.108626] cfg80211: World regulatory domain updated:
[72856.108633]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72856.108640]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[72856.108647]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[72856.108653]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[72856.108659]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[72856.108666]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[72857.567944] wlan0: direct probe to ec:44:76:80:62:be (try 1)
[72857.765067] wlan0: direct probe to ec:44:76:80:62:be (try 2)
[72857.964066] wlan0: direct probe to ec:44:76:80:62:be (try 3)
[72858.164076] wlan0: direct probe to ec:44:76:80:62:be timed out
[72869.031913] wlan0: direct probe to c4:7d:4f:4c:34:c2 (try 1)
[72869.034866] wlan0: direct probe responded
[72869.041044] wlan0: authenticate with c4:7d:4f:4c:34:c2 (try 1)
[72869.043959] wlan0: authenticated
[72869.044011] wlan0: associate with c4:7d:4f:4c:34:c2 (try 1)
[72869.047697] wlan0: RX AssocResp from c4:7d:4f:4c:34:c2 (capab=0x431 status=0 aid=4)
[72869.047704] wlan0: associated
[72869.050038] cfg80211: Calling CRDA for country: AU
[72869.056387] cfg80211: Received country IE:
[72869.056392] cfg80211: Regulatory domain: AU
[72869.056395]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72869.056398]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (10000 mBi, 3000 mBm)
[72869.056401] cfg80211: CRDA thinks this should applied:
[72869.056403] cfg80211: Regulatory domain: AU
[72869.056405]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72869.056409]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[72869.056412]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
[72869.056416]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
[72869.056419]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[72869.056422] cfg80211: We intersect both of these and get:
[72869.056424] cfg80211: Regulatory domain: 98
[72869.056426]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72869.056429]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[72869.056435] cfg80211: Leaving channel 5180 MHz intact on phy0 - no rule found in band on Country IE
[72869.056439] cfg80211: Leaving channel 5200 MHz intact on phy0 - no rule found in band on Country IE
[72869.056442] cfg80211: Leaving channel 5220 MHz intact on phy0 - no rule found in band on Country IE
[72869.056445] cfg80211: Leaving channel 5240 MHz intact on phy0 - no rule found in band on Country IE
[72869.056448] cfg80211: Leaving channel 5260 MHz intact on phy0 - no rule found in band on Country IE
[72869.056451] cfg80211: Leaving channel 5280 MHz intact on phy0 - no rule found in band on Country IE
[72869.056454] cfg80211: Leaving channel 5300 MHz intact on phy0 - no rule found in band on Country IE
[72869.056457] cfg80211: Leaving channel 5320 MHz intact on phy0 - no rule found in band on Country IE
[72869.056461] cfg80211: Leaving channel 5745 MHz intact on phy0 - no rule found in band on Country IE
[72869.056464] cfg80211: Leaving channel 5765 MHz intact on phy0 - no rule found in band on Country IE
[72869.056467] cfg80211: Leaving channel 5785 MHz intact on phy0 - no rule found in band on Country IE
[72869.056474] cfg80211: Leaving channel 5805 MHz intact on phy0 - no rule found in band on Country IE
[72869.056474] cfg80211: Leaving channel 5825 MHz intact on phy0 - no rule found in band on Country IE
[72869.056478] cfg80211: Current regulatory domain updated by AP to: AU
[72869.056480]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72869.056483]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[72871.076158] wlan0: deauthenticating from c4:7d:4f:4c:34:c2 by local choice (reason=3)
[72871.092507] cfg80211: All devices are disconnected, going to restore regulatory settings
[72871.092516] cfg80211: Restoring regulatory settings
[72871.092522] cfg80211: Calling CRDA to update world regulatory domain
[72871.100604] cfg80211: World regulatory domain updated:
[72871.100610]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72871.100617]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[72871.100624]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[72871.100630]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[72871.100637]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[72871.100643]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[72872.550272] wlan0: authenticate with c4:7d:4f:4c:34:c2 (try 1)
[72872.551718] wlan0: authenticated
[72872.551765] wlan0: associate with c4:7d:4f:4c:34:c2 (try 1)
[72872.554391] wlan0: RX AssocResp from c4:7d:4f:4c:34:c2 (capab=0x431 status=0 aid=4)
[72872.554399] wlan0: associated
[72872.556403] cfg80211: Calling CRDA for country: AU
[72872.562206] cfg80211: Received country IE:
[72872.562210] cfg80211: Regulatory domain: AU
[72872.562213]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72872.562216]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (10000 mBi, 3000 mBm)
[72872.562219] cfg80211: CRDA thinks this should applied:
[72872.562221] cfg80211: Regulatory domain: AU
[72872.562223]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72872.562227]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[72872.562230]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
[72872.562234]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
[72872.562237]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[72872.562240] cfg80211: We intersect both of these and get:
[72872.562242] cfg80211: Regulatory domain: 98
[72872.562244]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72872.562247]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[72872.562253] cfg80211: Leaving channel 5180 MHz intact on phy0 - no rule found in band on Country IE
[72872.562257] cfg80211: Leaving channel 5200 MHz intact on phy0 - no rule found in band on Country IE
[72872.562260] cfg80211: Leaving channel 5220 MHz intact on phy0 - no rule found in band on Country IE
[72872.562263] cfg80211: Leaving channel 5240 MHz intact on phy0 - no rule found in band on Country IE
[72872.562266] cfg80211: Leaving channel 5260 MHz intact on phy0 - no rule found in band on Country IE
[72872.562269] cfg80211: Leaving channel 5280 MHz intact on phy0 - no rule found in band on Country IE
[72872.562272] cfg80211: Leaving channel 5300 MHz intact on phy0 - no rule found in band on Country IE
[72872.562276] cfg80211: Leaving channel 5320 MHz intact on phy0 - no rule found in band on Country IE
[72872.562279] cfg80211: Leaving channel 5745 MHz intact on phy0 - no rule found in band on Country IE
[72872.562282] cfg80211: Leaving channel 5765 MHz intact on phy0 - no rule found in band on Country IE
[72872.562285] cfg80211: Leaving channel 5785 MHz intact on phy0 - no rule found in band on Country IE
[72872.562288] cfg80211: Leaving channel 5805 MHz intact on phy0 - no rule found in band on Country IE
[72872.562291] cfg80211: Leaving channel 5825 MHz intact on phy0 - no rule found in band on Country IE
[72872.562295] cfg80211: Current regulatory domain updated by AP to: AU
[72872.562298]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72872.562301]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[72874.576163] wlan0: deauthenticating from c4:7d:4f:4c:34:c2 by local choice (reason=3)
[72874.588914] cfg80211: All devices are disconnected, going to restore regulatory settings
[72874.588923] cfg80211: Restoring regulatory settings
[72874.588929] cfg80211: Calling CRDA to update world regulatory domain
[72874.596796] cfg80211: World regulatory domain updated:
[72874.596803]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72874.596810]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[72874.596817]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[72874.596823]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[72874.596830]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[72874.596836]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[72875.994920] wlan0: authenticate with ec:44:76:80:62:c1 (try 1)
[72875.996369] wlan0: authenticated
[72875.996432] wlan0: associate with ec:44:76:80:62:c1 (try 1)
[72875.999277] wlan0: RX AssocResp from ec:44:76:80:62:c1 (capab=0x431 status=0 aid=1)
[72875.999283] wlan0: associated
[72876.001276] cfg80211: Calling CRDA for country: AU
[72876.008444] cfg80211: Received country IE:
[72876.008451] cfg80211: Regulatory domain: AU
[72876.008455]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72876.008462]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (10000 mBi, 3000 mBm)
[72876.008467] cfg80211: CRDA thinks this should applied:
[72876.008471] cfg80211: Regulatory domain: AU
[72876.008474]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72876.008481]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[72876.008487]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
[72876.008493]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
[72876.008500]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[72876.008504] cfg80211: We intersect both of these and get:
[72876.008508] cfg80211: Regulatory domain: 98
[72876.008512]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72876.008518]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[72876.008528] cfg80211: Leaving channel 5180 MHz intact on phy0 - no rule found in band on Country IE
[72876.008534] cfg80211: Leaving channel 5200 MHz intact on phy0 - no rule found in band on Country IE
[72876.008539] cfg80211: Leaving channel 5220 MHz intact on phy0 - no rule found in band on Country IE
[72876.008545] cfg80211: Leaving channel 5240 MHz intact on phy0 - no rule found in band on Country IE
[72876.008551] cfg80211: Leaving channel 5260 MHz intact on phy0 - no rule found in band on Country IE
[72876.008557] cfg80211: Leaving channel 5280 MHz intact on phy0 - no rule found in band on Country IE
[72876.008562] cfg80211: Leaving channel 5300 MHz intact on phy0 - no rule found in band on Country IE
[72876.008568] cfg80211: Leaving channel 5320 MHz intact on phy0 - no rule found in band on Country IE
[72876.008574] cfg80211: Leaving channel 5745 MHz intact on phy0 - no rule found in band on Country IE
[72876.008579] cfg80211: Leaving channel 5765 MHz intact on phy0 - no rule found in band on Country IE
[72876.008585] cfg80211: Leaving channel 5785 MHz intact on phy0 - no rule found in band on Country IE
[72876.008591] cfg80211: Leaving channel 5805 MHz intact on phy0 - no rule found in band on Country IE
[72876.008597] cfg80211: Leaving channel 5825 MHz intact on phy0 - no rule found in band on Country IE
[72876.008603] cfg80211: Current regulatory domain updated by AP to: AU
[72876.008608]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72876.008614]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[72878.020162] wlan0: deauthenticating from ec:44:76:80:62:c1 by local choice (reason=3)
[72878.036565] cfg80211: All devices are disconnected, going to restore regulatory settings
[72878.036574] cfg80211: Restoring regulatory settings
[72878.036580] cfg80211: Calling CRDA to update world regulatory domain
[72878.044629] cfg80211: World regulatory domain updated:
[72878.044636]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72878.044643]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[72878.044650]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[72878.044656]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[72878.044663]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[72878.044669]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[72879.519437] wlan0: authenticate with ec:44:76:80:62:c1 (try 1)
[72879.520875] wlan0: authenticated
[72879.520939] wlan0: associate with ec:44:76:80:62:c1 (try 1)
[72879.523546] wlan0: RX AssocResp from ec:44:76:80:62:c1 (capab=0x431 status=0 aid=1)
[72879.523554] wlan0: associated
[72879.525569] cfg80211: Calling CRDA for country: AU
[72879.532969] cfg80211: Received country IE:
[72879.532976] cfg80211: Regulatory domain: AU
[72879.532981]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72879.532988]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (10000 mBi, 3000 mBm)
[72879.532992] cfg80211: CRDA thinks this should applied:
[72879.532996] cfg80211: Regulatory domain: AU
[72879.533005]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72879.533011]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[72879.533018]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
[72879.533024]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
[72879.533030]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[72879.533035] cfg80211: We intersect both of these and get:
[72879.533039] cfg80211: Regulatory domain: 98
[72879.533043]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72879.533049]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[72879.533059] cfg80211: Leaving channel 5180 MHz intact on phy0 - no rule found in band on Country IE
[72879.533065] cfg80211: Leaving channel 5200 MHz intact on phy0 - no rule found in band on Country IE
[72879.533071] cfg80211: Leaving channel 5220 MHz intact on phy0 - no rule found in band on Country IE
[72879.533077] cfg80211: Leaving channel 5240 MHz intact on phy0 - no rule found in band on Country IE
[72879.533082] cfg80211: Leaving channel 5260 MHz intact on phy0 - no rule found in band on Country IE
[72879.533088] cfg80211: Leaving channel 5280 MHz intact on phy0 - no rule found in band on Country IE
[72879.533094] cfg80211: Leaving channel 5300 MHz intact on phy0 - no rule found in band on Country IE
[72879.533100] cfg80211: Leaving channel 5320 MHz intact on phy0 - no rule found in band on Country IE
[72879.533106] cfg80211: Leaving channel 5745 MHz intact on phy0 - no rule found in band on Country IE
[72879.533111] cfg80211: Leaving channel 5765 MHz intact on phy0 - no rule found in band on Country IE
[72879.533117] cfg80211: Leaving channel 5785 MHz intact on phy0 - no rule found in band on Country IE
[72879.533123] cfg80211: Leaving channel 5805 MHz intact on phy0 - no rule found in band on Country IE
[72879.533129] cfg80211: Leaving channel 5825 MHz intact on phy0 - no rule found in band on Country IE
[72879.533136] cfg80211: Current regulatory domain updated by AP to: AU
[72879.533140]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72879.533146]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[72881.544162] wlan0: deauthenticating from ec:44:76:80:62:c1 by local choice (reason=3)
[72881.560503] cfg80211: All devices are disconnected, going to restore regulatory settings
[72881.560512] cfg80211: Restoring regulatory settings
[72881.560518] cfg80211: Calling CRDA to update world regulatory domain
[72881.567978] cfg80211: World regulatory domain updated:
[72881.567985]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72881.567992]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[72881.567999]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[72881.568005]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[72881.568011]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[72881.568018]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[72882.994561] wlan0: direct probe to ec:44:76:80:62:be (try 1)
[72883.192079] wlan0: direct probe to ec:44:76:80:62:be (try 2)
[72883.392058] wlan0: direct probe to ec:44:76:80:62:be (try 3)
[72883.592080] wlan0: direct probe to ec:44:76:80:62:be timed out
[72894.540577] wlan0: direct probe to ec:44:76:80:65:02 (try 1)
[72894.740080] wlan0: direct probe to ec:44:76:80:65:02 (try 2)
[72894.940067] wlan0: direct probe to ec:44:76:80:65:02 (try 3)
[72895.140057] wlan0: direct probe to ec:44:76:80:65:02 timed out
[72899.682340] iwl3945 0000:10:00.0: Failed to get channel info for channel 6 [1]
[72899.683901] wlan0: direct probe to ec:44:76:80:62:ce (try 1)
[72899.880065] wlan0: direct probe to ec:44:76:80:62:ce (try 2)
[72900.080076] wlan0: direct probe to ec:44:76:80:62:ce (try 3)
[72900.280056] wlan0: direct probe to ec:44:76:80:62:ce timed out
[72911.171086] wlan0: direct probe to ec:44:76:80:65:02 (try 1)
[72911.369040] wlan0: direct probe to ec:44:76:80:65:02 (try 2)
[72911.569071] wlan0: direct probe to ec:44:76:80:65:02 (try 3)
[72911.769041] wlan0: direct probe to ec:44:76:80:65:02 timed out
[72922.660442] iwl3945 0000:10:00.0: Failed to get channel info for channel 6 [1]
[72922.662049] wlan0: authenticate with ec:44:76:80:65:0d (try 1)
[72922.669034] wlan0: authenticated
[72922.669081] wlan0: associate with ec:44:76:80:65:0d (try 1)
[72922.672097] wlan0: RX AssocResp from ec:44:76:80:65:0d (capab=0x11 status=0 aid=2)
[72922.672104] wlan0: associated
[72922.674535] cfg80211: Calling CRDA for country: AU
[72922.681383] cfg80211: Received country IE:
[72922.681388] cfg80211: Regulatory domain: AU
[72922.681390]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72922.681394]     (5170000 KHz - 5330000 KHz @ 40000 KHz), (10000 mBi, 1700 mBm)
[72922.681397]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (10000 mBi, 3000 mBm)
[72922.681400] cfg80211: CRDA thinks this should applied:
[72922.681402] cfg80211: Regulatory domain: AU
[72922.681404]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72922.681408]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[72922.681411]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
[72922.681415]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
[72922.681418]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[72922.681420] cfg80211: We intersect both of these and get:
[72922.681423] cfg80211: Regulatory domain: 98
[72922.681425]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72922.681428]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[72922.681432]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[72922.681435]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[72922.681441] cfg80211: Leaving channel 2412 MHz intact on phy0 - no rule found in band on Country IE
[72922.681444] cfg80211: Leaving channel 2417 MHz intact on phy0 - no rule found in band on Country IE
[72922.681447] cfg80211: Leaving channel 2422 MHz intact on phy0 - no rule found in band on Country IE
[72922.681450] cfg80211: Leaving channel 2427 MHz intact on phy0 - no rule found in band on Country IE
[72922.681453] cfg80211: Leaving channel 2432 MHz intact on phy0 - no rule found in band on Country IE
[72922.681457] cfg80211: Leaving channel 2437 MHz intact on phy0 - no rule found in band on Country IE
[72922.681460] cfg80211: Leaving channel 2442 MHz intact on phy0 - no rule found in band on Country IE
[72922.681463] cfg80211: Leaving channel 2447 MHz intact on phy0 - no rule found in band on Country IE
[72922.681466] cfg80211: Leaving channel 2452 MHz intact on phy0 - no rule found in band on Country IE
[72922.681469] cfg80211: Leaving channel 2457 MHz intact on phy0 - no rule found in band on Country IE
[72922.681473] cfg80211: Leaving channel 2462 MHz intact on phy0 - no rule found in band on Country IE
[72922.681478] cfg80211: Current regulatory domain updated by AP to: AU
[72922.681480]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[72922.681484]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[72922.681487]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[72922.681491]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[73141.560113] wlan0: deauthenticating from ec:44:76:80:65:0d by local choice (reason=3)
[73141.563746] wlan0: direct probe to ec:44:76:80:65:02 (try 1)
[73141.760075] wlan0: direct probe to ec:44:76:80:65:02 (try 2)
[73141.960061] wlan0: direct probe to ec:44:76:80:65:02 (try 3)
[73142.160059] wlan0: direct probe to ec:44:76:80:65:02 timed out
[73152.982333] iwl3945 0000:10:00.0: Failed to get channel info for channel 6 [1]
[73152.984233] wlan0: authenticate with ec:44:76:80:65:0d (try 1)
[73152.989033] wlan0: authenticated
[73152.989077] wlan0: associate with ec:44:76:80:65:0d (try 1)
[73152.991321] wlan0: RX AssocResp from ec:44:76:80:65:0d (capab=0x11 status=0 aid=2)
[73152.991328] wlan0: associated
[73481.524123] wlan0: deauthenticating from ec:44:76:80:65:0d by local choice (reason=3)
[73481.526133] wlan0: direct probe to ec:44:76:80:65:02 (try 1)
[73481.724074] wlan0: direct probe to ec:44:76:80:65:02 (try 2)
[73481.924053] wlan0: direct probe to ec:44:76:80:65:02 (try 3)
[73482.124051] wlan0: direct probe to ec:44:76:80:65:02 timed out
[73492.900515] iwl3945 0000:10:00.0: Failed to get channel info for channel 6 [1]
[73492.902253] wlan0: authenticate with ec:44:76:80:65:0d (try 1)
[73492.902939] wlan0: authenticated
[73492.902981] wlan0: associate with ec:44:76:80:65:0d (try 1)
[73492.904712] wlan0: RX AssocResp from ec:44:76:80:65:0d (capab=0x11 status=0 aid=2)
[73492.904719] wlan0: associated
[82018.933093] Skipping EDID probe due to cached edid
[85217.360104] Skipping EDID probe due to cached edid
[87020.019685] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[87020.142100] EXT4-fs (sda3): re-mounted. Opts: commit=0
[87021.589091] wlan0: deauthenticating from ec:44:76:80:65:0d by local choice (reason=3)
[87021.617474] cfg80211: All devices are disconnected, going to restore regulatory settings
[87021.617482] cfg80211: Restoring regulatory settings
[87021.617486] cfg80211: Calling CRDA to update world regulatory domain
[87022.125835] cfg80211: World regulatory domain updated:
[87022.125842]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[87022.125849]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[87022.125855]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[87022.125862]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[87022.125868]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[87022.125874]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[87022.652896] PM: Syncing filesystems ... done.
[87022.656904] PM: Preparing system for mem sleep
[87022.948216] Freezing user space processes ... (elapsed 0.01 seconds) done.
[87022.964089] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[87022.980065] PM: Entering mem sleep
[87022.980095] Suspending console(s) (use no_console_suspend to debug)
[87022.980846] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[87022.984424] sd 2:0:0:0: [sda] Stopping disk
[87023.023495] ACPI handle has no context!
[87023.023749] e100 0000:02:08.0: PME# enabled
[87023.023759] e100 0000:02:08.0: wake-up capability enabled by ACPI
[87023.024067] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[87023.024076] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[87023.024151] ata_piix 0000:00:1f.1: PCI INT A disabled
[87023.024318] i915 0000:00:02.0: PCI INT A disabled
[87023.128128] HDA Intel 0000:00:1b.0: PCI INT A disabled
[87023.164043] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3
[87023.164050] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 139.960 msecs
[87023.388628] PM: suspend of drv:sd dev:2:0:0:0 complete after 407.788 msecs
[87023.388643] PM: suspend of drv:scsi dev:target2:0:0 complete after 407.734 msecs
[87023.388655] PM: suspend of drv:scsi dev:host2 complete after 407.664 msecs
[87023.420020] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 396.013 msecs
[87023.420034] PM: suspend of drv: dev:pci0000:00 complete after 395.869 msecs
[87023.420046] PM: suspend of devices complete after 439.522 msecs
[87023.420050] PM: suspend devices took 0.440 seconds
[87023.436270] PM: late suspend of devices complete after 16.215 msecs
[87023.436535] ACPI: Preparing to enter system sleep state S3
[87023.436693] PM: Saving platform NVS memory
[87023.439933] Disabling non-boot CPUs ...
[87023.544039] CPU 1 is now offline
[87023.544043] SMP alternatives: switching to UP code
[87023.549387] Extended CMOS year: 2000
[87023.549387] Back to C!
[87023.549387] PM: Restoring platform NVS memory
[87023.549387] CPU0: Thermal monitoring handled by SMI
[87023.549387] Extended CMOS year: 2000
[87023.549387] Enabling non-boot CPUs ...
[87023.549387] SMP alternatives: switching to SMP code
[87023.554613] Booting Node 0 Processor 1 APIC 0x1
[87023.548958] Initializing CPU#1
[87023.548958] CPU1: Thermal monitoring handled by SMI
[87023.668537] CPU1 is up
[87023.669061] ACPI: Waking up from system sleep state S3
[87023.805364] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[87023.805396] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xf0500000)
[87023.805402] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[87023.805427] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[87023.805449] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[87023.805457] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[87023.805491] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x4010a)
[87023.805505] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x3fb13fa1)
[87023.805511] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0x3f903f80)
[87023.805517] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x20004040)
[87023.805527] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[87023.805535] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[87023.805587] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x4020a)
[87023.805600] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x3fd13fc1)
[87023.805606] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf000f000)
[87023.805613] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x20005050)
[87023.805623] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[87023.805631] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[87023.805671] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
[87023.805685] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x3021)
[87023.805700] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[87023.805724] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x105)
[87023.805744] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xf0584000)
[87023.805754] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[87023.805788] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x43f14001)
[87023.805795] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xf030f010)
[87023.805801] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x228000f0, writing 0x22802020)
[87023.805814] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)
[87023.805882] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[87023.805896] ata_piix 0000:00:1f.1: restoring config space at offset 0x8 (was 0xc01, writing 0x3041)
[87023.805911] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[87023.805942] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0xfec01000, writing 0xf0585000)
[87023.805948] ahci 0000:00:1f.2: restoring config space at offset 0x8 (was 0x1301, writing 0x3071)
[87023.805962] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[87023.806058] iwl3945 0000:10:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[87023.806125] iwl3945 0000:10:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0000000)
[87023.806139] iwl3945 0000:10:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[87023.806159] iwl3945 0000:10:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406)
[87023.806284] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010b)
[87023.806291] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xe (was 0x0, writing 0x28fc)
[87023.806298] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xd (was 0x0, writing 0x2800)
[87023.806304] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xc (was 0x0, writing 0x24fc)
[87023.806311] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xb (was 0x0, writing 0x2400)
[87023.806318] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xa (was 0x0, writing 0x47fff000)
[87023.806325] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x9 (was 0x0, writing 0x44000000)
[87023.806332] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x8 (was 0x0, writing 0x43fff000)
[87023.806339] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x7 (was 0x0, writing 0x40000000)
[87023.806346] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302)
[87023.806355] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0100000)
[87023.806361] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a810)
[87023.806370] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007)
[87023.806417] e100 0000:02:08.0: restoring config space at offset 0xf (was 0x38080100, writing 0x38080105)
[87023.806436] e100 0000:02:08.0: restoring config space at offset 0x5 (was 0x1, writing 0x2001)
[87023.806442] e100 0000:02:08.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0101000)
[87023.806448] e100 0000:02:08.0: restoring config space at offset 0x3 (was 0x0, writing 0x4010)
[87023.806456] e100 0000:02:08.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900007)
[87023.806980] PM: early resume of devices complete after 1.755 msecs
[87023.808317] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[87023.809001] i915 0000:00:02.0: setting latency timer to 64
[87023.810411] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[87023.810447] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[87023.810482] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[87023.810515] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[87023.810526] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[87023.810536] HDA Intel 0000:00:1b.0: setting latency timer to 64
[87023.810589] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[87023.810638] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[87023.810646] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[87023.810675] usb usb2: root hub lost power or was reset
[87023.810700] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[87023.810708] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[87023.810753] pci 0000:00:1e.0: setting latency timer to 64
[87023.810770] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[87023.810776] ata_piix 0000:00:1f.1: setting latency timer to 64
[87023.810810] ahci 0000:00:1f.2: setting latency timer to 64
[87023.810879] e100 0000:02:08.0: wake-up capability disabled by ACPI
[87023.810885] e100 0000:02:08.0: PME# disabled
[87023.810970] sd 2:0:0:0: [sda] Starting disk
[87023.811196] ata2: port disabled. ignoring.
[87023.812558] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000005) is beyond end of object (20100428/exoparg2-418)
[87023.812568] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C20E] (Node f7023510), AE_AML_PACKAGE_LIMIT
[87023.812599] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C002.C0DD.C318._STM] (Node f7026378), AE_AML_PACKAGE_LIMIT
[87023.812693] ata1: ACPI set timing mode failed (status=0x300b)
[87023.952062] PM: resume of drv:usb dev:usb2 complete after 141.137 msecs
[87023.952089] PM: resume of drv:hub dev:2-0:1.0 complete after 141.157 msecs
[87024.088463] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[87024.088468] ata1.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
[87024.104388] ata1.00: configured for MWDMA2
[87026.876053] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[87026.878939] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[87026.878944] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[87026.884348] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[87026.884356] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[87026.888551] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[87026.888556] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[87026.888763] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[87026.888771] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[87026.889948] ata3.00: configured for UDMA/133
[87026.906674] ata3.00: configured for UDMA/133
[87026.906680] ata3: EH complete
[87026.925534] PM: resume of drv:sd dev:2:0:0:0 complete after 3114.558 msecs
[87026.925557] PM: resume of drv:scsi_disk dev:2:0:0:0 complete after 2971.727 msecs
[87026.925566] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 3114.559 msecs
[87027.076042] PM: resume of drv:pcmcia_socket dev:pcmcia_socket0 complete after 138.730 msecs
[87027.076179] PM: resume of devices complete after 3269.154 msecs
[87027.076370] PM: resume devices took 3.272 seconds
[87027.076412] PM: Finishing wakeup.
[87027.076414] Restarting tasks ... done.
[87027.087763] video LNXVIDEO:00: Restoring backlight state
[87027.099186] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[87027.158361] Skipping EDID probe due to cached edid
[87027.245160] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[87027.274052] ADDRCONF(NETDEV_UP): eth0: link is not ready
[87028.946762] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[87030.292562] EXT4-fs (sda3): re-mounted. Opts: commit=0
[87031.467991] wlan0: authenticate with ec:44:76:80:65:0d (try 1)
[87031.468871] wlan0: authenticated
[87031.468917] wlan0: associate with ec:44:76:80:65:0d (try 1)
[87031.470465] wlan0: RX AssocResp from ec:44:76:80:65:0d (capab=0x11 status=0 aid=6)
[87031.470472] wlan0: associated
[87031.472253] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[87031.472342] cfg80211: Calling CRDA for country: AU
[87031.480157] cfg80211: Received country IE:
[87031.480163] cfg80211: Regulatory domain: AU
[87031.480168]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[87031.480175]     (5170000 KHz - 5330000 KHz @ 40000 KHz), (10000 mBi, 1700 mBm)
[87031.480181]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (10000 mBi, 3000 mBm)
[87031.480186] cfg80211: CRDA thinks this should applied:
[87031.480190] cfg80211: Regulatory domain: AU
[87031.480194]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[87031.480200]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[87031.480206]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
[87031.480212]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
[87031.480219]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[87031.480223] cfg80211: We intersect both of these and get:
[87031.480228] cfg80211: Regulatory domain: 98
[87031.480231]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[87031.480238]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[87031.480244]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[87031.480250]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[87031.480258] cfg80211: Leaving channel 2412 MHz intact on phy0 - no rule found in band on Country IE
[87031.480264] cfg80211: Leaving channel 2417 MHz intact on phy0 - no rule found in band on Country IE
[87031.480270] cfg80211: Leaving channel 2422 MHz intact on phy0 - no rule found in band on Country IE
[87031.480276] cfg80211: Leaving channel 2427 MHz intact on phy0 - no rule found in band on Country IE
[87031.480282] cfg80211: Leaving channel 2432 MHz intact on phy0 - no rule found in band on Country IE
[87031.480288] cfg80211: Leaving channel 2437 MHz intact on phy0 - no rule found in band on Country IE
[87031.480294] cfg80211: Leaving channel 2442 MHz intact on phy0 - no rule found in band on Country IE
[87031.480299] cfg80211: Leaving channel 2447 MHz intact on phy0 - no rule found in band on Country IE
[87031.480305] cfg80211: Leaving channel 2452 MHz intact on phy0 - no rule found in band on Country IE
[87031.480311] cfg80211: Leaving channel 2457 MHz intact on phy0 - no rule found in band on Country IE
[87031.480317] cfg80211: Leaving channel 2462 MHz intact on phy0 - no rule found in band on Country IE
[87031.480326] cfg80211: Current regulatory domain updated by AP to: AU
[87031.480330]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[87031.480337]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[87031.480343]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[87031.480349]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[87042.160039] wlan0: no IPv6 routers present
[87080.500120] wlan0: deauthenticating from ec:44:76:80:65:0d by local choice (reason=3)
[87080.500204] iwl3945 0000:10:00.0: Failed to get channel info for channel 64 [0]
[87080.502032] wlan0: direct probe to ec:44:76:80:65:02 (try 1)
[87080.700080] wlan0: direct probe to ec:44:76:80:65:02 (try 2)
[87080.900056] wlan0: direct probe to ec:44:76:80:65:02 (try 3)
[87081.100072] wlan0: direct probe to ec:44:76:80:65:02 timed out
[87092.097049] wlan0: authenticate with ec:44:76:80:65:0d (try 1)
[87092.097728] wlan0: authenticated
[87092.097770] wlan0: associate with ec:44:76:80:65:0d (try 1)
[87092.100551] wlan0: RX AssocResp from ec:44:76:80:65:0d (capab=0x11 status=0 aid=6)
[87092.100558] wlan0: associated
[87120.500106] wlan0: deauthenticating from ec:44:76:80:65:0d by local choice (reason=3)
[87120.500226] iwl3945 0000:10:00.0: Failed to get channel info for channel 64 [0]
[87120.502677] wlan0: direct probe to ec:44:76:80:65:02 (try 1)
[87120.700072] wlan0: direct probe to ec:44:76:80:65:02 (try 2)
[87120.900057] wlan0: direct probe to ec:44:76:80:65:02 (try 3)
[87121.100059] wlan0: direct probe to ec:44:76:80:65:02 timed out
[87132.012524] wlan0: authenticate with ec:44:76:80:65:0d (try 1)
[87132.013190] wlan0: authenticated
[87132.013243] wlan0: associate with ec:44:76:80:65:0d (try 1)
[87132.014709] wlan0: RX AssocResp from ec:44:76:80:65:0d (capab=0x11 status=0 aid=6)
[87132.014716] wlan0: associated
[87271.236039] usb 1-2: new high speed USB device using ehci_hcd and address 2
[87271.691737] Initializing USB Mass Storage driver...
[87271.692465] scsi6 : usb-storage 1-2:1.0
[87271.692752] usbcore: registered new interface driver usb-storage
[87271.692755] USB Mass Storage support registered.
[87272.692946] scsi 6:0:0:0: Direct-Access     Nokia    N900              031 PQ: 0 ANSI: 2
[87272.693558] scsi 6:0:0:1: Direct-Access     Nokia    N900              031 PQ: 0 ANSI: 2
[87272.694713] sd 6:0:0:0: Attached scsi generic sg2 type 0
[87272.695051] sd 6:0:0:1: Attached scsi generic sg3 type 0
[87272.700767] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[87272.703739] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[88219.540112] Skipping EDID probe due to cached edid
[88739.612081] Skipping EDID probe due to cached edid
[98325.170909] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[98325.292089] EXT4-fs (sda3): re-mounted. Opts: commit=0
[98326.008110] wlan0: deauthenticating from ec:44:76:80:65:0d by local choice (reason=3)
[98326.063274] cfg80211: All devices are disconnected, going to restore regulatory settings
[98326.063286] cfg80211: Restoring regulatory settings
[98326.063292] cfg80211: Calling CRDA to update world regulatory domain
[98326.071631] cfg80211: World regulatory domain updated:
[98326.071639]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[98326.071647]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[98326.071653]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[98326.071660]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[98326.071666]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[98326.071672]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[98326.566475] PM: Syncing filesystems ... done.
[98326.571362] PM: Preparing system for mem sleep
[98326.840219] Freezing user space processes ... (elapsed 0.01 seconds) done.
[98326.856100] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[98326.872066] PM: Entering mem sleep
[98326.872097] Suspending console(s) (use no_console_suspend to debug)
[98326.889201] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[98326.889279] sd 2:0:0:0: [sda] Stopping disk
[98326.931838] ACPI handle has no context!
[98326.932105] e100 0000:02:08.0: PME# enabled
[98326.932115] e100 0000:02:08.0: wake-up capability enabled by ACPI
[98326.932457] ata_piix 0000:00:1f.1: PCI INT A disabled
[98326.932475] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[98326.932683] i915 0000:00:02.0: PCI INT A disabled
[98326.948045] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[98327.036173] HDA Intel 0000:00:1b.0: PCI INT A disabled
[98327.073042] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3
[98327.073050] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 140.560 msecs
[98327.287275] PM: suspend of drv:sd dev:2:0:0:0 complete after 398.080 msecs
[98327.287291] PM: suspend of drv:scsi dev:target2:0:0 complete after 398.041 msecs
[98327.287302] PM: suspend of drv:scsi dev:host2 complete after 397.977 msecs
[98327.316019] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 383.664 msecs
[98327.316032] PM: suspend of drv: dev:pci0000:00 complete after 383.140 msecs
[98327.316045] PM: suspend of devices complete after 443.499 msecs
[98327.316048] PM: suspend devices took 0.444 seconds
[98327.332268] PM: late suspend of devices complete after 16.215 msecs
[98327.332525] ACPI: Preparing to enter system sleep state S3
[98327.332685] PM: Saving platform NVS memory
[98327.335900] Disabling non-boot CPUs ...
[98327.440034] CPU 1 is now offline
[98327.440038] SMP alternatives: switching to UP code
[98327.445426] Extended CMOS year: 2000
[98327.445426] Back to C!
[98327.445426] PM: Restoring platform NVS memory
[98327.445426] CPU0: Thermal monitoring handled by SMI
[98327.445426] Extended CMOS year: 2000
[98327.445426] Enabling non-boot CPUs ...
[98327.445426] SMP alternatives: switching to SMP code
[98327.450677] Booting Node 0 Processor 1 APIC 0x1
[98327.444987] Initializing CPU#1
[98327.444987] CPU1: Thermal monitoring handled by SMI
[98327.556534] CPU1 is up
[98327.557047] ACPI: Waking up from system sleep state S3
[98327.693366] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[98327.693397] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xf0500000)
[98327.693403] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[98327.693429] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[98327.693451] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[98327.693458] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[98327.693493] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x4010a)
[98327.693506] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x3fb13fa1)
[98327.693512] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0x3f903f80)
[98327.693518] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040)
[98327.693529] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[98327.693537] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[98327.693588] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x4020a)
[98327.693602] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x3fd13fc1)
[98327.693608] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf000f000)
[98327.693614] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050)
[98327.693624] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[98327.693632] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[98327.693672] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
[98327.693687] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x3021)
[98327.693701] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[98327.693725] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x105)
[98327.693747] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xf0584000)
[98327.693756] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[98327.693792] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x43f14001)
[98327.693798] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xf030f010)
[98327.693804] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x228000f0, writing 0x22802020)
[98327.693817] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)
[98327.693885] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[98327.693899] ata_piix 0000:00:1f.1: restoring config space at offset 0x8 (was 0xc01, writing 0x3041)
[98327.693914] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[98327.693945] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0xfec01000, writing 0xf0585000)
[98327.693951] ahci 0000:00:1f.2: restoring config space at offset 0x8 (was 0x1301, writing 0x3071)
[98327.693966] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[98327.694062] iwl3945 0000:10:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[98327.694130] iwl3945 0000:10:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0000000)
[98327.694144] iwl3945 0000:10:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[98327.694163] iwl3945 0000:10:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406)
[98327.694289] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010b)
[98327.694296] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xe (was 0x0, writing 0x28fc)
[98327.694303] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xd (was 0x0, writing 0x2800)
[98327.694310] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xc (was 0x0, writing 0x24fc)
[98327.694316] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xb (was 0x0, writing 0x2400)
[98327.694323] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xa (was 0x0, writing 0x47fff000)
[98327.694330] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x9 (was 0x0, writing 0x44000000)
[98327.694337] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x8 (was 0x0, writing 0x43fff000)
[98327.694344] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x7 (was 0x0, writing 0x40000000)
[98327.694351] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302)
[98327.694360] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0100000)
[98327.694367] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a810)
[98327.694376] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007)
[98327.694423] e100 0000:02:08.0: restoring config space at offset 0xf (was 0x38080100, writing 0x38080105)
[98327.694443] e100 0000:02:08.0: restoring config space at offset 0x5 (was 0x1, writing 0x2001)
[98327.694449] e100 0000:02:08.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0101000)
[98327.694455] e100 0000:02:08.0: restoring config space at offset 0x3 (was 0x0, writing 0x4010)
[98327.694462] e100 0000:02:08.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900007)
[98327.695014] PM: early resume of devices complete after 1.787 msecs
[98327.697019] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[98327.697520] i915 0000:00:02.0: setting latency timer to 64
[98327.698941] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[98327.698977] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[98327.699011] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[98327.699044] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[98327.699055] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[98327.699064] HDA Intel 0000:00:1b.0: setting latency timer to 64
[98327.699115] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[98327.699171] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[98327.699178] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[98327.699208] usb usb2: root hub lost power or was reset
[98327.699212] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[98327.699221] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[98327.699236] pci 0000:00:1e.0: setting latency timer to 64
[98327.699257] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[98327.699265] ata_piix 0000:00:1f.1: setting latency timer to 64
[98327.699315] e100 0000:02:08.0: wake-up capability disabled by ACPI
[98327.699321] e100 0000:02:08.0: PME# disabled
[98327.699449] ata2: port disabled. ignoring.
[98327.700887] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000005) is beyond end of object (20100428/exoparg2-418)
[98327.700897] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C20E] (Node f7023510), AE_AML_PACKAGE_LIMIT
[98327.700929] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C002.C0DD.C318._STM] (Node f7026378), AE_AML_PACKAGE_LIMIT
[98327.700986] ahci 0000:00:1f.2: setting latency timer to 64
[98327.701086] sd 2:0:0:0: [sda] Starting disk
[98327.701112] ata1: ACPI set timing mode failed (status=0x300b)
[98327.841071] PM: resume of drv:usb dev:usb2 complete after 141.734 msecs
[98327.841098] PM: resume of drv:hub dev:2-0:1.0 complete after 141.756 msecs
[98328.033456] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[98328.033461] ata1.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
[98328.049394] ata1.00: configured for MWDMA2
[98330.825061] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[98330.827976] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[98330.827981] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[98330.836115] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[98330.836124] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[98330.840362] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[98330.840367] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[98330.840571] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[98330.840579] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[98330.841753] ata3.00: configured for UDMA/133
[98330.862573] ata3.00: configured for UDMA/133
[98330.862577] ata3: EH complete
[98330.877309] PM: resume of drv:sd dev:2:0:0:0 complete after 3177.650 msecs
[98330.877332] PM: resume of drv:scsi_disk dev:2:0:0:0 complete after 3034.550 msecs
[98330.877343] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 3177.661 msecs
[98331.028047] PM: resume of drv:pcmcia_socket dev:pcmcia_socket0 complete after 139.245 msecs
[98331.028227] PM: resume of devices complete after 3333.169 msecs
[98331.028507] PM: resume devices took 3.336 seconds
[98331.028549] PM: Finishing wakeup.
[98331.028551] Restarting tasks ... 
[98331.028599] usb 1-2: USB disconnect, address 2
[98331.055232] done.
[98331.055238] video LNXVIDEO:00: Restoring backlight state
[98331.116036] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[98331.168149] Skipping EDID probe due to cached edid
[98331.213066] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[98331.239323] ADDRCONF(NETDEV_UP): eth0: link is not ready
[98332.582965] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[98333.461574] EXT4-fs (sda3): re-mounted. Opts: commit=0
[98342.991938] iwl3945 0000:10:00.0: Failed to get channel info for channel 64 [0]
[98342.993805] wlan0: authenticate with 00:22:75:59:09:f2 (try 1)
[98342.995564] wlan0: authenticated
[98342.995607] wlan0: associate with 00:22:75:59:09:f2 (try 1)
[98343.008958] wlan0: RX AssocResp from 00:22:75:59:09:f2 (capab=0x431 status=0 aid=3)
[98343.008966] wlan0: associated
[98343.010874] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[98353.824015] wlan0: no IPv6 routers present
[102148.621109] Skipping EDID probe due to cached edid
[102529.537129] Skipping EDID probe due to cached edid
[103343.205858] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[103343.207356] SGI XFS Quota Management subsystem
[103343.220799] JFS: nTxBlock = 7948, nTxLock = 63588
[103343.305966] NTFS driver 2.1.29 [Flags: R/O MODULE].
[103343.329537] QNX4 filesystem 0.2.3 registered.
[103343.363982] Btrfs loaded
[103378.972090] Skipping EDID probe due to cached edid
[105181.231231] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[105181.324922] EXT4-fs (sda3): re-mounted. Opts: commit=0
[105183.093089] wlan0: deauthenticating from 00:22:75:59:09:f2 by local choice (reason=3)
[105183.122616] cfg80211: All devices are disconnected, going to restore regulatory settings
[105183.122624] cfg80211: Restoring regulatory settings
[105183.122628] cfg80211: Calling CRDA to update world regulatory domain
[105183.433281] cfg80211: World regulatory domain updated:
[105183.433288]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[105183.433292]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[105183.433295]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[105183.433299]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[105183.433302]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[105183.433306]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[105184.208745] PM: Syncing filesystems ... done.
[105184.214406] PM: Preparing system for mem sleep
[105184.632218] Freezing user space processes ... (elapsed 0.01 seconds) done.
[105184.648103] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[105184.664065] PM: Entering mem sleep
[105184.664095] Suspending console(s) (use no_console_suspend to debug)
[105184.664852] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[105184.688327] sd 2:0:0:0: [sda] Stopping disk
[105184.707395] ACPI handle has no context!
[105184.707651] e100 0000:02:08.0: PME# enabled
[105184.707661] e100 0000:02:08.0: wake-up capability enabled by ACPI
[105184.708009] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[105184.708031] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[105184.708395] i915 0000:00:02.0: PCI INT A disabled
[105184.708876] ata_piix 0000:00:1f.1: PCI INT A disabled
[105184.812146] HDA Intel 0000:00:1b.0: PCI INT A disabled
[105184.849043] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3
[105184.849050] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 140.925 msecs
[105185.092560] PM: suspend of drv:sd dev:2:0:0:0 complete after 427.713 msecs
[105185.092576] PM: suspend of drv:scsi dev:target2:0:0 complete after 427.676 msecs
[105185.092588] PM: suspend of drv:scsi dev:host2 complete after 427.641 msecs
[105185.124018] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 416.133 msecs
[105185.124032] PM: suspend of drv: dev:pci0000:00 complete after 415.601 msecs
[105185.124046] PM: suspend of devices complete after 459.520 msecs
[105185.124049] PM: suspend devices took 0.460 seconds
[105185.140269] PM: late suspend of devices complete after 16.215 msecs
[105185.140525] ACPI: Preparing to enter system sleep state S3
[105185.140685] PM: Saving platform NVS memory
[105185.144250] Disabling non-boot CPUs ...
[105185.252020] CPU 1 is now offline
[105185.252024] SMP alternatives: switching to UP code
[105185.258397] Extended CMOS year: 2000
[105185.258397] Back to C!
[105185.258397] PM: Restoring platform NVS memory
[105185.258397] CPU0: Thermal monitoring handled by SMI
[105185.258397] Extended CMOS year: 2000
[105185.258397] Enabling non-boot CPUs ...
[105185.258397] SMP alternatives: switching to SMP code
[105185.264609] Booting Node 0 Processor 1 APIC 0x1
[105185.257942] Initializing CPU#1
[105185.257942] CPU1: Thermal monitoring handled by SMI
[105185.376538] CPU1 is up
[105185.377045] ACPI: Waking up from system sleep state S3
[105185.513363] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[105185.513395] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xf0500000)
[105185.513401] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[105185.513427] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[105185.513449] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[105185.513456] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[105185.513491] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x4010a)
[105185.513505] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x3fb13fa1)
[105185.513511] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0x3f903f80)
[105185.513517] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x20004040)
[105185.513528] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[105185.513535] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[105185.513588] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x4020a)
[105185.513601] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x3fd13fc1)
[105185.513607] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf000f000)
[105185.513613] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x20005050)
[105185.513624] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[105185.513632] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[105185.513672] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
[105185.513687] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x3021)
[105185.513702] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[105185.513726] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x105)
[105185.513747] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xf0584000)
[105185.513756] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[105185.513792] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x43f14001)
[105185.513798] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xf030f010)
[105185.513804] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x228000f0, writing 0x22802020)
[105185.513817] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)
[105185.513885] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[105185.513899] ata_piix 0000:00:1f.1: restoring config space at offset 0x8 (was 0xc01, writing 0x3041)
[105185.513914] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[105185.513945] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0xfec01000, writing 0xf0585000)
[105185.513951] ahci 0000:00:1f.2: restoring config space at offset 0x8 (was 0x1301, writing 0x3071)
[105185.513966] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[105185.514063] iwl3945 0000:10:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[105185.514130] iwl3945 0000:10:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0000000)
[105185.514144] iwl3945 0000:10:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[105185.514163] iwl3945 0000:10:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406)
[105185.514289] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010b)
[105185.514296] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xe (was 0x0, writing 0x28fc)
[105185.514303] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xd (was 0x0, writing 0x2800)
[105185.514310] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xc (was 0x0, writing 0x24fc)
[105185.514317] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xb (was 0x0, writing 0x2400)
[105185.514323] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xa (was 0x0, writing 0x47fff000)
[105185.514330] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x9 (was 0x0, writing 0x44000000)
[105185.514337] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x8 (was 0x0, writing 0x43fff000)
[105185.514344] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x7 (was 0x0, writing 0x40000000)
[105185.514351] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302)
[105185.514360] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0100000)
[105185.514367] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a810)
[105185.514376] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007)
[105185.514423] e100 0000:02:08.0: restoring config space at offset 0xf (was 0x38080100, writing 0x38080105)
[105185.514443] e100 0000:02:08.0: restoring config space at offset 0x5 (was 0x1, writing 0x2001)
[105185.514449] e100 0000:02:08.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0101000)
[105185.514455] e100 0000:02:08.0: restoring config space at offset 0x3 (was 0x0, writing 0x4010)
[105185.514462] e100 0000:02:08.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900007)
[105185.514988] PM: early resume of devices complete after 1.763 msecs
[105185.516188] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[105185.517001] i915 0000:00:02.0: setting latency timer to 64
[105185.518381] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[105185.518417] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[105185.518452] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[105185.518485] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[105185.518497] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[105185.518505] HDA Intel 0000:00:1b.0: setting latency timer to 64
[105185.518559] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[105185.518609] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[105185.518617] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[105185.518646] usb usb2: root hub lost power or was reset
[105185.518672] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[105185.518680] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[105185.518726] pci 0000:00:1e.0: setting latency timer to 64
[105185.518743] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[105185.518749] ata_piix 0000:00:1f.1: setting latency timer to 64
[105185.518782] ahci 0000:00:1f.2: setting latency timer to 64
[105185.518844] e100 0000:02:08.0: wake-up capability disabled by ACPI
[105185.518851] e100 0000:02:08.0: PME# disabled
[105185.518903] sd 2:0:0:0: [sda] Starting disk
[105185.519092] ata2: port disabled. ignoring.
[105185.520512] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000005) is beyond end of object (20100428/exoparg2-418)
[105185.520522] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C20E] (Node f7023510), AE_AML_PACKAGE_LIMIT
[105185.520553] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C002.C0DD.C318._STM] (Node f7026378), AE_AML_PACKAGE_LIMIT
[105185.520648] ata1: ACPI set timing mode failed (status=0x300b)
[105185.660063] PM: resume of drv:usb dev:usb2 complete after 141.191 msecs
[105185.660090] PM: resume of drv:hub dev:2-0:1.0 complete after 141.215 msecs
[105185.796447] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[105185.796451] ata1.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
[105185.812389] ata1.00: configured for MWDMA2
[105188.584053] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[105188.586944] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[105188.586949] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[105188.594622] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[105188.594630] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[105188.598868] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[105188.598873] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[105188.599084] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[105188.599092] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[105188.600244] ata3.00: configured for UDMA/133
[105188.618662] ata3.00: configured for UDMA/133
[105188.618668] ata3: EH complete
[105188.635811] PM: resume of drv:sd dev:2:0:0:0 complete after 3116.901 msecs
[105188.635836] PM: resume of drv:scsi_disk dev:2:0:0:0 complete after 2974.054 msecs
[105188.635848] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 3116.930 msecs
[105188.784047] PM: resume of drv:pcmcia_socket dev:pcmcia_socket0 complete after 136.585 msecs
[105188.784185] PM: resume of devices complete after 3269.150 msecs
[105188.784469] PM: resume devices took 3.272 seconds
[105188.784511] PM: Finishing wakeup.
[105188.784513] Restarting tasks ... done.
[105188.799186] video LNXVIDEO:00: Restoring backlight state
[105188.807710] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[105188.933193] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[105188.945095] Skipping EDID probe due to cached edid
[105188.950437] ADDRCONF(NETDEV_UP): eth0: link is not ready
[105190.524634] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[105191.630758] EXT4-fs (sda3): re-mounted. Opts: commit=0
[105200.584921] iwl3945 0000:10:00.0: Failed to get channel info for channel 2 [1]
[105200.586480] wlan0: authenticate with ec:44:76:80:65:0d (try 1)
[105200.587106] wlan0: authenticated
[105200.587150] wlan0: associate with ec:44:76:80:65:0d (try 1)
[105200.588944] wlan0: RX AssocResp from ec:44:76:80:65:0d (capab=0x11 status=0 aid=1)
[105200.588951] wlan0: associated
[105200.591968] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[105200.592069] cfg80211: Calling CRDA for country: AU
[105200.607691] cfg80211: Received country IE:
[105200.607696] cfg80211: Regulatory domain: AU
[105200.607699]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[105200.607703]     (5170000 KHz - 5330000 KHz @ 40000 KHz), (10000 mBi, 1700 mBm)
[105200.607706]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (10000 mBi, 3000 mBm)
[105200.607709] cfg80211: CRDA thinks this should applied:
[105200.607711] cfg80211: Regulatory domain: AU
[105200.607713]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[105200.607717]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[105200.607720]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
[105200.607724]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
[105200.607727]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[105200.607729] cfg80211: We intersect both of these and get:
[105200.607732] cfg80211: Regulatory domain: 98
[105200.607734]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[105200.607737]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[105200.607741]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[105200.607744]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[105200.607749] cfg80211: Leaving channel 2412 MHz intact on phy0 - no rule found in band on Country IE
[105200.607753] cfg80211: Leaving channel 2417 MHz intact on phy0 - no rule found in band on Country IE
[105200.607756] cfg80211: Leaving channel 2422 MHz intact on phy0 - no rule found in band on Country IE
[105200.607759] cfg80211: Leaving channel 2427 MHz intact on phy0 - no rule found in band on Country IE
[105200.607762] cfg80211: Leaving channel 2432 MHz intact on phy0 - no rule found in band on Country IE
[105200.607765] cfg80211: Leaving channel 2437 MHz intact on phy0 - no rule found in band on Country IE
[105200.607769] cfg80211: Leaving channel 2442 MHz intact on phy0 - no rule found in band on Country IE
[105200.607772] cfg80211: Leaving channel 2447 MHz intact on phy0 - no rule found in band on Country IE
[105200.607775] cfg80211: Leaving channel 2452 MHz intact on phy0 - no rule found in band on Country IE
[105200.607778] cfg80211: Leaving channel 2457 MHz intact on phy0 - no rule found in band on Country IE
[105200.607781] cfg80211: Leaving channel 2462 MHz intact on phy0 - no rule found in band on Country IE
[105200.607787] cfg80211: Current regulatory domain updated by AP to: AU
[105200.607789]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[105200.607793]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[105200.607796]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[105200.607800]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[105210.673045] wlan0: no IPv6 routers present
[105282.040156] wlan0: deauthenticating from ec:44:76:80:65:0d by local choice (reason=3)
[105282.042097] wlan0: direct probe to ec:44:76:80:65:02 (try 1)
[105282.240078] wlan0: direct probe to ec:44:76:80:65:02 (try 2)
[105282.440059] wlan0: direct probe to ec:44:76:80:65:02 (try 3)
[105282.640056] wlan0: direct probe to ec:44:76:80:65:02 timed out
[105293.618780] iwl3945 0000:10:00.0: Failed to get channel info for channel 6 [1]
[105293.620491] wlan0: authenticate with ec:44:76:80:65:0d (try 1)
[105293.628231] wlan0: authenticated
[105293.628282] wlan0: associate with ec:44:76:80:65:0d (try 1)
[105293.629929] wlan0: RX AssocResp from ec:44:76:80:65:0d (capab=0x11 status=0 aid=1)
[105293.629933] wlan0: associated
[106614.019951] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=600
[106614.117077] EXT4-fs (sda3): re-mounted. Opts: commit=600
[106657.580930] HP WMI: Unknown key pressed - 3
[106657.691174] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[106657.860068] EXT4-fs (sda3): re-mounted. Opts: commit=0
[107075.783190] Skipping EDID probe due to cached edid
[107076.327413] Skipping EDID probe due to cached edid
[107109.582438] Skipping EDID probe due to cached edid
[107109.746403] Skipping EDID probe due to cached edid
[107164.706294] Skipping EDID probe due to cached edid
[107202.040138] wlan0: deauthenticating from ec:44:76:80:65:0d by local choice (reason=3)
[107202.042278] wlan0: direct probe to ec:44:76:80:65:02 (try 1)
[107202.240071] wlan0: direct probe to ec:44:76:80:65:02 (try 2)
[107202.440080] wlan0: direct probe to ec:44:76:80:65:02 (try 3)
[107202.640045] wlan0: direct probe to ec:44:76:80:65:02 timed out
[107213.412533] iwl3945 0000:10:00.0: Failed to get channel info for channel 6 [1]
[107213.414160] wlan0: authenticate with ec:44:76:80:65:0d (try 1)
[107213.414827] wlan0: authenticated
[107213.414871] wlan0: associate with ec:44:76:80:65:0d (try 1)
[107213.416264] wlan0: RX AssocResp from ec:44:76:80:65:0d (capab=0x11 status=0 aid=1)
[107213.416270] wlan0: associated
[107260.826554] Skipping EDID probe due to cached edid
[107267.562382] Skipping EDID probe due to cached edid
[107267.706478] Skipping EDID probe due to cached edid
[107282.855215] Skipping EDID probe due to cached edid
[107298.282275] Skipping EDID probe due to cached edid
[107301.562251] Skipping EDID probe due to cached edid
[107301.710368] Skipping EDID probe due to cached edid
[107321.891042] Skipping EDID probe due to cached edid
[108442.076354] Skipping EDID probe due to cached edid
[108442.116119] Skipping EDID probe due to cached edid
[108472.609100] Skipping EDID probe due to cached edid
[109318.325106] Skipping EDID probe due to cached edid
[109349.742261] Skipping EDID probe due to cached edid
[109349.870262] Skipping EDID probe due to cached edid
[109358.290469] Skipping EDID probe due to cached edid
[109358.434396] Skipping EDID probe due to cached edid
[109372.577685] Skipping EDID probe due to cached edid