[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:05:01 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=16ae3f4e-7baa-4dfa-a3cb-cd8b058038f3 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable) [ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bb6a1000 (usable) [ 0.000000] BIOS-e820: 00000000bb6a1000 - 00000000bb6a7000 (reserved) [ 0.000000] BIOS-e820: 00000000bb6a7000 - 00000000bb7bc000 (usable) [ 0.000000] BIOS-e820: 00000000bb7bc000 - 00000000bb80f000 (reserved) [ 0.000000] BIOS-e820: 00000000bb80f000 - 00000000bb908000 (usable) [ 0.000000] BIOS-e820: 00000000bb908000 - 00000000bbb0f000 (reserved) [ 0.000000] BIOS-e820: 00000000bbb0f000 - 00000000bbb19000 (usable) [ 0.000000] BIOS-e820: 00000000bbb19000 - 00000000bbb1f000 (reserved) [ 0.000000] BIOS-e820: 00000000bbb1f000 - 00000000bbb64000 (usable) [ 0.000000] BIOS-e820: 00000000bbb64000 - 00000000bbb9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bbb9f000 - 00000000bbbe2000 (usable) [ 0.000000] BIOS-e820: 00000000bbbe2000 - 00000000bbbff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bbbff000 - 00000000bbc00000 (usable) [ 0.000000] BIOS-e820: 00000000bbc00000 - 00000000bbe00000 (reserved) [ 0.000000] BIOS-e820: 00000000bc000000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbbc00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0BBE00000 mask FFFE00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009d400 (usable) [ 0.000000] modified: 000000000009d400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bb6a1000 (usable) [ 0.000000] modified: 00000000bb6a1000 - 00000000bb6a7000 (reserved) [ 0.000000] modified: 00000000bb6a7000 - 00000000bb7bc000 (usable) [ 0.000000] modified: 00000000bb7bc000 - 00000000bb80f000 (reserved) [ 0.000000] modified: 00000000bb80f000 - 00000000bb908000 (usable) [ 0.000000] modified: 00000000bb908000 - 00000000bbb0f000 (reserved) [ 0.000000] modified: 00000000bbb0f000 - 00000000bbb19000 (usable) [ 0.000000] modified: 00000000bbb19000 - 00000000bbb1f000 (reserved) [ 0.000000] modified: 00000000bbb1f000 - 00000000bbb64000 (usable) [ 0.000000] modified: 00000000bbb64000 - 00000000bbb9f000 (ACPI NVS) [ 0.000000] modified: 00000000bbb9f000 - 00000000bbbe2000 (usable) [ 0.000000] modified: 00000000bbbe2000 - 00000000bbbff000 (ACPI data) [ 0.000000] modified: 00000000bbbff000 - 00000000bbc00000 (usable) [ 0.000000] modified: 00000000bbc00000 - 00000000bbe00000 (reserved) [ 0.000000] modified: 00000000bc000000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bbc00000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 00bbc00000 page 2M [ 0.000000] kernel direct mapping tables up to bbc00000 @ 10000-14000 [ 0.000000] RAMDISK: 3786e000 - 37fefe50 [ 0.000000] ACPI: RSDP 00000000000f6f90 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 00000000bbbf43dd 00064 (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000) [ 0.000000] ACPI: FACP 00000000bbbe4000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 00000000bbbe5000 0A5E9 (v02 Intel CANTIGA 06040000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000bbb9efc0 00040 [ 0.000000] ACPI: HPET 00000000bbbfed86 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 00000000bbbfedbe 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: SLIC 00000000bbbfedfa 00176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001) [ 0.000000] ACPI: APIC 00000000bbbfef70 00068 (v01 PTLTD APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000bbbfefd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 00000000bbbf4479 001BC (v01 BrtRef DD01BRT 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bbbe3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000000bbc00000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000000bbc00000 [ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff] [ 0.000000] bootmap [0000000000017000 - 000000000002e77f] pages 18 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00bbc00000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019e2ccc] TEXT DATA BSS ==> [0001000000 - 00019e2ccc] [ 0.000000] #3 [003786e000 - 0037fefe50] RAMDISK ==> [003786e000 - 0037fefe50] [ 0.000000] #4 [000009d400 - 0000100000] BIOS reserved ==> [000009d400 - 0000100000] [ 0.000000] #5 [00019e3000 - 00019e31dc] BRK ==> [00019e3000 - 00019e31dc] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] found SMP MP-table at [ffff8800000f7110] f7110 [ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880001e00000-ffff8800047fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[8] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000bb6a1 [ 0.000000] 0: 0x000bb6a7 -> 0x000bb7bc [ 0.000000] 0: 0x000bb80f -> 0x000bb908 [ 0.000000] 0: 0x000bbb0f -> 0x000bbb19 [ 0.000000] 0: 0x000bbb1f -> 0x000bbb64 [ 0.000000] 0: 0x000bbb9f -> 0x000bbbe2 [ 0.000000] 0: 0x000bbbff -> 0x000bbc00 [ 0.000000] On node 0 totalpages: 768207 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 103 pages reserved [ 0.000000] DMA zone: 3822 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10458 pages used for memmap [ 0.000000] DMA32 zone: 753768 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bb6a1000 - 00000000bb6a7000 [ 0.000000] PM: Registered nosave memory: 00000000bb7bc000 - 00000000bb80f000 [ 0.000000] PM: Registered nosave memory: 00000000bb908000 - 00000000bbb0f000 [ 0.000000] PM: Registered nosave memory: 00000000bbb19000 - 00000000bbb1f000 [ 0.000000] PM: Registered nosave memory: 00000000bbb64000 - 00000000bbb9f000 [ 0.000000] PM: Registered nosave memory: 00000000bbbe2000 - 00000000bbbff000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff880001a01000, static data 90720 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 757590 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=16ae3f4e-7baa-4dfa-a3cb-cd8b058038f3 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3011556k/3076096k available (5313k kernel code, 3268k absent, 61272k reserved, 3011k data, 660k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1995.154 MHz processor. [ 0.001165] Console: colour VGA+ 80x25 [ 0.001168] console [tty0] enabled [ 0.010000] allocated 31457280 bytes of page_cgroup [ 0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.010000] hpet clockevent registered [ 0.010000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.30 BogoMIPS (lpj=19951540) [ 0.010000] Security Framework initialized [ 0.010000] AppArmor: AppArmor initialized [ 0.010000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010000] Mount-cache hash table entries: 256 [ 0.010000] Initializing cgroup subsys ns [ 0.010000] Initializing cgroup subsys cpuacct [ 0.010000] Initializing cgroup subsys memory [ 0.010000] Initializing cgroup subsys freezer [ 0.010000] Initializing cgroup subsys net_cls [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 1024K [ 0.010000] CPU 0/0x0 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 0 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] CPU0: Thermal monitoring enabled (TM1) [ 0.010000] using mwait in idle threads. [ 0.010000] Performance Counters: Core2 events, Intel PMU driver. [ 0.010000] ... version: 2 [ 0.010000] ... bit width: 40 [ 0.010000] ... generic counters: 2 [ 0.010000] ... value mask: 000000ffffffffff [ 0.010000] ... max period: 000000007fffffff [ 0.010000] ... fixed-purpose counters: 3 [ 0.010000] ... counter mask: 0000000700000003 [ 0.010000] ACPI: Core revision 20090521 [ 0.030062] Setting APIC routing to flat [ 0.030381] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.133859] CPU0: Intel Pentium(R) Dual-Core CPU T4200 @ 2.00GHz stepping 0a [ 0.140000] APIC calibration not consistent with PM-Timer: 289ms instead of 100ms [ 0.140000] APIC delta adjusted to PM-Timer: 1246872 (3615912) [ 0.140000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 3990.01 BogoMIPS (lpj=19950078) [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 1024K [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] CPU1: Thermal monitoring enabled (TM1) [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.291321] CPU1: Intel Pentium(R) Dual-Core CPU T4200 @ 2.00GHz stepping 0a [ 0.291331] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.300026] Brought up 2 CPUs [ 0.300028] Total of 2 processors activated (7980.32 BogoMIPS). [ 0.300079] CPU0 attaching sched-domain: [ 0.300082] domain 0: span 0-1 level MC [ 0.300084] groups: 0 1 [ 0.300089] CPU1 attaching sched-domain: [ 0.300091] domain 0: span 0-1 level MC [ 0.300093] groups: 1 0 [ 0.300166] Booting paravirtualized kernel on bare hardware [ 0.300176] regulator: core version 0.5 [ 0.300176] Time: 14:55:42 Date: 10/29/09 [ 0.300176] NET: Registered protocol family 16 [ 0.300211] ACPI: bus type pci registered [ 0.300287] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.300290] PCI: MCFG area at e0000000 reserved in E820 [ 0.310449] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.310451] PCI: Using configuration type 1 for base access [ 0.311320] bio: create slab at 0 [ 0.311320] ACPI: EC: Look up EC in DSDT [ 0.315061] ACPI: BIOS _OSI(Linux) query ignored [ 0.316437] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.370092] ACPI: Interpreter enabled [ 0.370096] ACPI: (supports S0 S3 S4 S5) [ 0.370120] ACPI: Using IOAPIC for interrupt routing [ 0.390315] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.390318] ACPI: EC: driver started in interrupt mode [ 0.390735] ACPI: No dock devices found. [ 0.391328] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.391424] pci 0000:00:02.0: reg 10 64bit mmio: [0xf8000000-0xf83fffff] [ 0.391432] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] [ 0.391437] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] [ 0.391477] pci 0000:00:02.1: reg 10 64bit mmio: [0xf8400000-0xf84fffff] [ 0.391579] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f] [ 0.391656] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f] [ 0.391741] pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f] [ 0.391823] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8904800-0xf8904bff] [ 0.391881] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.391886] pci 0000:00:1a.7: PME# disabled [ 0.391931] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8900000-0xf8903fff] [ 0.391976] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.391980] pci 0000:00:1b.0: PME# disabled [ 0.392043] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.392047] pci 0000:00:1c.0: PME# disabled [ 0.392112] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.392116] pci 0000:00:1c.1: PME# disabled [ 0.392181] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.392185] pci 0000:00:1c.2: PME# disabled [ 0.392249] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.392253] pci 0000:00:1c.3: PME# disabled [ 0.392318] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.392322] pci 0000:00:1c.4: PME# disabled [ 0.392383] pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f] [ 0.392459] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf] [ 0.392535] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df] [ 0.392615] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8904c00-0xf8904fff] [ 0.392675] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.392679] pci 0000:00:1d.7: PME# disabled [ 0.392868] pci 0000:00:1f.2: reg 10 io port: [0x1818-0x181f] [ 0.392874] pci 0000:00:1f.2: reg 14 io port: [0x180c-0x180f] [ 0.392880] pci 0000:00:1f.2: reg 18 io port: [0x1810-0x1817] [ 0.392886] pci 0000:00:1f.2: reg 1c io port: [0x1808-0x180b] [ 0.392892] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] [ 0.392898] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf8904000-0xf89047ff] [ 0.392932] pci 0000:00:1f.2: PME# supported from D3hot [ 0.392936] pci 0000:00:1f.2: PME# disabled [ 0.392967] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff] [ 0.392982] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] [ 0.393346] pci 0000:02:00.0: reg 10 64bit mmio: [0xf8500000-0xf8503fff] [ 0.393395] pci 0000:02:00.0: reg 18 io port: [0x2000-0x20ff] [ 0.393543] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.393774] pci 0000:02:00.0: supports D1 D2 [ 0.393776] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.393799] pci 0000:02:00.0: PME# disabled [ 0.393927] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.393931] pci 0000:00:1c.0: bridge 32bit mmio: [0xf8500000-0xf85fffff] [ 0.394013] pci 0000:03:00.0: reg 10 64bit mmio: [0xf8600000-0xf8601fff] [ 0.394111] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.394118] pci 0000:03:00.0: PME# disabled [ 0.394185] pci 0000:00:1c.1: bridge 32bit mmio: [0xf8600000-0xf86fffff] [ 0.394284] pci 0000:00:1c.3: bridge io port: [0x3000-0x3fff] [ 0.394288] pci 0000:00:1c.3: bridge 32bit mmio: [0xf4000000-0xf5ffffff] [ 0.394294] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff] [ 0.394340] pci 0000:00:1c.4: bridge io port: [0x4000-0x4fff] [ 0.394344] pci 0000:00:1c.4: bridge 32bit mmio: [0xf6000000-0xf7ffffff] [ 0.394350] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff] [ 0.394404] pci 0000:00:1e.0: transparent bridge [ 0.394444] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.394594] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.394704] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.394772] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.394841] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.394908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.394975] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.410338] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11) [ 0.410443] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11) [ 0.410546] ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11) [ 0.410648] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11) [ 0.410750] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11) [ 0.410852] ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11) [ 0.410954] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 0.411058] ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11) [ 0.411246] SCSI subsystem initialized [ 0.411437] libata version 3.00 loaded. [ 0.411437] usbcore: registered new interface driver usbfs [ 0.411437] usbcore: registered new interface driver hub [ 0.411437] usbcore: registered new device driver usb [ 0.411437] ACPI: WMI: Mapper loaded [ 0.411437] PCI: Using ACPI for IRQ routing [ 0.450007] Bluetooth: Core ver 2.15 [ 0.450023] NET: Registered protocol family 31 [ 0.450023] Bluetooth: HCI device and connection manager initialized [ 0.450023] Bluetooth: HCI socket layer initialized [ 0.450023] NetLabel: Initializing [ 0.450023] NetLabel: domain hash size = 128 [ 0.450023] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.450035] NetLabel: unlabeled traffic allowed by default [ 0.450080] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.450086] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.490010] pnp: PnP ACPI init [ 0.490033] ACPI: bus type pnp registered [ 0.491922] pnp: PnP ACPI: found 10 devices [ 0.491925] ACPI: ACPI bus type pnp unregistered [ 0.491939] system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.491946] system 00:07: ioport range 0x1200-0x120f has been reserved [ 0.491949] system 00:07: ioport range 0x480-0x48f has been reserved [ 0.491952] system 00:07: ioport range 0xffff-0xffff has been reserved [ 0.491954] system 00:07: ioport range 0xffff-0xffff has been reserved [ 0.491957] system 00:07: ioport range 0x400-0x47f has been reserved [ 0.491960] system 00:07: ioport range 0x1180-0x11ff has been reserved [ 0.491963] system 00:07: ioport range 0xfe00-0xfe00 has been reserved [ 0.491968] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.491971] system 00:09: iomem range 0xfed10000-0xfed13fff has been reserved [ 0.491974] system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.491977] system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.491980] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved [ 0.491983] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.496668] AppArmor: AppArmor Filesystem Enabled [ 0.496739] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.496743] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.496748] pci 0000:00:1c.0: MEM window: 0xf8500000-0xf85fffff [ 0.496753] pci 0000:00:1c.0: PREFETCH window: 0xc0000000-0xc00fffff [ 0.496757] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.496759] pci 0000:00:1c.1: IO window: disabled [ 0.496764] pci 0000:00:1c.1: MEM window: 0xf8600000-0xf86fffff [ 0.496768] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.496772] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 0.496773] pci 0000:00:1c.2: IO window: disabled [ 0.496778] pci 0000:00:1c.2: MEM window: disabled [ 0.496782] pci 0000:00:1c.2: PREFETCH window: disabled [ 0.496786] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 [ 0.496789] pci 0000:00:1c.3: IO window: 0x3000-0x3fff [ 0.496794] pci 0000:00:1c.3: MEM window: 0xf4000000-0xf5ffffff [ 0.496798] pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f1ffffff [ 0.496805] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:08 [ 0.496808] pci 0000:00:1c.4: IO window: 0x4000-0x4fff [ 0.496813] pci 0000:00:1c.4: MEM window: 0xf6000000-0xf7ffffff [ 0.496817] pci 0000:00:1c.4: PREFETCH window: 0x000000f2000000-0x000000f3ffffff [ 0.496823] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0d [ 0.496825] pci 0000:00:1e.0: IO window: disabled [ 0.496830] pci 0000:00:1e.0: MEM window: disabled [ 0.496834] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.496847] alloc irq_desc for 16 on node 0 [ 0.496849] alloc kstat_irqs on node 0 [ 0.496854] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.496859] pci 0000:00:1c.0: setting latency timer to 64 [ 0.496866] alloc irq_desc for 17 on node 0 [ 0.496868] alloc kstat_irqs on node 0 [ 0.496871] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.496875] pci 0000:00:1c.1: setting latency timer to 64 [ 0.496881] alloc irq_desc for 18 on node 0 [ 0.496883] alloc kstat_irqs on node 0 [ 0.496886] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.496890] pci 0000:00:1c.2: setting latency timer to 64 [ 0.496897] alloc irq_desc for 19 on node 0 [ 0.496898] alloc kstat_irqs on node 0 [ 0.496902] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.496905] pci 0000:00:1c.3: setting latency timer to 64 [ 0.496913] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.496917] pci 0000:00:1c.4: setting latency timer to 64 [ 0.496923] pci 0000:00:1e.0: setting latency timer to 64 [ 0.496928] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.496930] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.496933] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.496935] pci_bus 0000:02: resource 1 mem: [0xf8500000-0xf85fffff] [ 0.496937] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xc00fffff] [ 0.496940] pci_bus 0000:03: resource 1 mem: [0xf8600000-0xf86fffff] [ 0.496942] pci_bus 0000:05: resource 0 io: [0x3000-0x3fff] [ 0.496944] pci_bus 0000:05: resource 1 mem: [0xf4000000-0xf5ffffff] [ 0.496947] pci_bus 0000:05: resource 2 pref mem [0xf0000000-0xf1ffffff] [ 0.496949] pci_bus 0000:08: resource 0 io: [0x4000-0x4fff] [ 0.496951] pci_bus 0000:08: resource 1 mem: [0xf6000000-0xf7ffffff] [ 0.496954] pci_bus 0000:08: resource 2 pref mem [0xf2000000-0xf3ffffff] [ 0.496956] pci_bus 0000:0d: resource 3 io: [0x00-0xffff] [ 0.496959] pci_bus 0000:0d: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.496996] NET: Registered protocol family 2 [ 0.497171] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.498517] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.501380] Switched to high resolution mode on CPU 1 [ 0.503300] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.503877] TCP: Hash tables configured (established 524288 bind 65536) [ 0.503880] TCP reno registered [ 0.504017] NET: Registered protocol family 1 [ 0.504093] Trying to unpack rootfs image as initramfs... [ 0.510016] Switched to high resolution mode on CPU 0 [ 0.689307] Freeing initrd memory: 7687k freed [ 0.693098] Simple Boot Flag at 0x57 set to 0x1 [ 0.693297] Scanning for low memory corruption every 60 seconds [ 0.693448] audit: initializing netlink socket (disabled) [ 0.693465] type=2000 audit(1256828142.690:1): initialized [ 0.703455] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.704878] VFS: Disk quotas dquot_6.5.2 [ 0.704938] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.705486] fuse init (API version 7.12) [ 0.705567] msgmni has been set to 5896 [ 0.705770] alg: No test for stdrng (krng) [ 0.705784] io scheduler noop registered [ 0.705786] io scheduler anticipatory registered [ 0.705788] io scheduler deadline registered [ 0.705831] io scheduler cfq registered (default) [ 0.705843] pci 0000:00:02.0: Boot video device [ 0.706114] alloc irq_desc for 24 on node 0 [ 0.706116] alloc kstat_irqs on node 0 [ 0.706126] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.706135] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.706278] alloc irq_desc for 25 on node 0 [ 0.706280] alloc kstat_irqs on node 0 [ 0.706287] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.706295] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.706433] alloc irq_desc for 26 on node 0 [ 0.706435] alloc kstat_irqs on node 0 [ 0.706443] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X [ 0.706451] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.706585] alloc irq_desc for 27 on node 0 [ 0.706587] alloc kstat_irqs on node 0 [ 0.706594] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X [ 0.706603] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 0.706740] alloc irq_desc for 28 on node 0 [ 0.706742] alloc kstat_irqs on node 0 [ 0.706750] pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X [ 0.706758] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.706858] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.707028] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.709974] ACPI: AC Adapter [ADP1] (off-line) [ 0.710049] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.710053] ACPI: Power Button [PWRF] [ 0.710110] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.714549] ACPI: Lid Switch [LID0] [ 0.714594] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.714599] ACPI: Sleep Button [SLPB] [ 0.715445] ACPI: SSDT 00000000bbb1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.715941] ACPI: SSDT 00000000bbb19620 00549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.716574] Monitor-Mwait will be used to enter C-1 state [ 0.716598] Monitor-Mwait will be used to enter C-2 state [ 0.716604] Marking TSC unstable due to TSC halts in idle [ 0.716621] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 0.716646] processor LNXCPU:00: registered as cooling_device0 [ 0.717117] ACPI: SSDT 00000000bbb1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.717507] ACPI: SSDT 00000000bbb1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.718211] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 0.718229] processor LNXCPU:01: registered as cooling_device1 [ 0.756487] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.756495] ACPI: Thermal Zone [TZS0] (30 C) [ 0.770242] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.770250] ACPI: Thermal Zone [TZS1] (30 C) [ 0.771435] Linux agpgart interface v0.103 [ 0.771446] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.772624] brd: module loaded [ 0.773052] loop: module loaded [ 0.773126] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.773261] ahci 0000:00:1f.2: version 3.0 [ 0.773283] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.773323] alloc irq_desc for 29 on node 0 [ 0.773326] alloc kstat_irqs on node 0 [ 0.773337] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X [ 0.773393] ahci: SSS flag set, parallel bus scan disabled [ 0.773427] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.773430] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems [ 0.773435] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.830079] scsi0 : ahci [ 0.830204] scsi1 : ahci [ 0.830263] scsi2 : ahci [ 0.830319] scsi3 : ahci [ 0.830376] scsi4 : ahci [ 0.830434] scsi5 : ahci [ 0.830478] ata1: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904100 irq 29 [ 0.830482] ata2: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904180 irq 29 [ 0.830484] ata3: DUMMY [ 0.830485] ata4: DUMMY [ 0.830487] ata5: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904300 irq 29 [ 0.830490] ata6: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904380 irq 29 [ 0.831340] Fixed MDIO Bus: probed [ 0.831374] PPP generic driver version 2.4.2 [ 0.831479] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.831540] alloc irq_desc for 20 on node 0 [ 0.831542] alloc kstat_irqs on node 0 [ 0.831548] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 0.831568] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.831571] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.831662] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.835556] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.835562] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.835578] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xf8904800 [ 0.850010] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.850081] usb usb1: configuration #1 chosen from 1 choice [ 0.850111] hub 1-0:1.0: USB hub found [ 0.850118] hub 1-0:1.0: 6 ports detected [ 0.850215] alloc irq_desc for 23 on node 0 [ 0.850218] alloc kstat_irqs on node 0 [ 0.850222] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.850234] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.850237] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.850277] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.854172] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.854178] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.854191] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8904c00 [ 0.870009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.870067] usb usb2: configuration #1 chosen from 1 choice [ 0.870092] hub 2-0:1.0: USB hub found [ 0.870098] hub 2-0:1.0: 6 ports detected [ 0.870166] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.870186] uhci_hcd: USB Universal Host Controller Interface driver [ 0.870276] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.870283] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.870286] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.870320] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.870344] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 [ 0.870420] usb usb3: configuration #1 chosen from 1 choice [ 0.870445] hub 3-0:1.0: USB hub found [ 0.870451] hub 3-0:1.0: 2 ports detected [ 0.870531] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 0.870537] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.870541] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.870581] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.870604] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840 [ 0.870680] usb usb4: configuration #1 chosen from 1 choice [ 0.870705] hub 4-0:1.0: USB hub found [ 0.870715] hub 4-0:1.0: 2 ports detected [ 0.870789] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 0.870796] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.870799] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.870839] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.870862] uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001860 [ 0.870935] usb usb5: configuration #1 chosen from 1 choice [ 0.870962] hub 5-0:1.0: USB hub found [ 0.870968] hub 5-0:1.0: 2 ports detected [ 0.871041] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.871047] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.871050] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.871083] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.871105] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 0.871178] usb usb6: configuration #1 chosen from 1 choice [ 0.871204] hub 6-0:1.0: USB hub found [ 0.871210] hub 6-0:1.0: 2 ports detected [ 0.871280] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.871286] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.871290] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.871325] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.871358] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018a0 [ 0.871433] usb usb7: configuration #1 chosen from 1 choice [ 0.871458] hub 7-0:1.0: USB hub found [ 0.871463] hub 7-0:1.0: 2 ports detected [ 0.871538] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.871544] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.871547] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.871577] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.871609] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 0.871688] usb usb8: configuration #1 chosen from 1 choice [ 0.871712] hub 8-0:1.0: USB hub found [ 0.871718] hub 8-0:1.0: 2 ports detected [ 0.871819] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.898141] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.898147] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.898243] mice: PS/2 mouse device common for all mice [ 0.898343] rtc_cmos 00:08: RTC can wake from S4 [ 0.898381] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.898405] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.898510] device-mapper: uevent: version 1.0.3 [ 0.901155] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.901223] device-mapper: multipath: version 1.1.0 loaded [ 0.901226] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.901425] cpuidle: using governor ladder [ 0.901542] cpuidle: using governor menu [ 0.901945] TCP cubic registered [ 0.902067] NET: Registered protocol family 10 [ 0.902482] lo: Disabled Privacy Extensions [ 0.902768] NET: Registered protocol family 17 [ 0.902790] Bluetooth: L2CAP ver 2.13 [ 0.902792] Bluetooth: L2CAP socket layer initialized [ 0.902795] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.902797] Bluetooth: SCO socket layer initialized [ 0.902832] Bluetooth: RFCOMM TTY layer initialized [ 0.902836] Bluetooth: RFCOMM socket layer initialized [ 0.902838] Bluetooth: RFCOMM ver 1.11 [ 0.903576] PM: Resume from disk failed. [ 0.903589] registered taskstats version 1 [ 0.903710] Magic number: 13:579:941 [ 0.903813] rtc_cmos 00:08: setting system clock to 2009-10-29 14:55:43 UTC (1256828143) [ 0.903816] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.903818] EDD information not available. [ 0.937632] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.002555] Clocksource tsc unstable (delta = -85224670 ns) [ 1.091649] ACPI: Battery Slot [BAT0] (battery present) [ 1.172545] usb 1-5: new high speed USB device using ehci_hcd and address 2 [ 1.182548] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.183419] ata1.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133 [ 1.183422] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.184499] ata1.00: configured for UDMA/133 [ 1.200136] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54321 FB2O PQ: 0 ANSI: 5 [ 1.200258] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.200294] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.200336] sd 0:0:0:0: [sda] Write Protect is off [ 1.200339] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.200361] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.200489] sda: sda1 sda2 < sda5 > [ 1.244497] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.333569] usb 1-5: configuration #1 chosen from 1 choice [ 1.950059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.963217] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, AC00, max UDMA/100, ATAPI AN [ 1.963227] ata2.00: applying bridge limits [ 1.977305] ata2.00: configured for UDMA/100 [ 1.992772] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A AC00 PQ: 0 ANSI: 5 [ 1.998540] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.998543] Uniform CD-ROM driver Revision: 3.20 [ 1.998624] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.998670] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.342558] ata5: SATA link down (SStatus 0 SControl 300) [ 2.710056] ata6: SATA link down (SStatus 0 SControl 300) [ 2.730072] Freeing unused kernel memory: 660k freed [ 2.730263] Write protecting the kernel read-only data: 7580k [ 2.877463] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset [ 2.877912] agpgart-intel 0000:00:00.0: detected 65532K stolen memory [ 2.881000] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 2.931643] [drm] Initialized drm 1.1.0 20060810 [ 2.951326] sky2 driver version 1.23 [ 2.951549] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.951601] sky2 0000:02:00.0: setting latency timer to 64 [ 2.951692] sky2 0000:02:00.0: Yukon-2 Extreme chip revision 2 [ 2.952234] alloc irq_desc for 30 on node 0 [ 2.952236] alloc kstat_irqs on node 0 [ 2.952313] sky2 0000:02:00.0: irq 30 for MSI/MSI-X [ 2.953211] sky2 eth0: addr 00:1d:72:f5:5b:7f [ 2.961911] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.961917] i915 0000:00:02.0: setting latency timer to 64 [ 2.968113] Initializing USB Mass Storage driver... [ 2.968294] scsi6 : SCSI emulation for USB Mass Storage devices [ 2.968374] usbcore: registered new interface driver usb-storage [ 2.968380] USB Mass Storage support registered. [ 2.968493] usb-storage: device found at 2 [ 2.968494] usb-storage: waiting for device to settle before scanning [ 2.974577] alloc irq_desc for 31 on node 0 [ 2.974581] alloc kstat_irqs on node 0 [ 2.974590] i915 0000:00:02.0: irq 31 for MSI/MSI-X [ 3.077002] [drm] i2c_init DPDDC-D [ 3.209345] [drm] fb0: inteldrmfb frame buffer device [ 3.255530] acpi device:03: registered as cooling_device2 [ 3.255823] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input5 [ 3.255855] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.255882] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.584189] [drm] LVDS-8: set mode 1366x768 10 [ 4.049574] Console: switching to colour frame buffer device 170x48 [ 4.233161] PM: Starting manual resume from disk [ 4.233165] PM: Resume from partition 8:5 [ 4.233167] PM: Checking hibernation image. [ 4.233325] PM: Resume from disk failed. [ 4.255141] EXT4-fs (sda1): barriers enabled [ 4.276877] kjournald2 starting: pid 423, dev sda1:8, commit interval 5 seconds [ 4.276892] EXT4-fs (sda1): delayed allocation enabled [ 4.276895] EXT4-fs: file extents enabled [ 4.287996] EXT4-fs: mballoc enabled [ 4.288011] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 5.137587] type=1505 audit(1256828147.726:2): operation="profile_load" pid=446 name=/usr/share/gdm/guest-session/Xsession [ 5.140152] type=1505 audit(1256828147.736:3): operation="profile_load" pid=447 name=/sbin/dhclient3 [ 5.140874] type=1505 audit(1256828147.736:4): operation="profile_load" pid=447 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 5.141262] type=1505 audit(1256828147.736:5): operation="profile_load" pid=447 name=/usr/lib/connman/scripts/dhclient-script [ 5.177009] type=1505 audit(1256828147.766:6): operation="profile_load" pid=448 name=/usr/bin/evince [ 5.188379] type=1505 audit(1256828147.776:7): operation="profile_load" pid=448 name=/usr/bin/evince-previewer [ 5.195084] type=1505 audit(1256828147.786:8): operation="profile_load" pid=448 name=/usr/bin/evince-thumbnailer [ 5.211605] type=1505 audit(1256828147.806:9): operation="profile_load" pid=450 name=/usr/lib/cups/backend/cups-pdf [ 6.890650] Adding 6385796k swap on /dev/sda5. Priority:-1 extents:1 across:6385796k [ 7.433015] EXT4-fs (sda1): internal journal on sda1:8 [ 7.962820] usb-storage: device scan complete [ 7.964790] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 7.965365] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 7.969139] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 8.708114] udev: starting version 147 [ 10.184150] __ratelimit: 6 callbacks suppressed [ 10.184155] type=1505 audit(1256828152.776:12): operation="profile_replace" pid=761 name=/usr/share/gdm/guest-session/Xsession [ 10.186122] type=1505 audit(1256828152.776:13): operation="profile_replace" pid=762 name=/sbin/dhclient3 [ 10.186833] type=1505 audit(1256828152.776:14): operation="profile_replace" pid=762 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 10.187222] type=1505 audit(1256828152.776:15): operation="profile_replace" pid=762 name=/usr/lib/connman/scripts/dhclient-script [ 10.191257] type=1505 audit(1256828152.786:16): operation="profile_replace" pid=763 name=/usr/bin/evince [ 10.202600] type=1505 audit(1256828152.796:17): operation="profile_replace" pid=763 name=/usr/bin/evince-previewer [ 10.209368] type=1505 audit(1256828152.796:18): operation="profile_replace" pid=763 name=/usr/bin/evince-thumbnailer [ 10.219648] type=1505 audit(1256828152.806:19): operation="profile_replace" pid=767 name=/usr/lib/cups/backend/cups-pdf [ 10.220493] type=1505 audit(1256828152.816:20): operation="profile_replace" pid=767 name=/usr/sbin/cupsd [ 10.223213] type=1505 audit(1256828152.816:21): operation="profile_replace" pid=768 name=/usr/sbin/tcpdump [ 11.770091] cfg80211: Calling CRDA to update world regulatory domain [ 12.251664] lp: driver loaded but no devices found [ 12.260833] acer-wmi: Acer Laptop ACPI-WMI Extras [ 12.272775] acer-wmi: Brightness must be controlled by generic video driver [ 12.274961] ip_tables: (C) 2000-2006 Netfilter Core Team [ 13.130563] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa44000 [ 13.203059] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 14.143739] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k [ 14.143742] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 14.144005] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 14.144013] iwlagn 0000:03:00.0: setting latency timer to 64 [ 14.144041] iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 [ 14.185799] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 14.185861] alloc irq_desc for 32 on node 0 [ 14.185863] alloc kstat_irqs on node 0 [ 14.185884] iwlagn 0000:03:00.0: irq 32 for MSI/MSI-X [ 14.288293] cfg80211: World regulatory domain updated: [ 14.288298] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.288301] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.288304] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.288307] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.288309] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.288311] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.454864] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 14.467463] udev: renamed network interface wlan0 to wlan2 [ 14.728908] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 14.728919] alloc irq_desc for 21 on node 0 [ 14.728921] alloc kstat_irqs on node 0 [ 14.728927] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 14.728966] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 14.847722] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS... [ 14.847791] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 [ 18.039269] ppdev: user-space parallel port driver [ 19.405244] sky2 eth0: enabling interface [ 19.405765] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.443533] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode [ 19.863832] iwlagn 0000:03:00.0: loaded firmware version 228.61.2.24 [ 20.091681] Registered led device: iwl-phy0::radio [ 20.091703] Registered led device: iwl-phy0::assoc [ 20.091719] Registered led device: iwl-phy0::RX [ 20.091734] Registered led device: iwl-phy0::TX [ 20.152552] ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 30.117940] wlan2: authenticate with AP 00:18:4d:10:da:a0 [ 30.121097] wlan2: authenticated [ 30.121100] wlan2: associate with AP 00:18:4d:10:da:a0 [ 30.123160] wlan2: RX AssocResp from 00:18:4d:10:da:a0 (capab=0x411 status=0 aid=3) [ 30.123163] wlan2: associated [ 30.143141] ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready [ 40.192525] wlan2: no IPv6 routers present [ 1446.850062] sky2 eth0: disabling interface [ 1447.080113] wlan2: deauthenticating by local choice (reason=3) [ 1447.244571] wlan2: disassociating by local choice (reason=3) [ 1447.863059] PM: Syncing filesystems ... done. [ 1447.871622] PM: Preparing system for mem sleep [ 1447.871626] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 1447.872647] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 1447.872719] PM: Entering mem sleep [ 1447.872735] Suspending console(s) (use no_console_suspend to debug) [ 1447.980041] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1447.980166] sd 0:0:0:0: [sda] Stopping disk [ 1449.010614] ACPI handle has no context! [ 1449.030478] sky2 0000:02:00.0: PME# disabled [ 1449.150052] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 1449.150059] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 1449.150065] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 1449.150071] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 1449.260099] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 1449.280090] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3 [ 1449.280098] ehci_hcd 0000:00:1a.7: PCI INT C disabled [ 1449.280105] uhci_hcd 0000:00:1a.2: PCI INT C disabled [ 1449.280111] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 1449.280116] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 1449.345303] render error detected, EIR: 0x00000010 [ 1449.345306] IPEIR: 0x00000000 [ 1449.345308] IPEHR: 0x01000000 [ 1449.345309] INSTDONE: 0xfffffffe [ 1449.345311] INSTPS: 0x0001e000 [ 1449.345312] INSTDONE1: 0xffffffff [ 1449.345314] ACTHD: 0x06e09e38 [ 1449.345315] page table error [ 1449.345317] PGTBL_ER: 0x00100000 [ 1449.345320] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking [ 1449.360103] PM: suspend devices took 1.490 seconds [ 1449.360281] ehci_hcd 0000:00:1d.7: PME# disabled [ 1449.380298] ehci_hcd 0000:00:1a.7: PME# disabled [ 1449.700050] ACPI: Preparing to enter system sleep state S3 [ 1451.860583] Disabling non-boot CPUs ... [ 1451.970015] CPU 1 is now offline [ 1451.970018] SMP alternatives: switching to UP code [ 1451.976664] CPU0 attaching NULL sched-domain. [ 1451.976669] CPU1 attaching NULL sched-domain. [ 1451.976678] CPU0 attaching NULL sched-domain. [ 1451.976891] CPU1 is down [ 1451.976928] Extended CMOS year: 2000 [ 1451.976928] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 1451.976928] Back to C! [ 1451.976928] CPU0: Thermal LVT vector (0xfa) already installed [ 1451.976928] Extended CMOS year: 2000 [ 1451.976928] Enabling non-boot CPUs ... [ 1451.976928] SMP alternatives: switching to SMP code [ 1451.983326] Booting processor 1 APIC 0x1 ip 0x6000 [ 1451.976515] Initializing CPU#1 [ 1451.976515] Calibrating delay using timer specific routine.. 3990.07 BogoMIPS (lpj=19950396) [ 1451.976515] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1451.976515] CPU: L2 cache: 1024K [ 1451.976515] CPU 1/0x1 -> Node 0 [ 1451.976515] CPU: Physical Processor ID: 0 [ 1451.976515] CPU: Processor Core ID: 1 [ 1451.976515] mce: CPU supports 6 MCE banks [ 1451.976515] CPU1: Thermal monitoring enabled (TM1) [ 1451.976515] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 1452.141470] CPU1: Intel Pentium(R) Dual-Core CPU T4200 @ 2.00GHz stepping 0a [ 1452.141626] CPU0 attaching NULL sched-domain. [ 1452.142512] Switched to high resolution mode on CPU 1 [ 1452.180021] CPU0 attaching sched-domain: [ 1452.180024] domain 0: span 0-1 level MC [ 1452.180026] groups: 0 1 [ 1452.180030] CPU1 attaching sched-domain: [ 1452.180032] domain 0: span 0-1 level MC [ 1452.180034] groups: 1 0 [ 1452.182513] CPU1 is up [ 1452.182515] ACPI: Waking up from system sleep state S3 [ 1457.560216] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 1457.560228] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 1457.560254] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 1457.560281] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 1457.560312] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 1457.560327] uhci_hcd 0000:00:1a.2: restoring config space at offset 0xf (was 0x300, writing 0x30b) [ 1457.560338] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861) [ 1457.560349] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) [ 1457.560387] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 1457.560404] ehci_hcd 0000:00:1a.7: PME# disabled [ 1457.560418] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 1457.560433] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 1457.560438] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100102) [ 1457.560466] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010b) [ 1457.560475] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xc001c001) [ 1457.560480] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf850f850) [ 1457.560484] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020) [ 1457.560488] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x20200) [ 1457.560494] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 1457.560500] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 1457.560533] pcieport-driver 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x4020b) [ 1457.560542] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 1457.560548] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) [ 1457.560555] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 1457.560560] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 1457.560594] pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x4030a) [ 1457.560603] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 1457.560608] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) [ 1457.560616] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 1457.560621] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 1457.560655] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040a) [ 1457.560664] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xf1f1f001) [ 1457.560669] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030) [ 1457.560676] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 1457.560682] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 1457.560715] pcieport-driver 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010b) [ 1457.560724] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201) [ 1457.560730] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040) [ 1457.560737] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 1457.560742] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 1457.560786] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 1457.560816] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 1457.560847] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 1457.560885] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 1457.560901] ehci_hcd 0000:00:1d.7: PME# disabled [ 1457.560909] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff) [ 1457.560918] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 1457.560922] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 1457.560926] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [ 1457.560935] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [ 1457.560989] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 1457.561005] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 1457.561042] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x4, writing 0xc0100004) [ 1457.561225] sky2 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 1457.561321] sky2 0000:02:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x2001) [ 1457.561366] sky2 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf8500004) [ 1457.561394] sky2 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 1457.561438] sky2 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 1457.561671] iwlagn 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 1457.561701] iwlagn 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf8600004) [ 1457.561708] iwlagn 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 1457.561717] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106) [ 1457.881701] i915 0000:00:02.0: setting latency timer to 64 [ 1457.943727] [drm] LVDS-8: set mode 1366x768 10 [ 1457.963966] pci 0000:00:02.1: PME# disabled [ 1457.963977] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1457.963983] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1457.964003] usb usb3: root hub lost power or was reset [ 1457.964021] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1457.964026] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1457.964045] usb usb4: root hub lost power or was reset [ 1457.964062] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 1457.964067] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1457.964086] usb usb5: root hub lost power or was reset [ 1457.964102] ehci_hcd 0000:00:1a.7: PME# disabled [ 1457.964106] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 1457.964112] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1457.964135] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1457.964140] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 1457.964171] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1457.964176] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1457.964195] usb usb6: root hub lost power or was reset [ 1457.964211] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1457.964216] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1457.964236] usb usb7: root hub lost power or was reset [ 1457.964252] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1457.964257] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1457.964276] usb usb8: root hub lost power or was reset [ 1457.964292] ehci_hcd 0000:00:1d.7: PME# disabled [ 1457.964296] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1457.964302] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1457.964311] pci 0000:00:1e.0: setting latency timer to 64 [ 1457.964321] ahci 0000:00:1f.2: setting latency timer to 64 [ 1457.964417] sky2 0000:02:00.0: PME# disabled [ 1458.154257] sd 0:0:0:0: [sda] Starting disk [ 1458.310055] ata6: SATA link down (SStatus 0 SControl 300) [ 1458.330052] ata5: SATA link down (SStatus 0 SControl 300) [ 1458.350053] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1458.370033] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1458.371931] ata1.00: configured for UDMA/133 [ 1458.377309] ata2.00: configured for UDMA/100 [ 1458.390049] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [ 1458.390051] ata1: irq_stat 0x00400040, connection status changed [ 1458.390064] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [ 1458.390065] ata2: irq_stat 0x40000001 [ 1458.391938] ata1.00: configured for UDMA/133 [ 1458.391941] ata1: EH complete [ 1458.419702] ata2.00: configured for UDMA/100 [ 1458.419704] ata2: EH complete [ 1458.850047] usb 1-5: reset high speed USB device using ehci_hcd and address 2 [ 1459.019022] PM: resume devices took 1.450 seconds [ 1459.019056] PM: Finishing wakeup. [ 1459.019058] Restarting tasks ... done. [ 1459.128754] sky2 eth0: enabling interface [ 1459.129258] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1459.354862] Registered led device: iwl-phy0::radio [ 1459.354902] Registered led device: iwl-phy0::assoc [ 1459.354930] Registered led device: iwl-phy0::RX [ 1459.354957] Registered led device: iwl-phy0::TX [ 1459.487692] ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 1471.801567] wlan2: authenticate with AP 00:18:4d:10:da:a0 [ 1471.803528] wlan2: authenticated [ 1471.803532] wlan2: associate with AP 00:18:4d:10:da:a0 [ 1471.805800] wlan2: RX AssocResp from 00:18:4d:10:da:a0 (capab=0x411 status=0 aid=1) [ 1471.805804] wlan2: associated [ 1471.826057] ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready [ 1482.350029] wlan2: no IPv6 routers present