Error: command ['sh', '-c', 'dmesg | comm -13 /var/log/dmesg -'] failed with exit code 1: [   28.635071] CPU0 attaching NULL sched-domain.
[   28.635075] CPU1 attaching NULL sched-domain.
[   28.644173] CPU0 attaching sched-domain:
[   28.644177]  domain 0: span 0-1 level MC
[   28.644180]   groups: 0 1
[   28.644186] CPU1 attaching sched-domain:
[   28.644188]  domain 0: span 0-1 level MC
[   28.644191]   groups: 1 0
[   45.324518] CPU0 attaching NULL sched-domain.
[   45.324521] CPU1 attaching NULL sched-domain.
[   45.340577] CPU0 attaching sched-domain:
[   45.340581]  domain 0: span 0-1 level MC
[   45.340584]   groups: 0 1
[   45.340590] CPU1 attaching sched-domain:
[   45.340592]  domain 0: span 0-1 level MC
[   45.340595]   groups: 1 0
[   69.833766] wlan0: authenticate with AP 00:12:43:97:3a:90
[   69.835519] wlan0: authenticated
[   69.835521] wlan0: associate with AP 00:12:43:97:3a:90
[   69.839483] wlan0: RX AssocResp from 00:12:43:97:3a:90 (capab=0x421 status=0 aid=170)
[   69.839487] wlan0: associated
[   69.841260] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   80.284104] wlan0: no IPv6 routers present
[   91.561332] CPU0 attaching NULL sched-domain.
[   91.561344] CPU1 attaching NULL sched-domain.
[   91.580208] CPU0 attaching sched-domain:
[   91.580216]  domain 0: span 0-1 level MC
[   91.580222]   groups: 0 1
[   91.580233] CPU1 attaching sched-domain:
[   91.580238]  domain 0: span 0-1 level MC
[   91.580243]   groups: 1 0
[   91.912169] usb 4-2: USB disconnect, address 2
[   91.913131] btusb_intr_complete: hci0 urb ffff8800770586c0 failed to resubmit (19)
[   91.913148] btusb_bulk_complete: hci0 urb ffff880077058000 failed to resubmit (19)
[   91.914128] btusb_bulk_complete: hci0 urb ffff880078069480 failed to resubmit (19)
[   91.914337] btusb_send_frame: hci0 urb ffff8800599d0240 submission failed
[   92.054655] wlan0: disassociating by local choice (reason=3)
[   92.056170] wlan0: deauthenticated (Reason: 2)
[   92.104652] wlan0: deauthenticating by local choice (reason=3)
[   92.683109] PM: Syncing filesystems ... done.
[   92.685169] PM: Preparing system for mem sleep
[   92.685172] Freezing user space processes ... (elapsed 0.00 seconds) done.
[   92.685836] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[   92.685881] PM: Entering mem sleep
[   92.685893] Suspending console(s) (use no_console_suspend to debug)
[   92.952127] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[   92.952268] sd 0:0:0:0: [sda] Stopping disk
[   94.457478] ACPI handle has no context!
[   94.457484] sdhci-pci 0000:15:00.2: PME# disabled
[   94.457490] sdhci-pci 0000:15:00.2: PCI INT C disabled
[   94.457497] ACPI handle has no context!
[   94.477139] ACPI handle has no context!
[   94.556122] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[   94.556131] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[   94.556139] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[   94.556146] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[   94.556151] pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY
[   94.556155] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY
[   94.556159] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
[   94.556163] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY
[   94.556173] HDA Intel 0000:00:1b.0: PCI INT B disabled
[   94.572110] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[   94.572118] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[   94.572126] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[   94.572133] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[   94.572333] e1000e 0000:00:19.0: PCI INT A disabled
[   94.572338] e1000e 0000:00:19.0: PME# enabled
[   94.572343] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[   94.588142] ACPI handle has no context!
[   94.604340] heci 0000:00:03.0: PCI INT A disabled
[   94.672150] i915 0000:00:02.0: power state changed by ACPI to D3
[   94.672195] PM: suspend devices took 1.988 seconds
[   94.672313] ricoh-mmc: Suspending.
[   94.672327] ricoh-mmc: Controller is now re-enabled.
[   94.672528] ehci_hcd 0000:00:1d.7: PME# disabled
[   94.800052] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[   94.896055] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[   94.896283] ehci_hcd 0000:00:1a.7: PME# disabled
[   95.008055] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[   95.112054] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3
[   95.216055] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[   95.368052] ACPI: Preparing to enter system sleep state S3
[   95.880175] Disabling non-boot CPUs ...
[   95.984017] CPU 1 is now offline
[   95.984020] SMP alternatives: switching to UP code
[   95.989495] CPU0 attaching NULL sched-domain.
[   95.989498] CPU1 attaching NULL sched-domain.
[   95.989505] CPU0 attaching NULL sched-domain.
[   95.989646] CPU1 is down
[   95.989683] Extended CMOS year: 2000
comm: file 2 is not in sorted order
[   95.989683] Back to C!
[   95.989683] Extended CMOS year: 2000
[   95.989683] Enabling non-boot CPUs ...
[   95.989683] SMP alternatives: switching to SMP code
[   95.995071] Booting processor 1 APIC 0x1 ip 0x6000
[   95.989374] Initializing CPU#1
[   95.989374] Calibrating delay using timer specific routine.. 5051.44 BogoMIPS (lpj=10102880)
[   95.989374] CPU: L1 I cache: 32K, L1 D cache: 32K
[   95.989374] CPU: L2 cache: 6144K
[   95.989374] CPU 1/0x1 -> Node 0
[   95.989374] CPU: Physical Processor ID: 0
[   95.989374] CPU: Processor Core ID: 1
[   96.084851] CPU1: Intel(R) Core(TM)2 Duo CPU     T9400  @ 2.53GHz stepping 06
[   96.084903] CPU0 attaching NULL sched-domain.
[   96.088513] Switched to high resolution mode on CPU 1
[   96.100020] CPU0 attaching sched-domain:
[   96.100023]  domain 0: span 0-1 level MC
[   96.100024]   groups: 0 1
[   96.100028] CPU1 attaching sched-domain:
[   96.100029]  domain 0: span 0-1 level MC
[   96.100030]   groups: 1 0
[   96.100516] CPU1 is up
[   96.100518] ACPI: Waking up from system sleep state S3
[   97.348118] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[   97.348139] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[   97.348148] heci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[   97.348158] heci 0000:00:03.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006)
[   97.348169] pci 0000:00:03.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[   97.348178] pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00005, writing 0xb00001)
[   97.348189] serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[   97.516049] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[   97.516076] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[   97.516112] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[   97.548055] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[   97.548081] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[   97.548125] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[   97.548144] ehci_hcd 0000:00:1a.7: PME# disabled
[   97.548178] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[   97.548217] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
[   97.548228] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[   97.548281] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
[   97.548292] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[   97.548353] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[   97.548413] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[   97.580054] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[   97.580081] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[   97.580116] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[   97.580151] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[   97.580193] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[   97.580211] ehci_hcd 0000:00:1d.7: PME# disabled
[   97.580321] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[   97.596054] ohci1394 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
[   97.596061] ohci1394 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[   97.612053] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
[   97.612060] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[   97.612117] ricoh-mmc: Resuming.
[   97.612132] ricoh-mmc: Controller is now disabled.
[   97.749792] i915 0000:00:02.0: setting latency timer to 64
[   97.810446] [drm] LVDS-8: set mode 1440x900 c
[   97.830517] pci 0000:00:02.1: PME# disabled
[   97.830532] pci 0000:00:03.2: PME# disabled
[   97.830559] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[   97.830564] e1000e 0000:00:19.0: setting latency timer to 64
[   97.830570] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[   97.830574] e1000e 0000:00:19.0: PME# disabled
[   97.830575] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[   97.830579] e1000e 0000:00:19.0: PME# disabled
[   97.830617] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
[   97.884066] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[   97.884071] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[   97.884093] usb usb3: root hub lost power or was reset
[   97.884111] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[   97.884116] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[   97.884138] usb usb4: root hub lost power or was reset
[   97.884156] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[   97.884162] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[   97.884183] usb usb5: root hub lost power or was reset
[   97.884201] ehci_hcd 0000:00:1a.7: PME# disabled
[   97.884205] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[   97.884211] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[   97.884225] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   97.884230] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   97.884260] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
[   97.884264] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
[   97.884267] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY
[   97.884271] pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY
[   97.884276] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   97.884282] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[   97.884304] usb usb6: root hub lost power or was reset
[   97.884321] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   97.884326] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[   97.884348] usb usb7: root hub lost power or was reset
[   97.884365] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   97.884370] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[   97.884392] usb usb8: root hub lost power or was reset
[   97.884410] ehci_hcd 0000:00:1d.7: PME# disabled
[   97.884413] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[   97.884418] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[   97.884429] pci 0000:00:1e.0: setting latency timer to 64
[   97.884445] ahci 0000:00:1f.2: setting latency timer to 64
[   98.082147] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[f4801000-f48017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[   98.088127] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   98.088130] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   98.089142] pci 0000:15:00.4: PME# disabled
[   98.089146] pci 0000:15:00.5: PME# disabled
[   98.204117] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   98.204142] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   98.214075] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[   98.214497] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[   98.214501] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[   98.214839] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[   98.214843] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[   98.215741] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[   98.218050] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[   98.218053] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[   98.218371] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[   98.218375] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[   98.219642] ata1.00: configured for UDMA/133
[   98.229296] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[   98.230207] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[   98.233899] ata2.00: configured for UDMA/133
[   98.234973] ata1.00: configured for UDMA/133
[   98.234975] ata1: EH complete
[   98.394571] sd 0:0:0:0: [sda] Starting disk
[   98.524132] usb 1-6: reset high speed USB device using ehci_hcd and address 3
[   98.668357] PM: resume devices took 1.056 seconds
[   98.668384] PM: Finishing wakeup.
[   98.668385] Restarting tasks ... done.
[   99.077465] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
[   99.132121] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
[   99.132820] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   99.169398] Registered led device: iwl-phy0::radio
[   99.169420] Registered led device: iwl-phy0::assoc
[   99.169442] Registered led device: iwl-phy0::RX
[   99.169462] Registered led device: iwl-phy0::TX
[   99.247093] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   99.323711] CPU0 attaching NULL sched-domain.
[   99.323716] CPU1 attaching NULL sched-domain.
[   99.328219] CPU0 attaching sched-domain:
[   99.328223]  domain 0: span 0-1 level MC
[   99.328226]   groups: 0 1
[   99.328231] CPU1 attaching sched-domain:
[   99.328234]  domain 0: span 0-1 level MC
[   99.328236]   groups: 1 0
[   99.860123] usb 4-2: new full speed USB device using uhci_hcd and address 3
[  100.026591] usb 4-2: configuration #1 chosen from 1 choice
[  105.814937] wlan0: authenticate with AP 00:12:43:97:3a:90
[  105.816719] wlan0: authenticated
[  105.816726] wlan0: associate with AP 00:12:43:97:3a:90
[  105.820082] wlan0: RX AssocResp from 00:12:43:97:3a:90 (capab=0x421 status=0 aid=171)
[  105.820089] wlan0: associated
[  105.825400] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  116.024109] wlan0: no IPv6 routers present
[  296.561409] CPU0 attaching NULL sched-domain.
[  296.561413] CPU1 attaching NULL sched-domain.
[  296.572682] CPU0 attaching sched-domain:
[  296.572686]  domain 0: span 0-1 level MC
[  296.572690]   groups: 0 1
[  296.572695] CPU1 attaching sched-domain:
[  296.572698]  domain 0: span 0-1 level MC
[  296.572700]   groups: 1 0
[  296.760131] usb 4-2: USB disconnect, address 3
[  296.760805] btusb_intr_complete: hci0 urb ffff8800604f6000 failed to resubmit (19)
[  296.760819] btusb_bulk_complete: hci0 urb ffff88005d0e1b40 failed to resubmit (19)
[  296.761803] btusb_bulk_complete: hci0 urb ffff88005d0e1a80 failed to resubmit (19)
[  296.762010] btusb_send_frame: hci0 urb ffff8800711b6480 submission failed
[  296.899242] wlan0: disassociating by local choice (reason=3)
[  296.900751] wlan0: deauthenticated (Reason: 2)
[  296.944110] wlan0: deauthenticating by local choice (reason=3)
[  297.263349] PM: Syncing filesystems ... done.
[  297.266092] PM: Preparing system for mem sleep
[  297.266096] Freezing user space processes ... (elapsed 0.00 seconds) done.
[  297.266773] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[  297.266805] PM: Entering mem sleep
[  297.266817] Suspending console(s) (use no_console_suspend to debug)
[  297.540114] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  297.540254] sd 0:0:0:0: [sda] Stopping disk
[  299.041471] ACPI handle has no context!
[  299.041477] sdhci-pci 0000:15:00.2: PME# disabled
[  299.041485] sdhci-pci 0000:15:00.2: PCI INT C disabled
[  299.041491] ACPI handle has no context!
[  299.061139] ACPI handle has no context!
[  299.140116] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[  299.140124] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[  299.140131] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[  299.140139] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[  299.140144] pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY
[  299.140148] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY
[  299.140152] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
[  299.140156] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY
[  299.140166] HDA Intel 0000:00:1b.0: PCI INT B disabled
[  299.156112] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[  299.156120] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[  299.156128] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[  299.156135] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[  299.156334] e1000e 0000:00:19.0: PCI INT A disabled
[  299.156338] e1000e 0000:00:19.0: PME# enabled
[  299.156343] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[  299.172136] ACPI handle has no context!
[  299.272156] i915 0000:00:02.0: power state changed by ACPI to D3
[  299.272203] PM: suspend devices took 2.008 seconds
[  299.272323] ricoh-mmc: Suspending.
[  299.272338] ricoh-mmc: Controller is now re-enabled.
[  299.272544] ehci_hcd 0000:00:1d.7: PME# disabled
[  299.320059] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[  299.352055] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[  299.352283] ehci_hcd 0000:00:1a.7: PME# disabled
[  299.400055] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[  299.440058] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3
[  299.544049] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[  299.696052] ACPI: Preparing to enter system sleep state S3
[  300.200177] Disabling non-boot CPUs ...
[  300.304017] CPU 1 is now offline
[  300.304019] SMP alternatives: switching to UP code
[  300.309491] CPU0 attaching NULL sched-domain.
[  300.309494] CPU1 attaching NULL sched-domain.
[  300.309502] CPU0 attaching NULL sched-domain.
[  300.309642] CPU1 is down
[  300.309680] Extended CMOS year: 2000
[  300.309680] Back to C!
[  300.309680] Extended CMOS year: 2000
[  300.309680] Enabling non-boot CPUs ...
[  300.309680] SMP alternatives: switching to SMP code
[  300.315072] Booting processor 1 APIC 0x1 ip 0x6000
[  300.309379] Initializing CPU#1
[  300.309379] Calibrating delay using timer specific routine.. 5051.54 BogoMIPS (lpj=10103098)
[  300.309379] CPU: L1 I cache: 32K, L1 D cache: 32K
[  300.309379] CPU: L2 cache: 6144K
[  300.309379] CPU 1/0x1 -> Node 0
[  300.309379] CPU: Physical Processor ID: 0
[  300.309379] CPU: Processor Core ID: 1
[  300.404851] CPU1: Intel(R) Core(TM)2 Duo CPU     T9400  @ 2.53GHz stepping 06
[  300.404902] CPU0 attaching NULL sched-domain.
[  300.408514] Switched to high resolution mode on CPU 1
[  300.420021] CPU0 attaching sched-domain:
[  300.420023]  domain 0: span 0-1 level MC
[  300.420025]   groups: 0 1
[  300.420028] CPU1 attaching sched-domain:
[  300.420029]  domain 0: span 0-1 level MC
[  300.420031]   groups: 1 0
[  300.420516] CPU1 is up
[  300.420519] ACPI: Waking up from system sleep state S3
[  301.660118] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[  301.660139] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[  301.660149] heci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[  301.660158] heci 0000:00:03.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006)
[  301.660169] pci 0000:00:03.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[  301.660179] pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00005, writing 0xb00001)
[  301.660189] serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[  301.828050] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[  301.828077] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[  301.828113] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[  301.860055] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[  301.860081] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[  301.860124] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[  301.860143] ehci_hcd 0000:00:1a.7: PME# disabled
[  301.860177] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[  301.860224] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[  301.860285] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[  301.860346] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[  301.860407] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[  301.892054] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[  301.892081] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[  301.892116] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[  301.892151] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[  301.892193] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[  301.892212] ehci_hcd 0000:00:1d.7: PME# disabled
[  301.892321] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[  301.892444] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[  301.908054] ohci1394 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
[  301.908061] ohci1394 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[  301.924054] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
[  301.924061] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[  301.924117] ricoh-mmc: Resuming.
[  301.924132] ricoh-mmc: Controller is now disabled.
[  301.999219] i915 0000:00:02.0: setting latency timer to 64
[  302.059926] [drm] LVDS-8: set mode 1440x900 c
[  302.079962] pci 0000:00:02.1: PME# disabled
[  302.079990] pci 0000:00:03.2: PME# disabled
[  302.080024] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[  302.080028] e1000e 0000:00:19.0: setting latency timer to 64
[  302.080033] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[  302.080037] e1000e 0000:00:19.0: PME# disabled
[  302.080038] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[  302.080042] e1000e 0000:00:19.0: PME# disabled
[  302.080079] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
[  302.132067] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[  302.132072] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[  302.132094] usb usb3: root hub lost power or was reset
[  302.132112] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[  302.132117] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[  302.132138] usb usb4: root hub lost power or was reset
[  302.132155] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[  302.132160] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[  302.132182] usb usb5: root hub lost power or was reset
[  302.132199] ehci_hcd 0000:00:1a.7: PME# disabled
[  302.132203] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[  302.132208] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[  302.132228] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[  302.132234] HDA Intel 0000:00:1b.0: setting latency timer to 64
[  302.132247] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
[  302.132251] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
[  302.132255] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY
[  302.132258] pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY
[  302.132263] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  302.132268] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[  302.132289] usb usb6: root hub lost power or was reset
[  302.132305] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[  302.132311] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[  302.132332] usb usb7: root hub lost power or was reset
[  302.132348] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[  302.132353] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[  302.132375] usb usb8: root hub lost power or was reset
[  302.132392] ehci_hcd 0000:00:1d.7: PME# disabled
[  302.132396] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[  302.132401] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[  302.132411] pci 0000:00:1e.0: setting latency timer to 64
[  302.132421] ahci 0000:00:1f.2: setting latency timer to 64
[  302.330129] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[f4801000-f48017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[  302.336176] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[  302.336178] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[  302.337186] pci 0000:15:00.4: PME# disabled
[  302.337190] pci 0000:15:00.5: PME# disabled
[  302.452127] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  302.465705] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[  302.465709] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[  302.466048] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[  302.466051] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[  302.469230] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[  302.469234] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[  302.469556] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[  302.469560] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[  302.470830] ata1.00: configured for UDMA/133
[  302.486979] ata1.00: configured for UDMA/133
[  302.486981] ata1: EH complete
[  302.512116] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  302.528261] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[  302.529926] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[  302.545548] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[  302.546394] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[  302.550092] ata2.00: configured for UDMA/133
[  302.642491] sd 0:0:0:0: [sda] Starting disk
[  302.764129] usb 1-6: reset high speed USB device using ehci_hcd and address 3
[  302.909198] PM: resume devices took 0.984 seconds
[  302.909219] PM: Finishing wakeup.
[  302.909221] Restarting tasks ... done.
[  303.188303] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
[  303.244190] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
[  303.244853] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  303.280538] Registered led device: iwl-phy0::radio
[  303.280594] Registered led device: iwl-phy0::assoc
[  303.280640] Registered led device: iwl-phy0::RX
[  303.280682] Registered led device: iwl-phy0::TX
[  303.356864] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  303.455570] CPU0 attaching NULL sched-domain.
[  303.455576] CPU1 attaching NULL sched-domain.
[  303.468234] CPU0 attaching sched-domain:
[  303.468242]  domain 0: span 0-1 level MC
[  303.468248]   groups: 0 1
[  303.468259] CPU1 attaching sched-domain:
[  303.468264]  domain 0: span 0-1 level MC
[  303.468270]   groups: 1 0
[  303.972120] usb 4-2: new full speed USB device using uhci_hcd and address 4
[  304.139571] usb 4-2: configuration #1 chosen from 1 choice
[  309.982124] wlan0: authenticate with AP 00:12:43:97:3a:90
[  309.983966] wlan0: authenticated
[  309.983972] wlan0: associate with AP 00:12:43:97:3a:90
[  309.985820] wlan0: RX AssocResp from 00:12:43:97:3a:90 (capab=0x421 status=0 aid=174)
[  309.985827] wlan0: associated
[  309.987936] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  320.652112] wlan0: no IPv6 routers present
[  492.420721] wlan0: disassociating by local choice (reason=3)
[  492.422202] wlan0: deauthenticated (Reason: 2)
[  506.928428] wlan0: authenticate with AP 00:12:43:97:3a:30
[  506.930206] wlan0: authenticated
[  506.930213] wlan0: associate with AP 00:12:43:97:3a:30
[  506.932489] wlan0: RX AssocResp from 00:12:43:97:3a:30 (capab=0x421 status=0 aid=130)
[  506.932497] wlan0: associated
[  562.452265] CPU0 attaching NULL sched-domain.
[  562.452271] CPU1 attaching NULL sched-domain.
[  562.472633] CPU0 attaching sched-domain:
[  562.472641]  domain 0: span 0-1 level MC
[  562.472648]   groups: 0 1
[  562.472659] CPU1 attaching sched-domain:
[  562.472664]  domain 0: span 0-1 level MC
[  562.472669]   groups: 1 0
[  562.616118] usb 4-2: USB disconnect, address 4
[  562.616381] btusb_intr_complete: hci0 urb ffff8800598a10c0 failed to resubmit (19)
[  562.616394] btusb_bulk_complete: hci0 urb ffff8800598a1300 failed to resubmit (19)
[  562.617379] btusb_bulk_complete: hci0 urb ffff8800598a1600 failed to resubmit (19)
[  562.617596] btusb_send_frame: hci0 urb ffff8800714a4600 submission failed
[  562.791558] wlan0: disassociating by local choice (reason=3)
[  562.793093] wlan0: deauthenticated (Reason: 2)
[  562.848111] wlan0: deauthenticating by local choice (reason=3)
[  563.351791] PM: Syncing filesystems ... done.
[  563.354538] PM: Preparing system for mem sleep
[  563.354541] Freezing user space processes ... (elapsed 0.00 seconds) done.
[  563.355231] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[  563.355262] PM: Entering mem sleep
[  563.355275] Suspending console(s) (use no_console_suspend to debug)
[  563.628049] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  563.655815] sd 0:0:0:0: [sda] Stopping disk
[  565.153511] ACPI handle has no context!
[  565.153517] sdhci-pci 0000:15:00.2: PME# disabled
[  565.153524] sdhci-pci 0000:15:00.2: PCI INT C disabled
[  565.153530] ACPI handle has no context!
[  565.173137] ACPI handle has no context!
[  565.252115] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[  565.252123] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[  565.252131] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[  565.252138] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[  565.252144] pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY
[  565.252148] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY
[  565.252152] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
[  565.252156] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY
[  565.252166] HDA Intel 0000:00:1b.0: PCI INT B disabled
[  565.268112] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[  565.268120] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[  565.268127] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[  565.268135] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[  565.268334] e1000e 0000:00:19.0: PCI INT A disabled
[  565.268338] e1000e 0000:00:19.0: PME# enabled
[  565.268343] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[  565.284134] ACPI handle has no context!
[  565.364153] i915 0000:00:02.0: power state changed by ACPI to D3
[  565.364201] PM: suspend devices took 2.012 seconds
[  565.364320] ricoh-mmc: Suspending.
[  565.364335] ricoh-mmc: Controller is now re-enabled.
[  565.364539] ehci_hcd 0000:00:1d.7: PME# disabled
[  565.412058] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[  565.444056] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[  565.444283] ehci_hcd 0000:00:1a.7: PME# disabled
[  565.492058] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[  565.524055] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3
[  565.628049] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[  565.772052] ACPI: Preparing to enter system sleep state S3
[  566.292174] Disabling non-boot CPUs ...
[  566.396017] CPU 1 is now offline
[  566.396020] SMP alternatives: switching to UP code
[  566.401493] CPU0 attaching NULL sched-domain.
[  566.401495] CPU1 attaching NULL sched-domain.
[  566.401503] CPU0 attaching NULL sched-domain.
[  566.401639] CPU1 is down
[  566.401676] Extended CMOS year: 2000
[  566.401676] Back to C!
[  566.401676] Extended CMOS year: 2000
[  566.401676] Enabling non-boot CPUs ...
[  566.401676] SMP alternatives: switching to SMP code
[  566.406982] Booting processor 1 APIC 0x1 ip 0x6000
[  566.401372] Initializing CPU#1
[  566.401372] Calibrating delay using timer specific routine.. 5051.46 BogoMIPS (lpj=10102937)
[  566.401372] CPU: L1 I cache: 32K, L1 D cache: 32K
[  566.401372] CPU: L2 cache: 6144K
[  566.401372] CPU 1/0x1 -> Node 0
[  566.401372] CPU: Physical Processor ID: 0
[  566.401372] CPU: Processor Core ID: 1
[  566.496862] CPU1: Intel(R) Core(TM)2 Duo CPU     T9400  @ 2.53GHz stepping 06
[  566.496914] CPU0 attaching NULL sched-domain.
[  566.500514] Switched to high resolution mode on CPU 1
[  566.512020] CPU0 attaching sched-domain:
[  566.512023]  domain 0: span 0-1 level MC
[  566.512025]   groups: 0 1
[  566.512028] CPU1 attaching sched-domain:
[  566.512029]  domain 0: span 0-1 level MC
[  566.512030]   groups: 1 0
[  566.512516] CPU1 is up
[  566.512519] ACPI: Waking up from system sleep state S3
[  567.752118] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[  567.752139] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[  567.752148] heci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[  567.752158] heci 0000:00:03.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006)
[  567.752168] pci 0000:00:03.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[  567.752178] pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00005, writing 0xb00001)
[  567.752189] serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[  567.920050] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[  567.920077] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[  567.920113] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[  567.952054] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[  567.952081] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[  567.952123] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[  567.952142] ehci_hcd 0000:00:1a.7: PME# disabled
[  567.952177] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[  567.952224] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[  567.952284] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[  567.952345] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[  567.952405] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[  567.984054] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[  567.984081] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[  567.984116] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[  567.984151] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[  567.984194] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[  567.984213] ehci_hcd 0000:00:1d.7: PME# disabled
[  567.984322] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[  567.984446] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[  568.000054] ohci1394 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
[  568.000062] ohci1394 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[  568.016053] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
[  568.016060] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[  568.016117] ricoh-mmc: Resuming.
[  568.016132] ricoh-mmc: Controller is now disabled.
[  568.162538] i915 0000:00:02.0: setting latency timer to 64
[  568.223274] [drm] LVDS-8: set mode 1440x900 c
[  568.243382] pci 0000:00:02.1: PME# disabled
[  568.243410] pci 0000:00:03.2: PME# disabled
[  568.243434] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[  568.243438] e1000e 0000:00:19.0: setting latency timer to 64
[  568.243443] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[  568.243447] e1000e 0000:00:19.0: PME# disabled
[  568.243448] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[  568.243452] e1000e 0000:00:19.0: PME# disabled
[  568.243489] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
[  568.296067] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[  568.296073] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[  568.296096] usb usb3: root hub lost power or was reset
[  568.296113] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[  568.296118] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[  568.296139] usb usb4: root hub lost power or was reset
[  568.296156] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[  568.296161] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[  568.296182] usb usb5: root hub lost power or was reset
[  568.296199] ehci_hcd 0000:00:1a.7: PME# disabled
[  568.296203] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[  568.296208] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[  568.296229] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[  568.296235] HDA Intel 0000:00:1b.0: setting latency timer to 64
[  568.296248] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
[  568.296252] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
[  568.296255] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY
[  568.296258] pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY
[  568.296264] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  568.296269] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[  568.296290] usb usb6: root hub lost power or was reset
[  568.296307] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[  568.296312] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[  568.296333] usb usb7: root hub lost power or was reset
[  568.296349] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[  568.296354] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[  568.296376] usb usb8: root hub lost power or was reset
[  568.296394] ehci_hcd 0000:00:1d.7: PME# disabled
[  568.296397] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[  568.296403] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[  568.296413] pci 0000:00:1e.0: setting latency timer to 64
[  568.296423] ahci 0000:00:1f.2: setting latency timer to 64
[  568.494131] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[f4801000-f48017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[  568.500177] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[  568.500179] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[  568.501186] pci 0000:15:00.4: PME# disabled
[  568.501191] pci 0000:15:00.5: PME# disabled
[  568.616127] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  568.620110] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  568.625315] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[  568.625319] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[  568.625658] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[  568.625661] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[  568.628748] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[  568.628788] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[  568.629037] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[  568.629039] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[  568.630254] ata1.00: configured for UDMA/133
[  568.630457] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[  568.632027] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[  568.642547] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[  568.643460] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[  568.646958] ata1.00: configured for UDMA/133
[  568.646960] ata1: EH complete
[  568.647068] ata2.00: configured for UDMA/133
[  568.806350] sd 0:0:0:0: [sda] Starting disk
[  568.936128] usb 1-6: reset high speed USB device using ehci_hcd and address 3
[  569.080860] PM: resume devices took 1.064 seconds
[  569.080882] PM: Finishing wakeup.
[  569.080883] Restarting tasks ... done.
[  569.324232] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
[  569.380069] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
[  569.380351] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  569.412938] Registered led device: iwl-phy0::radio
[  569.412953] Registered led device: iwl-phy0::assoc
[  569.412966] Registered led device: iwl-phy0::RX
[  569.412980] Registered led device: iwl-phy0::TX
[  569.459842] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  569.561912] CPU0 attaching NULL sched-domain.
[  569.561916] CPU1 attaching NULL sched-domain.
[  569.576606] CPU0 attaching sched-domain:
[  569.576610]  domain 0: span 0-1 level MC
[  569.576611]   groups: 0 1
[  569.576616] CPU1 attaching sched-domain:
[  569.576617]  domain 0: span 0-1 level MC
[  569.576619]   groups: 1 0
[  570.072038] usb 4-2: new full speed USB device using uhci_hcd and address 5
[  570.238473] usb 4-2: configuration #1 chosen from 1 choice
[  576.021778] wlan0: authenticate with AP 00:12:43:97:3a:90
[  576.023635] wlan0: authenticated
[  576.023650] wlan0: associate with AP 00:12:43:97:3a:90
[  576.025432] wlan0: RX AssocResp from 00:12:43:97:3a:90 (capab=0x421 status=0 aid=176)
[  576.025439] wlan0: associated
[  576.027556] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  586.136074] wlan0: no IPv6 routers present
[  610.430573] wlan0: disassociating by local choice (reason=3)
[  610.432089] wlan0: deauthenticated (Reason: 2)
[  626.978753] CPU0 attaching NULL sched-domain.
[  626.978757] CPU1 attaching NULL sched-domain.
[  626.996160] CPU0 attaching sched-domain:
[  626.996164]  domain 0: span 0-1 level MC
[  626.996167]   groups: 0 1
[  626.996173] CPU1 attaching sched-domain:
[  626.996176]  domain 0: span 0-1 level MC
[  626.996179]   groups: 1 0
[  686.475493] wlan0: authenticate with AP 00:12:43:97:3a:90
[  686.477255] wlan0: authenticated
[  686.477263] wlan0: associate with AP 00:12:43:97:3a:90
[  686.479115] wlan0: RX AssocResp from 00:12:43:97:3a:90 (capab=0x421 status=0 aid=178)
[  686.479123] wlan0: associated