Error: command ['sh', '-c', 'dmesg | comm -13 /var/log/dmesg -'] failed with exit code 1: [   28.348040] vmnet8: no IPv6 routers present
[   28.376025] vmnet1: no IPv6 routers present
comm: file 2 is not in sorted order
[  124.704732] [drm] LVDS-8: set mode  f
[  141.899841] wlan0: authenticate with AP 00:21:91:ea:aa:89
[  141.901682] wlan0: authenticated
[  141.901685] wlan0: associate with AP 00:21:91:ea:aa:89
[  141.904236] wlan0: RX AssocResp from 00:21:91:ea:aa:89 (capab=0x431 status=0 aid=2)
[  141.904240] wlan0: associated
[  141.924558] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  145.014175] padlock: VIA PadLock not detected.
[  145.152045] /dev/vmnet: open called by PID 2389 (vmnet-bridge)
[  145.152060] /dev/vmnet: hub 0 does not exist, allocating memory.
[  145.152075] /dev/vmnet: port on hub 0 successfully opened
[  145.152086] bridge-wlan0: is a Wireless Adapter
[  145.152091] bridge-wlan0: up
[  145.152095] bridge-wlan0: attached
[  152.096064] wlan0: no IPv6 routers present
[  199.048080] CE: hpet increasing min_delta_ns to 15000 nsec
[ 2151.222027] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 2151.261879] ISO 9660 Extensions: RRIP_1991A
[ 2160.080111] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 2161.007088] usb 1-3: configuration #1 chosen from 1 choice
[ 2161.068117] Initializing USB Mass Storage driver...
[ 2161.068454] scsi5 : SCSI emulation for USB Mass Storage devices
[ 2161.068681] usbcore: registered new interface driver usb-storage
[ 2161.068688] usb-storage: device found at 3
[ 2161.068690] usb-storage: waiting for device to settle before scanning
[ 2161.068722] USB Mass Storage support registered.
[ 2166.069332] usb-storage: device scan complete
[ 2166.070466] scsi 5:0:0:0: Direct-Access     Lexar    JD FireFly       1100 PQ: 0 ANSI: 0 CCS
[ 2166.072169] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 2166.073664] sd 5:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 2166.080936] sd 5:0:0:0: [sdb] Write Protect is off
[ 2166.080942] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 2166.080946] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 2166.086037] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 2166.086045]  sdb: sdb1
[ 2166.112819] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 2166.112830] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 2328.765876] /dev/vmmon[5243]: PTSC: initialized at 1595469000 Hz using reference clock
[ 2330.652858] /dev/vmnet: open called by PID 5246 (vmware-vmx)
[ 2330.652887] /dev/vmnet: port on hub 8 successfully opened
[ 2398.328133] usb 3-1: reset full speed USB device using uhci_hcd and address 2
[ 2399.384099] usb 3-1: reset full speed USB device using uhci_hcd and address 2
[ 2441.068105] usb 1-3: USB disconnect, address 3
[ 2447.664379] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 2448.651132] usb 1-3: configuration #1 chosen from 1 choice
[ 2448.652250] scsi6 : SCSI emulation for USB Mass Storage devices
[ 2448.652508] usb-storage: device found at 4
[ 2448.652513] usb-storage: waiting for device to settle before scanning
[ 2453.653274] usb-storage: device scan complete
[ 2453.654381] scsi 6:0:0:0: Direct-Access     Lexar    JD FireFly       1100 PQ: 0 ANSI: 0 CCS
[ 2453.655283] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 2453.662532] sd 6:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 2453.665684] sd 6:0:0:0: [sdb] Write Protect is off
[ 2453.665688] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 2453.665691] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2453.670929] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2453.670935]  sdb: sdb1
[ 2453.698321] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2453.698332] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 2487.744857] usb 1-3: USB disconnect, address 4
[ 2487.746996] FAT: bread failed in fat_clusters_flush
[ 2487.755211] FAT: bread failed in fat_clusters_flush
[ 2487.755345] FAT: bread failed in fat_clusters_flush
[ 2487.762376] FAT: bread failed in fat_clusters_flush
[ 2512.359915] /dev/vmnet: open called by PID 5243 (vmware-vmx)
[ 2512.359930] /dev/vmnet: port on hub 8 successfully opened
[ 2529.916078] usb 1-3: new high speed USB device using ehci_hcd and address 5
[ 2530.919058] usb 1-3: configuration #1 chosen from 1 choice
[ 2530.920169] scsi7 : SCSI emulation for USB Mass Storage devices
[ 2530.920380] usb-storage: device found at 5
[ 2530.920386] usb-storage: waiting for device to settle before scanning
[ 2531.440045] usb 3-1: reset full speed USB device using uhci_hcd and address 2
[ 2532.081080] usb 3-1: reset full speed USB device using uhci_hcd and address 2
[ 2535.921334] usb-storage: device scan complete
[ 2535.922380] scsi 7:0:0:0: Direct-Access     Lexar    JD FireFly       1100 PQ: 0 ANSI: 0 CCS
[ 2535.922848] sd 7:0:0:0: Attached scsi generic sg1 type 0
[ 2535.929364] sd 7:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 2535.932481] sd 7:0:0:0: [sdb] Write Protect is off
[ 2535.932485] sd 7:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 2535.932488] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 2535.938436] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 2535.938442]  sdb: sdb1
[ 2535.967236] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 2535.967243] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 2558.813339] FAT: bread failed in fat_clusters_flush
[ 2558.818117] FAT: bread failed in fat_clusters_flush
[ 2558.820974] FAT: bread failed in fat_clusters_flush
[ 2558.821006] FAT: bread failed in fat_clusters_flush
[ 2559.144078] usb 1-3: reset high speed USB device using ehci_hcd and address 5
[ 2559.277279] scsi8 : SCSI emulation for USB Mass Storage devices
[ 2559.279161] usb-storage: device found at 5
[ 2559.279167] usb-storage: waiting for device to settle before scanning
[ 2559.508102] usb 1-3: reset high speed USB device using ehci_hcd and address 5
[ 2559.833198] usb 1-3: usbfs: interface 0 claimed by usb-storage while 'vmware-vmx' sets config #1
[ 2559.833341] usb 1-3: usbfs: interface 0 claimed by usb-storage while 'vmware-vmx' sets config #1
[ 2564.276353] usb-storage: device scan complete
[ 2564.277053] scsi 8:0:0:0: Direct-Access     Lexar    JD FireFly       1100 PQ: 0 ANSI: 0 CCS
[ 2564.278637] sd 8:0:0:0: Attached scsi generic sg1 type 0
[ 2564.284758] sd 8:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 2564.287570] sd 8:0:0:0: [sdb] Write Protect is off
[ 2564.287579] sd 8:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 2564.287585] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 2564.293306] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 2564.293317]  sdb: sdb1
[ 2564.301006] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 2564.301017] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 2569.431723] FAT: bread failed in fat_clusters_flush
[ 2569.432044] FAT: bread failed in fat_clusters_flush
[ 2569.436252] FAT: bread failed in fat_clusters_flush
[ 2569.449726] FAT: bread failed in fat_clusters_flush
[ 2569.449753] FAT: bread failed in fat_clusters_flush
[ 2575.826307] usb 1-3: USB disconnect, address 5
[ 2597.656144] usb 1-3: new high speed USB device using ehci_hcd and address 6
[ 2602.776053] usb 1-3: device descriptor read/64, error -71
[ 2603.114727] usb 1-3: configuration #1 chosen from 1 choice
[ 2603.115726] scsi9 : SCSI emulation for USB Mass Storage devices
[ 2603.115986] usb-storage: device found at 6
[ 2603.115991] usb-storage: waiting for device to settle before scanning
[ 2608.113279] usb-storage: device scan complete
[ 2608.113956] scsi 9:0:0:0: Direct-Access     JetFlash Transcend 8GB    8.07 PQ: 0 ANSI: 2
[ 2608.114830] sd 9:0:0:0: Attached scsi generic sg1 type 0
[ 2608.122573] sd 9:0:0:0: [sdb] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB)
[ 2608.124572] sd 9:0:0:0: [sdb] Write Protect is off
[ 2608.124576] sd 9:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 2608.124580] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 2608.128201] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 2608.128206]  sdb: sdb1
[ 2608.594056] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 2608.594068] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[ 2610.469818] FAT: FAT read failed (blocknr 4145)
[ 2610.477085] FAT: bread failed in fat_clusters_flush
[ 2610.481431] FAT: bread failed in fat_clusters_flush
[ 2610.481462] FAT: bread failed in fat_clusters_flush
[ 2610.489176] FAT: bread failed in fat_clusters_flush
[ 2610.724165] usb 1-3: reset high speed USB device using ehci_hcd and address 6
[ 2611.069420] scsi10 : SCSI emulation for USB Mass Storage devices
[ 2611.069986] usb-storage: device found at 6
[ 2611.069989] usb-storage: waiting for device to settle before scanning
[ 2611.296098] usb 1-3: reset high speed USB device using ehci_hcd and address 6
[ 2611.824226] usb 1-3: usbfs: interface 0 claimed by usb-storage while 'vmware-vmx' sets config #1
[ 2728.440069] scsi11 : SCSI emulation for USB Mass Storage devices
[ 2728.448559] usb-storage: device found at 6
[ 2728.448566] usb-storage: waiting for device to settle before scanning
[ 2728.708345] vmmon: Had to deallocate locked 78750 pages from vm driver f3b94200
[ 2728.710234] vmmon: Had to deallocate AWE 5748 pages from vm driver f3b94200
[ 2733.444344] usb-storage: device scan complete
[ 2733.445135] scsi 11:0:0:0: Direct-Access     JetFlash Transcend 8GB    8.07 PQ: 0 ANSI: 2
[ 2733.450722] sd 11:0:0:0: Attached scsi generic sg1 type 0
[ 2733.451341] sd 11:0:0:0: [sdb] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB)
[ 2733.453321] sd 11:0:0:0: [sdb] Write Protect is off
[ 2733.453329] sd 11:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 2733.453335] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[ 2733.457586] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[ 2733.457596]  sdb: sdb1
[ 2733.461817] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[ 2733.461822] sd 11:0:0:0: [sdb] Attached SCSI removable disk
[ 2808.141354] /dev/vmmon[6088]: PTSC: initialized at 1595469000 Hz using reference clock
[ 2814.608088] FAT: bread failed in fat_clusters_flush
[ 2814.623718] FAT: bread failed in fat_clusters_flush
[ 2814.628945] FAT: bread failed in fat_clusters_flush
[ 2814.628979] FAT: bread failed in fat_clusters_flush
[ 2815.237210] /dev/vmnet: open called by PID 6091 (vmware-vmx)
[ 2815.237241] /dev/vmnet: port on hub 8 successfully opened
[ 2824.688087] usb 1-3: reset high speed USB device using ehci_hcd and address 6
[ 2825.026534] scsi12 : SCSI emulation for USB Mass Storage devices
[ 2825.044902] usb-storage: device found at 6
[ 2825.044906] usb-storage: waiting for device to settle before scanning
[ 2825.308482] usb 1-3: reset high speed USB device using ehci_hcd and address 6
[ 2825.883158] usb 1-3: usbfs: interface 0 claimed by usb-storage while 'vmware-vmx' sets config #1
[ 2825.883254] usb 1-3: usbfs: interface 0 claimed by usb-storage while 'vmware-vmx' sets config #1
[ 2830.041378] usb-storage: device scan complete
[ 2830.042094] scsi 12:0:0:0: Direct-Access     JetFlash Transcend 8GB    8.07 PQ: 0 ANSI: 2
[ 2830.042564] sd 12:0:0:0: Attached scsi generic sg1 type 0
[ 2830.057874] sd 12:0:0:0: [sdb] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB)
[ 2830.059949] sd 12:0:0:0: [sdb] Write Protect is off
[ 2830.059953] sd 12:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 2830.059956] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[ 2830.064466] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[ 2830.064472]  sdb: sdb1
[ 2830.524876] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[ 2830.524887] sd 12:0:0:0: [sdb] Attached SCSI removable disk
[ 2840.667751] FAT: bread failed in fat_clusters_flush
[ 2840.679638] FAT: bread failed in fat_clusters_flush
[ 2840.681167] FAT: bread failed in fat_clusters_flush
[ 2840.681192] FAT: bread failed in fat_clusters_flush
[ 2840.812050] usb 3-1: reset full speed USB device using uhci_hcd and address 2
[ 2841.604102] usb 3-1: reset full speed USB device using uhci_hcd and address 2
[ 3567.464917] CE: hpet increasing min_delta_ns to 22500 nsec
[ 4172.016363] pulseaudio[6039]: segfault at 8 ip 00c4f179 sp bfcadaf8 error 4 in libc-2.10.1.so[be4000+151000]
[ 5172.863708] Monitor-Mwait will be used to enter C-3 state
[ 8375.649470] usb 1-3: USB disconnect, address 6
[ 9351.604080] usb 1-3: new high speed USB device using ehci_hcd and address 7
[ 9356.724163] usb 1-3: device descriptor read/64, error -71
[ 9357.062874] usb 1-3: configuration #1 chosen from 1 choice
[ 9357.063850] scsi13 : SCSI emulation for USB Mass Storage devices
[ 9357.064217] usb-storage: device found at 7
[ 9357.064222] usb-storage: waiting for device to settle before scanning
[ 9362.065304] usb-storage: device scan complete
[ 9362.066135] scsi 13:0:0:0: Direct-Access     JetFlash Transcend 8GB    8.07 PQ: 0 ANSI: 2
[ 9362.069564] sd 13:0:0:0: Attached scsi generic sg1 type 0
[ 9362.070595] sd 13:0:0:0: [sdb] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB)
[ 9362.072604] sd 13:0:0:0: [sdb] Write Protect is off
[ 9362.072611] sd 13:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 9362.072617] sd 13:0:0:0: [sdb] Assuming drive cache: write through
[ 9362.076203] sd 13:0:0:0: [sdb] Assuming drive cache: write through
[ 9362.076213]  sdb: sdb1
[ 9362.393940] sd 13:0:0:0: [sdb] Assuming drive cache: write through
[ 9362.393946] sd 13:0:0:0: [sdb] Attached SCSI removable disk
[ 9366.627230] FAT: bread failed in fat_clusters_flush
[ 9366.701942] FAT: bread failed in fat_clusters_flush
[ 9366.701958] FAT: bread failed in fat_clusters_flush
[ 9366.701969] FAT: bread failed in fat_clusters_flush
[ 9366.876058] usb 1-3: reset high speed USB device using ehci_hcd and address 7
[ 9367.213647] scsi14 : SCSI emulation for USB Mass Storage devices
[ 9367.214586] usb-storage: device found at 7
[ 9367.214592] usb-storage: waiting for device to settle before scanning
[ 9367.440873] usb 1-3: reset high speed USB device using ehci_hcd and address 7
[ 9368.013210] usb 1-3: usbfs: interface 0 claimed by usb-storage while 'vmware-vmx' sets config #1
[ 9404.981106] scsi15 : SCSI emulation for USB Mass Storage devices
[ 9404.982130] usb-storage: device found at 7
[ 9404.982133] usb-storage: waiting for device to settle before scanning
[ 9407.346327] vmmon: Had to deallocate locked 132079 pages from vm driver f3c59400
[ 9407.349354] vmmon: Had to deallocate AWE 5097 pages from vm driver f3c59400
[ 9409.980275] usb-storage: device scan complete
[ 9409.981024] scsi 15:0:0:0: Direct-Access     JetFlash Transcend 8GB    8.07 PQ: 0 ANSI: 2
[ 9409.981893] sd 15:0:0:0: Attached scsi generic sg1 type 0
[ 9410.006034] sd 15:0:0:0: [sdb] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB)
[ 9410.008217] sd 15:0:0:0: [sdb] Write Protect is off
[ 9410.008220] sd 15:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 9410.008223] sd 15:0:0:0: [sdb] Assuming drive cache: write through
[ 9410.012089] sd 15:0:0:0: [sdb] Assuming drive cache: write through
[ 9410.012093]  sdb: sdb1
[ 9410.020328] sd 15:0:0:0: [sdb] Assuming drive cache: write through
[ 9410.020336] sd 15:0:0:0: [sdb] Attached SCSI removable disk
[ 9413.943078] /dev/vmmon[7238]: PTSC: initialized at 1595469000 Hz using reference clock
[ 9416.701288] FAT: bread failed in fat_clusters_flush
[ 9416.714839] FAT: bread failed in fat_clusters_flush
[ 9416.714870] FAT: bread failed in fat_clusters_flush
[ 9416.714882] FAT: bread failed in fat_clusters_flush
[ 9417.169853] /dev/vmnet: open called by PID 7241 (vmware-vmx)
[ 9417.169883] /dev/vmnet: port on hub 8 successfully opened
[ 9430.500067] Clocksource tsc unstable (delta = -62665321 ns)
[ 9492.304083] vmmon: Had to deallocate locked 4408 pages from vm driver f281dc00
[ 9492.305284] vmmon: Had to deallocate AWE 2633 pages from vm driver f281dc00
[ 9496.324992] /dev/vmmon[7255]: PTSC: initialized at 1595469000 Hz using reference clock
[ 9497.521438] /dev/vmnet: open called by PID 7258 (vmware-vmx)
[ 9497.521457] /dev/vmnet: port on hub 8 successfully opened
[ 9507.924073] usb 1-3: reset high speed USB device using ehci_hcd and address 7
[ 9508.261509] scsi16 : SCSI emulation for USB Mass Storage devices
[ 9508.307386] usb-storage: device found at 7
[ 9508.307390] usb-storage: waiting for device to settle before scanning
[ 9508.560094] usb 1-3: reset high speed USB device using ehci_hcd and address 7
[ 9509.126600] usb 1-3: usbfs: interface 0 claimed by usb-storage while 'vmware-vmx' sets config #1
[ 9509.126685] usb 1-3: usbfs: interface 0 claimed by usb-storage while 'vmware-vmx' sets config #1
[ 9513.304345] usb-storage: device scan complete
[ 9513.305171] scsi 16:0:0:0: Direct-Access     JetFlash Transcend 8GB    8.07 PQ: 0 ANSI: 2
[ 9513.308343] sd 16:0:0:0: Attached scsi generic sg1 type 0
[ 9513.309744] sd 16:0:0:0: [sdb] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB)
[ 9513.311745] sd 16:0:0:0: [sdb] Write Protect is off
[ 9513.311753] sd 16:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 9513.311759] sd 16:0:0:0: [sdb] Assuming drive cache: write through
[ 9513.315827] sd 16:0:0:0: [sdb] Assuming drive cache: write through
[ 9513.315839]  sdb: sdb1
[ 9513.630988] sd 16:0:0:0: [sdb] Assuming drive cache: write through
[ 9513.630999] sd 16:0:0:0: [sdb] Attached SCSI removable disk
[ 9518.728213] FAT: bread failed in fat_clusters_flush
[ 9518.803014] FAT: bread failed in fat_clusters_flush
[ 9518.803031] FAT: bread failed in fat_clusters_flush
[ 9518.803041] FAT: bread failed in fat_clusters_flush
[ 9518.889042] usb 3-1: reset full speed USB device using uhci_hcd and address 2
[ 9519.828526] usb 3-1: reset full speed USB device using uhci_hcd and address 2
[ 9542.128605] scsi17 : SCSI emulation for USB Mass Storage devices
[ 9542.185512] usb-storage: device found at 7
[ 9542.185516] usb-storage: waiting for device to settle before scanning
[ 9542.266963] vmmon: Had to deallocate locked 24668 pages from vm driver f3f05800
[ 9542.268274] vmmon: Had to deallocate AWE 3151 pages from vm driver f3f05800
[ 9547.184269] usb-storage: device scan complete
[ 9547.185040] scsi 17:0:0:0: Direct-Access     JetFlash Transcend 8GB    8.07 PQ: 0 ANSI: 2
[ 9547.185494] sd 17:0:0:0: Attached scsi generic sg1 type 0
[ 9547.186340] sd 17:0:0:0: [sdb] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB)
[ 9547.188424] sd 17:0:0:0: [sdb] Write Protect is off
[ 9547.188429] sd 17:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 9547.188432] sd 17:0:0:0: [sdb] Assuming drive cache: write through
[ 9547.192733] sd 17:0:0:0: [sdb] Assuming drive cache: write through
[ 9547.192739]  sdb: sdb1
[ 9547.196958] sd 17:0:0:0: [sdb] Assuming drive cache: write through
[ 9547.196965] sd 17:0:0:0: [sdb] Attached SCSI removable disk
[ 9918.857439] usb 1-3: USB disconnect, address 7
[30589.576100] usb 1-3: new high speed USB device using ehci_hcd and address 8
[30589.709185] usb 1-3: configuration #1 chosen from 1 choice
[30589.709723] scsi18 : SCSI emulation for USB Mass Storage devices
[30589.710065] usb-storage: device found at 8
[30589.710070] usb-storage: waiting for device to settle before scanning
[30594.708400] usb-storage: device scan complete
[30594.708962] scsi 18:0:0:0: Direct-Access              Flash Disk       5.00 PQ: 0 ANSI: 2
[30594.710298] sd 18:0:0:0: Attached scsi generic sg1 type 0
[30594.720533] sd 18:0:0:0: [sdb] 2009088 512-byte logical blocks: (1.02 GB/981 MiB)
[30594.721771] sd 18:0:0:0: [sdb] Write Protect is off
[30594.721780] sd 18:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[30594.721786] sd 18:0:0:0: [sdb] Assuming drive cache: write through
[30594.725284] sd 18:0:0:0: [sdb] Assuming drive cache: write through
[30594.725295]  sdb: sdb1
[30594.730273] sd 18:0:0:0: [sdb] Assuming drive cache: write through
[30594.730284] sd 18:0:0:0: [sdb] Attached SCSI removable disk
[30606.113453] usb 1-3: USB disconnect, address 8
[30606.115523] FAT: bread failed in fat_clusters_flush
[30606.123676] FAT: bread failed in fat_clusters_flush
[30606.176337] FAT: bread failed in fat_clusters_flush
[30606.176355] FAT: bread failed in fat_clusters_flush
[80035.020105] wlan0: no probe response from AP 00:21:91:ea:aa:89 - disassociating
[80035.029684] bridge-wlan0: disabling the bridge
[80035.041100] bridge-wlan0: down
[80035.041239] bridge-wlan0: detached
[80050.149863] wlan0: authenticate with AP 00:21:91:ea:aa:89
[80050.151821] wlan0: authenticated
[80050.151827] wlan0: associate with AP 00:21:91:ea:aa:89
[80050.154401] wlan0: RX ReassocResp from 00:21:91:ea:aa:89 (capab=0x431 status=0 aid=1)
[80050.154405] wlan0: associated
[80050.762570] wlan0: disassociating by local choice (reason=3)
[80050.764367] wlan0: deauthenticated (Reason: 1)
[80062.645098] wlan0: authenticate with AP 00:21:91:ea:aa:89
[80062.646882] wlan0: authenticated
[80062.646890] wlan0: associate with AP 00:21:91:ea:aa:89
[80062.649456] wlan0: RX AssocResp from 00:21:91:ea:aa:89 (capab=0x431 status=0 aid=1)
[80062.649460] wlan0: associated
[80065.653115] /dev/vmnet: open called by PID 2389 (vmnet-bridge)
[80065.653138] /dev/vmnet: hub 0 does not exist, allocating memory.
[80065.653169] /dev/vmnet: port on hub 0 successfully opened
[80065.653191] bridge-wlan0: is a Wireless Adapter
[80065.653199] bridge-wlan0: up
[80065.653207] bridge-wlan0: attached
[80071.681040] /dev/vmmon[0]: HostIF_ReadUptime: detected settimeofday: fixed uptimeBase old 18445494156870427413 new 18445494156868073901 attempts 1
[97640.453064] wlan0: no probe response from AP 00:21:91:ea:aa:89 - disassociating
[97640.465715] bridge-wlan0: disabling the bridge
[97640.477066] bridge-wlan0: down
[97640.477187] bridge-wlan0: detached
[97661.223528] cfg80211: Found new beacon on frequency: 5220 MHz (Ch 44) on phy0
[97662.400061] wlan0: authenticate with AP 00:21:91:ea:aa:89
[97662.408952] wlan0: authenticate with AP 00:21:91:ea:aa:89
[97662.416343] wlan0: authenticated
[97662.416349] wlan0: associate with AP 00:21:91:ea:aa:89
[97662.418962] wlan0: RX ReassocResp from 00:21:91:ea:aa:89 (capab=0x431 status=0 aid=2)
[97662.418968] wlan0: associated
[97665.422019] /dev/vmnet: open called by PID 2389 (vmnet-bridge)
[97665.422044] /dev/vmnet: hub 0 does not exist, allocating memory.
[97665.422075] /dev/vmnet: port on hub 0 successfully opened
[97665.422094] bridge-wlan0: is a Wireless Adapter
[97665.422102] bridge-wlan0: up
[97665.422108] bridge-wlan0: attached
[139175.445245] CE: hpet increasing min_delta_ns to 33750 nsec
[163375.517171] /dev/vmmon[31039]: PTSC: initialized at 1595469000 Hz using reference clock
[163377.245955] /dev/vmnet: open called by PID 31042 (vmware-vmx)
[163377.245974] /dev/vmnet: port on hub 8 successfully opened
[163609.900055] vmmon: Had to deallocate locked 80373 pages from vm driver f47d9400
[163609.903524] vmmon: Had to deallocate AWE 6367 pages from vm driver f47d9400
[163648.407338] /dev/vmmon[348]: PTSC: initialized at 1595469000 Hz using reference clock
[163649.990520] /dev/vmnet: open called by PID 351 (vmware-vmx)
[163649.990539] /dev/vmnet: port on hub 8 successfully opened
[164580.886314] vmmon: Had to deallocate locked 88428 pages from vm driver f2a63600
[164580.890316] vmmon: Had to deallocate AWE 8003 pages from vm driver f2a63600
[164658.152016] /dev/vmmon[6187]: PTSC: initialized at 1595469000 Hz using reference clock
[164663.410832] /dev/vmnet: open called by PID 6190 (vmware-vmx)
[164663.410850] /dev/vmnet: port on hub 8 successfully opened
[164667.929716] vmmon: Had to deallocate locked 2865 pages from vm driver ce3dae00
[164667.930530] vmmon: Had to deallocate AWE 1845 pages from vm driver ce3dae00
[164682.127559] /dev/vmmon[6201]: PTSC: initialized at 1595469000 Hz using reference clock
[164684.102665] /dev/vmnet: open called by PID 6204 (vmware-vmx)
[164684.102684] /dev/vmnet: port on hub 8 successfully opened
[164802.123026] vmmon: Had to deallocate locked 91137 pages from vm driver f2881400
[164802.125870] vmmon: Had to deallocate AWE 4201 pages from vm driver f2881400
[164806.425621] /dev/vmmon[6231]: PTSC: initialized at 1595469000 Hz using reference clock
[164807.898819] /dev/vmnet: open called by PID 6234 (vmware-vmx)
[164807.898836] /dev/vmnet: port on hub 8 successfully opened
[165714.404100] usb 1-3: new high speed USB device using ehci_hcd and address 9
[165715.291026] usb 1-3: configuration #1 chosen from 1 choice
[165715.291535] scsi19 : SCSI emulation for USB Mass Storage devices
[165715.291881] usb-storage: device found at 9
[165715.291886] usb-storage: waiting for device to settle before scanning
[165720.288290] usb-storage: device scan complete
[165720.289445] scsi 19:0:0:0: Direct-Access     Lexar    JD FireFly       1100 PQ: 0 ANSI: 0 CCS
[165720.292983] sd 19:0:0:0: Attached scsi generic sg1 type 0
[165720.294377] sd 19:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
[165720.297481] sd 19:0:0:0: [sdb] Write Protect is off
[165720.297489] sd 19:0:0:0: [sdb] Mode Sense: 43 00 00 00
[165720.297495] sd 19:0:0:0: [sdb] Assuming drive cache: write through
[165720.304238] sd 19:0:0:0: [sdb] Assuming drive cache: write through
[165720.304248]  sdb: sdb1
[165720.331594] sd 19:0:0:0: [sdb] Assuming drive cache: write through
[165720.331603] sd 19:0:0:0: [sdb] Attached SCSI removable disk
[165796.856756] vmmon: Had to deallocate locked 91380 pages from vm driver f4712e00
[165796.863723] vmmon: Had to deallocate AWE 6107 pages from vm driver f4712e00
[165845.213943] /dev/vmmon[9484]: PTSC: initialized at 1595469000 Hz using reference clock
[165846.714422] /dev/vmnet: open called by PID 9487 (vmware-vmx)
[165846.714442] /dev/vmnet: port on hub 8 successfully opened
[166309.641711] usb 1-3: USB disconnect, address 9
[166309.642890] FAT: bread failed in fat_clusters_flush
[166309.691005] FAT: bread failed in fat_clusters_flush
[166309.691020] FAT: bread failed in fat_clusters_flush
[166309.691030] FAT: bread failed in fat_clusters_flush
[166890.299713] vmmon: Had to deallocate locked 112413 pages from vm driver e70e7200
[166890.303082] vmmon: Had to deallocate AWE 5864 pages from vm driver e70e7200
[169843.324111] usb 1-3: new high speed USB device using ehci_hcd and address 10
[169848.444077] usb 1-3: device descriptor read/64, error -71
[169848.782760] usb 1-3: configuration #1 chosen from 1 choice
[169848.786077] scsi20 : SCSI emulation for USB Mass Storage devices
[169848.786386] usb-storage: device found at 10
[169848.786391] usb-storage: waiting for device to settle before scanning
[169853.784306] usb-storage: device scan complete
[169853.785338] scsi 20:0:0:0: Direct-Access     JetFlash Transcend 8GB    8.07 PQ: 0 ANSI: 2
[169853.786224] sd 20:0:0:0: Attached scsi generic sg1 type 0
[169853.795710] sd 20:0:0:0: [sdb] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB)
[169853.797705] sd 20:0:0:0: [sdb] Write Protect is off
[169853.797713] sd 20:0:0:0: [sdb] Mode Sense: 03 00 00 00
[169853.797720] sd 20:0:0:0: [sdb] Assuming drive cache: write through
[169853.801833] sd 20:0:0:0: [sdb] Assuming drive cache: write through
[169853.801844]  sdb: sdb1
[169853.906861] sd 20:0:0:0: [sdb] Assuming drive cache: write through
[169853.906871] sd 20:0:0:0: [sdb] Attached SCSI removable disk
[174693.281335] pulseaudio[9016]: segfault at 0 ip (null) sp bfb1f6dc error 4 in libwrap.so.0.7.6[110000+7000]
[178007.457150] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x012f0c00
[183352.917221] usb 1-3: USB disconnect, address 10
[196419.617504] pulseaudio[1188]: segfault at 28 ip 00426a26 sp bfd2b580 error 4 in libalsa-util.so[401000+2f000]
[196455.833844] CE: hpet increasing min_delta_ns to 50624 nsec
[210622.297902] pulseaudio[29822]: segfault at 6573657e ip 004f5170 sp bfdbda94 error 4 in libc-2.10.1.so[48a000+151000]
[212367.476886] pulseaudio[30374]: segfault at 8 ip 00eac179 sp b7fabc74 error 4 in libc-2.10.1.so[e41000+151000]
[226723.770295] [drm] LVDS-8: set mode 1400x1050 c
[226727.170062] [drm] LVDS-8: set mode  16
[226774.413051] wlan0: deauthenticating by local choice (reason=3)
[226774.429063] iwlagn 0000:03:00.0: Error sending REPLY_ADD_STA: enqueue_hcmd failed: -5
[226774.429075] mac80211-phy0: failed to remove key (0, 00:21:91:ea:aa:89) from hardware (-5)
[226774.453055] iwlagn 0000:03:00.0: Error sending REPLY_ADD_STA: enqueue_hcmd failed: -5
[226774.453064] mac80211-phy0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-5)
[226774.501649] bridge-wlan0: disabling the bridge
[226774.517035] bridge-wlan0: down
[226774.517107] bridge-wlan0: detached
[226774.592124] usb 6-1: USB disconnect, address 2
[226774.592552] sierra ttyUSB0: Sierra USB modem converter now disconnected from ttyUSB0
[226774.592702] sierra ttyUSB1: Sierra USB modem converter now disconnected from ttyUSB1
[226774.592847] sierra ttyUSB2: Sierra USB modem converter now disconnected from ttyUSB2
[226774.592888] sierra 6-1:1.0: device disconnected
[226778.900713] Registered led device: iwl-phy0::radio
[226778.900760] Registered led device: iwl-phy0::assoc
[226778.900804] Registered led device: iwl-phy0::RX
[226778.900845] Registered led device: iwl-phy0::TX
[226778.931381] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[226780.572059] usb 6-1: new full speed USB device using uhci_hcd and address 3
[226780.731299] usb 6-1: configuration #1 chosen from 1 choice
[226780.737195] sierra 6-1:1.0: Sierra USB modem converter detected
[226780.738240] usb 6-1: Sierra USB modem converter now attached to ttyUSB0
[226780.738338] usb 6-1: Sierra USB modem converter now attached to ttyUSB1
[226780.738437] usb 6-1: Sierra USB modem converter now attached to ttyUSB2
[226784.227894] wlan0: authenticate with AP 00:21:91:ea:aa:89
[226784.229668] wlan0: authenticated
[226784.229674] wlan0: associate with AP 00:21:91:ea:aa:89
[226784.232311] wlan0: RX AssocResp from 00:21:91:ea:aa:89 (capab=0x431 status=0 aid=2)
[226784.232318] wlan0: associated
[226784.252813] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[226787.241531] /dev/vmnet: open called by PID 2389 (vmnet-bridge)
[226787.241553] /dev/vmnet: hub 0 does not exist, allocating memory.
[226787.241583] /dev/vmnet: port on hub 0 successfully opened
[226787.241603] bridge-wlan0: is a Wireless Adapter
[226787.241612] bridge-wlan0: up
[226787.241620] bridge-wlan0: attached
[226794.681024] /dev/vmmon[0]: HostIF_ReadUptime: detected settimeofday: fixed uptimeBase old 18445494156868073901 new 18445494156864171329 attempts 1
[226795.184052] wlan0: no IPv6 routers present
[226818.379566] [drm] LVDS-8: set mode 1400x1050 c