Dumping 113 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
  info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
  info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list)
  info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list)
  info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement'} (string list)
  info.product = 'Computer'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer'  (string)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
  power_management.acpi.linux.version = '20080926'  (string)
  power_management.can_hibernate = true  (bool)
  power_management.can_suspend = true  (bool)
  power_management.can_suspend_hybrid = false  (bool)
  power_management.is_powersave_set = false  (bool)
  power_management.quirk.dpms_on = true  (bool)
  power_management.quirk.dpms_suspend = true  (bool)
  power_management.quirk.vbe_post = true  (bool)
  power_management.quirk.vbemode_restore = true  (bool)
  power_management.quirk.vbestate_restore = true  (bool)
  power_management.quirk.vga_mode_3 = true  (bool)
  power_management.type = 'acpi'  (string)
  system.board.product = 'P5L-VM 1394'  (string)
  system.board.serial = 'MB-1234567890'  (string)
  system.board.vendor = 'ASUSTeK Computer INC.'  (string)
  system.board.version = 'Rev 1.xx'  (string)
  system.chassis.manufacturer = 'Chassis Manufacture'  (string)
  system.chassis.type = 'Desktop'  (string)
  system.firmware.release_date = '11/28/2006'  (string)
  system.firmware.vendor = 'American Megatrends Inc.'  (string)
  system.firmware.version = '0104'  (string)
  system.formfactor = 'desktop'  (string)
  system.hardware.primary_video.product = 10098  (0x2772)  (int)
  system.hardware.primary_video.vendor = 32902  (0x8086)  (int)
  system.hardware.product = 'System Product Name'  (string)
  system.hardware.serial = 'System Serial Number'  (string)
  system.hardware.uuid = 'A02780CB-8EFE-D511-A1E6-001BFC784390'  (string)
  system.hardware.vendor = 'System manufacturer'  (string)
  system.hardware.version = 'System Version'  (string)
  system.kernel.machine = 'i686'  (string)
  system.kernel.name = 'Linux'  (string)
  system.kernel.version = '2.6.28-11-generic'  (string)
  system.kernel.version.major = 2  (0x2)  (int)
  system.kernel.version.micro = 28  (0x1c)  (int)
  system.kernel.version.minor = 6  (0x6)  (int)

udi = '/org/freedesktop/Hal/devices/net_f6_64_b6_1e_c4_79'
  info.capabilities = {'net', 'net.bridge'} (string list)
  info.category = 'net.bridge'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Bridge Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_f6_64_b6_1e_c4_79'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/virtual/net/pan0'  (string)
  net.address = 'f6:64:b6:1e:c4:79'  (string)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.bridge.mac_address = 270912412632185  (0xf664b61ec479)  (uint64)
  net.interface = 'pan0'  (string)
  net.linux.ifindex = 3  (0x3)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
  access_control.file = '/dev/snd/timer'  (string)
  access_control.type = 'sound'  (string)
  alsa.device_file = '/dev/snd/timer'  (string)
  alsa.type = 'timer'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ALSA Timer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'  (string)
  linux.device_file = '/dev/snd/timer'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/timer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'
  access_control.file = '/dev/sequencer2'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'OSS Sequencer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'  (string)
  linux.device_file = '/dev/sequencer2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2'  (string)
  oss.device_file = '/dev/sequencer2'  (string)
  oss.type = 'sequencer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'
  access_control.file = '/dev/sequencer'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'OSS Sequencer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'  (string)
  linux.device_file = '/dev/sequencer'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/sequencer'  (string)
  oss.device_file = '/dev/sequencer'  (string)
  oss.type = 'sequencer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
  access_control.file = '/dev/snd/seq'  (string)
  access_control.type = 'sound'  (string)
  alsa.device_file = '/dev/snd/seq'  (string)
  alsa.type = 'sequencer'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ALSA Sequencer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'  (string)
  linux.device_file = '/dev/snd/seq'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/seq'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
  access_control.file = '/dev/input/event2'  (string)
  access_control.type = 'mouse'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Macintosh mouse button emulation'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'  (string)
  input.device = '/dev/input/event2'  (string)
  input.product = 'Macintosh mouse button emulation'  (string)
  input.x11_driver = 'evdev'  (string)
  linux.device_file = '/dev/input/event2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/virtual/input/input2/event2'  (string)

udi = '/org/freedesktop/Hal/devices/acpi_CPU1'
  info.capabilities = {'processor'} (string list)
  info.category = 'processor'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Intel(R) Celeron(R) CPU 2.80GHz'  (string)
  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1'  (string)
  linux.acpi_path = '/proc/acpi/processor/CPU1'  (string)
  linux.acpi_type = 1  (0x1)  (int)
  linux.hotplug_type = 4  (0x4)  (int)
  processor.can_throttle = true  (bool)
  processor.number = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/net_computer_loopback'
  info.capabilities = {'net', 'net.loopback'} (string list)
  info.category = 'net.loopback'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Loopback device Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_computer_loopback'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/virtual/net/lo'  (string)
  net.address = '00:00:00:00:00:00'  (string)
  net.arp_proto_hw_id = 772  (0x304)  (int)
  net.interface = 'lo'  (string)
  net.linux.ifindex = 1  (0x1)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
  button.has_state = false  (bool)
  button.type = 'power'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Power Button (CM)'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'  (string)
  input.device = '/dev/input/event1'  (string)
  input.product = 'Power Button (CM)'  (string)
  linux.device_file = '/dev/input/event1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
  button.has_state = false  (bool)
  button.type = 'power'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Power Button (FF)'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'  (string)
  input.device = '/dev/input/event0'  (string)
  input.product = 'Power Button (FF)'  (string)
  linux.device_file = '/dev/input/event0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_0'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'System Board'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0e'  (string)
  pnp.description = 'System Board'  (string)
  pnp.id = 'PNP0c01'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_3'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0d'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_2'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0c'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
  info.linux.driver = 'serial'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '16550A-compatible COM port'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0b'  (string)
  pnp.description = '16550A-compatible COM port'  (string)
  pnp.id = 'PNP0501'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
  access_control.file = '/dev/ttyS0'  (string)
  access_control.type = 'modem'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'serial', 'access_control'} (string list)
  info.category = 'serial'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501'  (string)
  info.product = '16550A-compatible COM port'  (string)
  info.subsystem = 'tty'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'  (string)
  linux.device_file = '/dev/ttyS0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'tty'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0b/tty/ttyS0'  (string)
  serial.device = '/dev/ttyS0'  (string)
  serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501'  (string)
  serial.port = 0  (0x0)  (int)
  serial.type = 'platform'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0a'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0103'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PnP Device (PNP0103)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:09'  (string)
  pnp.id = 'PNP0103'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:08'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:07'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'
  info.linux.driver = 'parport_pc'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ECP printer port'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:06'  (string)
  pnp.description = 'ECP printer port'  (string)
  pnp.id = 'PNP0401'  (string)

udi = '/org/freedesktop/Hal/devices/ppdev_parport0'
  access_control.file = '/dev/parport0'  (string)
  access_control.type = 'ppdev'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'ppdev', 'access_control'} (string list)
  info.category = 'ppdev'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0401'  (string)
  info.product = 'Parallel Port Device'  (string)
  info.subsystem = 'ppdev'  (string)
  info.udi = '/org/freedesktop/Hal/devices/ppdev_parport0'  (string)
  linux.device_file = '/dev/parport0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'ppdev'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:06/ppdev/parport0'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Math Coprocessor'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:05'  (string)
  pnp.description = 'Math Coprocessor'  (string)
  pnp.id = 'PNP0c04'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT-style speaker sound'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:04'  (string)
  pnp.description = 'AT-style speaker sound'  (string)
  pnp.id = 'PNP0800'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
  info.linux.driver = 'rtc_cmos'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT Real-Time Clock'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:03'  (string)
  pnp.description = 'AT Real-Time Clock'  (string)
  pnp.id = 'PNP0b00'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT DMA Controller'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:02'  (string)
  pnp.description = 'AT DMA Controller'  (string)
  pnp.id = 'PNP0200'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'System Board'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:01'  (string)
  pnp.description = 'System Board'  (string)
  pnp.id = 'PNP0c01'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PnP Device (PNP0a08)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:00'  (string)
  pnp.id = 'PNP0a08'  (string)

udi = '/org/freedesktop/Hal/devices/platform_serial8250'
  info.linux.driver = 'serial8250'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (serial8250)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_serial8250'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/serial8250'  (string)
  platform.id = 'serial8250'  (string)

udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
  info.linux.driver = 'pcspkr'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (pcspkr)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/pcspkr'  (string)
  platform.id = 'pcspkr'  (string)

udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
  info.capabilities = {'input'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  info.product = 'PC Speaker'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'  (string)
  input.device = '/dev/input/event5'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  input.product = 'PC Speaker'  (string)
  linux.device_file = '/dev/input/event5'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input5/event5'  (string)

udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt'
  info.linux.driver = 'iTCO_wdt'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (iTCO_wdt)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/iTCO_wdt'  (string)
  platform.id = 'iTCO_wdt'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042'
  info.linux.driver = 'i8042'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (i8042)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042'  (string)
  platform.id = 'i8042'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.product = 'i8042 AUX port'  (string)
  info.subsystem = 'serio'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'serio'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio1'  (string)
  serio.description = 'i8042 AUX port'  (string)
  serio.id = 'serio1'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.product = 'i8042 KBD port'  (string)
  info.subsystem = 'serio'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'serio'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio0'  (string)
  serio.description = 'i8042 KBD port'  (string)
  serio.id = 'serio0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_eisa_0'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (eisa.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_eisa_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/eisa.0'  (string)
  platform.id = 'eisa.0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (Fixed MDIO bus.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/Fixed MDIO bus.0'  (string)
  platform.id = 'Fixed MDIO bus.0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27da'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801G (ICH7 Family) SMBus Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27da'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 5  (0x5)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3'  (string)
  pci.product = '82801G (ICH7 Family) SMBus Controller'  (string)
  pci.product_id = 10202  (0x27da)  (int)
  pci.subsys_product_id = 33145  (0x8179)  (int)
  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
  pci.subsys_vendor_id = 4163  (0x1043)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_27c0'
  info.linux.driver = 'ata_piix'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801GB/GR/GH (ICH7 Family) SATA IDE Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c0'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2'  (string)
  pci.device_class = 1  (0x1)  (int)
  pci.device_protocol = 143  (0x8f)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2'  (string)
  pci.product = '82801GB/GR/GH (ICH7 Family) SATA IDE Controller'  (string)
  pci.product_id = 10176  (0x27c0)  (int)
  pci.subsys_product_id = 9729  (0x2601)  (int)
  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
  pci.subsys_vendor_id = 4163  (0x1043)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host_0'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c0'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host3/scsi_host/host3'  (string)
  scsi_host.host = 3  (0x3)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c0'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2'  (string)
  scsi_host.host = 2  (0x2)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/scsi_host/host2'  (string)
  scsi_host.host = 2  (0x2)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host_scsi_device_lun0'
  info.linux.driver = 'sd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host_scsi_device_lun0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 2  (0x2)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'ST3160215AS'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'disk'  (string)
  scsi.vendor = 'ATA'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3160215AS_5RA264DE'
  block.device = '/dev/sda'  (string)
  block.is_volume = false  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3160215AS_5RA264DE'  (string)
  info.capabilities = {'storage', 'block'} (string list)
  info.category = 'storage'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host_scsi_device_lun0'  (string)
  info.product = 'ST3160215AS'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3160215AS_5RA264DE'  (string)
  info.vendor = 'ATA'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda'  (string)
  storage.automount_enabled_hint = false  (bool)
  storage.bus = 'pci'  (string)
  storage.drive_type = 'disk'  (string)
  storage.firmware_version = '3.AA'  (string)
  storage.hotpluggable = false  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = false  (bool)
  storage.model = 'ST3160215AS'  (string)
  storage.no_partitions_hint = false  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
  storage.partitioning_scheme = 'mbr'  (string)
  storage.removable = false  (bool)
  storage.removable.media_available = true  (bool)
  storage.removable.media_size = 160041885696  (0x25433d6000)  (uint64)
  storage.requires_eject = false  (bool)
  storage.serial = 'SATA_ST3160215AS_5RA264DE'  (string)
  storage.size = 160041885696  (0x25433d6000)  (uint64)
  storage.vendor = 'ATA'  (string)

udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024'
  block.device = '/dev/sda2'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 2  (0x2)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3160215AS_5RA264DE'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3160215AS_5RA264DE'  (string)
  info.product = 'Volume'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda/sda2'  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = ''  (string)
  volume.fsusage = 'partitiontable'  (string)
  volume.fsversion = ''  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 2  (0x2)  (uint64)
  volume.partition.flags = {} (string list)
  volume.partition.label = ''  (string)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 2  (0x2)  (int)
  volume.partition.scheme = 'mbr'  (string)
  volume.partition.start = 156963018240  (0x248bb99600)  (uint64)
  volume.partition.type = '0x05'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 1024  (0x400)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_11d44f8d_32f3_4803_bbc2_d15f267c05ac'
  block.device = '/dev/sda5'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 5  (0x5)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3160215AS_5RA264DE'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3160215AS_5RA264DE'  (string)
  info.product = 'Volume (swap)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_11d44f8d_32f3_4803_bbc2_d15f267c05ac'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda/sda5'  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'swap'  (string)
  volume.fsusage = 'other'  (string)
  volume.fsversion = '2'  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 6008247  (0x5badb7)  (uint64)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 5  (0x5)  (int)
  volume.partition.start = 156963050496  (0x248bba1400)  (uint64)
  volume.size = 3076222464  (0xb75b6e00)  (uint64)
  volume.uuid = '11d44f8d-32f3-4803-bbc2-d15f267c05ac'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_1cab7414_c067_4852_b56c_9aefdb02b093'
  block.device = '/dev/sda1'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 1  (0x1)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3160215AS_5RA264DE'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3160215AS_5RA264DE'  (string)
  info.product = 'Volume (ext3)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_1cab7414_c067_4852_b56c_9aefdb02b093'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda/sda1'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ext3'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '1.0'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
  volume.mount_point = '/'  (string)
  volume.num_blocks = 306568332  (0x1245dc8c)  (uint64)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 1  (0x1)  (int)
  volume.partition.start = 32256  (0x7e00)  (uint64)
  volume.size = 156962985984  (0x248bb91800)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = '1cab7414-c067-4852-b56c-9aefdb02b093'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host_scsi_device_lun0_scsi_generic'
  info.capabilities = {'scsi_generic'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host_scsi_device_lun0'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.subsystem = 'scsi_generic'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host_scsi_device_lun0_scsi_generic'  (string)
  linux.device_file = '/dev/sg1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/scsi_generic/sg1'  (string)
  scsi_generic.device = '/dev/sg1'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27df'
  info.linux.driver = 'ata_piix'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801G (ICH7 Family) IDE Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1'  (string)
  pci.device_class = 1  (0x1)  (int)
  pci.device_protocol = 138  (0x8a)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1'  (string)
  pci.product = '82801G (ICH7 Family) IDE Controller'  (string)
  pci.product_id = 10207  (0x27df)  (int)
  pci.subsys_product_id = 33145  (0x8179)  (int)
  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
  pci.subsys_vendor_id = 4163  (0x1043)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_0'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host1/scsi_host/host1'  (string)
  scsi_host.host = 1  (0x1)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0'  (string)
  scsi_host.host = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/scsi_host/host0'  (string)
  scsi_host.host = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_device_lun0'
  info.linux.driver = 'sr'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_device_lun0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:1/0:0:1:0'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 0  (0x0)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'DVD-ROM GDR-H30N'  (string)
  scsi.target = 1  (0x1)  (int)
  scsi.type = 'cdrom'  (string)
  scsi.vendor = 'HL-DT-ST'  (string)

udi = '/org/freedesktop/Hal/devices/storage_model_DVD_ROM_GDR_H30N'
  access_control.file = '/dev/sr0'  (string)
  access_control.type = 'cdrom'  (string)
  block.device = '/dev/sr0'  (string)
  block.is_volume = false  (bool)
  block.major = 11  (0xb)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVD_ROM_GDR_H30N'  (string)
  info.addons = {'hald-addon-storage'} (string list)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control'} (string list)
  info.category = 'storage'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_device_lun0'  (string)
  info.product = 'DVD-ROM GDR-H30N'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_model_DVD_ROM_GDR_H30N'  (string)
  info.vendor = 'HL-DT-ST'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:1/0:0:1:0/block/sr0'  (string)
  org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
  org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
  org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'pci'  (string)
  storage.cdrom.bd = false  (bool)
  storage.cdrom.bdr = false  (bool)
  storage.cdrom.bdre = false  (bool)
  storage.cdrom.cdr = false  (bool)
  storage.cdrom.cdrw = false  (bool)
  storage.cdrom.dvd = true  (bool)
  storage.cdrom.dvdplusr = false  (bool)
  storage.cdrom.dvdplusrdl = false  (bool)
  storage.cdrom.dvdplusrw = false  (bool)
  storage.cdrom.dvdplusrwdl = false  (bool)
  storage.cdrom.dvdr = false  (bool)
  storage.cdrom.dvdram = false  (bool)
  storage.cdrom.dvdrdl = false  (bool)
  storage.cdrom.dvdrw = false  (bool)
  storage.cdrom.hddvd = false  (bool)
  storage.cdrom.hddvdr = false  (bool)
  storage.cdrom.hddvdrw = false  (bool)
  storage.cdrom.mo = false  (bool)
  storage.cdrom.mrw = true  (bool)
  storage.cdrom.mrw_w = true  (bool)
  storage.cdrom.read_speed = 9172  (0x23d4)  (int)
  storage.cdrom.support_media_changed = true  (bool)
  storage.cdrom.support_multisession = true  (bool)
  storage.cdrom.write_speed = 706  (0x2c2)  (int)
  storage.drive_type = 'cdrom'  (string)
  storage.firmware_version = '1.00'  (string)
  storage.hotpluggable = false  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = true  (bool)
  storage.model = 'DVD-ROM GDR-H30N'  (string)
  storage.no_partitions_hint = true  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
  storage.partitioning_scheme = ''  (string)
  storage.removable = true  (bool)
  storage.removable.media_available = false  (bool)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = true  (bool)
  storage.size = 0  (0x0)  (uint64)
  storage.vendor = 'HL-DT-ST'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_device_lun0_scsi_generic'
  access_control.file = '/dev/sg0'  (string)
  access_control.type = 'cdrom'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'scsi_generic', 'access_control'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_device_lun0'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.subsystem = 'scsi_generic'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_device_lun0_scsi_generic'  (string)
  linux.device_file = '/dev/sg0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:1/0:0:1:0/scsi_generic/sg0'  (string)
  scsi_generic.device = '/dev/sg0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27b8'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801GB/GR (ICH7 Family) LPC Interface Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27b8'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'  (string)
  pci.product = '82801GB/GR (ICH7 Family) LPC Interface Bridge'  (string)
  pci.product_id = 10168  (0x27b8)  (int)
  pci.subsys_product_id = 33145  (0x8179)  (int)
  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
  pci.subsys_vendor_id = 4163  (0x1043)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_244e'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801 PCI Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_244e'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 1  (0x1)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'  (string)
  pci.product = '82801 PCI Bridge'  (string)
  pci.product_id = 9294  (0x244e)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_3044'
  info.linux.driver = 'ohci1394'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e'  (string)
  info.product = 'VT6306 Fire II IEEE 1394 OHCI Link Layer Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3044'  (string)
  info.vendor = 'VIA Technologies, Inc.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:03.0'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 16  (0x10)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:03.0'  (string)
  pci.product = 'VT6306 Fire II IEEE 1394 OHCI Link Layer Controller'  (string)
  pci.product_id = 12356  (0x3044)  (int)
  pci.subsys_product_id = 33278  (0x81fe)  (int)
  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
  pci.subsys_vendor_id = 4163  (0x1043)  (int)
  pci.vendor = 'VIA Technologies, Inc.'  (string)
  pci.vendor_id = 4358  (0x1106)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_27cc'
  info.linux.driver = 'ehci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801G (ICH7 Family) USB2 EHCI Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27cc'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 32  (0x20)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7'  (string)
  pci.product = '82801G (ICH7 Family) USB2 EHCI Controller'  (string)
  pci.product_id = 10188  (0x27cc)  (int)
  pci.subsys_product_id = 33145  (0x8179)  (int)
  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
  pci.subsys_vendor_id = 4163  (0x1043)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27cc'  (string)
  info.product = '2.0 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/001/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1'  (string)
  usb_device.bus_number = 1  (0x1)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 8  (0x8)  (int)
  usb_device.product = '2.0 root hub'  (string)
  usb_device.product_id = 2  (0x2)  (int)
  usb_device.serial = '0000:00:1d.7'  (string)
  usb_device.speed = 480.0 (480) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'  (string)
  info.product = 'Card Reader'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700'  (string)
  info.vendor = 'Realtek Semiconductor Corp.'  (string)
  linux.device_file = '/dev/bus/usb/001/003'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7'  (string)
  usb_device.bus_number = 1  (0x1)  (int)
  usb_device.can_wake_up = false  (bool)
  usb_device.configuration = 'CARD READER'  (string)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 0  (0x0)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 4386  (0x1122)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = false  (bool)
  usb_device.linux.device_number = 3  (0x3)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7'  (string)
  usb_device.max_power = 500  (0x1f4)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product = 'Card Reader'  (string)
  usb_device.product_id = 273  (0x111)  (int)
  usb_device.serial = '20021111153705700'  (string)
  usb_device.speed = 480.0 (480) (double)
  usb_device.vendor = 'Realtek Semiconductor Corp.'  (string)
  usb_device.vendor_id = 3034  (0xbda)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0'
  info.linux.driver = 'usb-storage'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700'  (string)
  info.product = 'USB Mass Storage Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = false  (bool)
  usb.configuration = 'CARD READER'  (string)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 4386  (0x1122)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 8  (0x8)  (int)
  usb.interface.description = 'Bulk-In, Bulk-Out, Interface'  (string)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 80  (0x50)  (int)
  usb.interface.subclass = 6  (0x6)  (int)
  usb.is_self_powered = false  (bool)
  usb.linux.device_number = 3  (0x3)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0'  (string)
  usb.max_power = 500  (0x1f4)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Mass Storage Interface'  (string)
  usb.product_id = 273  (0x111)  (int)
  usb.serial = '20021111153705700'  (string)
  usb.speed = 480.0 (480) (double)
  usb.vendor = 'Realtek Semiconductor Corp.'  (string)
  usb.vendor_id = 3034  (0xbda)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/host4'  (string)
  scsi_host.host = 4  (0x4)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/host4/scsi_host/host4'  (string)
  scsi_host.host = 4  (0x4)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun3'
  info.linux.driver = 'sd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/host4/target4:0:0/4:0:0:3'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 4  (0x4)  (int)
  scsi.lun = 3  (0x3)  (int)
  scsi.model = 'MS/MS-Pro'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'disk'  (string)
  scsi.vendor = 'Generic-'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_Generic__MS_MS_Pro_20021111153705700_0_3'
  access_control.file = '/dev/sde'  (string)
  access_control.type = 'removable-block'  (string)
  block.device = '/dev/sde'  (string)
  block.is_volume = false  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 64  (0x40)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Generic__MS_MS_Pro_20021111153705700_0_3'  (string)
  info.addons = {'hald-addon-storage'} (string list)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'storage', 'block', 'access_control'} (string list)
  info.category = 'storage'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun3'  (string)
  info.product = 'MS/MS-Pro'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_Generic__MS_MS_Pro_20021111153705700_0_3'  (string)
  info.vendor = 'Generic-'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/host4/target4:0:0/4:0:0:3/block/sde'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'usb'  (string)
  storage.drive_type = 'disk'  (string)
  storage.firmware_version = '1.00'  (string)
  storage.hotpluggable = true  (bool)
  storage.lun = 3  (0x3)  (int)
  storage.media_check_enabled = true  (bool)
  storage.model = 'MS/MS-Pro'  (string)
  storage.no_partitions_hint = false  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0'  (string)
  storage.partitioning_scheme = ''  (string)
  storage.removable = true  (bool)
  storage.removable.media_available = false  (bool)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = false  (bool)
  storage.serial = 'Generic-_MS_MS-Pro_20021111153705700-0:3'  (string)
  storage.size = 0  (0x0)  (uint64)
  storage.vendor = 'Generic-'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun3_scsi_generic'
  info.capabilities = {'scsi_generic'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun3'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.subsystem = 'scsi_generic'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun3_scsi_generic'  (string)
  linux.device_file = '/dev/sg5'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/host4/target4:0:0/4:0:0:3/scsi_generic/sg5'  (string)
  scsi_generic.device = '/dev/sg5'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun2'
  info.linux.driver = 'sd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/host4/target4:0:0/4:0:0:2'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 4  (0x4)  (int)
  scsi.lun = 2  (0x2)  (int)
  scsi.model = 'SD/MMC'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'disk'  (string)
  scsi.vendor = 'Generic-'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_Generic__SD_MMC_20021111153705700_0_2'
  access_control.file = '/dev/sdd'  (string)
  access_control.type = 'removable-block'  (string)
  block.device = '/dev/sdd'  (string)
  block.is_volume = false  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 48  (0x30)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Generic__SD_MMC_20021111153705700_0_2'  (string)
  info.addons = {'hald-addon-storage'} (string list)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'storage', 'block', 'access_control'} (string list)
  info.category = 'storage'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun2'  (string)
  info.product = 'SD/MMC'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_Generic__SD_MMC_20021111153705700_0_2'  (string)
  info.vendor = 'Generic-'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/host4/target4:0:0/4:0:0:2/block/sdd'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'usb'  (string)
  storage.drive_type = 'disk'  (string)
  storage.firmware_version = '1.00'  (string)
  storage.hotpluggable = true  (bool)
  storage.lun = 2  (0x2)  (int)
  storage.media_check_enabled = true  (bool)
  storage.model = 'SD/MMC'  (string)
  storage.no_partitions_hint = false  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0'  (string)
  storage.partitioning_scheme = ''  (string)
  storage.removable = true  (bool)
  storage.removable.media_available = false  (bool)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = false  (bool)
  storage.serial = 'Generic-_SD_MMC_20021111153705700-0:2'  (string)
  storage.size = 0  (0x0)  (uint64)
  storage.vendor = 'Generic-'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun2_scsi_generic'
  info.capabilities = {'scsi_generic'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun2'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.subsystem = 'scsi_generic'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun2_scsi_generic'  (string)
  linux.device_file = '/dev/sg4'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/host4/target4:0:0/4:0:0:2/scsi_generic/sg4'  (string)
  scsi_generic.device = '/dev/sg4'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun1'
  info.linux.driver = 'sd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/host4/target4:0:0/4:0:0:1'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 4  (0x4)  (int)
  scsi.lun = 1  (0x1)  (int)
  scsi.model = 'SM/xD-Picture'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'disk'  (string)
  scsi.vendor = 'Generic-'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_Generic__SM_xD_Picture_20021111153705700_0_1'
  access_control.file = '/dev/sdc'  (string)
  access_control.type = 'removable-block'  (string)
  block.device = '/dev/sdc'  (string)
  block.is_volume = false  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 32  (0x20)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Generic__SM_xD_Picture_20021111153705700_0_1'  (string)
  info.addons = {'hald-addon-storage'} (string list)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'storage', 'block', 'access_control'} (string list)
  info.category = 'storage'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun1'  (string)
  info.product = 'SM/xD-Picture'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_Generic__SM_xD_Picture_20021111153705700_0_1'  (string)
  info.vendor = 'Generic-'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/host4/target4:0:0/4:0:0:1/block/sdc'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'usb'  (string)
  storage.drive_type = 'disk'  (string)
  storage.firmware_version = '1.00'  (string)
  storage.hotpluggable = true  (bool)
  storage.lun = 1  (0x1)  (int)
  storage.media_check_enabled = true  (bool)
  storage.model = 'SM/xD-Picture'  (string)
  storage.no_partitions_hint = false  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0'  (string)
  storage.partitioning_scheme = ''  (string)
  storage.removable = true  (bool)
  storage.removable.media_available = false  (bool)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = false  (bool)
  storage.serial = 'Generic-_SM_xD-Picture_20021111153705700-0:1'  (string)
  storage.size = 0  (0x0)  (uint64)
  storage.vendor = 'Generic-'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun1_scsi_generic'
  info.capabilities = {'scsi_generic'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun1'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.subsystem = 'scsi_generic'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun1_scsi_generic'  (string)
  linux.device_file = '/dev/sg3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/host4/target4:0:0/4:0:0:1/scsi_generic/sg3'  (string)
  scsi_generic.device = '/dev/sg3'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun0'
  info.linux.driver = 'sd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/host4/target4:0:0/4:0:0:0'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 4  (0x4)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'Compact Flash'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'disk'  (string)
  scsi.vendor = 'Generic-'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_Generic__Compact_Flash_20021111153705700_0_0'
  access_control.file = '/dev/sdb'  (string)
  access_control.type = 'removable-block'  (string)
  block.device = '/dev/sdb'  (string)
  block.is_volume = false  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 16  (0x10)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Generic__Compact_Flash_20021111153705700_0_0'  (string)
  info.addons = {'hald-addon-storage'} (string list)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'storage', 'block', 'access_control'} (string list)
  info.category = 'storage'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun0'  (string)
  info.product = 'Compact Flash'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_Generic__Compact_Flash_20021111153705700_0_0'  (string)
  info.vendor = 'Generic-'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/host4/target4:0:0/4:0:0:0/block/sdb'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'usb'  (string)
  storage.drive_type = 'disk'  (string)
  storage.firmware_version = '1.00'  (string)
  storage.hotpluggable = true  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = true  (bool)
  storage.model = 'Compact Flash'  (string)
  storage.no_partitions_hint = false  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0'  (string)
  storage.partitioning_scheme = ''  (string)
  storage.removable = true  (bool)
  storage.removable.media_available = false  (bool)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = false  (bool)
  storage.serial = 'Generic-_Compact_Flash_20021111153705700-0:0'  (string)
  storage.size = 0  (0x0)  (uint64)
  storage.vendor = 'Generic-'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun0_scsi_generic'
  info.capabilities = {'scsi_generic'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun0'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.subsystem = 'scsi_generic'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_111_20021111153705700_if0_scsi_host_scsi_device_lun0_scsi_generic'  (string)
  linux.device_file = '/dev/sg2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/host4/target4:0:0/4:0:0:0/scsi_generic/sg2'  (string)
  scsi_generic.device = '/dev/sg2'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 8  (0x8)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 2  (0x2)  (int)
  usb.serial = '0000:00:1d.7'  (string)
  usb.speed = 480.0 (480) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_27cb'
  info.linux.driver = 'uhci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801G (ICH7 Family) USB UHCI Controller #4'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27cb'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3'  (string)
  pci.product = '82801G (ICH7 Family) USB UHCI Controller #4'  (string)
  pci.product_id = 10187  (0x27cb)  (int)
  pci.subsys_product_id = 33145  (0x8179)  (int)
  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
  pci.subsys_vendor_id = 4163  (0x1043)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27cb'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/005/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5'  (string)
  usb_device.bus_number = 5  (0x5)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:1d.3'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0'  (string)
  usb.bus_number = 5  (0x5)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:1d.3'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_27ca'
  info.linux.driver = 'uhci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801G (ICH7 Family) USB UHCI Controller #3'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27ca'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2'  (string)
  pci.product = '82801G (ICH7 Family) USB UHCI Controller #3'  (string)
  pci.product_id = 10186  (0x27ca)  (int)
  pci.subsys_product_id = 33145  (0x8179)  (int)
  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
  pci.subsys_vendor_id = 4163  (0x1043)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27ca'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/004/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4'  (string)
  usb_device.bus_number = 4  (0x4)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:1d.2'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0'  (string)
  usb.bus_number = 4  (0x4)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:1d.2'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_27c9'
  info.linux.driver = 'uhci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801G (ICH7 Family) USB UHCI Controller #2'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c9'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'  (string)
  pci.product = '82801G (ICH7 Family) USB UHCI Controller #2'  (string)
  pci.product_id = 10185  (0x27c9)  (int)
  pci.subsys_product_id = 33145  (0x8179)  (int)
  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
  pci.subsys_vendor_id = 4163  (0x1043)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c9'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/003/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3'  (string)
  usb_device.bus_number = 3  (0x3)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:1d.1'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'  (string)
  info.product = 'LX710 Cordless Desktop Laser'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial'  (string)
  info.vendor = 'Logitech, Inc.'  (string)
  linux.device_file = '/dev/bus/usb/003/002'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1'  (string)
  usb_device.bus_number = 3  (0x3)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 0  (0x0)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 14352  (0x3810)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = false  (bool)
  usb_device.linux.device_number = 2  (0x2)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1'  (string)
  usb_device.max_power = 98  (0x62)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 2  (0x2)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product = 'LX710 Cordless Desktop Laser'  (string)
  usb_device.product_id = 50455  (0xc517)  (int)
  usb_device.speed = 1.5 (1.5) (double)
  usb_device.vendor = 'Logitech, Inc.'  (string)
  usb_device.vendor_id = 1133  (0x46d)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if1'
  info.linux.driver = 'usbhid'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial'  (string)
  info.product = 'USB HID Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1'  (string)
  usb.bus_number = 3  (0x3)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 14352  (0x3810)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 3  (0x3)  (int)
  usb.interface.number = 1  (0x1)  (int)
  usb.interface.protocol = 2  (0x2)  (int)
  usb.interface.subclass = 1  (0x1)  (int)
  usb.is_self_powered = false  (bool)
  usb.linux.device_number = 2  (0x2)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1'  (string)
  usb.max_power = 98  (0x62)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 2  (0x2)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB HID Interface'  (string)
  usb.product_id = 50455  (0xc517)  (int)
  usb.speed = 1.5 (1.5) (double)
  usb.vendor = 'Logitech, Inc.'  (string)
  usb.vendor_id = 1133  (0x46d)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if1_logicaldev_input'
  access_control.file = '/dev/input/event4'  (string)
  access_control.type = 'mouse'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.callouts.add = {'debian-setup-keyboard', 'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'input', 'input.keys', 'input.mouse', 'button', 'access_control'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if1'  (string)
  info.product = 'Logitech USB Receiver'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if1_logicaldev_input'  (string)
  input.device = '/dev/input/event4'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if1'  (string)
  input.product = 'Logitech USB Receiver'  (string)
  input.x11_driver = 'evdev'  (string)
  input.xkb.layout = 'es'  (string)
  input.xkb.model = 'pc105'  (string)
  input.xkb.rules = 'evdev'  (string)
  input.xkb.variant = 'cat'  (string)
  linux.device_file = '/dev/input/event4'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input4/event4'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if0'
  info.linux.driver = 'usbhid'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial'  (string)
  info.product = 'USB HID Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0'  (string)
  usb.bus_number = 3  (0x3)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 14352  (0x3810)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 3  (0x3)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 1  (0x1)  (int)
  usb.interface.subclass = 1  (0x1)  (int)
  usb.is_self_powered = false  (bool)
  usb.linux.device_number = 2  (0x2)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0'  (string)
  usb.max_power = 98  (0x62)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 2  (0x2)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB HID Interface'  (string)
  usb.product_id = 50455  (0xc517)  (int)
  usb.speed = 1.5 (1.5) (double)
  usb.vendor = 'Logitech, Inc.'  (string)
  usb.vendor_id = 1133  (0x46d)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if0_logicaldev_input'
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.callouts.add = {'debian-setup-keyboard'} (string list)
  info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if0'  (string)
  info.product = 'Logitech USB Receiver'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if0_logicaldev_input'  (string)
  input.device = '/dev/input/event3'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if0'  (string)
  input.product = 'Logitech USB Receiver'  (string)
  input.x11_driver = 'evdev'  (string)
  input.xkb.layout = 'es'  (string)
  input.xkb.model = 'pc105'  (string)
  input.xkb.rules = 'evdev'  (string)
  input.xkb.variant = 'cat'  (string)
  linux.device_file = '/dev/input/event3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3/event3'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0'  (string)
  usb.bus_number = 3  (0x3)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:1d.1'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_27c8'
  info.linux.driver = 'uhci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801G (ICH7 Family) USB UHCI Controller #1'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c8'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'  (string)
  pci.product = '82801G (ICH7 Family) USB UHCI Controller #1'  (string)
  pci.product_id = 10184  (0x27c8)  (int)
  pci.subsys_product_id = 33145  (0x8179)  (int)
  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
  pci.subsys_vendor_id = 4163  (0x1043)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c8'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/002/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2'  (string)
  usb_device.bus_number = 2  (0x2)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:1d.0'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0'  (string)
  usb.bus_number = 2  (0x2)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:1d.0'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d2'
  info.linux.driver = 'pcieport-driver'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801G (ICH7 Family) PCI Express Port 2'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d2'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1'  (string)
  pci.product = '82801G (ICH7 Family) PCI Express Port 2'  (string)
  pci.product_id = 10194  (0x27d2)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1969_1048'
  info.linux.driver = 'atl1'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d2'  (string)
  info.product = 'L1 Gigabit Ethernet Adapter'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1969_1048'  (string)
  info.vendor = 'Attansic Technology Corp.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0'  (string)
  pci.device_class = 2  (0x2)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0'  (string)
  pci.product = 'L1 Gigabit Ethernet Adapter'  (string)
  pci.product_id = 4168  (0x1048)  (int)
  pci.subsys_product_id = 33318  (0x8226)  (int)
  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
  pci.subsys_vendor_id = 4163  (0x1043)  (int)
  pci.vendor = 'Attansic Technology Corp.'  (string)
  pci.vendor_id = 6505  (0x1969)  (int)

udi = '/org/freedesktop/Hal/devices/net_00_1b_fc_78_43_90'
  info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list)
  info.category = 'net.80203'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_1969_1048'  (string)
  info.product = 'Networking Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_00_1b_fc_78_43_90'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0'  (string)
  net.80203.mac_address = 120199857040  (0x1bfc784390)  (uint64)
  net.address = '00:1b:fc:78:43:90'  (string)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.interface = 'eth0'  (string)
  net.linux.ifindex = 2  (0x2)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/pci_1969_1048'  (string)
  org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d0'
  info.linux.driver = 'pcieport-driver'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801G (ICH7 Family) PCI Express Port 1'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d0'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0'  (string)
  pci.product = '82801G (ICH7 Family) PCI Express Port 1'  (string)
  pci.product_id = 10192  (0x27d0)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8'
  info.linux.driver = 'HDA Intel'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801G (ICH7 Family) High Definition Audio Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0'  (string)
  pci.device_class = 4  (0x4)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0'  (string)
  pci.product = '82801G (ICH7 Family) High Definition Audio Controller'  (string)
  pci.product_id = 10200  (0x27d8)  (int)
  pci.subsys_product_id = 33353  (0x8249)  (int)
  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
  pci.subsys_vendor_id = 4163  (0x1043)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'
  info.capabilities = {'sound'} (string list)
  info.category = 'sound'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8'  (string)
  info.product = 'HDA Intel Sound Card'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0'  (string)
  sound.card = 0  (0x0)  (int)
  sound.card_id = 'HDA Intel'  (string)
  sound.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_capture_2'
  access_control.file = '/dev/snd/pcmC0D2c'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA Intel'  (string)
  alsa.device = 2  (0x2)  (int)
  alsa.device_file = '/dev/snd/pcmC0D2c'  (string)
  alsa.device_id = 'ALC883 Analog'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'capture'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'  (string)
  info.product = 'ALC883 Analog ALSA Capture Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_capture_2'  (string)
  linux.device_file = '/dev/snd/pcmC0D2c'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D2c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_playback_1'
  access_control.file = '/dev/snd/pcmC0D1p'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA Intel'  (string)
  alsa.device = 1  (0x1)  (int)
  alsa.device_file = '/dev/snd/pcmC0D1p'  (string)
  alsa.device_id = 'ALC883 Digital'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'playback'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'  (string)
  info.product = 'ALC883 Digital ALSA Playback Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_playback_1'  (string)
  linux.device_file = '/dev/snd/pcmC0D1p'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D1p'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_capture_1'
  access_control.file = '/dev/snd/pcmC0D1c'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA Intel'  (string)
  alsa.device = 1  (0x1)  (int)
  alsa.device_file = '/dev/snd/pcmC0D1c'  (string)
  alsa.device_id = 'ALC883 Digital'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'capture'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'  (string)
  info.product = 'ALC883 Digital ALSA Capture Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_capture_1'  (string)
  linux.device_file = '/dev/snd/pcmC0D1c'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D1c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_playback_0'
  access_control.file = '/dev/snd/pcmC0D0p'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA Intel'  (string)
  alsa.device = 0  (0x0)  (int)
  alsa.device_file = '/dev/snd/pcmC0D0p'  (string)
  alsa.device_id = 'ALC883 Analog'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'playback'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'  (string)
  info.product = 'ALC883 Analog ALSA Playback Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_playback_0'  (string)
  linux.device_file = '/dev/snd/pcmC0D0p'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0p'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_capture_0'
  access_control.file = '/dev/snd/pcmC0D0c'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA Intel'  (string)
  alsa.device = 0  (0x0)  (int)
  alsa.device_file = '/dev/snd/pcmC0D0c'  (string)
  alsa.device_id = 'ALC883 Analog'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'capture'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'  (string)
  info.product = 'ALC883 Analog ALSA Capture Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_capture_0'  (string)
  linux.device_file = '/dev/snd/pcmC0D0c'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_mixer__1'
  access_control.file = '/dev/mixer'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'  (string)
  info.product = 'ALC883 Analog OSS Control Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_mixer__1'  (string)
  linux.device_file = '/dev/mixer'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/mixer'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'HDA Intel'  (string)
  oss.device_file = '/dev/mixer'  (string)
  oss.device_id = 'ALC883 Analog'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'  (string)
  oss.type = 'mixer'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0_0'
  access_control.file = '/dev/dsp'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'  (string)
  info.product = 'ALC883 Analog OSS PCM Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0_0'  (string)
  linux.device_file = '/dev/dsp'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/dsp'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'HDA Intel'  (string)
  oss.device = 0  (0x0)  (int)
  oss.device_file = '/dev/dsp'  (string)
  oss.device_id = 'ALC883 Analog'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'  (string)
  oss.type = 'pcm'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_control__1'
  access_control.file = '/dev/snd/controlC0'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA Intel'  (string)
  alsa.device_file = '/dev/snd/controlC0'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'  (string)
  alsa.type = 'control'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'  (string)
  info.product = 'HDA Intel ALSA Control Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_control__1'  (string)
  linux.device_file = '/dev/snd/controlC0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/controlC0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0'
  access_control.file = '/dev/audio'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'  (string)
  info.product = 'ALC883 Analog OSS PCM Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0'  (string)
  linux.device_file = '/dev/audio'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/audio'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'HDA Intel'  (string)
  oss.device = 0  (0x0)  (int)
  oss.device_file = '/dev/audio'  (string)
  oss.device_id = 'ALC883 Analog'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'  (string)
  oss.type = 'pcm'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_1'
  access_control.file = '/dev/adsp'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'  (string)
  info.product = 'ALC883 Analog OSS PCM Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_1'  (string)
  linux.device_file = '/dev/adsp'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/adsp'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'HDA Intel'  (string)
  oss.device = 1  (0x1)  (int)
  oss.device_file = '/dev/adsp'  (string)
  oss.device_id = 'ALC883 Analog'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'  (string)
  oss.type = 'pcm'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2772'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82945G/GZ Integrated Graphics Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2772'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'  (string)
  pci.device_class = 3  (0x3)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'  (string)
  pci.product = '82945G/GZ Integrated Graphics Controller'  (string)
  pci.product_id = 10098  (0x2772)  (int)
  pci.subsys_product_id = 33146  (0x817a)  (int)
  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
  pci.subsys_vendor_id = 4163  (0x1043)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2770'
  info.linux.driver = 'agpgart-intel'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82945G/GZ/P/PL Memory Controller Hub'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2770'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
  pci.product = '82945G/GZ/P/PL Memory Controller Hub'  (string)
  pci.product_id = 10096  (0x2770)  (int)
  pci.subsys_product_id = 33146  (0x817a)  (int)
  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
  pci.subsys_vendor_id = 4163  (0x1043)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/fuse'
  access_control.file = '/dev/fuse'  (string)
  access_control.type = 'camera'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'access_control'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2770'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/fuse'  (string)


Dumped 113 device(s) from the Global Device List.
------------------------------------------------